Error AS ABAP initial load

At my initial load AS ABAP, the following error showed up:
putNextEntry failed storingS_A.SHOW
Exception from Add operation:com.sap.idm.ic.ToPassException: ToIDStore.addEntry failed storing entry 'S_A.SHOW'. IDStore returned error message: " No such attribute:Attribute: ACCOUNTM23_ME5" when storing attribute 'ACCOUNTM23_ME5=S_A.SHOW'
Exception from Modify operation:com.sap.idm.ic.ToPassException: ToIDStore.modEntry failed updating entry 'S_A.SHOW'. IDStore returned error message: "Entry does not exist" when fetching entry
This error message affects all users. Where can I add the missing attributes?
Thanks for your help!!!

Gerhard,
Could you please share the solution?
Thanks.

Similar Messages

Connection Refused Error while running AS ABAP Initial Load

All,
I've never connected SAP NW IdM to an actual SAP system before, and I feel like I'm missing some obvious step of configuration, but I can't figure out what.
We are in the process of trying provision user accounts to our SAP ABAP systems. My first step was to try to read all of the existing accounts from the ABAP system:
Our Basis team created me a Communication user with the proper authorizations (I ensured that the authorizations included in SAP_BC_SEC_IDM_COMMUNICATION)
I created a repository using the SAP NewWeaver AS ABAP (Specific Application Server) Repository Template (No CUA, No SNC) using that user's credentials
I then used the Job Wizard and used the job template AS ABAP - Initial Load, specifying my repository above.
When I run the job I get the following:
Initializing SAP connection with parameters:
com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: Connect to message server failed Connect_PM MSHOST=<IPADDRESS>, R3NAME=<SID>, GROUP=PUBLIC LOCATION CPIC (TCP/IP) on local host ERROR partner not reached (host <IPADDRESS>, service sapms<SID>) TIME Wed Jun 01 13:54:36 201 RELEASE 640 COMPONENT NI (network interface) VERSION 37 RC -10 MODULE nixxi_r.cpp LINE 8840 DETAIL NiPConnect2 SYSTEM CALL SiPeekPendConn ERRNO 10061 ERRNO TEXT WSAECONNREFUSED: Connection refused COUNTER 1
Error Init failed
I'm running SAP NW IdM 7.1 SP5 on Windows Server 2003 with MSSQL 2005. The ABAP server is on a UNIX box with an Oracle 10.2 dB.
Is there additional configuration that needs to take place on the ABAP side to accept the connection?
I've tried to find documentation on this, but have been unsuccessful. If someone could point me to the correct documents, or at least point me in the right direction for troubleshooting, it would be greatly appreciated.

Ankur,
Looks like the endpoint URL of the webservice is not updated and still pointing to the localhost. Try changing it to http://<ip_addres_of_your_server>:7101..... and see if it works fine then.
-Arun

Error when we are running the job "AS ABAP - Initial Load" for a ABAP Syste

Hi,
We are getting the below error when we are running the job "AS ABAP - Initial Load" for a ABAP System.
Pls note that we have maintained the below entry types to the Identieny Store & we are still getting the error.
Request you to help me
MX_TITLE_SUPPLEMENT
MX_SALUTATION
MX_NAME_PREFIX
MX_ACADEMIC_TITLE
Error----
runFunctionsInString($FUNCTION.sap_getHelpValKey(MX_ACADEMIC_TITLE!!)$$) got exception
org.mozilla.javascript.EvaluatorException: uSelect(select ValKey from dbo.mxi_attrvaluehelp where ValId = 'MX_ACADEMIC_TITLE' AND ValText = '') got exception java.sql.SQLException: ORA-00942: table or view does not exist
Error runFunctionsInString($FUNCTION.sap_getHelpValKey(MX_ACADEMIC_TITLE!!)$$) got exception
org.mozilla.javascript.EvaluatorException: uSelect(select ValKey from dbo.mxi_attrvaluehelp where ValId = 'MX_ACADEMIC_TITLE' AND ValText = '') got exception java.sql.SQLException: ORA-00942: table or view does not exist
Error runFunctionsInString($FUNCTION.sap_getHelpValKey(MX_NAME_PREFIX!!)$$) got exception
org.mozilla.javascript.EvaluatorException: uSelect(select ValKey from dbo.mxi_attrvaluehelp where ValId = 'MX_NAME_PREFIX' AND ValText = '') got exception java.sql.SQLException: ORA-00942: table or view does not exist
Error runFunctionsInString($FUNCTION.sap_getHelpValKey(MX_NAME_PREFIX!!)$$) got exception
org.mozilla.javascript.EvaluatorException: uSelect(select ValKey from dbo.mxi_attrvaluehelp where ValId = 'MX_NAME_PREFIX' AND ValText = '') got exception java.sql.SQLException: ORA-00942: table or view does not exist
Error runFunctionsInString($FUNCTION.sap_getHelpValKey(MX_SALUTATION!!Mr.!!EN)$$) got exception
org.mozilla.javascript.EvaluatorException: uSelect(select ValKey from dbo.mxi_attrvaluehelp where ValId = 'MX_SALUTATION' AND ValText = 'Mr.' AND ValLocale = 'EN') got exception java.sql.SQLException: ORA-00942: table or view does not exist
Error runFunctionsInString($FUNCTION.sap_getHelpValKey(MX_TITLE_SUPPLEMENT!!)$$) got exception
org.mozilla.javascript.EvaluatorException: uSelect(select ValKey from dbo.mxi_attrvaluehelp where ValId = 'MX_TITLE_SUPPLEMENT' AND ValText = '') got exception java.sql.SQLException: ORA-00942: table or view does not exist
Error runFunctionsInString($FUNCTION.sap_getHelpValKey(MX_ACADEMIC_TITLE!!)$$) got exception
org.mozilla.javascript.EvaluatorException: uSelect(select ValKey from dbo.mxi_attrvaluehelp where ValId = 'MX_ACADEMIC_TITLE' AND ValText = '') got exception java.sql.SQLException: ORA-00942: table or view does not exist
Error runFunctionsInString($FUNCTION.sap_getHelpValKey(MX_ACADEMIC_TITLE!!)$$) got exception
org.mozilla.javascript.EvaluatorException: uSelect(select ValKey from dbo.mxi_attrvaluehelp where ValId = 'MX_ACADEMIC_TITLE' AND ValText = '') got exception java.sql.SQLException: ORA-00942: table or view does not exist
Error runFunctionsInString($FUNCTION.sap_getHelpValKey(MX_NAME_PREFIX!!)$$) got exception
org.mozilla.javascript.EvaluatorException: uSelect(select ValKey from dbo.mxi_attrvaluehelp where ValId = 'MX_NAME_PREFIX' AND ValText = '') got exception java.sql.SQLException: ORA-00942: table or view does not exist
Error runFunctionsInString($FUNCTION.sap_getHelpValKey(MX_NAME_PREFIX!!)$$) got exception
org.mozilla.javascript.EvaluatorException: uSelect(select ValKey from dbo.mxi_attrvaluehelp where ValId = 'MX_NAME_PREFIX' AND ValText = '') got exception java.sql.SQLException: ORA-00942: table or view does not exist
Error runFunctionsInString($FUNCTION.sap_getHelpValKey(MX_SALUTATION!!Mr.!!EN)$$) got exception
org.mozilla.javascript.EvaluatorException: uSelect(select ValKey from dbo.mxi_attrvaluehelp where ValId = 'MX_SALUTATION' AND ValText = 'Mr.' AND ValLocale = 'EN') got exception java.sql.SQLException: ORA-00942: table or view does not exist
Error runFunctionsInString($FUNCTION.sap_getHelpValKey(MX_TITLE_SUPPLEMENT!!)$$) got exception
org.mozilla.javascript.EvaluatorException: uSelect(select ValKey from dbo.mxi_attrvaluehelp where ValId = 'MX_TITLE_SUPPLEMENT' AND ValText = '') got exception java.sql.SQLException: ORA-00942: table or view does not exist
Error putNextEntry failed storingMANJUHB
Exception from Add operation:com.sap.idm.ic.ToPassException: ToIDStore.addEntry failed storing entry 'MANJUHB'. IDStore returned error message: " Value not legal for this attribute:Attribute: MX_ACADEMIC_TITLE_2" when storing attribute 'MX_ACADEMIC_TITLE_2=$FUNCTION.sap_getHelpValKey(MX_ACADEMIC_TITLE!!)$$'
Exception from Modify operation:com.sap.idm.ic.ToPassException: ToIDStore.modEntry failed updating entry 'MANJUHB'. IDStore returned error message: "Entry does not exist" when fetching entry

The Probelm was resolved after editing the Script..... "sap_getHelpValKey.js"

Error in ABAP inital load

Dear Expert,
Find the below error while executing the job from identity center "ABAP INITIAL LOAD",
lang.ExceptionInInitializerError: JCO.classInitialize(): Could not load middleware layer 'com.sap.mw.jco.rfc.MiddlewareRFC'
JCO.nativeInit(): Could not initialize dynamic link library sapjcorfc. Found version "2.1.9 (2010-01-28)" but required version "2.1.8 (2006-12-11)".
JCO 2.1.8 is no longer supported and it is not available for download from SMP.
The second problem, I face is "Workflow" tab in the identity center, after applying SP4 also could not see the tab.
Any lead on this highly appreciated.
Thanks
Ahamed

Hi,
Sorry for hacking the thread .. Actually we are also on same boat, We are implementing SAP Netweaver IDM 7.1 SP5 and facing similar issue with ABAP Initial load .
I had given a broad search in Google and even in SMP but not able to get the correct version(2.1.8).
May be you can help .
Regards,

Filter on SAP ABAP Initial Loads

Hi all,
I'm trying to put a filter on the pass "ReadABAPuser" of an ABAP Initial Load. My SAP ABAP System has over 10000 users and I need only part of them.
I tried so to add "FILTER" entry (as on ReadABAProle for example) on Source tab of the pass "ReadABAPuser" with value "A*".
But seems the pass does not make attention of this FILTER and still request the full user list.
Do you have met this issue ?
Thanks for your help,
Benjamin

Hi Benjamin,
well, I've never worked with the pass attribute FILTER for the pass type "FromSAP". Therefore, I'm not sure about the following - but maybe it's a starting point for further investigation...
I believe that it works differently for different data types:
Roles: simple filter value which filters for the role name (you can use *)
Roles, if you connect to a CUA central system: not supported
Users: it seems to work with a multivalue name=value syntax.
Conclusion: I guess it is easier to filter users in the source tab of the ToPass "WriteABAPUsers".
Kind regards
Frank Buchholz

Regarding ABAP initial load errors

hi experts
I have below errors left while doing Initial load for AS ABAP as follows
Error type 1:
Error :runFunctionsInString($FUNCTION.sap_encryptPassword()$$) got exception - Exception:org.mozilla.javascript.JavaScriptException: java.lang.UnsupportedOperationException: java.lang.ExceptionInInitializerError
I referred page 37 in System landscape configuration guide. but could not understand what and where password has to be set.
Could you please suggest me how to solve this two problem.
Also i would like to know where the Users, roles,profiles will be written in Identity store.
regards

hi guys
Regardless of this error, i got the users/profiles/roles written in Identity center, i am able to see in monitoring webpage.
But how to solve this error is my concern...appreciate if you can give me some ideas
regards

Filter condition in ABAP Initial Load Job

Hi,
   The ECC Initial Load JOb for IDM has been failing continuously because of 'Out of Memory' Exception
Error Description - Unhandled Error in DSERuntime - Exception:java.lang.OutOfMemoryError
   All the FROM PASSES except the "ReadAbapUsers" pass has been running successfully. We believe this could be because of the huge number of Users and User-Role Assignments(2,61,000) present in ECC System.
   Hence we thought of breaking down this process(ReadAbapUsers) into smaller chunks.i.e., fetch all the users with loginuid starting with 1; then 2; then 3 and so on... But we are not sure of the way to implement this. Please suggest an alternative.
Regrads,
Joel

Hi, I dont know if you have resolved this already or not.. but have you considered increasing the heap size ?
-->
Reading stuff from an ABAP system can return a lot entries. The
roles/entries are returned in one big lump of data, and the runtime needs to
have enough space on the heap for this.
Solution
The maximum heap size can be set in the dispatcher prop file.
Locate the the correct dispatcher prop file.
This file is a java properties file. It will be called
"Dispatcher_Service_<dispatchername>.prop" i.e. if the dispatcher name
is "test", the file name will be "Dispatcher_Service_test.prop"
Locate the section
    additional Java options
Set the maximum heap size to the desired size.
i.e To increase the maximum heap size to 512 Mb, set
JAVAOPTIONS=-Xmx512M
You can set more than one java option here, but if you do so, you also
have to set
MXDISPATCHER_EXECSTRING=1
Also note that increasing the heap size has a performance impact. We
therefore do not recommend doing this for the main dispatchers. Instead,
create a separate dispatcher for running large jobs, and do this change
only for this dispatcher.
See SAP Note 1347301

Error in DNL_CUST_PROD1 Initial Load

While attempting to carry out the initial load for object (DNL_CUST_PROD1) from R/3 to CRM an inbound queue is generated with status SYSFAIL containing the following error message:
It is not posible to import material type to hierarchy ZBP_CRM_PT....
(Message no. SR053)
The Hierarchy mentioned in the message refers to one that was created manually in CRM before the initial load.
It was under my understanding that the only hierarchy impacted by the initial load was the R3MATCLASS, then why is this error generated for another hierarchy that should not be involved?
Regarding this issue I feel I have two options:
1. Delete the hierarchy in CRM and restart the initial load. (The only problem here is that I have found it really dificult to carry out the deletion, because it means I have to delete products and IObjects created in CRM that are associated to this hierarchy)
2. Try to find a way to prevent error to appear in the inbound queue. (for example in debugging try to bypass the logic that processes the manually created hierarchy)
Please I would greatly appreciate to get an answer from anyone that has encounterd similar problems.
Thanks in advance,
Pedro

Dear Efrain Pacheco
Just have a look into the corresponding entry in ST22 .
The problem persists due to the duplicate entries in the table T023 or .
Delete them directly from the table using se16:
Select the entries in the classic view (not ALV or grid view). activate the debugger.
Press the view button. --> you'll enter in the debugger
Press F7
Locate the sy-ucomm variable & change it to "DELE".
Press F8
Delete the entries.
Trick-shots but it works!
Let me know in case of any persistent problems .
<b> Note: Reward points if it helps</b>
Thanks & Regards
Jaman

IDM: AS ABAP - Initial Load

Hi,
I have installed IDM server and completed all the initial configuration steps.
I have created repository which connects to the IDES server using the template SAP Netweaver AS ABAP (specific application server).
Now i am running initial load for that repository but nothing is happening. I cant see any job log,system log for that initial load.
I have created another blank test job , which i execute and running fine.I can see the log of that blank job.But nothing is there for the job Initial Load.
schedule rule : on demand and i am executing it by clicking on RUN NOW. If i see the status of the job it shows idle.
Can you please help me in this?
Edited by: Abhilashak on May 5, 2011 9:13 AM

First, make sure it is set to use the correct dispatcher.
Second, go to the Status area for whatever folder that job is in. It should list all jobs for that folder, and any jobs that are "queued" will be bolded.
If it is bolded (it probably will be), it means that the job is queued to run but the dispatcher isn't running it for some reason. In that case, it could be the dispatcher it is set to run on isn't configured properly... Not sure what else would cause that.
I'm talking about this status area:
http://min.us/mvjy3gm

SYSFAIL error SMQ2 during initial load of PLANTs

Hello Everyone,
We are on CRM50 and during the process of the initial download of plants not all plants were replicated. Now we are attempting another load using DNL_PLANT and getting the following error:
Business partner ##1 does not exist. I have not seen this error before and I am not sure how to proceed.
Thanks in advance for your help.
Cheers
Wiktor

Hello Tiest,
That did not seem to be the issue. I went through and validated the load objects and there was some new configuration in the sales area which I moved over. All other objects loaded correctly.
When I executed DNL_PLANT got:
Not all address numbers have yet been issued.
More confused then before. Any other thoughts?
Thanks for the help!
Cheers
Wiktor

Error in Material Initial Load.

Hi Gurus,
I am replicating materials from ECC to SRM, but the BDOcs in SMW01 have errors, alhtough they appear succesful.
The error is: "Mat. for Initial Download: Table not supported by function - Message no. C_"
All the materials have been replicated, but what is missing are three custom fields that we need to replicate from ECC and for which we have made an enhancment.
This issue is happening in QAS, and in DEV everything went fine. We have checked and all the transports have been succesfully moved from DEV to QAS.
Please help.
thanks!
Edited by: Michele Camuri on Apr 8, 2009 12:02 AM

i had the same problem and the problem comes because of the following reason.
1) the product category corresponding to the material is not available (or) is still not replicated in the SRM system.
solution is a) check whether all the product categories are already replicated correctly in the SRM system , if not restart the replication of master data ( product category, unit of measure).
b) once the product category is available , then restart the inbound queue , so that the replication of the material is started again.

Order Type Transaction Error in Customer_Main Initial Load

Hi,
We have recently copied back our Production System to our Test System in R/3. We are now in the process of filtering the CUSTOMER_MAIN into our CRM 2007 Test System from the new updated Test System in R/3
However, when loading the objects into CRM we are getting the following BDoc errors in smw01:
Business transaction type ZXXX does not exist
Area: CRM_ORDERADM_H
No.500
These are Order Types that have been created in the R/3 System. However, how can we prevent these order types from coming across??
Order Types are not relevant to us when we are bringing across Customers.
Thanks,
Jonathan

Hi,
Check and update filter settings in SALESDOCUMENT adapter object in R3AC1.
//PBP

Microsoft JScript compilation error alert on initial load using IE7

I have noticed that a javascript alert window is displayed whenever an Applet is initially launched using IE7.
This does not happen using IE8 (or FF, SF, Chrome, etc).
I thought it was our implementation, but the alert is also shown launching any Applet from the following;
http://java.sun.com/applets/jdk/
There are typically 2 alerts and after pressing OK, the Applets appear to run successfully.
The specific error is;
Alert title: Microsoft JScript compilation error.
Alert content: Expected ')' in regular expression.
I don't always remember this error using IE7.
Maybe it's related to the JRE?
I am currently using: (build 1.6.0_26-b03)
Any solution out there?

879129 wrote:
..I thought it was our implementation, but the alert is also shown launching any Applet from the following;
http://java.sun.com/applets/jdk/
I just had a look at the source of two of the pages from the 1.4 section of that page (Animator (1) & ArcTest) & saw some very questionable HTML for the <tt>applet</tt> element, as well as two seemingly unrelated scripts. What do you get for (instead of those), the GIF Animator (the applet form)? It uses <tt>deployJava.js</tt>, which is about the only deployment option that Oracle cares about at the moment.

ABAP - CUA : Initial load : too many records in the CUA?

We are running :
SP03 for IDENT. CENTER DESIGNTIME 7.1 Patch 0
SP03 for IDENTITY CENTER RUNTIME 7.1 Patch 1
SP03 for NW IDM IC UIS 7.00 Patch 1
We have connected our customer's CUA system to IdM : we created an Identity Store called 'SAP_Master', created the CUA repository, defined the required attributes as defined in the guide 'IDM 7.1 - IdM For SAP Systems - Configuration 7-3.pdf', created the jobs based upon the templates etc. The dispatcher used has 'run provisioning jobs' disabled.
On our sandbox server, when we connect to our sandbox CUA system (CUA_YS5_200), everything is ok, the 'AS ABAP - Initial load' job with only 'ReadABAPRoles' enabled, runs fine.
On our QA system, when we connect to our 'production' CUA system (CUA_YP0_400), the 'AS ABAP - Initial load' job with
only 'ReadABAPRoles' enabled, finished with message 'could not start job, rescheduling'. Since there is a huge number of records (we looked it up in the system : 311.679 records), we decided to switch on parameter 'bootstrap job'. Now the result is that it takes forever, after half a day the job is still running. In the database, table 'sapCUA_YP0_400role' is still completely empty (no records). Therefore, it seemed interesting to connect our QA IdM system to our development CUA system (CUA_YS5_200). After a while, the exact same job has finished and table 'sapCUA_YS5_200role' contains 18.580 records.
After some additional testing, we might have discoved the cause of the issue could be that the number of records in our CUA is too big.
In the java code of the fromSAP pass there are 2 calls to the SAP system for reading the roles into Idm. The first one reads table USRSYSACT (311.000 records), the second one reads table USRSYSACTT (1.000.000 records). All these records are stored into a java hashmap - we think that 1 million records exceeds the hashmaps capability, although no java error is thrown.
When we debug the functionmodule RFC_READ_TABLE and change the rowcount to 100.000 then everything works fine. When we set the rowcount to 200.000 the java-code does not generate an error but the job in idm never
ends...
When running functionmodule RFC_READ_TABLE in the backend system the 1.000.000 records are processed in less than one minute. So apparently, the issue is related to the processing in the Java code.
Java Dispatcher heap size is set to 1024.
Anybody already came accros this issue?
Thanks & best regards,
Kevin

Installing the patch, re- importing the SAP Provisioning framework (I selected 'update') and recreating the jobs didn't yield any result.
When examining pass 'ReadABAPRoles' of Job 'AS ABAP - Initial Load' -> tab 'source', there are no scripts used .
After applying the patch we decided anyway to verify the scripts (sap_getRoles, sap_getUserRepositories) in our Identity Center after those of 'Note 1398312 - SAP NW IdM Provisioning Framework for SAP Systems' , and they are different
File size of SAP Provisioning Framework_Folder.mcc of SP3 Patch 0 and Patch 1 are also exactly the same.
Opening file SAP Provisioning Framework_Folder.mcc with Wordpad : searched for 'sap_getRoles' :
<GLOBALSCRIPT>
<SCRIPTREVISIONNUMBER/>
<SCRIPTLASTCHANGE>2009-05-07 08:00:23.54</SCRIPTLASTCHANGE>
<SCRIPTLANGUAGE>JScript</SCRIPTLANGUAGE>
<SCRIPTID>30</SCRIPTID>
<SCRIPTDEFINITION> ... string was too long to copy
paste ... </SCRIPTDEFINITION>
<SCRIPTLOCKDATE/>
<SCRIPTHASH>0940f540423630687449f52159cdb5d9</SCRIPTHASH>
<SCRIPTDESCRIPTION/>
<SCRIPTNAME>sap_getRoles</SCRIPTNAME>
<SCRIPTLOCKSTATE>0</SCRIPTLOCKSTATE>
-> Script last change 2009-05-07 08:00:23.54 -> that's no update !
So I assume the updates mentioned in Note 1398312 aren't included in SP3 Patch 1. Manually replaced the current scripts with those of the note and re- tested : no luck. Same issue.
Thanks again for the help,
Kevin

Initial Load from ABAP Failed

Hi.
Initial load from ABAP described in following PDF document failed.
Identity Management for SAP System Landscapes: Configuration Guide
http://service.sap.com/~sapidb/011000358700001449662008E
System log Error
lang.ExceptionInInitializerError: JCO.classInitialize(): Could not load middleware layer 'com.sap.mw.jco.rfc.MiddlewareRFC'
JCO.nativeInit(): Could not initialize dynamic link library sapjcorfc [C:\WINDOWS\system32\sapjcorfc.dll: Can't find dependent libraries]. java.library.path [C:\Program Files (x86)\Java\j2re1.4.2_16\bin;.;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\system32;C:\WINDOWS;......
Environment is
IdM 7.1
NW AS JAVA 7.0 SP 17
Windows 2003 Server 64bit
SQL Server
Any help will be most appreciated !

Hi You Nakamura,
We are facing the same problem during AS ABAP - initial load with the same error message.
I downloaded the msvcp71.dll file and placed it in System32 folder. But the problem remains the same (even after server restart).
The system log shows the same error message and no entries in job log.
Please let me know if you had followed any different way to install the dll file.
Regards,
Vijay.K

Error AS ABAP initial load

Similar Messages

Maybe you are looking for