Error: An error occurred importing the file. Detail: File does not exist or

Hi,
I am getting the error the below error while importing the file in FDM. I have read and write access to the folder. I tried loading text and excel files, I am getting the same error.
An error occurred importing the file.
Detail: File does not exist or access denied.
Thanks.

Hi Tony,
Thanks for the reply.
I have Oracle Database and the version is 11.1.0.7; So even for this version do I need to have SQLLDR.exe on the server where FDM is installed.
Thanks,
Edited by: user10720012 on May 16, 2011 11:42 AM

Similar Messages

System error 86 has occurred. The specified network password is not correct. - despite the NTLMv2 fix

After the Windows 2008 R2 64 bit server got below 2 updates a network share is no longer available. And trying to remap it with correct credentials (that work on a Windows 8.1 64 bit) gives this error: "System error 86 has occurred. The specified network
password is not correct."
Local Policies -> Security Options -> Network Security: LAN Manager Authentication Level
is already set to "LM and NTLM - use NTLMV2 session security if negotiated"
In fact this is how it was working earlier. And it hasn't been changed.
Below 2 updates were installed in past few days:
Definition Update for Microsoft Endpoint Protection - KB2461484 (Definition 1.185.3528.0)
Update for Windows (KB974405)

Hi,
Does the network share a DFS share? If so, please install the hotfix below to check the results.
You cannot access a DFS share by using a valid user account in Windows Server 2008 R2, in Windows 7, in Windows Vista or in Windows Server 2008
http://support.microsoft.com/kb/2549311
Best Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Hi i am getting an error like this while installing Live Cycle Server " The file merge_modules\lc11_common_iam_zip does not exist This file is required sucessfullly run the Live Cycle Installer.Can any one help me on resolving this issue it would be of g

Hi i am getting an error like this while installing Live Cycle Server " The file merge_modules\lc11_common_iam_zip does not exist This file is required sucessfullly run the Live Cycle Installer.Can any one help me on resolving this issue it would be of great help..thanks .

I think in your situation it would be worth trying the things listed under the event. It does have to do with FRS and it's easy to do. I've used it to fix journal errors after a server unexpectedly restarts and sysvol stops replicating. I
could see where it could fix your issue, and if it doesn't, you're out 5 minutes. :)
The listed registry key does not exist
Expand HKEY_LOCAL_MACHINE.
Click down the key path:
"System\CurrentControlSet\Services\NtFrs\Parameters"
Double click on the value name
"Enable Journal Wrap Automatic Restore"

When I tried to run php file I am getting the following error message, "/home/karthick/Desktop/PHP files/third.php could not be opened, because the associated helper application does not exist. Change the association in your preferences." How to fix this?

When I tried to run php file I am getting the following error message, "/home/karthick/Desktop/PHP files/third.php could not be opened, because the associated helper application does not exist. Change the association in your preferences." How to fix this?

first, you just asked me to use MS file Explorer to see what the properties were.,..and to ask what happened. Yes - that's on my hard drive. The problem I have is opening word files in a DB that is web enabled.....I've used Firefox browser for that, and everything else , for years...... When I look at the Tools, and options on FireFox., as your support page noted.....NOTHING is listed in the Applications tab....hence my note asking for help. The file I need to open is a Word file out on a web enabled DB. It's not on my hard drive - I have to problems opening docs there - but for that, I don't use Firefox

Error while trying to retrieve the task: EventId(complete) does not belong

Hi Experts,
I have created a process composer DC in which i have created a process with two human tasks.
Each tasks is binded with web dynpro Iviews (means followed all the steps neccesary).
I deploed the DC successfully. now i started the process and got a task in my UWL but on click of the task i got the below error.
Error while trying to retrieve the task: EventId(complete) does not belong to referenced component interface of ComponentUsage(com.sap.tc.bpem.wdui.appcontainer.containercomp.ContainerComp:com.infosys.mdm.LoadRepositoryComp, createOnDemand=false, childComponent=com.infosys.mdm.LoadRepositoryComp)
[EXCEPTION]
java.lang.IllegalArgumentException: EventId(complete) does not belong to referenced component interface of ComponentUsage(com.sap.tc.bpem.wdui.appcontainer.containercomp.ContainerComp:com.infosys.mdm.LoadRepositoryComp, createOnDemand=false, childComponent=com.infosys.mdm.LoadRepositoryComp)
I have rechecked the event that i have created in the component controller and Interface controller.
Can you please help me in debunging the error.
thanks
Narendra

Hi,
sounds like an program error. That is an problem which occurs if one or multiple components try to lock the same galaxy object at the same point in time. Did you configured something special on the given task? e.g deadlines?
My proposal is to open an Customer Message so that we can have a detailed look onto the system. If this is not possible could you please provide the complete trace file and some more details about the modeled task?
Best Regards
Andreas

Windows 8 Remote Desktop Error "The Requested Security Package Does Not Exist"

When my remote host (win server 2008 R2) is configured to use SSL for security layer, RDP from my Windows 8 gets
"An authentication error has occurred. The requested security package does not exit."
When the host is set to use RDP security layer, it works fine.
Registry key solution for Win7 suggested on other posts does not seem to apply to win8.
This is a Lenovo desktop, I uninstalled silverlight and bunch of other OEM installed programs.

This fixed my problem in Windows 8 while connecting to a Windows 7 host. I needed the pku2u entry. I decided to look it up and here's the info for anyone that's interested.
Introducing PKU2U in Windows
Applies To: Windows 7, Windows Server 2008 R2
This product evaluation topic for the IT professional describes the Public Key Cryptography Based User-to-User (PKU2U) security support provider (SSP) that is new in Windows 7 and Windows Server 2008 R2.
PKU2U protocol
The PKU2U protocol in Windows 7 and Windows Server 2008 R2 is implemented as an SSP. The SSP enables peer-to-peer authentication, particularly through the Windows 7 media and file sharing feature called Homegroup, which permits sharing
between computers that are not members of a domain.
How PKU2U works
Windows 7 and Windows Server 2008 R2 introduce an extension to the Negotiate authentication package, Spnego.dll. In previous versions of Windows, Negotiate decides whether to use Kerberos or NTLM for authentication. The extension SSP for Negotiate,
Negoexts, which is treated as an authentication protocol by Windows, supports Microsoft SSPs including PKU2U. You can also develop or add other SSPs.
When computers are configured to accept authentication requests by using online IDs, Negoexts.dll calls the PKU2U SSP on the computer that is used to log on. The PKU2U SSP obtains a local certificate and exchanges the policy between the peer computers. When
validated on the peer computer, the certificate within the metadata is sent to the logon peer for validation and associates the user's certificate to a security token and the logon process completes.
For more information about developing SSPs, see
Custom Security Packages in the MSDN Library.
For more information about the Negotiate extensions (Negoexts), see
Introducing Extensions to the Negotiate Authentication Package.

Part of Photoshop isn't functioning. Under adjustments, when HDR toning is clicked on I get a code: Error 48: File or folder does not exist. Line:11 - $.evalFile(g_StackScriptFolderPath "StackSupport.jsx"); How can it be fixed?

The phone company was here working on something while I was gone. They sat down at my computer (iMac) and since then HDR toning doesn't work. Get the code: Error 48: File or folder does not exist. Line: 11 -> $.evalFile(g_StacScriptFolderPatch + "StackSupport.jsx"); How can this be fixed?

Go to //Applications/Adobe Photoshop [Version]/Presets/ Scripts/Stack Scripts Only/ and see if StackSupport.jsx is there. If it is not, uninstall and reinstall Photoshop to have it added back in. If it is there, first try recreating the Photoshop Preferences (hold down Command+Option+Shift while launching Photoshop).

HDR Toning Error 48: File or Folder Does Not Exist

After migrating to a new computer HDR Toning is no longer available.
I get a pop-up: Error 48: File or Folder Does Not Exist
Line 11 -> $. evalFile(g_StackScriptFolderPath + "StackSupport.jsx");
What's the fix for this, if anyone knows?
Thanks.

Go to //Applications/Adobe Photoshop [Version]/Presets/ Scripts/Stack Scripts Only/ and see if StackSupport.jsx is there. If it is not, uninstall and reinstall Photoshop to have it added back in. If it is there, first try recreating the Photoshop Preferences (hold down Command+Option+Shift while launching Photoshop).

Ruler Tool- Error 48: File or folder does not exist

I am trying to use the new RULER TOOL in CS5 (64-bit mode) running 10.6.4 and I get the following error:
Error 48: File or folder does not exist.
Line: 31
-> $.evalFile( g_StackScriptFolderPath + "Geometry.jsx");
Any ideas?

i'm getting the exact error using Windows XP with CS5.5
error 48: file or folder does not exist
line: 31
-> $.evalFile(g_StackScriptFolderPath + "Geometry.jsx");
HELP!!!
someone
hello ... anyone out there?
how do we get support for this error?
e

Cannot optimize volume - Receive error "The specified extrinsic Method does not exist"

When I try to optimize a volume on a server running Windows Server 2012 (R1). I receive the below error. This volume is an ISCSI target to our Compellent SAN. Other Servers don't have an issue with volumes created on the same SAN and I have already ran ChkDsk
and it returned no errors. Oddly enough I can run a "Defrag T: /D" but a "Defrag T: /O" returns
"Incorrect Function. (0x80070001)" (Incidentally an "Optimze-Volume T -Defrag" also works)
Any Ideas? I'm stumped!
Command:
Optimize-Volume -DriveLetter T -Verbose
Error:
VERBOSE: Invoking slab consolidation on iSCSI_SAN01_ExchLogFiles (T:)...
VERBOSE: Slab Analysis: 100% complete.
optimize-volume : The specified extrinsic Method does not exist.
At line:1 char:1
+ optimize-volume -DriveLetter T -Verbose
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : MetadataError: (MSFT_Volume (Ob...2-a802-ba7e...):ROOT/Microsoft/...age/MSFT_Volume) [Optimize-Volume], CimException
+ FullyQualifiedErrorId : MI RESULT 17,Optimize-Volume

I did stumble upon that article as well and working through it didn't help. This is an Exchange 2013 server but I wouldn't think that that would exclusively cause a problem like this (unless there is something under the hood that Exchange 2013 is secretly
doing). The C drive is for the OS, the M drive is for the Exchange DB, and the
T drive is for the Logs. The C drive is "directly" connected and the M and T drives are on the same SAN (different LUNs) via iSCSI. This is running as a virtual guest on VMWare ESXi v5.5. I have other servers setup the
same way (not Exchange servers though) with drives on the iSCSI SAN and there are no issues when I run those Optimize-Volume commands. Here is some more output from the console:
PS C:\Users\administrator> Optimize-Volume -DriveLetter T -Analyze -Verbose
VERBOSE: Invoking slab consolidation on iSCSI_SAN01_ExchLogFiles (T:)...
VERBOSE: Slab Analysis: 0% complete...
Optimize-Volume : The specified extrinsic Method does not exist.
At line:1 char:1
+ Optimize-Volume -DriveLetter T -Analyze -Verbose
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : MetadataError: (MSFT_Volume (Ob...2-a802-ba7e...):ROOT/Microsoft/...age/MSFT_Volume) [Optimize-Volume], CimException
+ FullyQualifiedErrorId : MI RESULT 17,Optimize-Volume
PS C:\Users\administrator> Optimize-Volume -DriveLetter M -Analyze -Verbose
VERBOSE: Invoking slab consolidation on iSCSI_SAN01_ExchMailStoreDB (M:)...
VERBOSE: Slab Analysis: 0% complete...
Optimize-Volume : The specified extrinsic Method does not exist.
At line:1 char:1
+ Optimize-Volume -DriveLetter M -Analyze -Verbose
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : MetadataError: (MSFT_Volume (Ob...2-93f1-0050...):ROOT/Microsoft/...age/MSFT_Volume) [Optimize-Volume], CimException
+ FullyQualifiedErrorId : MI RESULT 17,Optimize-Volume
PS C:\Users\administrator> Optimize-Volume -DriveLetter C -Analyze -Verbose
VERBOSE: Invoking analysis on (C:)...
VERBOSE: Analysis: 0% complete...
VERBOSE: Analysis: 22% complete...
# ... Repeated ...
VERBOSE: Analysis: 94% complete...
VERBOSE: Analysis: 99% complete...
VERBOSE: Analysis: 100% complete...
VERBOSE: Analysis: 100% complete.
VERBOSE:
Post Defragmentation Report:
VERBOSE:
Volume Information:
VERBOSE: Volume size = 84.48 GB
VERBOSE: Cluster size = 4 KB
VERBOSE: Used space = 63.18 GB
VERBOSE: Free space = 21.29 GB
VERBOSE:
Fragmentation:
VERBOSE: Total fragmented space = 4%
VERBOSE: Average fragments per file = 1.23
VERBOSE: Movable files and folders = 153593
VERBOSE: Unmovable files and folders = 6
VERBOSE:
Files:
VERBOSE: Fragmented files = 2745
VERBOSE: Total file fragments = 35394
VERBOSE:
Folders:
VERBOSE: Total folders = 4819
VERBOSE: Fragmented folders = 2
VERBOSE: Total folder fragments = 2
VERBOSE:
Free space:
VERBOSE: Free space count = 74005
VERBOSE: Average free space size = 296.00 KB
VERBOSE: Largest free space size = 409.42 MB
VERBOSE:
Master File Table (MFT):
VERBOSE: MFT size = 308.00 MB
VERBOSE: MFT record count = 315391
VERBOSE: MFT usage = 100%
VERBOSE: Total MFT fragments = 4
VERBOSE: Note: File fragments larger than 64MB are not included in the fragmentation statistics.
VERBOSE:
You do not need to defragment this volume.

Line 1 Error - Value 120 for the flexfield segment Company does not exist

{color:#0000ff}Receiving the following error message in the "Submit Expense Report - Expense Allocation" page:
"Error : Line 1 Error - Value 120 for the flexfield segment Company does not exist in the value set XX_GL_COMPANY"
This error message is shown when the user is entering the expense report in R12 Oracle Internet Expenses responsibility. After the user has finished entering the expense lines and after the user has reviewed the default expense allocation values in the expense allocation page, upon clicking on the next button , this error message is shown.
Has anybody experienced this issue?
We have opened a Service Request with Oracle but so far there is no resolution. This issue occurs intermittently. It is NOT consistent. We have advised the user base with the following workarounds to over this bug:
1. The system administrator shall clear the cache using Functional Administrator responsonsibility
OR
2. Advise the application user to sign-off from Oracle Applications and allow 5 minutes before they sign-in again.
Any help or advise in the matter is appreciated.
Thank you.
{color}

Check these things
1. you have enable PerPeriodOfService DFF to this set.
2. you are setting Context Variable like (AttributeCategory) with requried value.
Thanks

What action dom i take for this error message "C:\DOCUME~1\user\LOCALS~1\Temp\physics.pdf could not be opened, because the associated helper application does not exist. Change the association in your preferences"?

I get this message when I try to download a pdf file from a website.
"C:\DOCUME~1\user\LOCALS~1\Temp\physics.pdf could not be opened, because the associated helper application does not exist. Change the association in your preferences."
This is a new error. There used to be no problem.

Do you have any setting for MP3 in Tools > Options > Applications ?
You usually need the QuickTime plugin to play MP3 files on Windows because that is the only plugin that supports that file extension if there is no MIME type specified to play the file with another plugin like Windows Media Player or RealPlayer.

Getting error 462 - The remote server machine does not exist or is unavailable

I have several modules that read and write data to and from Excel 2010 worksheets. I am noticing that the Excel process does not end aven though Excel is not running on my PC. It is like an orphan process. If I try running the Access module again I get the
message "error 462 - The remote server machine does not exist or is unavailable". Here is the code I am running. When I click the Debug button on the message box the line "rowNum = objXLAppln.Range("A" & Rows.Count).End(xlUp).Row"
is highlighted.
Option Compare Database
Option Explicit
Function ImportImportanceScores()
Dim RecSet As DAO.Recordset
Dim objXLAppln As Excel.Application
Set objXLAppln = New Excel.Application
Dim objWBook As Excel.Workbook
Dim rowNum As Variant
Dim i As Integer
Dim j As Integer
Dim StrPathFile As String, strFile As String, strPath As String
Dim strBrowseMsg As String, strInitialDirectory As String, strFilter As String
'show dialogue box
strBrowseMsg = "Select the EXCEL file:"
'set directory to load files from
strInitialDirectory = "C:\Bridge_CIP_Part-A_B\"
'run strFilter function
strFilter = ahtAddFilterItem(strFilter, "Excel Files (*.xlsx)", "*.xlsx")
StrPathFile = ahtCommonFileOpenSave(InitialDir:=strInitialDirectory, _
Filter:=strFilter, OpenFile:=True, _
DialogTitle:=strBrowseMsg, _
Flags:=ahtOFN_HIDEREADONLY)
If StrPathFile = "" Then
MsgBox "No file was selected.", vbOK, "No Selection"
Exit Function
End If
'Set Excel application object. Critical for macro to run properly. Do not change.
'Open workbook and worksheet to load data.
With objXLAppln
Set objWBook = objXLAppln.Workbooks.Open(StrPathFile)
objXLAppln.Visible = True
End With
Set RecSet = CurrentDb.OpenRecordset("Importance_Scores")
'Copy data from Excel cells to Access fields
objXLAppln.Sheets("Importance_Scores").Select
rowNum = objXLAppln.Range("A" & Rows.Count).End(xlUp).Row
objXLAppln.Range("A6").Select
'Add records to table from Excel
With RecSet
For i = 0 To rowNum - 6
RecSet.AddNew
RecSet.Fields("CIP_ID").value = objXLAppln.ActiveCell.Offset(i, 0).value
RecSet.Fields("Target_Timeframe_for_Construction").value = objXLAppln.ActiveCell.Offset(i, 2).value
RecSet.Fields("ImportanceFactor_TI-1").value = objXLAppln.ActiveCell.Offset(i, 21).value
RecSet.Fields("ImportanceFactor_TI-2").value = objXLAppln.ActiveCell.Offset(i, 22).value
RecSet.Fields("ImportanceFactor_TI-3").value = objXLAppln.ActiveCell.Offset(i, 23).value
RecSet.Fields("ImportanceFactor_TI-4").value = objXLAppln.ActiveCell.Offset(i, 24).value
RecSet.Fields("ProjectRank").value = objXLAppln.ActiveCell.Offset(i, 33).value
RecSet.Update
Next i
End With
'Close everything
RecSet.Close
objWBook.Close SaveChanges:=False
objXLAppln.Quit
Set RecSet = Nothing
Set objWBook = Nothing
Set objXLAppln = Nothing
End Function

In the line
rowNum = objXLAppln.Range("A" & Rows.Count).End(xlUp).Row
Rows does not refer to objXLAppln or to objWBook. Change it to
rowNum = objXLAppln.Range("A" & objWBook.Sheets("Importance_Scores").Rows.Count).End(xlUp).Row
Regards, Hans Vogelaar (http://www.eileenslounge.com)

RDS Gateway + Smart Card Error [ The specified user name does not exist.]

I have the following Windows Server 2008 R2 servers:
addsdc.contoso.com, AD DS Domain Controller for contoso.com
adcsca.contoso.com, AD CS Enterprise CA, CDPs/AIAs published externally.
fileserver.contoso.com, RDS Session Host for Administration enabled
rdsgateway.contoso.com, RDS Gateway enabled
tmgserver.contoso.com, 'Publishing' rdsgateway.contoso.com but with pass-through authentication
And the following Windows 7 PCs:
internalclient.contoso.com
externalclient.fabrikam.com
There's no trust between the domains, the external client is completely separate on the internet but the CA certificate for contoso.com has been installed in the trusted Root CA store. All servers have certificates for secure RDP.
I enrolled for a custom 'Smart Card Authentication' certificate with Client Authentication and Smart Card Logon EKUs from the CA, stored on my new Gemalto smart card using the Microsoft Base Smart Card CSP.
From internalclient.contoso.com, I can RDP to fileserver.contoso.com
using the smart card just fine with no certificate errors.
From externalclient.fabrikam.com, I can RDP to fileserver.contoso.com
via rdsgateway.contoso.com using a username and password just fine with no certificate errors.
From externalclient.fabrikam.com, I can RDP to fileserver.contoso.com
via rdsgateway.contoso.com using the smart card to authenticate to the gateway, and a username and password to authenticate to the end server, just fine.
BUT from when using a smart card to authenticate to the end server via the gateway, it fails with:
The specified user name does not exist. Verify the username and try logging in again. If the problem continues, contact your system administrator or technical support.
When I move the client into the internal network and try the connection again (still via the RDS Gateway), it works fine - the only thing I can think of is being outside the network and not being able to contact the AD DS DC for Kerberos is causing the issue
- but I'm pretty sure this is a supported scenario?
The smart card works fine internally, the subject of the certificate is the user's common name (John Smith) and the only SAN is
[email protected] which matches the UPN of the user account as it was auto-enrolled.
Does anyone have any ideas?

I had a similar issue where I am using a smart card through a Remote Desktop Gateway. I had to disable Network Level Authentication (NLA) on the destination Remote Desktop Server. If anyone has another way around this, I'd appreciate hearing it. I'd prefer
to use NLA.

HT3702 When trying to purchase an app an error message comes up saying the info I entered does not match my banking info. The odd thing is, the $1.00 hold is shown immediately on my credit card acct. , so I obviously did enter it correctly. Tried 5 times.

When trying to purchase an app an error message comes up saying the info I entered does not match my banking info. The odd thing is, the $1.00 hold is shown immediately on my credit card acct. , so I obviously did enter it correctly. Tried 5 times. Any suggestions

When trying to purchase an app an error message comes up saying the info I entered does not match my banking info. The odd thing is, the $1.00 hold is shown immediately on my credit card acct. , so I obviously did enter it correctly. Tried 5 times. Any suggestions

Error in data loading "The object R3TR AQQU *does not exist"

Hello Guys,
I am trying to load full data from my datasource to DSO but whenever i am running infopackage, its failing with error message
"Job terminated in source system Message no. RSM078"
I am checking in job overview it said
"The object R3TR AQQU * does not exist
The TADIR entry for the object R3TR AQQU SYSTBWGENER0SY000000000102 cannot be entered because the object does not exist yet."
Please suggest.
Regards,
Dolly

Hi Dolly,
I think your DS is based on an ABAP query which is not available in the source system. Check if that is transported/active.

Error: An error occurred importing the file. Detail: File does not exist or

Similar Messages

Maybe you are looking for