Error and no disk

my music is lost somewhere in the ipod i can hook it up to any computer and music plays but none showes in pod although capacity is full. i tried to restore it (yes i know music will be lost but i did save it) but all i get is error with 4 numbers and no disk found

Likely a hard drive failure
If a sad iPod icon or an exclamation point and folder icon appears on your iPod’s screen, or with sounds of clicking or HD whirring, it is usually the sign of a hard drive problem and you have the power to do something about it now. Your silver bullet of resolving your iPod issue – is to restore your iPod to factory settings.
http://docs.info.apple.com/article.html?artnum=60983
If you're having trouble, try these steps at different levels one at a time until the issue is resolved. These steps will often whip your iPod back into shape.
Make sure you do all the following “TRYs”
A. Try to wait 30 minutes while iPod is charging.
B. Try another FireWire or USB through Dock Connector cable.
C. Try another FireWire or USB port on your computer .
D. Try to disconnect all devices from your computer's FireWire and USB ports.
E. Try to download and install the latest version of iPod software and iTunes
http://www.apple.com/itunes/download/
For old and other versions of iPod updater for window you can get here
http://www.ipodwizard.net/showthread.php?t=7369
F. Try these five steps (known as the five Rs) and it would conquer most iPod issues.
http://www.apple.com/support/ipod/five_rs/
G. Try to put the iPod into Disk Mode if it fails to appear on the desktop
http://docs.info.apple.com/article.html?artnum=93651
If none of these steps address the issue, you may need to go to Intermediate level listed below in logical order. Check from the top of the lists to see if that is what keeping iPod from appearing on your computer in order for doing the Restore.
Intermediate Level
A. Try to connect your iPod with another computer with the iPod updater pre-installed.
B. Still can’t see your iPod, put it in Disk Mode and connect with a computer, instead of doing a Restore on iPod Updater. Go and format the iPod instead.
For Mac computer
1. Open the disk utility, hope your iPod appears there (left hand side), highlight it
2. Go to Tab “Partition”, click either “Delete” or “Partition”, if fails, skip this step and go to 3
3. Go to Tab “Erase” , choose Volume Format as “MAC OS Extended (Journaled), and click Erase, again if fails, skip it and go to 4
4. Same as step 3, but open the “Security Options....” and choose “Zero Out Data” before click Erase. It will take 1 to 2 hours to complete.
5. Eject your iPod and do a Reset
6. Open the iTunes and click “Restore”
For Window computer
Go to folder “My Computer”
Hope you can see your iPod there and right click on the iPod
Choose “Format”. Ensure the settings are at “Default” and that “Quick Format” is not checked
Now select “Format”
Eject your iPod and do a Reset
Open the iTunes 7 and click “Restore”
In case you do not manage to do a “Format” on a window computer, try to use some 3rd party disk utility software, e.g.“HP USB Disk Storage Format Tool”.
http://discussions.apple.com/thread.jspa?threadID=501330&tstart=0
C. Windows users having trouble with their iPods should locate a Mac user. In many cases when an iPod won't show up on a PC that it will show up on the Mac. Then it can be restored. When the PC user returns to his computer the iPod will be recognized by the PC, reformatted for the PC, and usable again. By the way, it works in reverse too. A Mac user often can get his iPod back by connecting it to a PC and restoring it.
Tips
a. It does not matter whether the format is completed or not, the key is to erase (or partly) the corrupted firmware files on the Hard Drive of the iPod. After that, when the iPod re-connected with a computer, it will be recognized as an fresh external hard drive, it will show up on the iTunes.
b. It is not a difficult issue for a Mac user to find a window base computer, for a PC user, if they can’t find any Mac user, they can go to a nearest Apple Shop for a favor.
c. You may need to switch around the PC and Mac, try to do several attempts between “Format” and “Restore”
http://discussions.apple.com/thread.jspa?messageID=2364921&#2364921
Advance Level
A. Diagnostic mode solution
If you have tried trouble shooting your iPod to no avail after all the steps above, chances are your iPod has a hardware problem. The iPod's built-in Diagnostic Mode is a quick and easy way to determine if you have a "bad" iPod.
You need to restart your iPod before putting it into Diagnostic Mode. Check that your hold switch is off by sliding the switch away from the headphone jack. Toggle it on and off to be safe.
Press and hold the following combination of buttons simultaneously for approximately 10 seconds to reset the iPod.
iPod 1G to 3G: "Menu" and "Play/Pause"
iPod 4G+ (includes Photo, Nano, Video, and Mini): "Menu" and "Select"
The Apple logo will appear and you should feel the hard drive spinning up. Press and hold the following sequence of buttons:
iPod 1G to 3G: "REW", "FFW" and "Select"
iPod 4G+ (includes Photo, Nano, Video, and Mini): "Back" and "Select"
You will hear an audible chirp sound (3G models and higher) and the Apple logo should appear backwards. You are now in Diagnostic Mode. Navigate the list of tests using "REW" and "FFW". The scroll wheel will not function while in diagnostic mode. For further details on Diagnostic mode can be found at http://www.methodshop.com/mp3/ipodsupport/diagnosticmode/
Try to do the 5in1, HDD R/W and HDD scan tests. Some successful cases have been reported after the running the few tests under the Diagnostic mode. In case it does not work in your case, and the scan tests reports show some errors then it proves your iPod has a hardware problem and it needs a repairing service.
B. Format your iPod with a start disk
I have not tried this solution myself, I heard that there were few successful cases that the users managed to get their iPod (you must put your iPod in disk mode before connecting with a computer) mounted by the computer, which was booted by a system startup disk. For Mac, you can use the Disk Utility (on the Tiger OS system disk), for PC user, you can use the window OS system disk. Try to find a way to reformat your iPod, again it does not matter which format (FAT32, NTFS or HFS+) you choose, the key is to erase the corrupted system files on the iPod. Then eject your iPod and do a Reset to switch out from Disk Mode. Reboot your computer at the normal way, connect your iPod back with it, open the iPod updater, and hopefully your iPod will appear there for the Restore.
If none of these steps address the issue, your iPod may need to be repaired.
Consider setting up a mail-in repair for your iPod http://depot.info.apple.com/ipod/
Or visit your local Apple Retail Store http://www.apple.com/retail/
In case your iPod is no longer covered by the warranty and you want to find a second repairing company, you can try iPodResQ or ifixit at your own risk
http://www.ipodresq.com/index.php
http://www.ifixit.com/
Just in case that you are at the following situation
Your iPod warranty is expired
You don’t want to pay any service charges
You are prepared to buy a new one
You can’t accept the re-sell value of your broken iPod
Rather than leave your iPod as paper-weight or throw it away.
You can try the following, but again, only do it as your last resort and at your own risk.
Warning !!!! – It may or may not manage to solve your problem, and with a risk that you may further damage your iPod, which end up as an expensive paper weight or you need to pay more higher repairing cost. Therefore, please re-consider again whether you want to try the next level
Last Resort Level
1. . Disconnecting the Hard Drive and battery inside the iPod – Warning !! Your iPod warranty will be waived once you open the iPod.
In Hong Kong there are some electronic shops offering an iPod service for Sad iPod, the first thing they do is to open up the iPod’s case and disconnecting the battery and the Hard Drive from the main board of the iPod. Wait for 5-10 minutes and reconnecting them back. The reason behind which I can think of is to do a fully reset of a processor of the iPod. In case you want do it itself and you believe that you are good on fixing the electronics devices and have experience to deal with small bits of electronic parts, then you can read the following of how to open the iPod case for battery and HDD replacement (with Quicktimes)
http://eshop.macsales.com/tech_center/index.cfm?page=Video/directory.html
2.Press the reset button on the Hard Drive inside the iPod – Suggestion from Kill8joy
http://discussions.apple.com/thread.jspa?messageID=2438774#2438774
Have I tried these myself? No, I am afraid to do it myself as I am squeamish about tinkering inside electronic devices, I have few experiences that either I broke the parts (which are normally tiny or fragile) or failed to put the parts back to the main case. Therefore, I agree with suggestion to have it fixed by a Pro.
2. Do a search on Google and some topics on this discussion forum about “Sad iPod”
Exclamation point and folder and nothing else
Spank your iPod
http://www.youtube.com/watch?v=3ljPhrFUaOY
http://discussions.apple.com/thread.jspa?messageID=3597173#3597173
Exclamation point and folder and nothing else
http://discussions.apple.com/thread.jspa?messageID=2831962#2831962
What should I do with my iPod? Send it or keep it?
http://discussions.apple.com/thread.jspa?threadID=469080&tstart=0
Strange error on iPod (probably death)
http://discussions.apple.com/thread.jspa?threadID=435160&start=0&tstart=0
Sad Face on iPod for no apparent reason
http://discussions.apple.com/thread.jspa?threadID=336342&start=0&tstart=0
Meeting the Sad iPod icon
http://askpang.typepad.com/relevanthistory/2004/11/meeting_thesad.html#comment-10519524
Sad faced iPod, but my computer won’t recognize it?
http://discussions.apple.com/thread.jspa?messageID=2236095#2236095
iPod Photo: unhappy icon + warranty question
http://discussions.apple.com/thread.jspa?messageID=2233746#2233746
4th Gen iPod Users - are we all having the same problem?
http://discussions.apple.com/message.jspa?messageID=2235623#2235623
Low Battery, and clicking sounds
http://discussions.apple.com/thread.jspa?messageID=2237714#2237714
Sad faced iPod, but my computer won’t recognize it
http://discussions.apple.com/thread.jspa?messageID=2242018#2242018
Sad iPod solution
http://discussions.apple.com/thread.jspa?threadID=412033&tstart=0
Re: try to restore ipod and it says "can't mount ipod"
http://discussions.apple.com/thread.jspa?threadID=443659&tstart=30
iPod making clicking noise and is frozen
http://discussions.apple.com/thread.jspa?messageID=2420150#2420150
Cant put it into disk mode
http://discussions.apple.com/thread.jspa?messageID=3786084#3786084
I think my iPod just died its final death
http://discussions.apple.com/thread.jspa?messageID=3813051
Apple logo & monochrome battery stay
http://discussions.apple.com/thread.jspa?messageID=3827167#3827167
My iPod ism’t resetting and isn’t being read by my computer
http://discussions.apple.com/thread.jspa?messageID=4489387#4489387
I am not suggesting that you should follow as well, but just read them as your reference. You are the person to make the call.
Finally, I read a fair comments from dwb, regarding of slapping the back of the iPod multiple times
Quote “This has been discussed numerous times as a 'fix'. It does work, at least for a while. In fact I remember using the same basic trick to revive Seagate and Quantam drives back in the mid to late 1980's. Why these tiny hard drives go bad I don't know - could be the actuator gets stuck in place or misaligned. Could be the platter gets stuck or the motor gets stuck. 'Stiction' was a problem for drives back in the 80's. Unfortunately the fix can cause damage to the platter so we temporarily fix one problem by creating another. But I know of two instances where a little slap onto the table revived the iPods and they are still worked a year or more later.”UnQuote

Similar Messages

  • Help - Kernel Error and Lost Disks

    My Mac told me this a.m. that it needed software updating, so I clicked OK...it went to restart, and I got a Kernel error. Now...I can't find our original disks, which they say we need. We moved a year ago, and I have a terrible feeling they got tossed.
    Do I have to buy new disks? Is that even possible? If so, could I buy any software I wanted?

    Mcubstea:
    Welcome to Apple Discussions.
    Exactly what did the kernel error look like?
    Can you copy the kernel log and post it in your response?
    You may or may not need install discs, depending on the kernel panic. If you don't mind, please post details of your computer system in your profile. Please include processor speed, display size, RAM installed, HDD capacity, HDD available capacity etc.
    Thanks.
    cornelius

  • Sfwordprocessing plug-in error and frozen disk permissions

    I was able to use iweb 1.1.2 until I loaded Leopard. Now, not only can I not change my webpage hosted by Mac, but I can not even delete it to try and build it new. Nor can I run Disk Repair Permissions (it freezes at about 1/8th and doesn't move-the same with Verify Permissions). What do I need to do to fix this? When I try to load most of the pages in my iweb, I get the SFWordProcessing plug-in message. None of this was an issue till I upgraded to Leopard.
    I need to update and change my website and quickly, please help! Would also like some sort of answer regarding the Disk Repair Permissions, Disk Verify Permissions.
    I have posted this in iweb as well, but that section seems to get little traffic and I would really like to find an answer if anyone out there has one.

    Have you installed Toast?
    Some people have this problem and it goes away when the reinstall Toast.
    Others have found that the Oblique font is a problem with a variety of programs including the iWork apps and iWeb.
    They all get the SFWordProcessing plug-in message.
    Removing any reference to the Oblique font seems to resolve the issue for those people.
    Apple - Support - Discussions - SFWordProcessing plugin ...
    http://discussions.apple.com/thread.jspa?messageID=6520532

  • Every time I try to back up my Macbook Pro with an external hard drive using Time Machine, I receive the error of "the disk does not have enough space". I have a 500GB hard drive and only 120GB Macbook. It worked fine before the latest Maverick's

    Every time I try to back up my Macbook Pro with an external hard drive using Time Machine, I receive the error of "the disk does not have enough space". I have a 500GB external hard drive and only 120GB Macbook. It worked fine before the latest Maverick's update. Any help would be greatly appreciated.

    My guess would be it has created an entirely new backup of your drive when you upgraded to Mavericks.
    See Here: http://pondini.org/TM/1.html
    And here: http://pondini.org/TM/9.html
    Peruse the whole site. There is a lot of information there.

  • I am installing Windows 7 on my macbook pro OSX Mountain Lion and I get an error message:" Your disk could not be partitioned." What does this mean?

    I am installing Windows 7 and I get an error message: "Your disk could not be partitioned. An error ocurred while partitioning the disk". I was using a Windows & Home Premium OEM Software that I purchased from Microsoft. I was given to Windows 100GB to use for Quickbooks pro, Payroll and Publisher. I have the Macbook Pro model No: MD102LL/A. Does anyone knows what happenned or can advice me in what to do? Please help!!!

    amarilysfl wrote:
    "Your disk could not be partitioned. An error occurred while partitioning the disk".
    https://www.apple.com/support/bootcamp/
    If you were using Apple's BootCamp and received this message, quit it and open Disk Uility in your Applicaitons/Utilities folder.
    Select the Macintosh HD partition on the left and select Erase and Erase Free Space > Zero option and let it complete (important) this will check the spare space for bad sectors that can cause issues formatting partitions.
    Once it's completed, try creating a partiton again in BootCamp.
    If that doesn't work, then hold command option r keys down while connected to a fast internet connection, Internet Recovery should load (spinning globe) and then in that Disk Utility, select your entire internal drive and click > First Aid > Repair Disk and Permissions.
    reboot and attempt Bootcamp again.
    If you still get a error, it might be that you have OS X data on the bottom area where BootCamp partition needs to go. This would occur if you had the drive or computer for a long time or wrote a large amount of files to the drive and nearly filling it up and then reduced some, but it left traces in the area BootCamp needs to go.
    To fix this
    BootCamp: "This disc can not be partitioned/impossible to move files."
    How to safely defrag a Mac's hard drive

  • I've cleared almost 30 gig off of my hard drive in the past 2 weeks, and it will temporarily show that in the Get Info box.  But hours later, I am still getting a disk full error and all of the memory has disappeared.

    I've cleared almost 30 gig off of my hard drive in the past 2 weeks, and it will temporarily show that in the Get Info box.  But hours later, I am still getting a disk full error and all of the memory has disappeared.  I have cleared my backup logs from Time Machine, checked the mail folder, cleaned out tons of photos and videos and it still keeps filling back up.
    In checking the log files, here is the message repeated over and over....
    Jul  4 07:18:13 Donald-Keele-Jrs-iMac-123.local CalendarAgent[213]: CoreData: error: (21) I/O error for database at /Users/donjr/Library/Calendars/Calendar Cache.  SQLite error code:21, 'unable to open database file'
    Jul  4 07:18:13 Donald-Keele-Jrs-iMac-123.local CalendarAgent[213]: Core Data: annotation: -executeRequest: encountered exception = I/O error for database at /Users/donjr/Library/Calendars/Calendar Cache.  SQLite error code:21, 'unable to open database file' with userInfo = {
                  NSFilePath = "/Users/donjr/Library/Calendars/Calendar Cache";
                  NSSQLiteErrorDomain = 21;
    Jul  4 07:18:14 Donald-Keele-Jrs-iMac-123.local cfprefsd[180]: CFPreferences: error creating file /Users/donjr/Library/Preferences/com.apple.iPhoto.plist.t3l894p: 28
    Jul  4 07:18:30 Donald-Keele-Jrs-iMac-123.local Printer Pro Desktop[275]: Empty task
    Jul  4 07:18:33 Donald-Keele-Jrs-iMac-123.local Microsoft Sync Services[8149]: [0x16697c0] |ISyncSession|Warning| com.microsoft.Entourage2008: transitioning to cancel - session cancelled by server: Client 'com.microsoft.Entourage2008' tried to start a session for the plan 45AD80C3-0D52-4CF2-8CBA-103564B6C47C and the plan no longer exists.
    Jul  4 07:18:33 Donald-Keele-Jrs-iMac-123.local Microsoft Sync Services[8149]: Warning: NSBundle NSBundle </Applications/Microsoft Office 2008/Office/Microsoft Sync Services.app/Contents/Resources/MicrosoftOfficeNotes.syncschema> (not yet loaded) was released too many times. For compatibility, it will not be deallocated, but this may change in the future. Set a breakpoint on __NSBundleOverreleased() to debug
    Jul  4 07:18:33 Donald-Keele-Jrs-iMac-123.local Microsoft Sync Services[8149]: Warning: NSBundle NSBundle </Users/donjr/Library/Sync Services/Schemas/MicrosoftOfficeNotes.syncschema> (not yet loaded) was released too many times. For compatibility, it will not be deallocated, but this may change in the future. Set a breakpoint on __NSBundleOverreleased() to debug
    Jul  4 07:18:45 Donald-Keele-Jrs-iMac-123 kernel[0]: (default pager): [KERNEL]: default_pager_backing_store_monitor - send LO_WAT_ALERT
    Jul  4 07:18:45 Donald-Keele-Jrs-iMac-123 kernel[0]: macx_swapoff SUCCESS
    Jul  4 07:19:31 Donald-Keele-Jrs-iMac-123.local Printer Pro Desktop[275]: Empty task
    Any ideas on what to do next?
    I'm running and iMac 20-inch  early 2009
    Processor  2.66 GHz Intel Core 2 Duo
    Memory  8 GB 1067 MHz DDR3
    Graphics  NVIDIA GeForce 9400 256 MB
    Software  OS X 10.8.4 (12E55)

    Step 1
    Quit Calendar. Triple-click the line below to select it:
    ~/Library/Calendars/Calendar Cache
    Right-click or control-click the highlighted line and select
    Services ▹ Reveal
    from the contextual menu. A Finder window should open with a file named "Calendar Cache" selected.
    Move the selected file to the Trash. There may be one or two other files in the same folder with names that begin in "Calendar Cache". If so, delete those files too.
    Step 2
    Empty the Trash if you haven't already done so. If you use iPhoto, empty its internal Trash as well:
    iPhoto ▹ Empty Trash
    Then reboot. That will temporarily free up some space.
    According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation. You also need enough space left over to allow for growth of your data. There is little or no performance advantage to having more available space than the minimum Apple recommends. Available storage space that you'll never use is wasted space.
    To locate large files, you can use Spotlight. That method may not find large folders that contain a lot of small files.
    You can more effectively use a tool such as OmniDiskSweeper (ODS) to explore your volume and find out what's taking up the space. You can also delete files with it, but don't do that unless you're sure that you know what you're deleting and that all data is safely backed up. That means you have multiple backups, not just one.
    Deleting files inside an iPhoto or Aperture library will corrupt the library. Any changes to a photo library must be made from within the application that created it. The same goes for Mail files.
    Proceed further only if the problem isn't solved by the above steps.
    ODS can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To see everything, you have to run it as root.
    Back up all data now.
    Install ODS in the Applications folder as usual. Quit it if it's running.
    Triple-click the line of text below to select it, then copy the selected text to the Clipboard (command-C):
    sudo /Applications/OmniDiskSweeper.app/Contents/MacOS/OmniDiskSweeper
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window (command-V). You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
    The application window will open, eventually showing all files in all folders. It may take some minutes for ODS to list all the files.
    I don't recommend that you make a habit of doing this. Don't delete anything while running ODS as root. If something needs to be deleted, make sure you know what it is and how it got there, and then delete it by other, safer, means. When in doubt, leave it alone or ask for guidance.
    When you're done with ODS, quit it and also quit Terminal.

  • After writing an html report on a floppy disk and removing it, labview shows an error message window: disk not present

    after writing an html report on a floppy disk and removing it, labview shows an error message window: disk not present.
    My pc is based on asus motherboard. Labview 7 and Windows 2000 sp4 installed.
    The error message continue also if i stop the application that generated report on a: .
    I've got this problem only on a pc: on other machines i don't have this problem (Labview only continues to access floppy but it doesn't show any window).
    Find below an example: first press the button to create a report on a: then remove the floppy, after 30-35 sec i've got the error message
    Attachments:
    prova.vi ‏55 KB

    Hi,
    I tried your vi: I don't get any error message after removing the disk but LV7 keeps on accessing the drive at regular intervals even if you stop the vi and close it!!! This is not supposed to happen.
    The only way to stop it is exit LV7.
    If you don't use the file dialog and you wire a full path, you don't get any problem.
    I also created a very simple vi that conditionally writes a text file on a: and I got the same behaviour.
    This problem occurs only with LV7, I tried the same examples in LV6.1 and everything was fine.
    If anybody wants to try I attach this simple example,
    Alberto
    Attachments:
    salva_testo1.vi ‏22 KB

  • I bought mountain lion for my macbook pro and I'm trying to install it and it says there was an error and I need to boot up but I don't have any other start up disks to boot up with. Are there any suggestions of how I could get my computer started?

    I bought mountain lion for my macbook pro and I'm trying to install it and it says there was an error and I need to boot up but I don't have any other start up disks to boot up with. Are there any suggestions of how I could get my computer started?

    Hold the Option key down and restart. Select one of the drives that comes up and hit the Return key.

  • My macbook wont start the screen turn blue and stay like that for hrs. It only work when i use safe mode, i try to use disk utilities to fix it but the disk utilities keep saying error and a bunch of other stuff. I dont the cds the comp came with, help.

    my macbook wont start the screen turn blue and stay like that for hrs. It only work when i use safe mode, i try to use disk utilities to fix it but the disk utilities keep saying error and a bunch of other stuff. I dont the cds the comp came with, help. i've tried the command s command p command v but nothing i've tried to the safe mode then a quick restart but nothing
    disk utility give me this:
    Process:         Disk Utility [371]
    Path:            /Applications/Utilities/Disk Utility.app/Contents/MacOS/Disk Utility
    Identifier:      com.apple.DiskUtility
    Version:         11.5.2 (298.4)
    Build Info:      DiskUtility-2980400~60
    Code Type:       X86-64 (Native)
    Parent Process:  launchd [86]
    Date/Time:       2013-11-05 03:29:41.247 -0500
    OS Version:      Mac OS X 10.6.8 (10K549)
    Report Version:  6
    Interval Since Last Report:          9522 sec
    Crashes Since Last Report:           29
    Per-App Interval Since Last Report:  981 sec
    Per-App Crashes Since Last Report:   25
    Anonymous UUID:                      F6B8E263-76C8-4C7D-AA58-48134BF4BA78
    Exception Type:  EXC_BAD_ACCESS (SIGSEGV)
    Exception Codes: KERN_INVALID_ADDRESS at 0x0000000000000020
    Crashed Thread:  0  Dispatch queue: com.apple.main-thread
    Thread 0 Crashed:  Dispatch queue: com.apple.main-thread
    0   libobjc.A.dylib                         0x0000000100c62fbc _read_images + 312
    1   libobjc.A.dylib                         0x0000000100c79721 map_images_nolock + 1266
    2   libobjc.A.dylib                         0x0000000100c62761 map_images + 115
    3   dyld                                    0x00007fff5fc039c5 dyld::notifyBatchPartial(dyld_image_states, bool, char const* (*)(dyld_image_states, unsigned int, dyld_image_info const*)) + 853
    4   dyld                                    0x00007fff5fc0c849 ImageLoader::link(ImageLoader::LinkContext const&, bool, bool, ImageLoader::RPathChain const&) + 201
    5   dyld                                    0x00007fff5fc04d54 dyld::link(ImageLoader*, bool, ImageLoader::RPathChain const&) + 118
    6   dyld                                    0x00007fff5fc08f7c dlopen + 490
    7   libSystem.B.dylib                       0x0000000100a14e40 dlopen + 61
    8   com.apple.CoreFoundation                0x0000000100d78ef7 _CFBundleDlfcnLoadBundle + 231
    9   com.apple.CoreFoundation                0x0000000100d77e97 _CFBundleLoadExecutableAndReturnError + 1191
    10  com.apple.Foundation                    0x0000000101008355 _NSBundleLoadCode + 638
    11  com.apple.Foundation                    0x0000000101007c78 -[NSBundle loadAndReturnError:] + 742
    12  com.apple.Foundation                    0x000000010101960c -[NSBundle principalClass] + 38
    13  com.apple.framework.DUSupport           0x0000000100082080 -[DUModuleManager(_private) findDUModules:] + 405
    14  com.apple.framework.DUSupport           0x0000000100081ed9 -[DUModuleManager orderedModuleListOfModules] + 40
    15  com.apple.DiskUtility                   0x0000000100006082 0x100000000 + 24706
    16  com.apple.DiskUtility                   0x0000000100005f59 0x100000000 + 24409
    17  com.apple.AppKit                        0x0000000101444625 -[NSWindowController _windowDidLoad] + 538
    18  com.apple.AppKit                        0x00000001013e1f77 -[NSWindowController window] + 112
    19  com.apple.AppKit                        0x00000001015f61d9 -[NSWindowController showWindow:] + 47
    20  com.apple.AppKit                        0x00000001015c7c5c -[NSDocument showWindows] + 98
    21  com.apple.AppKit                        0x00000001015c64bb -[NSDocumentController openUntitledDocumentAndDisplay:error:] + 340
    22  com.apple.AppKit                        0x00000001014f7b44 -[NSDocumentController(NSInternal) _openUntitled] + 111
    23  com.apple.AppKit                        0x00000001014f79ab -[NSApplication _doOpenUntitled] + 257
    24  com.apple.AppKit                        0x00000001014f733b -[NSApplication(NSAppleEventHandling) _handleAEOpen:] + 185
    25  com.apple.AppKit                        0x00000001014f6fd9 -[NSApplication(NSAppleEventHandling) _handleCoreEvent:withReplyEvent:] + 77
    26  com.apple.Foundation                    0x0000000100ffd0d6 -[NSAppleEventManager dispatchRawAppleEvent:withRawReply:handlerRefCon:] + 360
    27  com.apple.Foundation                    0x0000000100ffcf06 _NSAppleEventManagerGenericHandler + 114
    28  com.apple.AE                            0x0000000104d7332b aeDispatchAppleEvent(AEDesc const*, AEDesc*, unsigned int, unsigned char*) + 162
    29  com.apple.AE                            0x0000000104d73224 dispatchEventAndSendReply(AEDesc const*, AEDesc*) + 32
    30  com.apple.AE                            0x0000000104d7312b aeProcessAppleEvent + 210
    31  com.apple.HIToolbox                     0x00000001028a0619 AEProcessAppleEvent + 48
    32  com.apple.AppKit                        0x00000001013fc095 _DPSNextEvent + 1191
    33  com.apple.AppKit                        0x00000001013fb801 -[NSApplication nextEventMatchingMask:untilDate:inMode:dequeue:] + 155
    34  com.apple.AppKit                        0x00000001013c168f -[NSApplication run] + 395
    35  com.apple.AppKit                        0x00000001013ba3b0 NSApplicationMain + 364
    36  com.apple.DiskUtility                   0x0000000100002009 0x100000000 + 8201
    37  com.apple.DiskUtility                   0x0000000100001db8 0x100000000 + 7608
    Thread 1:  Dispatch queue: com.apple.libdispatch-manager
    0   libSystem.B.dylib                       0x0000000100a27c0a kevent + 10
    1   libSystem.B.dylib                       0x0000000100a29add _dispatch_mgr_invoke + 154
    2   libSystem.B.dylib                       0x0000000100a297b4 _dispatch_queue_invoke + 185
    3   libSystem.B.dylib                       0x0000000100a292de _dispatch_worker_thread2 + 252
    4   libSystem.B.dylib                       0x0000000100a28c08 _pthread_wqthread + 353
    5   libSystem.B.dylib                       0x0000000100a28aa5 start_wqthread + 13
    AND MORE TOO MUCH TO COPY N PASTE HELP PLEASE!!!!!

    Reset the PRAM
    Reinstall the operating system from the dvd (you will not loose your data)

  • After getting the dreaded gray/blue screen, I tried to run disk repair on the internal disk. I got an error message saying "Disk Utility can't repair this disk and restore your backed-up files. The volume Macintosh HD could not be verified completely

    After getting the dreaded gray/blue screen, I tried to run disk repair on the internal disk. I got an error message saying "Disk Utility can't repair this disk and restore your backed-up files. The volume Macintosh HD could not be verified completely." What do I do now? This is an iMac and I'm running 10.6.8.

    Clean Install of Snow Leopard
    Be sure to make a backup first because the following procedure will erase
    the drive and everything on it. See below for how to clone a drive.
         1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
             with your computer.  Insert the disc into the optical drive and restart the computer.
             After the chime press and hold down the  "C" key.  Release the key when you see
             a small spinning gear appear below the dark gray Apple logo.
         2. After the installer loads select your language and click on the Continue
             button. When the menu bar appears select Disk Utility from the Utilities menu.
             After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
             size.)  Click on the Partition tab in the DU main window.  Set the number of
             partitions to one (1) from the Partitions drop down menu, click on Options button
             and select GUID, click on OK, then set the format type to MacOS Extended
             (Journaled, if supported), then click on the Apply button.
         3. When the formatting has completed quit DU and return to the installer.  Proceed
             with the OS X installation and follow the directions included with the installer.
         4. When the installation has completed your computer will Restart into the Setup
             Assistant. Be sure you configure your initial admin account with the exact same
             username and password that you used on your old drive. After you finish Setup
             Assistant will complete the installation after which you will be running a fresh
             install of OS X.  You can now begin the update process by opening Software
             Update and installing all recommended updates to bring your installation current.
    Download and install Mac OS X 10.6.8 Update Combo v1.1.
    You may be able to backup your data if you have an erased external drive you can use. Before you do the above but after you have opened Disk Utility you can try to clone your drive:
    Clone using Restore Option of Disk Utility
      1. Open Disk Utility.
      2. Select the destination volume from the left side list.
      3. Click on the Restore tab in the DU main window.
      4. Select the destination volume from the left side list and drag
           it to the Destination entry field.
      5. Select the source volume from the left side list and drag it to
          the Source entry field.
      6. Double-check you got it right, then click on the Restore button.
    Destination means the external backup drive. Source means the internal startup drive.
    Now this will only work if the drive is accessible and can be cloned by Disk Utility. Otherwise, you would need to access your drive from another Mac that you can connect via Firewire - Target Disk Mode.

  • Disk Utility - get errors and disk utility can not repair, even start ext.

    Hello
    I am using Mac OS X 10.5 on a MacBook Pro intel 2.4 Ghz Intel Core 2 Duo, 2 GB RAM, Intel and Boot Camp / Win XP installed.
    To check my user rights and repair the main HD I have installed 10.5 on my external 500 GB USB 2.0 HD. Started from it and started the disk utility trying to check and repair the Macintosh HD Partition (not win xp). I got following error messages:
    2007-12-01 10:47:12 +0100: „Festplatten-Dienstprogramm“ wurde gestartet.
    2007-12-01 10:47:20 +0100: Zugriffsrechte für „Macintosh HD“ reparieren
    2007-12-01 10:53:51 +0100: Warnung: Die SUID-Datei „usr/libexec/load_hdi“ wurde geändert und wird nicht repariert.
    2007-12-01 10:53:51 +0100: Warnung: Die SUID-Datei „System/Library/PrivateFrameworks/DiskManagement.framework/Versions/A/Resources /DiskManagementTool“ wurde geändert und wird nicht repariert.
    2007-12-01 10:53:51 +0100: Warnung: Die SUID-Datei „System/Library/PrivateFrameworks/DesktopServicesPriv.framework/Versions/A/Reso urces/Locum“ wurde geändert und wird nicht repariert.
    2007-12-01 10:53:52 +0100: Warnung: Die SUID-Datei „System/Library/PrivateFrameworks/Install.framework/Versions/A/Resources/runner “ wurde geändert und wird nicht repariert.
    2007-12-01 10:53:55 +0100: Die Zugriffssteuerungsliste wurde gefunden, jedoch nicht für „private/var/root/Library/Preferences“ erwartet.
    2007-12-01 10:53:55 +0100: Die Zugriffssteuerungsliste wurde gefunden, jedoch nicht für „private/var/root/Library“ erwartet.
    2007-12-01 10:53:55 +0100: Die Zugriffssteuerungsliste wurde gefunden, jedoch nicht für „private/var/root“ erwartet.
    2007-12-01 10:53:57 +0100: Warnung: Die SUID-Datei „System/Library/PrivateFrameworks/Admin.framework/Versions/A/Resources/readconf ig“ wurde geändert und wird nicht repariert.
    2007-12-01 10:53:57 +0100: Warnung: Die SUID-Datei „System/Library/PrivateFrameworks/Admin.framework/Versions/A/Resources/writecon fig“ wurde geändert und wird nicht repariert.
    2007-12-01 10:54:00 +0100: Warnung: Die SUID-Datei „usr/libexec/authopen“ wurde geändert und wird nicht repariert.
    2007-12-01 10:54:01 +0100: Die Zugriffssteuerungsliste wurde gefunden, jedoch nicht für „System/Library/CoreServices/Finder.app/Contents/Resources/CannedSearches/All PDF Documents.cannedSearch/Resources/version.plist“ erwartet.
    2007-12-01 10:54:01 +0100: Warnung: Die SUID-Datei „System/Library/CoreServices/Finder.app/Contents/Resources/OwnerGroupTool“ wurde geändert und wird nicht repariert.
    2007-12-01 10:56:07 +0100: Die Zugriffssteuerungsliste wurde gefunden, jedoch nicht für „Applications“ erwartet.
    2007-12-01 10:56:07 +0100: Die Zugriffssteuerungsliste wurde gefunden, jedoch nicht für „Library“ erwartet.
    2007-12-01 10:56:11 +0100:
    2007-12-01 10:56:11 +0100: Reparatur der Zugriffsrechte abgeschlossen
    2007-12-01 10:56:11 +0100:
    2007-12-01 10:56:11 +0100:
    Translation: wurde geändert und wird nicht repariert. = was changed but was not repaired.
    Because it can not repair the errors I have started "repair disk". It says "can not unmount Macintosh HD". Even if I have started from the external disk?
    So I get my install CD (Mac OS X 10.5) and started from that. I got the same errors with that disk utility.
    Can someone tell me, if this are "right" errors or do I have to try more to repair this errors? My computer is running fine.
    I am a bit irritated now.
    Best regards
    arjello
    Message was edited by: arjello
    Message was edited by: arjello

    Way back in Jaguar Disk Utility would pop up dozens of "advisory" messages of no interest nor meaning to anyone except possibly some programmers. This needlessly alarmed regular users. The same thing is happening again in Leopard. The SUID messages are not meaningful nor are they errors, in effect they are announcements that some list being consulted by the utility says one thing, the actual files say something else, Disk Utility is going to assume there is a reason for actual setting and not going to change it, but you (it's kind of assuming you are the programmer) should know this. If the "Die Zugriffssteuerungsliste" is German for ACL (Access Control List) it is the same deal: an ACL was found, but no one told Disk Utility there was suppose to be one.
    If the messages bother you download the whole 110MB 10.5.1 update and run it. It quiets down the output for all the SUID statements save one. Might even shut down the ACL advisories--don't know because I haven't bothered to download 110MBs of updater, I just ran the patch update.
    Francine
    Francine
    Schwieder

  • When i burn a disk in Disk Utility, the burn completes but the verification process does not complete and my disk pops out. The error message i get is something like this "burn failed because disk cannot be verified," PLEASE HELP

    when i burn a disk in Disk Utility, the burn completes but the verification process does not complete and my disk pops out. The error message i get is something like this "burn failed because disk cannot be verified," PLEASE HELP.
    Also when i take the disk out it seems fine nd everything seems to be burned onto the disk. I am buring mac os x lion onto a disk.
    The disk i am using is nextech and i am burning at the slowest speed (4x).
    Also this is my 3rd time trying to do this and the verifying process keeps failing.... what do i do?

    see there
    http://www.techmixer.com/best-free-mac-burning-software-for-mac-osx/
    what you like most
    try different brand of CD/DVD

  • Hey yall.. I lost everything from my mac from a data encrypted error and now it won't let me download Lightroom off of the disk again onto my new mac. What should I do?

    Hey yall.. I lost everything from my mac from a data encrypted error and now it won't let me download Lightroom off of the disk again onto my new mac. What should I do?

    Hi Brennacoyle,
    Can you please share the error message that you are getting while trying to download on the new MAC ?
    Cheers,
    Kartikay Sharma

  • I downloaded OS Mountain Lion 10.8... and when I was getting ready to install I get "This disk has S.M.A.R.T. errors.  This disk has a hardware problem that can't be repaired.  I have read some of the same comments below.  Why?

    I was trying to install OS X Mountain Lion 10.8... and I got an error saying, "This disk has S.M.A.R.T. errors.  This disk has a hardware problem that can't be repaired.  I saw several other questions below of people having the same or similar problems.  Does this mean that my hard drive is about to crash?  I plan to head to the place I purchased and have it checked out.  I backed up my data a couple of days ago.  Any comments?

    Yes, S.M.A.R.T. is a built-in diagnostic on the hard drive, and it is reporting a problem that may cause it to fail.
    You can see the same status in Disk Utility, and possibly get more info.  Run Disk Utility and select the DRIVE in the sidebar.  Be sure to select the DRIVE and not the volume indented below it.  At the bottom of the window, there is a field for S.M.A.R.T. Status.  If there is no problem, it should say Verified.
    You can also do a Get Info on the drive (File -> Get Info) in Disk Utility, and the Info window provides more detailed information (toward the bottom) about what is being checked.

  • When attempting to format my new internal Hitachi 500 GB hard drive I get an I/o error and the drive is reading as a 3.4 TB drive in disk utility.  Any thoughts?

    I have a 2007 MacBook. 2 years ago I upgrade the HD to a 500 GB 7200 RPM Hitachi. That drive just failed so I purchased another from the same store. When attempting to reload the OS the drive was not showing up as an option when asked to select a destination drive for the OS. I then exited the install and opened disk utility. Disk utility lists the capacity of the drive as 3.4 TB and when attempting to partition the drive it gives an input/output error. So I tried the hard drive from my other MacBook which already has an OS on it and it works fine. I surmised that the drive was faulty and had the store exchange it for another of a different model, but same specs. Second drive is doing the exact same thing. I figured there must be something wrong internally with the logic board so I tried using my other MacBook to load the OS and it's giving me the same exact error. Now I'm wondering what the deal is. When using the original 160 GB HD that came in the machine it works fine but the brand new one doesn't work. Any thoughts?

    I have a 2007 MacBook. 2 years ago I upgrade the HD to a 500 GB 7200 RPM Hitachi. That drive just failed so I purchased another from the same store. When attempting to reload the OS the drive was not showing up as an option when asked to select a destination drive for the OS. I then exited the install and opened disk utility. Disk utility lists the capacity of the drive as 3.4 TB and when attempting to partition the drive it gives an input/output error. So I tried the hard drive from my other MacBook which already has an OS on it and it works fine. I surmised that the drive was faulty and had the store exchange it for another of a different model, but same specs. Second drive is doing the exact same thing. I figured there must be something wrong internally with the logic board so I tried using my other MacBook to load the OS and it's giving me the same exact error. Now I'm wondering what the deal is. When using the original 160 GB HD that came in the machine it works fine but the brand new one doesn't work. Any thoughts?

Maybe you are looking for

  • File Sharing with Windows XP?

    Trying to connect from my windows machine to my mac. On the mac, I eneabled filesharing in the preferences, and enabled smb. I can connect windows to the mac (i.e. <double backslash><the mac's IP>) - once there I see one folder for each of the user's

  • USB ports not working in safe mode

    I am trying to back up my computer before i take it to the apple store and i cant back up in safe mode using time machine, becuase im guess the USB ports arent working. Are there any solutions to this problem?

  • Region Setting on MacBook pro - no longer CD rediness supported

    Hi, I live in Europe, but I'm quite often travelling to the US. Yesterday I bought a DVD movie in US with region code. Since I'm using Vista for Outlook purposes on my MacBook Pro I was too lazy to boot in Leopard. So I was asked by Vista to set the

  • HT5649 How do I get iTunes to find the items in my library

    I have tons of music in my library, but iTunes ignores it all.  tried deleting and reinstalling.  The only thing I can see is for it to get them one a time.  Where is the option to find music files on the computer????

  • Content-Type: message/rfc822?

    So Mail on the iphone doesn't appear to be able to display inline the following content type Content-Type: message/rfc822 Content-Disposition: inline Content-Transfer-Encoding: 8bit Does anybody else know a way Mail can display the message as an atta