Error appears when Upgrading from 11.1.1.3 to 11.1.1.4

Hi All,
We've Installed Hyperion 11.1.1.3 and would like to go for 11.1.1.4. We've applied the maintenance release 11.1.1.4. After the installation when trying to open EPM System Configurator, it is giving the below error message
Java.exe-Entry point not found, The procedure entry point NETInetAddressToSockaddr@24 could not be located in the Dynamic Link Library net.dll
Pls. advice
Thanks,
PVR

Hello,
Test to set the PATH before launching rwserver :
example:
set ORACLE_HOME=e:\oracle\ods1012
set PATH=%ORACLE_HOME%\bin;%ORACLE_HOME%\jdk\jre\bin;%ORACLE_HOME%\jdk\jre\bin\classic;%ORACLE_HOME%\jdk\jre\bin\classic;%ORACLE_HOME%\jlib;%ORACLE_HOME%\jdk\bin
rwserver server=repsrvr batch=yes autostart=yes
Please let me know if it works.
Thanks,
KKT

Similar Messages

  • Error 1015 when upgrading from 3.0 to 3.0.1

    Hello,
    I recently purchased an iPhone and my first time connecting it to iTunes it asked to upgrade from 3.0 to 3.0.1, which I assumed was fairly standard so I let it go.
    However, it made it about 75% through the progress bar on the iPhone display and to the "restoring iPhone firmware" stage in iTunes, then it gave the 1015 error. I have tried it on several computers since then and it happens every time regardless of which computer/OS I use.
    After this every time I turn the iphone on, connect to the computer or not, it displays a USB with an arrow to the iTunes icon, and I have no control. Basically nothing on it works anymore.
    When I searched on google I found a lot of hits for people trying to downgrade/jailbreak, neither of which I was trying to do, I was simply upgrading based on iTunes request.
    Thanks for any help, right now my iPhone is useless to me, and it's really frustrating.
    Thanks,
    Boyd

    I just got this link off Apple Support. It is a KB article that describes issues with that particular error code. Try and see if that solves your problem.
    http://support.apple.com/kb/TS1275

  • Encountered error 6  when upgrading Iphone 5s from 7.1.2 to 8.3

    I encountered error 6  when upgrading Iphone 5s from 7.1.2 to 8.3
    I've tried upgrade iphone on three computers , the results are all the same.
    One of the computers successfully upgrade my ipad to 8.3.
    There are 2GB left on IPhone 5S before I perform the upgrade.
    It should be enough for iTunes to finish the process, right?
    But in the log, it says  "copier_file_error: /mnt2/mobile/Library/PreinstalledAssets/com_apple_MobileAsset_Font.cpio: No space left on device"
    why is that?
    Any way for me to continue the upgrade?  it seems it's almost done.
    Thank you
    the end of the log  is as below:
    [10:36:29.0714] Could not find libAppleSWDHIDFlashUpdater.dylib
    [10:36:29.0714] entering fixup_var
    [10:36:29.0714] entering update_var_directory_hierarchy
    [10:36:29.0714] replace_data_partition_path: moving /mnt1/private/var/mobile/Library/PreinstalledAssets to /mnt2/mobile/Library/PreinstalledAssets
    [10:36:29.0714] copier_file_error: /mnt2/mobile/Library/PreinstalledAssets/com_apple_MobileAsset_Font.cpio: No space left on device
    [10:36:29.0714] copy /mnt1/private/var/mobile/Library/PreinstalledAssets to /mnt2/mobile/Library/PreinstalledAssets failed: 0x2
    [10:36:29.0714] unable to copy directory: 2
    [10:36:29.0714] failed to replace path mobile/Library/PreinstalledAssets: 2
    [10:36:29.0714]
    [10:36:29.0714] ==== end of device restore output ====
    [10:36:30.0280] AMRAuthInstallDeletePersonalizedBundle
    [10:36:30.0421] <Restore Device <<<<<IMEI>>>>>>0>: Restore failed (result = 6)
    [10:36:30.0542] Restore completed, status:6
    [10:36:30.0542] Failure Description:
    [10:36:30.0542] Depth:0 Error:AMRestorePerformRestoreModeRestoreWithError failed with error: 6
    [10:36:30.0542]    Depth:1 Error:無法完成作業。（AMRestoreErrorDomain 錯誤 6 - Failed to handle message type StatusMsg）
    [10:36:30.0542]       Depth:2 Error:無法完成作業。（AMRestoreErrorDomain 錯誤 6 - failed to fixup var）

    Hello there, Kenduck.
    It sounds like you are trying to update your iPhone 5s to the most current version of iOS and are getting an Error 6 message. The following Knowledge Base article offers up some great information in regards to that very error message:
    Get help with iOS update and restore errors - Apple Support
    Particularly:
    Check your security software
    Errors: 2, 4, 6, 9, 1611, 9006.
    Sometimes security software can stop your device from communicating with either the Apple update server or with your device.
    Check your security software and settings to make sure that they aren't blocking a connection to the Apple servers.
    If you still see the error message, check for USB connection issues.
    Thanks for reaching out to Apple Support Communities.
    Kind Regards,
    Pedro.

  • Error ORA-03113 when upgrading from 11.2.0.1 to 11.2.0.3

    I keep on getting this error when upgrading from 11.2.0.1 to 11.2.0.3
    [Thread-57] [ 2012-04-20 13:18:28.207 CEST ] [SummarizableStep.genSummary:409]  Generating Summary for:=Pre Upgrade ,status is:=Successful
    [Thread-57] [ 2012-04-20 13:18:28.208 CEST ] [SummarizableStep.genSummary:409]  Generating Summary for:=Oracle Server ,status is:=Failed
    oracle.sysman.assistants.util.step.StepExecutionException: ORA-03113: end-of-file on communication channel
    Upgrade failed due to running the step "Upgrading Oracle Server"
            at oracle.sysman.assistants.dbma.backend.component.SubComponent.executeSubStepImpl(SubComponent.java:738)
            at oracle.sysman.assistants.dbma.backend.component.SubComponent.executeStepImpl(SubComponent.java:585)
            at oracle.sysman.assistants.dbma.backend.component.Component.executeStepImpl(Component.java:317)
            at oracle.sysman.assistants.dbma.backend.SummarizableStep.executeImpl(SummarizableStep.java:183)
            at oracle.sysman.assistants.util.step.BasicStep.execute(BasicStep.java:210)
            at oracle.sysman.assistants.util.step.Step.execute(Step.java:140)
            at oracle.sysman.assistants.util.step.StepContext$ModeRunner.run(StepContext.java:2708)
            at java.lang.Thread.run(Thread.java:637)
    [Thread-57] [ 2012-04-20 13:18:28.209 CEST ] [SummarizableStep.executeImpl:212]  Throwing exception e from SummarizableStep
    [Thread-57] [ 2012-04-20 13:18:28.209 CEST ] [BasicStep.configureSettings:304]  messageHandler being set=oracle.sysman.assistants.util.UIMessageHandler@4805e9f1
    oracle.sysman.assistants.util.step.StepExecutionException: ORA-03113: end-of-file on communication channel
    Upgrade failed due to running the step "Upgrading Oracle Server"
            at oracle.sysman.assistants.dbma.backend.component.SubComponent.executeSubStepImpl(SubComponent.java:738)
            at oracle.sysman.assistants.dbma.backend.component.SubComponent.executeStepImpl(SubComponent.java:585)
            at oracle.sysman.assistants.dbma.backend.component.Component.executeStepImpl(Component.java:317)
            at oracle.sysman.assistants.dbma.backend.SummarizableStep.executeImpl(SummarizableStep.java:183)
            at oracle.sysman.assistants.util.step.BasicStep.execute(BasicStep.java:210)
            at oracle.sysman.assistants.util.step.Step.execute(Step.java:140)
            at oracle.sysman.assistants.util.step.StepContext$ModeRunner.run(StepContext.java:2708)
            at java.lang.Thread.run(Thread.java:637)
    [Thread-57] [ 2012-04-20 13:18:31.000 CEST ] [CompManager.isModeSet:9822]   DB Upgrade Mode Setting := 1
    [Thread-57] [ 2012-04-20 13:18:31.001 CEST ] [CompManager.isModeSet:9823]   Mode := 1 is set
    [Thread-57] [ 2012-04-20 13:18:31.001 CEST ] [SQLEngine.done:2189]  Done called
    [Thread-57] [ 2012-04-20 13:18:31.001 CEST ] [Database.getStepSQLInterface:787]  OH in database: /app/oracle/product/11.2.0.3/db_1Any clues about what could be wrong? I am planning to upgrade with the manual steps if it does not work :(

    Pl post OS details - are you using DBUA to upgrade ? Are there any errors in the database alert log ?
    ORA-00600 [kodpunp-nulltds], ORA-00600 [kokeeiix1], [600] When Upgrading To 11GR2 [ID 1367827.1]     
    HTH
    Srini

  • Error 8288 when upgrading my first gen Ipod Touch to IOS 3.1.

    I am having some trouble trying to get IOS 3.1 on my first generation Ipod touch.  I have the latest Itunes, I do not have any dvd burning software like Anydvd that can interfere, and I've tried it on two different computers with no avail.  Any help is greatly appreciated.

    msoviolist, I opened a ticket via their so called "Express Lane" support page, I assume it'll take a couple of emails before they decide to credit you for the download. I would suggest linking to these two threads in the correspondence, this is what I included in the message;
    =========
    I've attached a couple of threads from the Apple support
    forums, it appears this is an ongoing problem for many folks trying to
    download the 3.1 upgrade for the 1st gen. iPod Touch, feel free to
    check them out;
    1) Error 8288 when upgrading my first gen Ipod Touch to IOS 3.1.
    https://discussions.apple.com/thread/3373167?start=0&tstart=0#
    2) How do I upgrade first generation touch software to 3.1.3
    https://discussions.apple.com/thread/3009667?start=0&tstart=0
    ==========
    Good luck...
    Message was edited by: SpanishClash

  • Error cannot use device the connected USB device requires too much power this error appeared  when I added my camera

    Error appeared when I connected my camera to iPad I used a camera connection device error  cannot use device t he connected USB device requires too much power
    Thanking you
    Wendy Banks

    Some cameras are designed to use the power suppled via USB when they're plugged into another device, usually a PC or laptop. The iPad does not supply sufficient power for a camera. The iPad Camera kit allows for either a camera to be plugged in only for the transfer of photos, not as a power sourse, or the removal of the SD Card from a camera so it can transfer photos as an alternative.

  • I keep getting error 2324 when upgrading to version 10

    I keep error 2324 when upgrading to version 10. Running win 7

    Try disabling anti-virus also. You can also download the updates (not upgrade that is AA XI) from http://www.adobe.com/support/downloads/product.jsp?product=1&platform=Windows. With the downloads, you typically have to install them in order. Only reboot after the last install.

  • How to transfer data & apps,When upgrading from a iPhone 3G to an iPhone 4 or soon 5

    When upgrading from a iPhone 3G to an iPhone 4 or soon 5
    How to transfer all phone number and apps and notes, pretty much copy my old iPhone to my new iPhone , all content and apps.
    Will it transfer my text messages also?
    Is this a nightmare or an easy task?

    Connect to iTunes and backup. Then when you receive the new phone restore from that backup.
    http://support.apple.com/kb/ht1766
    http://support.apple.com/kb/ht1414

  • Error message when copying from Acrobat Reader

    Error message when copying from Acrobat Reader - any file,  any time (Win 7, Adobe many versions until recent).
    Copy works, but causes a needless and useless error message that has to be clicked away every time.
    This problem is published on the web for a million times without a working solution. And even in the Adobe forum no qualified answer (http://forums.adobe.com/thread/441370)
    When can I expect a solution?

    "101 Views     0 Replies  
    Was this helpful?" 
    Of course not.
    But thank you anyway, I talked to my admin and we changed the whole company to Foxit.
    It can be that easy.

  • Error 3194 when upgrading to ios 7.

    I receive error 3194 when upgrading to ios7 on my iphone 4 ( and I really don't know if it is 4s or just 4).  I am working though the itunes softward on my home computer.  It seems I am stuck in something called recovery mode.  I have tried a variety of suggestions found on the web (e.g., editing a "host" file, checking firewalls and connectivity, etc.) to no avail.  Any suggestions?

    The iPhone was either previously jailbroken (the DFU restore should have fixed that) or it has a hardware error. I would vote for the latter.

  • Error message when changing from portrait to landscape when printing

    I receive an error message when changing from portrait to landscape when trying to print.  How do I resolve this issue?

    Hi hillclimbing,
    Can you please let me know the exact error message you see as that would be helpful.
    Does this occur with all the pdf files.
    What OS and Acrobat version are you using?
    Regards,
    Rave

  • When upgrading from OS X lion to OS X mountain lion will it automatically uninstall OS X lion

    when upgrading from OS X lion to OS X mountain lion will it automatically uninstall OS X lion?

    Yes. You download Mountain Lion from the App Store and, once the download is complete, the installation of Mountain Lion will begin. You can quit it at this point and backup the "Install OS Mountain Lion.app" (which I suggest) the double-click it and begin the installation.
    All remnants of Lion will be gone and you'll be running Mountain Lion.
    Good luck,
    Clinton

  • Error 51 when upgrading iphone 6 to ios 8.1.3.

    looks like the serial number is lost when preparing the phone for the update. can't be verified by apple servers. tried to restore. nothing; still not recognized. tried dfu, same result. basically, i have a large, expensive brick

    getting error 51 when upgrading iphone 6 to ios 8.1.3. sorry, i repeated myself

  • Best practice for Smartview when upgrading from Excel 2003 to Excel 2007?

    Does anyone know the best pratice for Smartview when upgrading from Excel 2003 to Excel 2007?
    Current users have Microsoft Excel 2003 with Smartview 9.3.1.2.1.003.
    Computers are being upgraded to Microsoft Excel 2007.
    What is the best pratice for Smartview in this situation?
    1. Do nothing with Smartview and just install Excel 2007.
    2. Install Excel 2007 and then uninstall and reinstall Smartview
    3. Uninstall Smartview, Install Excel 2007, and then install Smartview
    4. Somthing else??
    Thanks!

    We went with option 1 and it worked out fine. Be aware that SV processes noticeably slower in Excel 2007 than 2003. Many users were/are unhappy with the switch. We haven't tested SV v11 yet, so I'm not sure if it has improved performance with Excel 2007 or not (hopefully it does).

  • When upgrading from osx 10.7.4 to osx mountain lion I get the following Alert!  This update requires OS X version 10.8.

    When upgrading from osx 10.7.4 to osx mountain lion I get the following Alert!  This update requires OS X version 10.8.

    Sounds like you downloaded the 10.8.1 update instead of the Mountain Lion installer from the Mac App Store.
    You have to purchase Mountain Lion from the App Store to get to 10.8

Maybe you are looking for

  • How can I change the source directory in Netbeans

    Hi there, Thanks for reading. How can I change the source directory in Netbeans so I can have a src directory? Thanks, Lorenzo

  • BAPI for Changing Customer Details

    Hi Pls tell me how to use "BAPI_CUSTOMER_CHANGEFROMDATA1". When I'm filling all mandatory fields, its showing message- Make an entry in all fields where required. Regards.

  • Can't sync my Itunes through WIFI.

    I've tried troubleshooting from what Apple suggested, but no luck. I understand it has to have a power source (such as overnight charging), and I've tried that, but it says "sync will resume when "PC is available". I've tried it with iTunes up on my

  • Libmuxer error

    Hi, When I start my application in weblogic 7.0 SP4, I get the following exception. Any idea waht is missing inthe path or class path? Please ensure that libmuxer library is in :'/opt/java/j2sdk1_3_1_08/jre/bin/../lib/sparc/hotspot:/opt/java/j2sdk1_3

  • IMac Sleep issues

    i have noticed that recently my computer seems to be going to sleep all by itself (even though it is set to NEVER put the hard drive or monitor to sleep). It seems it always does this in the middle of me trying to burn a DVD, sometimes dozens of time