Error API0259 while Importing Processflow in to owb 11g

Hi All,
I am using owb 11.1.0.7.0. I am getting the following error while importing the process flow into owb (the mdl dump was taken from owb 10gR2)
error: API0259: The object cannot be edited in Read-Only mode.
Can any body please tell me the solution. Its urgent.
Thanks in advance,
Siva

Hi Sutirtha,
Thanks for u r reply, the problem was solved. What I was doing is , trying to import only one process flow which is using as sub process in other process flow.thats giving me the error.
So, I have deleted all the process flows and imported whole process flow package in one go. That solved the problem.
Regards,
Siva

Similar Messages

Error while importing .MDL file to OWB 11g

Hi
I have a mdl file which is generated by OWB 10g, when i am importing it to OWB 11g it is giving message that please check if the disk is not full of write protected. i have given the access privilage to oralce folder.
i am using windows vista
Please help

Do yo
u have the software installed from a different user executing the software? If a different user, does the user have access to the sub-directories under owb\bin for write?
Also the directory where the MDL file is being imported from is where by default the log file will be, you can change this directory to somewhere you can write.
Cheers
David

Error occured while importing .der file in R/3 System

Hi Friends..
I tried to connect R/3 system with portal through SSO concept.
for that I have downloaded (.der) file from portal.
After that I tried to import that file through STRUSTSSO2 transaction in R/3 system, at that time I got
error message like " Error occured while importing"
so I can't able to import that (.der) file into R/3 System.
Please guide me with exact steps.
What should I do?
Thanks
Gowrishankar

Hi Micheal and raghav thanks for your reply.
Yes Micheal already we have installed .der file to other client in the same R/3 System
may be that's why it shows an error?
so what is the solution for this kind of scenarious?
Thanks
Gowrishankar

I am importing videos from my canon sl1 to my macbook when i use iphoto is says "iPhoto cannot import your photos because there was a problem downloading an image." and when i use image capture it says "An error occured while importing. The item 'MVI_1040

I am importing videos from my canon sl1 to my macbook air when i use iphoto is says "iPhoto cannot import your photos because there was a problem downloading an image." and when i use image capture it says "An error occured while importing. The item ‘MVI_1040'' Thanks in advance

Can you access the images on the phone with Image Capture (in the Applications Folder) ?

HT4858 why am I getting an error message while importing from iPhone photo stream to iMac ?

I have not shared any photo for a few months. I tried to import photos into my iMac from iPhone photostream and I get a message saying "an error occurred while importing photo, please try again later". What am I doing wrong ?

There's no need to import photos from your iPhone to your iMac. Photostream is synced automatically via iCloud on Wi-Fi.
On your iPhone, tap Settings > iCloud
Make sure Photo Stream is switched ON.
On your iMac, open System Preferences > iCloud
Make sure Photo Stream is selected.

Ipod photo - error occurred while importing

I think I bumped out the camera connector and now I have the "error occurred while importing" stuck on the screen. Can't even turn off the ipod now as it appears to be totally locked up. Any suggestions?

The response posted by username BillKia on Feb 27, 2013 may help (note that I am not referring to the post marked as the "Answer" although that is a workaround): http://answers.microsoft.com/en-us/windowslive/forum/gallery-program/access-deni ed-when-importing-photos-to-windows/ce58ee23-ed87-435f-b572-474cead8f09a

Error occured while importing a map.

I have got two design repositories and two runtime repositories in the same database. One is for OWB 9.2.0.4.0 and another for OWB 10.1.0.3.0.
I was trying to export 1 mapping from a project in OWB10g to OWB9i where the said project does not exist. The export operation ran smoothly but the following error occured while the import operation:
Error at line 25: MDL1261: Error importing DATAWAREHOUSE RTS/RTS.
Detailed Error Message:
MDL1162: System Type not specified before integrator.
While importing the options i used were:
Import option -----Add new metadata only
Match by---------Universal identifier.
Please help.

just a guess: while exporting use "physical names" in naming

Error VLD-1108 while validating the mapping in owb 11g

Hi All,
I am using owb 11.1.0.7.0. I am new to owb 11g. I am getting the following error while validating the mapping
error: VLD-1108 . Operator requires more input or output connections in order to generate mapping code.
I am using a function as operator and mapping it with the table.
Please tell me the solution for this. Its urgent
Thanks in advance,
Siva

Hi,
u must be using a procedure or table function that is called in the mapping for execution. When writing the function u would have specified 3 inputs but in the mapping u would have given only 2. check the number of inputs and make sure they match.
Regards
Bharadwaj Hari

Error getting while importing support package in R/3

Hi All,
I am getting one error following error while importing support package in R/3.
Open data extraction requests
The system has found a number of open data extraction requests.These should be processed before starting the object import process, as changes to DDIC structures could prevent data extraction requests from being read after the import, thus causing them to terminate. Call the Customizing Cockpit data extraction transaction and process all open extraction requests.
Can Anybody aware of this error.
Thx & Regds,
SGK

Hi,
I think I have to stop extraction process in LBWE or R/3. Can anybody tell me how to stop extraction process.
Thx & Regds,
SGK

Error occured while importing the transport request to quality

Hi,
The driver program and form are in active status. We got the output also.
When we checked the transport log for request(TR), it says that the form is not yet imported into EQ1. The system will update the transport log if there is any error related to driver program or form. Here we donu2019t find any error. As per the system response, u2018Import post-processing is not performed for this objectu2019.
I am getting below error while importing the request.
Import post-processing is not performed for this objectu2019.
Could anyone please provide me the solution.
Regards,
Hemant.

Hello,
i think u r working on scripts ?
if u r transportung the scripts i u need tcode SCC1.....
Thank u ,
santhsoh

Error occured while importing xsd.file(Name contains invalid characters: -

Hello,
i muss import xsd.file. while importing this error occured:
İFMEXTDEF CCTS_CCT_SchemaModule-2.0 | http://example.org/XXX/XXX/OUT/NOZ (SC_NOZ V001 of example.org):
Name contains invalid characters: - .
Only a(A)-z(Z), 0-9, and "_" are permitted
This xsdfile name is CCTS_CCT_SchemaModule-2.0 but PI doesn't accept "-". But i muss use this file because this file is standart. What can i do for this?
Thanks
Nurhan
Edited by: Nurhan on Oct 18, 2011 11:22 AM

HI,
PI doestnt support special characters like '-'. first you need to change the file name as you specify '-'. to remove that and you have to give '_'. then uyou have to impot >XSD file into ESR under ExternalDefination.
i hope this will help you.
regards,
ganesh.

ORACLE error 12705 while importing

Hi,
I exported two schemas which are using the same tablespace. While importing the second schema i got the following error while for the first one worked perfectly.
IMP-00017: following statement failed with ORACLE error 12705:
"ALTER SESSION SET PLSQL_COMPILER_FLAGS = 'INTERPRETED' NLS_LENGTH_SEMANTICS"
" = 'BYTES' PLSQL_DEBUG = FALSE"
IMP-00003: ORACLE error 12705 encountered
ORA-12705: invalid or unknown NLS parameter value specified
IMP-00000: Import terminated unsuccessfullythe NLS_LENGTH_SEMANTICS is set as 'bytes' for the database.
I cannot figure out why this errot occured. Could anyone help what is causing this and how to correct it.
Thanks in advace
Muneer

You are right ..it is 'BYTE', but even after correcting it I am getting the same error. As i said earlier it is not giving any errors for another schema!!
Muneer

ORACLE error 1031 while importing java classes

Hello Guys,
We are seeing following errors while importing SYS/SYSTEM objects.
IMP-00017: following statement failed with ORACLE error 1031:
IMP-00003: ORACLE error 1031 encountered
IMP-00090: Unexpected DbmsJava error -1031 at step 6666 while creating JAVA CLASS "javax/swing/plaf/basic/BasicTreeUI$KeyHandl
er"
We are doing platform migration of Oracle Apps instance from Solaris to Linux using exp/imp.
These errors are same for numorous classfiles. Seems like some privileges are lacking but not sure what they are. If any of you had similar experiences before please share with us. We have an open P1 SR with Oracle running for almost 3 days but no solution yet ...
Thank you,
Aditya

Pl post your full versions of OS, EBS and database. Pl verify that you are following these MOS Docs
238276.1 - Migrating to Linux with Oracle Applications Release 11i
567703.1 - Debugging Platform Migration Issues in Oracle Applications 11i
HTH
Srini

ErrorI::000 while importing IDOC in IDX2

Hi,
While importing the IDOC metadata in IDX2 i am getting the error::000.
How to rectify that.
I have checked the port config,rfc connections butcannot identify any error.
any solutions to rectify?

Hi Saras,
plz control the SM59 destination. The modus is bullshit, you cant trust. Copy the destination and put your own user and log on remote to be shure. Then use the new destination temporary for the port to check, if you get the same error.
Additional check user authorisation at R/3. The user must have SAP_XI_IS_SERV_USER and a role including S_RFC (Activity Execute, RFC object EDIN, object type Function Group)
Regards,
Udo

Unknown error (-39) while Import CD

When I try to import a CD in iTunes 7 I get the following error message:
Error occured while converting the file "xxxx". An unknown error occured (-39).
Here is everything from CD Diagnostics:
Microsoft Windows XP Professional Service Pack 2 (Build 2600)
Dell Computer Corporation Latitude D400
iTunes 6.0.0.18
CD Driver 2.0.4.3
CD Driver DLL 2.0.3.2
LowerFilters: RegKill (2.3.0.1), Cdr4_xp (5.3.4.21),
UpperFilters: pwd_2k (5.3.4.59), Cdralw2k (5.3.4.21), GEARAspiWDM (2.0.4.3),
Video Driver: Intel(R) 82852/82855 GM/GME Graphics Controller\Intel(R) 82852/55 GM/GME Controller
IDE\DiskIC25N040ATCS05-0______________________CS4OA63A, Bus Type ATA, Bus Address [0,0]
USBSTOR\CdRomSAMSUNGCDRW/DVDSN-324BU102, Bus Type USB
Check the Windows Update website to verify that you have the latest service packs and patches for your OS. Service packs affect the performance of USB and firewire CD / DVD drives.
Current user is administrator.
D: SAMSUNG CDRW/DVD SN-324B, Rev U102
Audio CD in drive.
Found 15 songs on CD, playing time 73:59 on Audio CD.
Track 1, start time 00:02:00
Track 2, start time 03:19:55
Track 3, start time 06:38:35
Track 4, start time 09:28:72
Track 5, start time 12:27:00
Track 6, start time 16:55:40
Track 7, start time 19:31:65
Track 8, start time 23:21:65
Track 9, start time 26:39:50
Track 10, start time 30:57:47
Track 11, start time 34:20:20
Track 12, start time 36:48:17
Track 13, start time 39:55:60
Track 14, start time 42:29:70
Track 15, start time 45:46:07
Audio CD reading succeeded.
Get drive speed succeeded.
The drive CDR speeds are: 4 8 12 16 20 24.
The drive CDRW speeds are: 4 8 12.
Any ideas what is wrong?
I want to have my CDs on my IPOD!!!!!

I have updated my Intel Chipset drivers to the newest version. I removed my DVD region free software (RegKill).
And guess, it's still not working. Same error. Thats what CD Diagnostic looks like after the changes:
Microsoft Windows XP Professional Service Pack 2 (Build 2600)
Dell Computer Corporation Latitude D400
iTunes 6.0.1.3
CD Driver 2.0.4.3
CD Driver DLL 2.0.3.2
LowerFilters: Cdr4_xp (5.3.4.21),
UpperFilters: pwd_2k (5.3.4.59), Cdralw2k (5.3.4.21), GEARAspiWDM (2.0.4.3),
Video Driver: Intel(R) 82852/82855 GM/GME Graphics Controller\Intel(R) 82852/55 GM/GME Controller
IDE\DiskIC25N040ATCS05-0______________________CS4OA63A, Bus Type ATA, Bus Address [0,0]
USBSTOR\CdRomSAMSUNGCDRW/DVDSN-324BU102, Bus Type USB
Check the Windows Update website to verify that you have the latest service packs and patches for your OS. Service packs affect the performance of USB and firewire CD / DVD drives.
Current user is administrator.
D: SAMSUNG CDRW/DVD SN-324B, Rev U102
Audio CD in drive.
Found 12 songs on CD, playing time 75:58 on Audio CD.
Track 1, start time 00:02:00
Track 2, start time 05:01:02
Track 3, start time 08:23:50
Track 4, start time 12:42:17
Track 5, start time 17:00:47
Track 6, start time 21:47:25
Track 7, start time 25:57:52
Track 8, start time 30:29:20
Track 9, start time 34:34:67
Track 10, start time 39:20:27
Track 11, start time 42:57:72
Track 12, start time 47:43:47
Audio CD reading succeeded.
Get drive speed succeeded.
The drive CDR speeds are: 4 8 12 16 20 24.
The drive CDRW speeds are: 4 8 12.
Luckily I got iTunes running on my other XP x64 version after receiving the 64bit drivers from GEAR Software.
Any other ideas what could still be wrong? I know of an other machine (Dell Optiplex GX270 with W2kSP4) with the same error.

Error API0259 while Importing Processflow in to owb 11g

Similar Messages

Maybe you are looking for