Error appearing while transferring products from CRM to R/3.

Hi All,
I am facing a problem in CRM system while transferring products from CRM to R/3. System is throwing a message "Exception condition NO_STRUCT_DEFINITION raised" and product transfer is not happening.
Please suggest some solution.
Thanks & regards,
Rupam.

Hi Arup,
Thanks for your assistance once again.
I have checked the 'CRMRFCPAR' table entries in R/3 system. One entry with 'Send XML=M' is present in that table.
No error Bdoc exists in system, the existing Bdocs are showing as successfully processed in the transaction 'SMW01', The queue name corresponding to the Bdoc is 'CRM_PRODUCT_IP'.
I have also checked the transaction 'GENSTATUS' .There is no object with status red, instead of that two objects are existing with green status.
Can you please tell me how to verify, whether parent object ('DNL_CUST_PROD0') has been successfully loaded or not?????
Eagerly waiting for your valuable suggetions.
Thanks & regards,
Rupam.
Edited by: rupamsap on Mar 19, 2010 9:46 AM

Similar Messages

  • Hi this message appears after 2 hours downloading Mavericks : an error occurred while extracting files from the package "mzps4135638417199433253.pkg"

    Hi this message appears after 2 hours downloading Mavericks in App Store :
    an error occurred while extracting files from the package "mzps4135638417199433253.pkg"
    Same with "CMD + R"
    Help...

    It sounds to me like your Internal Hard Drive is failing.
    I recommend you buy a new one, that is a good candidate for replacing the old one, but install it in an External enclosure and Install a fresh Mac OS X on it from the DVD. You can boot your Mac from any attached drive.
    The new System can be used to get some work done, check your emails, and takes the pressure off resolving this immediately. You can also attempt to salvage files off the old drive if needed.
    Once things seem to be working, then move the new drive inside the computer. Failures at this point may be due to bad cable, which has been a problem in some of these MacBooks.
    Use security erase, write Zeroes, one pass, to re-write every block on the old drive. Any block discovered to be bad will be replaced with spares the drive holds in reserve for this purpose. If more than 10 blocks are pared on one pass, "Initialization Failed!" will be the result. Although you can try the erase again, there is some question whether you want to trust this drive with your precious data.

  • Error in subroutine READ_NAMTB while transferring data from HCM to xRPM.

    Hi Guys,
    I am facing a problem while transferring data from HCM to xRPM via ALE.
    We are getting the error " Error in subroutine READ_NAMTB" during the Inbound Processing of Idocs in xRPM.
    We have used the standard message type HRMD_ABA and IDoc type HRMD_ABA04 without any modifications.
    Request you all to kindly let me know the solution to fix this issue asap.
    Thanks in advance,
    Punkuj..

    It was a bug in SP2, it is fixed in SP2 Patch 4.
    Cheers !!
    Zaheer

  • Error while transferring materials from R/3 to APO

    I am getting an error while transferring materials from R/3 to APO , the error is on the SCM side and its "NOEXEC"  , the inbound queue has been blocked . what might be the problem

    Hi Raj,
    I think that you have RFC problems, you need to check this with your basis team, i give you a thread that talks about the same problem.
    Regards.
    Marí

  • Get "An Error occurred while retrieving data From ProjectWebApp.." when searching content on an External Content Type

    I have set-up an ECT in SPD2013 on SP2013.  It is a SQL Data source called ProjectWebApp.   I have BCS/SSS set-up.  I can create an ECT OK in SPD.  I can add the ECT to a custom list.
    The problem is when I add a new item in the list the following error message appears in red
    An error occurred while retrieving data from ProjectWebApp. Administrators, see the server log for more information
    I cannot filter or return any results.  There is data in the DB.
    Another test I do is to try and create a new App/List using the "External List" template.  When
    I select the ECT a red message appears "External Content Types are not available".  which is odd since I can add an ECT to a list as mentioned above.
    Any ideas?
    Tx
    Andrew
    Andrew Payze

    Hi Andrew,
    Please try the option Allow unlimited length in document libraries in the column settings:
    http://littletalk.wordpress.com/2011/08/18/external-content-type-an-error-occurred-while-retrieving-data-from-a-system-administrators-see-the-server-log-for-more-information/
    If it doesn't help, please refer to the link below and raise the External content type Read List operation thresholds:
    http://lightningtools.com/bcs/business-connectivity-services-end-user-implications-part-one-threshold-limit-errors/
    Please provide error message in ULS log for further troubleshooting.
    Regards,
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected] .
    Rebecca Tu
    TechNet Community Support

  • An error occurred while running scripts from the package "mzm,stuhjljp.pkg".

    I hope someone can help, I have now tried downloading Lion OSx 4 times and I keep getting this message: An error occurred while running scripts from the package "mzm,stuhjljp.pkg".
    I go back to the app store and it kindly tells me it's installed. It's not quite simply it is nowhere to be found.
    Nice one Apple for moving away from those reliable discs and causing pain, wasted productivity and a **** of a lot of frustration. $29.99 to annnoy the **** out of me, thanks.
    Anyone have a solution that may be of assistance.

    Mj, I can't offer much help but you may be able to use this method to "find" Lion OS X in the App Store again.
    Hold down the "option" key while clicking on the App Store icon.  Keep holding down the option key, then click on the "Purchased" tab at the top of the page. 
    With any luck the button to the right of Lion OS X will now say "install."
    I'm having a similar problem reinstalling Lion, so don't be surprised if you try to reinstall and get the same error.
    Good luck,
    Contender

  • "An error occurred while extracting files from the package "BaseSystem.pkg".

    Hello!
    I have a
    MacBookPro5,5
    Prozessortyp:Intel Core 2 Duo
    Prozessorgeschwindigkeit:2.26 GHz
    Anzahl der Prozessoren:1
    Gesamtzahl der Kerne:2
    L2-Cache:3 MB
    Speicher:2 GB
    Busgeschwindigkeit:1.07 GHz
    Boot-ROM-Version:MBP55.00AC.B03
    SMC-Version (System):1.47f2
    Hardware-UUID:A2DD27C4-9829-5A4D-854B-485EF8A6B20F
    Problem:
    I upgraded Leopard to Snow Leopard. Everything worked fine for a month. To free up disk space I deleted some of the iPhoto flders (modfied and original images). Everything worked still fine. Shut down the computer. Next day it was incredibly slow. At the same time the indexing was running. I stopped indexing, but stll slow. Every operation took minutes. I tried all the tricks that I found in the internet (repaired file permissions, repaired disk, cleared PRAM , moved big filed from desktop, etc.). After 24 full hours of trying all this I decided to erase the hard drive and reinstall, directly from the Snow Leopard Install disk, but it fails after downloading the packages. Below is the part of the log. Then I tried to use the old Leopard install DVD to reinstall Leopard, it then sais estimated time 12 hours or so and eventually crashed, spitting out a lot of "reportcrash" in the log. What is going on? I'm running out of options. Any advice? Would zeroing the hard drive help? If nothing else I plan to buy a new hard drive, since the only explanation I have is that there is a problem with the hard driven although the disk utility says it is OK. I need a bigger one anyway. Any ideas? Thank you!
    Aug 16 05:17:31 localhost OSInstaller[139]: IFPKInstallElement (191 packages)
    Aug 16 05:17:35 localhost OSInstaller[139]: PackageKit: ----- Begin install -----
    Aug 16 05:17:35 localhost OSInstaller[139]: PackageKit: request=PKInstallRequest <191 packages, destination=/Volumes/Macintosh HD>
    Aug 16 05:17:36 localhost OSInstaller[139]: PackageKit: Extracting /Volumes/Macintosh HD/Mac OS X Install Data/BaseSystem.pkg (destination=/Volumes/Macintosh HD/.OSInstallSandbox-tmp/Root, uid=0)
    Aug 16 05:31:59 localhost Unknown[80]: /SourceCache/AppleFSCompression/AppleFSCompression-24.0.1/Common/DataPool.c:116 : Error: finished pool without filling it
    Aug 16 05:31:59 localhost Unknown[80]: /SourceCache/AppleFSCompression/AppleFSCompression-24.0.1/Common/commonUtils.c: 315: Error: fh_pread -1
    Aug 16 05:31:59 localhost Unknown[80]: /SourceCache/AppleFSCompression/AppleFSCompression-24.0.1/Common/StreamCompress or.c:236: Error: write failed for /Volumes/Macintosh HD/.OSInstallSandbox-tmp/Root//System/Library/Frameworks/OpenCL.framework/Versi ons/A/Resources/runtime.amdil.bc: Invalid argument
    Aug 16 05:31:59 localhost Unknown[80]: /SourceCache/AppleFSCompression/AppleFSCompression-24.0.1/Common/StreamCompress or.c:260: Error: futimes failed for /Volumes/Macintosh HD/.OSInstallSandbox-tmp/Root//System/Library/Frameworks/OpenCL.framework/Versi ons/A/Resources/runtime.amdil.bc: Invalid argument
    Aug 16 05:31:59 localhost Unknown[80]: /SourceCache/AppleFSCompression/AppleFSCompression-24.0.1/Common/StreamCompress or.c:829: Error: returning errno 22 from FinishStreamCompressorQueue
    Aug 16 05:32:10 localhost OSInstaller[139]: PackageKit: Install Failed: PKG: extracting "com.apple.pkg.BaseSystem"\nError Domain=PKInstallErrorDomain Code=110 UserInfo=0x12c8366a0 "An error occurred while extracting files from the package “BaseSystem.pkg”." Underlying Error=(Error Domain=BOMCopierFatalError Code=22 UserInfo=0x12e703300 "The operation couldn’t be completed. FinishStreamCompressorQueue error") {\n    NSFilePath = "/Volumes/Macintosh HD/.OSInstallSandbox-tmp/Root";\n    NSLocalizedDescription = "An error occurred while extracting files from the package \U201cBaseSystem.pkg\U201d.";\n    NSURL = "BaseSystem.pkg -- file://localhost/Volumes/Macintosh%20HD/Mac%20OS%20X%20Install%20Data/index.pro duct";\n    NSUnderlyingError = "Error Domain=BOMCopierFatalError Code=22 UserInfo=0x12e703300 \"The operation couldn\U2019t be completed. FinishStreamCompressorQueue error\"";\n    PKInstallPackageIdentifier = "com.apple.pkg.BaseSystem";\n}
    Aug 16 05:32:10 localhost OSInstaller[139]: install:didFailWithError:Error Domain=PKInstallErrorDomain Code=110 UserInfo=0x12c8366a0 "An error occurred while extracting files from the package “BaseSystem.pkg”." Underlying Error=(Error Domain=BOMCopierFatalError Code=22 UserInfo=0x12e703300 "The operation couldn’t be completed. FinishStreamCompressorQueue error")
    Aug 16 05:32:11 localhost OSInstaller[139]: Install failed: Die Installation ist aufgrund eines Fehlers fehlgeschlagen. Wenden Sie sich an den Hersteller der Software.
    Aug 16 05:32:13 localhost OSInstaller[139]: Allowing machine sleep.
    Aug 16 05:32:15 localhost OSInstaller[139]: Memory statistics for 'Installation ist fehlgeschlagen' pane:
    Aug 16 05:32:15 localhost OSInstaller[139]: Physical Memory Allocation:   139 MB wired,   259 MB trapped,   397 MB active,     7 MB inactive,  1246 MB free,  1650 MB usable,  2048 MB total

    It sounds to me like your Internal Hard Drive is failing.
    I recommend you buy a new one, that is a good candidate for replacing the old one, but install it in an External enclosure and Install a fresh Mac OS X on it from the DVD. You can boot your Mac from any attached drive.
    The new System can be used to get some work done, check your emails, and takes the pressure off resolving this immediately. You can also attempt to salvage files off the old drive if needed.
    Once things seem to be working, then move the new drive inside the computer. Failures at this point may be due to bad cable, which has been a problem in some of these MacBooks.
    Use security erase, write Zeroes, one pass, to re-write every block on the old drive. Any block discovered to be bad will be replaced with spares the drive holds in reserve for this purpose. If more than 10 blocks are pared on one pass, "Initialization Failed!" will be the result. Although you can try the erase again, there is some question whether you want to trust this drive with your precious data.

  • HT1222 hi i have a apple imac 27 2009 and i have purchased mountain lion but near the end it says An error occurred while running scripts from the package "mzps6175750011235388779.pkg"

    hi i have a apple imac 27 2009 and i have purchased mountain lion but near the end it says An error occurred while running scripts from the package “mzps6175750011235388779.pkg”
    can you please advise me what should i do to fix this

    Some ideas.
    https://discussions.apple.com/message/20034600#20034600

  • Replication of Enhanced Products from CRM to R/3

    Hi,
      I have downloaded the R/3 Material from R/3 to CRM.
    Now I have made changes in that product in CRM i.e I have added some attributes in CRM Product Master.
    Now,Is it possible to replicate that enhanced product from CRM back to R/3.
    If yes,Can you please explain me as to how I do it in Middleware???
    Very Urgent
    Regards
    Puneet

    Hi,
    CRM to R/3 replication is not possible for products but only for IBASES. you will have to enhance the material master in ECC and then replicate the custom data to CRM in enhanced fields. that is possible but from CRM to ECC i am afraid is not !
    Thanks
    Sudhir Grover

  • Error occurred while solution import in crm 2013

    Hi,
    I have unmanaged solution now I am importing solution in another organization there is some error occurred while importing solution in crm 2013. Please tell me how to solve this issue

    Have you done any manual edit of Solution XML?
    Can you share error logs and server traces if available?

  • How do I recover my contact list which I lost while transferring it from iPhone 3GS to windows address book via iTunes, How do I recover my contact list which I lost while transferring it from iPhone 3GS to windows address book via iTunes

    How do I recover my contact list which I lost while transferring it from iphone3gs to windows address book.

    Did you try and sync it with an address book on your computer that contained no entries at all?  If so, then they are gone.
    IF you backed up the phone before trying to do this, you may be able to recover some of the information using 3rd party software to try and extract it from the backup. I have no personal experience with any of these programs, so I'll leave specific recommendations to others who do.

  • HT201269 while transferring data from iphone 3GS to iphone 4S SMS details are not getting transferred.

    While transferring data from old iphone 3gs to new iphone4s through itunes the data in messages is not getting transferred.

    @ melfromvictoria
    Have you tried right clicking on the 4s and select "restore from back up"

  • Need solution for the following sync error: "iTunes could not sync calendars to the iPad "iPad name" because an error occurred while sending data from the iPad"

    Need solution for the following sync error: "iTunes could not sync calendars to the iPad "iPad name" because an error occurred while sending data from the iPad"

    I want to add that I deleted all the old back-ups and created a new back-up without any issues except sync problem.

  • "...an error occurred while sending data from the iPhone" - caused by latest iPhone update today?

    I've been syncing my iPhone to my (non-apple) desktop for several months without difficulty.
    Today I accepted the latest upgrade to my iPhone software.
    Since it installed, it will not sync.
    It gives the error message "iTunes could not sync calendars to the iPhone "Steve's iPhone" because an error occurred while sending data from the iPhone."  After rebooting the desktop, the error repeats, and it's now in hour 2 of the continuing message "Syncing Steve's iPhone (Step 2 of 2) - Finishing sync"
    Has anyone else run into this Undocumented Feature of the latest upgrade?
    As bugs go, this is pretty serious for those of us who depend on syncing the iPhone and desktop for our business!
    Thanks to anyone who can help!
    Steve Callender

    Tried rebooting the phone, and now it works.
    Guess there's 2 lessons here -
    Boot again when installing new SW, even if the phone reboots itself during installation, and
    Boot to see if that fixes a problem before posting it.
    Steve

  • HT1473 Im having problem while transferring songs from PC to Ipod. Ive followed all steps 'File Add to Library' but i cant find songs in my ipod. Ive also synced the ipod and backup as well but still same. what to do?

    Im having problem while transferring songs from PC to Ipod. Ive followed all steps 'File<Add to Library' but i cant find songs in my ipod. Ive also synced the ipod and backup as well but still same. what to do?

    Try:
    iTunes: Finding lost media and downloads
    iTunes: How to re-create your iTunes library and playlists
    Next try:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store
    Also:
    Recovering your iTunes library from your iPod or iOS device: Apple Support Communities

Maybe you are looking for