Error "Application not found" from SICF while trying to test WD service

Hi All,
I am getting an error as "Application not found" when i am trying to test my web dynpro component service from SICF.
This service is active as well.
But when i copied the same URL and pasted it in browser then my web dynpro component opened.
And i am able to open my web dynpro compoent from SE80 also.
Regards,
Amar

Hi All,
Is is related to browser, because i am using IE8.
But the only doubt i have is when i am pasting the URL in IE8 then it is loading the WD page.
Regards,
Amar

Similar Messages

UCM Log in error : Error 404--Not Found From RFC 2068 Hypertext Transfer Pr

i am not able to get ucm login page , admin and manage server is up and there is no error in logs . but iam getting below error in login page
Error 404--Not Found
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
10.4.5 404 Not Found
The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent.
If the server does not wish to make this information available to the client, the status code 403 (Forbidden) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through some internally configurable mechanism, that an old resource is permanently unavailable and has no forwarding address.

Hi ,
This is an indication that ECM cs.ear deployment has failed for some reason . To get the exact reason either check ucm_server1.log or start the server from command line and there the errors will be shown.
Copy the core part and post it .
Thanks
srinath

[SOLVED] error: target not found: from multiple applications

I wanted to install skype on my fresh arch OS. I tried with
sudo pacman -S skype
but I got:
error: target not found: skype
. Even though I can find skype here: https://www.archlinux.org/packages/mult … _64/skype/ on the arch website, I can't find it with pacman -S. This would be also a question ...
I downloaded the x86 package for my system, and used
sudo pacman -U skype-4.2.0.11-3-x86_64.pkg.tar.xz
, but ... I got this:
loading packages...
resolving dependencies...
warning: cannot resolve "lib32-qt4", a dependency of "skype"
warning: cannot resolve "lib32-alsa-lib", a dependency of "skype"
warning: cannot resolve "lib32-libxss", a dependency of "skype"
warning: cannot resolve "lib32-libxv", a dependency of "skype"
warning: cannot resolve "lib32-libxcursor", a dependency of "skype"
warning: cannot resolve "lib32-v4l-utils", a dependency of "skype"
:: The following package cannot be upgraded due to unresolvable dependencies:
skype
:: Do you want to skip the above package for this upgrade? [y/N]
I said ... ok, I will probably install pidgin, and install some kind of skype plugin, but now ... I tried to install teamviewer from AUR, with this command
sudo yaourt teamviewer
I choosed the second package which is the original teamviewer package not some kind of plugin, but ... I got this:
==> Edit teamviewer.install with: nano
==> Continue building teamviewer ? [Y/n]
==> ------------------------------------
==>
==> Building and installing package
==> Install or build missing dependencies for teamviewer:
error: target not found: lib32-freetype2
error: target not found: lib32-alsa-lib
error: target not found: lib32-zlib
error: target not found: lib32-libxdamage
error: target not found: lib32-gcc-libs
error: target not found: lib32-libxtst
==> Restart building teamviewer ? [y/N]
I am pretty sure there is a solution for this ... because I don't want to sit all day, trying to install an application.
Waiting for your suggestions guys.
PS: I've also tried to install for example, for skype, the lib32-qt4 library, but it's already installed, don't know what's happening.
Last edited by icebox (2013-09-27 09:36:47)

multilib is enabled from /etc/pacman.conf, but it's still the same. Also, as mentioned I got this error also with teamviewer not only skype, and I will probably get it another 1000 of times, since I tried to install only 5 applications until now
This is the /etc/pacman.conf file:
# /etc/pacman.conf
# See the pacman.conf(5) manpage for option and repository directives
# GENERAL OPTIONS
[options]
# The following paths are commented out with their default values listed.
# If you wish to use different paths, uncomment and update the paths.
#RootDir = /
#DBPath = /var/lib/pacman/
#CacheDir = /var/cache/pacman/pkg/
#LogFile = /var/log/pacman.log
#GPGDir = /etc/pacman.d/gnupg/
HoldPkg = pacman glibc
#XferCommand = /usr/bin/curl -C - -f %u > %o
#XferCommand = /usr/bin/wget --passive-ftp -c -O %o %u
#CleanMethod = KeepInstalled
#UseDelta = 0.7
Architecture = auto
# Pacman won't upgrade packages listed in IgnorePkg and members of IgnoreGroup
#IgnorePkg =
#IgnoreGroup =
#NoUpgrade =
#NoExtract =
# Misc options
#UseSyslog
#Color
#TotalDownload
CheckSpace
#VerbosePkgLists
# By default, pacman accepts packages signed by keys that its local keyring
# trusts (see pacman-key and its man page), as well as unsigned packages.
SigLevel = Required DatabaseOptional
LocalFileSigLevel = Optional
#RemoteFileSigLevel = Required
# NOTE: You must run `pacman-key --init` before first using pacman; the local
# keyring can then be populated with the keys of all official Arch Linux
# packagers with `pacman-key --populate archlinux`.
# REPOSITORIES
# - can be defined here or included from another file
# - pacman will search repositories in the order defined here
# - local/custom mirrors can be added here or in separate files
# - repositories listed first will take precedence when packages
# have identical names, regardless of version number
# - URLs will have $repo replaced by the name of the current repo
# - URLs will have $arch replaced by the name of the architecture
# Repository entries are of the format:
# [repo-name]
# Server = ServerName
# Include = IncludePath
# The header [repo-name] is crucial - it must be present and
# uncommented to enable the repo.
# The testing repositories are disabled by default. To enable, uncomment the
# repo name header and Include lines. You can add preferred servers immediately
# after the header, and they will be used before the default mirrors.
[archlinuxfr]
Server = http://repo.archlinux.fr/$arch
#[testing]
#Include = /etc/pacman.d/mirrorlist
[core]
Include = /etc/pacman.d/mirrorlist
[extra]
Include = /etc/pacman.d/mirrorlist
#[community-testing]
#Include = /etc/pacman.d/mirrorlist
[community]
Include = /etc/pacman.d/mirrorlist
# If you want to run 32 bit applications on your x86_64 system,
# enable the multilib repositories as required here.
#[multilib-testing]
#Include = /etc/pacman.d/mirrorlist
[multilib]
Include = /etc/pacman.d/mirrorlist
# An example of a custom package repository. See the pacman manpage for
# tips on creating your own repositories.
#[custom]
#SigLevel = Optional TrustAll
#Server = file:///home/custompkgs

"Error: Application Not Found" Help?

Hey everybody, I was just wondering if anyone could help me out here. Everytime I go to open iTunes, I get an error saying "Application Not found" and I don't know why. I did some researching and heard that Nortons Anti virus might be the problem. WhichI think is probably true because Iinstalled Norton, ran a virus scan, and I can't open quite a few files. iTunes, FireFox, Google Chrome, etc... Anyone know how to fix it? I've uninstalled iTunes and re-installed it and nothing. I also went to the settings in Norton and changed iTunes from 'Auto' to 'Allow' but it still won't work. Any one know what to do?

I figured out the problem - no need to reply.
I mistakenly added an authentication scheme instead of an authorization scheme.
Fixed it - works fine.
Thanks,
David

Error 404--Not Found From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:

I installed 9.1 HCM with peopletools 8.52.
Everything was working fine - I sat up the process schedulers and reports were posting ,I built few pages ,menu etc and registered them and inserted data etc.
Then I decided to setup the Integration broker.
First I ran datamover script - appmsgourgeall.dml to clear the application messaging queue.
and I renamed the local node from PSFT_HR to YACINE_PC_HCM
and I configured the gateway
http://yacine-pc:8000/PSIGW/PeopleSoftListeningConnector
and the status was active.
then loaded the connectors successfully.
In the final step I went to the gateway propreties and I put the app server url //yacine-pc:9000.
user name:PS and pass:PS etc
and added the new node name - I clicked on Ping and it failed but I saved it anyway.
and from there the PIA stopped working .
I restarted the app server the PIA and I even reinstalled the PIA but it always gives me the same error
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
10.4.5 404 Not Found
The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent.
If the server does not wish to make this information available to the client, the status code 403 (Forbidden) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through some internally configurable mechanism, that an old resource is permanently unavailable and has no forwarding address.

For the record
I did fix this error shortly after posting this Thread.
I edited integrationgateway.propreties and I removed the node definition then I redid the setup of the node by adding authentication to it.
Removed lines
#ig.isc.HCM_YACINE_PC.serverURL=//yacine-pc:9000
#ig.isc.HCM_YACINE_PC.userid=PS
#ig.isc.HCM_YACINE_PC.password={V1.1}swDhibXvfL0=
#ig.isc.HCM_YACINE_PC.toolsRel=PT8.52

Error Resource not Found in SXMB_MONI while doing IDoc to File Scenario

Hi Experts,
I am doing IDoc to File Scenario and I am facing Following Error in SXMB_MONI,
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>Application</SAP:Category>
<SAP:Code area="MAPPING">RESOURCE_NOT_FOUND</SAP:Code>
<SAP:P1>193c0e01-bd37-11dd-850c-d879ac131b1f</SAP:P1>
<SAP:P2>http://clarityPOC</SAP:P2>
<SAP:P3>com/sap/xi/tf/_MM_Timesheets_iDocToFile_.class</SAP:P3>
<SAP:P4>-1</SAP:P4>
<SAP:AdditionalText />
<SAP:Stack>Unable to find resource 193c0e01-bd37-11dd-850c-d879ac131b1f in the following software component versions: http://clarityPOCcom/sap/xi/tf/_MM_Timesheets_iDocToFile_.class-1</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
I have tested the same file in test tab of mapping, execution of mapping is successful there.
Regards,
Nitin Patil
Edited by: Nitin Patil on Dec 5, 2008 7:09 AM

Hi Dharmveer I have done the cache refresh ID in XI Data Cache Refresh using link
http://sapnbipoc:50000/rep/support/admin/index.html
but still same error persisting
and in Integration Builder> Environment>Cache Status Overview >Problem tab
following error (initial part of the error pasted) is shown
Thrown:
com.sap.aii.ib.bom.landscape.SLDElementNotFoundException: Adapter Engine af.npi.sapnbipoc not found in SLD
 at com.sap.aii.ib.server.abapcache.sld.AdapterEngineQueries.getAEUrl(AdapterEngineQueries.java:56)
 at com.sap.aii.ib.server.abapcache.sld.AdapterEngineQueries.getAEUrl(AdapterEngineQueries.java:41)
 at com.sap.aii.ib.server.abapcache.logons.IR_LogonData.<init>(IR_LogonData.java:26)
Regards,
Nitin Patil

UCM Log in error : Error 404--Not Found From RFC 2068 Http

Please help with UCM login error. i have ucm 11gR1 running in bea weblogic managed server. server starts fine but login via the browser fails. find below the entry in my ucm server diagnostic log
[2012-04-24T12:00:03.511+03:00] [UCM_server1] [NOTIFICATION] [UCM-CS-000001] [oracle.ucm.idccs] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: d7b527f4c742d7ec:46f382cc:136e38b8675:-8000-0000000000000002,0] [APP: Oracle Universal Content Management - Content Server] general exception
[2012-04-24T12:45:05.782+03:00] [UCM_server1] [ERROR] [UCM-CS-000001] [oracle.ucm.idccs] [tid: index update work] [userId: <anonymous>] [ecid: d7b527f4c742d7ec:-761897a9:136e3bc2012:-8000-0000000000000002,1:20715] [APP: Oracle Universal Content Management - Content Server] general exception
[2012-04-24T12:45:05.953+03:00] [UCM_server1] [ERROR] [UCM-CS-000001] [oracle.ucm.idccs] [tid: index update work] [userId: <anonymous>] [ecid: d7b527f4c742d7ec:-761897a9:136e3bc2012:-8000-0000000000000002,1:20715] [APP: Oracle Universal Content Management - Content Server] general exception[[
java.lang.NullPointerException
 at folios.FolioManager.init(FolioManager.java:49)
 at folios.FolioIndexerFilter.updateStaleFolioEntries(FolioIndexerFilter.java:812)
 at folios.FolioIndexerFilter.doFilter(FolioIndexerFilter.java:109)
 at intradoc.shared.PluginFilters.filterWithAction(PluginFilters.java:114)
 at intradoc.shared.PluginFilters.filter(PluginFilters.java:68)
 at intradoc.indexer.Indexer.doIndexing(Indexer.java:395)
 at intradoc.indexer.Indexer.buildIndex(Indexer.java:319)
 at intradoc.server.IndexerMonitor.doIndexing(IndexerMonitor.java:1021)
 at intradoc.server.IndexerMonitor$4.run(IndexerMonitor.java:841)
[2012-04-24T12:45:18.459+03:00] [UCM_server1] [NOTIFICATION] [UCM-CS-060000] [oracle.ucm.idccs] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: d7b527f4c742d7ec:-761897a9:136e3bc2012:-8000-0000000000000002,0] [APP: Oracle Universal Content Management - Content Server] Starting the service 'Idc Content Service oecm-dev.sssit.net_4444' version 11gR1-11.1.1.4.0-idcprod1-101229T001824 PID 21895.
[2012-04-24T12:45:18.459+03:00] [UCM_server1] [NOTIFICATION] [UCM-CS-000001] [oracle.ucm.idccs] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: d7b527f4c742d7ec:-761897a9:136e3bc2012:-8000-0000000000000002,0] [APP: Oracle Universal Content Management - Content Server] general exception
[2012-04-24T12:45:18.459+03:00] [UCM_server1] [NOTIFICATION] [UCM-CS-060001] [oracle.ucm.idccs] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: d7b527f4c742d7ec:-761897a9:136e3bc2012:-8000-0000000000000002,0] [APP: Oracle Universal Content Management - Content Server] 'NativeOsUtils' component, version '090415 (build $Rev: 73617 $)', provides NativeOsUtils feature(s)
[2012-04-24T12:45:18.459+03:00] [UCM_server1] [NOTIFICATION] [UCM-CS-000001] [oracle.ucm.idccs] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: d7b527f4c742d7ec:-761897a9:136e3bc2012:-8000-0000000000000002,0] [APP: Oracle Universal Content Management - Content Server] general exception
[2012-04-24T12:45:18.459+03:00] [UCM_server1] [NOTIFICATION] [UCM-CS-060001] [oracle.ucm.idccs] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: d7b527f4c742d7ec:-761897a9:136e3bc2012:-8000-0000000000000002,0] [APP: Oracle Universal Content Management - Content Server] 'ContentAccess-win32' component, version '2010_10_08 (build $Rev: 88990 $)', provides ContentAccess:11g-8.3.5.5752 feature(s)
[2012-04-24T12:45:18.460+03:00] [UCM_server1] [NOTIFICATION] [UCM-CS-000001] [oracle.ucm.idccs] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: d7b527f4c742d7ec:-761897a9:136e3bc2012:-8000-0000000000000002,0] [APP: Oracle Universal Content Management - Content Server] general exception
[2012-04-24T12:45:18.460+03:00] [UCM_server1] [NOTIFICATION] [UCM-CS-060001] [oracle.ucm.idccs] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: d7b527f4c742d7ec:-761897a9:136e3bc2012:-8000-0000000000000002,0] [APP: Oracle Universal Content Management - Content Server] 'ContentAccess-solaris-x86' component, version '2010_10_08 (build $Rev: 88990 $)', provides ContentAccess:11g-8.3.5.5752 feature(s)
[2012-04-24T12:45:18.460+03:00] [UCM_server1] [NOTIFICATION] [UCM-CS-000001] [oracle.ucm.idccs] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: d7b527f4c742d7ec:-761897a9:136e3bc2012:-8000-0000000000000002,0] [APP: Oracle Universal Content Management - Content Server] general exception
[2012-04-24T12:45:18.460+03:00] [UCM_server1] [NOTIFICATION] [UCM-CS-060001] [oracle.ucm.idccs] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: d7b527f4c742d7ec:-761897a9:136e3bc2012:-8000-0000000000000002,0] [APP: Oracle Universal Content Management - Content Server] 'ContentAccess-solaris' component, version '2010_10_08 (build $Rev: 88990 $)', provides ContentAccess:11g-8.3.5.5752 feature(s)
[2012-04-24T12:45:18.460+03:00] [UCM_server1] [NOTIFICATION] [UCM-CS-000001] [oracle.ucm.idccs] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: d7b527f4c742d7ec:-761897a9:136e3bc2012:-8000-0000000000000002,0] [APP: Oracle Universal Content Management - Content Server] general exception
[2012-04-24T12:45:18.460+03:00] [UCM_server1] [NOTIFICATION] [UCM-CS-060001] [oracle.ucm.idccs] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: d7b527f4c742d7ec:-761897a9:136e3bc2012:-8000-0000000000000002,0] [APP: Oracle Universal Content Management - Content Server] 'ContentAccess-linux' component, version '2010_10_08 (build $Rev: 88990 $)', provides ContentAccess:11g-8.3.5.5752 feature(s)
[2012-04-24T12:45:18.460+03:00] [UCM_server1] [NOTIFICATION] [UCM-CS-000001] [oracle.ucm.idccs] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: d7b527f4c742d7ec:-761897a9:136e3bc2012:-8000-0000000000000002,0] [APP: Oracle Universal Content Management - Content Server] general exception
[2012-04-24T12:45:18.460+03:00] [UCM_server1] [NOTIFICATION] [UCM-CS-060001] [oracle.ucm.idccs] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: d7b527f4c742d7ec:-761897a9:136e3bc2012:-8000-0000000000000002,0] [APP: Oracle Universal Content Management - Content Server] 'ContentAccess-hpux-ia64' component, version '2010_10_08 (build $Rev: 88990 $)', provides ContentAccess:11g-8.3.5.5752 feature(s)
[2012-04-24T12:45:18.460+03:00] [UCM_server1] [NOTIFICATION] [UCM-CS-000001] [oracle.ucm.idccs] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: d7b527f4c742d7ec:-761897a9:136e3bc2012:-8000-0000000000000002,0] [APP: Oracle Universal Content Management - Content Server] general exception
[2012-04-24T12:45:18.460+03:00] [UCM_server1] [NOTIFICATION] [UCM-CS-060001] [oracle.ucm.idccs] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: d7b527f4c742d7ec:-761897a9:136e3bc2012:-8000-0000000000000002,0] [APP: Oracle Universal Content Management - Content Server] 'ContentAccess-hpux' component, version '2010_10_08 (build $Rev: 88990 $)', provides ContentAccess:11g-8.3.5.5752 feature(s)
[2012-04-24T12:45:18.460+03:00] [UCM_server1] [NOTIFICATION] [UCM-CS-000001] [oracle.ucm.idccs] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: d7b527f4c742d7ec:-761897a9:136e3bc2012:-8000-0000000000000002,0] [APP: Oracle Universal Content Management - Content Server] general exception
[2012-04-24T12:45:18.460+03:00] [UCM_server1] [NOTIFICATION] [UCM-CS-060001] [oracle.ucm.idccs] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: d7b527f4c742d7ec:-761897a9:136e3bc2012:-8000-0000000000000002,0] [APP: Oracle Universal Content Management - Content Server] 'ContentAccess-aix' component, version '2010_10_08 (build $Rev: 88990 $)', provides ContentAccess:11g-8.3.5.5752 feature(s)
[2012-04-24T12:45:18.460+03:00] [UCM_server1] [NOTIFICATION] [UCM-CS-000001] [oracle.ucm.idccs] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: d7b527f4c742d7ec:-761897a9:136e3bc2012:-8000-0000000000000002,0] [APP: Oracle Universal Content Management - Content Server] general exception
[2012-04-24T12:45:18.460+03:00] [UCM_server1] [NOTIFICATION] [UCM-CS-060001] [oracle.ucm.idccs] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: d7b527f4c742d7ec:-761897a9:136e3bc2012:-8000-0000000000000002,0] [APP: Oracle Universal Content Management - Content Server] 'ServletPlugin' component, version '20090916', provides ServletPlugin:1.0.0.0 feature(s)
[2012-04-24T12:45:18.460+03:00] [UCM_server1] [NOTIFICATION] [UCM-CS-000001] [oracle.ucm.idccs] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: d7b527f4c742d7ec:-761897a9:136e3bc2012:-8000-0000000000000002,0] [APP: Oracle Universal Content Management - Content Server] general exception
[2012-04-24T12:45:18.460+03:00] [UCM_server1] [NOTIFICATION] [UCM-CS-060001] [oracle.ucm.idccs] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: d7b527f4c742d7ec:-761897a9:136e3bc2012:-8000-0000000000000002,0] [APP: Oracle Universal Content Management - Content Server] 'YahooUserInterfaceLibrary' component, version '2009_11_30-2.7.0b ($Rev: 79338 $)', provides YahooUserInterfaceLibrary:2.7.0.4 feature(s)
[2012-04-24T12:45:18.460+03:00] [UCM_server1] [NOTIFICATION] [UCM-CS-000001] [oracle.ucm.idccs] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: d7b527f4c742d7ec:-761897a9:136e3bc2012:-8000-0000000000000002,0] [APP: Oracle Universal Content Management - Content Server] general exception
[2012-04-24T12:45:18.460+03:00] [UCM_server1] [NOTIFICATION] [UCM-CS-060001] [oracle.ucm.idccs] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: d7b527f4c742d7ec:-761897a9:136e3bc2012:-8000-0000000000000002,0] [APP: Oracle Universal Content Management - Content Server] 'PopUpCalendar' component, version '2009_07_27 ($Rev: 87071 $)', provides PopUpCalendar feature(s)
[2012-04-24T12:45:18.460+03:00] [UCM_server1] [NOTIFICATION] [UCM-CS-000001] [oracle.ucm.idccs] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: d7b527f4c742d7ec:-761897a9:136e3bc2012:-8000-0000000000000002,0] [APP: Oracle Universal Content Management - Content Server] general exception
[2012-04-24T12:45:18.460+03:00] [UCM_server1] [NOTIFICATION] [UCM-CS-060001] [oracle.ucm.idccs] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: d7b527f4c742d7ec:-761897a9:136e3bc2012:-8000-0000000000000002,0] [APP: Oracle Universal Content Management - Content Server] 'iTextComponent' component, version '2008_10_29 (build 3) ($Rev: 72884 $)', provides iTextComponent:2.0-1.0.0.3 feature(s)
[2012-04-24T12:45:18.460+03:00] [UCM_server1] [NOTIFICATION] [UCM-CS-000001] [oracle.ucm.idccs] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: d7b527f4c742d7ec:-761897a9:136e3bc2012:-8000-0000000000000002,0] [APP: Oracle Universal Content Management - Content Server] general exception
[2012-04-24T12:45:18.460+03:00] [UCM_server1] [NOTIFICATION] [UCM-CS-060001] [oracle.ucm.idccs] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: d7b527f4c742d7ec:-761897a9:136e3bc2012:-8000-0000000000000002,0] [APP: Oracle Universal Content Management - Content Server] 'OracleCleanContent' component, version '2010_07_08 (build $Rev: 86482 $)', provides OracleCleanContent:2010.1.0 feature(s)
[2012-04-24T12:45:18.460+03:00] [UCM_server1] [NOTIFICATION] [UCM-CS-000001] [oracle.ucm.idccs] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: d7b527f4c742d7ec:-761897a9:136e3bc2012:-8000-0000000000000002,0] [APP: Oracle Universal Content Management - Content Server] general exception
[2012-04-24T12:45:18.460+03:00] [UCM_server1] [NOTIFICATION] [UCM-CS-060001] [oracle.ucm.idccs] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: d7b527f4c742d7ec:-761897a9:136e3bc2012:-8000-0000000000000002,0] [APP: Oracle Universal Content Management - Content Server] 'ContentFolios' component, version '2010_02_05 ($Rev: 87100 $)', provides Folios:1.2.0-1.2.0.106 feature(s)
[2012-04-24T12:45:18.460+03:00] [UCM_server1] [NOTIFICATION] [UCM-CS-000001] [oracle.ucm.idccs] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: d7b527f4c742d7ec:-761897a9:136e3bc2012:-8000-0000000000000002,0] [APP: Oracle Universal Content Management - Content Server] general exception
[2012-04-24T12:45:18.460+03:00] [UCM_server1] [NOTIFICATION] [UCM-CS-060001] [oracle.ucm.idccs] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: d7b527f4c742d7ec:-761897a9:136e3bc2012:-8000-0000000000000002,0] [APP: Oracle Universal Content Management - Content Server] 'ConfigMigrationUtility' component, version '2010_04_08 ($Rev: 84106 $)', provides ConfigurationMigration:1.0-1.0.1.68 feature(s)
[2012-04-24T12:45:18.461+03:00] [UCM_server1] [NOTIFICATION] [UCM-CS-000001] [oracle.ucm.idccs] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: d7b527f4c742d7ec:-761897a9:136e3bc2012:-8000-0000000000000002,0] [APP: Oracle Universal Content Management - Content Server] general exception
[2012-04-24T12:45:18.461+03:00] [UCM_server1] [NOTIFICATION] [UCM-CS-060001] [oracle.ucm.idccs] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: d7b527f4c742d7ec:-761897a9:136e3bc2012:-8000-0000000000000002,0] [APP: Oracle Universal Content Management - Content Server] 'CoreWebdav' component, version '2010_06_07 ($Rev: 85599 $)', provides webdav:3.0-3.0 feature(s)
[2012-04-24T12:45:18.461+03:00] [UCM_server1] [NOTIFICATION] [UCM-CS-000001] [oracle.ucm.idccs] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: d7b527f4c742d7ec:-761897a9:136e3bc2012:-8000-0000000000000002,0] [APP: Oracle Universal Content Management - Content Server] general exception
[2012-04-24T12:45:18.461+03:00] [UCM_server1] [NOTIFICATION] [UCM-CS-060001] [oracle.ucm.idccs] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: d7b527f4c742d7ec:-761897a9:136e3bc2012:-8000-0000000000000002,0] [APP: Oracle Universal Content Management - Content Server] 'ExtendedUserAttributes' component, version '2010_01_04 (build 32)', provides ExtendedUserAttributes:1.0.0.1-1.1.1.31 feature(s)
[2012-04-24T12:45:18.461+03:00] [UCM_server1] [NOTIFICATION] [UCM-CS-000001] [oracle.ucm.idccs] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: d7b527f4c742d7ec:-761897a9:136e3bc2012:-8000-0000000000000002,0] [APP: Oracle Universal Content Management - Content Server] general exception
[2012-04-24T12:45:18.461+03:00] [UCM_server1] [NOTIFICATION] [UCM-CS-060001] [oracle.ucm.idccs] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: d7b527f4c742d7ec:-761897a9:136e3bc2012:-8000-0000000000000002,0] [APP: Oracle Universal Content Management - Content Server] 'FCKEditor' component, version '2008_12_23 ($Rev: 70174 $)', provides FckEditor feature(s)
[2012-04-24T12:45:18.461+03:00] [UCM_server1] [NOTIFICATION] [UCM-CS-000001] [oracle.ucm.idccs] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: d7b527f4c742d7ec:-761897a9:136e3bc2012:-8000-0000000000000002,0] [APP: Oracle Universal Content Management - Content Server] general exception
[2012-04-24T12:45:18.461+03:00] [UCM_server1] [NOTIFICATION] [UCM-CS-060001] [oracle.ucm.idccs] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: d7b527f4c742d7ec:-761897a9:136e3bc2012:-8000-0000000000000002,0] [APP: Oracle Universal Content Management - Content Server] 'FileStoreProvider' component, version '2010_05_25 ($Rev: 85096 $)', provides FileStoreProvider feature(s)
[2012-04-24T12:45:18.461+03:00] [UCM_server1] [NOTIFICATION] [UCM-CS-000001] [oracle.ucm.idccs] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: d7b527f4c742d7ec:-761897a9:136e3bc2012:-8000-0000000000000002,0] [APP: Oracle Universal Content Management - Content Server] general exception
[2012-04-24T12:45:18.461+03:00] [UCM_server1] [NOTIFICATION] [UCM-CS-060001] [oracle.ucm.idccs] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: d7b527f4c742d7ec:-761897a9:136e3bc2012:-8000-0000000000000002,0] [APP: Oracle Universal Content Management - Content Server] 'Folders_g' component, version '2010_04_29 (build 11021) ($Rev: 87406 $)', provides folders:11gR1-11020 feature(s)
[2012-04-24T12:45:18.461+03:00] [UCM_server1] [NOTIFICATION] [UCM-CS-000001] [oracle.ucm.idccs] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: d7b527f4c742d7ec:-761897a9:136e3bc2012:-8000-0000000000000002,0] [APP: Oracle Universal Content Management - Content Server] general exception
[2012-04-24T12:45:18.462+03:00] [UCM_server1] [NOTIFICATION] [UCM-CS-060001] [oracle.ucm.idccs] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: d7b527f4c742d7ec:-761897a9:136e3bc2012:-8000-0000000000000002,0] [APP: Oracle Universal Content Management - Content Server] 'JpsUserProvider' component, version '2010_07_26 (build 13) ($Rev: 86985 $)', provides JpsUserProvider:1.0-1.0.0.13 feature(s)
[2012-04-24T12:45:18.462+03:00] [UCM_server1] [NOTIFICATION] [UCM-CS-000001] [oracle.ucm.idccs] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: d7b527f4c742d7ec:-761897a9:136e3bc2012:-8000-0000000000000002,0] [APP: Oracle Universal Content Management - Content Server] general exception
[2012-04-24T12:45:18.462+03:00] [UCM_server1] [NOTIFICATION] [UCM-CS-060001] [oracle.ucm.idccs] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: d7b527f4c742d7ec:-761897a9:136e3bc2012:-8000-0000000000000002,0] [APP: Oracle Universal Content Management - Content Server] 'OracleLocalization' component, version '2009_02_24 (build 1)', provides OracleLocalization:1.0-1.0 feature(s)
[2012-04-24T12:45:18.462+03:00] [UCM_server1] [NOTIFICATION] [UCM-CS-000001] [oracle.ucm.idccs] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: d7b527f4c742d7ec:-761897a9:136e3bc2012:-8000-0000000000000002,0] [APP: Oracle Universal Content Management - Content Server] general exception
[2012-04-24T12:45:18.462+03:00] [UCM_server1] [NOTIFICATION] [UCM-CS-060001] [oracle.ucm.idccs] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: d7b527f4c742d7ec:-761897a9:136e3bc2012:-8000-0000000000000002,0] [APP: Oracle Universal Content Management - Content Server] 'ZipRenditionManagement' component, version '2010_11_03 (build $Rev: 89568 $)', provides ZipRenditions:2.3.4.0 feature(s)
[2012-04-24T12:45:18.462+03:00] [UCM_server1] [NOTIFICATION] [UCM-CS-000001] [oracle.ucm.idccs] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: d7b527f4c742d7ec:-761897a9:136e3bc2012:-8000-0000000000000002,0] [APP: Oracle Universal Content Management - Content Server] general exception
[2012-04-24T12:45:18.462+03:00] [UCM_server1] [NOTIFICATION] [UCM-CS-060001] [oracle.ucm.idccs] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: d7b527f4c742d7ec:-761897a9:136e3bc2012:-8000-0000000000000002,0] [APP: Oracle Universal Content Management - Content Server] 'WebCenterConfigure' component, version '2010_11_17 ($Rev$)', provides WebCenterWorkflows:11.1.1.4.0, WebCenterDCTemplates:11.1.1.4.0 feature(s)
[2012-04-24T12:45:18.462+03:00] [UCM_server1] [NOTIFICATION] [UCM-CS-000001] [oracle.ucm.idccs] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: d7b527f4c742d7ec:-761897a9:136e3bc2012:-8000-0000000000000002,0] [APP: Oracle Universal Content Management - Content Server] general exception
[2012-04-24T12:45:18.462+03:00] [UCM_server1] [NOTIFICATION] [UCM-CS-060001] [oracle.ucm.idccs] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: d7b527f4c742d7ec:-761897a9:136e3bc2012:-8000-0000000000000002,0] [APP: Oracle Universal Content Management - Content Server] 'InboundRefinerySupport' component, version '2010_09_13 ($Rev: 88304 $)', provides Inbound Refinery:8.1.0.3, IBRResubmitOnMetadataChange:1.0.0.0 feature(s)
[2012-04-24T12:45:18.462+03:00] [UCM_server1] [NOTIFICATION] [UCM-CS-000001] [oracle.ucm.idccs] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: d7b527f4c742d7ec:-761897a9:136e3bc2012:-8000-0000000000000002,0] [APP: Oracle Universal Content Management - Content Server] general exception
[2012-04-24T12:45:18.462+03:00] [UCM_server1] [NOTIFICATION] [UCM-CS-060001] [oracle.ucm.idccs] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: d7b527f4c742d7ec:-761897a9:136e3bc2012:-8000-0000000000000002,0] [APP: Oracle Universal Content Management - Content Server] 'TiffConverterSupport' component, version '2009_04_30 (build 7)', provides Tiff Converter feature(s)
[2012-04-24T12:45:18.462+03:00] [UCM_server1] [NOTIFICATION] [UCM-CS-000001] [oracle.ucm.idccs] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: d7b527f4c742d7ec:-761897a9:136e3bc2012:-8000-0000000000000002,0] [APP: Oracle Universal Content Management - Content Server] general exception
[2012-04-24T12:45:18.462+03:00] [UCM_server1] [NOTIFICATION] [UCM-CS-060001] [oracle.ucm.idccs] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: d7b527f4c742d7ec:-761897a9:136e3bc2012:-8000-0000000000000002,0] [APP: Oracle Universal Content Management - Content Server] 'ContentTracker' component, version '11.1.1.3.0 Build 20100914', provides ContentTracker, SiteStudioSupport, RMSupport, ContentAccessOnlyTracking:1.0.0.0-1.0.0.0 feature(s)
[2012-04-24T12:45:18.462+03:00] [UCM_server1] [NOTIFICATION] [UCM-CS-000001] [oracle.ucm.idccs] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: d7b527f4c742d7ec:-761897a9:136e3bc2012:-8000-0000000000000002,0] [APP: Oracle Universal Content Management - Content Server] general exception
[2012-04-24T12:45:18.462+03:00] [UCM_server1] [NOTIFICATION] [UCM-CS-060001] [oracle.ucm.idccs] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: d7b527f4c742d7ec:-761897a9:136e3bc2012:-8000-0000000000000002,0] [APP: Oracle Universal Content Management - Content Server] 'ContentTrackerReports' component, version '11.1.1.3.0 Build 20100827', provides ContentTrackerReports, SiteStudioSupport feature(s)
[2012-04-24T12:45:18.462+03:00] [UCM_server1] [NOTIFICATION] [UCM-CS-000001] [oracle.ucm.idccs] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: d7b527f4c742d7ec:-761897a9:136e3bc2012:-8000-0000000000000002,0] [APP: Oracle Universal Content Management - Content Server] general exception
[2012-04-24T12:45:18.462+03:00] [UCM_server1] [NOTIFICATION] [UCM-CS-060001] [oracle.ucm.idccs] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: d7b527f4c742d7ec:-761897a9:136e3bc2012:-8000-0000000000000002,0] [APP: Oracle Universal Content Management - Content Server] 'CheckoutAndOpenInNative' component, version '2010_12_17 (11.1.4.71) ($Rev: 8790 $)', provides checkoutandopeninnative feature(s)
[2012-04-24T12:45:18.462+03:00] [UCM_server1] [NOTIFICATION] [UCM-CS-000001] [oracle.ucm.idccs] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: d7b527f4c742d7ec:-761897a9:136e3bc2012:-8000-0000000000000002,0] [APP: Oracle Universal Content Management - Content Server] general exception
[2012-04-24T12:45:18.462+03:00] [UCM_server1] [NOTIFICATION] [UCM-CS-060001] [oracle.ucm.idccs] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: d7b527f4c742d7ec:-761897a9:136e3bc2012:-8000-0000000000000002,0] [APP: Oracle Universal Content Management - Content Server] 'PDFWatermark' component, version '11.1.1.3.0 Build 20100827', provides PDFWatermark feature(s)
[2012-04-24T12:45:18.462+03:00] [UCM_server1] [NOTIFICATION] [UCM-CS-000001] [oracle.ucm.idccs] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: d7b527f4c742d7ec:-761897a9:136e3bc2012:-8000-0000000000000002,0] [APP: Oracle Universal Content Management - Content Server] general exception
[2012-04-24T12:45:18.462+03:00] [UCM_server1] [NOTIFICATION] [UCM-CS-060001] [oracle.ucm.idccs] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: d7b527f4c742d7ec:-761897a9:136e3bc2012:-8000-0000000000000002,0] [APP: Oracle Universal Content Management - Content Server] 'DesktopIntegrationSuite' component, version '2010_12_17 (11.1.4.71) ($Rev: 8790 $)', provides DesktopIntegrationSuite:10gR3-9.0.0.0 feature(s)
[2012-04-24T12:45:18.463+03:00] [UCM_server1] [NOTIFICATION] [UCM-CS-000001] [oracle.ucm.idccs] [tid: [ACTIVE].ExecuteThread: '0'

Further information about my server error is below pls
Unresolved optional package references (in META-INF/MANIFEST.MF): [Extension-Name: oracle.rules, referenced from: /u02/oracle/middleware/user_projects/domains/ecm_domain/servers/AdminServer/tmp/_WL_user/emai/xalnv4]. Make sure the referenced optional package has been deployed as a library.>
<Apr 25, 2012 9:15:53 AM AST> <Info> <WebService> <BEA-220103> <Async web service support is not fully configured. The async response web service /AsyncResponseServiceHttps for this server was not fully deployed because the JMS reliability queue was not defined/deployed: weblogic.wsee.DefaultQueue. The server will periodically retry completing the deploy for the service. This message can usually be ignored unless there are async web service applications. To completely disable async web service support, thus avoiding this message, set -Dweblogic.wsee.skip.async.response=true.>

Error 404--Not Found - while running report in 11g

Dear All ,
I have my oracle application in 10g R1. Now we are migarting that to 11g .
There is a temporary directory where we are generating report output (PDF)
we are using an alias name web_reps for this folder .
Given the AliasMatch in forms.conf and in registry given the alias name for FORMS_MAPPING .
It was working with 10g . Tried the same in 11g so that report is generating in the folder (PDF)
but while openeing the file using web.showdocument () using the alias name it is giving the below error .
Error 404--Not Found
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
10.4.5 404 Not Found
The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent.
If the server does not wish to make this information available to the client, the status code 403 (Forbidden) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through some internally configurable mechanism, that an old resource is permanently unavailable and has no forwarding address.
If any body know this issue pls help .
Thanks
Jyo

Are you using apache in front of your weblogics, or just plain weblogic? Also please post the full version of your 11g installation (11.1.1.x or 11.1.2.x). If you are using no apache and the 11.1.1.x version for development (without apache) the forms servlet and the reports servlet are deployed on different weblogic instances running on a different port; meaning forms is available under e.g.
http://ias:9001/forms/frmservlet
whereas reports is available under
http://ias:9002/reports/rwservlet
but when running reports via web.show_document it assumes both are running on the same port. Also make sure your weblogic instances are up and running. So either you use apache for production (in 11.1.1.x or 11.1.2.x) or you go for 11.1.2 in development where the forms and the reports servlets are deployed on the very same port. As far as I am concerned I'd go for 11.1.2 as the production environment is nothing different from 11.1.1 and the development environment is a hell of a lot easier to install.
cheers

Error 404--Not Found while accessing web app through Weblogic 6.1

Hi everybody,
 I am new to Weblogic and recently installed Weblogic6.1
 on my machine and I am trying to access my application using weblogic
 and it gives
 Error 404--Not Found
 From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
 10.4.5 404 Not Found
 I have uploaded the WAR file of my application using the Admin
 console. The WAR file is place under
 \bea\wlserver6.1\config\mydomain\applications\screen.war.
 What am I doing wrong ?
 Thanks is advance.
 PS: I am also including my web.xml file
 <?xml version="1.0" encoding="ISO-8859-1"?>
 <!DOCTYPE web-app
 PUBLIC "-//Sun Microsystems, Inc.//DTD Web Application 2.2//EN"
 "http://java.sun.com/j2ee/dtds/web-app_2_2.dtd">
 <web-app>
 <session-config>
 <session-timeout>-1</session-timeout>
 </session-config>
 
 <servlet>
 <servlet-name>action</servlet-name>
 <servlet-class>org.apache.struts.action.ActionServlet</servlet-class>
 <init-param>
 <param-name>application</param-name>
 <param-value>resources.nmr.ApplicationResources</param-value>
 </init-param>
 <init-param>
 <param-name>config</param-name>
 <param-value>/WEB-INF/struts-config.xml</param-value>
 </init-param>
 <init-param>
 <param-name>debug</param-name>
 <param-value>2</param-value>
 </init-param>
 <init-param>
 <param-name>detail</param-name>
 <param-value>2</param-value>
 </init-param>
 <init-param>
 <param-name>validate</param-name>
 <param-value>true</param-value>
 </init-param>
 <load-on-startup>2</load-on-startup>
 </servlet>
 
 <servlet-mapping>
 <servlet-name>action</servlet-name>
 <url-pattern>*.do</url-pattern>
 </servlet-mapping>
 
 <servlet>
 <servlet-name>pdf</servlet-name>
 <servlet-class>com.abbott.gprd.servlets.PdfServlet</servlet-class>
 </servlet>
 
 <servlet-mapping>
 <servlet-name>pdf</servlet-name>
 <url-pattern>/pdf</url-pattern>
 </servlet-mapping>
 
 <mime-mapping>
 <extension>mol</extension>
 <mime-type>chemical/x-mdl-molfile</mime-type>
 </mime-mapping>
 
 <welcome-file-list>
 <welcome-file>index.jsp</welcome-file>
 </welcome-file-list>
 
 <taglib>
 <taglib-uri>/WEB-INF/app.tld</taglib-uri>
 <taglib-location>/WEB-INF/app.tld</taglib-location>
 </taglib>
 
 <taglib>
 <taglib-uri>/WEB-INF/struts-bean.tld</taglib-uri>
 <taglib-location>/WEB-INF/struts-bean.tld</taglib-location>
 </taglib>
 <taglib>
 <taglib-uri>/WEB-INF/struts-html.tld</taglib-uri>
 <taglib-location>/WEB-INF/struts-html.tld</taglib-location>
 </taglib>
 <taglib>
 <taglib-uri>/WEB-INF/struts-logic.tld</taglib-uri>
 <taglib-location>/WEB-INF/struts-logic.tld</taglib-location>
 </taglib>
 <taglib>
 <taglib-uri>/WEB-INF/nmr.tld</taglib-uri>
 <taglib-location>/WEB-INF/nmr.tld</taglib-location>
 </taglib>
 </web-app>


hmm
 it all looks ok to me
 what happens if you try to access an image or something in your war (ie
 something not java related)
 also - i have seen on some machines that localhost doesnt work but 127.0.0.1
 does work
 your app should be trying to access index.jsp which should be in the root
 directory of your war
 does index.jsp exist and is it in the root directory of your war?
 lastly - i noticed you have a startup servlet. Put a system.out in the init
 method of the servlet. If the servlet is being deployed OK then you should
 see some output in the console
 "Ravi" <[email protected]> wrote in message
 news:[email protected]...
 > I am specifying the same http://localhost:7001/screen and it still
 > gives the same error.
 >
 > Following is part of my cofig.xml where myapp is specified.
 >
 > <CustomRealm
 >
 ConfigurationData="user.filter=(&(cn=%u)(objectclass=person));user.dn=ou
 =people,
 > o=example.com;server.principal=cn=admin,
 >
 o=example.com;membership.filter=(&(member=%M)(objectclass=groupofuniquen
 ames));group.filter=(&(cn=%g)(objectclass=groupofuniquenames));server.ho
 st=ldapserver.example.com;server.ssl=true;group.dn=ou=groups,
 > o=example.com"
 > Name="defaultLDAPRealmForNovellDirectoryServices"
 > Notes="This is provided as an example. Before enabling this
 > Realm, you must edit the configuration parameters as appropriate for
 > your environment."
 > Password="{3DES}/4XkW5rmVvBHzFtI9SRK/g=="
 > RealmClassName="weblogic.security.ldaprealmv2.LDAPRealm"/>
 > <Server ListenPort="7001" Name="myserver" NativeIOEnabled="true"
 > TransactionLogFilePrefix="config/mydomain/logs/">
 > <Log FileName="config/mydomain/logs/weblogic.log"
 > Name="myserver"/>
 > <SSL Enabled="true" ListenPort="7002" Name="myserver"
 > ServerCertificateChainFileName="config/mydomain/ca.pem"
 > ServerCertificateFileName="config/mydomain/democert.pem"
 > ServerKeyFileName="config/mydomain/demokey.pem"/>
 > <WebServer DefaultWebApp="DefaultWebApp"
 > LogFileName="./config/mydomain/logs/access.log"
 > LoggingEnabled="true" Name="myserver"/>
 > <ServerDebug Name="myserver"/>
 > <ExecuteQueue Name="default"/>
 > <KernelDebug Name="myserver"/>
 > <ServerStart Name="myserver"/>
 > </Server>
 > <Application Deployed="true" Name="screen"
 > Path=".\config\mydomain\applications">
 > <WebAppComponent Name="screen" Targets="myserver"
 > URI="screen.war"/>
 > </Application>
 > <SNMPAgent Name="mydomain"/>
 > <Realm FileRealm="wl_default_file_realm" Name="wl_default_realm"/>
 > <ApplicationManager Name="mydomain"/>
 > <JTA Name="mydomain"/>
 >
 > Thanks in advance.
 > Ravi.
 >
 >
 > "Matt Krevs" <[email protected]> wrote in message
 news:<[email protected]>...
 > > what url are you specifying?
 > >
 > > i would guess that http://localhost/screen-web would work. Hard to say
 > > without also seeing your config.xml
 > >
 > > The critical item in config.xml is the value of URI in the
 webappcomponent
 > > element for your application
 > >
 > > eg if it was
 > >
 > > <WebAppComponent Name="myapp-web" Targets="myerver" URI="myapp-web"/>
 > >
 > > then the url you would call is http://localhost/myapp-web
 > >
 > > "Ravi" <[email protected]> wrote in message
 > > news:[email protected]...
 > > > Hi everybody,
 > > > I am new to Weblogic and recently installed Weblogic6.1
 > > > on my machine and I am trying to access my application using weblogic
 > > > and it gives
 > > >
 > > > Error 404--Not Found
 > > > From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
 > > > 10.4.5 404 Not Found
 > > >
 > > > I have uploaded the WAR file of my application using the Admin
 > > > console. The WAR file is place under
 > > > \bea\wlserver6.1\config\mydomain\applications\screen.war.
 > > >
 > > > What am I doing wrong ?
 > > >
 > > > Thanks is advance.
 > > >
 > > > PS: I am also including my web.xml file
 > > >
 > > > <?xml version="1.0" encoding="ISO-8859-1"?>
 > > >
 > > > <!DOCTYPE web-app
 > > > PUBLIC "-//Sun Microsystems, Inc.//DTD Web Application 2.2//EN"
 > > > "http://java.sun.com/j2ee/dtds/web-app_2_2.dtd">
 > > >
 > > > <web-app>
 > > >
 > > > <session-config>
 > > > <session-timeout>-1</session-timeout>
 > > > </session-config>
 > > >
 > > > 
 > > > <servlet>
 > > > <servlet-name>action</servlet-name>
 > > >
 <servlet-class>org.apache.struts.action.ActionServlet</servlet-class>
 > > > <init-param>
 > > > <param-name>application</param-name>
 > > > <param-value>resources.nmr.ApplicationResources</param-value>
 > > > </init-param>
 > > > <init-param>
 > > > <param-name>config</param-name>
 > > > <param-value>/WEB-INF/struts-config.xml</param-value>
 > > > </init-param>
 > > > <init-param>
 > > > <param-name>debug</param-name>
 > > > <param-value>2</param-value>
 > > > </init-param>
 > > > <init-param>
 > > > <param-name>detail</param-name>
 > > > <param-value>2</param-value>
 > > > </init-param>
 > > > <init-param>
 > > > <param-name>validate</param-name>
 > > > <param-value>true</param-value>
 > > > </init-param>
 > > > <load-on-startup>2</load-on-startup>
 > > >
 > > > </servlet>
 > > >
 > > > 
 > > > <servlet-mapping>
 > > > <servlet-name>action</servlet-name>
 > > > <url-pattern>*.do</url-pattern>
 > > > </servlet-mapping>
 > > >
 > > > 
 > > > <servlet>
 > > > <servlet-name>pdf</servlet-name>
 > > >
 <servlet-class>com.abbott.gprd.servlets.PdfServlet</servlet-class>
 > > > </servlet>
 > > >
 > > >
 > > > 
 > > > <servlet-mapping>
 > > > <servlet-name>pdf</servlet-name>
 > > > <url-pattern>/pdf</url-pattern>
 > > > </servlet-mapping>
 > > >
 > > > 
 > > > <mime-mapping>
 > > > <extension>mol</extension>
 > > > <mime-type>chemical/x-mdl-molfile</mime-type>
 > > > </mime-mapping>
 > > >
 > > >
 > > > 
 > > > <welcome-file-list>
 > > > <welcome-file>index.jsp</welcome-file>
 > > > </welcome-file-list>
 > > >
 > > > 
 > > > <taglib>
 > > > <taglib-uri>/WEB-INF/app.tld</taglib-uri>
 > > > <taglib-location>/WEB-INF/app.tld</taglib-location>
 > > > </taglib>
 > > >
 > > > 
 > > > <taglib>
 > > > <taglib-uri>/WEB-INF/struts-bean.tld</taglib-uri>
 > > > <taglib-location>/WEB-INF/struts-bean.tld</taglib-location>
 > > > </taglib>
 > > >
 > > > <taglib>
 > > > <taglib-uri>/WEB-INF/struts-html.tld</taglib-uri>
 > > > <taglib-location>/WEB-INF/struts-html.tld</taglib-location>
 > > > </taglib>
 > > >
 > > > <taglib>
 > > > <taglib-uri>/WEB-INF/struts-logic.tld</taglib-uri>
 > > > <taglib-location>/WEB-INF/struts-logic.tld</taglib-location>
 > > > </taglib>
 > > >
 > > > <taglib>
 > > > <taglib-uri>/WEB-INF/nmr.tld</taglib-uri>
 > > > <taglib-location>/WEB-INF/nmr.tld</taglib-location>
 > > > </taglib>
 > > >
 > > > </web-app>

Test_fwktutorial error. Application not found

I have been worked on this for a whole day.
I installed Jdeveloper for RUP6 and went through all the set up ( Task 1-6 ). However, I got pop up error -- Application not found when I tried test_fwktutorial.jsp.
I have verified the database connection is valid. The user name and password id valid.
Application -> AK
Responsibility -> FWK_TBX_TUTORIAL
Embedded OC4J -> Host Name -> Default Local IP Address.
What elso Do I need to check for this error?
[Starting OC4J using the following ports: HTTP=8989, RMI=23892, JMS=9228.]
C:\JDEV\jdevbin\jdk\bin\javaw.exe -client -classpath C:\JDEV\jdevbin\j2ee\home\oc4j.jar;C:\JDEV\jdevbin\jdev\lib\jdev-oc4j.jar -Xbootclasspath/p:C:\JDEV\jdevbin\jdev\appslibrt\ojdbc14.jar;C:\JDEV\jdevbin\jdev\appslibrt\nls_charset12.zip -DFND_JDBC_STMT_CACHE_SIZE=200 -DCACHENODBINIT=true -DRUN_FROM_JDEV=true -mx256m -Doracle.j2ee.dont.use.memory.archive=false; -Duser.language=en -Duser.region=US -Duser.country=US -Xverify:none -Doracle.j2ee.dont.use.memory.archive=true -Doracle.j2ee.http.socket.timeout=5000 com.evermind.server.OC4JServer -config C:\JDEV\jdevhome\jdev\system9.0.3.5.1453\oc4j-config\server.xml
[waiting for the server to complete its initialization...]
Ready message received from Oc4jNotifier.
Embedded OC4J startup time: 1594 ms.
Auto-deploying OA Framework web application deployment descriptor (New server version detected)...
Oracle9iAS (9.0.3.1.0) Containers for J2EE initialized
Access is denied.

The problem is due to the default web browser not set. I found out the solution on the web. After reset the default web browser, I was able to run the 'Hello World' Page.
Thank you for the response.
To resolve the problem, use the Default Programs feature in Windows Vista to reset the default Web browser preference.
Reset the default web browser
Step 1
1. Click Start, Default Programs
2. Click Set your default programs
3. Select your web browser from the list
4. Click Set this program as default
5. Click OK.
Then follow these steps:
Step 2
1. Click Set program access and computer defaults
2. Click Continue if you see the User Account Control prompt.
3. Click Custom
4. Select your web browser from the list
5. Click OK.

PCUI Application Not Found eRROR

I would like to use the PCUI, so I was advised to go to transaction se80 select BSP Application from the drop down,type in CRM_BSP_FRAME, click the display button and then click on Pages with Flow Logic. Right click on select.htm and click on test.
This is suppossed to open a browser window where I can find list of BSP Application. Unfortunately whenever click on test I get an error "Application Not Found" together with the url whihc was meant to lead me to
the BSP.
Could anyone help me on this one, we are implementing CRM 4.0 and need it for case management as as other pcui business processes.
We also are implementing the Enterprise Portal, just letting you maybe you caould advise on how best to go about this scenario.

Thank you so much Manuel, Frederick, and SAP Addict for the assistance, you know what I think its my computer that has a problem, because I decided to login from another machine and fortunately when I tried to open the PCUI it did not give me the No Application Error Found message. Instead it is giving me a Network Access Message Error.
On the other hand when I use the machine upon which the Enterprise Portal is being developed, I receive the following error:
"This browser is not supported"of which the default browser is Mozilla. We changed it back to Internet Exp, and the error this time after I logged using my GUI user name and password was a RABAX30 error.
So with regards my error "Application Not Found eRROR" what could be the possible cause, could it be that there are some GUI componentes missing or what???????
Oh I rewarded points to each of you guys, may you please continue with the support will sure reward points

Getting "Error 404--Not Found" while connecting to OLT session

Hi all,
I am getting "Error 404--Not Found" error while connecting to OLT session. I had tried re-starting all the services including the database services but to no avail.
Below is the description :
Error 404--Not Found
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
10.4.5 404 Not Found
The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent.
If the server does not wish to make this information available to the client, the status code 403 (Forbidden) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through some internally configurable mechanism, that an old resource is permanently unavailable and has no forwarding address.
If anybody had faced similar issues, please do let me know the resolution for the same.
Thanks,
Sunny

Is that the first time you connect to OLT?
If yes, please check OATS release notes.
Thx
JB

While opening em console for soa -- Error 404--Not Found

Hi Gurus,
i installed SOA 11.1.1.5.0 wilh admin server ,soa_server,bam_server.
while opeing the fm control using http://<hostname>.<domainname>:7001/em.
the below error message is displaying .
but i am able to open with http://<hostname>.<domainname>:7001/console.
Error 404--Not Found
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
10.4.5 404 Not Found
The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent.
If the server does not wish to make this information available to the client, the status code 403 (Forbidden) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through some internally configurable mechanism, that an old resource is permanently unavailable and has no forwarding address.
Please can someone guide me how to resolve this.
Thanks
San

While opening em console for soa -- Error 404--Not Found
Regards,
Anuj

EPM 11.1.2.3 ,Error 404 - Not Found

Hi All,
I am getting the following error after my installation and configuration of EPM 11.1.2.3 and when I try to access the Workspace URL.
Error 404--Not Found
From RFC 2068 Hypertext Transfer Protocol --
HTTP/1.1:
10.4.5 404 Not Found
The server has not found anything matching the
Request-URI. No indication is given of whether the condition is temporary or
permanent.
If the server does not wish to make this information available to the client,
the status code 403 (Forbidden) can be used instead. The 410 (Gone) status code
SHOULD be used if the server knows, through some internally configurable
mechanism, that an old resource is permanently unavailable and has no forwarding
address.
I installed 11.1.2.3 in windows 7 ultimate OS and 64 bit and using sql server 2005 Database and configured Essbase,planning, hfm, arm, fcm,fdm ,hpcm, , everything was configured successfully but when I open the workspace URL it is throwing "Error 404 not found"
I tried accessing http://machinename:7001/console (I replaced machinename with my machinename)
even here I am getting the same error, but I checked the database and it has the table hss_component_types and it is populated with the various products.
could you guide me
Regards,
SG
The following is the error I am getting in C:\Oracle\Middleware\user_projects\epmsystem1\diagnostics\logs\services
<Jul 9, 2013 7:30:18 PM CDT> <Info> <Security> <BEA-090905> <Disabling CryptoJ JCE Provider self-integrity check for better startup performance. To enable this check, specify -Dweblogic.security.allowCryptoJDefaultJCEVerification=true>
<Jul 9, 2013 7:30:18 PM CDT> <Info> <Security> <BEA-090906> <Changing the default Random Number Generator in RSA CryptoJ from ECDRBG to FIPS186PRNG. To disable this change, specify -Dweblogic.security.allowCryptoJDefaultPRNG=true>
<Jul 9, 2013 7:30:18 PM CDT> <Notice> <WebLogicServer> <BEA-000395> <Following extensions directory contents added to the end of the classpath:
C:\Oracle\Middleware\user_projects\domains\EPMSystem\lib\audit-client.jar;C:\Oracle\Middleware\user_projects\domains\EPMSystem\lib\css.jar;C:\Oracle\Middleware\user_projects\domains\EPMSystem\lib\ctg_custom.jar;C:\Oracle\Middleware\user_projects\domains\EPMSystem\lib\ldapbp.jar;C:\Oracle\Middleware\user_projects\domains\EPMSystem\lib\opencsv-1.8.jar;C:\Oracle\Middleware\user_projects\domains\EPMSystem\lib\registry-api.jar;C:\Oracle\Middleware\user_projects\domains\EPMSystem\lib\wlpool.jar>
<Jul 9, 2013 7:30:18 PM CDT> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Oracle JRockit(R) Version R28.2.5-50-153520-1.6.0_37-20121220-0844-windows-x86_64 from Oracle Corporation>
<Jul 9, 2013 7:30:47 PM CDT> <Info> <Management> <BEA-141107> <Version: WebLogic Server 10.3.6.0 Tue Nov 15 08:52:36 PST 2011 1441050 >
<Jul 9, 2013 7:30:57 PM CDT> <Emergency> <Management> <BEA-141151> <The admin server could not be reached at http://SUBHASUBBU:7001.>
<Jul 9, 2013 7:30:57 PM CDT> <Info> <Configuration Management> <BEA-150018> <This server is being started in managed server independence mode in the absence of the admin server.>
<Jul 9, 2013 7:30:57 PM CDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<Jul 9, 2013 7:30:57 PM CDT> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>
<Jul 9, 2013 7:30:58 PM CDT> <Notice> <LoggingService> <BEA-320400> <The log file C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EPMServer0\logs\EPMServer0.log will be rotated. Reopen the log file if tailing has stopped. This can happen on some platforms like Windows.>
<Jul 9, 2013 7:30:58 PM CDT> <Notice> <LoggingService> <BEA-320401> <The log file has been rotated to C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EPMServer0\logs\EPMServer0.log00002. Log messages will continue to be logged in C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EPMServer0\logs\EPMServer0.log.>
<Jul 9, 2013 7:30:58 PM CDT> <Notice> <Log Management> <BEA-170019> <The server log file C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EPMServer0\logs\EPMServer0.log is opened. All server side log events will be written to this file.>
OracleFileSSOWalletImpl.getWalletData: enter...
OracleFileSSOWalletImpl.getWalletData: System.getProperty(user.name)=SUBHASUBBU$
OracleFileSSOWalletImpl.getWalletData: locking (shared) dummy sso file..
OracleFileSSOWalletImpl.getWalletData: locking (shared) sso file..
Oracle Wallet: wallet size 8349
OracleWallet: getSecretStore
OracleSecretStore: loading wallet from stream
OracleSSOKeyStoreImpl: engineLoad
OracleKeyStoreSpi: Loading wallet from stream
OracleKeyStoreSpi: Opening safe 0
OracleKeyStoreSpi: Opening safe 0
OracleKeyStoreSpi: found cert bag
OracleKeyStoreSpi: found cert bag
OracleKeyStoreSpi: found cert bag
OracleKeyStoreSpi: found cert bag
OracleKeyStoreSpi: found cert bag
OracleKeyStoreSpi: found cert bag
OracleKeyStoreSpi: found cert bag
OracleKeyStoreSpi: found cert bag
OracleKeyStoreSpi: Opening safe 0
OracleKeyStoreSpi: found secret store bag
OracleKeyStoreSpi: found secret store bag
OracleKeyStoreSpi: found secret store bag
OracleKeyStoreSpi: found secret store bag
OracleKeyStoreSpi: Opening safe 0
OracleKeyStoreSpi: Opening safe 0
Processing TP 0
Storing TP 0 as CN=Entrust.net Secure Server Certification Authority
Processing TP 1
Storing TP 1 as CN=Entrust.net Secure Server Certification Authority 1
Processing TP 2
Storing TP 2 as CN=Entrust.net Certification Authority (2048)
Processing TP 3
Storing TP 3 as CN=GTE CyberTrust Global Root
Processing TP 4
Storing TP 4 as OU=Secure Server Certification Authority
Processing TP 5
Storing TP 5 as OU=Class 1 Public Primary Certification Authority
Processing TP 6
Storing TP 6 as OU=Class 2 Public Primary Certification Authority
Processing TP 7
Storing TP 7 as OU=Class 3 Public Primary Certification Authority
OracleKeyStoreSpi: Storing Secret0
Getting sequence from bag
Getting alias from sequence
Getting secret from sequence
OracleKeyStoreSpi: Storing Secret1
Getting sequence from bag
Getting alias from sequence
Getting secret from sequence
OracleKeyStoreSpi: Storing Secret2
Getting sequence from bag
Getting alias from sequence
Getting secret from sequence
OracleKeyStoreSpi: Storing Secret3
Getting sequence from bag
Getting alias from sequence
Getting secret from sequence
OracleKeyStoreSpi: Keystore Loaded
OracleWallet: getSecretStore
OracleFileSSOWalletImpl.getWalletData: enter...
OracleFileSSOWalletImpl.getWalletData: System.getProperty(user.name)=SUBHASUBBU$
OracleFileSSOWalletImpl.getWalletData: locking (shared) dummy sso file..
OracleFileSSOWalletImpl.getWalletData: locking (shared) sso file..
Oracle Wallet: wallet size 3941
OracleWallet: getSecretStore
OracleSecretStore: loading wallet from stream
OracleSSOKeyStoreImpl: engineLoad
OracleKeyStoreSpi: Loading wallet from stream
OracleKeyStoreSpi: Opening safe 0
OracleKeyStoreSpi: Opening safe 0
OracleKeyStoreSpi: found cert bag
OracleKeyStoreSpi: found cert bag
OracleKeyStoreSpi: found cert bag
OracleKeyStoreSpi: found cert bag
OracleKeyStoreSpi: Opening safe 0
OracleKeyStoreSpi: found secret store bag
OracleKeyStoreSpi: found secret store bag
OracleKeyStoreSpi: found secret store bag
OracleKeyStoreSpi: found secret store bag
OracleKeyStoreSpi: Opening safe 0
OracleKeyStoreSpi: Opening safe 0
Processing TP 0
Storing TP 0 as OU=Class 1 Public Primary Certification Authority
Processing TP 1
Storing TP 1 as CN=GTE CyberTrust Global Root
Processing TP 2
Storing TP 2 as OU=Class 2 Public Primary Certification Authority
Processing TP 3
Storing TP 3 as OU=Class 3 Public Primary Certification Authority
OracleKeyStoreSpi: Storing Secret0
Getting sequence from bag
Getting alias from sequence
Getting secret from sequence
OracleKeyStoreSpi: Storing Secret1
Getting sequence from bag
Getting alias from sequence
Getting secret from sequence
OracleKeyStoreSpi: Storing Secret2
Getting sequence from bag
Getting alias from sequence
Getting secret from sequence
OracleKeyStoreSpi: Storing Secret3
Getting sequence from bag
Getting alias from sequence
Getting secret from sequence
OracleKeyStoreSpi: Keystore Loaded
OracleWallet: getSecretStore
<Jul 9, 2013 7:31:19 PM CDT> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
<Jul 9, 2013 7:31:19 PM CDT> <Notice> <Security> <BEA-090083> <Storing boot identity in the file: C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EPMServer0\security\boot.properties>
<Jul 9, 2013 7:31:41 PM CDT> <Warning> <JTA> <BEA-110503> <The migrator(the AdminServer for manual JTA migration policy, or the Singleton Master for automatic JTA migration policy) is not available. Will skip JTA TRS failback because isStrictOwnershipCheck is [false]. This may lead to potencial TLOG corruption if TRS of EPMServer0 has been migrated to backup server and the backup server is accessing the TLOG of EPMServer0. More safety can be achieved by setting isStrictOwnershipCheck to [true].>
<Jul 9, 2013 7:31:42 PM CDT> <Notice> <LoggingService> <BEA-320400> <The log file C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EPMServer0\logs\access.log will be rotated. Reopen the log file if tailing has stopped. This can happen on some platforms like Windows.>
<Jul 9, 2013 7:31:42 PM CDT> <Notice> <LoggingService> <BEA-320401> <The log file has been rotated to C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EPMServer0\logs\access.log00002. Log messages will continue to be logged in C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EPMServer0\logs\access.log.>
<Jul 9, 2013 7:32:18 PM CDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STANDBY>
<Jul 9, 2013 7:32:18 PM CDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
Using OraclePKI Provider
javax.net.ssl.TrustManagerFactory supported
javax.net.ssl.KeyManagerFactory supported
Using OracleJSSE103 Provider
<Jul 9, 2013 7:32:21 PM CDT> <Warning> <JDBC> <BEA-001552> <The logging last resource (LLR) data source accountreconciliation_datasource will not function when it is a participant in a global transaction that spans multiple WebLogic Server instances because remote JDBC support is disabled. LLR will function in single-server configurations.>
<Jul 9, 2013 7:32:21 PM CDT> <Warning> <JDBC> <BEA-001552> <The logging last resource (LLR) data source financialclose_datasource will not function when it is a participant in a global transaction that spans multiple WebLogic Server instances because remote JDBC support is disabled. LLR will function in single-server configurations.>
<Jul 9, 2013 7:33:42 PM CDT> <Warning> <Security> <BEA-090668> <Ignored deployment of role "Admin" for resource "type=<url>, application=DMS Application#11.1.1.1.0, contextPath=/dms, uri=/">
<Jul 9, 2013 7:33:47 PM CDT> <Error> <Deployer> <BEA-149205> <Failed to initialize the application 'ACCOUNTRECONCILIATION [Version=11.1.2.0]' due to error weblogic.management.DeploymentException: [J2EE:160149]Error while processing library references. Unresolved application library references, defined in weblogic-application.xml: [Extension-Name: oracle.soa.workflow.wc, exact-match: false]..
weblogic.management.DeploymentException: [J2EE:160149]Error while processing library references. Unresolved application library references, defined in weblogic-application.xml: [Extension-Name: oracle.soa.workflow.wc, exact-match: false].
at weblogic.application.internal.flow.CheckLibraryReferenceFlow.prepare(CheckLibraryReferenceFlow.java:26)
at weblogic.application.internal.BaseDeployment$1.next(BaseDeployment.java:648)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.BaseDeployment.prepare(BaseDeployment.java:191)
at weblogic.application.internal.EarDeployment.prepare(EarDeployment.java:59)
Truncated. see log file for complete stacktrace
>
<Jul 9, 2013 7:34:12 PM CDT> <Warning> <EJB> <BEA-010001> <While deploying EJB 'RuleService_AsyncRequestProcessorMDB', class oracle.j2ee.ws.server.jaxws.AsyncRequestProcessorMDB was loaded from the system classpath. As a result, this class cannot be reloaded while the server is running. To prevent this behavior in the future, make sure the class is not located in the server classpath.>
<Jul 9, 2013 7:34:12 PM CDT> <Warning> <EJB> <BEA-010001> <While deploying EJB 'RuleService_AsyncResponseProcessorMDB', class oracle.j2ee.ws.server.jaxws.AsyncResponseProcessorMDB was loaded from the system classpath. As a result, this class cannot be reloaded while the server is running. To prevent this behavior in the future, make sure the class is not located in the server classpath.>
<Jul 9, 2013 7:34:13 PM CDT> <Warning> <Munger> <BEA-2156203> <A version attribute was not found in element application in the deployment descriptor in C:\Oracle\Middleware\EPMSystem11R1\products\Essbase\aps\AppServer\InstallableApps\Common\aps.ear/META-INF/application.xml. A version attribute is required, but this version of the Weblogic Server will assume that the JEE5 is used. Future versions of the Weblogic Server will reject descriptors that do not specify the JEE version.>
<Jul 9, 2013 7:34:13 PM CDT> <Warning> <Munger> <BEA-2156203> <A version attribute was not found in element application in the deployment descriptor in C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EPMServer0\tmp\servers\EPMServer0\tmp\_WL_user\APS_11.1.2.0\mizf54/META-INF/application.xml. A version attribute is required, but this version of the Weblogic Server will assume that the JEE5 is used. Future versions of the Weblogic Server will reject descriptors that do not specify the JEE version.>
<Jul 9, 2013 7:35:15 PM CDT> <Error> <Deployer> <BEA-149205> <Failed to initialize the application 'FINANCIALCLOSE [Version=11.1.2.0]' due to error weblogic.management.DeploymentException: [J2EE:160149]Error while processing library references. Unresolved application library references, defined in weblogic-application.xml: [Extension-Name: oracle.soa.workflow.wc, exact-match: false]..
weblogic.management.DeploymentException: [J2EE:160149]Error while processing library references. Unresolved application library references, defined in weblogic-application.xml: [Extension-Name: oracle.soa.workflow.wc, exact-match: false].
at weblogic.application.internal.flow.CheckLibraryReferenceFlow.prepare(CheckLibraryReferenceFlow.java:26)
at weblogic.application.internal.BaseDeployment$1.next(BaseDeployment.java:648)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.BaseDeployment.prepare(BaseDeployment.java:191)
at weblogic.application.internal.EarDeployment.prepare(EarDeployment.java:59)
Truncated. see log file for complete stacktrace
>
<Jul 9, 2013 7:35:44 PM CDT> <Warning> <J2EE> <BEA-160140> <Unresolved optional package references (in META-INF/MANIFEST.MF): [Extension-Name: com/oracle/adfm, Specification-Version: 1, referenced from: C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EPMServer0\tmp\servers\EPMServer0\tmp\_WL_user\FMADFWEB_11.1.2.0\nw1g9o]. Make sure the referenced optional package has been deployed as a library.>
<Jul 9, 2013 7:35:49 PM CDT> <Warning> <EJB> <BEA-010001> <While deploying EJB 'ActionsService_AsyncRequestProcessorMDB', class oracle.j2ee.ws.server.jaxws.AsyncRequestProcessorMDB was loaded from the system classpath. As a result, this class cannot be reloaded while the server is running. To prevent this behavior in the future, make sure the class is not located in the server classpath.>
<Jul 9, 2013 7:35:49 PM CDT> <Warning> <EJB> <BEA-010001> <While deploying EJB 'ActionsService_AsyncResponseProcessorMDB', class oracle.j2ee.ws.server.jaxws.AsyncResponseProcessorMDB was loaded from the system classpath. As a result, this class cannot be reloaded while the server is running. To prevent this behavior in the future, make sure the class is not located in the server classpath.>
<Jul 9, 2013 7:36:57 PM CDT> <Warning> <Munger> <BEA-2156203> <A version attribute was not found in element web-app in the deployment descriptor in C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EPMServer0\tmp\servers\EPMServer0\tmp\_WL_user\SHAREDSERVICES_11.1.2.0\dt7o9d\interop.war/WEB-INF/web.xml. A version attribute is required, but this version of the Weblogic Server will assume that the JEE5 is used. Future versions of the Weblogic Server will reject descriptors that do not specify the JEE version.>
<Jul 9, 2013 7:38:12 PM CDT> <Warning> <Munger> <BEA-2156203> <A version attribute was not found in element application in the deployment descriptor in C:\Oracle\Middleware\odi\setup\manual\oracledi-agent\oraclediagent.ear/META-INF/application.xml. A version attribute is required, but this version of the Weblogic Server will assume that the JEE5 is used. Future versions of the Weblogic Server will reject descriptors that do not specify the JEE version.>
<Jul 9, 2013 7:38:12 PM CDT> <Warning> <Munger> <BEA-2156203> <A version attribute was not found in element application in the deployment descriptor in C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EPMServer0\tmp\servers\EPMServer0\tmp\_WL_user\oraclediagent\cn250y/META-INF/application.xml. A version attribute is required, but this version of the Weblogic Server will assume that the JEE5 is used. Future versions of the Weblogic Server will reject descriptors that do not specify the JEE version.>
<Jul 9, 2013 7:38:12 PM CDT> <Warning> <J2EE> <BEA-160140> <Unresolved optional package references (in META-INF/MANIFEST.MF): [Extension-Name: oracle.bam.odi.library, Specification-Version: 11.1.1, referenced from: C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EPMServer0\tmp\servers\EPMServer0\tmp\_WL_user\oraclediagent\cn250y]. Make sure the referenced optional package has been deployed as a library.>
<Jul 9, 2013 7:38:13 PM CDT> <Emergency> <Deployer> <BEA-149259> <Server 'EPMServer0' in cluster 'EPMServer' is being brought up in administration state due to failed deployments.>
Hyperion Provider Services - Release 11.1.2.3.4408
Copyright (c) 1991, 2013 Oracle and / or its affiliates. All rights reserved.
connection mode : HTTP
essbase.properties: C:\Oracle\Middleware\EPMSystem11R1/common/EssbaseJavaAPI/11.1.2.0/bin/essbase.properties
java System properties -DESS_ES_HOME: C:\Oracle\Middleware\EPMSystem11R1/common/EssbaseJavaAPI/11.1.2.0
Mode: Non Fusion read from Registry
registry.isRegistryDatabaseCreated()true
Registry was initialized sucessfully
Component was found from component type DISC_MAN_PRODUCT
Updating version Disclosure_dbVersion with DISC_MAN_PRODUCT
Warning: Starting ADF Library jar post-deployment on WebLogic Server. Is "provider-lazy-inited" init-param missing from LibraryFilter? Ignore this warning if the ADFJspResourceProvider is not being used.
Started: ADF Library non-ADFJspResourceProvider post-deployment
Finished: ADF Library non-ADFJspResourceProvider post-deployment (millis): 46
Essbase® Administration Services - Version 11.1.2.3.000.4415
Copyright © 1991, 2013 Oracle and/or its affiliates. All rights reserved. Oracle and Java are registered trademarks of Oracle and/or its affiliates. Other names may be trademarks of their respective owners. No portion hereof may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying, recording, or information storage and retrieval systems, for any purpose other than the recipient's personal use, without the express written permission of Oracle.
US Patent Number 5,359,724
US Patent Number 6,317,750
Current time stamp: Tue Jul 09 19:38:54 CDT 2013
Server started successfully
Waiting for client requests
HRContextListener::contextInitialized
Warning: Starting ADF Library jar post-deployment on WebLogic Server. Is "provider-lazy-inited" init-param missing from LibraryFilter? Ignore this warning if the ADFJspResourceProvider is not being used.
Started: ADF Library non-ADFJspResourceProvider post-deployment
Finished: ADF Library non-ADFJspResourceProvider post-deployment (millis): 203
- WEBLOGIC
null
- The AMHM configuration file path is..nullconf
- getting attributes for bsp.jsr: [Migration, Ant-Version, Manifest-Version, Created-By, Version]
- going to get value for Migration attribute
- Encryption Type : AES
- Invocation of generateSecurityFile Successful
- userName :
- ServiceID :
- applicationName :
- Configuration File (config.xml) does not exist under C:\Oracle\Middleware\user_projects\epmsystem1\Planning\planning1\config.xml Process aborted.
- Migration Failed
Utf8Filter: forceRequestCharacterEncoding set to true (init-param=true)
Utf8Filter: repairRequestParameters set to false (init-param=false)
Utf8Filter: rebuildPathInfo set to false (init-param=false)
Utf8Filter: revertRequestURI set to true (init-param=true)
Utf8Filter: settings are true/false/false/true
Initializing CORBA ORB.
CORBA ORB initialization complete.
Loading configuration from registry
WSBaseServlet.setDefaultGSMContext(): Servlet GSM context. host=192.168.204.1:6800
Log configuration: file:/C:/Oracle/Middleware/user_projects/epmsystem1/ReportingAnalysis/RAFrameworkWebapp/WEB-INF/logging.properties
<Jul 9, 2013 7:39:39 PM CDT> <Notice> <Cluster> <BEA-000197> <Listening for announcements from cluster using unicast cluster messaging>
<Jul 9, 2013 7:39:39 PM CDT> <Notice> <Cluster> <BEA-000133> <Waiting to synchronize with other running members of EPMServer.>
<Jul 9, 2013 7:39:44 PM CDT> <Warning> <Log Management> <BEA-170011> <The LogBroadcaster on this server failed to broadcast log messages to the admin server. The Admin server may not be running. Message broadcasts to the admin server will be disabled.>
<Jul 9, 2013 7:40:09 PM CDT> <Notice> <Server> <BEA-002613> <Channel "Default[7]" is now listening on fe80:0:0:0:0:5efe:c0a8:ed01:9000 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
<Jul 9, 2013 7:40:09 PM CDT> <Notice> <Server> <BEA-002613> <Channel "Default[9]" is now listening on fe80:0:0:0:0:100:7f:fffe:9000 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
<Jul 9, 2013 7:40:09 PM CDT> <Notice> <Server> <BEA-002613> <Channel "Default[13]" is now listening on 0:0:0:0:0:0:0:1:9000 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
<Jul 9, 2013 7:40:09 PM CDT> <Notice> <Server> <BEA-002613> <Channel "Default[3]" is now listening on fe80:0:0:0:0:5efe:c0a8:cc01:9000 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
<Jul 9, 2013 7:40:09 PM CDT> <Notice> <Server> <BEA-002613> <Channel "Default[5]" is now listening on fe80:0:0:0:0:5efe:c0a8:7:9000 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
<Jul 9, 2013 7:40:09 PM CDT> <Notice> <Server> <BEA-002613> <Channel "Default[12]" is now listening on 127.0.0.1:9000 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
<Jul 9, 2013 7:40:09 PM CDT> <Notice> <Server> <BEA-002613> <Channel "Default[8]" is now listening on fe80:0:0:0:3415:3499:e650:c29e:9000 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
<Jul 9, 2013 7:40:09 PM CDT> <Notice> <Server> <BEA-002613> <Channel "Default[10]" is now listening on fe80:0:0:0:2d02:d309:55d5:a150:9000 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
<Jul 9, 2013 7:40:09 PM CDT> <Notice> <Server> <BEA-002613> <Channel "Default[11]" is now listening on fe80:0:0:0:5894:d88c:c022:f32b:9000 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
<Jul 9, 2013 7:40:09 PM CDT> <Notice> <Server> <BEA-002613> <Channel "Default[1]" is now listening on 192.168.204.1:9000 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
<Jul 9, 2013 7:40:09 PM CDT> <Notice> <Server> <BEA-002613> <Channel "Default[2]" is now listening on 192.168.0.7:9000 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
<Jul 9, 2013 7:40:09 PM CDT> <Notice> <Server> <BEA-002613> <Channel "Default[6]" is now listening on fe80:0:0:0:c885:cffb:be7a:3e0b:9000 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
<Jul 9, 2013 7:40:09 PM CDT> <Notice> <Server> <BEA-002613> <Channel "Default[4]" is now listening on fe80:0:0:0:1d4d:5292:d06b:f62b:9000 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
<Jul 9, 2013 7:40:09 PM CDT> <Notice> <Server> <BEA-002613> <Channel "Default" is now listening on 192.168.237.1:9000 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
<Jul 9, 2013 7:40:09 PM CDT> <Notice> <WebLogicServer> <BEA-000358> <Started WebLogic Independent Managed Server "EPMServer0" for domain "EPMSystem" running in Production Mode>
<Jul 9, 2013 7:40:09 PM CDT> <Warning> <Server> <BEA-002611> <Hostname "SUBHASUBBU", maps to multiple IP addresses: 192.168.204.1, 192.168.237.1, 192.168.0.7, fe80:0:0:0:c885:cffb:be7a:3e0b%18, fe80:0:0:0:1d4d:5292:d06b:f62b%20, fe80:0:0:0:3415:3499:e650:c29e%15>
<Jul 9, 2013 7:40:09 PM CDT> <Warning> <JMX> <BEA-149510> <Unable to establish JMX Connectivity with the Adminstration Server AdminServer at <JMXServiceURL:null>.>
<Jul 9, 2013 7:40:11 PM CDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to ADMIN>
<Jul 9, 2013 7:40:11 PM CDT> <Notice> <WebLogicServer> <BEA-000360> <Server started in ADMIN mode>
<Jul 9, 2013 8:11:16 PM CDT> <Error> <JDBC> <BEA-001112> <Test "SELECT 1 FROM HSS_COMPONENT_TYPES WHERE 1 = 0" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLNonTransientConnectionException: [FMWGEN][SQLServer JDBC Driver]socket write error: Connection reset by peer.".>
<Jul 9, 2013 8:11:16 PM CDT> <Error> <JDBC> <BEA-001112> <Test "SELECT 1 FROM V8_VERSION WHERE 1 = 0" set up for pool "raframework_datasource" failed with exception: "java.sql.SQLNonTransientConnectionException: [FMWGEN][SQLServer JDBC Driver]socket write error: Connection reset by peer.".>
<Jul 9, 2013 8:11:54 PM CDT> <Warning> <Socket> <BEA-000449> <Closing socket as no data read from it on fe80:0:0:0:c885:cffb:be7a:3e0b:54,190 during the configured idle timeout of 5 secs>
<Jul 9, 2013 8:12:04 PM CDT> <Warning> <Socket> <BEA-000449> <Closing socket as no data read from it on fe80:0:0:0:c885:cffb:be7a:3e0b:54,198 during the configured idle timeout of 5 secs>
<Jul 9, 2013 8:12:19 PM CDT> <Warning> <Socket> <BEA-000449> <Closing socket as no data read from it on 0:0:0:0:0:0:0:1:54,216 during the configured idle timeout of 5 secs>
<Jul 9, 2013 8:12:41 PM CDT> <Error> <JDBC> <BEA-001112> <Test "SELECT 1 FROM HSS_COMPONENT_TYPES WHERE 1 = 0" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLNonTransientConnectionException: [FMWGEN][SQLServer JDBC Driver]socket write error: Connection reset by peer.".>
<Jul 9, 2013 8:12:41 PM CDT> <Error> <JDBC> <BEA-001112> <Test "SELECT 1 FROM ARM_ATTRIBUTES WHERE 1 = 0" set up for pool "accountreconciliation_datasource" failed with exception: "java.sql.SQLNonTransientConnectionException: [FMWGEN][SQLServer JDBC Driver]socket write error: Connection reset by peer.".>
<Jul 9, 2013 8:12:41 PM CDT> <Error> <JDBC> <BEA-001112> <Test "SELECT 1 FROM AIF_LOOKUP_MAPPINGS WHERE 1 = 0" set up for pool "aif_datasource" failed with exception: "java.sql.SQLNonTransientConnectionException: [FMWGEN][SQLServer JDBC Driver]socket write error: Connection reset by peer.".>
<Jul 9, 2013 8:12:41 PM CDT> <Error> <JDBC> <BEA-001112> <Test "SELECT 1 FROM CALCMGRCONFIG WHERE 1 = 0" set up for pool "calc_datasource" failed with exception: "java.sql.SQLNonTransientConnectionException: [FMWGEN][SQLServer JDBC Driver]socket write error: Connection reset by peer.".>
<Jul 9, 2013 8:12:41 PM CDT> <Error> <JDBC> <BEA-001112> <Test "SELECT 1 FROM DISCMAN_COUNTER WHERE 1 = 0" set up for pool "discman_datasource" failed with exception: "java.sql.SQLNonTransientConnectionException: [FMWGEN][SQLServer JDBC Driver]socket write error: Connection reset by peer.".>
<Jul 9, 2013 8:12:46 PM CDT> <Error> <JDBC> <BEA-001112> <Test "SELECT 1 FROM SERVERLOGID WHERE 1 = 0" set up for pool "eas_datasource" failed with exception: "java.sql.SQLNonTransientConnectionException: [FMWGEN][SQLServer JDBC Driver]socket write error: Connection reset by peer.".>
<Jul 9, 2013 8:12:46 PM CDT> <Error> <JDBC> <BEA-001112> <Test "SELECT 1 FROM FCC_USER_ATTRIBUTES WHERE 1 = 0" set up for pool "financialclose_datasource" failed with exception: "java.sql.SQLNonTransientConnectionException: [FMWGEN][SQLServer JDBC Driver]socket write error: Connection reset by peer.".>
<Jul 9, 2013 8:12:46 PM CDT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from SNP_LOC_REP" set up for pool "odiMasterRepository" failed with exception: "java.sql.SQLNonTransientConnectionException: [FMWGEN][SQLServer JDBC Driver]socket write error: Connection reset by peer.".>
<Jul 9, 2013 8:12:46 PM CDT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from SNP_LOC_REP" set up for pool "odiMasterRepository" failed with exception: "java.sql.SQLException: [FMWGEN][SQLServer JDBC Driver]Object has been closed.".>
<Jul 9, 2013 8:12:46 PM CDT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from SNP_LOC_REPW" set up for pool "odiWorkRepository" failed with exception: "java.sql.SQLNonTransientConnectionException: [FMWGEN][SQLServer JDBC Driver]socket write error: Connection reset by peer.".>
<Jul 9, 2013 8:12:46 PM CDT> <Error> <JDBC> <BEA-001112> <Test "SELECT 1 FROM HSPSYS_CLUSTER WHERE 1 = 0" set up for pool "planning_datasource" failed with exception: "java.sql.SQLNonTransientConnectionException: [FMWGEN][SQLServer JDBC Driver]socket write error: Connection reset by peer.".>
<Jul 9, 2013 8:12:46 PM CDT> <Error> <JDBC> <BEA-001112> <Test "SELECT 1 FROM HPM_APPLICATION WHERE 1 = 0" set up for pool "profitability_datasource" failed with exception: "java.sql.SQLNonTransientConnectionException: [FMWGEN][SQLServer JDBC Driver]socket write error: Connection reset by peer.".>
<Jul 9, 2013 8:18:49 PM CDT> <Warning> <Socket> <BEA-000449> <Closing socket as no data read from it on fe80:0:0:0:c885:cffb:be7a:3e0b:54,579 during the configured idle timeout of 5 secs>
<Jul 9, 2013 8:22:29 PM CDT> <Warning> <Socket> <BEA-000449> <Closing socket as no data read from it on fe80:0:0:0:c885:cffb:be7a:3e0b:54,820 during the configured idle timeout of 5 secs>
<Jul 9, 2013 8:29:44 PM CDT> <Warning> <Socket> <BEA-000449> <Closing socket as no data read from it on fe80:0:0:0:c885:cffb:be7a:3e0b:55,178 during the configured idle timeout of 5 secs>

First of all "I installed 11.1.2.3 in windows 7 ultimate OS", it is not a supported OS so if you want assistance problem solving you should stick with a supported OS.
It also looks like you have installed a whole range of products some requiring additional configuration and the requirement of SOA.
I recommend starting with a support OS and only install products that are required.
Cheers
John
http://john-goodwin.blogspot.com/

DADs on WLS 11g (version 10.3.6.0) do not work (Error 404--Not Found)

Actually we use Application Server 10g (version 10.1.2.3.0) for different Forms 10g Applications (roundabout 1000 Forms) and want to change to Forms 11g and Weblogic Server 11g (version 10.3.6.0). A Test-Application on the Weblogic Server works fine, but DAD’s do not work at all.
In Enterprise Manager 10g i can configure DADs within the GUI of the Enterprise Manager, where i can see, if a connection could be established or not.
In Enterprise Manager 11g Fusion Middleware Control this doesn't seem to exist anymore, so i tried to configure the DADs manually, but something has to be wrong or missing, because there is no connection to the database and the following error appears:
Error 404--Not Found
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
10.4.5 404 Not Found
The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent.
If the server does not wish to make this information available to the client, the status code 403 (Forbidden) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through some internally configurable mechanism, that an old resource is permanently unavailable and has no forwarding address.
I added several DAD’s to /opt/oracle/product/Middleware/asinst_1/config/OHS/ohs1/mod_plsql/dads.conf like this:
<Location /pls/jd-download-dev>
SetHandler pls_handler
Order allow,deny
Allow from All
AllowOverride None
PlsqlDatabaseUsername w_web_user_download
PlsqlDatabasePassword @BWKChfgPacV6yQL40lIKZqXUUA9wC4cmAw==
PlsqlDatabaseConnectString jddev TNSFormat
PlsqlNLSLanguage German_Germany.WE8ISO8859P1
PlsqlAuthenticationMode Basic
PlsqlDefaultPage w_anwendung.p_web_show_document
PlsqlAlwaysDescribeProcedure Off
PlsqlErrorStyle DebugStyle
</Location>
The passwords were obfuscated with dadTool.pl and the http-Server restarted with /opt/oracle/product/Middleware/asinst_1/bin/opmnctl restartproc process-type=OHS
The files /opt/oracle/product/Middleware/asinst_1/config/OHS/ohs1/mod_plsql.cache.conf and /opt/oracle/product/Middleware/asinst_1/config/OHS/ohs1/moduleconf.plsql.conf were left unchanged.
Our Test-Application generates the following link
'http://172.106.2.7:9001/pls/jddevdev/B_ARCHIVE.P_ARCHIVE_VIEW?docfid=200'
that seems to be ok, because when i replace IP and port with our old IAS it works fine, but the WebLogic Server generates the above mentioned error.
To get some more information i searched an error_log in /opt/oracle/product/Middleware/asinst_1/diagnostics/logs/OHS/ohs1 but there isn’t any.
I used the following Documentation for configuring the DADs which is for HTTP Server 11g Release 1 (version 11.1.1), because I could not find one for version 10.3.6.0:
http://docs.oracle.com/cd/E23943_01/web.1111/e10144/under_mods.htm#i1055269
So probably there are differences between configuring version 10.3.6.0 and version 11.1.1 and so something is wrong configured or missing...
Thank you in advance for your help
Udo

Hi Raj,
it is a Sparc Solaris 10
and yes that's my enviorment.
After some more tests it's seems it's not a real bug but no realy nice working solution.
Eclipse uses for all instances the same secure storage, where OEPE also saves the password.
And if I look right the pasword was saved without the user context, so if you use an other user he takes the same password from the old user.
and I doesn't know how do OEPE check the connection in reality or only reply the last failed login message.
After deleting the complete secure storage and test it again with the juno version it works well.

Error "Application not found" from SICF while trying to test WD service

Similar Messages

Maybe you are looking for