Error applying transforms during PSE 11 install

I cannot install Photoshop Elements 11. First attempt resulted in error 1336. There was an error creating a temporary file that is needed to complete this installation. After reading online help, I ran MSConfig as instructed, Selected Selective startup; hid Microsoft services and disabled everything else.
Upon rebooting, my computer would not work. From the Windows 7 DVD I ran the system repair tool. This ran CheckDisk evidently. After completing the computer now works properly.
But when I try to install Photoshop this error appears: Error applying transforms. Verify that the specified transform paths are valid.
After searching the web it appears that the issue is in the registry. I've cleaned the registry with CCleaner.
How can this be resolved?
Windows 7 64 bit

My IT support guy asked if I tried http://support.microsoft.com/mats/Program_Install_and_Uninstall which I had not. I ran it and it worked!

Similar Messages

'Error applying transforms' when trying to install Xcelsius 2008 fp3.2

Hello
I've just tried to install Xcelsius 2008 fp3.2 (I am currently on Xcelsius 2008 sp3). I did read the installation notes, and I wonder if the problem I had is related to the fact that I am not logged in as administrator (I'm on XP).
The package extracted and as the installer ran I got the message:
'Error applying transforms. Verify that the specified transform oaths are valid'.
Thanks
Phil

Hi Phil,
Can be...
To resolve this error, copy all files from the disc to a local computer location (for example, the desktop). Install Crystal Xcelsius from the setup.exe file at that location.
Hope this helps.
Kind Regards,
Marcio

Error applying transforms when trying to install Agent

Several Windows XP machines were experiencing problems that seemed to be associated with the ZENworks agent. I've tried to reinstall the agent using the Install Agent utility but I received the message:
"Workstation <computer name> Failed - Windows error 1624 (Error applying transforms. Verify that the specified transform paths are valid.)"
I tried uninstalling the agent on the local computers and received almost the same message:
"Error applying transforms. Verify that the transform paths are valid."
We are in a Windows Server 2003 environment. ZENworks Desktop Management is running on a NetWare 6.5 server. I just setup Middle Tier Server on a Win 2003 box. It's only the Windows XP machines that are giving me trouble. Distributing the agents to Windows 2000 boxes worked fine.

pbenjamin,
It appears that in the past few days you have not received a response to your posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com/ to search the knowledgebase and check the other support options available on that page under "Self Support" and "Support Programs".
- You could also try posting your message again. Make sure it is posted in the correct newsgroup. (http://support.novell.com/forums)
If this is a reply to a duplicate posting, please ignore and accept our apologies and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Adobe Acrobat Standard 9.5 Install Error: "Error applying transforms please ensure specified transform paths are valid". Any ideas on how to fix this?

I had Acrobat Standard 9.5 on a laptop that broke. Adobe Acrobat Standard is paid for and all I need. I had to get a new PC (Windows 8.1) and I did downloaded Standard 9.5 but when I went to install it the installer gave me an “Error applying transforms please ensure specified transform paths are valid”. Any ideas on how to fix this?

Rahul,
No error numbers other than the message I mentioned previously.
I tried the transforms repair and it reported no Acrobat product (correct, none yet installed) or no administrative privileges (I am the administrator and have done previous administrative actions).
When I unzip the Acrobat file this is what is in the setup ini file:
[Startup]
RequireOS=Windows XP
RequireMSI=3.0
RequireIE=6.0.2600.0
[Product]
msi=AcroStan.msi
Languages=1033;1031;1036
1033=English (United States)
1031=German (Germany)
1036=French (France)
CmdLine=TRANSFORMS="AcroStan.mst"
[Windows XP]
PlatformID=2
MajorVersion=5
MinorVersion=1
ServicePackMajor=2
[MSI Updater]
Path=WindowsInstaller-KB893803-v2-x86.exe
Thoughts?
Thanks again,
Tom

ERROR "Error Applying Transforms" while installing SAP integration kit.

i have currently installed
BusinessObjects Enterprise XI3.1 SP3
Live office
xcelsius 2008
Crystal reports 2008
now i want to install the integration KIT for SAP BO. But when i start the setup it gives the error "Error Applying Transforms. Verify that the transform parths are valid."
Need help on this.. please

Hi,
Try installing Windows uninstaller to uninstall the integration kit(the previous one) and installl the integration kit again. This will work.
Thanks
Washburn

When attempting to install downloaded update 5.6 for Lightroom: Error applying transforms.

When attempting to install downloaded update 5.6 for Lightroom I am having a Windows Installer error message: Error applying transforms. Verify that the specified transform paths are valid. I completely reinstalled the program and still got the same error when attempting to update. Creative Cloud lists the Lightroom 5.3 as "Up to Date". Please advise.
Also curious as to when the video issues will be updated: Every time I even attempt to import new pictures from a folder that has video footage Lightroom crashes. I have asked about this in the past and gotten no reply. I am rather disappointed in Adobe's customer support (or lack thereof).

"Error applying transforms. Verify that the specified transform - Microsoft Community

Reinstall Acrobat 8.1.4 "Error applying transforms"

I recently installed security update Acrobat 8.1.4 on my windows98 system. A few hours later, I sought to uninstall the same, so I could reinstall the entire program and gain the Adobe toolbars in Outlook (which were not displaying nor available). After the uninstallation, I put in the installation disc, and got an "error applying transforms."
A quick search of Google brought up this page: http://kb2.adobe.com/cps/404/kb404307.html which supposedly addresses the problem for Acrobat 8.x. I'm sure the little program works very well on 8.1.2 and 8.1.3. But there isn't any option for the very new 8.1.4 (as of the date of this writing, February 11 2011). I ran it anyway, and it informed me that it couldn't help me.
Interestingly, even after supposedly uninstalling, the program is still operational on the system, though all the acrobat icons are missing from displays in other programs. The uninstaller continues to appear in the uninstallation menu. Further attempts to use the uninstaller are met with the same error from installation- "error applying transforms."
Adobe support informed me that I would/could find the answers for my new problem here, even though 8.1.4 is a very recent update so it's a very recent problem. So, have at. How do you fix this?

You might try doing a Repair Acrobat installation (under the Help menu) first. Here are some additional troubleshooting tips -- such as deleting tmp files which Acrobat checks during the startup process.

Error applying transforms. Verify that the specified transform paths are valid.

In our enterprise environment, we recently used Group Policy to deploy a .msi package of Adobe Reader 9.3.1. In a few cases, the client was unable to successfully uninstall the older version of Adobe Reader and install version 9.3.1.
When an administrator attempts to manually install Adobe Reader 9.3.1 onto one of the client machines that experienced problems, they receive the following error message during the installation process:
"Error applying transforms. Verify that the specified transform paths are valid."
The Application Event Log will show that Adobe Reader 9.3 did not install:
Source: MsiInstaller
Event ID: 11708
Description: Adobe Reader 9.3. -- Installation failed
We have unsuccessfully attempted several suggested solutions...
http://kb2.adobe.com/cps/404/kb404307.html
This Adobe Knowledge Base is for Reader 8.x, but we decided to try anyway. When we run the kb404307.exe tool as an administrator, we get this error message:
"Acrobat Transforms Update did not find valid installed Acrobat products or you do not have sufficient privileges to update registry."
http://support.microsoft.com/kb/290301
We also saw advice to use the Windows Installer Cleanup utility (MSICUU2.exe) from Microsoft. This tool, however, has been discontinued and is no longer available.
Does anyone have any advice on how to install Adobe Reader 9.3.1 on a machine that is presenting the "Error applying transforms. Verify that the specified transform paths are valid." error during installation?

In our enterprise environment, we recently used Group Policy to deploy a .msi package of Adobe Reader 9.3.1. In a few cases, the client was unable to successfully uninstall the older version of Adobe Reader and install version 9.3.1.
When an administrator attempts to manually install Adobe Reader 9.3.1 onto one of the client machines that experienced problems, they receive the following error message during the installation process:
"Error applying transforms. Verify that the specified transform paths are valid."
The Application Event Log will show that Adobe Reader 9.3 did not install:
Source: MsiInstaller
Event ID: 11708
Description: Adobe Reader 9.3. -- Installation failed
We have unsuccessfully attempted several suggested solutions...
http://kb2.adobe.com/cps/404/kb404307.html
This Adobe Knowledge Base is for Reader 8.x, but we decided to try anyway. When we run the kb404307.exe tool as an administrator, we get this error message:
"Acrobat Transforms Update did not find valid installed Acrobat products or you do not have sufficient privileges to update registry."
http://support.microsoft.com/kb/290301
We also saw advice to use the Windows Installer Cleanup utility (MSICUU2.exe) from Microsoft. This tool, however, has been discontinued and is no longer available.
Does anyone have any advice on how to install Adobe Reader 9.3.1 on a machine that is presenting the "Error applying transforms. Verify that the specified transform paths are valid." error during installation?

Error Applying Transforms

I am trying to install A A XI after extraction and when opening the app I get error applying transforms and installation crashes.

run the cleaner, http://labs.adobe.com/downloads/acrobatcleaner.html
restart your computer
install acrobat xi

Adobe Acrobat 9.3.4 Update failure- "Error Applying Transforms, verify that the specified...

I have ignored this issue for long enough. I have Adobe CS4, with Acrobat Pro version 9.3.4. Windows 7. Acrobat updater pops up on my machine, and when I execute the update requested, the updater gives me the update failure message, with code 1604, "error applying transforms."
I have seen solutions posted for this tranforms message, but it was a problem with Acrobat 8. I have seen no solutions as of yet for Acrobat 9, so I thought I would post.
I also tried opening Acrobat 9 Pro, and under the help tab, I initiated "repair". I get the same transform error message as above. Any advice anyone? Should I just uninstall Acrobat 9 Pro and reinstall using my CS4 disk?
Thanks for the help!

If you have original CD with Acrobat installation, copy all files with extension .mst from this CD to the following location:
C:\Program Files (x86)\Adobe\Acrobat 9.0\Setup Files\[ProductCode] if this is 64bit system
or
C:\Program Files\Acrobat 9.0\Setup Files\[ProductCode] if this is 32bit system
where [ProductCode] is a unique value which identifies your language version of Acrobat 9 Pro.
If this is EFG version, it should be {AC76BA86-1033-F400-7760-000000000004}
If location does not exist, create it.
2. If you do not have original CD and cannot find .mst files, provide the exact Product name including language and I will provide further instructions.
Good luck

Microsoft Visual C++ Runtime Library Error in T430S during HP printer install

I just bought a T430S Windows 8 and I'm having problems installing the software and drivers for my HP Photosmart D-110-a printer. I've owned the printer for a year and it was no problem installing the software that it came with on my previous Dell Windows 7. Every time I try to install from the CD-Rom or download the software from HP, I get a Microsoft Visual C++ Runtime Library Error message. Please someone help!
By the way, I am able to print to the machine because I think HP printer driver was preloaded on the Start screen from Lenovo. Is it possible the reason why I can't install the software that the my HP printer came with, is because HP driver was preloaded? The issue of not being able to install the full software, is that I can't monitor ink levels or scan items from the computer.

It looks to me like HP never made a windows8 driver for that printer. You might read this:
http://h30434.www3.hp.com/t5/Printer-All-in-One-Software-Drivers-e-g-Windows-8/windows-8-driver-hp-p...

Installing Crystal Reports I get the following error "error applying t.....

"error applying transforms. verify that the specified transform paths are valid"
Installing on.
Win Server 2003
SQL 2005
I had a trial version which I uninstalled last week and now can not install.

within the registry (in Computer\HKey_CLASSES_ROOT\Installer\Products\) there was a folder that contained the Crystal install information.
I exported this to be safe and then deleted it. I was then able to install with no problems.

Error in applying transforms

A third party program doesn't recognize my Java runtime, so I would like to remove it and re-install. However, when I tried to remove it, I was getting "Error in applying transforms".
What does this mean? Is there another way to remove the Java runtime or re-install it?
Thanks a lot for your help.
Albert

hi albert..
Error Messages
((((((((((((( Error Applying Transforms ))))))))))))
This article applies to:
Platform(s):
Windows 98, Windows ME, Windows 2000 (SP4+), Windows XP (SP1 SP2), Windows 2003
JRE version(s):
1.4.2_xx
This error applies to:
Platform(s):
Windows NT, 98, ME, 2000, XP, and Server 2003
JRE version(s):
1.4.2_xx (xx can be 01-99)
SYMPTOMS
While attempting to install the Java 2 Runtime Environment, Standard Edition (JRE), a message box with the following error appears:
Error applying transforms. Verify that the specified transform paths are valid.
The installation fails.
CAUSE
The exact cause of this error is not known at this time.
SOLUTION
Following is the suggested workaround for this error.
Manually remove the 1.4.2_xx JRE:
Download Microsoft Windows Installer removal tool.
Run the tool and select the JRE entry for removal.
Manually install the 1.4.2_xx JRE:
Go to Start -> Run and type "cmd" (type "command" if you are using Windows 95, 98, or ME)
In the MSDOS windows, type the following:
msiexec.exe /i http://java.sun.com/webapps/download/GetFile/
1.4.2_04-b05/windows-i586/Java%202%20Runtime%20
Environment,%20SE%20v1.4.2_04.msi
Sun provides third-party contact information to help you find technical support. This contact information may change without notice. Sun does not guarantee the accuracy of this third-party contact information.
The third-party products that are discussed in this article are manufactured by companies independent of Sun. Sun makes no warranty, implied or otherwise, regarding the performance or reliability of these products.
(this page is xerox from )...
http://www.java.com/en/download/help/error_applying_transforms.xml

Error RW:50004 during install of R12 on win 2003

Hello,
I'm trying to install EBS R12 Express install with Vision DB via edelivery.
Had some issues with MSVC and cygwin paths, but it was resolved thanks to posts on the forum.
After about 20% of the installation [about 1hr 30mins into it], I get the following error:
RW-50004: Error code received when running external process. See log file for details.
Running Database install driver for VIS instance.
I wasn't sure which log file, so I checked the one under J:\Oracle\VIS\db\tech_st\10.2.0\appsutil\log\VIS_ora-apps\<random_number_here>.log
The relevant portion from the log file is:
<snip>
C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>REM Run RapidClone configuration step
C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>REM
C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>echo "Statusstring Configuring Database"
"Statusstring Configuring Database"
C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>(echo APPS & echo APPS ) | J:\OracleEBSR12_downloads\StageR12\startCD\Disk1\rapidwiz\jre\NT\1.5.0\bin\java -DCONTEXT_VALIDATED=true -mx512M -classpath .;J:\OracleEBSR12_downloads\StageR12\startCD\Disk1\rapidwiz\jlib\java;J:\OracleEBSR12_downloads\StageR12\startCD\Disk1\rapidwiz\jlib\xmlparserv2.jar;J:\OracleEBSR12_downloads\StageR12\startCD\Disk1\rapidwiz\jlib\ojdbc14.jar;J:\OracleEBSR12_downloads\StageR12\startCD\Disk1\rapidwiz\jlib\oui\OraInstaller.jar;J:\OracleEBSR12_downloads\StageR12\startCD\Disk1\rapidwiz\jlib\oui\ewt3.jar;J:\OracleEBSR12_downloads\StageR12\startCD\Disk1\rapidwiz\jlib\oui\share.jar;J:\OracleEBSR12_downloads\StageR12\startCD\Disk1\rapidwiz\jlib\oui\srvm.jar oracle.apps.ad.clone.ApplyDatabase -e J:\oracle\VIS\db\tech_st\10.2.0\appsutil\VIS_ora-apps.xml -stage J:\OracleEBSR12_downloads\StageR12\startCD\Disk1\rapidwiz -showProgress -phase cfg -nopromptmsg
Log file located at J:\oracle\VIS\db\tech_st\10.2.0\appsutil\log\VIS_ora-apps\ApplyDatabase_08300057.log
| 0% completed
<deleted many similar lines here....>
- 0% completed
\ 0% completed RC-50004: Fatal: Error occurred in ApplyDatabase:
Control file creation failed
C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>if 1 == 0 goto :CFG_OK
C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>echo "Cannot execute configure of database using RapidClone"
"Cannot execute configure of database using RapidClone"
RW-50010: Error: - script has returned an error: 1
RW-50004: Error code received when running external process. Check log file for details.
Running Database Install Driver for VIS instance
Processing DriverFile = J:\OracleEBSR12_downloads\StageR12\startCD\Disk1\rapidwiz\template\adridb.drv
Running Instantiation Drivers for J:\OracleEBSR12_downloads\StageR12\startCD\Disk1\rapidwiz\template\adridb.drv
instantiate file:
source : J:\OracleEBSR12_downloads\StageR12\startCD\Disk1\rapidwiz\template\adrun10g.cmd
dest : J:\oracle\VIS\db\tech_st\10.2.0\temp\VIS_ora-apps\adrun10g.cmd
backup : J:\oracle\VIS\db\tech_st\10.2.0\temp\VIS_ora-apps\adrun10g.cmd to J:\oracle\VIS\db\tech_st\10.2.0\appsutil\out\VIS_ora-apps\templbac\adrun10g.cmd
instantiate file:
source : J:\OracleEBSR12_downloads\StageR12\startCD\Disk1\rapidwiz\template\adrundb.cmd
dest : J:\oracle\VIS\db\tech_st\10.2.0\temp\VIS_ora-apps\adrundb.cmd
backup : J:\oracle\VIS\db\tech_st\10.2.0\temp\VIS_ora-apps\adrundb.cmd to J:\oracle\VIS\db\tech_st\10.2.0\appsutil\out\VIS_ora-apps\templbac\adrundb.cmd
Step 0 of 5
Command: J:\oracle\VIS\db\tech_st\10.2.0\temp\VIS_ora-apps\adrun10g.cmd
Processing Step 1 of 5
Step 1 of 5
Command: J:\oracle\VIS\db\tech_st\10.2.0\temp\VIS_ora-apps\adrundb.cmd
Processing Step 2 of 5
Executing: J:\oracle\VIS\db\tech_st\10.2.0\temp\VIS_ora-apps\adrundb.cmd
J:\OracleEBSR12_downloads\StageR12\startCD\Disk1\rapidwiz>REM
J:\OracleEBSR12_downloads\StageR12\startCD\Disk1\rapidwiz>REM $Header: adrundb.cmd 120.6 2006/12/21 19:50:11 marderiu noship $
</snip>
Any help on this would be appreciated.
Thanks.
Hammad.
Message was edited by:
user592768

Hussein,
I reinstalled MS VC++ again, couldn't delete those LEGACY_* registry entries though.
I thought I'd try install again before re-installing the OS. Here are the results:
I got the same error code again on the RapidInstall applet: RW-50004.
Looks like some sort of service isn't getting started or created.
However, looking at the J:\oracle\VIS\db\tech_st\10.2.0\appsutil\log\VIS_ora-apps\ApplyDBStack_XXX.log file it says:
<snip>
LSNRCTL for 32-bit Windows: Version 10.2.0.2.0 - Production on 02-SEP-2007 00:53:51
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROCVIS))
The command completed successfully
ECHO is off.
Listener VIS has already been started.
ECHO is off.
addlnctl.cmd exiting with status 0
OpenService failed
adsvdlsn.cmd exiting with status 1007
ERRORCODE = 1007 ERRORCODE_END
.end std out.
.end err out.
</snip>
and further....
<snip>
[CVM Error Report]
The following report lists errors encountered during CVM Phase
<filename> <return code where appropriate>
J:\oracle\VIS\db\tech_st\10.2.0\appsutil\bin\adgentns.pl 25600
No of scripts failed in CVM phase: 1
[AutoConfig Error Report]
The following report lists errors AutoConfig encountered during each
phase of its execution. Errors are grouped by directory and phase.
The report format is:
<filename> <phase> <return code where appropriate>
[SETUP PHASE]
AutoConfig could not successfully execute the following scripts:
Directory: J:\oracle\VIS\db\tech_st\10.2.0\appsutil\install\VIS_ora-apps
adsvdlsn.cmd INSTE8_SETUP 1007
AutoConfig is exiting with status 1
RC-50014: Fatal: Execution of AutoConfig was failed
Raised by oracle.apps.ad.clone.ApplyDBTechStack
</snip>
I also checked the NetServiceHandler.log file in the same dir and here is the trace:
<snip>
ADX Database Utility
getConnectionUsingAppsJDBCConnector() -->
APPS_JDBC_URL='null'
Trying to get connection using SID based connect descriptor
getConnection() -->
sDbHost : ora-apps
sDbDomain : spectrum-tech.com
sDbPort : 1531
sDbSid : VIS
sDbUser : APPS
Trying to connect using SID...
getConnectionUsingSID() -->
JDBC URL: jdbc:oracle:thin:@ora-apps.spectrum-tech.com:1531:VIS
Exception occurred: java.sql.SQLException: Listener refused the connection with the following error:
ORA-12518, TNS:listener could not hand off client connection
The Connection descriptor used by the client was:
ora-apps.spectrum-tech.com:1531:VIS
Trying to connect using SID as ServiceName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=ora-apps.spectrum-tech.com)(PORT=1531))(CONNECT_DATA=(SERVICE_NAME=VIS)))
Exception occurred: java.sql.SQLException: Listener refused the connection with the following error:
ORA-12518, TNS:listener could not hand off client connection
The Connection descriptor used by the client was:
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=ora-apps.spectrum-tech.com)(PORT=1531))(CONNECT_DATA=(SERVICE_NAME=VIS)))
Trying to connect using SID as ServiceName.DomainName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=ora-apps.spectrum-tech.com)(PORT=1531))(CONNECT_DATA=(SERVICE_NAME=VIS.spectrum-tech.com)))
Exception occurred: java.sql.SQLException: Listener refused the connection with the following error:
ORA-12514, TNS:listener does not currently know of service requested in connect descriptor
The Connection descriptor used by the client was:
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=ora-apps.spectrum-tech.com)(PORT=1531))(CONNECT_DATA=(SERVICE_NAME=VIS.spectrum-tech.com)))
Connection could not be obtained; returning null
</snip>
At the end it says:
<snip>
adgentns.pl exiting with status 25600
ERRORCODE = 25600 ERRORCODE_END
</snip>
I tried pinging my oracle machine ora-apps locally and it works, i.e. if I do ping ora-apps I get a response. I also tried pinging using the dns suffix that I setup based on your instructions and I get a response as well.
Also, I when I try pinging the ora-apps machine from another one on the network using ping ora-apps, I also get the same result.
However, if I use the entire domain name, i.e. ora-apps.spectrum-tech.com, I get a response from some server on Yahoo hosting, our ISP!!!! is that a problem?
Thanks.
Hammad.

Error 0000: internal error with Apply Transform Module

Hello:
I get an internal error message when attempting to use a previously saved data transform (namely missing value processing using MICE). What is strange is that using the previously saved model works if I feed the exact same data that was used for training
it but generates an internal error whenever I use a sample - even a 90% sample of the original. This is the output log:
Record Starts at UTC 04/02/2015 10:30:53:
Run the job:"/dll "Microsoft.Analytics.Modules.ApplyITransform.Dll, Version=6.0.0.0, Culture=neutral, PublicKeyToken=69c3241e6f0468ca;Microsoft.Analytics.Modules.ApplyITransform.Dll.ApplyITransformModule;ApplyITransform" /Output0 "..\..\Transformed dataset\Transformed dataset.dataset" /transform "..\..\Transformation\Transformation.itransform" /data "..\..\Dataset\Dataset.dataset" "
Starting Process 'C:\Resources\directory\870595a63cd0452da2f3767b831099d7.SingleNodeRuntimeCompute.Packages\AFx\6.2\DllModuleHost.exe' with arguments ' /dll "Microsoft.Analytics.Modules.ApplyITransform.Dll, Version=6.0.0.0, Culture=neutral, PublicKeyToken=69c3241e6f0468ca;Microsoft.Analytics.Modules.ApplyITransform.Dll.ApplyITransformModule;ApplyITransform" /Output0 "..\..\Transformed dataset\Transformed dataset.dataset" /transform "..\..\Transformation\Transformation.itransform" /data "..\..\Dataset\Dataset.dataset" '
[ModuleOutput] DllModuleHost Start: 1 : Program::Main
[ModuleOutput] DllModuleHost Start: 1 : DataLabModuleDescriptionParser::ParseModuleDescriptionString
[ModuleOutput] DllModuleHost S[ModuleOutput] DllModuleHost Start: 1 : DllModuleMethod::DllModuleMethod
[ModuleOutput] DllModuleHost S[ModuleOutput] DllModuleHost Start: 1 : DllModuleMethod::Execute
[ModuleOutput] DllModuleHost Start: 1 : DataLabModuleBinder::BindModuleMethod
[ModuleOutput] DllModuleHost Verbose: 1 : moduleMethodDescription Microsoft.Analytics.Modules.ApplyITransform.Dll, Version=6.0.0.0, Culture=neutral, PublicKeyToken=69c3241e6f0468ca;Microsoft.Analytics.Modules.ApplyITransform.Dll.ApplyITransformModule;ApplyITransform
[ModuleOutput] DllModuleHost Verbose: 1 : assemblyFullName Microsoft.Analytics.Modules.ApplyITransform.Dll, Version=6.0.0.0, Culture=neutral, PublicKeyToken=69c3241e6f0468ca
[ModuleOutput] DllModuleHost Start: 1 : DataLabModuleBinder::LoadModuleAssembly
[ModuleOutput] DllModuleHost Verbose: 1 : Trying to resolve assembly : Microsoft.Analytics.Modules.ApplyITransform.Dll, Version=6.0.0.0, Culture=neutral, PublicKeyToken=69c3241e6f0468ca
[ModuleOutput] DllModuleHost Verbose: 1 : Loaded moduleAssembly Microsoft.Analytics.Modules.ApplyITransform.Dll, Version=6.0.0.0, Culture=neutral, PublicKeyToken=69c3241e6f0468ca
[ModuleOutput] DllModuleHost S[ModuleOutput] DllModuleHost Verbose: 1 : moduleTypeName Microsoft.Analytics.Modules.ApplyITransform.Dll.ApplyITransformModule
[ModuleOutput] DllModuleHost Verbose: 1 : moduleMethodName ApplyITransform
[ModuleOutput] DllModuleHost Information: 1 : Module FriendlyName : Apply Transformation
[ModuleOutput] DllModuleHost Information: 1 : Module Release Status : Release
[ModuleOutput] DllModuleHost S[ModuleOutput] DllModuleHost Start: 1 : ParameterArgumentBinder::InitializeParameterValues
[ModuleOutput] DllModuleHost Verbose: 1 : parameterInfos count = 2
[ModuleOutput] DllModuleHost Verbose: 1 : parameterInfos[0] name = transform , type = Microsoft.Analytics.MachineLearning.ITransform`2[Microsoft.Numerics.Data.Local.DataTable,Microsoft.Numerics.Data.Local.DataTable]
[ModuleOutput] DllModuleHost Start: 1 : DotNetSerializationHandler::HandleArgumentString
[ModuleOutput] DllModuleHost S[ModuleOutput] DllModuleHost Verbose: 1 : parameterInfos[1] name = data , type = Microsoft.Numerics.Data.Local.DataTable
[ModuleOutput] DllModuleHost Start: 1 : DataTableDatasetHandler::HandleArgumentString
[ModuleOutput] DllModuleHost S[ModuleOutput] DllModuleHost S[ModuleOutput] DllModuleHost Verbose: 1 : Begin invoking method ApplyITransform ...
[ModuleOutput] InputDataStructure
[ModuleOutput]
[ModuleOutput] {
[ModuleOutput] "InputName":Dataset
[ModuleOutput] "Rows":385338
[ModuleOutput] "Cols":105
[ModuleOutput] "ColumnTypes":System.Nullable`1[System.Double],99,System.Nullable`1[System.Int32],5,System.String,1
[ModuleOutput] }
[ModuleOutput] DllModuleHost S[ModuleOutput] DllModuleHost Error: 1 : Program::Main encountered fatal exception: Microsoft.Analytics.Exceptions.ErrorMapping+ModuleException: Error 0000: Internal error ---> System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> System.ArgumentException: Source array was not long enough. Check srcIndex and length, and the array's lower bounds.
Module finished after a runtime of 00:00:27.6131405 with exit code -2
Module failed due to negative exit code of -2
Record Ends at UTC 04/02/2015 10:31:38.
Experiment URL:
https://studio.azureml.net/Home/ViewWorkspace/ffac4490b5e448fa8778ceadc74a0b97?#Workspaces/Experiments/Experiment/ffac4490b5e448fa8778ceadc74a0b97.f-id.0c2caa16ad4b46b08449bcfaf4a71e57/ViewExperiment
Thanks for your help

It's pretty clear no-one at Microsoft is interested in answering this on this forum. With a paid subscription plan would I be able to get a response for these types of incidents/follow up questions? You know - so I can stop throwing money away
running experiments with modules that haven't been fixed in almost a month in hope that magically they will start to work some day...

Error applying transforms during PSE 11 install

Similar Messages

Maybe you are looking for