ERROR: App Quota reached

I have been having problems today and have rebuilt my app many times. Just when I thought I had figured out where I was going wrong I got the error that my app quota has been reached. Is there a daily limited on how many apps you can build? I've done about 20!!

Yes, we do have a daily limit, and it is in fact about 20 What are you doing where you need to rebuild your app so many times? App builds are typically a rare occurrence.
If you send me a private message with your Adobe ID I can up your limit a bit, but again... why are you needing to do so many app rebuilds?
Neil

Similar Messages

How to limit servermgr_filebrowser to boot volume, to prevent 'Error getting quotas for volume'

Having a system with 1 boot drive and 15 backup drives, we do want to limit the server manager 'servermgrd' its 'servermgr_filebrowser.bundle' to retrieve/check the disk quota only on the boot volume ('/').
Because:
the backup drives are FAT formatted, which will fail every time with this error message: 'servermgrd: servermgr_filebrowser:Error:servermgr_filebrowser: Error getting quotas for volume /Volumes/I of type exfat'
the quota check is repeated every 2 hours (120 minutes), causing the log the be filled with these message and the drives to spin up 12 times a day (consuming more power than necessary and causing extra drive wear)
How can the server hard disk drive quotum check be limited to the boot volume only (not scanning for any other volume)?
And when that isn't possible, what is the correct way to completely disable servermgr_filebrowser?

Thank you Mark you are vary helpfull
Did you mean that (lower) by "bundle strategy"?
<cachestore-scheme>
<class-scheme>
<class-name>com.griddynamics.ticketon.app.dao.coherence.TicketCacheStore</class-name>
</class-scheme>
<operation-bundling>
<bundle-config>
<operation-name>store</operation-name>
<preferred-size>5000</preferred-size>
<auto-adjust>true</auto-adjust>
</bundle-config>
</operation-bundling>
</cachestore-scheme>
And if yes is it looks sense?
I mean by this, "send records to TicketCacheStore by 5000 per call " am i right?
I dropped delay to 10s and set factor to 0.5
Not coherece send me 5-20k records and cachestore handle whis successfuly.
But! By diferent means it may work longer sometimes, some lock in database for instance.
I want to find durable solution for the case, not only lower a chance i meet one.
Issuing heartbeat from cachestore looks best for me now.
I find that default guardian timeout is 65s and it is not looks as good idea to make it higher.

Runcluvfy.sh stage -pre crsinst: error Unable to reach any of the nodes

Hii all,
Well, I've gone through the pre-reqs for trying to install 11G clusterware on RHEL 5.3.
I'm to the point where i'm trying to run:
./runcluvfy.sh stage -pre crsinst -n node1 -verbose
I get this:
Performing pre-checks for cluster services setup
Checking node reachability...
Node reachability check failed from node "node1 ".
Check failed on nodes:
node1
ERROR:
Unable to reach any of the nodes.
Verification cannot proceed.
Pre-check for cluster services setup was unsuccessful on all the nodes.
I'm just wanting right now, to install a one node RAC system (I will add servers later as I get them online).
I've verified that ssh is working (thinking it may be trying to connect to itself by ssh). I have the keys generated and installed...if I connect ssh as the oracle user back to the same machine, it gets me right on with no prompts for passwords.
nslookup on node1 looks great.
This box has 2 cards....eth0 and eth1. Right now in the /etc/hosts file, I have node1 to the IP for eth0, and node1-priv set for the IP address eth1.
I do have a little trouble understanding what the node1-vip is supposed to do or be set. I found the an IP address one higher than for eth0 wasn't being used, and set node1-vip to be that.
(Can someone explain to me a little more about the vip host?? Is it supposed to somehow point to node1's IP address on eth0 like the regular one does?)
Since this is a one box, one node install...hoping clusterware and checks are just looking at the /etc/hosts file. I've tried playing around, and setting node1-vip to be the same as node1 (IP)...that doesn't work either.
One thing I can guess 'might' be wrong. Does runcluvfy use "ping"? I found the oracle user cannot ping this box from this box. The box (node1) can be pinged from outside the box...it is registered on DNS, I can ssh into it no problem, and again, oracle can ssh into himself on same box with keys properly generated).
I've been looking around, and I just don't see much of what to look at to troubleshoot with this error, I guess everyone gets past the verification the first time with no host unreachable errors?
I'm a bit weak when it comes to networking. Any help greatly appreciated...suggestions, links...etc!!
cayenne

Ok...looks like this was the problem. It appears the SA's, per newer policy, had turned off "ping" for any other user on the box besides root.
I took a shot in the dark, and had them turn it on (as that ssh'ing and other items to check seemed to work outside the runcluvfy script). They turned on ping. The nodes from the script are now reachable and test positive for equivalency.
Performing pre-checks for cluster services setup
Checking node reachability...
Check: Node reachability from node "node1"
Destination Node Reachable?
node1 yes
Result: Node reachability check passed from node "node1".
Checking user equivalence...
Check: User equivalence for user "oracle"
Node Name Comment
node1 passed
Result: User equivalence check passed for user "oracle".
Pre-check for cluster services setup was unsuccessful on all the nodes.
I"m guessing that last line...was due to not having the clusterware running on any other boxes?
Anyway, will try to config. RAC, and get things installed.

Create accounting error :APP-SQLAP-100000, ora-00000

afer validate the AP credit memo. create accounting occured the error as below
the first form 'NOTE :create accounting successfully'
the secone form 'ERROR APP-SQLAP-10000:.........(x_rowid=AAAAHTUAAXAABIDYAA,X_invoice_id= 34345 ,ap_in:normal, successful completion : after callling AP_ETAK_SERVERICE_PKG,sysnchronize_for_doc_sep ()))'

Please see these docs.
Invoice Apparoval Throws Error App-Sqlap-10000 Ap_etax_services_pkg.Synchronize_for_doc_seq [ID 1158523.1]
When Cancelling An Invoice User Receives Error APPSQLAP-10000 ORA-00000 normal, successful completion occured in AP_INVOICES_PKG.UPDATE_ROW [ID 886316.1]
Error When Canceling Invoices APP-SQLAP-10000 AP_ETAX_SERVICES_PKG [ID 974712.1]
Thanks,
Hussein

Error app 523 reset on bb flip

I got the error app 523 on my bb flip like 20 times in everyday what can i do? I erase al programs and reinstall everything again and nothing and sometimes i get the error app 200 too im so angry with bb

Hi and Welcome to the Forums!
Here is the KB that discusses AppError 523:
KB16178 App Error 523
It is unfortunately a known problem...
And here is the KB that discusses App Error 200:
KB14115 APP Error 200 Reset
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Audit Error - File Maximum Reached

Hi,
We have recently complete a migration from non-unicode MS SQL to unicode Linux Oracle. Upon completion of the migration, the auditing failed. Under SM19, Dynamic Configuration tab, it is showing error 'File Maximum Reached' under the server status.
I have checked the space and permission for the audit log folder. I have also increased the rsau/max_diskspace/local, rsau/max_diskspace/per_file and rsau/max_diskspace/per_day parameter. Non of these work.
Does anyone knows the solution or guide me to the location where the error logs for audit are stored?
Thanks.

Thanks for providing those information. But I do not want to delete my audit logs, the disk space is sufficient for keeping the logs. I have also previously adjusted those profiles parameters to a high enough value.
My major problem is the audit is not working. And it is throwing the error 'file maximum reached'.
Any kind souls can advice me on how to fix this problem? All suggestions are welcome.

JCO error partner no reached

Hello experts,
I want to connect external java applications with my ERP 6.0 (ABAP stack).
The JCO connector soft is installed in a separate server from SAP application server.
When i try to establish the connection the result is:
[10 jul 2008 10:41:42,016 INFO] - SAPConnectionManager connectSAP: Inicio
[10 jul 2008 10:41:42,016 INFO] - SAPConnectionManager connectSAP: mshost:10.1.8.77
[10 jul 2008 10:41:42,016 INFO] - SAPConnectionManager connectSAP: r3name:T01
[10 jul 2008 10:41:42,016 INFO] - SAPConnectionManager connectSAP: group:BILBIDE
[10 jul 2008 10:41:42,018 ERROR] - SAPConnectionManager connectSAP: ERROR Connecting to SAP [Connect to SAP gateway failed
Connect_PM GWHOST=127.0.0.1, GWSERV=3300, ASHOST=127.0.0.1, SYSNR=00
LOCATION    CPIC (TCP/IP) on local host
ERROR       partner not reached (host 127.0.0.1, service 3300)
TIME        Thu Jul 10 10:41:42 2008
RELEASE     640
COMPONENT   NI (network interface)
VERSION     37
RC          -10
MODULE      nixxi_r_mt.cpp
LINE        8588
DETAIL      NiPConnect2
SYSTEM CALL SiPeekPendConn
ERRNO       111
ERRNO TEXT Connection refused
COUNTER     11
Anyone knows how can be the problem?
Thank in advance, i will give a lot of points!!
Regards
Carlos

Hi,
This is related to your connectivity. Please check it your connection status or getway setting.
Regards,
Anil

TS4002 I get quota reached when trying to send mail

How do I cure quota reached message on my iPhone 5?

Could it be one of the following...
1. your max number of mb 3g usage with your carrier is reached
2. your max mb of storage in icloud is reached
There is also a quota on the number of emails you can send in one day. Have you been mass mailing emails?

RECEIPT APPLICATION ERROR: APP-FND-00531

제품 : FIN_AR
작성날짜 : 2003-11-18
RECEIPT APPLICATION ERROR: APP-FND-00531
========================================
PURPOSE
Receipt Application 시 발생하는 error를 효과적으로 해결한다.
Problem Description
Applications 11.0.3:
Transaction을 생성 한 후 Receipt 과 Apply 할 때 다음과 같은 error 가 발생하였다.
APP-FND-00531 Amount Cannot Be Correctly Formatted
The Amount XXX.XXX Could Not Be Formally Formatted.
The Correct Format Is 999.99 And -999.99
Workaround
1. 해당 data 를 bakcup 받아 놓는다.
2. 다음 update script을 수행한다.
Update ar_payment_schedules_all
set amount_due_original = round(amount_due_original,2),
amount_due_remaining= round(amount_due_remaining,2),
acctd_amount_due_remaining = round (acctd_amount_due_remaining, 2)
where customer_trx_id=xxx
update ra_customer_trx_lines_all
set extended_amount=round(extended_amount,2)
where customer_trx_id=xxx and line_type='TAX'
update ra_cust_trx_line_gl_dist_all
set amount=round(amount,2)
where customer_trx_id=xxx
Solution Description
Applications 11.0.3에서 Tax / Freight Defaultation Program이 rounding 처리를 잘 못하여 ra_cust_trx_line_gl_dist_all 에 데이타가 corrupted 된 것으로 보인다.
잘 못된 data를 rounding 처리하여 저장해준다.
Reference Documents
Note 247018.1

Hi,
Please post ur question properly with details like o/s ebiz version etc etc and whn ur encountering this issue and.... not like just u did
follw this thread
Error APP-FND-01516 INVALID APPLICATION USERNAME, PASSWORD, OF DATABASE of Hussein
Regards

Error app 606 reset.

my torch suddenly got white blank screen with message said "error app 606 reset" unfortunatelly I can find out what is my software version and the platform is because the black screen on it.. The pc which I have instal Desktop is crash ( out of service) also lost my Software CD. What should I do? where I can find the firmware software to instal the Blackberry desktop to my other computer? is there any way else I can find out the latest version on my torch ? or im not sure which one on my torch : software (asia) or (multi language) what i can say I purchased this phone in Australia. ( I still have the box which have all details on the side of it e.g: imei, BT MAC, bundle 695. model and say made in mexico ) Pleassseee heelp as i really need this phone work again as there is so many pic and videos and else on it thanks..

Hello hjb_07
You can use that OS.Just follow the steps below:
You will need a PC, an internet connection, your BlackBerry Device and your device usb cable to implement all this.
This is how i upgrade my BlackBerry and ill make this simple and straight forward as possible.
1. Uninstall first any BlackBerry software that you previously installed on your PC, as it may and will conflict with the guide
2. Download BlackBerry Desktop Manager and install it.
3. Download your specific and latest BlackBerry device OS or any other official BlackBerry software download page and install it.
Official BB OS download portal:
http://us.blackberry.com/support/apps-and-software/desktop-and-device-download-sites.html
Note: If the OS that you are downloading is from your official carrier, skip step 4, if you got it from other carriers – read on brother.
4. Change your folders option to show hidden files/folders (Click My Computer > Organize > Folder and search options > View tab > click "Show hidden files, folders, and drives"
Search your C: drive for Vendor.xml and delete them, else you can look for the two vendor.xml manually thru
- Go to C:\Program Files\Common Files\Research In Motion\AppLoader and delete Vendor.xml. (If you are running 64-bit Vista or Windows 7, the path will be C: > Program Files x86 > Common Files > Research In Motion > AppLoader)
- On Windows Vista/7 navigate to C:\Users\YOUR_USER\AppData\Roaming\Research In Motion\BlackBerry\Loader XML (Where "YOUR_USER" is your username) – On Windows XP navigate to C:\Documents and Settings\YOUR_USER\Application Data\Research In Motion\BlackBerry\Loader XML (Where "YOUR_USER" is your username)
5. Go to C:\Program Files\Common Files\Research In Motion\AppLoader. (If you are running 64-bit Vista or Windows 7, the path will be C: > Program Files x86 > Common Files > Research In Motion > AppLoader) double click Loader.exe.
Thanks.
Good luck!
Please thank those who help you by clicking the button.
If your issue has been solved, please resolve it by marking "Accept as Solution"

AR Transaction Create Accounting Error APP-AR-96282

HI Everyone,
I need some urgent help.
I can't create online accounting of AR transaction because of Error: APP-AR-96282.
Autoaccounting has generated distributions for invoice properly & invoice is complete. Online Create accounting & even Accounting process is not able to generate accounting.
I couldn't find any related material on metalink as well. Can anyone provide help ?
Regards,
Fahd
Edited by: Fahd Khan on Aug 17, 2010 5:06 AM

also doesn't produce any output or list any error.Check http://www.orafaq.com/node/2245
Even it doesn't pick the transactions for accounting. Just receipts are getting accounted by Create Accounting program.Have you passed 'Receipts' for the Process Category parameter? If yes, leave it blank.
Get AR Diagnostics Test Collection for that transaction and check whether the xla_transaction_entities / xla_events are proper.
What is the event_status_code and process_status_code for event in xla_events?
By
Vamsi

See Inventory Organization Hierarchy, getting error APP-PER-50022

Hi friends
i need to see Inventory Organization Hierarchy. whenever i click Hierarchy in Inventory responsibility i get error APP-PER-50022. It says
Oracle Human Resource could not retrieve a value for the user type profile option. Please ensure it is it set property for your responsibility.
i have System Administrator responsibility. pls tell me what to do.
thanks in advance

Pl set the profile option "HR : User Type" - see MOS Doc 604432.1 (Error while setting up Inventory Organization)
HTH
Srini

When I try to use firefox, I get the this message: error: App:Name not specified in application.ini

I cannot access firefox 0n my other computer. I just get this error message: error:App:Name not specified in application.ini

This is most likely caused by Zone Alarm software. Please check http://support.mozilla.com/en-US/questions/880170

When i create a new bank statement i get this error APP-FND-01728:As Assig

dear,
When I try to create new statement bank in cash management i get this error APP-FND-01728:As Assignment does not exit for
these parameters
Busniess Impact : Each Bank Statement I create Does Not Take Any Document Number
Facts :
a-Set profile option Sequential Numbering: Partially Used
thanks

Hello
If you do not have already a Sequence created you may need to go to Application/Document/Define and create a sequence that will give each statement an unique number.
You need to create Document Categories for the Cash Management application using the name of your Bank Account (as System Administrator navigate to Application/Document/Categories). The table name is CE_STATEMENT_HEADERS_ALL. Then assign the Categories to the proper SOB (navigate to Application/Document/Assign).
Hope this helps
Octavio

MRP ERROR APP-MRP-22064

HELLO,
Run MRP ,it takes error
APP-MRP-22064: An internal error has occurred (mrlcup_calculate_use_up_date，2)
how to deal it?
thanks

Hi;
What is your OS and EBS?
You may hit below bugs:
Bug 2777633: MRCNEW ERRORS WITH APP-MRP-22064: MRFGRQ_FLUSH_GROSS_REQUIREMENTS, 2 G
https://support.oracle.com/CSP/main/article?cmd=show&type=BUG&id=6744149&productFamily=Oracle
Bug 3049212: MEMORY BASED PLANNER CREATES ENORMOUS LOG FILES WITH DEBUG ACTIVATED
https://support.oracle.com/CSP/main/article?cmd=show&type=BUG&id=3049212&productFamily=Oracle
Bug 9326976: MRCNEW ERROR APP-MRP-22064 AN INTERNAL ERROR HAS OCCURRED (MRPDM_PASS_DEMAND, 35
https://support.oracle.com/CSP/main/article?cmd=show&type=BUG&id=9326976&productFamily=Oracle
Regard
Helios

ERROR: App Quota reached

Similar Messages

Maybe you are looking for