ERROR AL EJECUTAR EL SISTEM STATUS REPORT SSR

Jovenes Buena tarde, tengo el sguiente incoveniente, estoy ejecutando desde el rsp el SSR pero llega al punto de documentos y me da un error, adjunto imagen, a alguien le ha pasado esta situacion? Espero sus valiosos comentarios. gracias, La version de SAP ES 8.81 PL 08 y el RSP 2.4 pl10

Estimada Viviana,
Lo reportado es un error conocido y documentado en la nota 918188.
En la misma podrán observar que el error se genera debido a conflictos causados por la instalación de la versión de .Net 2.0
Adicionalmente el error es generado cuando el usuario no es administrador del grupo de trabajo.
Les invitamos a revisar la nota pertinente y aplicar los correctivos pertinentes.
Queda a sus gratas ordenes,
Juan Manuel Marrero
SAP Business One Forums Team

Similar Messages

Status Report Preview Error in cProjects

Hi Experts,
I have created one Project Type in cProjects, with reference to Project Type i have created Project with all the elements. Next step is i want to see the Status Report of my Project. When i press Preview button i am getting the following error message:
"Error occurred when generating the print preview (function module: /1BCDWB/SM00000010)
ADS: SOAP Runtime Exception: CSoapExceptionTransport :(100101) "
Kindly help me in resolving the above issue. Thanks in Advance.
regards,
Sridhar.
Edited by: SridarReddy on Dec 1, 2009 9:33 AM

Hi Daniel,
I have the same problem.
When i press Preview button i am getting the following error message:
"Error occurred when generating the print preview (function module: /1BCDWB/SM00000010)"
Could you please tell me what configuration changes you have done on ADS server?
Regards
Ramesh

Error al ejecutar Crystal Report

Hola a todos!!
Estoy haciendo un reporte en Crystal para una BD que cuenta con Factura Electrónica con un addon (En una máquina que no tiene el addon instalado, la idea es sustituir la FE del addon, por el de SAP)
Sin embargo al momento de querer abrirlo en SAP me aparece el siguiente error: "Error al ejecutar Crystal Report" (Así, tal cual; según yo Crystal es Crystal ReportS...).
Si yo monto este reporte en una BD que no tiene el addon, el reporte sí se abre, normal.
Alguien sabe qué me puede estar deteniendo el abrirlo en SAP?
Gracias,
PJ

Hola
Supongo que para la fecha en que publicaste esto ya encontraste la solución jeje. Pero igual para los que entren a este post, hace poco hice el UpGrade a la version de SBO 9 este ya con la version de crystal report 14.0 o la 2011, y pues me dio el mismo error.
La solución: Instala el cliente SAP y el DI API de 32 bits, lo que sucede es que Crystal Report 2011 no corre con el cliente SAP ni DI API de 64 bits.
Espero les sirva. bye.

Error while generating the Document... Bursting Status Report

Hey all,
I am getting some errors in a production environment when trying to burst out some invoice data.
This process has been pretty robust and out of 1000+ invoices a day, I can only find 4 that are failing regularily.
Why am I mentioning?, just to show that I am thinking this is a data issue, but just cannot see anything that stands out.
I can take the xml output and run it through my development suite on my local machine and all runs fine.
Just when it is running live through the db is when it fails.
Here is the Bursting output that shows the error....
<?xml version="1.0" encoding="UTF-8"?>
<BURS_REPORT>
<REQUESTID>27044820</REQUESTID>
<PARENT_REQUESTID>27044726</PARENT_REQUESTID>
<REPORT_DESC>Invoice Print Selected Invoices</REPORT_DESC>
<OUTPUT_FILE>[$OUT_DIR]/o27044820.zip</OUTPUT_FILE>
<DOCUMENT_STATUS>
<KEY></KEY>
<OUTPUT_TYPE>pdf</OUTPUT_TYPE>
<DELIVERY></DELIVERY>
<OUTPUT></OUTPUT>
<STATUS>fail</STATUS>
<LOG>Error while generating the Document...</LOG>
</DOCUMENT_STATUS>
</BURS_REPORT>
The problem is that this output doesn't necessarily help, nor can I find any hints in the OPP logs.
So... the question becomes...
Any ideas on where I can look to resolve this issue?+
Or where I can find any clues at, that would possible point at the issue?+
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bi
BI Publisher 5.6.3
Thanks
Hayden,

Tim,
Thanks for the suggestion, always seems to slip my mind that the Bursting Report has debug on it.
As far as what is generating the XML, it is oracle's standard, only slightly modified ... ;), invoice generating report, RAXINV_SEL.
Well RAXINV_SEL, or RAXINV_NEW, doesn't matter, same code, that is the executable.
I have turned on the debug, for both the source xml and the burst request, and unfortunately, still nothing stands out to me.
I was really expecting to see something in the burst log, pasted at the bottom...
but, it yet avoids me.
If I had to guess, I would bet the user went, in our terminology, "slashwit crazy", or example "model /w options", in some description.
But can't seem to find which field it is blowing up on, since we are catching these special characters in several places already, and slashwit is littered throughout the output.
I was also looking in the bursting control file for the special xml tags identified there, as those would require no slashes. But those are all clean.
Hayden,
XML Publisher: Version : 11.5.0
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
XDOBURSTREP module: XML Publisher Report Bursting Program
Current system time is 21-SEP-2009 10:43:12
XML/BI Publisher Version : 5.6.3
Request ID: 27048106
All Parameters: ReportRequestID=27044726:DebugFlag=Y
Report Req ID: 27044726
Debug Flag: Y
Updating request description
Updated description
Retrieving XML request information
Node Name:{node}
Preparing parameters
null output =/u007/app/applmgr/{instance}/out/{instance}/o27048106.out
inputfilename =/u007/app/applmgr/{instance}/out/{instance}/o27044726.out
Data XML File:/u007/app/applmgr/{instance}/out/{instance}/o27044726.out
Set Bursting parameters..
Temp. Directory:/u007/app/applmgr/{instance}/temp
[092109_104315337][][STATEMENT] Oracle XML Parser version ::: Oracle XDK Java 9.0.4.0.0 Production
[092109_104315340][][STATEMENT] setOAProperties called..
Bursting propertes.....
{burstng-source=EBS, font.Free 3 of 9.normal.normal=truetype./usr/java/jre/lib/fonts/FREE3OF9.TTF, font.Times New Roman.normal.normal=truetype./usr/java/jre/lib/fonts/TIMES.TTF, system-temp-dir=/u007/app/applmgr/{instance}/temp, font.Arial.italic.normal=truetype./usr/java/jre/lib/fonts/ARIALI.TTF, user-variable:cp:parent_request_id=27044726, user-variable:cp:application_short_name=XDO, font.Courier New.normal.bold=truetype./usr/java/jre/lib/fonts/COURBD.TTF, font.Times New Roman.normal.bold=truetype./usr/java/jre/lib/fonts/TIMESBD.TTF, user-variable:cp:request_id=27048106, font.Arial.normal.normal=truetype./usr/java/jre/lib/fonts/ARIAL.TTF, font.Courier New.normal.normal=truetype./usr/java/jre/lib/fonts/COUR.TTF, user-variable.OA_MEDIA=http://diierp.corio.com:8002/OA_MEDIA, font.Courier New.italic.bold=truetype./usr/java/jre/lib/fonts/COURBI.TTF, user-variable:cp:org_id=83, user-variable:cp:DebugFlag=Y, font.Times New Roman.italic.bold=truetype./usr/java/jre/lib/fonts/TIMESBI.TTF, user-variable:cp:responsibility=51270, font.Arial.italic.bold=truetype./usr/java/jre/lib/fonts/ARIALBI.TTF, font.Courier New.italic.normal=truetype./usr/java/jre/lib/fonts/COURI.TTF, user-variable:cp:user=HAYDEN, user-variable:cp:reportdescription=Invoice Print Selected Invoices, user-variable:cp:language=en, font.Times New Roman.italic.normal=truetype./usr/java/jre/lib/fonts/TIMESI.TTF, user-variable:cp:ReportRequestID=27044726, user-variable:cp:locale=en-US, user-variable:cp:territory=US, font.Arial.normal.bold=truetype./usr/java/jre/lib/fonts/ARIALBD.TTF}
Start bursting process..
Bursting process complete..
Generating Bursting Status Report..
Start of log messages from FND_FILE
End of log messages from FND_FILE
Executing request completion options...
------------- 1) PUBLISH -------------
Beginning post-processing of request 27048106 on node {node} at 21-SEP-2009 10:43:19.
Post-processing of request 27048106 completed at 21-SEP-2009 10:43:20.
Finished executing request completion options.
Concurrent request completed
Current system time is 21-SEP-2009 10:43:20
---------------------------------------------------------------------------

"An unknown error" has occurred in status report in project server 2013

"An unknown error" has occurred in status report in project server 2013

Hi,
It would help if you could provide the ULS logs for this error, even the PWA queue error message. Then has it already been working before?
Hope this helps,
Guillaume Rouyre, MBA, MVP, P-Seller |

Project Status Report - cProjects 4.0 - Run time error

Under Basic Settings, I go to 'Forms for Printing and for Project Status Reports'. Here, under 'Create PDF-Based Forms', I select the form 'DPR_STATUS_REPORT_AIF' and Activate it. I then get to 'Activate Forms per project type'.I get to 'New Entries' and add 'DPR_STATUS_REPORT_AIF' and also set the 'Active' and 'Status Rpt' checked.
When I get to cProjects front end, I see the 'Project Status Report' template under the 'Status Report' tab. However, when I click on the 'Preview' button, I get to see a dump.
"The following error text was processed in the system SRP : WebDynpro Exception: SOAP Framework error: SOAP Runtime Exception: CSoapExceptionTransport : HTTP send returned with status code(100.101)"
Can someone please suggest how to get something useful at the click of the preview button?
Thanks.

Hi,
Yes your basis team should tell you more about this. ADS Credential needs to be installed on the java stack of your cProjects Server. For this you will have to send a message to SAP requesting for the ADS Credential. You will then receive a credential file with its password.
However not all servers support ADS. There is a list of server names that support ADS. You can get the server name on which cProjects is installed from your basis team and I shall let you know if it is supported or not. You can also have a look at in the PAM (Product availability Matrix) for SAP NetWeaver 2004s - Additional Components at http://service.sap.com/pam
Regards,
Reema.
Pl award all useful answers.

Error Logging in B2B Business Message Status Reports and Error Reports.

Hi,
Could someone please let us know as to how the error messages are being shown up in the b2b frontend in the Business Message Details Report and Error Reports.
In some of the cases the error message logging is not happening properly and even against the valid transaction block the entire iAudit Report or the B2B Analyzer report is getting posted .
In some cases the error message is logged as AIP-51505: General Validation Error (for the transaction block which is valid and having no errors)
Is there any way from the b2b backend these error messages and business messages could be traced or is there any other way wherein the proper and relevant error messages could be tracked from B2B.
Thanks
Sachin.

Hello,
Business message status reports identify business message instance details.These details include the sending and receiving trading partners, exchange protocol,document protocol, business action and its state, message date, and message details.
Error status reports identify error message details. These details include the error code, error text, business message identification, message date, and message details.
Please fix up a telecon to 918041086150 for further discussion on the same.
Rgds,Ramesh

/TDAG/CPM_REPORT007 error in Compliance Status Report

Hello SAP Guru's,
I receive the following error message when I start the Compliance Status Report (/TDAG/CPR03) on a material:
Unit of measure M with dimension LENGTH is invalid for specification 000000001157.
Message no./TDAG/CPM_REPORT007
I guess something is missing in the customizing. But do you have an idea what is missing? and where can I define it?
Thanks in advance for your help.
Rudy

Hello Rudy
I'm not familiar with the report but based on the error message I would check the following:
Go to transaction CUNI.
Select dimension LENGTH - on the lower right part of the screen
Check if the unit M (Meter) is defined for dimension LENGHT.
If not, ask the responsible person to enter it.
Hope this helps
Mark

Passing values to subreport in SSRS throwing an error - Data Retrieval failed for the report, please check the log for more details.

Hi,
I have the subreport calling from the main report. The subreport is based on MDX query agianst the SSAS cube. some dimensions in cube has values 0 and 1.
when I try to pass '0' to the sub report as the parameter value, it gives an error "Data Retrieval failed for the report, please check the log for more details".
Actually I am using table for storing these parameter values. In the main report I am calling this table (dataset) and passing these values to subreport.
so I have given like [0],[1] and this works fine. when I give only either [0] or [1] then it is throwing an error.
Could you please advise on this.
Appreciate all and any help.
Thanks,
Divya

Hi Divya,
Based on the current description, I understand that there is no issue if you pass two values from main report to subreport, while the issue occurs when passing one value to subreport.
To narrow down the issue, I want to confirm whether the subreport can run if there is only [0] or [1] in the subreport. If so, it indicates the query statements exist error in the subreport. If it’s not the case, this shows the issue occurs during passing
values from main report to subreport. To make further analysis, please post the details of query statements of the subreport to the forum.
Regards,
Heidi Duan
Heidi Duan
TechNet Community Support

SSRS Subscription error "An error occurred during rendering of the report"

I have created a subscription that will place a report on a file share. When the subscription runs to build an excel file and put it on the shared drive, it gives the following error: An error occurred during rendering of the report.
Problem is that some time subscription run successfully and sum time it give error: An error occurred during rendering of the report.
Help me
Mehmood G

When i subscribe report with xls format it complete successfully but when i subscribe report with xlsx then above error occur. i am not understanding problem help me..
i am using sql server 2008 R2
An error occurred during rendering of the report. --->
Microsoft.ReportingServices.ReportProcessing.UnhandledReportRenderingException:
An error occurred during rendering of the report. --->
Microsoft.ReportingServices.OnDemandReportRendering.ReportRenderingException: An
error occurred during rendering of the report. --->
System.IO.IsolatedStorage.IsolatedStorageException: Unable to determine the
identity of domain.
Mehmood

Status report template activation and assignment

Hi,
when I try to create Status report after selecting the Document folder and clicking the New Status report in Status Report tab of cproject, an error message is appearing as
'No templates for status reports have been entered for the project type' .
Where can assign the templates for staus reports?(SPRO or somewhere)
Also We have configured ADS already and able to generate Approval Documents. Can anyone guide this problem?
Regards,
Ramesh
muthurameshsap at gmail com

Hi Bharathi,
First check whether ADS is installed on Java stack. For this goto SA38 transaction and give report name FP_TEST_00 and execute it. Leave the fileds as it is and execute it. A dailog box will pop up asking printer name. Give it as PDF1 and check preview.
If it is working fine, check if any forms are active for the project type you have taken.
For example, if you took upgrade project, goto spro > cprojects > basic settings > forms for printing and for status reports > Execute activate forms per project type.
Select Your project type and double click on PDF print form. If you are not able to see any entries, goto new entries and select DPR_STATUS_REPORT_AIF and check the boxes Active and Status Report.
Revert if any issue.
Regards,
Syam
Edited by: syam sundar on Oct 28, 2008 4:55 AM

Getting multiple error while refreshing or scheduling WebI report

Hi BO Admin Experts ,
Feacing multiple errors while refreshing or scheduling webi reports in BI4.0 CMC ,
Please find the below errors :
1)report schedule status failed
2)Parameters : xxxcorp-franklinee; ATOu supply unv
Error Message : An internal error occured while calling 'ProcessDPcmndsEx' API (Error:ERR_WIS_30270)
3 ) Format : WebI
Parameters : 10000000000159270
Error Message :CORBA error while communicating with the SL service
Could you please help me on the abive 3 issues for the WebI schedule reports
Cheers ,
Pradeep Gorpadu

Hi,
While refreshing the WEBI Reports would recommend you check the WEBI PROCESSING Server's last changed date from CMC--> Servers.
Check when you are refreshing the reports, do you see the time stamp changed of WEBI PROCESSING servers?
Do you keep getting this error messages for all WEBI reports? Can you re-produce this with simple e-fashion reports as well?
After that go to the node where WEBI PROCESSING servers installed and check on the event viewer details if you see any relevant error messages.
Regards,
Upendra

Error DA0005 when trying to access report

Hi everyone,
We are getting the following error when trying to access a report:
Connection or SQL syntax error (DA0005)
Exception CS, Bad Value for field: Log on failed because the required parts are not correctly initialized. Contact system administrator.
I have tried to translate the error message from dutch.
Does anyone know how to solve this?

Hi,
Could you please try the following test:
This error message appears because the Connection Server is down or disabled. To start or enable the server perform the following steps:
1. Go to Start > Programs > BusinessObjects XI > BusinessObjects Enterprise > Central Configuration Manager.
2. Verify the Connection Server is started with a status of running.
3. Highlight the Connection Server and click the 'Start' button if the server is stopped.
4. Click the 'Enable/Disable Servers' button, log on, and verify there is a green up arrow next to the Connection Server.
5. Click the check box for the Connection Server and 'OK' if there is no green up arrow to enable the server.
Regards,
Deepti Bajpai

Javamail delivery status report HELP

This is the mail delivery status report that is given back to me....
how do i determine which is valid and which is not valid
// Actual detail of the mail, eg, from, to, send date etc
public void dumpEnvelope(Message m, PrintWriter out, InMailBean inMailBean) throws Exception {
Util util = new Util();
System.err.println("In dumpEnvelope");
out.println("" + "This is the message envelope"+ "");
out.println("" + "--------------------------"+ "");
Address[] a;
// FROM
if ((a = m.getFrom()) != null) {
for (int j = 0; j < a.length; j++){
out.println("" + "FROM: " + a[j].toString()+ "");
inMailBean.setSender(a[j].toString().trim());
// TO
if ((a = m.getRecipients(Message.RecipientType.TO)) != null) {
for (int j = 0; j < a.length; j++) {
out.println("" + "TO: " + a[j].toString()+ "");
//inMailBean.setReceipient(a[j].toString());
 /* InternetAddress ia = (InternetAddress)a[j];
 if (ia.isGroup()) {
 InternetAddress[] aa = ia.getGroup(false);
 for (int k = 0; k < aa.length; k++)
 System.err.println(" GROUP: " + aa[k].toString());
FROM: [email protected] (sender)
TO: [email protected] //<<<-----this is (valid)
TO: [email protected] //<<<<----this is (invalid)
if i open my outlook express...it will shows
Reporting-MTA: DNS; emg-mrk04.localdns.com
Arrival-Date: Fri, 6 Apr 2007 15:10:44 +0800
Original-Recipient: RFC822; <[email protected]>
Final-Recipient: RFC822; <[email protected]>
Action: failed
Remote-MTA: DNS; mx2.hotmail.com
Last-Attempt-Date: Fri, 6 Apr 2007 15:10:43 +0800
Message number: 0
This is the message envelope
FROM: Mail Delivery Subsystem
TO: [email protected]
SUBJECT: Returned mail: response error
SendDate: Fri Apr 06 14:52:49 SGT 2007
FLAGS:
X-Mailer NOT available
CONTENT-TYPE: multipart/report; report-type=delivery-status; boundary="[email protected]"
This is a Multipart
CONTENT-TYPE: text/plain
This is plain text
The original message was received at Fri, 6 Apr 2007 14:52:49 +0800 -
The following addresses had permanent fatal errors -
Transcript of session follows -
... while talking to mx3.hotmail.com >>> RCPT To: <<< 550 Requested action not taken: mailbox unavailable
This is a string
The original message was received at Fri, 6 Apr 2007 14:52:49 +0800 -
The following addresses had permanent fatal errors -
Transcript of session follows -
... while talking to mx3.hotmail.com >>> RCPT To: <<< 550 Requested action not taken: mailbox unavailable
CONTENT-TYPE: message/delivery-status
This is a Multipart Report -
CONTENT-TYPE: message/rfc822
This is a Nested Message
This is the message envelope
FROM: [email protected]
TO: [email protected]
TO: [email protected]
SUBJECT: sending mail exception 2
SendDate: Fri Apr 06 14:52:11 SGT 2007
FLAGS:
X-Mailer NOT available
CONTENT-TYPE: text/plain
This is plain text
sending mail exception 2
This is a string
sending mail exception 2
Message was edited by:
 yzme yzme
Message was edited by:
 yzme yzme

For this, you need to answer the following:-
a) where the customer required date is being captured in sale order ? Is it Requested Delivery Date ??
b) If it is RDD, will there be any manual change in that ?? If so, how will you track the changes
I feel, for the above questions, you have to develop a zee table where you need to capture the original delivery date and the change date so that you can compare this with the actual despatch date.
There is no standard report to make use of the requirement what you had narrated.
G. Lakshmipathi

Actuate Report Error in Siebel After Click on Report Name

Hi,
I am getting this error when i click on the report name. it is not showing the report.
Error Message
=============
Unable to load message 0xffff(SBL-GEN-00000)
=============
Can please anyone help for this error.
Thanks,
Asif

Hi,
first you the correct settings in transaction RSDIPROP for your InfoCube:
On tab 'Roll Up' you should set the flag Set Quality Status to OK Automatically.
Second delete the cache for the planbuffer query; the name of the plan buffer queries are as follows
- if your aggregation level is defined on InfoCube CUBE the name is CUBE/!!1CUBE
- if your aggregation level is defined on MultiProvider IPROV the name is IPROV/!!1IPROV
- if you are using a query on a MultiProvider containing aggregatiion levels delete also the cache of the query.
Now check the values of your query again.
Note 1136163 contains the recommended cache settings in RSRT.
Regards,
Gregor

ERROR AL EJECUTAR EL SISTEM STATUS REPORT SSR

Similar Messages

Maybe you are looking for