Error assertion failed

Despues de comprar e instalar el Software Lightroom, y abrir, me da el error "asserion failed". Alguien por favor me puede ayudar a resolver esto?

No has utilizado una versión anterior o de prueba antes?
Puedes detallar qué versión exacta de Lightroom usas, OSX, Windows....?
Dónde (en qué disco) guardas tus colecciones...
Tienes que limpiar tus preferencias.
http://helpx.adobe.com/lightroom/kb/preference-file-locations-lightroom-4.html
Prueba también lo siguiente:
Abre LR y acepta (OK) esos mensajes.
En Editar > Preferencias > General>Catálogo por defecto> selecciona avisar al iniciar LR
Cierra LR y vuelve a abrirlo.
Aparecerá un cuadro para que escojas un catálogo, escoge Crear nuevo catálogo.
Dale un nombre y localización y Guarda.
LR muestra entonces Archivo>Importar de catálogo, escoge el catálogo que usabas antes de este problema,
En edición>Ajustes de catálogos, selecciona que LR haga un backup cada vez que inicies el programa. (Prueba esto por seguridad, antes de empezar a trabajar con LR).

Similar Messages

Internal error: assertion failed - still won't work in LR4

When I try to export an image from LR4 I get the "internal error: assertion failed" error. I'm running Lion 10.7.3 on a MacBook.
I started by reading the thread at:
Re: "internal error: assertion failed" when exporting via LR4
tinaTS offered what she thought was the correct fix but her suggestion didn't apply to my situation. She suggested moving user presets but I don't have any to move.
I also tried the basic “repair permissions” and Lion restart with no luck.
Kirk Marcus suggested removing the com.adobe.Lightroom4.plist from my library. This didn't help, still getting the error.
Then I removed these files as well:
com.adobe.Lightroom3.plist
com.adobe.Lightroom2.plist
com.adobe.Lightroom3.LSSharedFileList.plist
com.adobe.Lightroom3.plist.lockfile
None of that helped.
I tried removing all files that began with com.adobe.Lightroom and then creating a new library and just importing one picture but I still get the same "internal error" VERY FRUSTRATING.
Obviously, the program is worthless to me if I can't export images.
Additional suggestions would be appreciated. I see that lots of people on the internet are having this problem but none of the suggestions I've found so far have been of any help.

Thanks for the suggestions. I tried removing the com.adobe.Lightroom4.plist. This didn't help, still getting the error.
Then I removed these files as well:
com.adobe.Lightroom3.plist
com.adobe.Lightroom2.plist
com.adobe.Lightroom3.LSSharedFileList.plist
com.adobe.Lightroom3.plist.lockfile
None of that helped.
I tried creating a new library and just importing one picture but I still get the same "internal error" VERY FRUSTRATING.

SQL error: Internal database error *** ERROR *** Assertion failed: 201501 (10.0.1.3415)

A SQLA10 production database has been crashing at a customer site.
Here's the error which displayed when I tried to unload the database...
Unloading "DBA"."schedule_profile" into C:\resq\resqprod2\db\unload\719.dat (relative to server)
Unloading "DBA"."schedules" into C:\resq\resqprod2\db\unload\720.dat (relative to server)
***** SQL error: Internal database error *** ERROR *** Assertion failed: 201501 (10.0.1.3415)
Page for requested record not a table page or record not present on page -- transaction rolled back
The database 'C:\resq\resqprod2\db\resqprod2.db' could not be unloaded.
The database 'C:\resq\resqprod2\db\resqprod2.db' could not be unloaded.
I think that backups may also have this error.
Can the database be salvaged?
Thank you,
Doug

Hi Doug,
The error seems to be saying that a pointer is pointing to an invalid page.
Actually, the assertion message is suggesting that we were scanning for a row (record) on a particular page where we expected to find it, and didn't - the table page is likely corrupt.
Does a utility exist which would eliminate all pointers to invalid pages?
No. If the database is corrupted, it is best to move to your database recovery procedure from a valid backup. See KBA 1959391 - How can a SQL Anywhere (stand alone) database be restored from a full or incremental backup?
If you do not have a valid database backup but can still start and connect to the corrupted database (and it seems that you can), you can attempt to salvage the data out of the corrupted database tables manually to extract it to a new database (as Jinwoo suggested). See KBA 1959030 - How To Salvage Data When There are Corrupt Pages in the Database. Using -e to skip tables is appropriate and then trying to select the data that is not contained on invalid pages via the KBA instructions is your best option in this case.
Does sap/sybase offer a recovery service?
No, there is no such "recovery service" underneath SAP and any previous mentions of salvages were one-off contracts underneath Sybase Professional Services, and not a technical support service. These contracts are not available at SAP.
This topic was discussed thoroughly on the SQL Anywhere forum ( http://sqlanywhere-forum.sap.com/ ) previously here and here.
The prevention for this situation is to have properly validated backups, preferably in multiple backup generations to provide many opportunities for recovery. See: http://wiki.scn.sap.com/wiki/x/3QNcFg
Regards,
Jeff Albion
SAP Active Global Support

Error : Assertion failed: loc2mode(dst) == loc2mode(src),

Hi
While applying RUP3 , the patch failed for a customer for an rtf report.
with the error
Assertion failed: loc2mode(dst) == loc2mode(src), file
./srcjava/sys/alpha/compiler.c, line
5403
This error has been popping up for many customers till now but they were suggested
workarounds which states them to upload the patch without the rtf report and later upload the
rtf report manually.
The error seem to have occured for a specific platform HP TRU64 Unix platform, where the FAST VM of that platform doesnot support 'AutoShapes' of the templates.
So whichever template have autoshapes in them, will error out. Whenever we build any templates we do use tables to place the fields in proper places of the template. We cannot do away with tables.
Apart from tables we dont use any other features of autoshapes. Please suggest if you have come across this issue before or aware of any permanent solution, which we can make sure in building the rtf templates, so that such errors dont occur.
Regards,
Rajiv Sengupta

Rajiv
Please log an SR with support and have them log a bug. We'll need the templates that are failing and the patch you are trying to apply.
tim

Win 7 AVMS_APP_2.0.2.1 After Install getting Error Assertion Failed

Hi I've installed the Cisco Video Monitoring System on 2 of the desktops running Windows 7 pro Sp1 but when i try to run Main Console I keep getting Assertion Failed Error even if I right click and Run as Administrator and UAC is disable, After clicking on Ignore button few times , then VMS will close by itself.
details of the error windows:
Assertion Failed
Program:...
File:\..\..\Src\Util\NuCrtLocale.cpp
Line:61
Expension:0
For Information on how your program can cause an assertion failure, see the Visual C++ documents on assert
(Press Retry to Debug the application - JIT must be enable)
My windows is up to date and checked all MS Visual C++ 2005 , 2008, 2010 is installed in control panel/programs and features, I've no problem accessing the WVC210 camera via web browser. I've also tried uninstalled and reinstall VMS few times Run as Admin but still getting same error. Please kindly help how can I fix this problem. Thanks in advance !
CN

Try applying the following OSS Notes:
[OSS Note 1050275 - ASSERTION_FAILED in CL_RSTRAN_FOBU_APPL->GET_CODE|https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1050275] (relevant to prior to BI 7 SP14)
[OSS Note 1115923 - Check or transfer of empty formulas causes runtime error|https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1115923] (relevant to prior to BI 7 SP17).

Oracle Coherence EE 3.6.1.3 Error Assertion failed

Hi
We are getting below exception on coherence.log very frequently.
[00:00:57:957] [ERROR] [Logger@9244746 3.6.1.3] [Coherence] [] [2011-12-21 00:00:57.957/681492.304 Oracle Coherence EE 3.6.1.3 <Error> (thread=pool-1-thread-1, member=3): An exception was thrown while reaping a session.
com.tangosol.coherence.servlet.commonj.WorkException: Work Failed.
at com.tangosol.coherence.servlet.commonj.impl.WorkItemImpl.run(WorkItemImpl.java:162)
at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:885)
at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:907)
at java.lang.Thread.run(Thread.java:619)
Caused by: com.tangosol.util.AssertionException: Assertion failed:
at com.tangosol.util.Base.azzertFailed(Base.java:208)
at com.tangosol.util.Base.azzert(Base.java:165)
at com.tangosol.coherence.servlet.AbstractHttpSessionModel.enter(AbstractHttpSessionModel.java:1498)
at com.tangosol.coherence.servlet.AbstractHttpSessionCollection.enter(AbstractHttpSessionCollection.java:645)
at com.tangosol.coherence.servlet.AbstractReapTask.checkAndInvalidate(AbstractReapTask.java:132)
at com.tangosol.coherence.servlet.ParallelReapTask$ReapWork.run(ParallelReapTask.java:81)
at com.tangosol.coherence.servlet.commonj.impl.WorkItemImpl.run(WorkItemImpl.java:159)
Any one have IDEA about these exceptions.

These exceptions are thrown by the session reaper when a session is being concurrently reaped by a different reaper thread. They are harmless, and have no impact on your running systems beyond the annoying stack traces. The session will be successfully reaped. This issue was resolved in Coherence*Web 3.7.

Error "Assert Failed FlashplayerPlugin"

Hello,
Since a few days i have an error message named "ASSERT Failed" FlashPlayerPlugin_11_8_800_94.exe Module MV360Stream.dll". See this printscreen:
I have tried to uninstall and reinstall flashplayer, but nothing changes. I have windows 7 x64, and Firefox 22. I have another problem, when i click on a link from an email in thunderbird to open in a website, nothing happen. I must copy the link and paste in firefox. I don't know if theses problems are related.
Is there somebody who can help me please to fix this problem?
Thanks a lot!
PS: I hope that you will understand my "poor english" !

I've moved this to the Using Flash Player forums to better help you.
I have filed the following bug on your behalf. I also escalated the issue to our engineering team.
https://bugbase.adobe.com/index.cfm?event=bug&id=3612637

Severe Error: Assertion Failed: config element named "default-config"

I ran the command:
./asadmin verify-domain-xml domain1
This returned the message:
May 8, 2006 3:16:43 PM com.sun.enterprise.config.serverbeans.validation.DomainXmlVerifier invokeConfigValidator
SEVERE: /domain[1]/configs[1]: Assertion Failed: There is a config element named "default-config"
/domain[1]/resources[1]/jdbc-connection-pool[@name='PetroPool']: Warning: Assertion Failed: each jdbc-connection-pool is referenced by a jdbc-resource
I return a SEVERE and a Warning message, I googled the severe message without any luck and I was wondering if this has been troubleshooted before.
I'd appreciate any insight or instructions to correct this.
Thanks,

Kedar: Thank you for the feedback, I don't remember changing any templates. Only adding a connection pool.
Here is my domain.xml:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE domain PUBLIC "-//Sun Microsystems Inc.//DTD Application Server 8.0 Domain//EN" "http://www.sun.com/software/appserver/dtds/sun-domain_1_1.dtd">


<domain application-root="${com.sun.aas.instanceRoot}/applications" log-root="${com.sun.aas.instanceRoot}/logs">
<applications>
<j2ee-application availability-enabled="false" directory-deployed="false" enabled="true" location="${com.sun.aas.instanceRoot}/applications/j2ee-apps/MEjbApp" name="MEjbApp" object-type="system-all"/>
<j2ee-application availability-enabled="false" directory-deployed="false" enabled="true" location="${com.sun.aas.instanceRoot}/applications/j2ee-apps/__ejb_container_timer_app" name="__ejb_container_timer_app" object-type="system-all"/>
<web-module availability-enabled="false" context-root="/web1" directory-deployed="true" enabled="true" location="${com.sun.aas.installRoot}/lib/install/applications/adminapp/adminapp_war" name="adminapp" object-type="system-admin">

</web-module>
<web-module availability-enabled="false" context-root="/asadmin" directory-deployed="true" enabled="true" location="${com.sun.aas.installRoot}/lib/install/applications/admingui/adminGUI_war" name="admingui" object-type="system-admin">

</web-module>
<web-module availability-enabled="false" context-root="/com_sun_web_ui" directory-deployed="true" enabled="true" location="${com.sun.aas.installRoot}/lib/install/applications/com_sun_web_ui" name="com_sun_web_ui" object-type="system-admin">

</web-module>
<web-module availability-enabled="false" context-root="jsfcomponents" directory-deployed="false" enabled="true" location="${com.sun.aas.instanceRoot}/applications/j2ee-modules/jsfcomponents" name="jsfcomponents" object-type="user">
<description>JSF Components Example</description>
</web-module>
</applications>
<resources>
<jdbc-resource enabled="true" jndi-name="jdbc/__TimerPool" object-type="system-admin" pool-name="__TimerPool"/>
<jdbc-resource enabled="true" jndi-name="jdbc/__default" object-type="user" pool-name="DerbyPool"/>
<jdbc-connection-pool connection-validation-method="auto-commit" datasource-classname="org.apache.derby.jdbc.EmbeddedXADataSource" fail-all-connections="false" idle-timeout-in-seconds="300" is-connection-validation-required="false" is-isolation-level-guaranteed="true" max-pool-size="32" max-wait-time-in-millis="60000" name="__TimerPool" pool-resize-quantity="2" res-type="javax.sql.XADataSource" steady-pool-size="8">
<property name="databaseName" value="${com.sun.aas.instanceRoot}/lib/databases/ejbtimer"/>
</jdbc-connection-pool>
<jdbc-connection-pool connection-validation-method="auto-commit" datasource-classname="org.apache.derby.jdbc.ClientDataSource" fail-all-connections="false" idle-timeout-in-seconds="300" is-connection-validation-required="false" is-isolation-level-guaranteed="false" max-pool-size="32" max-wait-time-in-millis="60000" name="DerbyPool" pool-resize-quantity="2" res-type="javax.sql.DataSource" steady-pool-size="8">
<property name="PortNumber" value="1527"/>
<property name="Password" value="APP"/>
<property name="User" value="APP"/>
<property name="serverName" value="localhost"/>
<property name="DatabaseName" value="sun-appserv-samples"/>
<property name="connectionAttributes" value=";create=true"/>
</jdbc-connection-pool>
<jdbc-connection-pool connection-validation-method="auto-commit" datasource-classname="oracle.jdbc.pool.OracleConnectionPoolDataSource" fail-all-connections="false" idle-timeout-in-seconds="300" is-connection-validation-required="false" is-isolation-level-guaranteed="false" max-pool-size="20" max-wait-time-in-millis="60000" name="PetroPool" pool-resize-quantity="2" res-type="javax.sql.ConnectionPoolDataSource" steady-pool-size="8">
<description>Petro 2 System Pool</description>
<property name="user" value="user"/>
<property name="port" value="1521"/>
<property name="password" value="password"/>
<property name="databaseName" value="DATABASENAME"/>
<property name="serverName" value="SERVERNAME"/>
<property name="url" value="jdbc:oracle:thin:@[IP]:1521:database"/>
<property name="datasourceName" value="url"/>
</jdbc-connection-pool>
</resources>
<configs>
<config dynamic-reconfiguration-enabled="true" name="server-config">
<http-service>
<http-listener acceptor-threads="5" address="0.0.0.0" blocking-enabled="false" default-virtual-server="server" enabled="true" family="inet" id="http-listener-1" port="8080" security-enabled="false" server-name="" xpowered-by="true">
</http-listener>
<http-listener acceptor-threads="5" address="0.0.0.0" blocking-enabled="false" default-virtual-server="server" enabled="true" family="inet" id="http-listener-2" port="8181" security-enabled="true" server-name="" xpowered-by="true">
</http-listener>
<http-listener acceptor-threads="5" address="0.0.0.0" blocking-enabled="false" default-virtual-server="__asadmin" enabled="true" family="inet" id="admin-listener" port="4848" security-enabled="false" server-name="" xpowered-by="true">
</http-listener>
<virtual-server hosts="${com.sun.aas.hostName}" http-listeners="http-listener-1,http-listener-2" id="server" log-file="${com.sun.aas.instanceRoot}/logs/server.log" state="on">
<property name="docroot" value="${com.sun.aas.instanceRoot}/docroot"/>
<property name="accesslog" value="${com.sun.aas.instanceRoot}/logs/access"/>
</virtual-server>
<virtual-server default-web-module="admingui" hosts="${com.sun.aas.hostName}" http-listeners="admin-listener" id="__asadmin" log-file="${com.sun.aas.instanceRoot}/logs/server.log" state="on">
<property name="docroot" value="${com.sun.aas.instanceRoot}/docroot"/>
<property name="accesslog" value="${com.sun.aas.instanceRoot}/logs/access"/>
</virtual-server>
</http-service>
<iiop-service client-authentication-required="false">
<orb max-connections="1024" message-fragment-size="1024" use-thread-pool-ids="thread-pool-1"/>
<iiop-listener address="0.0.0.0" enabled="true" id="orb-listener-1" port="3700" security-enabled="false"/>
<iiop-listener address="0.0.0.0" enabled="true" id="SSL" port="3820" security-enabled="true">
<ssl cert-nickname="s1as" client-auth-enabled="false" ssl2-enabled="false" ssl3-enabled="true" tls-enabled="true" tls-rollback-enabled="true"/>
</iiop-listener>
<iiop-listener address="0.0.0.0" enabled="true" id="SSL_MUTUALAUTH" port="3920" security-enabled="true">
<ssl cert-nickname="s1as" client-auth-enabled="true" ssl2-enabled="false" ssl3-enabled="true" tls-enabled="true" tls-rollback-enabled="true"/>
</iiop-listener>
</iiop-service>
<admin-service system-jmx-connector-name="system" type="das-and-server">

<jmx-connector accept-all="false" address="0.0.0.0" auth-realm-name="admin-realm" enabled="true" name="system" port="8686" protocol="rmi_jrmp" security-enabled="false"/>

<das-config admin-session-timeout-in-minutes="60" autodeploy-dir="${com.sun.aas.instanceRoot}/autodeploy" autodeploy-enabled="true" autodeploy-jsp-precompilation-enabled="false" autodeploy-polling-interval-in-seconds="2" autodeploy-verifier-enabled="false" deploy-xml-validation="full" dynamic-reload-enabled="true" dynamic-reload-poll-interval-in-seconds="2"/>
</admin-service>
<web-container/>
<ejb-container cache-idle-timeout-in-seconds="600" cache-resize-quantity="32" commit-option="B" max-cache-size="512" max-pool-size="32" pool-idle-timeout-in-seconds="600" pool-resize-quantity="8" removal-timeout-in-seconds="5400" session-store="${com.sun.aas.instanceRoot}/session-store" steady-pool-size="0" victim-selection-policy="nru">
<ejb-timer-service max-redeliveries="1" minimum-delivery-interval-in-millis="7000" redelivery-interval-internal-in-millis="5000"/>
</ejb-container>
<mdb-container idle-timeout-in-seconds="600" max-pool-size="32" pool-resize-quantity="8" steady-pool-size="0"/>
<jms-service addresslist-behavior="random" addresslist-iterations="3" default-jms-host="default_JMS_host" init-timeout-in-seconds="60" reconnect-attempts="3" reconnect-enabled="true" reconnect-interval-in-seconds="60" type="LOCAL">
<jms-host admin-password="admin" admin-user-name="admin" host="dev-energy-ora.dtnenergy.com" name="default_JMS_host" port="7676"/>
</jms-service>
<log-service alarms="false" file="${com.sun.aas.instanceRoot}/logs/server.log" log-rotation-limit-in-bytes="2000000" log-rotation-timelimit-in-minutes="0" log-to-console="false" use-system-logging="false">
<module-log-levels admin="INFO" classloader="INFO" cmp="INFO" cmp-container="INFO" configuration="INFO" connector="INFO" corba="INFO" deployment="INFO" ejb-container="INFO" javamail="INFO" jaxr="INFO" jaxrpc="INFO" jdo="INFO" jms="INFO" jta="INFO" jts="INFO" mdb-container="INFO" naming="INFO" node-agent="INFO" resource-adapter="INFO" root="INFO" saaj="INFO" security="INFO" server="INFO" synchronization="INFO" util="INFO" verifier="INFO" web-container="INFO"/>
</log-service>
<security-service anonymous-role="ANYONE" audit-enabled="false" audit-modules="default" default-realm="file" jacc="default">

<auth-realm classname="com.sun.enterprise.security.auth.realm.file.FileRealm" name="admin-realm">
<property name="file" value="${com.sun.aas.instanceRoot}/config/admin-keyfile"/>
<property name="jaas-context" value="fileRealm"/>
</auth-realm>

<auth-realm classname="com.sun.enterprise.security.auth.realm.file.FileRealm" name="file">
<property name="file" value="${com.sun.aas.instanceRoot}/config/keyfile"/>
<property name="jaas-context" value="fileRealm"/>
</auth-realm>
<auth-realm classname="com.sun.enterprise.security.auth.realm.certificate.CertificateRealm" name="certificate">
</auth-realm>
<jacc-provider name="default" policy-configuration-factory-provider="com.sun.enterprise.security.provider.PolicyConfigurationFactoryImpl" policy-provider="com.sun.enterprise.security.provider.PolicyWrapper">
<property name="repository" value="${com.sun.aas.instanceRoot}/generated/policy"/>
</jacc-provider>
<audit-module classname="com.sun.enterprise.security.Audit" name="default">
<property name="auditOn" value="false"/>
</audit-module>
<message-security-config auth-layer="SOAP">

<provider-config class-name="com.sun.xml.wss.provider.ClientSecurityAuthModule" provider-id="ClientProvider" provider-type="client">
<request-policy auth-source="content"/>
<response-policy auth-source="content"/>
<property name="security.config" value="${com.sun.aas.instanceRoot}/config/wss-server-config.xml"/>
</provider-config>
<provider-config class-name="com.sun.xml.wss.provider.ServerSecurityAuthModule" provider-id="ServerProvider" provider-type="server">
<request-policy auth-source="content"/>
<response-policy auth-source="content"/>
<property name="security.config" value="${com.sun.aas.instanceRoot}/config/wss-server-config.xml"/>
</provider-config>
</message-security-config>
</security-service>
<transaction-service automatic-recovery="false" heuristic-decision="rollback" keypoint-interval="2048" retry-timeout-in-seconds="600" timeout-in-seconds="0" tx-log-dir="${com.sun.aas.instanceRoot}/logs"/>
<monitoring-service>
<module-monitoring-levels connector-connection-pool="OFF" connector-service="OFF" ejb-container="OFF" http-service="OFF" jdbc-connection-pool="OFF" jms-service="OFF" jvm="OFF" orb="OFF" thread-pool="OFF" transaction-service="OFF" web-container="OFF"/>
</monitoring-service>
<java-config debug-enabled="false" debug-options="-Xdebug -Xrunjdwp:transport=dt_socket,server=y,suspend=n,address=9009" env-classpath-ignored="true" java-home="${com.sun.aas.javaRoot}" javac-options="-g" rmic-options="-iiop -poa -alwaysgenerate -keepgenerated -g" server-classpath="${com.sun.aas.installRoot}/lib/install/applications/jmsra/imqjmsra.jar${path.separator}${com.sun.aas.imqLib}/jaxm-api.jar${path.separator}${com.sun.aas.imqLib}/fscontext.jar${path.separator}${com.sun.aas.antLib}/ant.jar">

<jvm-options>-client</jvm-options>
<jvm-options>-Djava.endorsed.dirs=${com.sun.aas.installRoot}/lib/endorsed</jvm-options>
<jvm-options>-Djava.security.policy=${com.sun.aas.instanceRoot}/config/server.policy</jvm-options>
<jvm-options>-Djava.security.auth.login.config=${com.sun.aas.instanceRoot}/config/login.conf</jvm-options>
<jvm-options>-Dsun.rmi.dgc.server.gcInterval=3600000</jvm-options>
<jvm-options>-Dsun.rmi.dgc.client.gcInterval=3600000</jvm-options>
<jvm-options>-Xmx512m</jvm-options>
<jvm-options>-Djavax.net.ssl.keyStore=${com.sun.aas.instanceRoot}/config/keystore.jks</jvm-options>
<jvm-options>-Djavax.net.ssl.trustStore=${com.sun.aas.instanceRoot}/config/cacerts.jks</jvm-options>
<jvm-options>-Djava.ext.dirs=${com.sun.aas.javaRoot}/jre/lib/ext${path.separator}${com.sun.aas.instanceRoot}/lib/ext${path.separator}${com.sun.aas.derbyRoot}/lib</jvm-options>
<jvm-options>-Djdbc.drivers=org.apache.derby.jdbc.ClientDriver</jvm-options>
<jvm-options>-Djavax.management.builder.initial=com.sun.enterprise.admin.server.core.jmx.AppServerMBeanServerBuilder</jvm-options>
<jvm-options>-Dcom.sun.enterprise.config.config_environment_factory_class=com.sun.enterprise.config.serverbeans.AppserverConfigEnvironmentFactory</jvm-options>
<jvm-options>-Dcom.sun.enterprise.taglibs=appserv-jstl.jar,jsf-impl.jar</jvm-options>
<jvm-options>-Dcom.sun.enterprise.taglisteners=jsf-impl.jar</jvm-options>
<jvm-options>-XX:NewRatio=2</jvm-options>
</java-config>
<thread-pools>
<thread-pool idle-thread-timeout-in-seconds="120" max-thread-pool-size="200" min-thread-pool-size="0" num-work-queues="1" thread-pool-id="thread-pool-1"/>
</thread-pools>
</config>

</configs>
<servers>
<server config-ref="server-config" name="server">
<application-ref disable-timeout-in-minutes="30" enabled="true" lb-enabled="false" ref="adminapp" virtual-servers="__asadmin"/>
<application-ref disable-timeout-in-minutes="30" enabled="true" lb-enabled="false" ref="admingui" virtual-servers="__asadmin"/>
<application-ref disable-timeout-in-minutes="30" enabled="true" lb-enabled="false" ref="com_sun_web_ui" virtual-servers="__asadmin"/>
<application-ref disable-timeout-in-minutes="30" enabled="true" lb-enabled="false" ref="MEjbApp" virtual-servers="server"/>
<application-ref disable-timeout-in-minutes="30" enabled="true" lb-enabled="false" ref="__ejb_container_timer_app" virtual-servers="server"/>
<application-ref disable-timeout-in-minutes="30" enabled="true" lb-enabled="false" ref="jsfcomponents" virtual-servers="server"/>
<resource-ref enabled="true" ref="jdbc/__TimerPool"/>
<resource-ref enabled="true" ref="jdbc/__default"/>
</server>
</servers>
<property name="administrative.domain.name" value="domain1"/>
</domain>
I'm still having this issue, thus any thoughts or ideas are greatly appreciated.
Thanks,
--Todd

System copy:Import, error "Assertion failed: Unable to load database"

Good afternoon.
Imports the system. Step to create a database I receive an error (see screenshot). Version 6.0 EHP FOR SAP 6.0. Version SWMP 70SWPM10SP03_9-20009707. But there is a caveat. Current version Sybase 15.7.0.103, and dannyts SWMP version supports only up to 041 Sybase version. When installing I use dump database derived from the 103 Sybase version. I believe the difference in the versions of this error occurs. What can you do in this situation?

After run Sybase service a have a message in sapinst_dev.log
INFO       2014-03-11 14:37:23.660
           CJSlibModule::writeInfo_impl()
Execution of the command "isql -w999 -Usa -Sgomo:4901" finished with return code 0. Output:
Password:
name             db_size                                              owner                dbid             created                                          durability                               lobcomplvl                               inrowlen                         status
LVT                122880.0 MB                                        sa                      4             Mar 07, 2014                                     full                                            100                                   2000                         trunc log on chkpt, don't recover, ddl in tran, allow nulls by default, abort tran on log full, offline, allow wide dol rows, page compression,full logging for all
(1 row affected)
device_fragments               size          usage                created                   free kbytes
LVT_data_001                     112640.0 MB data only            Mar 7 2014 3:50PM              114879680
LVT_log_001                       10240.0 MB log only             Mar 7 2014 3:50PM       not applicable
(return status = 0)
TRACE      2014-03-11 14:37:23.660

"internal error: assertion failed" when exporting via LR4

I've never had problems doing this with Lightroom 3, just upgraded to Lightroom 4 and I can't seem to export anything. I also can't publish either.

Thanks for the suggestions. I tried removing the com.adobe.Lightroom4.plist. This didn't help, still getting the error.
Then I removed these files as well:
com.adobe.Lightroom3.plist
com.adobe.Lightroom2.plist
com.adobe.Lightroom3.LSSharedFileList.plist
com.adobe.Lightroom3.plist.lockfile
None of that helped.
I tried creating a new library and just importing one picture but I still get the same "internal error" VERY FRUSTRATING.

"internal error: assertion failed" when publishing to harddisk

Hello there!
After upgrading to 3.5 from 3.4.1 I received this error when attempting to publish new photos to my harddisk. First I thought the problem may be related to access rights. I am running Win7, 64 bit. So I reset the read/write rights in the export folder and the LR catalogue and AppData folders. No success.
Then I opened a new cataloge and imported the old one in order to start "from scratch" - no success, publishing collections were not importet. Finally I switched back to version 3.4.1, and ... it works again!
Possibly I am doing something wrong?? Possibly it is a bug? Any suggestions are welcome.
Thanks and regards, Mike.

I'm running Windows 7, 64-bit and having the same trouble right now. The collection is an auto generated collection.

Assertion Failed! error when trying to install

I've been trying to get World of Warcraft on my iBook since I bought it in late August, and after just now using a different set of disks I'm convinced that I have a hardware problem. On the same disk (on both copies) I get the error:
Assertion Failed!
(unknown)
\<Path Name>\Installer Tome3.mpq:1576
I also get this same error on one of the disks in the 2nd set, albiet with a different path, but the same ":1576" suffix. Has anyone else encountered this with different software? Office installed fine, but I don't have any other Mac software to attempt to install.

I was able to proceed with the installation and have installed Oracle BI EE on my PC. However, there is no oc4j.jar in my oc4j_bi/j2ee/home directory so am unable to proceed in starting the oc4j server. How can I go about that ?

Forms Error .. Assertion failed

Hi Forms are working
OS-Win 2003
Oracle 10g appl.
Error:
Assertion Failed
Program:F\Oracle\OraHomeFR\bin\ifweb90.exe
File:c:\myade\9i2\src\jx\ixfs.c
Line:75
Expression: window != (ixobj*)0
ABORT/RETRY/IGNORE
Click ignore and it won't be there
Did anyone face similar problem. Is it some problem with the service running.
Thanks in advance
MG

Hi,
We too have this problem in Oracle 10gAS Rel 2 Forms over windows 2003 platform. Any solution or workaround to this?
Thanks.
Best Regards,
Sriram.

Error message on opening "assertion failed" what do I do?

The program started working normally but when I was in the middle of adding pictures to a catalogue and creating smart images I accidentally switched light room off and since then I cannot switch it back on. I get the error message "assertion failed" when I click on the icon to open light room. I tried uninstalling and reinstalling the program that had no effect. I then used to ccleaner to clean the registry in case there were errors that are I reinstalled the program to no avail. I phoned geek squad they took over my computer and try to discover what the error was without success. What do I do?

Have you tried this?
Error: 'assertion failed' | Update | Windows
there might also be something here
How to fix Adobe Lightroom 5.4 assertion failed error

SWPM - System Copy - Assertion Failed Unable to load database

Hello again,
(already the next question form me, sorry for this
I am executing a sysetm copy (DB-refresh) on ASE using SWPM.
However, in "Configure Components" step I get the error: Assertion failed. Unable to load database <SID of Target Sysetm>.
Where else can I check for errors?
I think it is still something on which I already worked (with other thread).
In sapinst_dev.log I found this
TRACE 2015-03-25 11:05:00.320
SAPInst calls the LogInquirer. The output of the LogInquirer can be found in file sapinst_loginquirer.log.
TRACE 2015-03-25 11:05:06.122 [iaxxgenimp.cpp:638]
 CGuiEngineImp::showMessageBox()
<html> <head> </head> <body> An error occurred while processing option SAP Enhancement Package 1 for SAP N
etWeaver 7.3 > SAP ASE > System Copy > Target System > Standard System > Based on AS ABAP > Database Refresh or M
ove( Last error reported by the step: Assertion failed: Unable to load database <SID>.). You can now: <ul>
<li> Choose Retry to repeat the current step. </li> <li> Choose Log Files to get more inform
ation about the error. </li> <li> Stop the option and continue later. </li> </ul> Log files are written to /t
mp/sapinst_instdir/NW731/SYB/COPY/SYSTEM/STD/AS-ABAP/REF. </body></html>
TRACE 2015-03-25 11:05:06.124 [iaxxgenimp.cpp:1031]
 CGuiEngineImp::acceptAnswerForBlockingRequest
Waiting for an answer from GUI
In sapinst.log I found this:
ERROR 2015-03-25 11:04:59.573
FCO-00011 The step syb_step_setup_preload with step key |NW_ABAP_DB_DBRefresh|ind|ind|ind|ind|0|0|NW_ABAP_DB|ind
|ind|ind|ind|0|0|NW_CreateDBandLoad|ind|ind|ind|ind|createdbandload|0|NW_CreateDB|ind|ind|ind|ind|createdb|0|NW_S
YB_DB|ind|ind|ind|ind|SYB_DB_CONTEXT|0|syb_step_setup_preload was executed with status ERROR ( Last error reporte
d by the step: Assertion failed: Unable to load database <SID>.).
INFO 2015-03-25 11:04:59.772
Creating file /tmp/sapinst_instdir/NW731/SYB/COPY/SYSTEM/STD/AS-ABAP/REF/__instana_tmp.xml.
INFO 2015-03-25 11:05:00.307
Removed file /tmp/sapinst_instdir/NW731/SYB/COPY/SYSTEM/STD/AS-ABAP/REF/instslana.xml.
INFO 2015-03-25 11:05:00.308
Creating file /tmp/sapinst_instdir/NW731/SYB/COPY/SYSTEM/STD/AS-ABAP/REF/instslana.xml.

Hello Kiran,
I did a few tests again yesterday, and it was really a stupid mistake from myside.
The error message did mean, that there wasn't enough space.
It isn't the authority issue, it was a leak of space.
FYI, the complete DB-Size of Source System is required - NOT JUST RESERVED SPACE!!!
Thx for help and sorry for stealing your time :O

Error assertion failed

Similar Messages

Maybe you are looking for