"Error: Application Not Found" Help?

Hey everybody, I was just wondering if anyone could help me out here. Everytime I go to open iTunes, I get an error saying "Application Not found" and I don't know why. I did some researching and heard that Nortons Anti virus might be the problem. WhichI think is probably true because Iinstalled Norton, ran a virus scan, and I can't open quite a few files. iTunes, FireFox, Google Chrome, etc... Anyone know how to fix it? I've uninstalled iTunes and re-installed it and nothing. I also went to the settings in Norton and changed iTunes from 'Auto' to 'Allow' but it still won't work. Any one know what to do?

I figured out the problem - no need to reply.
I mistakenly added an authentication scheme instead of an authorization scheme.
Fixed it - works fine.
Thanks,
David

Similar Messages

Error "Application not found" from SICF while trying to test WD service

Hi All,
I am getting an error as "Application not found" when i am trying to test my web dynpro component service from SICF.
This service is active as well.
But when i copied the same URL and pasted it in browser then my web dynpro component opened.
And i am able to open my web dynpro compoent from SE80 also.
Regards,
Amar

Hi All,
Is is related to browser, because i am using IE8.
But the only doubt i have is when i am pasting the URL in IE8 then it is loading the WD page.
Regards,
Amar

Nested RSLs - Verify Error "Class not Found" Help

Hi there,
I have 2 library projects and one Application:
TweenMax
MyLibrary
MyApplication
If I make TweenMax into an RSL with these compiler arguments:
-compute-digest=true -directory=true -output=rsl
And I make MyLibrary into an RSL with these compiler arguments
-compute-digest=true -allow-source-path-overlap=true -directory=true -output=rsl
(I need that -allow-source-path-overlap=true so I can use the classes in MyApplication it seems)
... And then I load the 2 libraries into MyApplication from "Flex Build Path" -> "Library Path" -> "Add Project", and I specify LinkType is RSL, and then I run MyApplication, I get the VerifyError:
VerifyError: Error #1014: Class ..a class.. could not be found.
I've tried adding a "crossdomain.xml" file to the root of MyLibrary and of MyApplication (at MyLibrary/crossdomain.xml or MyApplication/crossdomain.xml), with content:
<cross-domain-policy>
<allow-access-from domain="*" to-ports="*"/>
</cross-domain-policy>
But that doesn't change anything. I am running this locally on a Mac (/Users/Lance/Documents/Flex Builder 3/MyApplication). What am I doing wrong here? Is it even possible to do nested RSLs like this?
Thanks,
Lance

I think you meant "External" when you said "LinkType = Extended".
This isn't really nested RSLs. By linking a library as External you have made that library's RSL dependent on the External library's RSLs.
In your example MyLibrary is compiled with TweenMax as an external library. This means MyLibrary's RSL is dependent on TweemMax's RSL. The dependency requires MyApplication to load the TweenMax RSL before the MyLibrary RSL.
-Darrell

BEA/Weblogic:Error 404- not found help

I am trying to follow an example in Bea weblogic Server for Dummies and I got that error when trying to test the web application.
Follow these steps to create a web application:
1. Make sure that WebLogic is not running.
If you started WebLogic from the Start menu, simply close WebLogic’s
window. If you started WebLogic as a service, stop the service.
2. Create your application directory.
Choose a name for your web application and create a directory of the
same name in your domain’s applications directory. For example, if
you wanted to create an application named myapp, you would create a
directory named
c:\bea\user_projects\mydomain\applications\myapp
3. Create an index file named index.html.
Create an index file that will be displayed when the user visits your web
site. Listing 5-1 shows a sample index file.
4. Create your WEB-INF directory.
The WEB-INF directory holds configuration files needed by your web
application. You should create a WEB-INF directory within the directory
you created in Step 2. If your web application were named myapp, for
example, your WEB-INF directory would be named
c:\bea\user_projects\mydomain\applications\myapp\WEB-INF
5. Create a web application descriptor named web.xml and save it in the
WEB-INF directory.
index.html File:
<html>
<head>
<title>Welcome</title>
</head>
<body>
<h1>Welcome</h1>
</body>
</html>
web.xml file:
<?xml version=”1.0” encoding=”UTF-8” ?>
<!DOCTYPE web-app PUBLIC
“-//Sun Microsystems, Inc.//DTD Web Application 2.3//EN”
“http://java.sun.com/dtd/web-app_2_3.dtd” >
<web-app>
<display-name>Example Application</display-name>
</web-app>
When I tried to test the application with http://localhost:7001/myapp, I get that 404 error.
Appreciate any advice given. Thanks.

I am trying to follow an example in Bea weblogic Server for Dummies and I got that error when trying to test the web application.
Follow these steps to create a web application:
1. Make sure that WebLogic is not running.
If you started WebLogic from the Start menu, simply close WebLogic’s
window. If you started WebLogic as a service, stop the service.
2. Create your application directory.
Choose a name for your web application and create a directory of the
same name in your domain’s applications directory. For example, if
you wanted to create an application named myapp, you would create a
directory named
c:\bea\user_projects\mydomain\applications\myapp
3. Create an index file named index.html.
Create an index file that will be displayed when the user visits your web
site. Listing 5-1 shows a sample index file.
4. Create your WEB-INF directory.
The WEB-INF directory holds configuration files needed by your web
application. You should create a WEB-INF directory within the directory
you created in Step 2. If your web application were named myapp, for
example, your WEB-INF directory would be named
c:\bea\user_projects\mydomain\applications\myapp\WEB-INF
5. Create a web application descriptor named web.xml and save it in the
WEB-INF directory.
index.html File:
<html>
<head>
<title>Welcome</title>
</head>
<body>
<h1>Welcome</h1>
</body>
</html>
web.xml file:
<?xml version=”1.0” encoding=”UTF-8” ?>
<!DOCTYPE web-app PUBLIC
“-//Sun Microsystems, Inc.//DTD Web Application 2.3//EN”
“http://java.sun.com/dtd/web-app_2_3.dtd” >
<web-app>
<display-name>Example Application</display-name>
</web-app>
When I tried to test the application with http://localhost:7001/myapp, I get that 404 error.
Appreciate any advice given. Thanks.

I have windows 7 and using windows live the system will not link thru - comes up with comment application not found HELP please

previous version was fine but since downloading v4 have been unable to link thru from any emails received.

Read this. You need to be running Snow Leopard or later.
http://support.apple.com/kb/ht3986

PCUI Application Not Found eRROR

I would like to use the PCUI, so I was advised to go to transaction se80 select BSP Application from the drop down,type in CRM_BSP_FRAME, click the display button and then click on Pages with Flow Logic. Right click on select.htm and click on test.
This is suppossed to open a browser window where I can find list of BSP Application. Unfortunately whenever click on test I get an error "Application Not Found" together with the url whihc was meant to lead me to
the BSP.
Could anyone help me on this one, we are implementing CRM 4.0 and need it for case management as as other pcui business processes.
We also are implementing the Enterprise Portal, just letting you maybe you caould advise on how best to go about this scenario.

Thank you so much Manuel, Frederick, and SAP Addict for the assistance, you know what I think its my computer that has a problem, because I decided to login from another machine and fortunately when I tried to open the PCUI it did not give me the No Application Error Found message. Instead it is giving me a Network Access Message Error.
On the other hand when I use the machine upon which the <i>Enterprise Portal</i> is being developed, I receive the following error:
<i>"This browser is not supported"</i>of which the default browser is Mozilla. We changed it back to Internet Exp, and the error this time after I logged using my GUI user name and password was a RABAX30 error.
So with regards my error <i>"Application Not Found eRROR"</i> what could be the possible cause, could it be that there are some GUI componentes missing or what???????
Oh I rewarded points to each of you guys, may you please continue with the support will sure reward points

Test_fwktutorial error. Application not found

I have been worked on this for a whole day.
I installed Jdeveloper for RUP6 and went through all the set up ( Task 1-6 ). However, I got pop up error -- Application not found when I tried test_fwktutorial.jsp.
I have verified the database connection is valid. The user name and password id valid.
Application -> AK
Responsibility -> FWK_TBX_TUTORIAL
Embedded OC4J -> Host Name -> Default Local IP Address.
What elso Do I need to check for this error?
[Starting OC4J using the following ports: HTTP=8989, RMI=23892, JMS=9228.]
C:\JDEV\jdevbin\jdk\bin\javaw.exe -client -classpath C:\JDEV\jdevbin\j2ee\home\oc4j.jar;C:\JDEV\jdevbin\jdev\lib\jdev-oc4j.jar -Xbootclasspath/p:C:\JDEV\jdevbin\jdev\appslibrt\ojdbc14.jar;C:\JDEV\jdevbin\jdev\appslibrt\nls_charset12.zip -DFND_JDBC_STMT_CACHE_SIZE=200 -DCACHENODBINIT=true -DRUN_FROM_JDEV=true -mx256m -Doracle.j2ee.dont.use.memory.archive=false; -Duser.language=en -Duser.region=US -Duser.country=US -Xverify:none -Doracle.j2ee.dont.use.memory.archive=true -Doracle.j2ee.http.socket.timeout=5000 com.evermind.server.OC4JServer -config C:\JDEV\jdevhome\jdev\system9.0.3.5.1453\oc4j-config\server.xml
[waiting for the server to complete its initialization...]
Ready message received from Oc4jNotifier.
Embedded OC4J startup time: 1594 ms.
Auto-deploying OA Framework web application deployment descriptor (New server version detected)...
Oracle9iAS (9.0.3.1.0) Containers for J2EE initialized
Access is denied.

The problem is due to the default web browser not set. I found out the solution on the web. After reset the default web browser, I was able to run the 'Hello World' Page.
Thank you for the response.
To resolve the problem, use the Default Programs feature in Windows Vista to reset the default Web browser preference.
Reset the default web browser
Step 1
1. Click Start, Default Programs
2. Click Set your default programs
3. Select your web browser from the list
4. Click Set this program as default
5. Click OK.
Then follow these steps:
Step 2
1. Click Set program access and computer defaults
2. Click Continue if you see the User Account Control prompt.
3. Click Custom
4. Select your web browser from the list
5. Click OK.

USB flash memory: "application not found" error

When recently trying to use a USB flash memory stick I was getting an "f:\ application not found" error. I tried all kinds of fixes from Microsoft. Turns out it was caused by Lightroom.
Since the memory stick had photos on it, my computer's Autoplay was trying to launch Lightroom. Problem is, Lightroom is listed as "Lightroom 4.0 64" in the Autoplay menu. I have Lightroom 4.4. As far as I can tell, there's no way I can fix the incorrect "Lightroom 4.0 64" listing. The solution is to remove Lightroom from any Autoplay options.
This is the second such problem I've had with Lightroom. The previous problem was right clicking on a photo file and trying to use the "open with" menu. It worked fine when I had Lightroom 4.3. After updating to Lightroom 4.4, it didn't work. Another Lightroom user found a workaround, which was to rename the Lightroom 4.4 folder back to Lightroom 4.3.
These are both lazy Adobe oversights. You have to realize all the Windows functions that will be affected with an update and make sure they are updated as well. I spent half a day solving this latest USB flash memory error. Get your updating act together.

You don't mention your OS or which version of Outlook you're using.
For Windows, this may be helpful:
http://www.winhelponline.com/articles/236/1/Unable-to-open-PDF-attachments-from-Windows-Ma il.html
Noel

"Application not found" error after deploying

Hi,
I am getting error as "Application not found" after deploying.
When I depoly the project am getting Finished Deployment message in the Deploy Output View followed by a popup message "Application not found".
Please help me in solving this error.
Regards,
Rajesh A

HI,
Enabled application is much different than started application.
When you deploy an application then by default it is in enables state.
under general tab you can see whether application is started or not?
and in reference tab you can see. all the referred application and components. and there you'll know which components is giving problem to your application
so check these tabs and let me know

"Application Not Found" CS4 installation error

Problem: "Application Not Found" CS4 installation error
Some Adobe Creative Suite CS4 Production Premium distribution disks issue an "Application not found" error while loading Disk 2 due to an error in the Autorun.inf file.
Does your Autorun.inf for Disk 2, 3, or 4 contain
[autorun]
open=Autoplay.exe -auto
icon=\csppdvd.ico
Autorun.inf should instead only say
[autorun]
icon=\csppdvd.ico
There should not be the line
open=Autoplay.exe auto
Only Disk 1 should have this line.
On Disk 1, Adobe has a file called Autoplay.exe which starts the installation.
"open=Autoplay.exe auto" runs the Autoplay application.
Autoplay.exe is not on Disk 2, 3, or 4 so having the open line generates the error.
Since you cannot edit the DVD, the trick is to turn off autorun so Windows doesn't run Autorun.inf upon loading Disk 2. Look at the Wikipedia description of "Autorun" for details. Wikipedia describes how to disable Autorun using
Start -> Run -> gpedit.msc
You will need to do this for XP. Vista has a Control Panel which allows you to "Take no action" for "Software and games". If this does not work, use gpedit.msc instead. You will know Autorun is off if upon inserting Disk 1, no installation window appears.
Wikipedia notes that "AutoPlay is the name of a different feature in Microsoft Windows" not to be confused with Autorun starting the Autorun.inf file.
Now that Autorun is off, manually double click Autoplay.exe on Disk 1 to start the installation. Disk 2 should now load properly.
By the way, it appears you cannot teach an old dog new tricks. Some Adobe Creative Suite CS3 Production Premium distribution disks had the same problem. Obviously, Adobe did not learn from their past mistake.
You may want to call Adobe to obtain replacement disks which don't have this error.
(800) 642-3623 Adobe Technical Support
(800) 833-6687 Adobe Customer Support

Petrula,
Can you look at the DVDs and send me the numbers you find on the inner edge? Also, any numbers on the outer DVD sleeves. This can help us to identify which sets of media are affected and possibly resolve it, or at least more specifically target solution information.
Thank you!

Error "Error ERR-1014 Application not found. " after Installing APEX 40

Hello,
i have installed apex 4 to an existing apex 3.2 installation (oracle 11g windows) with oracle http Server.
i follow the installations guide and install the full version.
I try to call "http://dmsapex:7777/pls/apex/apex_admin" and it works and i can admin my application and see my existing workspace
i try to call "http://dmsapex:7777/pls/apex/apex" and it does not work. i get follw error message in the browser (IE8):
-->
application=4500 workspace=10
Error ERR-1014 Application not found.
OK
<--
I search in several forums and find " convert runtime into fullversion". I have installed "@apexins SYSAUX SYSAUX TEMP /i/". I try "@apxdvins" but it does not work.
C:\oracle\oraweb\ohs\logs/error.log says:
[Wed Jul 14 16:11:31 2010] [alert] mod_plsql: DMS failure: NounGetRoot failed. Disabling DMS
[Wed Jul 14 16:11:32 2010] [alert] mod_plsql: DMS failure: NounGetRoot failed. Disabling DMS
[Wed Jul 14 16:11:32 2010] [notice] Oracle-Application-Server-10g/10.1.3.1.0 Oracle-HTTP-Server configured -- resuming normal operations
[Wed Jul 14 16:11:32 2010] [notice] Server built: Apr 12 2007 00:25:24
[Wed Jul 14 16:11:32 2010] [notice] Parent: Created child process 3280
[Wed Jul 14 16:11:33 2010] [alert] mod_plsql: DMS failure: NounGetRoot failed. Disabling DMS
[Wed Jul 14 16:11:34 2010] [alert] mod_plsql: DMS failure: NounGetRoot failed. Disabling DMS
[Wed Jul 14 16:11:34 2010] [notice] Child 3280: Child process is running
[Wed Jul 14 16:11:34 2010] [notice] FastCGI: process manager initialized
[Wed Jul 14 16:11:34 2010] [notice] Child 3280: Acquired the start mutex.
[Wed Jul 14 16:11:34 2010] [notice] Child 3280: Starting 250 worker threads.
Have someone the same problem? Or does sombody knows a solution?
Thanks for help
CZI

Thanks mo**** . I executed @apxdvins from my extracted oracle directory using the followin procedure and it was working properly.
Start/Run
CMD
You need to change your directory to the directory where apxdvins.sql iis available. Mostly this is Apex extracted directory.
$ SQLPLUS/NOLOG
SQL> CONNECT SYS AS SYSDBA
@apxdvins
This will take some time.
If you want you can also do this extra steps in SQL mode:
shutdown
startup
alter user anonymous account unlock;
ALTER SESSION SET CURRENT_SCHEMA = APEX_040000;
Thanks and reards

When I try to update LR I get an error message Application not found

When I try to update LR I get an error message "Application not found".
When I try Help in LR it can't be found.
What is wrong?

Talked with Adobe support. Told me to go to Cloud app and log out, then log
in again and then update. Worked fine for me. Hope this helps!
Best regards,
Fredrik Moell
Tomatis New Zealand
www.tomatis.co.nz
A division of Your Amazing Health Ltd
54 Fancourt Street, Meadowbank, Auckland 1072
0800-TOMATIS (866 2847)
Personal 021-1721 930

How to fix application not found error

I'm running windows 7 and get Application Not Found error when clicking on link. What is the cure?

Hi,
Please click Start-> Run. Type command and press Enter. Type notepad and press Enter.
Copy all the text below:
Windows Registry Editor Version 5.00
[HKEY_CLASSES_ROOT\exefile\shell\open\command]
@="\"%1\" %*"
Save this as fix.reg to your Desktop (remember to select Save as file type: All files in Notepad.)
Double Click fix.reg and click YES for confirm.
Reboot the computer.
Regards,
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

Application not found error message

Everytime I try to download a purchased or free ebook (e.g. from Digital Editions site) I get the same error message: it lists the folder name of my temporary internet files\Content.IE5\Y9BKTFY\URLLink[22].acsm then it says Application not found. The code of numbers and letters changes but it is always the full address of the temporary internet folder and then acsm at the end. I have have reinstalled digital editions several times and I have 1.7.1079 version. I could download e-books before Christmas. I turned my firewall off but it didn't make any difference. I tried the bookshop I bought the books from but they couldn't help. I managed the first four from the free page of Digital Editions but not any more. I've tried searching for answers on-line and even opened a web case with Adobe but haven't heard anything. Can anyone help please?
thanks
Abi

Check this Apple document out -> Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
Try following the steps in that article, which will have you remove iTunes, Apple Application Support and the other bundled software. Make sure to follow the steps under Verify iTunes and related components are completely uninstalled too, then download and install iTunes again.

I can not get into some of my applications like Microsoft Office and OpenOffice and more, FireFox states application not found, but I have allways been able to pull them up. HELP! in English

When I click the start button there are a number of applications I should be able to click on and go into. Lately a box pops up and reads...Application Not Found. I have not had this problem before. I can not pull up PPT., Word or any applications. Even when I click on the Firefox icon to browse a box will pop up... Open With. Choose the program you want to use to open this file. File: firefox. exe. This never happened before. I am an online student at CTU and this is causing big problems in my studies. Can you help.

You can subscribe with only one email address. But this is just what you sign on with. Check your receipt to see which one you used to purchase with. No need to give up any others.

"Error: Application Not Found" Help?

Similar Messages

Maybe you are looking for