Error AP-CANNOT READ FIELD (FIELDNAME=PARAMETER.CONFIG)

Hi,
We are running a depriciation report in our test instance which is on 12.0.6 Oracle Apps
While report executes we get this error:Error AP-CANNOT READ FIELD (FIELDNAME=PARAMETER.CONFIG)
Can u please highlight where the error lies.

Hi;
Please see:
Error AP-CANNOT READ FIELD (FIELDNAME=PARAMETER.CONFIG) When Viewing the Concurrent Request Output [ID 466410.1]
Regard
Helios

Similar Messages

M90p - Error 0189 Cannot read the security EEPROM

Hi,
I have a Thinkcentre here that says during POST:
Error 0189 Cannot read the security EEPROM
It then prompts me to enter the BIOS, but no matter what I try, I cannot get rid of the message and boot to the OS.
What should I do?
BTW, what is the header labeled "ME_Disable" on the motherboard?
Thanks,
Smith

Hi! I with have problem 0189 Error. How to fix it? Pls.

Error 1 fatal error C1083: Cannot open include file: 'boost/config.hpp': No such file or directory C

Newbie to VC++
Getting the below error in VC++ 2005, Indesign CS4
1>------ Build started: Project: WriteFishPrice, Configuration: Debug Win32 ------
1>Performing Custom Build Step
1>Compiling...
1>WFPNoStrip.cpp
1>C:\Program Files\Adobe\adobe_indesign_cs4_products_sdk_578win\source\precomp\common\ShukHeaders.cp(19) : fatal error C1083: Cannot open include file: 'boost/config.hpp': No such file or directory
1>WFPID.cpp
1>C:\Program Files\Adobe\adobe_indesign_cs4_products_sdk_578win\source\precomp\common\ShukHeaders.cp(19) : fatal error C1083: Cannot open include file: 'boost/config.hpp': No such file or directory
1>VCPlugInHeaders.cpp
1>C:\Program Files\Adobe\adobe_indesign_cs4_products_sdk_578win\source\precomp\common\ShukHeaders.cp(19) : fatal error C1083: Cannot open include file: 'boost/config.hpp': No such file or directory
1>TriggerResourceDeps.cpp
1>C:\Program Files\Adobe\adobe_indesign_cs4_products_sdk_578win\source\precomp\common\ShukHeaders.cp(19) : fatal error C1083: Cannot open include file: 'boost/config.hpp': No such file or directory
1>SDKPlugInEntrypoint.cpp
1>C:\Program Files\Adobe\adobe_indesign_cs4_products_sdk_578win\source\precomp\common\ShukHeaders.cp(19) : fatal error C1083: Cannot open include file: 'boost/config.hpp': No such file or directory
1>Generating Code...
1>Build log was saved at "file://c:\id6sdk\build\win\objD\WriteFishPrice\BuildLog.htm"
1>WriteFishPrice - 5 error(s), 0 warning(s)
========== Build: 0 succeeded, 1 failed, 0 up-to-date, 0 skipped ==========
I have added the path of config.hpp in "addition include directories" still it is throwing the same error.
Regards,
Suresh

Neither the first not the second one:
am using the following path:
C:\Program Files\Adobe\adobe_indesign_cs4_products_sdk_578win\external\asl\boost_libraries\boost
Now i have copied the complete 'external' folder to C:\id6sdk\ and added the directory now it is showing the following error:
Getting the following error:
fatal error C1083: Cannot open include file: 'IPMUnknown.h': No such file or directory C:\Program Files\Adobe\adobe_indesign_cs4_products_sdk_578win\source\precomp\common\ShukHeaders.cp 46
Don't understand the concept one error leading to the other error.
How to come out of these kind of problem.
Regards,
Suresh

I am unable to copy my contact which are in *.vcf format in my pc to my icloud. error shows cannot read the vcard. help

i am unable to copy my contact which are in *.vcf format in my pc to my icloud. error shows cannot read the vcard. help

Hey guys,
So this is follow up from my debarkle with the EDD. I found out my problem with copying files from Mac to EDD and vice versa was a result of a not so good EDD ( i had an apollo hard drive from imation) that was not very compatible with macs. So i did my research and found out that the best hard drives were Western Digital and Seagate. I bought the newest western digital EDD 1TB and formated it to FAT32 and guess what...no problems so far. The only problem is that FAT32 format doesn't copy files larger than about 4 gigs so i couldnt copy a movie from my brothers computer onto my EDD that was 1080p. You could probably resolve that by partitioning a small part of your hard drive in ExFAT? but yeah, hopefully that helped guys.
Aaisha

Created a movie in IMOVIE and transferred it to dvd but cannot get it to play on my dvd player. i downloaded the free Burn program since i don't have idvd on my new mac the dvd comes up disk error or cannot read

created a movie in IMOVIE and transferred it to dvd but cannot get it to play on my dvd player. i downloaded the free Burn program since i don't have idvd on my new mac the dvd comes up disk error or cannot read. I am using a dvd-r dvd and my dvd player says that it uses this type of dvd. Any suggestions. I spoke to an Apple Support person who helped me burn the dvd but it still didn't work...help???

There's a difference between a data DVD, and a DVD-Video. I believe you made a data DVD, which can't be played in a video player. The Burn feature of the Finder can't author a DVD-V, just data discs.
I assume you made a Project, and put clips from your Event Library into the Project. But then, how did you output your Project, using the SHARE menu?
When I pull down iMovie '11s SHARE menu, "iDVD..." is one of the options. It's the job of iDVD to make the menu that appears when you insert a DVD into your player (that says the title, and chapters, and extras, etc.). You need software that will made a DVD-V disc. Lacking that, you might be able to go to Share/Export Movie... or Share/Export using QuickTime... to get your video into a format that software like Roxio's Toast could burn.

Error! Cannot read or write to my ipod

Whenever I plug my ipod into my powerbook, I get the error, "The ipod cannot be updated. The disk could not be read or written to." It was working fine, and then all of a sudden this happened.
I've restored the ipod and reinstalled itunes, but I still have the same problem. The ipod is working fine, and I can still add music to it, but I have to do it manually and it locks up repeatedly. I have had problems syncing iphoto with it as well.
Please help! I've talked to a few friends that said it is a sign that my hard drive is failing. Any thoughts?

The solution is or at least it was for me is as simple as the "speed" of your USB conection. On my old PC i would connect my ipod via a USB on the front casing , no problems, when i changed my PC i used the front USB again and got the cannot read or write to ipod error. I just connected the ipod to one of the USBs at the rear and as i understand it they need to be USB2 type , have a go try all the USBs you have especially the ones at the back of your PC , hope this helps it did for me

I pad error msg: cannot read contents of ipad.

Everytime I try to connect my Ipad mini to Itunes via my PC- I get an immediate error message saying that the contents on my Ipad cannot be read and that I should restore it.
I'm very reluctant to do this, as it's a hassle to have to replace all my apps and music. Plus my ipad isnt even two months old! I have tried re-booting my ipad/ turning my PC on and off etc- but still no luck- has anybody any suggestions that could help me please?
Thanks

This article tells you exactly how to restore your iPad:
http://support.apple.com/kb/HT1414
Will you lose information? Well, that depends on how much information you saved when you did your last backup. You can retrieve that information - the rest will be lost. You will certainly lose all email messages.

When syncing my iPod photo it transfers 2 songs then gives error message ' cannot read/write disk' what wrong?

Can someone tell me whats going wrong when I manually sync my iPod with computer only 2 songs transfer to my iPod then I get error message ' unable to read/write disk ' the 2 songs are transferred to iPod and I have to keep starting the process over again, what can I do?

First, try shutting down (powering off) your computer and resetting the iPod
http://support.apple.com/kb/HT1320
Start up the computer, and connect the iPod to a direct USB port on the computer, if you have been using a USB hub. If there are other USB devices (other than standard keyboard/mouse) connected, you may want to disconnect them, as a test.
If that does not help, or you already did that, it is possible that the iPod's hard drive has become faulty. It is also possible that the hard drive is OK, but there is data corruption that is making the iPod's storage unreliable.
If the problem is not resolved, you should probably do a Restore on the iPod in iTunes. The Restore button is on the iPod's Summary screen in iTunes. This will erase the iPod, reinstall its software, and set it to default settings. If the cause is data corruption, the Restore (erasing the storage) should fix the problem. However, if the cause is a hardware fault on the hard drive, it will not help; the Restore may not complete successfully, which will leave your iPod inoperable.

ITunes error: iTunes cannot read the contents of the iPhone...

Everything was working fine for me today and then this happened. The only change is there was a software update for iTunes. I've updated and restarted the iMac once before and once after the update. Am I going to lose all my stuff???

Did you every get a fix on this?
Thanks

"Cannot read Rebecca's iPod..." error message...

We keep getting an error saying "Cannot read Rebecca's iPod, please use the iPod installation software to update". When we do that it uninstalls and then we reinstall it but it keeps saying the same thing. We've wiped everything off and are trying to start over but it's not working.
Anyone know why ?
Thanks !

Make sure all the software is up to date...
iTunes
iPod Updater
Updating iPod's Software
Also, see if this helps at all (not sure, but try)...
Disk Cannot Be Read or Written to error when syncing iPod
btabz

HT4106 Cannot read the connected storage media error comes when I connect my SDHC card using apple camera connection kit

When I connect SDHC card using iPad camera connection kit I am getting error message 'cannot read the connected storage media'

I know you have to have your pictures in a folder called DCIM on the card.

Error - Cannot read PoD ID

Hi All,
When I am downloading the meter reading order, I am getting the error that 'Cannot read Point of Delivery ID'. Message no. EUI041. I have not attached a PoD number to the installation and don't have the requirement to use the PoD object in my project.
The reading order download was working properly. There were two changes recently gone into the system
a) SAP upgrade to enhancement pack 4.
b) Created a dummy service provider for technical object replication to CRM
Is this error due to any of the above activities.
Thanks and Regards,

Hello,
Have you activated the node CO_POD in your application form...?
Please deactivate the node CO_POD and regenerate your application form.
Regards
Olivia

Getting error "Cannot read property 'tooltip' of undefined"

Hi,
I have Predictive Analysis 1.18. In preferences I have checked Esri ArcGIS online and Entered credentials.
Also I have reopened the document. But not able to create Geo Map. Getting error as "Cannot read property 'tooltip' of undefined".
I have attached the screenshot of the same.
Can anyone please provide the solution?
Thanks and Regards,
Bhagyashri

The new runtime has an internal variable called 'data' in the Symbol class. The code in this composition is also using .data to store some user values which is modifying the internal state of the symbol in runtime and is resulting into js errors. If you change the variable name from data to say _data, this should work. I have already done that in the actions.js file and am attaching the updated copy here. Please do a double check once, as it is used in many places and I might have missed something as I do not understand the domain logic in this code much.
-Dharmendra

Keep getting "itunes cannot read the contents of the iPad" message when connecting my iPad 2 to Windows XP

Hi all,
I have an iPad 2 that I purchased in late 2011. I have a Windows XP PC. Of late, I have not been able to connect my iPad 2 to iTunes on my Windows XP (Service Pack 3) desktop. I keep getting the popular error "itunes cannot read the contents of the iPad. .... restore factory settings" message. I have tried re-installing latest iTunes altogether after fully uninstalling and removing registry entries. But it still keeps giving the same message. I have tried all the steps given here - http://support.apple.com/kb/TS1538 , except checking with a different USB cable. My cable however works well while charging. My system however seems to detect the iPad as camera. I desperately need some help to fix this.
Thanks,
Paddy

Worked for an iPad 4 (Retina) running iOS 7.0.3. connected to a Mac (Mavericks, iTunes 11.1.2). Although the file system is a bit different than what is shown on the video, the basic same steps can be carried out: download iFunbox (for Mac, obviously), go into "Raw file system", then "iTunes_Control" (you may want to switch to list view to see the complete name), then iTunes. There there was no iTunesDB file but I deleted iTunesCDB (was 0kB, expect that might have been the problem) and iTunesControl (0kB as well). Also deleted the Music folder in the previous directory.
After that I disconnected the iPad from iTunes, quit iTunes, relaunched, and it started sync'ing :-)
Note that now it's telling me that it cannot sync because an additional 10GB is required! Not sure what the problem is because the bar at the bottom of the iTunes window says it still has another 4GB available. I'm expecting there's a problem with how the size of the music is calculated (perhaps because I also sync Genius playlists and mixes), so I disabled music sync'ing for now so it can complete it once. Then I'll hand-pick the music again and hope it works!

Cannot copy IGMT: the parameter is incorrect

ok so heres my problem
i have had to recently wipe my whole laptop due to a hefty virus and in doing this i lost all my itunes library but once the restoration of my laptop was complete i proceeded to install i-tunes and use the method where you:
open itunes preferences
go into my computer and copy the music to a destination and then import the folder into itunes to have my collection back
but for some reason half way through copying and pasting it get the error message "cannot copy IGMT: the parameter is incorrect"
and only copies half my collection does anyone know the solution to this problem or a way around it?
much appreciated and thnx in adavnce to any help!

Sounds like that IGMT file is corrupt.
Try copying things over in chunks, and skip that file.
Here's the answer from a different forum:
http://forums.afterdawn.com/thread_view.cfm/344692

Error AP-CANNOT READ FIELD (FIELDNAME=PARAMETER.CONFIG)

Similar Messages

Maybe you are looking for