Error -:  AIP-50904:  ReferTo message not found

Hi,
We have 3 windows system acting as TP's (TP1, TP2 and TP3).
When the message is fired from TP1, it reaches TP2 and TP2 sends back an acknowledgement to TP1.
But when the message is fired from TP3, the acknowledgement is being sent back to TP1 instead of TP3 and the error appearing in TP1 is "Error -: AIP-50904: ReferTo message not found".
The configuration on TP2 for TP1 and TP3 are as follows:-
1) The DUNS IDs of TP1 and TP3 are the same.
2) The Delivery channel names in TP1 and TP3 are different.
3) The transport server names are the same, but their IP addresses are different.
4) The agreement names are different, but their Agreement IDs are the same.
Can you please treat this issue on priority and look into it ASAP?
Regards,
Vishal
+919881737231

Hi Prasanna,
Thanks a lot for your reply.
The solution given by you worked.
But now iam getting different error at the TP2.
The ACk shows the status as complete but the request PO show error and it takes 20-30 min to process the ack.
The error it shows is as follows:-
rror -: AIP-50903: Message "AC1F755611E2AA4AEA80000017749090-1" retry count is zero
     at oracle.tip.adapter.b2b.msgproc.MessageHandler.handleAppMessageRetry(MessageHandler.java:375)
     at oracle.tip.adapter.b2b.msgproc.MessageHandler.deliverMessageToDestination(MessageHandler.java:325)
     at oracle.tip.adapter.b2b.msgproc.Request.putMsg(Request.java:650)
     at oracle.tip.adapter.b2b.msgproc.Request.continueRequest(Request.java:474)
     at oracle.tip.adapter.b2b.msgproc.Request.incomingRequest(Request.java:403)
     at oracle.tip.adapter.b2b.engine.Engine.processIncomingMessage(Engine.java:2042)
     at oracle.tip.adapter.b2b.engine.Engine.incomingContinueProcess(Engine.java:2554)
     at oracle.tip.adapter.b2b.engine.Engine.handleMessageEvent(Engine.java:2424)
     at oracle.tip.adapter.b2b.engine.Engine.processEvents(Engine.java:2379)
     at oracle.tip.adapter.b2b.data.MsgListener.onMessage(MsgListener.java:527)
     at oracle.tip.adapter.b2b.data.MsgListener.run(MsgListener.java:374)
     at java.lang.Thread.run(Thread.java:534)
2008.12.12 at 15:31:23:938: Thread-16: B2B - (ERROR) Error -: AIP-50903: Message "AC1F755611E2AA4AEA80000017749090-1" retry count is zero
     at oracle.tip.adapter.b2b.msgproc.MessageHandler.handleAppMessageRetry(MessageHandler.java:375)
     at oracle.tip.adapter.b2b.msgproc.MessageHandler.deliverMessageToDestination(MessageHandler.java:325)
     at oracle.tip.adapter.b2b.msgproc.Request.putMsg(Request.java:650)
     at oracle.tip.adapter.b2b.msgproc.Request.continueRequest(Request.java:474)
     at oracle.tip.adapter.b2b.msgproc.Request.incomingRequest(Request.java:403)
     at oracle.tip.adapter.b2b.engine.Engine.processIncomingMessage(Engine.java:2042)
     at oracle.tip.adapter.b2b.engine.Engine.incomingContinueProcess(Engine.java:2554)
     at oracle.tip.adapter.b2b.engine.Engine.handleMessageEvent(Engine.java:2424)
     at oracle.tip.adapter.b2b.engine.Engine.processEvents(Engine.java:2379)
     at oracle.tip.adapter.b2b.data.MsgListener.onMessage(MsgListener.java:527)
     at oracle.tip.adapter.b2b.data.MsgListener.run(MsgListener.java:374)
     at java.lang.Thread.run(Thread.java:534)
2008.12.12 at 15:31:23:938: Thread-16: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:DbAccess:updateMsgError(3 params) Exit
2008.12.12 at 15:31:23:938: Thread-16: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:notifyApp retry value <= 0, so sending exception to IP_IN_QUEUE
2008.12.12 at 15:31:23:938: Thread-16: B2B - (DEBUG) Engine:notifyApp Enter
2008.12.12 at 15:31:23:938: Thread-16: B2B - (DEBUG) Enqueue Engine AQJMSCorrelationID = null
2008.12.12 at 15:31:23:938: Thread-16: B2B - (DEBUG) notifyApp:notifyApp Enqueue the ip exception message:
<Exception xmlns="http://integration.oracle.com/B2B/Exception" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<correlationId>null</correlationId>
<b2bMessageId>AC1F755611E2AA4AEA80000017749090-1</b2bMessageId>
<errorCode>AIP-50903</errorCode>
<errorText>Message "AC1F755611E2AA4AEA80000017749090-1" retry count is zero</errorText>
<errorDescription>
<![CDATA[Machine Info: (PUNIN1879164449)
Message "AC1F755611E2AA4AEA80000017749090-1" retry count is zero  ]]>
</errorDescription>
<errorSeverity>2</errorSeverity>
</Exception>
Can you please help me on this.
Regards,
Rakesh

Similar Messages

  • AIP-50143:  Transaction Instance Not found for Transaction Id

    Hey Guys,
    We have configured a Custom Document Exchange over Generic protocol to transfer a file.
    1. Internal delivery channel is 'SFTP' - Picks file
    2. External delivery channel is 'SFTP' - Puts file
    3. Exchange protocol - Custom document over generic
    4. Translation enabled - False (Currently its turned off, but the file is xml so we may want to turn it on)
    5. Validation enabled - False
    We are encountering below error in B2B while processing. Can someone please help with this.
    Thanks,
    Phani
    010.02.05 at 18:41:41:672: Thread-26: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:setDocumentPlugin PickReqRev 1.0
    2010.02.05 at 18:41:41:672: Thread-26: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:setDocumentPlugin info : Cremul version D96A
    2010.02.05 at 18:41:41:672: Thread-26: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:setDocumentPlugin info : EDIPHARM version 1.0
    2010.02.05 at 18:41:41:672: Thread-26: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:setDocumentPlugin info : PickReqRev version 1.0
    2010.02.05 at 18:41:41:673: Thread-26: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:setExchangePlugin Generic version 1.0
    2010.02.05 at 18:41:41:673: Thread-26: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:setExchangePlugin info : Genericversion 1.0
    2010.02.05 at 18:41:41:673: Thread-26: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processOutgoingMessage translated payload =
    oracle.tip.adapter.b2b.message.MessageStorage@140fee
    2010.02.05 at 18:41:41:673: Thread-26: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processOutgoingMessage msg.isSignalMsg() = false
    2010.02.05 at 18:41:41:673: Thread-26: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processOutgoingMessage Call Outgoing Response Processor
    2010.02.05 at 18:41:41:673: Thread-26: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.Response:Response:outgoingResponse Enter
    2010.02.05 at 18:41:41:673: Thread-26: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.Response:Response:outgoingResponse Update the Request-Response Table Row for RefertoRequestMessageID with message state Processing Outgoing Response
    2010.02.05 at 18:41:41:676: Thread-26: BusinessLogicLayer - (DEBUG) Authorization disabled. UserBootstrapped:false, useAuthorization:true, configType:null
    2010.02.05 at 18:41:41:677: Thread-26: BusinessLogicLayer - (DEBUG) Push Stack: queryBusinessTransactionInstance
    2010.02.05 at 18:41:41:693: Thread-26: BusinessLogicLayer - (DEBUG) Pop Stack: queryBusinessTransactionInstance
    2010.02.05 at 18:41:41:694: Thread-26: B2B - (ERROR) Error -: AIP-50143: Transaction Instance Not found for Transaction Id "null"
         at oracle.tip.adapter.b2b.collaboration.B2BWFEventManager.handleException(B2BWFEventManager.java:478)
         at oracle.tip.adapter.b2b.collaboration.CollabCatalogAccessor.getTransactionInstance(CollabCatalogAccessor.java:364)
         at oracle.tip.adapter.b2b.collaboration.CollabCatalogAccessor.setTransactionState(CollabCatalogAccessor.java:283)
         at oracle.tip.adapter.b2b.collaboration.CollaborationManager.setTransactionState(CollaborationManager.java:871)
         at oracle.tip.adapter.b2b.msgproc.DbAccess.updateReqRespState(DbAccess.java:3249)
         at oracle.tip.adapter.b2b.msgproc.Response.outgoingResponse(Response.java:905)
         at oracle.tip.adapter.b2b.engine.Engine.processOutgoingMessage(Engine.java:1170)
         at oracle.tip.adapter.b2b.transport.AppInterfaceListener.onMessage(AppInterfaceListener.java:141)
         at oracle.tip.transport.basic.sftp.SFTPProcessor.processMessage(SFTPProcessor.java:188)
         at oracle.tip.transport.basic.sftp.SFTPMonitor.processMessage(SFTPMonitor.java:351)
         at oracle.tip.transport.basic.sftp.SFTPMonitor.run(SFTPMonitor.java:304)
    2010.02.05 at 18:41:42:001: Thread-26: B2B - (DEBUG) Engine:notifyApp Enter
    2010.02.05 at 18:41:42:014: Thread-26: B2B - (DEBUG) notifyApp:notifyApp Enqueue the ip exception message:
    <Exception xmlns="http://integration.oracle.com/B2B/Exception" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
    <correlationId>null</correlationId>
    <b2bMessageId>0A140A0E126A1276F45000001AD6B570</b2bMessageId>
    <errorCode>AIP-50014</errorCode>
    <errorText>General Error</errorText>
    <errorDescription>
    <![CDATA[Machine Info: (fcgemappdev04)
    Description: General Error
    StackTrace:
    Error -:  AIP-50014:  General Error: Error -:  AIP-50025:  Repository error : Error -:  AIP-50025:  Repository error : Error -:  AIP-50143:  Transaction Instance Not found for Transaction Id "null"
         at oracle.tip.adapter.b2b.engine.Engine.processOutgoingMessage(Engine.java:1213)
         at oracle.tip.adapter.b2b.transport.AppInterfaceListener.onMessage(AppInterfaceListener.java:141)
         at oracle.tip.transport.basic.sftp.SFTPProcessor.processMessage(SFTPProcessor.java:188)
         at oracle.tip.transport.basic.sftp.SFTPMonitor.processMessage(SFTPMonitor.java:351)
         at oracle.tip.transport.basic.sftp.SFTPMonitor.run(SFTPMonitor.java:304)
    Caused by: Error -:  AIP-50025:  Repository error : Error -:  AIP-50025:  Repository error : Error -:  AIP-50143:  Transaction Instance Not found for Transaction Id "null"
         at oracle.tip.adapter.b2b.msgproc.DbAccess.updateReqRespState(DbAccess.java:3252)
         at oracle.tip.adapter.b2b.msgproc.Response.outgoingResponse(Response.java:905)
         at oracle.tip.adapter.b2b.engine.Engine.processOutgoingMessage(Engine.java:1170)
         ... 4 more
    Caused by: Error -:  AIP-50025:  Repository error : Error -:  AIP-50143:  Transaction Instance Not found for Transaction Id "null"
         at oracle.tip.adapter.b2b.collaboration.CollaborationManager.setTransactionState(CollaborationManager.java:874)
         at oracle.tip.adapter.b2b.msgproc.DbAccess.updateReqRespState(DbAccess.java:3249)
         ... 6 more
    Caused by: Error -:  AIP-50143:  Transaction Instance Not found for Transaction Id "null"
         at oracle.tip.adapter.b2b.collaboration.B2BWFEventManager.handleException(B2BWFEventManager.java:478)
         at oracle.tip.adapter.b2b.collaboration.CollabCatalogAccessor.getTransactionInstance(CollabCatalogAccessor.java:364)
         at oracle.tip.adapter.b2b.collaboration.CollabCatalogAccessor.setTransactionState(CollabCatalogAccessor.java:283)
         at oracle.tip.adapter.b2b.collaboration.CollaborationManager.setTransactionState(CollaborationManager.java:871)
         ... 7 more
      ]]>

    Hi Phani,
    What is the naming convention you are using at IDC? If you are sending the response to your TP, then make sure to send ReplyToMsgId as part of file name. If it is not a response, then send MessageType as 1 as part of file name.
    For file naming convention required, please refer -
    http://www.oracle.com/technology/products/integration/b2b/pdf/B2B_TN_010_Transport_File_FTP_Internal.pdf
    Regards,
    Anuj

  • Repository error:Error -: AIP-50143:Transaction Instance Not fo

    Hi Ramesh,
    The Scenario is as follows:
    1. we are running a stub on WLI server(back end) which enques a message in to the JMS queue.
    2.This JMS queue is used in the B2B internal delivery channel.
    3.The message is coming to the B2B , however we are getting an error with the following message.
    ******ERROR*******
    2008.10.31 at 16:29:35:289: Thread-27: B2B - (DEBUG) notifyApp:notifyApp Enqueue the ip exception message:
    <Exception xmlns="http://integration.oracle.com/B2B/Exception" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
    <correlationId>null</correlationId>
    <b2bMessageId>AC1F755B11D528EE26C000001BDC0BC0</b2bMessageId>
    <errorCode>AIP-50014</errorCode>
    <errorText>General Error</errorText>
    <errorDescription>
    <![CDATA[Machine Info: (PUNIN1879164419)
    Description: General Error
    StackTrace:
    Error -: AIP-50014: General Error: Error -: AIP-50025: Repository error : Error -: AIP-50025: Repository error : Error -: AIP-50143: Transaction Instance Not found for Transaction Id "null"
    at oracle.tip.adapter.b2b.engine.Engine.processOutgoingMessage(Engine.java:1178)
    at oracle.tip.adapter.b2b.transport.AppInterfaceListener.onMessage(AppInterfaceListener.java:134)
    at oracle.tip.transport.basic.jms.JMSMonitor.processMessages(JMSMonitor.java:609)
    at oracle.tip.transport.basic.jms.JMSMonitor.run(JMSMonitor.java:235)
    Caused by: Error -: AIP-50025: Repository error : Error -: AIP-50025: Repository error : Error -: AIP-50143: Transaction Instance Not found for Transaction Id "null"
    at oracle.tip.adapter.b2b.msgproc.DbAccess.updateReqRespState(DbAccess.java:3214)
    at oracle.tip.adapter.b2b.msgproc.Response.outgoingResponse(Response.java:904)
    at oracle.tip.adapter.b2b.engine.Engine.processOutgoingMessage(Engine.java:1135)
    ... 3 more
    Caused by: Error -: AIP-50025: Repository error : Error -: AIP-50143: Transaction Instance Not found for Transaction Id "null"
    at oracle.tip.adapter.b2b.collaboration.CollaborationManager.setTransactionState(CollaborationManager.java:874)
    at oracle.tip.adapter.b2b.msgproc.DbAccess.updateReqRespState(DbAccess.java:3211)
    ... 5 more
    Caused by: Error -: AIP-50143: Transaction Instance Not found for Transaction Id "null"
    at oracle.tip.adapter.b2b.collaboration.B2BWFEventManager.handleException(B2BWFEventManager.java:478)
    at oracle.tip.adapter.b2b.collaboration.CollabCatalogAccessor.getTransactionInstance(CollabCatalogAccessor.java:364)
    at oracle.tip.adapter.b2b.collaboration.CollabCatalogAccessor.setTransactionState(CollabCatalogAccessor.java:283)
    at oracle.tip.adapter.b2b.collaboration.CollaborationManager.setTransactionState(CollaborationManager.java:871)
    ... 6 more
    ]]>
    </errorDescription>
    <errorSeverity>2</errorSeverity>
    </Exception>
    2008.10.31 at 16:29:35:304: Thread-27: B2B - (DEBUG) Engine:notifyApp Exit
    2008.10.31 at 16:29:35:304: Thread-27: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:handleOutboundException Updated the Error Message Successfully: Error -: AIP-50014: General Error
    ******ERROR*******
    the screnario is working when we directly put the message on to the queue.
    Please help .
    Thanks & Regards
    Sachin (Infosys Team)

    Please refer Re: AIP-50025:  Repository error ?
    Regards,
    Sinkar
    [From Ramesh Team]

  • 'Error loading plugin: Plugin file not found' message on ONLY 5 sites, but all others OK.  Help, please!

    Hi Again!
    I posted this problem here before, but since I really need to access the sites that receive this error message in less than a month, I had to re-post; hopefully someone who didn't see it before will see it & have a solution for me.
    Here are the details:  I'm running windows 8.1 & I use Firefox 33.1.1, Pale Moon 25.1.0 or Opera 26.0 as my browsers, (I have IE installed & up-to-date, but I never use it).  I followed the 10-point checklist on Adobe & everything was done, except for "uncheck Hardware Acceleration" in Flash 'Settings'; I tried to uncheck it on this site, where it's indicated, as well as in my 4 browsers when I'm doing something that uses Flash, but no matter how hard I try, I can't 'uncheck' the check mark in that tiny box!  Since this error problem only affects 5 web sites, & I can watch streaming media on all other sites, I don't think it's an issue. 
    Here's how this problem began:  I was watching a live, streaming nest-cam on 5/09/14 around 11:00AM, (yes, I DO know the exact time & date, because it happened so suddenly while I was watching this website that I'd been watching since the end of February, 2014), when my screen went black.  I thought it was probably an Adobe Crash, but when the usual Crash Report window didn't show up, I just closed Firefox & reopened it, expecting to resume watching the nest-cam.  When I went back to the site, I got the black screen with the "Error loading plugin: Plugin file not found" message.  The chat portion on the site still works, though. I know there are other sites with this nest-cam feed, so I started trying them, but it took several tries for me to find one that didn't get the error message! I posted this problem on "Windows BBS" forum, & someone else posted that the same thing happened to them AND on the same sites!  They didn't have a solution, either.  I cleared my cache, rebooted my PC & even did a System Restore, but whatever happened in that brief second made using ONLY 5 sites impossible.  Here are the sites that receive the error message:
    http://pixcontroller.com/eagles, (but I CAN go to http://pixcontroller.com, but there isn't any streaming media)
    http://cbslocal.com/eagles
    http://westmorelandconservancy.org/BlueBirdwebcam-1.htm
    http://wildearth.tv/cam/pittsburgh-bald-eagles, (I get the error message on ALL cams on this site)
    http://aviary.org/BE-NestCam1 (I get the error message on ALL cams on this site)
    Now if any videos from the 5 websites above are uploaded to YouTube, I can watch them perfectly...no error message if I watch the videos elsewhere.  Luckily, I found Ustream, & they have most of the nest cams I watch, but I need to fix this issue, because it's nearing nesting time!  I'm an amateur nest-watcher & it's vital that I have access to these 5 sites, so if anyone knows how to fix this, PLEASE tell me!
    Thanks for taking the time to read my post.
    All suggestions/solutions are gratefully accepted.
    Thanks in advance for your help!
    DogPal 

    File Not Found Error in Welcome Screen
    07-Nov-2013 10:25
    Tags: #dreamweaver_cs6_update
    Help please!
    Live preview also not working.
    I have exactly the exact problem described below but do not have a folder with the same name as the volume created under the volume. Please can someone help - I've tried everything. This problem only happened when I upgraded to Dreaweaver CC!
    "On launching Dreamweaver on your Macintosh if your Welcome Screen is not loading and if you see a "File not found" error, please check if you have a folder with the same name as your volume created under the volume. For more info on this please go through the attached pdf document. Other dialogs/panels in dreamweaver that will be blank due to this issue are Jquery Swatches panel, Adobe Edge Webfonts tab in Manage Fonts dialog,W3c Error Info dialog, Externalise Javascript dialog and svn revert dialog. After following the changes mentioned in the attached document please check all the affected dialogs/panels to confirm everything is working as expected."
    Thanks,
    Martin Bond
    [personal information removed by moderator]

  • SXMB_MONI : Error in Persistence Layer : XML Message Not Found

    Hi Team,
    There are some messages in our Production system and is in Scheduled state in SXMB_MONI and when we try to re-process those messages, we are getting message : Error in Persistence Layer and when we double click on message, we are getting the error : XML Message Not Found.
    Any help on this is highly appreciated.
    Thanks & Regards,
    C V Jayachandra

    Hi,
    Please refer the below discussion
    SXMB_MONI - Error accessing persistence layer
    regards,
    Harish

  • Brrestore give error termination message not found

    Dear all
    i have try to restore offline backup to test system bcaz while database upgrade it got crashed it shows error ora-01157 and ora-01110 i have the backup of system
    while i am trying to restore the backup it throws error terminated message not found d:\oracle\SID\sapbackup\beojggvh.afd log file incomplete
    i used following command
    brrestore -b beojggvh.afd -m full -c
    i copied backSID.log and beojggvh.afd file from offline backup folder to target system /oracle/sid/sapbackup  suggest i went wrong
    i am on windows
    Regards

    Hi,
    Share the complete error log file and make sure data file using for restore should be a successful one complete offline backup.In addition share alert_<SID>.log file also.
    Regards,
    Gaurav

  • Error: [129]: transaction rolled back by an internal error:  [129] transaction rolled back by an internal error: exception 141000274: exception 141000274: TRexUtils/ParallelDispatcher.cpp:275 message not found; $message$=

    Hello Gurus,
    I have a couple of calculation views in HANA and each of them has text fields (like Employee Name, Country Name etc.).
    As part of my project requirement, I have join those two views and get all the fields that exist in them.
    When I am doing so, I am getting a weird error as shown below.
    Error: [129]: transaction rolled back by an internal error:  [129] transaction rolled back by an internal error: exception 141000274: exception 141000274:
    TRexUtils/ParallelDispatcher.cpp:275
    message not found; $message$='TSR HTKD JFSDFM'
    Please check lines: 59,
    Upon, researching further, I could see that the value 'TSR HTKD JFSDFM' is the value in text field of Employee Name.
    I did try to increase the length of the field and change the data types but nothing has worked.
    Could you please help me in getting this one resolved.
    Thanks,
    Raviteja

    Hi,
    I am exactly facing the same issue:
    Error: [129]: transaction rolled back by an internal error:  [129] transaction rolled back by an internal error: exception 141000274:
    But i found a fix :-) .....
    This may be a very late reply but it would help people who desperately searching for an answer for this issue.
    I used CAST function .. The problem is, we are selecting data from table and of course we dont know the size of the data (attribute) @ runtime. We assign the length by looking at the table attr length or view op attr length. But what happens is the junk data which exceeds the limit of the allocated space hence we get this error.
    So i used CAST function to truncate the excess junk values (may be spaces).
    Example:
    I have a ATTR view of date in the format YYYY-MM-DD which means 10 char size.
    In my CALC view I have created date OP column of VARCHAR(10) but I get the above error for no reason. Eventhoug i am 100% sure about my ATTR date would be max of 10 char my CALC view is failing @ runtime.
    So i did a CAST on date as CAST(my_date as varchar(10)) and the magic happend. It works .......
    But you need to be careful in using this because if you use CAST you may lose data. Careful. In my case i dont.
    Somebody from HANA team should look at this issue from SAP and solve this. I am sure it is a serious bug from HANA (eventhough i am using SAP HANA SP09 Rev 92 the most latest as of today !!!!!!!!!! )
    Enjoy....
    Thanks & Regards
    Prakash K

  • Error 906 message not found on compiling form in forms builder

    When compiling a form in forms builder 6i I get the message: error 906: message not found. No message file for product=plsql80 facility=PCM
    What should I do?

    Is your PLSQL80 environment variable set? - Should point to the PLSQL80 directory as well.
    If this is the only missing error that you have I wouldn't worry about it. 906 just means that PL/SQL could not compile the program unit.

  • Crs_stat errors out with "message not found"

    hi gurus
    After patching patch 8705958, crs_stat errors out with "message not found" ,what could be the problem?
    Thank you!

    Never faced such issue...
    please search on metalink or raise an SR with Oracle Support..
    Cheers !
    Rajesh

  • I am trying to install adobe livecycle designer es4 trial version on my computer and i keep getting the message Error 13.11 Source file not found: c:\  verify that the file exist. I have tried to install on both windows 7 and windows 8 and i still get the

    error 13.11 Source file not found verify that the file exsist

    Try a more recent version of my advice. The "for older video cards version" may work when the default version doesn't.
    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
    The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
    Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
    tt2

  • BPM error : Message pipeline PE_ADAPTER unknown XML message not found. Help

    Hello All,
    I have done 3 steps in BPM
    RFC --- BPM --- RFC
    RECEIVE step ==> Opens SYNCH ASYNCH bridge and receives RFC request message
    SEND synchronous ==> to send RFC request and get the RFC response.
    SEND ==> Closes SYNCH ASYNCH bridge and Send's response back to the RFC.
    In my last send step (response back) I am getting message
    "Message pipeline PE_ADAPTER unknown XML message not found" .
    Pls help

    Hi Rick,
    check out this SAP Note: 1087532
    Regards
    Dominic

  • Getting error in XI"RFC Program Not Found"

    Hi All,
    I am getting error in SXMB_MONI "RFC Program not found via SAP XI".
    So please suggest me what is the problem behind this..For these SAP XI and R/3 i made 3 to 4 RFC program but only 1 RFC program name not getting Via SAP XI.
    Thanks
    Amit

    Hi,
    I am calling RFC FM via SAP XI.
    Main Records are coming from siebel and recevied by SAP XI and XI will do some changes in records and calling REC FM from SAP R/3.
    Problem is siebel to xi records coming fine but xi to sap R/3 error message coming "Program not Found".
    Thanks
    Amit

  • Please help me with this error: "Apple application support was not found... Error 2"

    Can anyone please help me with this error: "Apple application support was not found... Error 2"
    I've followed the instructions by removing all Apple files from my laptop, but when I reinstall the iTunes software it still comes up with this message:
    "Apple application support is required to run iTunesHelper. Please uninstall iTunes, then install iTunes again. Error 2"
    Thank you

    iTunes "Apple Application Support is required... Error 2" and possible fix.
    I know this is a bit late but I came accross this thread trying to resolve this same problem and came up with a solution that worked for me, so thought I would share it here too. I hope it helps someone else.
    I just resolved this on Win Vista (should apply equally for Win7 too). Please uninstall iTunes before proceeding though. I'll walk you through the process I followed, if you like you can jump straight to the Solution section.
    Problems:
    The initial error during the installation of iTunes was:
    An error occurred during the installation of assembly 'Microsoft.VC80.CRT,version="8.0.50727.4053",type="win32",publicKeyToken='1fc8b 3b9a1e18e3b",processorarchitecture="x86". Please refer to Help and Support for more information. HRESULT:0x8007054F
    The error (after installing iTunes) when trying to run iTunes was:
    Apple Application Support is required to run iTunes. Please uninstall iTunes, then install iTunes again. Error 2 (Windows error 2).
    After trying various fixes around the forums I came across this MSKB article, which relates to the first installation error:
    http://support.microsoft.com/kb/2688946
    This lead me to trying to install MS Visual C++ but I received the following error trying to install that:
    Error 1935.An error occurred during the installation of assembly ‘Microsoft.VC80.ATL,type=”win32”,version=”8.0.50727.762”,publicKeyToken=”1fc8b3 b9a1e18e3b”,processorArchitecture=”amd64”’. Please refer to Help and Support for more information. HRESULT: 0x80070BC9. Assembly interface: IassemblyCacheItem, function: Commit, component: {837BF1EB-D770-94EB-A01F-C8B3B9A1E18E}
    Note: The installation of VC++ rolls back when it fails.
    Solution:
    Through this error I found this MSKB article:
    http://support.microsoft.com/kb/946414
    The Automated MS "Fix It" msi package didn’t work.
    Note: Please backup your registry first (see the above MSKB article for instructions).
    I opened the registry and (as instructed in the MSKB article) deleted the following keys:
    HKEY_LOCAL_MACHINE\COMPONENTS\
    PendingXmlIdentifier
    NextQueueEntryIndex
    AdvancedInstallersNeedResolving
    Reboot and reinstall iTunes.
    If it helps you please like this so others can find it.

  • Getting idoc error - Entry in outbound table not found- in outbound scenari

    hi,
    while generating idoc for outbound idoc to file scenario - i am getting error
    "Entry in outbound table not found" (29 - error in ALE service)
    Diagnosis
    No partner profile (outbound parameter) could be found using the following key:
    /C100/KU//WP_EAN////
    This refers to the key fields in table EDP13:
    RCVPRN  Partner number
    RCVPRT  Partner type
    RCVPFC  Partner function
    MESTYP  Logical message
    MESTYP  Message code
    but already entry has been maintained in partner profiles for the corresponding message.
    same setup is working for other message types. pls let me know what might be the problem

    Hi,
    Check whether partner name is correct or not in WE20/outbound parameters undoer Logical System.
    Regards,
    Sreenivas.

  • "Error in function: Add Table not found [131-183]" - TDS Addon Version 3.16

    While loading TDS Addon Version: 3.16 I am getting the undermentioned error:
    "Error in function: Add Table not found [131-183]"
    SAP B1, 2005B, PL 39.
    It also shows the message that it is successfully installed. When I try to access any of the screen the above messge pops up.
    This is very urgent kindly help me out.
    Edited by: Philip Eller on May 16, 2008 8:50 AM
    Edited by: Philip Eller on May 30, 2008 8:41 AM*

    Dear,
    The addon is a third party addon which was developed by CitiXSys. so the support is provided by the partner who developed the addon.
    Go to the vendor Citixys for further support will give you a quick reply.
    Regards
    Apple

Maybe you are looking for