Error ArrayIndexOutOfBoundsException while performing VO substitution.

Hi,
We are getting ArrayIndexOutOfBoundsException while performing substitution against one standard oracle VO (oracle.apps.csf.portal.task.server.MaterialInstallEOVO).
Following are the steps which we have performed:
1. Created a new XXVO by Extending standard oracle VO (oracle.apps.csf.portal.task.server.MaterialInstallEOVO).
2. Added 2 additional transient attributes to this new XXVO.
3. define substitution and upload jpx (having substitution definition) to mobile server.
4. Bounce OC4J and Apache Server.
Results:
-- Successfully able to access new attributes and old attributes with no issues.
Issue:
Issue facing while copying this new XXVO, means while creating duplicate install line. User can select one record and can create duplicate record by clicking a "duplicate button". But Its throwing exception ArrayIndexOutOfBoundsException.
Note:If We remove our additional transient attributes from new XXVO then duplicate functionality works fine. A new records get successfully created as per the selected record.
More information:
There are 2 standard VOs (MaterialInstallEOVO and DebriefHeadersEOVO) and one standard View Link is defined as CsfMaterialVL using these 2 standard VOs. We need to substitute MaterialInstallEOVO by our new XXMaterialInstallEOVO.
Hope I am able to explain things but if any question please let me know.
Any Ideas or suggestion will be great help.
Thank you!!
Thanks n Regards
Ravinder

Hi elcaro
Would you pls share the EBS version you are working on .As you said that you are just trying to check the substitution whether it works or not ,so it means there should be no new view attributes in extended VO ,so transient attribute (PackingSlip) must not be included in extended VO, I am not sure that this may be a cause of error but better you remove this and test again ,you can remove this view attribute using shuttle window of attribute list (double clik on VO go to attributes there u can use movement icons remove the PackingSlip view attribute ),but i would suggest that please extend the VO once again from scratch one more time.
thanks
Pratap

Similar Messages

"An unspecified error occurred while performing a conform action on the following file:"

Has anyone else gotten this error in any of their projects? I've searched around Adobe support pages and elsewhere on the internet, but have found nothing.
It comes up in the events window and I can't even read what file it's talking about because it's on the next line, but the error message only shows one line and I haven't figured out a way to expand it.
I'm not even sure if it's causing any problems, or not (the project seems to work ok). This message shows up twice, as a red circle with an 'X' in it, but I also get the following message numerous times referring to a large amount of my .avi files:
"File importer detected an inconsistency in the file structure of filename.avi. Reading and writing this file's metadata (XMP) has been disabled."
That message shows up as a yellow triangle with an '!' in it. Since I haven't been able to turn anything up about these messages, I figured I'd ask here and see if anyone knew what was going on, how to fix the problem or if I should even worry about them.
Thanks.

I am having this problem now when i use dynamic link from Premiere to after effects. I copy the footage from premiere then paste into after effects, i add alittle text maybe some light rays etc save it then go back to premiere. Then i get this message "An unspecified error occurred while performing a conform action on the following file C:\Caches\Media Cache Files\text comp 1 48000.cfa." does anyone have any idea as to what this is? i have had a few problems using the dynamic link from premiere to after effects problems such as Premiere freezing, not playing the after effects comps back in real time, crashes etc. Its as if the 2 programs dont like the dynamic link.
Im running Master Collection CS5 & CS 5.5 on running on a 24gb ram, Intel Core i7 950 @3.07GHz PC with a NVIDIA GeForce GTX470 graphics card.

PRE10 "Unspecified error occurred while performing a conform action on the following file:..."

I really need some help!
I am making a short video on premiere elements 10 and I seem to get this conforming error everytime I open the project and I cannot save it either!!
"Unspecified error occured while performing a conform action on the following file:
File0002.AVI 48000.CFA"
This happens everytime I open premiere elements 10 to lots (or all) of my video clips and I can't find any help in the adobe forums or anywhere else online!
Also, I want to save this video as an AVI file, but when I try to export it, it says it has finished quite quickly and has not even added anything to click on or when it does, it does not play. Sometimes it says it has finished then comes up with: "Error compiling movie. Unknown error". one of these happen everytime that I try to save it.
Lots (or all) of my avi files come up as this same conforming error when I load the project and I have no clue as to what to do!...
It also crashes nearly everytime after these compiling errors!
My computer is running windows 7 ultimate OS
Please help!
Please...!

Operating System
System Model
Windows 7 Ultimate (build 7100)
Gigabyte Technology Co., Ltd. M61PME-S2P
Enclosure Type: Desktop
Processor
Main Circuit Board
2.80 gigahertz AMD Athlon X2 240
256 kilobyte primary memory cache
1024 kilobyte secondary memory cache
64-bit ready
Multi-core (2 total)
Not hyper-threaded
Board: Gigabyte Technology Co., Ltd. M61PME-S2P
Bus Clock: 200 megahertz
BIOS: Award Software International, Inc. F2 12/30/2008
Drives
Memory Modules
320.07 Gigabytes Usable Hard Drive Capacity
125.82 Gigabytes Hard Drive Free Space
TSSTcorp CDDVDW SE-S084C USB Device [Optical drive]
SAMSUNG HD321HJ SCSI Disk Device (320.07 GB) -- drive 0, s/n S13RJ90SB04688, SMART Status: Healthy
1984 Megabytes Usable Installed Memory
Slot 'A0' has 2048 MB
Slot 'A1' is Empty
Local Drive Volumes
c: (NTFS on drive 0) *
319.97 GB
125.76 GB free
d: (NTFS on drive 0)
105 MB
65 MB free
* Operating System is installed on c:
The media files are avi and are in my videos folder (videos-windows 7)

Error occured while performing nmConnect : Cannot connect to Node Manager.

Hi There,
I am trying to connect to my node manager via WLST, however when I try to do so I get the following exception:
WLSTException: Error occured while performing nmConnect : Cannot connect to Node Manager. : Read channel closed
I have searched Google for the reason behind this exception, but I couldnt find anything that explains why I am getting it.
Could someone help me out? All I want to do is connect to the node manager and then kill one of the nodes.
I should point out that the AdminServer and the node are the same machine.

The nodemanager will not accept SSL connections, I checked the config on WL itself.
I can confirm that it is also in nodemanager.domains
I have restarted the service and also bounced the box, but this hasnt helped. I get the following when running this command:
<27-May-2013 14:08:43 o'clock CEST> <Info> <Security> <BEA-090905> <Disabling CryptoJ JCE Provider self-integrity check for better startup performance. To enable this check, specify -Dweblogic.security.allowCryptoJDefaultJCEVerification=true>
<27-May-2013 14:08:43 o'clock CEST> <Info> <Security> <BEA-090906> <Changing the default Random Number Generator in RSA CryptoJ from ECDRBG to FIPS186PRNG. To disable this change, specify -Dweblogic.security.allowCryptoJDefaultPRNG=true>
<27-May-2013 14:08:44 o'clock CEST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=Entrust Root Certification Authority - G2,OU=(c) 2009 Entrust\, Inc. - for authorized use only,OU=See www.entrust.net/legal-terms,O=Entrust\, Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<27-May-2013 14:08:44 o'clock CEST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=thawte Primary Root CA - G3,OU=(c) 2008 thawte\, Inc. - For authorized use only,OU=Certification Services Division,O=thawte\, Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<27-May-2013 14:08:44 o'clock CEST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=T-TeleSec GlobalRoot Class 3,OU=T-Systems Trust Center,O=T-Systems Enterprise Services GmbH,C=DE". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<27-May-2013 14:08:44 o'clock CEST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=T-TeleSec GlobalRoot Class 2,OU=T-Systems Trust Center,O=T-Systems Enterprise Services GmbH,C=DE". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<27-May-2013 14:08:44 o'clock CEST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=GlobalSign,O=GlobalSign,OU=GlobalSign Root CA - R3". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<27-May-2013 14:08:44 o'clock CEST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "OU=Security Communication RootCA2,O=SECOM Trust Systems CO.\,LTD.,C=JP". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<27-May-2013 14:08:44 o'clock CEST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=VeriSign Universal Root Certification Authority,OU=(c) 2008 VeriSign\, Inc. - For authorized use only,OU=VeriSign Trust Network,O=VeriSign\, Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<27-May-2013 14:08:44 o'clock CEST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=KEYNECTIS ROOT CA,OU=ROOT,O=KEYNECTIS,C=FR". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<27-May-2013 14:08:44 o'clock CEST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=GeoTrust Primary Certification Authority - G3,OU=(c) 2008 GeoTrust Inc. - For authorized use only,O=GeoTrust Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
Should it be going through all of this if I am trying to connect with plain text?

An unknown error occurred while performing a sync operation. Please check your account and network settings, then try again.

hi,
i cannot perform any syncs / back ups (including mobile me) on my imac other than old ipods.
i recieve this message
"An unknown error occurred while performing a sync operation. Please check your account and network settings, then try again".

hi,
i cannot perform any syncs / back ups (including mobile me) on my imac other than old ipods.
i recieve this message
"An unknown error occurred while performing a sync operation. Please check your account and network settings, then try again".

Premiere CS6 + Yosemite + R3D "An unspecified error occurred while performing a conform action"

Hi there!
I seem to have an issue with Premiere Pro CS6 and Yosemite:
I have a Premiere project made in Premiere 6.0.5 composed entirely of R3D media. While running Mavericks 10.9.5, everything seemed to work just fine. I could play the timeline with or without rendering and I didn't have any error messages to speak of. After doing some research and finding out that CS6 works fine in Yosemite 10.10, I decided to take the plunge and upgrade last night. Today, I opened up the same Premiere project and I got the infamous "An unspecified error occurred while performing a conform action" error message for seemingly every R3D file in the project, and I could not play the timeline without rendering every frame.
I went back to the install disc and restored Premiere to the original 6.0.0, but that didn't help. So while in Yosemite, I updated Premiere back to 6.0.5 and found myself (unsurprisingly) with the same issue. I have a backup of Mavericks 10.9.5 that I can easily revert to, but I'd like to figure out what's going on! Yosemite is the only variable that changed, but I want to figure out what to do to allow Premiere Pro CS6 + Yosemite + R3D files to all play nicely together.
Please let me know if I can provide any more information or if there's anything I can do to get this up and running again.
Thanks!
Andrew

Update from Adobe's Tim Kurkoski (on another thread):
I have verified this problem. After Effects CS6, Premiere Pro CS6, and Adobe Media Encoder CS6 experience problems with RED .r3d files on Mac OS X 10.10 Yosemite.
More specifically, the ImporterREDServer process used by these applications is failing to launch or crashing. You may be able to import and use some .r3d files for a short time, but once the ImporterREDServer process crashes, frames from imported files won't be returned, and importing new files will result in error messages.
We are investigating the problem.
This problem does not occur in the CC or CC 2014 versions of After Effects, Premiere Pro, or Adobe Media Encoder on Mac OS X 10.10 Yosemite. If you do not have access to these versions, my suggestion for workarounds are to transcode the .r3d files to a different format (ex., QuickTime with ProRes or other high quality intermediate codec) or roll back to Mac OS X 10.9.
Fingers crossed for an update!

The following error occurred while performing a repository action. Error - [PCSF_10007] Cannot connect to repository [dev_repo] because \n[[REP_61082] AdminConsole's code page (UTF-8 encoding of Unicode) is not one-way compatible to repository dev_repo's

Can some one help me out here ?

Hello Experts, Am facing the below error in console page.Can someone help out here ? The following error occurred while performing a repository action. Error - [PCSF_10007] Cannot connect to repository [dev_repo] because \n[[REP_61082] AdminConsole's code page (UTF-8 encoding of Unicode) is not one-way compatible to repository dev_repo's code page (MS Windows Latin 1 (ANSI), superset of Latin1). Failed to connect to repository service [dev_repo].]. Below my environment variables in .bash_profile LANG=en_US.utf8; export LANGLC_ALL=en_US.utf8; export LC_ALLINFA_CODEPAGENAME=UTF-8; export INFA_CODEPAGENAME Thanks,Ahmed.

Error "CONVT_NO_NUMBER" while performing user measurement with USMM

Hi,
While running user measurement with USMM I am getting following run
time error.
To be specific - After preselections in USMM->system measurement->while
checking Green Check mark this error is screaming up.
Ae per Note - 1230640 :- You call transaction USMM and want to cancel
the user measurement using the cancel button (red 'X') on the dialog
box of the user measurement. However, the measurement continues and is
completed as if you had chosen the ok button (green check mark).
Above note is applied if the problem comes if we check red button
rather than green check mark.
Please suggest us the best way to procees.
ST22 details:-
Runtime Errors CONVT_NO_NUMBER
Exception CX_SY_CONVERSION_NO_NUMBER
Date and Time 09/16/2008 07:42:32
Short text
Unable to interpret " 1,410 " as a number.
What happened?
Error in the ABAP Application Program
The current ABAP program "RSUVM001" had to be terminated because
it has
come across a statement that unfortunately cannot be executed.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
An exception occurred that is explained in detail below.
The exception, which is assigned to
class 'CX_SY_CONVERSION_NO_NUMBER', was not
caught and
therefore caused a runtime error.
How to correct the error
Whole numbers are represented in ABAP as a sequence of numbers,
possibly
with an algebraic sign.
The following are the possibilities for the representation of
floating
point numbers:
[mantissa]E[algebraic sign][exponent]
[whole number part].[fraction part]
For example, -12E+34, +12E-34, 12E34, 12.34
If the error occurred in your own ABAP program or in an SAP
program you modified, try to remove the error.
If the error occures in a non-modified SAP program, you may be able
to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the
following
keywords:
"CONVT_NO_NUMBER" "CX_SY_CONVERSION_NO_NUMBER"
"RSUVM001" or "RSUVM001"
"START-OF-SELECTION"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
Information on where terminated
Termination occurred in the ABAP program "RSUVM001" - in "START-OF-
SELECTION".
The main program was "RSUVM001 ".
In the source code you have the termination point in line 96
of the (Include) program "RSUVM001".
85 * Analyze the user records.
86 CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
87 EXPORTING
88 text = 'Die Benutzerstammsätze werden analysiert.'(002).
89 * PERFORM analyze_user_records.
90
91 CALL FUNCTION 'SLIM_USER_MEASUREMENET'
92 CHANGING
93 SLIM_TUREP = LT_TUREP.
94 .
95 LOOP AT LT_TUREP INTO LS_TUREP .
>>>>> MOVE-CORRESPONDING LS_TUREP TO ITUREP.
97 APPEND ITUREP.
98 ENDLOOP.
99
100 * Submit Application measurements as batch jobs.
101 * Save additional data about this analysis in the DB.
102 * we need meas-no ,v-date at the batch
any ideas?

Hi Srikanth,
The below Notes helps you to solve the issue.
Please review the below Notes.
Note 1117010 - Runtime error CONVT_NO_NUMBER in RSUVM001
Note 1115924 - USMM composite SAP Note: Problems after importimg new SPs
Thanks & Regards,
Pradeep Srigiri

Error message "An Error occurred while performing this operation" while opening a document.

Hi Adobe..
We are using Live cycle ES and ES2 for applying security on the document..
With latest Mozilla and Chrome versions and with Adobe reader XI, if we try opening a document, we happens to see the below error message..
Please advise us in getting this issue resolved...
Thanks.

To use XFA-based PDF forms on Firefox and Chrome, perform the following steps to configure Firefox and Chrome to open PDFs using Adobe Reader or Adobe Acrobat.
Firefox configuration:
1) Tools -> Options
2) Click Applications
3) In the Applications tab, type PDF in the search field.
4) For Portable Document Format (PDF) content type in the search result, select Use Adobe Acrobat (in Firefox) from the
Action drop-down list
Click OK and restart firefox.
Chrome configuration:
1) In Chrome, go to chrome://plugins/.
2) Click Disable under Chrome PDF Viewer, and click Enable under Adobe PDF Plug-In.
probably this would resolve the issue.
Thanks
Shivam

Recieved error messages while performing recovery to factory state from the hard drive

HP Touchsmart tx2-1165ea, product no:NM515EA,microsoft vista SP1 operating system.
I keep recieving error messages during recovery to factory state from hard drive and perfoming a recovery from my recovery disc hangs on disc2. Therefore I am unable to update vista sp1 to vista sp2 the reson is: error SMI primitive installer failed (ox8007371c).
Reason for recovery ? performed a clean upgrade to windows 7(as rcommended) but I dont like that operating system
Request: kindly rectify my factory shipped recovery partion errors.

Thank you for the clarification.
Typically, service packs have some requirements before they are listed in Windows update. It's really the build ID that determines what updates are listed through Windows Updates. Various Windows Updates will change the build ID and once that prerequisite is reached, service should be listed. I know that service pack 2 does not show in Windows Update until several updates and restarts later on my Vista SP1 system at home.
Have you tried running Windows Update multiple times making sure to install the important updates or did you go straight to trying to manually install the service pack?
1. recovery disc is on the hard drive shipped in the computer from the factory.
I may be reading too much into this, but does this mean the recovery was performed by pressing F11 during boot or by using disks created using the hard drive's recovery partition prior to upgrading to it to Windows 7?
Also, how many times did you attempt the recovery from scratch? Many users have stated simply doing the recovery again took care of the issue and this seemed to be independent of manufacturer.
You can try the registry edit listed here, but registry edits are a little risky and do so at your own risk. However, try the first solution in the registry edit post.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

What's causing VDP to fail installation? VDP: Configuring Install Storage vSphere Data Protection 5.5 An error occurred while performing this task.

I have been pulling my hair to figure out what's going on here. I can deploy the VDP ovf appliance fine, it's allowing setup to finish so I can start using it. It fails at the final stretch, during the Storage Configuration. Here's the errors event log:
XXX
com.vmware.vdp2.config.failed.config.os.data.di-
sk.formatOnVm not found XXX
XXX com.vmware.vdp2.config.failed.config.os.data.disk.category not found XXX
4/9/2014 12:05:05 PM
VDP: Configuring Install Storage
vSphere Data Protection 5.5
VDP: Finalizing storage configuration.
error
4/9/2014 12:05:06 PM
VDP: Configuring Install Storage
vSphere Data Protection 5.5
VDP: Completed finalizing storage configuration.
error
4/9/2014 12:05:07 PM
VDP: Configuring Install Storage
vSphere Data Protection 5.5
This is all I get, and I have to start all over again only to run into the same error. I have a NFS share mounted to the HOST to store the VDP hard drive images. Help, please! ~_~
Regards,
Mark A.

Just found this from a Google search. I'm about to try it!
Deployment of a VMware VDP appliance fails on NFS shares on a Windows Storage Server 2008 R2 or Windows Storage Server 2…

When trying to apply a Policy, Get Error: An error occurred while performing this operation. contact an administor if this problem continues

I have just installed ES4 LC with only the Rights Management Module. I have everything setup and can access the Policy server from Acrobat pro XI and can see and create policies.
however when trying to apply any policy to my PDF I get the Error in the Subject line.
for all intents and purposes, the setup and configuration looks fine but I seem to be unable to get past the very last step and actually use the policies.
please can anyone help?

Try this:
Fix for Software Update
See Troubleshooting Automatic Software Update in Mac OS X.
Delete the following files:
/Library/Preferences/com.apple.SoftwareUpdate.plist
/Home/Library/Preferences/ByHost/com.apple.SoftwareUpdate.xxx.plist where "xxx" is a number.
/Home/Library/Caches/com.apple.SoftwareUpdate/ (delete entire folder)

Error occured while performing the operation : Cannot open Service Control Manager on computer FOO. This operation might require other privileges.

My company is splitting in two, so we're migrating half of our systems and servers to a new domain. I have an application that uses AppFabric. We have 3 Windows servers running AppFabric, each talking to a SQL server for the AppFabric cluster service.
On the initial domain, everything was working fine. AppFabric service is running under a service account we'll call DOMAIN1\svc_acct that is the dbo on the AppFabric database. The service account is a local admin on all the boxes. Permissions are all working
fine.
I've migrating the servers to the new domain and it won't work anymore.
Now I'm using DOMAIN2\svc_acct that is the dbo on the database again. The exact same app servers have moved to the new domain and once again that service account is a local admin on all the boxes. But AppFabric won't work. I migrated the boxes back to the initial
domain and it worked again. I migrated it back to the new domain, and it won't work.
I'm under a time crunch to get this working for the company split. Any help would be greatly appreciated!
Thanks!

Lowering UAC is not always the best approach.
It sounds like you could run the installation elevated by right clicking setup and selecting Run as administrator.
Jason Warren
habaneroconsulting.com/Insights
@jaspnwarren

Error FCO-00011 while performing System Import for PI 7.0

Hi All,
Error occured while performing system import for PI 7.0.
Error occured at phase 11 of 34 (Create database instance)
As per the log sapinst.log
FCO-00011 The step sdb_init_instance_type with step key |NW_Doublestack_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|9|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_ADA_DB|ind|ind|ind|ind|6|0|SdbPreInstanceDialogs|ind|ind|ind|ind|3|0|SdbInstanceDialogs|ind|ind|ind|ind|1|0|SDB_INSTANCE_CREATE|ind|ind|ind|ind|0|0|sdb_init_instance_type was executed with status ERROR .
As per the log XCMDOUT.log
> Subprocess starts at 20090420093658
Execute Command : /sapdb/programs/bin/dbmcli -n lgsbie -d EXI -u CONTROL,********
Start subprocess as user with uid: root
Execute Session Command : param_startsession
> Subprocess stops at 20090420093658
Error! Connection failed to node (hostname) for database (SID):
database not found
Please let me know your valuable inputs.
Regards
Shiva.

Details of Error :
This is the Test System.
When trying to do system copy by extracting the export from production, selected the option for ABAP+JAVA and moving further selected Homogenous System copy (backup n recovery), at phase 10 - 34 it has removed database instance n in the next phase while creating the database it got struck.
Error displayed even go ahead selecting New installation :
Subprocess starts at 20090422134100
Execute Command : /sapdb/programs/bin/dbmcli -n hostname -d SID -u CONTROL,******** db_online
Start subprocess as user with uid: root
> Subprocess stops at 20090422134133
ERR
-24988,ERR_SQL: SQL error
-902,I/O error
3,Database state: OFFLINE
6,Internal errorcode, Errorcode 9050 "disk_not_accessible"
20017,RestartFilesystem failed with 'I/O error'
Please provide me the best solution at the earliest which will be really aprreciated
Regards
Shiva

ORA-12705 Error Message while trying to connect to the DB

A colleague of mine has been trying to connect to the DB through PL/SQL Developer. The error message returned is :
ORA-12705: invalid or unknown NLS parameter value specified
Checked the registry for NLS_LANG which is set to NA. I did that because the ORA message references the NLS_LANG parameter. However, I doubt that is the problem. Went about to create a new TNS Name entry through Oracle NET Manager and get the same Error Message while performing the TEST function.
Any clues ? I am clueless at this point.

This can occur with any NLS_ environment variable of registry value.
Your assertion ' the ORA message references the NLS_LANG parameter' is incorrect.
You can set NLS_TERRITORY, NLS_DATE_FORMAT etc, etc, etc.
The order of precedence is environment variable, registry, Oracle provided default.
To find out what is going on set every NLS related environment variable to the empty string.
In sqlplus
select * from v$nls_valid_values
will show you what can be set,
This error will also occur when you installed the software with English as the only language.
SQL developer doesn't use tnsnames.ora
The new tnsname entry has nothing to do with it.
You have an incorrect environment variable or registry value somewhere
(in HKLM\software\oracle)
Sybrand Bakker
Senior Oracle DBA

Error ArrayIndexOutOfBoundsException while performing VO substitution.

Similar Messages

Maybe you are looking for