Error al iniciar "USING OPERATING SYSTEM"

Hola,
Tengo un ThinkCentre Edge 72 el cual al iniciar el equipo aparece el mensaje "using operating system" y de ahí no pasa.
He intentado entrar en la BIOS para restablecer los valores por defecto pero no entra en BIOS directamente aparece de nuevo ese mensaje.
Alguien tiene idea de que puede ser?.
Saludos y gracias,

Hola RichiRS. Por lo que comentas puede ser un problema de la información contenida en el disco (particiones, sistemas de archivos, etc) y por eso el sistema operativo no arranca.
Mi recomendación es que saques el disco y lo conectes a otro equipo (directo por cable SATA o bien utilizando un dock) para que puedas ver si tienes acceso a la información.
Saludos.
IPnaSh
First Spanish Community Guru - Colaborador ad honorem

Similar Messages

Could not open error log file ''. Operating system error = 5(failed to retrieve text for this error. Reason: 15105).

Hello
When I try to start the SQl server service i get the following error:
Event id 17058
Could not open error log file ''. Operating system error = 5(failed to retrieve text for this error. Reason: 15105).
As a test I have made sure the errorlog file ,and the entire drive it is, has everyone full control permissions, but to no avail. Does anyone have any ideas to resolve this issue?
Thank you

Hi,
Try running:
SELECT SERVERPROPERTY('ErrorLogFileName')
Then verify that the account being used to run the SQL Server service account has access to the path output above. If possible, you could try logging onto the server with the same account used to run SQL Server then navigate to the errorlog folder.
Thanks,
Andrew Bainbridge
SQL Server DBA
Please click "Propose As Answer" if a post solves your problem, or "Vote As Helpful" if a post has been useful to you

ERROR CODE 1962 - NO OPERATING SYSTEM FOUND

My B540 continues to experience intermittent problems with Error Code 1962-No Operating System Found. Sometimes the computer will run correctly for 3 or 4 days, other times for just an hour, but in the end it repeatedly locks up and will not reboot. If I check the Bios Setup immediately after this happens, it says that there is no HDD. However, if I wait for an hour or two with the computer off, it will boot.
1. The logical explanation is that the HDD is faulty, but that is not so in this case. In addition to the HDD that came with the computer, I have tried two other HDDs, both brand new, never used, and both with fresh Win 7 installs. Both of those ended up with the same Error Code 1962. There is no way that all three HDDs could be defective.
2. I removed and reseated the memory.
3. I ran extensive diagnostic tests on the memory; it tests OK.
4. Someone suggested plugging the HDD SATA cable into a different SATA connection, but the B540 only has two connections (one for the HDD, one for the optical drive). I swapped those two, but still got the error code.
I have to believe that the problem is with the motherboard. I have noticed on the forum that other people are experiencing the same 1962 error code; has anyone found a working solution?
Thanks!

Ah, bummer. Thought maybe I was onto something...
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

How to use Operating System Commands while using define in sqlplus

How to use Operating System Commands while using define in sqlplus . The Host OS is Linux
define report_name=PROD_${host date "+%b"}.html
The above is not working.
The output should be
define report_name=PROD_JAN.html
Regards,
DB

of course I was talking nonsense: the problem here is the mixing of bind variables and DEFINE variables.
With the following changes the script should work (the conditions for begin_interval_time are perhaps not what you want):
variable snap1 number
variable snap2 number
variable rptname varchar2(20)
begin
SELECT min(snap_id) into :snap1 FROM dba_hist_snapshot WHERE CAST(begin_interval_time AS DATE) >= SYSDATE-1;
SELECT max(snap_id) into :snap2 FROM dba_hist_snapshot WHERE CAST(begin_interval_time AS DATE) >= SYSDATE-1;
end;
col file_name_value new_value report_name noprint
select 'PROD_'|| to_char(sysdate,'MON') || '_' || to_char(sysdate,'DD') file_name_value from dual;
define report_type = 'html'
define num_days=2
define begin_snap=:snap1
define end_snap=:snap2
@@?/rdbms/admin/awrrpt.sql

ERROR: OUI-10180:Invalid Operating System group name specified. em12c instl

Hi All,
I am doing a silent install of EM12C, I have downloaded the 2 zip files from e-delivery.
The installation is done as ora3010 user whose group id is ems3010. On the same machine I have installed 11.2.0.2 with the same ora user ora3010 and group ems3010 for EM repos.
Now when I try to do the silent install of EM12C with the command
<EM_DUMP>/runInstaller -silent -responseFile $CONFIG_HOME/software_only.rsp -invPtrLoc $HOME/Middleware/oraInst.loc -waitForCompletion
with the contents of "software_only.rsp" file like below
RESPONSEFILE_VERSION=2.2.1.0.0
UNIX_GROUP_NAME=ems3010
SECURITY_UPDATES_VIA_MYORACLESUPPORT=false
DECLINE_SECURITY_UPDATES=true
INSTALL_UPDATES_SELECTION="skip"
ORACLE_MIDDLEWARE_HOME_LOCATION=/slot/ems3010/oracle/Middleware
FROM_LOCATION="../oms/Disk1/stage/products.xml"
DEINSTALL_LIST={"oracle.sysman.top.oms","12.1.0.1.0"}
b_upgrade=false
EM_INSTALL_TYPE="NOSEED"
CONFIGURATION_TYPE="LATER"
TOPLEVEL_COMPONENT={"oracle.sysman.top.oms","12.1.0.1.0"}
I get this error
ERROR: OUI-10180:Invalid Operating System group name specified.
As you can see the UNIX_GROUP_NAME is set to proper group id ems3010
-bash-3.2$ id ora3010
uid=60103010(ora3010) gid=60403010(ems3010) groups=60403010(ems3010)
Please Help.

Thanks Asheoran.
However the issue was with my Ora Inventory file OraInst.loc. I had actually installed 11.2.0.2 database on the same machine and as same user, and for that db I had a different OraInst.loc file. When I give the same OraInst.loc file for the EM install too, the error goes away. It seems we just need to have one Inventory file for both installations.

Re: Error while Execute External Operating System Command using T.code SM49

Dear Experts,
I Have uploaded one .exe file in the application server (eg: sum.exe) and created the OS command in SM69 transaction .
And maintained the application server path in the 'operating system command' field in SM69 t.code.
Our SAP system, oprating system is UNIX.
After I have executed the external command using transaction SM49 , but I got the below error.
Can not execute external program (permission denied) , External program terminated with exit code 1
Immediately I run the SU53 transaction code to check the authorization, but Authorization was successful.
Could any one please help on this error.
Thanks in advance.

>>Can not execute external program (permission denied) , External program terminated with exit code 1
You need to give the permission as 755 to your file.
>>I Have uploaded one .exe file in the application server (eg: sum.exe)
You are on UNIX and do not expect to any result of .exe file as UNIX doesn't know about this.

Since upgrading to FaceTime 1.0.5 (170) I am no longer able to open the application on my MacBook Pro. I am using operation system OSX 10.6.8 and being presented with error message "You have been disconnected - an internal error occurred.

No longer able to open the application on my MacBook Pro since upgrading to FaceTime 1.0.5 (170). The operating system is OSX 10.6.8.

My problem opening FaceTime after the upgrade is now solved. I didn't pay enough attention when prompted to decide where to store the application upgrade and as a consequence the computer created another "Applications" folder within the existing one. When I subsequently clicked on the icon on the dock to open the application the computer couldn't find the software.
Makerfield2

Error: Unable to manipulate operating system

In the CCM I have all services up and running, however, when I go to the CMC web page and look at the Servers, there are two servers in particular that are stopped and when I go to click on them to start I get a new page with the verbiage "Unable to manipulate operating system service for server".
What is causing the CMC to report this "error" whilst the CCM shows the service as up and running? I am logged on the server directly running both the CCM and CMC (not both at the same time).
My platform is XI R2 SP3.
Thanks,
John

Gurusamy,
Did you try creating new service for the same type of service?
This is exactly what happened, on Monday morning I wound up creating a new service (actually every service except for the Central Management Server). All other servers were sending a notice to the Apps log on the server "Fail to register with the nameserver. Please check for name duplication and validness of name used". Though no one in network ops is confessing, some type of naming convention was changed over the weekend causing all of our BO services to fail (except miraculously CMS). So I followed SAP tech note #1199817 (add and start the services, delete the duplicate services), all done successfully via CCM, however, when I went over to the CMC side of the house, some of the newly established services indicated "stopped", which I found to be quite confusing, hence this post. Tim's suggestion to delete the service in the CMC and allow it re-populate was the solution that worked.
Thanks,
John

TS130 ERROR CODE 1962 - NO OPERATING SYSTEM FOUND

Lenovo TS130 Ubuntu Server 14.04 Error 1962: This error occurred during the installation of Ubuntu Server on a hard drive that was completely deleted and then re-partioned using "use entire disk" option in the installation menu: No operating system would start regardless of the BIOS settings such as UEFI, legacy, auto; quickboot; etc.
The solution was to update the BIOS to the latest version from the Lenovo website and then enable the new securboot feature in the BIOS menu.
For the TS130, this was accomplished by burning the BIOS update on a CD after downloading for the system from the Lenovo website and then updating the server via the CD and on-screen prompts.
The optimize BIOS defaults was selected from the Exit menu in the BIOS settings to set everything back to original before the update was run.
Then the CD drive was moved upwards above the hard drive under primary in the boot menu to run the BIOS Update CD at boot.
Afterwards, there will be additional options in the BIOS menu which is where the solution lies. There is a new option below the "load optimal defaults" which is new from the BIOS update and named optimize operating system defaults. Selecting this will bring up prompts asking about enabling securboot and such but if everything is enabled, the system started Ubuntu Server 14.04 without issues.
Moderator Note; subject edited; post moved to here

Ah, bummer. Thought maybe I was onto something...
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Windows Update Client failed to detect with error 0xc8000247 after using Lenovo System Update 5

My Windows 7, SP1 was running fine, until I installed few updates on 10/15 using Lenovo System Update 5 then Windows Update stopped working, shows as RED:
{CE3119AD-35EF-41CF-9C21-C7698FEB8393}   2013-10-14 21:53:00:256-0700   1   147   101   {00000000-0000-0000-0000-000000000000}   0   0   AutomaticUpdates   Success   Software Synchronization   Windows Update Client successfully detected 4 updates.
{EB17A01A-EB6E-49FF-9EA2-AA0DD063B4B1}   2013-10-15 04:15:54:069-0700   1   162   101   {C61A0D00-3E51-48AC-B0AF-1D3E02B9E5D3}   201   0   AutomaticUpdates   Success   Content Download   Download succeeded.
{77DAE88F-2795-4258-8BBF-8D27E53662CF}   2013-10-15 12:10:38:196-0700   1   193   102   {00000000-0000-0000-0000-000000000000}   0   0   AutomaticUpdates   Success   Content Install   Restart Required: To complete the installation of the following updates, the computer must be restarted. Until this computer has been restarted, Windows cannot search for or download new updates: - Security Update for Windows 7 for x64-based Systems (KB2862330)
{1398F777-3AEF-4D1D-BE4C-407EC4AEAD4C}   2013-10-15 12:15:25:676-0700   1   183   101   {C61A0D00-3E51-48AC-B0AF-1D3E02B9E5D3}   201   0   AutomaticUpdates   Success   Content Install   Installation Successful: Windows successfully installed the following update: Security Update for Windows 7 for x64-based Systems (KB2862330)
{A220898A-E5FE-4FE7-8413-2B0C7B4013D0}   2013-10-15 12:15:25:766-0700   1   202   102   {00000000-0000-0000-0000-000000000000}   0   0   AutomaticUpdates   Success   Content Install   Reboot completed.
{A5400FF2-33ED-4A47-8409-13E5DFE16A6D}   2013-10-15 19:29:31:486-0700   1   147   101   {00000000-0000-0000-0000-000000000000}   0   0   ChkWuDrv   Success   Software Synchronization   Windows Update Client successfully detected 0 updates.
{43C533EE-775D-445E-A652-06648B72DE65}   2013-10-15 19:29:49:702-0700   1   147   101   {00000000-0000-0000-0000-000000000000}   0   0   ChkWuDrv   Success   Software Synchronization   Windows Update Client successfully detected 0 updates.
{D6AAAFFB-7F18-4A7E-B39D-1BA09CDC5E6D}   2013-10-15 19:30:05:744-0700   1   147   101   {00000000-0000-0000-0000-000000000000}   0   0   AutomaticUpdates   Success   Software Synchronization   Windows Update Client successfully detected 3 updates.
{4E73B1C1-5BA2-415D-AB34-92F7AB3DB418}   2013-10-15 19:30:08:753-0700   1   147   101   {00000000-0000-0000-0000-000000000000}   0   0   ChkWuDrv   Success   Software Synchronization   Windows Update Client successfully detected 0 updates.
{51248882-41AC-4E59-B813-87AD326310AD}   2013-10-15 20:00:05:044-0700   1   183   101   {DBD3B4E9-0357-47DA-8317-D0CF2163BFE6}   501   0   wusa   Success   Content Install   Installation Successful: Windows successfully installed the following update: Hotfix for Windows (KB2661796)
{FB2B8E5E-442C-4E76-B23D-6A41B4324C9D}   2013-10-16 00:11:39:832-0700   1   148   101   {00000000-0000-0000-0000-000000000000}   0   c8000247   AutomaticUpdates   Failure   Software Synchronization   Windows Update Client failed to detect with error 0xc8000247.
Lenovo Thinkpad W500, Intel (R), Windows 7, SP1, latest updates as of Oct 15
(1) Checked Setting, set to automatic update whenever, even changed to never update, rebooted the OS and changed back to automatic update and rebooted the OS.
(2) Stopped Windows Update Services, renamed SoftwareDistribution folder and started the window update services and rebooted.
(3) Ran MS FIXIT
(4) Ran System File checker Scan (sfc /scannow)
(5) Ran CHKDSK /F
(6) Installed "Intel Rapid Storage Technology" drivers from Lenovo site
(7) Ran Update for Windows 7 for x64-based Systems (KB971033)
None of the above possible recommended solutions were able to fix the issue yet and now I am getting a message your Window is Not Genuine!
Any help or guidance is appreciated.
Solved!
Go to Solution.

The Lenovo System Update installed the "Intel Matrix Storage Manager driver 8.9.2.1002" right before the Windows Upgrade got broken. So in the Device Manager under IDE ATA/ATAPI Controllers, I choose Intel ICH9M-E/M SATA AHCI Controller, on the Driver Tab, I choose the option "Roll Back Driver" and after rolling back the driver and restarting the OS, now Windows Update is working like a Champ!
The End!

Unzip file using operating system command in file/ftp receiver adapter

Hi,
I'm wonderdering how to unzip a zip-file in the receiver file/ftp adapter. I know it is possible to do it using the 'Operating system command' feature, but somehow the command I use seems to be ignored! (I'm using SP14, unix).
The command I entered is quite simple: unzip %F (also tried the %f, but i guess it doesn't really matter wich on I use).
Is it possible that I'm unzipping to another directory than the one i expect? the unzip should be performed to/in the current directory, and assumingly current directory is the one stated in the 'Target Directory', right?
Hope someone can clearify this issue for me.
Best regards,
Daniel

Hi Daniel,
It seems to me also, that the files are being unzipped to a different location than what you are expecting. The OS command might getting executed in some default location(i am trying to fnd that out)on the server and not in the target directory of the channel(It seems logical to me)....
If you have time...pls try this out & see whether this would help...
Have a shell script written with the following commands in them
cd <path to target directory>
unzip $1(filename from the channel)
and in the OS command in the Channel give....
<absolute path to the .sh file> %F
Thanks,
Renjith.

Most widely used operating system for oracle database

hi,
can anyone figure out which operating system is widely used for oracle database around the world.
thanks and regards,
Ashok

I don't think you can safely pick one single operating system for Oracle.
Over the years I have seen various Unix flavors, VAX/VMS, Windows and others being used to a great extent for running Oracle database.
Picking one flavor will be tougher then having to program the database under any operating system it is made available.

TestStand Error only when using Operator Interface

My testStand sequence runs correctly when I run it from the seqEditor, but when I run it from our Operator Interface (modified version of the simpleOI example), I get the following error,
"Error Message: Parameter 'Input Files': System Level Exception. [Error Code: -17502]
Input Files is a parameter of the LabView vi being called, and is an array of strings. The VI executes correctly even when called fromthe OI, but when it returns to TestStand (when called from the OI) the error occurs.
Thanks for any info and help on this. Also any info on why the simpleOI would cause an error would be appreciated too.

Hi Ray,
Here are some answers to your questions.
This VI that error's, is it part of the simpleOI or part of the Sequence File being run by the simpleOI?
---- The VI is part of a sequence file that is called by the OI.
If it is in a Sequence File, does this run in the default OI?
---- No, it's part of a new set of test sequences for our equipment.
What does the simpleIO do with the data contained in Input Files?
---- The data is just passed to another VI to load our input vectors.
What version's of TestStand and LabVIEW are you running.
---- I believe it's LV 8.5.1 and TestStand 4.0
What sort of modification have you done to the simpleOI example?
---- I think we only added our new sequences, a Operator info popup, and a few more buttons (Pass/Fail light, Change Op Info). And we removed some unused code to make it more simple.
Thanks again for your help.
Billy

Connection from jdbc or sqlj using operating system authentication

Is it possible to use the operating system authentication to connect to oracle which is on the same box from jdbc or sqlj??
Any help is appreciated

You can logon using external credentials with the oci driver by passing in null's as username and password.

My Apple G5 using operating system 10.6.8 keeps locking up. I get no warning or error message. I do get some intermittent screen distortion. Any ideas as to what could be causing this and how i get rid of this problem? Complete system re - install? N

My mac keeps locking up it s Power mac G5 Intel using 10.6.8 OS.X. I get no warning or error messages it just locks up and the only way to get it to work again is to depress power button and restart. Its random intermittent and incredibly frustrating. I do get some screen distortion from time to time and wondered whether it may be a graphics card issue or whether it could be solved with a complete system re-install and OS upgrade?

According to everymac.com, your Mac came with Tiger, 10.4.x and can't go any higher than Lion, 10.7.x.
It would have come with gray, machine specific disks. Since there's no reason to install 10.4.x first, and then Snow Leopard over that, just purchase a retail copy of Snow Leopard for $20. What you won't get with the retail version of SL is the iLife suite (Garage Band, iDVD, etc.) that were on the original bundled disks, but you can purchase iLife on Amazon pretty cheap, and get newer versions besides.
When you get Snow Leopard, you can boot to the DVD, erase the drive and install everything clean. Hopefully, you issue is only software, and not hardware related.

Error al iniciar "USING OPERATING SYSTEM"

Similar Messages

Maybe you are looking for