Error "An error occurred on starting the workflow" when creating Timesheet

Hi..I have copied a standard task for Timesheet approval...and have assigned to profile..but when creating timesheet i'm getting error as "An error occurred on starting the workflow" .. could anyone help me out from this issue..
Thanks
shankar

HI Shankar,
I have the same error you listed here for a few employees. Could you please tell me how you resolved this?
I've searched other posted messages and look like we've set up the timeshee approval correctly, but still have this error.
Any information provided is appreciated.
Thanks,
Tam

Similar Messages

CAT2 & CATS - An error occurred on starting the workflow

We have just finished upgrading from 4.6c to 6.0.
Now, whenever we try to enter time using CAT2, we get an error when saving which states "An error occurred on starting the workflow."
And when we try to enter time using ESS via the portal, we get a message which states unable to save data.
I'd just like to enter some time.
Any ideas on how I can resolve this?

Hi Jefferson,
I had the same problems before with 6.0 below is the link from sap library about details of the task.
http://help.sap.com/saphelp_nw04/helpdata/en/64/4003e1470211d189720000e8322d00/frameset.htm
Use these tasks in your data entry profiles in the configuration via IMG Activity in transaction SPRO->Cross-Application Components->Time Sheet->Specific Settings for CATS Regular->CATS regular->Record Working time->Set Up Data Entry Profiles.
Take note that you still have to tick the with workflow box and you use these task here.
Now if everything is ok with the time entry and approval for other users check the data entry profile that the user uses in CAT2, it may not be the data entry profile that you have set-up in the IMG.
Also, check the org structure if you have approvers for the CAT user (tcode PPOME). Note that there is no escalation present in these task so if an approver in the org structure is missing it does not get to the next approver.
Although SAP documentation says that the opwrkflow is optional although you have the task this also causes the problem, so it is betther to disable the workflow and use the recommended task.
Use this link: http://help.sap.com/saphelp_nw04/helpdata/en/04/928ad246f311d189470000e829fbbd/content.htm
as the above link is for CATS in general
Cheers,
Edited by: Erwin Wee on Mar 11, 2008 3:00 AM

Something went wrong. To try again, reload the page and then start the workflow, error on starting a workflow

i have already create a custom workflow with sharepoint designer and checked for error and it seem fine. i published it on my document library so apprear the first issue : the column that contain the name of my workflow apprear and the link to start my workflow(contain
the name of my first stap) doesn't appear. the second problem is that when i tried to start the workflow manually on a specific document i get an alert : Something went wrong. To try again, reload the
page and then start the workflow
i tried : -restart service bus message broker -restart service bus gateway -recycle workflowMgntpool -flushed the dsn resolver cache and the problem still occure
on uls log viewer it seems to be an error on w3wp.exe process
the workflow history is empty

Hi Mokhtar,
For your first issue, when you publish a workflow to your document library, only after you start the workflow, then the link to go on the workflow(contain the name of the workflow stage) will appear.
For your second issue, my understanding is that you got an error when you manually start a SharePoint Designer 2013 Workflow.
Please go to Administrative Tools->Services, make sure the following services are started.
Workflow Manager Backend
Service Bus Message Broker
Service Bus Gateway
Windows Fabric Host Service
Here are similar posts for you as a reference:
https://social.msdn.microsoft.com/Forums/office/en-US/12f8ae26-6889-4227-a3fc-dd29a38230a6/something-went-wrong-to-try-again-reload-the-page-and-then-start-the-workflow?forum=sharepointcustomization
http://community.office365.com/en-us/f/154/t/277480.aspx
If the issue still exists, please check Event Viewer to check more information about this issue.
http://msdn.microsoft.com/en-us/library/jj193526(v=azure.10).aspx
I hope this helps.
Best Regards,
Lisa Chen
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Failed to run task sequence. Error occurred while starting the task sequence (0x8007000E)

Hi there
Patch Tuesday yesterday (10th June2014). As always we deploy new patches first to a test collection where Windows 7 updates automatically apply.
Upon trying to rebuild any of the machines in this test collection, we were presented with the following error message:
Failed to run task sequence. Error occurred while starting the task sequence (0x8007000E)
After searching about this, I found this page from Niall Brady, which explained the problem:
http://www.niallbrady.com/2013/05/17/after-selecting-a-task-sequence-in-configuration-manager-2012-sp1-you-receive-threadtoresolveandexecutetasksequence-failed-code0x8007000e-in-smsts-log/
So I removed some of the machines from the test Windows update collection, and as per the advice in the above link, the error was gone and those machines could be built successfully.
So the problem is there were too many many policies downloaded (apps, packages and most of all updates) for the task sequence ram to store, hence the error.
Now...
...I have a question.
The next logical step to my mind is to patch our OS image with all missing patches, so these do not have to be downloaded at build time. Niall mentions this as one of the resolutions to this issue.
However there seems to be some confusion over whether this would actually make a difference.
I read through this link:
http://social.technet.microsoft.com/Forums/en-US/7e597b44-2586-4063-b6d0-cec48a7c11c7/sccm-2012-task-sequence-failure-0x8007000e?forum=configmanagerosd
There's seems to be no consensus on this.
Is SCCM 2012 clever enough to - when the task sequence is first started - to download ONLY the updates (policies) it detects as NOT present in the OS image...
or
Will it simply try to download policies for ALL items deployed to it, whether the updates are present in the OS image or not?
I will be disappointed if SCCM 2012 SP1 CU2 isn't clever enough to only download policies at build time for the apps, packages and updates it detects as needed.
I'd be grateful for some clarity on this.
Regards,
John, Glasgow.

Hi Jason
Thank you for replying, I appreciate it.
1) We currently have 15 or 16 software update groups for Office updates, dating back a month or two. The latest software update group contains all the patches in the previous software update groups plus the patches released on 10th June. Do you recommend
deleting all but the latest software update group?
2) I'm almost reluctant to ask this, but based on what you have advised, is it the case that when the task sequence executes, it will download policies for each update in each software update group regardless of whether it has already downloaded a policy
for an update in a previous software update group? So in effect it's downloading policies (for updates) it has already downloaded?
3) I'm not clear on why there would be no policy for an image; in Niall Brady's informative page on the 8007000E error, he writes the following:
"The reason it has run of space could be due to four possibilites: too many applications, too many Windows updates, too many Task Sequence steps, too many referenced packages'.
Can you shed some light on why there isn't a policy for an image?
Thanks again for replying,
John.

OSD - Failed to run Task Sequence. An error occurred while starting the task sequence (0x8007000E).

Failed to run Task Sequence.
An error occurred while starting the task sequence (0x8007000E)."
While OSD, picks up task sequence but fails in resolving task sequence dependencies. SMSPXE identifies device is not in database (unknown).
SMSTS.log shows
ThreadToResolveAndExecuteTaskSequence failed. Code(0x8007000E)" in SMSTS.LOG, have seen other articles suggesting failure due to lack of storage (RAM) but this task sequence has worked in past.
By the way, if I create a stand alone media, we are able to image the workstation. What has changed in the task sequence such that the workstation is unable to download policies due to lack of storage (RAM) on workstation. Workstation has 2 GB of RAM.

I have found a work around for the issue, even though the computer is unknown, there were software updates targeted to the ALL SYSTEMS collection which applies to All Unknown Computers and therefore to x64 Unknown Computer and x86 Unknown Computer.
We had a SCEP ADR applying definition updates to All Systems, we applied the ADR to a different collection, removed all the SCEP updates to All Systems and successfully re-imaged the workstation. Following article was of great help in identifying the problem
after-selecting-a-task-sequence-in-configuration-manager-2012-sp1-you-receive-threadtoresolveandexecutetasksequence-failed-code0x8007000e-in-smsts-log
Thanks Gerry for your assistance.

Getting an error, Unable to properly connect to the workflow service while attaching workflow to the list manually

Hello Experts,
I am facing an issue on test server while attaching workflow manually to the list.
On dev environment I am deploying workflow through visual studio and here everything works fine.
Please suggest if anyone has faced this issue earlier.
Regards,
Uday G
Line 3874: 04/27/2015 02:02:15.72 w3wp.exe (0x1708)
0x15E0
SharePoint Foundation Logging Correlation Data
xmnv Medium
Name=Request (POST:http://spwfte800-001:80/_layouts/15/AssocWrkfl.aspx?AssociatedList=0b6b6303-d8ac-4007-94d0-5cf5502df0f6&WF4=1)
9ac4009d-b5ca-c010-44e2-238aad763833
Line 3875: 04/27/2015 02:02:15.73
w3wp.exe (0x1708)
0x15E0
SharePoint Foundation Authentication Authorization
agb9s Medium
Non-OAuth request. IsAuthenticated=True, UserIdentityName=0#.w|usykgw\sp_farm_te, ClaimsCount=30
9ac4009d-b5ca-c010-44e2-238aad763833
Line 3876: 04/27/2015 02:02:15.73
w3wp.exe (0x1708)
0x15E0
SharePoint Foundation Logging Correlation Data
xmnv Medium
Site=/ 9ac4009d-b5ca-c010-44e2-238aad763833
Line 3877: 04/27/2015 02:02:15.80
w3wp.exe (0x1708)
0x15E0
SharePoint Foundation Database
ahjqp High
[Forced due to logging gap, cached @ 04/27/2015 02:02:15.78, Original Level: Verbose] SQL connection time: 0.093 for Data Source=SPDBTE800-001\MYNET_SQL;Initial Catalog=WSS_Content_80;Integrated Security=True;Enlist=False;Pooling=True;Min Pool Size=0;Max
Pool Size=100;Connect Timeout=15;Application Name=SharePoint[w3wp][2][WSS_Content_80]
9ac4009d-b5ca-c010-44e2-238aad763833
Line 3878: 04/27/2015 02:02:15.80
w3wp.exe (0x1708)
0x15E0
SharePoint Foundation Files
ak8dj High
UserAgent not available, file operations may not be optimized. at Microsoft.SharePoint.SPFileStreamManager.CreateCobaltStreamContainer(SPFileStreamStore spfs, ILockBytes ilb, Boolean copyOnFirstWrite, Boolean disposeIlb) at
Microsoft.SharePoint.SPFileStreamManager.SetInputLockBytes(SPFileInfo& fileInfo, SqlSession session, PrefetchResult prefetchResult) at Microsoft.SharePoint.CoordinatedStreamBuffer.SPCoordinatedStreamBufferFactory.CreateFromDocumentRowset(Guid
databaseId, SqlSession session, SPFileStreamManager spfstm, Object[] metadataRow, SPRowset contentRowset, SPDocumentBindRequest& dbreq, SPDocumentBindResults& dbres) at Microsoft.SharePoint.SPSqlClient.GetDocumentContentRow(Int32 rowOrd,
Object ospFileStmMgr, SPDocumentBindRequest& dbreq, SPDocumentBindResults& dbres...
9ac4009d-b5ca-c010-44e2-238aad763833
Line 3879: 04/27/2015 02:02:15.80*
w3wp.exe (0x1708)
0x15E0
SharePoint Foundation Files
ak8dj High
...) at Microsoft.SharePoint.Library.SPRequestInternalClass.GetFileAndMetaInfo(String bstrUrl, Byte bPageView, Byte bPageMode, Byte bGetBuildDependencySet, String bstrCurrentFolderUrl, Int32 iRequestVersion, Byte bMainFileRequest, Boolean&
pbCanCustomizePages, Boolean& pbCanPersonalizeWebParts, Boolean& pbCanAddDeleteWebParts, Boolean& pbGhostedDocument, Boolean& pbDefaultToPersonal, Boolean& pbIsWebWelcomePage, String& pbstrSiteRoot, Guid& pgSiteId, UInt32& pdwVersion,
String& pbstrTimeLastModified, String& pbstrContent, UInt32& pdwPartCount, Object& pvarMetaData, Object& pvarMultipleMeetingDoclibRootFolders, String& pbstrRedirectUrl, Boolean& pbObjectIsList, Guid& pgListId, UInt32& pdwItemId,
Int64& pllListFlags, Boolean& pbAccessDenied, Guid& pgDocid, Byte& piLevel, UInt64& ppermMask, ...
9ac4009d-b5ca-c010-44e2-238aad763833
Line 3880: 04/27/2015 02:02:15.80*
w3wp.exe (0x1708)
0x15E0
SharePoint Foundation Files
ak8dj High
...Object& pvarBuildDependencySet, UInt32& pdwNumBuildDependencies, Object& pvarBuildDependencies, String& pbstrFolderUrl, String& pbstrContentTypeOrder, Guid& pgDocScopeId) at Microsoft.SharePoint.Library.SPRequestInternalClass.GetFileAndMetaInfo(String
bstrUrl, Byte bPageView, Byte bPageMode, Byte bGetBuildDependencySet, String bstrCurrentFolderUrl, Int32 iRequestVersion, Byte bMainFileRequest, Boolean& pbCanCustomizePages, Boolean& pbCanPersonalizeWebParts, Boolean& pbCanAddDeleteWebParts, Boolean&
pbGhostedDocument, Boolean& pbDefaultToPersonal, Boolean& pbIsWebWelcomePage, String& pbstrSiteRoot, Guid& pgSiteId, UInt32& pdwVersion, String& pbstrTimeLastModified, String& pbstrContent, UInt32& pdwPartCount, Object&
pvarMetaData, Object& pvarMultipleMeetingDoclibRootFolders, String& pbst...
9ac4009d-b5ca-c010-44e2-238aad763833
Line 3881: 04/27/2015 02:02:15.80*
w3wp.exe (0x1708)
0x15E0
SharePoint Foundation Files
ak8dj High
...rRedirectUrl, Boolean& pbObjectIsList, Guid& pgListId, UInt32& pdwItemId, Int64& pllListFlags, Boolean& pbAccessDenied, Guid& pgDocid, Byte& piLevel, UInt64& ppermMask, Object& pvarBuildDependencySet, UInt32&
pdwNumBuildDependencies, Object& pvarBuildDependencies, String& pbstrFolderUrl, String& pbstrContentTypeOrder, Guid& pgDocScopeId) at Microsoft.SharePoint.Library.SPRequest.GetFileAndMetaInfo(String bstrUrl, Byte bPageView, Byte
bPageMode, Byte bGetBuildDependencySet, String bstrCurrentFolderUrl, Int32 iRequestVersion, Byte bMainFileRequest, Boolean& pbCanCustomizePages, Boolean& pbCanPersonalizeWebParts, Boolean& pbCanAddDeleteWebParts, Boolean& pbGhostedDocument,
Boolean& pbDefaultToPersonal, Boolean& pbIsWebWelcomePage, String& pbstrSiteRoot, Guid& pgSiteId, UInt32& pdwVersion,...
9ac4009d-b5ca-c010-44e2-238aad763833
Line 3882: 04/27/2015 02:02:15.80*
w3wp.exe (0x1708)
0x15E0
SharePoint Foundation Files
ak8dj High
... String& pbstrTimeLastModified, String& pbstrContent, UInt32& pdwPartCount, Object& pvarMetaData, Object& pvarMultipleMeetingDoclibRootFolders, String& pbstrRedirectUrl, Boolean& pbObjectIsList, Guid& pgListId, UInt32&
pdwItemId, Int64& pllListFlags, Boolean& pbAccessDenied, Guid& pgDocid, Byte& piLevel, UInt64& ppermMask, Object& pvarBuildDependencySet, UInt32& pdwNumBuildDependencies, Object& pvarBuildDependencies, String& pbstrFolderUrl,
String& pbstrContentTypeOrder, Guid& pgDocScopeId) at Microsoft.SharePoint.SPWeb.GetWebPartPageContent(Uri pageUrl, Int32 pageVersion, PageView requestedView, HttpContext context, Boolean forRender, Boolean includeHidden, Boolean mainFileRequest,
Boolean fetchDependencyInformation, Boolean& ghostedPage, String& siteRoot, Guid& siteId, Int64& bytes, ...
9ac4009d-b5ca-c010-44e2-238aad763833
Line 3883: 04/27/2015 02:02:15.80*
w3wp.exe (0x1708)
0x15E0
SharePoint Foundation Files
ak8dj High
...Guid& docId, UInt32& docVersion, String& timeLastModified, Byte& level, Object& buildDependencySetData, UInt32& dependencyCount, Object& buildDependencies, SPWebPartCollectionInitialState& initialState, Object&
oMultipleMeetingDoclibRootFolders, String& redirectUrl, Boolean& ObjectIsList, Guid& listId) at Microsoft.SharePoint.ApplicationRuntime.SPRequestModuleData.FetchWebPartPageInformationForInit(HttpContext context, SPWeb spweb, Boolean
mainFileRequest, String path, Boolean impersonate, Boolean& isAppWeb, Boolean& fGhostedPage, Guid& docId, UInt32& docVersion, String& timeLastModified, SPFileLevel& spLevel, String& masterPageUrl, String& customMasterPageUrl,
String& webUrl, String& siteUrl, Guid& siteId, Object& buildDependencySetData, SPWebPartCollectionInitialState& initialState, ...
9ac4009d-b5ca-c010-44e2-238aad763833
Line 3884: 04/27/2015 02:02:15.80*
w3wp.exe (0x1708)
0x15E0
SharePoint Foundation Files
ak8dj High
...String& siteRoot, String& redirectUrl, Object& oMultipleMeetingDoclibRootFolders, Boolean& objectIsList, Guid& listId, Int64& bytes) at Microsoft.SharePoint.ApplicationRuntime.SPRequestModuleData.GetWebPartPageData(HttpContext
context, String path, Boolean throwIfFileNotFound) at Microsoft.SharePoint.ApplicationRuntime.SPVirtualPathProvider.GetCacheKey(String virtualPath) at System.Web.Compilation.BuildManager.GetVPathBuildResultFromCacheInternal(VirtualPath
virtualPath, Boolean ensureIsUpToDate) at System.Web.Compilation.BuildManager.GetVPathBuildResultInternal(VirtualPath virtualPath, Boolean noBuild, Boolean allowCrossApp, Boolean allowBuildInPrecompile, Boolean throwIfNotFound, Boolean ensureIsUpToDate)
at System.Web.Compilation.BuildManager.GetVPathBuildResultWithN...
9ac4009d-b5ca-c010-44e2-238aad763833
Line 3885: 04/27/2015 02:02:15.80*
w3wp.exe (0x1708)
0x15E0
SharePoint Foundation Files
ak8dj High
...oAssert(HttpContext context, VirtualPath virtualPath, Boolean noBuild, Boolean allowCrossApp, Boolean allowBuildInPrecompile, Boolean throwIfNotFound, Boolean ensureIsUpToDate) at System.Web.Compilation.BuildManager.GetVPathBuildResult(HttpContext
context, VirtualPath virtualPath, Boolean noBuild, Boolean allowCrossApp, Boolean allowBuildInPrecompile, Boolean ensureIsUpToDate) at System.Web.UI.MasterPage.CreateMaster(TemplateControl owner, HttpContext context, VirtualPath masterPageFile,
IDictionary contentTemplateCollection) at System.Web.UI.Page.ApplyMasterPage() at System.Web.UI.Page.PerformPreInit() at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
at System.Web.UI.Page.ProcessRequest(Boolean in...
9ac4009d-b5ca-c010-44e2-238aad763833
Line 3886: 04/27/2015 02:02:15.80*
w3wp.exe (0x1708)
0x15E0
SharePoint Foundation Files
ak8dj High
...cludeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) at System.Web.UI.Page.ProcessRequest() at System.Web.UI.Page.ProcessRequest(HttpContext context) at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) at System.Web.HttpApplication.PipelineStepManager.ResumeSteps(Exception error) at System.Web.HttpApplication.BeginProcessRequestNotification(HttpContext
context, AsyncCallback cb) at System.Web.HttpRuntime.ProcessRequestNotificationPrivate(IIS7WorkerRequest wr, HttpContext context) at System.Web.Hosting.PipelineRuntime.ProcessRequestNotificationHelper(IntPtr rootedObjectsPointer,
IntPtr nativeReque... 9ac4009d-b5ca-c010-44e2-238aad763833
Line 3887: 04/27/2015 02:02:15.80*
w3wp.exe (0x1708)
0x15E0
SharePoint Foundation Files
ak8dj High
...stContext, IntPtr moduleData, Int32 flags) at System.Web.Hosting.PipelineRuntime.ProcessRequestNotification(IntPtr rootedObjectsPointer, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags) at System.Web.Hosting.UnsafeIISMethods.MgdIndicateCompletion(IntPtr
pHandler, RequestNotificationStatus& notificationStatus) at System.Web.Hosting.UnsafeIISMethods.MgdIndicateCompletion(IntPtr pHandler, RequestNotificationStatus& notificationStatus) at System.Web.Hosting.PipelineRuntime.ProcessRequestNotificationHelper(IntPtr
rootedObjectsPointer, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags) at System.Web.Hosting.PipelineRuntime.ProcessRequestNotification(IntPtr rootedObjectsPointer, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags)
9ac4009d-b5ca-c010-44e2-238aad763833
Line 3888: 04/27/2015 02:02:15.80
w3wp.exe (0x1708)
0x15E0
SharePoint Foundation Files
aiv4w Medium
Spent 0 ms to bind 44035 byte file stream
9ac4009d-b5ca-c010-44e2-238aad763833
Line 3889: 04/27/2015 02:02:15.86
w3wp.exe (0x1708)
0x15E0
0x119005
adjzs High
[Forced due to logging gap, cached @ 04/27/2015 02:02:15.83, Original Level: VerboseEx] SwitchableSiteMapProvider "{0}" mapped to target provider "{1}"
9ac4009d-b5ca-c010-44e2-238aad763833
Line 3890: 04/27/2015 02:02:15.86
w3wp.exe (0x1708)
0x15E0
SharePoint Foundation Database
8acb High
[Forced due to logging gap, Original Level: VerboseEx] Reverting to process identity
9ac4009d-b5ca-c010-44e2-238aad763833
Line 3891: 04/27/2015 02:02:15.92
w3wp.exe (0x1708)
0x15E0
SharePoint Foundation Database
ahjqp High
[Forced due to logging gap, cached @ 04/27/2015 02:02:15.91, Original Level: Verbose] SQL connection time: 0.0963 for Data Source=SPDBTE800-001\MYNET_SQL;Initial Catalog=WSS_Content_80;Integrated Security=True;Enlist=False;Pooling=True;Min Pool Size=0;Max
Pool Size=100;Connect Timeout=15;Application Name=SharePoint[w3wp][2][WSS_Content_80]
9ac4009d-b5ca-c010-44e2-238aad763833
Line 3892: 04/27/2015 02:02:15.92
w3wp.exe (0x1708)
0x15E0
SharePoint Foundation Monitoring
b4ly High
Leaving Monitored Scope (EnsureListItemsData). Execution Time=15.9063
9ac4009d-b5ca-c010-44e2-238aad763833
Line 3893: 04/27/2015 02:02:15.98
w3wp.exe (0x1708)
0x15E0
SharePoint Foundation Database
ahjqp High
[Forced due to logging gap, cached @ 04/27/2015 02:02:15.92, Original Level: Verbose] SQL connection time: 0.0662 for Data Source=SPDBTE800-001\MYNET_SQL;Initial Catalog=WSS_Content_80;Integrated Security=True;Enlist=False;Pooling=True;Min Pool Size=0;Max
Pool Size=100;Connect Timeout=15;Application Name=SharePoint[w3wp][2][WSS_Content_80]
9ac4009d-b5ca-c010-44e2-238aad763833
Line 3894: 04/27/2015 02:02:15.98
w3wp.exe (0x1708)
0x15E0
SharePoint Foundation Database
8acb High
[Forced due to logging gap, Original Level: VerboseEx] Reverting to process identity
9ac4009d-b5ca-c010-44e2-238aad763833
Line 3895: 04/27/2015 02:02:16.05
w3wp.exe (0x1708)
0x15E0
SharePoint Foundation Database
ahjqp High
[Forced due to logging gap, cached @ 04/27/2015 02:02:16.03, Original Level: Verbose] SQL connection time: 0.0856 for Data Source=SPDBTE800-001\MYNET_SQL;Initial Catalog=WSS_Content_80;Integrated Security=True;Enlist=False;Pooling=True;Min Pool Size=0;Max
Pool Size=100;Connect Timeout=15;Application Name=SharePoint[w3wp][2][WSS_Content_80]
9ac4009d-b5ca-c010-44e2-238aad763833
Line 3896: 04/27/2015 02:02:16.05
w3wp.exe (0x1708)
0x15E0
SharePoint Foundation Database
8acb High
[Forced due to logging gap, Original Level: VerboseEx] Reverting to process identity
9ac4009d-b5ca-c010-44e2-238aad763833
Line 3897: 04/27/2015 02:02:16.05
w3wp.exe (0x1708)
0x15E0
SharePoint Foundation Monitoring
b4ly High
Leaving Monitored Scope (EnsureListItemsData). Execution Time=20.7631
9ac4009d-b5ca-c010-44e2-238aad763833
Line 3901: 04/27/2015 02:02:16.19
w3wp.exe (0x1708)
0x15E0
0xC33B01F
ahv8s High
[Forced due to logging gap, cached @ 04/27/2015 02:02:16.06, Original Level: Verbose] Ending StoreWorkflowDeploymentProvider.GetDefinition
9ac4009d-b5ca-c010-44e2-238aad763833
Line 3902: 04/27/2015 02:02:16.19
w3wp.exe (0x1708)
0x15E0
SharePoint Foundation Database
8acb High
[Forced due to logging gap, Original Level: VerboseEx] Reverting to process identity
9ac4009d-b5ca-c010-44e2-238aad763833
Line 3903: 04/27/2015 02:02:16.23
w3wp.exe (0x1708)
0x15E0
SharePoint Foundation General
8kh7 High
Cannot complete this action. Please try again.
9ac4009d-b5ca-c010-44e2-238aad763833
Line 3904: 04/27/2015 02:02:16.25
w3wp.exe (0x1708)
0x15E0
SharePoint Foundation Database
ahjqp High
[Forced due to logging gap, cached @ 04/27/2015 02:02:16.20, Original Level: Verbose] SQL connection time: 0.0671 for Data Source=SPDBTE800-001\MYNET_SQL;Initial Catalog=WSS_Content_80;Integrated Security=True;Enlist=False;Pooling=True;Min Pool Size=0;Max
Pool Size=100;Connect Timeout=15;Application Name=SharePoint[w3wp][2][WSS_Content_80]
9ac4009d-b5ca-c010-44e2-238aad763833
Line 3905: 04/27/2015 02:02:16.25
w3wp.exe (0x1708)
0x15E0
SharePoint Foundation General
aix9j High
SPRequest.UpdateField: UserPrincipalName=i:0).w|s-1-5-21-515020923-1814085151-1527837076-26682, AppPrincipalName= ,bstrUrl=http://spwfte800-001 ,bstrListName={0B6B6303-D8AC-4007-94D0-5CF5502DF0F6} ,bstrXML=<Field DisplayName="PublishNewsItemWF-ItemAdded"
Type="URL" Required="FALSE" ID="{36f69f6b-98df-44f7-b0bd-041265b4b402}" SourceID="{0b6b6303-d8ac-4007-94d0-5cf5502df0f6}" StaticName="PublishNewsItemWF_x002d_ItemAdde" Name="PublishNewsItemWF_x002d_ItemAdde"
ColName="nvarchar22" RowOrdinal="0" ColName
9ac4009d-b5ca-c010-44e2-238aad763833
Line 3906: 04/27/2015 02:02:16.25
w3wp.exe (0x1708)
0x15E0
SharePoint Foundation General
ai1wu Medium
System.Runtime.InteropServices.COMException: Cannot complete this action. Please try again., StackTrace: at Microsoft.SharePoint.SPField.UpdateCore(Boolean bToggleSealed) at Microsoft.SharePoint.SPFieldCollection.AddFieldAsXmlInternal(String
schemaXml, Boolean addToDefaultView, SPAddFieldOptions op, Boolean isMigration, Boolean fResetCTCol) at Microsoft.SharePoint.SPFieldCollection.AddInternal(String strDisplayName, SPFieldType type, Boolean bRequired, Boolean bCompactName, Guid
lookupListId, Guid lookupWebId, StringCollection choices) at Microsoft.SharePoint.SPFieldCollection.Add(String strDisplayName, SPFieldType type, Boolean bRequired, Boolean bCompactName, StringCollection choices) at Microsoft.SharePoint.SPFieldCollection.Add(String
strDisplayName, SPFieldType typ... 9ac4009d-b5ca-c010-44e2-238aad763833
Line 3907: 04/27/2015 02:02:16.25*
w3wp.exe (0x1708)
0x15E0
SharePoint Foundation General
ai1wu Medium
...e, Boolean bRequired) at Microsoft.SharePoint.WorkflowServices.StoreSubscriptionService.CreateStatusColumn(String subscriptionName, SPWeb web, Guid listId) at Microsoft.SharePoint.WorkflowServices.StoreSubscriptionService.PublishSubscriptionForList(WorkflowSubscription
subscription, Guid listId) at Microsoft.SharePoint.WorkflowServices.ApplicationPages.AssocWrkflPage.OnLoad(EventArgs ea) at System.Web.UI.Control.LoadRecursive() at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint,
Boolean includeStagesAfterAsyncPoint) at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) at System.Web.UI.Page.ProcessRequest() at System.Web.UI.Page.ProcessRequest(HttpContext
context) at ... 9ac4009d-b5ca-c010-44e2-238aad763833
Line 3908: 04/27/2015 02:02:16.25*
w3wp.exe (0x1708)
0x15E0
SharePoint Foundation General
ai1wu Medium
...System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) at System.Web.HttpApplication.PipelineStepManager.ResumeSteps(Exception
error) at System.Web.HttpApplication.BeginProcessRequestNotification(HttpContext context, AsyncCallback cb) at System.Web.HttpRuntime.ProcessRequestNotificationPrivate(IIS7WorkerRequest wr, HttpContext context) at
System.Web.Hosting.PipelineRuntime.ProcessRequestNotificationHelper(IntPtr rootedObjectsPointer, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags) at System.Web.Hosting.PipelineRuntime.ProcessRequestNotification(IntPtr rootedObjectsPointer,
IntPtr nativeRequestContext, IntPtr mo... 9ac4009d-b5ca-c010-44e2-238aad763833
Line 3909: 04/27/2015 02:02:16.25*
w3wp.exe (0x1708)
0x15E0
SharePoint Foundation General
ai1wu Medium
...duleData, Int32 flags) at System.Web.Hosting.UnsafeIISMethods.MgdIndicateCompletion(IntPtr pHandler, RequestNotificationStatus& notificationStatus) at System.Web.Hosting.UnsafeIISMethods.MgdIndicateCompletion(IntPtr
pHandler, RequestNotificationStatus& notificationStatus) at System.Web.Hosting.PipelineRuntime.ProcessRequestNotificationHelper(IntPtr rootedObjectsPointer, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags) at System.Web.Hosting.PipelineRuntime.ProcessRequestNotification(IntPtr
rootedObjectsPointer, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags)
9ac4009d-b5ca-c010-44e2-238aad763833
Line 3910: 04/27/2015 02:02:16.25
w3wp.exe (0x1708)
0x15E0
SharePoint Foundation General
8nca Medium
Application error when access /_layouts/15/AssocWrkfl.aspx, Error=Unable to properly communicate with the workflow service. at Microsoft.SharePoint.WorkflowServices.ApplicationPages.AssocWrkflPage.OnLoad(EventArgs ea) at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
9ac4009d-b5ca-c010-44e2-238aad763833
Line 3911: 04/27/2015 02:02:16.25
w3wp.exe (0x1708)
0x15E0
SharePoint Foundation Runtime
tkau Unexpected
Microsoft.SharePoint.SPException: Unable to properly communicate with the workflow service. at Microsoft.SharePoint.WorkflowServices.ApplicationPages.AssocWrkflPage.OnLoad(EventArgs ea) at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
9ac4009d-b5ca-c010-44e2-238aad763833
Line 3912: 04/27/2015 02:02:16.25
w3wp.exe (0x1708)
0x15E0
SharePoint Foundation General
ajlz0 High
Getting Error Message for Exception System.Web.HttpUnhandledException (0x80004005): Exception of type 'System.Web.HttpUnhandledException' was thrown. ---> Microsoft.SharePoint.SPException: Unable to properly communicate with the workflow service.
at Microsoft.SharePoint.WorkflowServices.ApplicationPages.AssocWrkflPage.OnLoad(EventArgs ea) at System.Web.UI.Control.LoadRecursive() at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint,
Boolean includeStagesAfterAsyncPoint) at System.Web.UI.Page.HandleError(Exception e) at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) at System.Web.UI.Page.ProcessRequest(Boolean
includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoin...
9ac4009d-b5ca-c010-44e2-238aad763833
Line 3913: 04/27/2015 02:02:16.25*
w3wp.exe (0x1708)
0x15E0
SharePoint Foundation General
ajlz0 High
...t) at System.Web.UI.Page.ProcessRequest() at System.Web.UI.Page.ProcessRequest(HttpContext context) at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
9ac4009d-b5ca-c010-44e2-238aad763833
Line 3914: 04/27/2015 02:02:16.25
w3wp.exe (0x1708)
0x15E0
SharePoint Foundation General
aat87 Monitorable
9ac4009d-b5ca-c010-44e2-238aad763833
Line 3915: 04/27/2015 02:02:16.28
w3wp.exe (0x1708)
0x15E0
SharePoint Foundation DistributedCache
agyfq Medium
Unexpected error occurred in method 'Put' , usage 'SPViewStateCache' - Exception 'Microsoft.ApplicationServer.Caching.DataCacheException: ErrorCode<ERRCA0017>:SubStatus<ES0006>:There is a temporary failure. Please retry later. (One or more
specified cache servers are unavailable, which could be caused by busy network or servers. For on-premises cache clusters, also verify the following conditions. Ensure that security permission has been granted for this client account, and check that the AppFabric
Caching Service is allowed through the firewall on all cache hosts. Also the MaxBufferSize on the server must be greater than or equal to the serialized object size sent from the client.) ---> System.ServiceModel.CommunicationException: The socket connection
was aborted. This could be caused by ... 9ac4009d-b5ca-c010-44e2-238aad763833
Line 3916: 04/27/2015 02:02:16.28*
w3wp.exe (0x1708)
0x15E0
SharePoint Foundation DistributedCache
agyfq Medium
...an error processing your message or a receive timeout being exceeded by the remote host, or an underlying network resource issue. Local socket timeout was '10675199.02:48:05.4775807'. ---> System.IO.IOException: The read operation failed, see inner
exception. ---> System.ServiceModel.CommunicationException: The socket connection was aborted. This could be caused by an error processing your message or a receive timeout being exceeded by the remote host, or an underlying network resource issue. Local
socket timeout was '10675199.02:48:05.4775807'. ---> System.Net.Sockets.SocketException: An existing connection was forcibly closed by the remote host at System.Net.Sockets.Socket.Receive(Byte[] buffer, Int32 offset, Int32 size, SocketFlags
socketFlags) at System.ServiceModel.Channels.So...
9ac4009d-b5ca-c010-44e2-238aad763833
Line 3917: 04/27/2015 02:02:16.28*
w3wp.exe (0x1708)
0x15E0
SharePoint Foundation DistributedCache
agyfq Medium
...cketConnection.ReadCore(Byte[] buffer, Int32 offset, Int32 size, TimeSpan timeout, Boolean closing) --- End of inner exception stack trace --- at System.ServiceModel.Channels.SocketConnection.ReadCore(Byte[] buffer, Int32
offset, Int32 size, TimeSpan timeout, Boolean closing) at System.ServiceModel.Channels.SocketConnection.Read(Byte[] buffer, Int32 offset, Int32 size, TimeSpan timeout) at System.ServiceModel.Channels.ConnectionStream.Read(Byte[]
buffer, Int32 offset, Int32 count) at System.Net.FixedSizeReader.ReadPacket(Byte[] buffer, Int32 offset, Int32 count) at System.Net.Security.NegotiateStream.StartFrameHeader(Byte[] buffer, Int32 offset, Int32 count, AsyncProtocolRequest
asyncRequest) at System.Net.Security.NegotiateStream.StartReading(Byte[] buffer, Int...
9ac4009d-b5ca-c010-44e2-238aad763833
Line 3918: 04/27/2015 02:02:16.28*
w3wp.exe (0x1708)
0x15E0
SharePoint Foundation DistributedCache
agyfq Medium
...32 offset, Int32 count, AsyncProtocolRequest asyncRequest) at System.Net.Security.NegotiateStream.ProcessRead(Byte[] buffer, Int32 offset, Int32 count, AsyncProtocolRequest asyncRequest) --- End of inner exception stack
trace --- at System.Net.Security.NegotiateStream.ProcessRead(Byte[] buffer, Int32 offset, Int32 count, AsyncProtocolRequest asyncRequest) at System.Net.Security.NegotiateStream.Read(Byte[] buffer, Int32 offset, Int32 count)
at System.ServiceModel.Channels.StreamConnection.Read(Byte[] buffer, Int32 offset, Int32 size, TimeSpan timeout) --- End of inner exception stack trace --- Server stack trace: at System.ServiceModel.Channels.StreamConnection.Read(Byte[]
buffer, Int32 offset, Int32 size, TimeSpan timeout) at System.ServiceModel.Channels...
9ac4009d-b5ca-c010-44e2-238aad763833
Line 3919: 04/27/2015 02:02:16.28*
w3wp.exe (0x1708)
0x15E0
SharePoint Foundation DistributedCache
agyfq Medium
....ClientFramingDuplexSessionChannel.SendPreamble(IConnection connection, ArraySegment`1 preamble, TimeoutHelper& timeoutHelper) at System.ServiceModel.Channels.ClientFramingDuplexSessionChannel.DuplexConnectionPoolHelper.AcceptPooledConnection(IConnection
connection, TimeoutHelper& timeoutHelper) at System.ServiceModel.Channels.ConnectionPoolHelper.EstablishConnection(TimeSpan timeout) at System.ServiceModel.Channels.ClientFramingDuplexSessionChannel.OnOpen(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout) at Microsoft.ApplicationServer.Caching.CacheResolverChannel.Open(TimeSpan timeout) at System.Runtime.Remoting.Messaging.StackBuilderSink._PrivateProcessMessage(IntPtr
md, Object[] args, Object server, Object[]& outArgs) ...
9ac4009d-b5ca-c010-44e2-238aad763833
Line 3920: 04/27/2015 02:02:16.28*
w3wp.exe (0x1708)
0x15E0
SharePoint Foundation DistributedCache
agyfq Medium
... at System.Runtime.Remoting.Messaging.StackBuilderSink.AsyncProcessMessage(IMessage msg, IMessageSink replySink) Exception rethrown at [0]: at System.Runtime.Remoting.Proxies.RealProxy.EndInvokeHelper(Message
reqMsg, Boolean bProxyCase) at System.Runtime.Remoting.Proxies.RemotingProxy.Invoke(Object NotUsed, MessageData& msgData) at Microsoft.ApplicationServer.Caching.CacheResolverChannel.OpenDelegate.EndInvoke(IAsyncResult result)
at Microsoft.ApplicationServer.Caching.ChannelContainer.Opened(IAsyncResult ar) --- End of inner exception stack trace --- at Microsoft.ApplicationServer.Caching.DataCache.ThrowException(ResponseBody respBody, RequestBody
reqBody) at Microsoft.ApplicationServer.Caching.DataCache.InternalPut(String key, Object value, DataCacheItemV...
9ac4009d-b5ca-c010-44e2-238aad763833
Line 3921: 04/27/2015 02:02:16.28*
w3wp.exe (0x1708)
0x15E0
SharePoint Foundation DistributedCache
agyfq Medium
...ersion oldVersion, TimeSpan timeout, DataCacheTag[] tags, String region, IMonitoringListener listener) at Microsoft.ApplicationServer.Caching.DataCache.<>c__DisplayClass25.<Put>b__24() at Microsoft.ApplicationServer.Caching.DataCache.Put(String
key, Object value, TimeSpan timeout) at Microsoft.SharePoint.DistributedCaching.SPDistributedCache.Put(String key, Object value)'.
9ac4009d-b5ca-c010-44e2-238aad763833
Line 3922: 04/27/2015 02:02:16.28
w3wp.exe (0x1708)
0x15E0
SharePoint Foundation General
ajb4s Monitorable
ViewStateLog: Failed to write to the velocity cache: http://spwfte800-001/_layouts/15/AssocWrkfl.aspx?AssociatedList=0b6b6303-d8ac-4007-94d0-5cf5502df0f6&WF4=1
9ac4009d-b5ca-c010-44e2-238aad763833
Line 3923: 04/27/2015 02:02:16.28
w3wp.exe (0x1708)
0x15E0
SharePoint Foundation Micro Trace
uls4 Medium
Micro Trace Tags: 0 nasq,4 agb9s,66 ak8dj,123 b4ly,132 b4ly,198 aix9j,1 ai1wu,6 8nca,0 tkau,0 ajlz0,1 aat87,20 agyfq,0 ajb4s
9ac4009d-b5ca-c010-44e2-238aad763833
Line 3924: 04/27/2015 02:02:16.28
w3wp.exe (0x1708)
0x15E0
SharePoint Foundation Monitoring
b4ly Medium
Leaving Monitored Scope (Request (POST:http://spwfte800-001:80/_layouts/15/AssocWrkfl.aspx?AssociatedList=0b6b6303-d8ac-4007-94d0-5cf5502df0f6&WF4=1)). Execution Time=560.4965
9ac4009d-b5ca-c010-44e2-238aad763833

Hi Amit,
Please try using the below cmdlet format to register workflow service to your SharePoint QA server again per the following post with similar error, then check results again.
Register-SPWorkflowService -SPSite 'https://myhost/mysite' -WorkflowHostUri 'https://workflowhost' -AllowOAuthHttp -Force
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/46a868eb-a012-4148-8319-088d55671ae7/errors-were-found-when-compiling-the-workflow-the-workflow-files-were-saved-but-cannot-run?forum=sharepointadminprevious
Thanks
Daniel Yang
TechNet Community Support

Unable to create rule Error:Function Module does not meet the workflow conv

Hi Workflow experts,
Could any one help me with rule creation. Below is my Function Module Interface.
""Local Interface:
*" TABLES
*"      AC_CONTAINER STRUCTURE SWCONT OPTIONAL
*"      ACTOR_TAB STRUCTURE SWHACTOR OPTIONAL
*" EXCEPTIONS
*"      NOBODY_FOUND
The function module test is successful with all required conventions for workflow but while i try to create a rule with the funtion module i get the error "Function Module does not meet the workflow conventions"
I Also have included the following in FM
INCLUDE <cntn01>.
Any suggestions would be helpful. Thanks in Advance,
Imran

Hi,
I am not sure whether the rule accepts the optional flag. Remove the optional flag for the tables parameters and try again. According to the documentation you have implemented the right interface. It might be the issue with the tables parameter being optional.
Hope this helps,
Sudhi

Something went wrong. To try again, reload the page and then start the workflow

We have a SP 2013 farm with Aug 2013 CU. While trying to start an SPD 2013 platform workflow from browser I get an error "Something went wrong. To try again, reload the page and then start the workflow."
I could also see the following in ULS:
System.NotSupportedException: Not supported in Windows authentication mode.
at Microsoft.SharePoint.IdentityModel.SPIdentityContext.Create(SPUserToken token, Boolean
isShareByLinkGuestUser)
at Microsoft.SharePoint.WorkflowServices.WorkflowServiceContextExtensions.GetApplicationUserCredentials
(WorkflowServicesContext context) StackTrace:
at Microsoft.Office.Server.Native.dll: (sig=35339f9c-8871-4ef1-9118-9c1bd0cb6598|2|
microsoft.office.server.native.pdb, offset=131CE)
at Microsoft.Office.Server.Native.dll
This seems to be a bug and is solved in Mar 2013 PU but I have Aug CU. The web where I have this workflow has classic mode auth. Has anyone come across this error before?
I have checked the following:
1. Service
Bus Gateway and Service
Bus Manager Broker services are started
2. Authentication for this web application is Windows NTLM
-- The opinions expressed here represent my own and not those of anybody else -- http://manojvnair.blogspot.com

Thank you for the steps.
I have checked User Profile service and it is started and running fine. The user who is trying to start the workflow (me) has a profile created. I'm not starting wf as system account and my account is not added to web application user policy. Workflow isn't
even firing when I try to edit list item.
I tried to edit the list item as system account and workflow started this time. But it does to suspended state with the following message:
RequestorId: 54f4a912-ab0b-a1f2-0000-000000000000. Details: RequestorId: 54f4a912-ab0b-a1f2-0000-000000000000. Details: An unhandled exception occurred during the execution of the workflow instance. Exception details: System.ApplicationException: HTTP 401
{"SPRequestGuid":["54f4a912-ab0b-a1f2-be58-305dd8b6eab4"],"request-id":["54f4a912-ab0b-a1f2-be58-305dd8b6eab4"],"X-FRAME-OPTIONS":["SAMEORIGIN"],"SPRequestDuration":["2"],"SPIisLatency":["1"],"MicrosoftSharePointTeamServices":["15.0.0.4535"],"X-Content-Type-Options":["nosniff"],"X-MS-InvokeApp":["1;
RequireReadOnly"],"Date":["Thu, 24 Apr 2014 15:32:05 GMT"],"Server":["Microsoft-IIS\/8.0"],"WWW-Authenticate":["NTLM"],"X-Powered-By":["ASP.NET"]} at Microsoft.Activities.Hosting.Runtime.Subroutine.SubroutineChild.Execute(CodeActivityContext context) at System.Activities.CodeActivity.InternalExecute(ActivityInstance
instance, ActivityExecutor executor, BookmarkManager bookmarkManager) at System.Activities.Runtime.ActivityExecutor.ExecuteActivityWorkItem.ExecuteBody(ActivityExecutor executor, BookmarkManager bookmarkManager, Location resultLocation)
WhenI try to start wf I can see the first error:
System.NotSupportedException: Not supported in Windows authentication mode.
at Microsoft.SharePoint.IdentityModel.SPIdentityContext.Create(SPUserToken token, Boolean isShareByLinkGuestUser)
at Microsoft.SharePoint.WorkflowServices.WorkflowServiceContextExtensions.GetApplicationUserCredentials(WorkflowServicesContext context) StackTrace:
at Microsoft.Office.Server.Native.dll: (sig=35339f9c-8871-4ef1-9118-9c1bd0cb6598|2|microsoft.office.server.native.pdb, offset=131CE)
at Microsoft.Office.Server.Native.dll: (offset=21B4D
-- The opinions expressed here represent my own and not those of anybody else -- http://manojvnair.blogspot.com

You don't have the authorization to start the workflow

hi,
We are working on integration of ESS with EP.
From EP when we sent leave request, We are geting an error
"You don't have the authorization to start the workflow".
Can anyone help us on this?
Thank you very much in advance.
regards,
Uttam.

Hi Linc,
Thanks for replying so quickly.
I actually figured out what was wrong and I feel so foolish not for looking here first. But the folders themselves were not locked, it was each individual song that was. So all I did was open up the folder and the following sub-folders to reveal the songs. I then would right click on each song > get info > and then the locked button at the top would be highlighted in blue. All I had to do was click the button, and poof the song was unlocked and subsequently the entire folder was unlocked, then I could delete the whole thing. I had to do this about 150 times for each song hahaha but it all worked out.
Thanks again for your time

Error in Forms while creating the trigger- WHEN-CREATE-RECORD

Hello,
Right now I am using 11g client side and 10g database.
I am constantly getting an error while creating triggers in 11g.
I have created a sequence in SQL developer using the following code:
create sequence loc_id_sequence
start with 14;
After creating the sequence. I am trying to write the PL/SQL code in forms builder for the trigger WHEN-CREATE-RECORD
declare
loc_id number;
begin
loc_id := loc_id_sequence.nextval;
end;
But I have been getting the following error constantly. Can anyone please help me?
"Error 0 at line 5, column 4
SQL statement ignored".
Can anyone please tell me why I am getting that error

In fact, even I thought there might be some problem with the connectivity with the 10g database and 11g client but the other DB related code works.
I just have the problem with using sequence for the trigger WHEN-CREATE-RECORD.
In fact I also tried using WHEN-NEW-RECORD-INSTANCE smart trigger instead of WHEN-CREATE-RECORD for the same sequence. But even that doesn't work.
Do u have any idea of what that error means?
"Error 0 at line 5, column 4
SQL statement ignored"
Edited by: Pooja 1985 on Feb 26, 2013 5:43 PM
Edited by: Pooja 1985 on Feb 26, 2013 5:44 PM

Error while generating CW kin for the new BG created for Taiwan

HiAll,
Please provide your help to resolve this issue,
Iam getting error while generating CW kin for the new BG created for Taiwan, China.
Error : Value TW is not a Valid context for the Descriptive Flexfield Person Developer DF.
Please let me know, is there any step missed to create CW kins for new BG's.
Thanks-
Sowmya.
Edited by: user13419037 on Jul 2, 2012 3:41 AM

Hello ,
Your solution can be solved by enabling the displayed check Box in Location Address DFF
Thanks
Bindu

Set the Object Key while starting the Workflow

Hi Experts,
I am trigerring a workflow using the fm "SAP_WAPI_START_WORKFLOW". I am using a custom business object for my workflow
and would like to know how we can set the object-key(i.e key attribute) for this business object at the start of the workflow so that it can be used in the various tasks of the workflow.
Thanks in Advance,
Chaitanya.

Hello,
Please search this forum for SAP_WAPI_START_WORKFLOW and you'll see how it's done.
Basically:
lv_object_instance-objtype = 'FORMABSENC'.
lv_object_instance-objkey = '0000000088'.
lt_wf_cont-element = 'ABSENCEFORM'.
lt_wf_cont-value = lv_object_instance.
append lt_wf_cont.
CALL FUNCTION 'SAP_WAPI_START_WORKFLOW'
TABLES
INPUT_CONTAINER = lt_wf_cont
Note that it's advised to use events instead of starting the workflow directly like this, if possible.
regards
Rick Bakker
Hanabi Technology

How to start a workflow when a value in specific column is changed?

HI !!
I would like that my workflow will run only if a value on a specific colunm will change.
is there a way to do it without using a third colunm ?
thank you !
nikita.

Hi,
According to your post, my understanding is that you wanted to start a workflow when a value in specific column is changed.
When you create workflow, if you check the “start the workflow automatically when an item is changed”, the workflow will be started automatically once the item is edited.
In the other word, no matter which column we changed, the the workflow will be started automatically.
As a workaround, we can add condition or action to make the workflow excute the next step only if the value in specific column is changed.
There are two options to achieve it.
Use the “Wait for Field Change in Current Item" action”. If you add the action at the first, the workflow will excute the next step until the column is chaned to the specific value.
2. User the “If any value equals to value” condition. If you add the condition at the first, the workflow will excute the next step if the condition is satisfied.
Thank you for your understanding.
Best Regards,
Linda Li
Linda Li
TechNet Community Support

After update.. i can not start the ipad, when i press agree in the terms ...it will freeze and the screen not working///help please

after update.. i can not start the ipad, when i press agree in the terms ...it will freeze and the screen not working///help please

What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
 Cheers, Tom

How to register the recipient when create job by function

I am now use JOB_OPEN , JOB_SUBMIT and JOB_CLOSE to create a job in the program. And need to post the result of the report to the person by email.
Can you tell me how to register the recipient when create the job.
( in sm36, it is easily to do but how to do in coding? )
regards,
slam

Hi
I think in Back ground using the above fun modules you can't send a mail to the receipient.
see the use of the above fun modules;
IF p_bjob = 'X'.
    CONCATENATE sy-cprog sy-datum sy-uzeit
                INTO jobname SEPARATED BY '_'.
    CALL FUNCTION 'JOB_OPEN'
      EXPORTING
        jobname          = jobname
      IMPORTING
        jobcount         = jobcount
      EXCEPTIONS
        cant_create_job = 1
        invalid_job_data = 2
        jobname_missing = 3
        OTHERS           = 4.
    CALL FUNCTION 'GET_PRINT_PARAMETERS'
      IMPORTING
        out_archive_parameters = arc_params
        out_parameters         = print_params
        valid                  = valid
      EXCEPTIONS
        archive_info_not_found = 1
        invalid_print_params   = 2
        invalid_archive_params = 3
        OTHERS                 = 4.
    IF valid = chk.
      SUBMIT ybrep
                      WITH < sel Screen>
                      AND RETURN
                      USER               sy-uname
                      VIA JOB            jobname
                      NUMBER             jobcount
                      TO SAP-SPOOL
                      SPOOL PARAMETERS   print_params
                      ARCHIVE PARAMETERS arc_params
                      WITHOUT SPOOL DYNPRO.
      CALL FUNCTION 'JOB_CLOSE'
        EXPORTING
          jobcount             = jobcount
          jobname              = jobname
          strtimmed            = 'X'
        EXCEPTIONS
          cant_start_immediate = 1
          invalid_startdate    = 2
          jobname_missing      = 3
          job_close_failed     = 4
          job_nosteps          = 5
          job_notex            = 6
          lock_failed          = 7
          invalid_target       = 8
          OTHERS               = 9.
      IF sy-subrc <> 0.
       MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
               WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      ELSE.
        MESSAGE i029 WITH jobname.
      ENDIF.
    ELSE.
      MESSAGE s000 WITH text-003.
      STOP.
    ENDIF.
ENDIF.
Reward points if useful
Regards
Anji

Error "An error occurred on starting the workflow" when creating Timesheet

Similar Messages

Maybe you are looking for