Error APERB014 in restart run ASKBN

Dear All,
     When I run ASKBN in " restart posting run", system show me error as below:
All documents were updated successfully, restart is not allowed
Message no. APERB014
     Can anyone help me on this?
Thanks!
Cindy

DETAILS OF OADB
Book Depreciation is 1 (Area posts in real time)
Then i double clicked & i went into following
Deprec. area    1    Book depreciation
                     Book deprec.
Real depreciation area is Checked
Posting in G/L - Area posts in real time
Target Ledger Group - BLANK
Different Depreciation Area - BLANK
Cross-syst.dep.area - BLANK
Acquisition value - Only positive or zero allowed
Net book value - Only positive or zero allowed
Investment grants - Only negative or zero allowed
Revaluation - All values allowed
Ordinary depreciat. - Only negative or zero allowed
Special Depr. - Only negative or zero allowed
Unplanned Depreciat. - Only negative or zero allowed
Transfer of reserves - Only negaitive or zero allowed
Interest - Only positive or zero allowed
Revaluation ord.dep.- No values allowed
Area for deprived area is unchecked

Similar Messages

  • Doesn't start when starting as administrator. Error Firefox is already running, but is not responding. To open a new window, you must first close the existing Firefox process, or restart your system.

    Update firefox, it asked me to update flash, I tried to update flash but it said I had to close firefox. A box came up and said the Flash install would continue when I closed firefox. I closed all firefox windows and no update of flash occurred. I tried relaunching firefox but got the "Doesn't start when starting as administrator. Error Firefox is already running, but is not responding. To open a new window, you must first close the existing Firefox process, or restart your system." message. I rebooted the system, no improvement. I tried to run firefox as administrator and got the same message. Either I find a fix or I won't be able to use firefox and will have to go back to ie.

    -> press '''CTRL''' + '''SHIFT''' + '''ESC''' to Open Task Manager -> Processes tab -> right-click '''firefox.exe''' and click '''End Process Tree''' -> close Task Manager
    Troubleshooting extensions and themes
    * https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes
    Troubleshooting plugins
    * https://support.mozilla.com/en-US/kb/Troubleshooting%20plugins
    Check and tell if its working.

  • Error on /SafeMode: error while trying to run project uncaught exception thrown by method called

    i try run VS 2012 with /SafeMode. I create new empty Winform. When I start debug, I got:
    "error while trying to run project uncaught exception thrown by method called through reflection"

    Hi Matanya Zac，
    Did you restart your machine? How about installing the VS2012 update 4?
    >>error while trying to run project uncaught exception thrown by method
    Did you install the VS update in your VS IDE? I met this issue before which was related to the VS update:
    https://social.msdn.microsoft.com/Forums/vstudio/en-US/5ead8ee9-ea09-4060-88b0-ee2e2044ff82/error-while-trying-to-run-a-project-uncaught-exception-thrown-by-method-called-through-reflection?forum=vsdebug
    If still no help, I suggest you repair your VS, and then restart your machine, test the result.
    Best Regards,
    Jack
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • When I try to start my macbook it gives an error of Please restart your computer, but when i do this i get the same error.

    When I try to start my macbook it gives an error of Please restart your computer, but when i do this i get the same error. This occured after my macbook pro shut down (because of low battery) while it was installing some updates. Please Help?

    Try reinstalling OS X. What version did you have installed? If it's Snow Leopard do this:
    Reinstall OS X without erasing the drive
    Do the following:
    1. Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Reinstall Snow Leopard
    If the drive is OK then quit DU and return to the installer.  Proceed with reinstalling OS X.  Note that the Snow Leopard installer will not erase your drive or disturb your files.  After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
    Download and install the Combo Updater for the version you prefer from support.apple.com/downloads/.

  • AFAB - Repeat Run & Restart Run

    Hello Sap Experts
    Can anyone kindly explain the situation we need to use "Repeat Run" & "Restart Run" available in AFAB.
    Kindly expain.
    Thanks & Regards
    Deepak Garg

    Hi Deepak,
    Repeat run is used to post the depreiciation for assets in a period, for which the planned depreciation has been posted.
    Ex: You have run the dep for 01-2010, then in the same period you might have added some more assets and need to be posted depreciation for the same period again. In this case repeat run would be useful.
    Note: this repeat run can be done for the last posted period only.
    Restart option is to continue the depreciation posting run from a last dep run, which is stopped due to some errors casused at the system level.
    Thanks,
    Srinu

  • Restart run of FPCC0002

    Hi.,
    Please let me know the process of restart run of FPCC0002. We have  executed the the FPCC0002 in 100 parallel jobs, out of whcih 10-20 jobs got cancelled.
    Can any one please let me know the  process of re run of the entire job again.
    Thanks in advance.
    Ramesh

    Hi @Valiant22 ,
    Welcome to the HP Forums!
    It is a terrific place to find answers.
    For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
    I understand that you let a friend use your notebook to download an update to a USB flash drive and   ran out of space before completing the download.  Now you have no sound on the notebook.  Is that correct?
    Are you running Windows 8?
    Is it possible the update installed in your notebook? 
    There is a recent Windows update that has been causing havoc with the sound on Windows 8 computers.  No Sound from Speakers (Windows 8).
    Did you accidentally mute your system?
    You also said you are unable to do a backup.  How are you trying to do your backup?
    Did you use the Windows backup, backup from the recovery manager or third party software?
    Was there an error message ?
    If you are not running Windows 8 please reply back with your Operating System and the  exact model of HP notebook  you have.
    How Do I Find My Model Number or Product Number?
    Good Luck!
    Sparkles1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

  • Im running on 10.6.8 On my mac...But i downloaded Mountain Lion recently and theres always an error once i try run it..do i need Snow Leopard 1st and then Mountain Lion..HELP!!

    Im running on 10.6.8 On my mac...But i downloaded Mountain Lion recently and theres always an error once i try run it..do i need Snow Leopard 1st and then Mountain Lion..HELP!!

    Sorry Josh, I'm having a bad day with my illness.
    Can I ask you to repost this question? Might try in the Mountain Lion forum as well as here.
    Put "Mountain Lion Install fails" in the headline box, then from your second post -
    "When i run The OSX Mountain Lion Icon i downloaded from the App Store it always gets to the point when its about to restart but the it keeps saying "please quit the application and try again" Now i've tried Re-Downloading it a lot of times but that doesn't work"
    and add the Mac specification -
    MacBook7.1
    2GB RAM
    Upgrading from Snow Leopard 10.6.8
    Sorry I can't concentrate sufficiently today.

  • Courier-imap ERROR: authdaemond is not running

    I recently upgraded the system and rebooted my server. On squirrelmail, I get a 
    Error connecting to IMAP server: localhost.
    111 : Connection refused
    I get:
    [root ~]: /etc/rc.d/courier-imap start
    ERROR: authdaemond is not running
    authdaemod seems to be running which makes everything spooky.
    This is what I have installed an running at the moment.
    DAEMONS=(syslog-ng network netfs crond sshd ntpd httpd spamd mysqld postfix rpcbind fam authdaemond courier-imap)
    I know I am not giving a lot of info, please request, I'll post everything. Any hints, clues, anything will be greatly appreciated
    w7zn7k

    I've resolved the issue. It's in the /etc/rc.d/courier-imap script.
    You need to change this line
    if [ ! -f /var/run/daemons/authdaemond ]; then
    with this line
    if [ ! -f /var/run/authdaemond.pid ]; then
    The full modified script:
    #!/bin/bash
    CI_DAEMONS=
    [ -f /etc/conf.d/courier-imap ] && . /etc/conf.d/courier-imap
    [ -z $AUTO_AUTHDAEMON_LAG ] && AUTO_AUTHDAEMON_LAG=2
    [ -z $AUTO_AUTHDAEMON ] && AUTO_AUTHDAEMON="false"
    . /etc/rc.conf
    . /etc/rc.d/functions
    case "$1" in
    start)
    [ -d /var/run/courier ] || mkdir -p /var/run/courier
    chown courier:courier /var/run/courier
    if [ "$AUTO_AUTHDAEMON" == "true" ]; then
    /etc/rc.d/authdaemond start
    sleep ${AUTO_AUTHDAEMON_LAG}
    fi
    if [ ! -f /var/run/authdaemond.pid ]; then
    echo "ERROR: authdaemond is not running"
    stat_fail
    exit 1
    fi
    for daemon in $CI_DAEMONS; do
    stat_busy "Starting Courier ${daemon}"
    /usr/lib/courier-imap/${daemon}.rc start
    if [ $? -gt 0 ]; then
    stat_fail
    else
    add_daemon $daemon
    stat_done
    fi
    done
    stop)
    for daemon in $CI_DAEMONS; do
    stat_busy "Stopping Courier ${daemon}"
    /usr/lib/courier-imap/$daemon.rc stop > /dev/null
    if [ $? -gt 0 ]; then
    stat_fail
    else
    rm_daemon $daemon
    stat_done
    fi
    done
    if [ "$AUTO_AUTHDAEMON" == "true" ]; then
    /etc/rc.d/authdaemond stop
    fi
    restart)
    $0 stop
    sleep 1
    $0 start
    echo "usage: $0 {start|stop|restart}"
    esac
    exit 0
    ~
    ~

  • Finder got an error. Application not running (-600)

    I have a LaunchAgent that calls a shell script, at login.  The shell script runs and determines the users AD container and then will runn the correct applescript application depending on the AD Container.    The applescript applications simply mount up the users network volumes, runs a few do shell scripts and then exits.
    It works and has been working for quite some time, under 10.5.x, 10.6.x, 10.7.x and even 10.8.x.  But I have started getting a few users who are getting a rather odd message in the logs that the script creates and I can't really find anything on the error message.
    "Finder got an error.  Application not running (-600)"
    If I log the user in and run the following at the command line:
    launchctl unload name.of.plist 
    It will unload the launchagent.
    If I type this at the commane line:
    launchctl load name.of.plist
    It works perfectly.  No errors.
    I can manually run the shell script it calls and that works fine.
    I can also manually double click the apps and those run fine. 
    I've changed the permissions, I've recopied, re-imaged, but I can not figure out why the script won't sometimes and gives me that error message.
    Has anyone seen this error message before and what I can try to do to fix it?
    Thank you in advanced.

    This sounds like a typical race condition, and it's impossible to solve without seeing the script.
    The issue is that your script is targetting some application that isn't available. Ordinarily AppleScript will launch an application if it's not already running, but during launch it's possible that your script is trying to target an application before it can be launched (because the user's envirnment is still loading).
    So you need to look at the script to see what it's doing, and what apps it's targeting. The fix might be as simple as adding a few delays to allow the system to finish logging in, but t's hard to say without more data.

  • Error message on restart: finder unexpectedly quit...and can do nothing! help please

    error message on restart: 'finder unexpectedly quit'...and then can do nothing! help please

    thank you hatter....repaired drive but problem persists....can you please explain what i am to do with the library or point me in the direction to read what to do?

  • Error while trying to run reports

    Hello,
    I am getting the following error while trying to run/launch AIX based Ora. Apps 11.5.10.2
    $ rwbld60
    Error: Object "" does not have windowed ancestor
    Does anyone know what could be causing this?
    Thanks,
    Chiru

    Hi chiru,
    it seems to be some environment problem ????Hey Mitra,
    Thank you for the reply.
    It definitely is an environment related issue(that is what I am trying to find out)
    This is occuring in our DEV environment. It works fine in TEST and PROD.
    More than likely it is due to low resources in the DEV...but I figured some one would have seen it before....and would answer my question with a definite answer.
    Thanks,
    Chiru

  • Error While trying to run a servlet

    I am getting the below error while trying to run a servlet using tomcat.In this admin is a directory where I have a html file called admin.html which calls the servlet AdminServlet & replaces the url by /servlet/AdminServlet.
    HTTP Status 404 - /SPOT/admin/servlet/AdminServlet
    type Status report
    message /SPOT/admin/servlet/AdminServlet
    description The requested resource (/SPOT/admin/servlet/AdminServlet) is not available.
    For more details I am also copying the code from the admin.html file below.
    <script language=JavaScript>
    document.location.replace('../servlet/AdminServlet');
    </script>

    JavaScript != javareplace or redirect ??

  • App File Server connection error when trying to run a BI Publisher report..

    hello Gurus...
    As above - App File Server connection error when trying to run a BI Publisher report.. FOR THE FIRST TIME.
    What does our DBA need to do..?
    error message reads..
    Template code: SUARXASR
    Template app:  AR
    Language:      en
    Territory:     GB
    Output type:   EXCEL
    [5/10/10 10:59:27 AM] [UNEXPECTED] [46321:RT1487572]
    oracle.apps.fnd.cp.util.RemoteFileException: An error occurred while attempting to establish an Applications File Server connection with the node FNDFS_*****.ac.uk. There may be a network configuration problem, or the TNS listener on node FNDFS_*****.ac.uk may not be running. Please contact your system administrator.
    at oracle.apps.fnd.cp.util.RemoteFile.readURL(RemoteFile.java:241)
    at oracle.apps.fnd.cp.util.RemoteFile.transferFile(RemoteFile.java:194)
    at oracle.apps.fnd.cp.util.RemoteFile.transfer(RemoteFile.java:130)
    at  oracle.apps.fnd.cp.opp.XMLPublisherProcessor.process(XMLPublisherProcessor.java:264)at oracle.apps.fnd.cp.opp.OPPRequestThread.run(OPPRequestThread.java:157)
    [5/10/10 10:59:27 AM] [46321:RT1487572] Completed post-processing actions for request 1487572.I'm sure we never had to set anything up in our Test instance!??!!??
    many thanks for looking..
    Steven

    nobody experienced this before..?

  • Error: Component failed to run due to a Object Package scheduling failure

    Hi,
    BusinessObjects XI R2 SP 5, FP 5.1
    I am trying to schedule a group of reports (crystal reports) via a package where the output destination is to an email. At the event of execution of the scheduled time for the package; the package fails with the error: Component failed to run due to a Object Package scheduling failure. (Note: When scheduled individually it is successful and it was copied to the package from its original location, so there is no mistake in parameters or ODBC connections)
    When we go to the history and within the instance, we see that some of the reports have the status as success and some are failed with the same error message. Even though some of the reports are made to fail at the event of 'NO DATA'; what I do not understand is that how come some of the other reports (which contains data and which works when trying to run manually or scheduled individually) are failing.
    I would understand something is wrong when the entire package fails which is not the case here as say of 50 reports, 5 are successful and the rest fails with the same error.

    Sorry posted on the wrong section...
    Edited by: Deepu Philip on Mar 18, 2010 5:38 PM

  • TS3212 I tried to update my iTunes, but I keep getting a runtime error  R6034 Attempt to run C runtime library incorrectly.    I also got an Error 7 (Windows error 1114)

    I tried to update my iTunes, but I keep getting a runtime error R6034 attempt to run C runtime library incorrectly.  I also got an Error 7 (Windows error 1114).  Now my currently iTunes will not open.

    Hey twhitten!
    Here is an article that will help you troubleshoot this issue:
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Take care, and thanks for visiting the Apple Support Communities.
    Cheers,
    Braden

Maybe you are looking for