Error Assign site

Hello Guys,
I have a problem with CRM Mobile, when i have assigned site to Mobile, i have the next error "Error 1211: unable to save the site detaisl in the mobile client.
Can you help me,please ?
Thank you.

Hello Carlos,
You may check if the HKLM/SOFTWARE/SAP/MSA/MW/USER KEY in registry has the correct IDES DSN values. Also check the OBDC settings for IDES and verify if this query returns you the same machine name where you've your IDES installed :
select * from sys.sysservers

Similar Messages

How do I change the assigned site code on a REMOTE client via WMI (C#)?

Hi
I was wondering if it is possible to change the site code on a client remotely via WMI. I have found one or two links to this, eg
http://msdn.microsoft.com/en-us/library/jj874135.aspx
and
http://social.technet.microsoft.com/Forums/systemcenter/en-US/67b671bb-4819-4e7a-a4f6-6cb7ded17722/sccm-2007-change-assigned-site-code-on-clients?forum=configmgrgeneral
However none of these will allow me to change it remotely directly from my machine. I have written a tool which fixes many issues but having difficulty with this one. In the past I have even resorted to copying a script remotely to an affected machine then
setting a remote scheduled task which executes the script. This was effective but very dirty! I find it difficult to believe there is no way to do this directly but can't seem to find anything suggesting it is possible.
Before anyone replies with a 'what are you trying to achieve...' type answer, I have a similar situation to that of the guy in the second link but I would like something more instant.
Many thanks

psexec or winrm will allow you to do this.
Jason | http://blog.configmgrftw.com

Mysite Error - The site does not contain a default keywords termstore

I know this error has to do with the Managed Metadata Service. I recently had to delete my User Profile Service and Search Service, and then recreate new ones. Do I need to connect them to the existing Managed Metadata Service somehow?
I get this error when trying to change certain user profile columns in Mysites.

Go to the list of shared services in Central admin, highlight the Managed Metadata Service Proxy and select the properties button from the Ribbon. You'll see four checkboxes. Make sure the one labeled 'This service application is the default
storage location for Keywords' is checked. Depending on the order of installation of services or if the Managed Metadata service is deleted and recreated this sometimes doesn't happen.
http://social.technet.microsoft.com/Forums/en-US/3cba2f1a-c1c7-4aed-b46e-6247f6a14e88/after-setting-everything-up-successfully-error-the-site-does-not-contain-a-default-keywords?forum=sharepointadminlegacy
http://technet.microsoft.com/en-us/library/gg750250%28v=office.14%29.aspx
http://donalconlon.wordpress.com/2010/06/30/managed-metadata-setting-the-default-termstore/
http://www.deliveron.com/blog/post/Define-the-default-Term-store-for-New-keywords-in-SharePoint-2010.aspx

Server was unable to process request. --- ERROR: This site is not hosted on this data center C#

I am working with the API for the first time, and I am currently trying to figure out how to pull a list of products from a cat using the Product_ListRetrieve, I keep getting this error
Server was unable to process request. ---> ERROR: This site is not hosted on this data center

Okay so if anyone else is having these issues I found an answer for MVC3 C#:
Go into the Web Config and look at the Application Settings, by editing the URL there you can find a value containing the service url. add the subdomain there:
Example-
<applicationSettings>
    <ITCatExtend.Properties.Settings>
      <setting name="ITCatExtend_CRM_CatalystCRMWebservice" serializeAs="String">
        <value>https://Add the Sub Domain Here.worldsecuresystems.com/CatalystWebService/CatalystCRMWebservice.asmx</value>
      </setting>
      <setting name="ITCatExtend_Ecom_CatalystEcommerceWebservice"
        serializeAs="String">
        <value>https://Add the Sub Domain Here.worldsecuresystems.com/catalystwebservice/catalystecommercewebservice.asmx</value>
      </setting>
    </ITCatExtend.Properties.Settings>
</applicationSettings>

ERROR: This site is currently unavailable.

I receive this message when I try to upload my site to Adobe Business Catalyst I signed up for the monthly subscription with one free hosting site. So is my site hosting still ABC?
Not sure what's happening since my trail version stopped.
ERROR: This site is currently unavailable. For more information please contact: muse. what phone number do I use to contact Muse........ The support team at Adobe don't seem to know any answers.. I have been on the phone for hours and keep getting pasted from one person to the other...Here's what i want to do... design in Muse host in ABC, (hosting 5 sites) I have an adobe ID. I'v paid for Muse and hosting of one site....
Hope someone can help!!!

these are the messages i get. It's only giving me the option for a new site...but this is not a new site.....it's the same site that i had with the trail version......I did change from a pc to a mac... my site was palestine http://palestine21.businesscatalyst.com/

Runtime error : Assignment to context failed (context overflow)

Hi experts,
     I am getting the following error..
   Runtime error : Assignment to context failed (context overflow). I also tried increasing maxctxtsize from 1677216 to 5242880 and also to 10485760 but no luck.
     Any help would be appreciated..
thanks,
rao

Hi Rao,
the default value for the maximum context size is 5242880 so if you increased a value from 1677216 I assume you picked the wrong value, the right one is programs/agate/MaxCtxtSize (make sure you change the right instance).
If this still not helps may be your response container is to small or the 10MB are still too small.
Please keep in mind that when you increase containers you take a lot of address space from the process since this container is created for each workthread and you may end up with a full address space (on 32 bit platforms). So when increasing the container sizes you may have to reduce the number of workthreads (and increase the number of processes to handle the same load as before).
HTH
Ralph

ERROR: replicator: Job Failed :error retrieving site manifest exception

Hi all,
I have installed the Site Studio Publishing utility on content Server machine.
I have installed the site studio publishing client on my machine and I have configured successfully. I mean to say that I have configured the destination on Publishing Utility & Content Provider on Publishing Client.
I have created the publishing job on the the site. I could see the content delivered on my machine from the content server, successfully. Now i have updated the site in the Site designer. I have just added "Hi" in the site layout page in the site designer. I have saved it. Now I have given the publishing job again. While running the job, I am getting following Error:
WARNING: replicator: 401 response received from server
[Sep 13 18:11:49] ERROR: replicator: Job Failed :error retrieving site manifest exception:
com.kinecta.net.HttpIOException: HTTP 401 error received from server :http://10.16.21.124/idc/idcplg?IdcService=SS_GET_SITE_PUBLISH_REPORT&siteId=TestSite
     at com.kinecta.replicator.SiteCrawler.openConnection(SiteCrawler.java:515)
     at com.kinecta.replicator.SiteCrawler.openConnection(SiteCrawler.java:191)
     at SiCloneSyndicator.SiCloneSiteStudioPackageGenerator.getSiteManifest(SiCloneSiteStudioPackageGenerator.java:452)
     at SiCloneSyndicator.SiCloneSiteStudioPackageGenerator.onReplicationStart(SiCloneSiteStudioPackageGenerator.java:342)
     at SiClone.SiCloneSiteReplicator.run(SiCloneSiteReplicator.java:534)
     at SiClone.SiCloneIcePackageGenerator.run(SiCloneIcePackageGenerator.java:39)
     at SiClone.SiCloneSiteReplicatorRunner.runJob(SiCloneSiteReplicatorRunner.java:308)
     at SiClone.SiCloneSiteReplicatorRunner.run(SiCloneSiteReplicatorRunner.java:178)
     at SiCloneSyndicator.SiCloneGenerator.doUpdate(SiCloneGenerator.java:516)
     at SiCloneSyndicator.SiCloneGenerator$1.run(SiCloneGenerator.java:472)
First of all, May i ask you a question: What is the site manifest file?
Any help would be much appriciated.
Regards & thanks,
Nirmala Vijaya Sekhar varre

Hi Sreenath,
I am getting following error while publishing the microsite using Site Studio Publisher even I unchecked "Treat home page errors as critical" and "Treat manifest errors as critical" options, here is the log:
INFO 2012-02-14 07:35:11,794 - ----- Running Job
INFO 2012-02-14 07:35:11,794 - Output Path : /opt/ora/ucmdev/Middleware/domains/UCMDevDomain/ucm/cs/data/SiteStudioPublisher/output/MyBiopsy
INFO 2012-02-14 07:35:11,794 - Authentication : BasicAuth
INFO 2012-02-14 07:35:11,794 - Use Cache Control : false
INFO 2012-02-14 07:35:11,794 - Publish Now : false
INFO 2012-02-14 07:35:11,794 - Force Analyze : false
INFO 2012-02-14 07:35:11,794 - Force Download : false
INFO 2012-02-14 07:35:11,794 - Use LastModified : true
INFO 2012-02-14 07:35:11,794 - Use SSPETag : true
INFO 2012-02-14 07:35:11,794 - Treat home page errors as critical : true
INFO 2012-02-14 07:35:11,794 - Treat manifest errors as critical : true
INFO 2012-02-14 07:35:11,794 - Soft Error Threshold : 99
INFO 2012-02-14 07:35:11,794 - Soft Error Codes : 403,404
INFO 2012-02-14 07:35:11,794 - Hard Error Threshold : 99
INFO 2012-02-14 07:35:11,794 - Hard Error Codes : 501,502
INFO 2012-02-14 07:35:11,794 - Delete Threshold : -1
INFO 2012-02-14 07:35:11,794 - Friendly Url Parameters :
INFO 2012-02-14 07:35:11,794 - Dynamic Url Parameters :
INFO 2012-02-14 07:35:11,794 - Default Filename : index.html
INFO 2012-02-14 07:35:11,794 - Page Extension : html
INFO 2012-02-14 07:35:11,795 - ----- Connecting: http://dappucm07.cap.org:16200/cs/idcplg?IdcService=SS_GET_PAGE&siteId=MyBiopsy
INFO 2012-02-14 07:35:11,802 - Response: 301 Moved Permanently
INFO 2012-02-14 07:35:11,802 - http redirect found:http://dappucm07.cap.org:16200/MyBiopsy/index.html
FATAL 2012-02-14 07:35:11,840 - sitestudiopublisher.net.IOFailureException: error retrieving site manifest
INFO 2012-02-14 07:35:11,840 - Error threshold exceeded
INFO 2012-02-14 07:35:11,840 - Finishing...
INFO 2012-02-14 07:35:11,840 - ----- Job Summary
INFO 2012-02-14 07:35:11,840 - Source URL : http://dappucm07.cap.org:16200
INFO 2012-02-14 07:35:11,840 - Start time : Tue Feb 14 07:35:11 CST 2012
INFO 2012-02-14 07:35:11,840 - End time : Tue Feb 14 07:35:11 CST 2012
INFO 2012-02-14 07:35:11,840 - Duration : 0 hours 0 minutes 0 seconds 46 milliseconds
INFO 2012-02-14 07:35:11,840 - Connect Time : 0:00:00.046
INFO 2012-02-14 07:35:11,840 - ----- Links Summary
INFO 2012-02-14 07:35:11,840 - Total : 0
INFO 2012-02-14 07:35:11,840 - Modified : 0
INFO 2012-02-14 07:35:11,840 - Added : 0
INFO 2012-02-14 07:35:11,840 - Deleted : 0
INFO 2012-02-14 07:35:11,840 - Examined : 0
INFO 2012-02-14 07:35:11,840 - Redirected : 0
INFO 2012-02-14 07:35:11,840 - Downloaded : 0
INFO 2012-02-14 07:35:11,840 - Not Found : 0
INFO 2012-02-14 07:35:11,840 - ----- Job Failed
INFO 2012-02-14 07:35:11,840 -

FWTR056 Error assigning update type to flow type 1200, sign -

Hi
we have defined a monymarket product type 530 ("Repo") with Transaction Type 200 (Liablity) and 100 (Asset). This works fine.
Now, the current market situation requires negative interests for Transaction Type 200:
Example:
First Cashflow: +1M
Final Repayment: -1M
Interest: +Interest (Sign!)
So, we get the interest Cashflow at the end.
I have assigned the Condition 1200 used for TransactionType 100 also to ConditionType 200.
After using FTR_CREATE for Producttype=530 and TransactionType=200, I can correctly choose between the 2 Conditions 1200 and 1205.
But: after choosing 1200, the cashflow is shown negativ (althow I have assigned Direction "+" when assigning flowtype to update type 1200)
Also: when I try to save the deal, I get "FWTR056: Error assigning update type to flow type 1120, sign +, contract type 5"
Any ideas how to solve this or to define negative interests? It really should be an interest cashflow, not an "other flow".
Regards, Cornel

Here the Response from SAP (in german): negative Interests are not possible (or only by using a workaround..)
04.08.2011 - 16:53:16 CET - Antwort von SAP
Sehr geehrte Damen und Herren,
im Standard ist die Berechnung mit negativen Zinsen aus technischen
Gründen nicht möglich.
Leider kann die Funktionalität nicht im Rahmen des Supports erweitert
werden, somit muss ich Sie mit Hinweis 11 vertrösten.
Eventuell könnten Sie es mit einem Workaround probieren:
1. Temporär die entsprechenden Positiv-Beträge für Zinsen
nutzen, aber die Kontierungen umdrehen (das wäre aber umständlich
und würde für Zinskapitalisierung nicht gehen),
2. oder die Geschäft mit einer variablen Zinsenreferenz anlegen und
dann die Konditionen für die betroffenen Perioden mit einem
passenden Abschlag (Spread) erzeugen,
3. oder eben negative Zinsen als Null-Zinsen erzeugen und für diese
Perioden Bewegungen manuell anlegen (als Zusatzbewegungen).
Ich kann Ihnen hier leider keine positivere Antwort geben.
Mit freundlichen Grüßen,
XY
FIN Senior Support Consultant
AGS Primary Support, Business Suite & Technology
SAP AG

Installation outlooksoft error: Assigning COM+ Components: Error

All,
i am roger.
I have installed one Outlooksoft Server on windows server2003 with MS SQL2005, after installation, when i do server diagnostic, the error occurs, at COM+ Component service entry, it says Osoftdatabase user , assiged error, status error, meanwhile, i found the errors "Assigning COM+ Components: Error" at osoft installation logs. How to correct this errors?
in addition, when i want to install BPC for office installation or BPC for administation installation from software centers, at the last step, it display," installation incomplete
-this screen is customizable by customer-,if you need help ,please contact your system administrator."
what to do next to solve this problem,
could you give us advice?
thanks in advance.

Hi Roger,
Is this a single server installation that you are referring to? or is this a multi-server installation. Did the error you receive during the diagnostic occur at the Assigned, Identity, Activation Type, Authentication Level area?
To me right now this sounds like what happened could potentially be that during the installation you by accident entered the second or third password in the installation incorrectly. There is a bug in the install that only checks the validity of the first password entered and not the second nor the third.
Regarding the BPC for Office Error I would focus first on getting the server installation fixed before moving on to the next step.
Let me know
1) Where the error occurs during the diagnostic
2) if you are able to login to MS SQL 2005 with the user and password that you entered during the installation.
Cheers,
Scott

Error creating site collection - Could not load file or assembly 'Microsoft.ApplicationServer.Caching.Core, Version=1.0.0.0

Hi,
When creating a Site collection using Central admin, i am getting the error "One or more types failed to load. Please refer to the upgrade log for more details." . Microsoft.ApplicationServer.Caching.Core dll version on my machine is 1.0.4632 (App
Fabric 1.1).
Stack Trace
SharePoint Foundation Upgrade SPSiteWssSequence ajywy ERROR Exception: Could not load file or assembly 'Microsoft.ApplicationServer.Caching.Core, Version=1.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The system cannot
find the file specified. dd64ad9c-0f90-e07d-aaaa-13533e0e9e4f
Thanks,
Thomas

Hi Thomas,
According to your description, my understanding is that you got an error when you created a site collection in SharePoint 2013.
I found a similar thread with yours, maybe it also was created by you. Anyway ,in the thread, the workaround is Changing the virtual directory web config of CA (Option 1 and 2 mentioned at
http://technet.microsoft.com/en-us/library/dn473937.aspx ) and it worked.
More information, please take a look at:
http://sharepoint.stackexchange.com/questions/111439/error-creating-site-collection-could-not-load-file-or-assembly-microsoft-appl
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support

JOLT_CAT:1083: "ERROR: Error assigning connection request, can't create any more handlers"

We are trying to connect a WebLogic Application server through Jolt to Tuxedo.
We have the our MAXWSCLIENTS=100, and are trying to create a single connection
pool through WebLogic. The errors reported in the logs are:
121813.nprkscope01!JRAD.6155.1.0: GP_CAT:1569: ERROR: Unable to lock network mutex
-1 at 95
121813.nprkscope01!JRAD.6155.1.0: JRAD_CAT:1526: INFO: JRLY connection is UP
121813.nprkscope01!JSL.6151.1.0: JOLT_CAT:1083: "ERROR: Error assigning connection
request, can't create any more handlers"
121814.nprkscope01!JSL.6151.1.0: JOLT_CAT:1083: "ERROR: Error assigning connection
request, can't create any more handlers"
I have attached the configuration file we are using. Any advice would be appreciated.
Thanks
[ubbsimple]

Hi,
I am running Netweaver 7 and ERP2005.
J2EE support pack is 9. The sap note that you mentioned is for NW2004 and our system is running on NW2004s.
Now I am trying to reconfigure the sld. In case if you can suggest me another solution, I will be very happy to try that out...
Thanks for your reply
Edited by: Rakesh Bothra on Apr 20, 2011 4:23 AM

BDoc Error : Assignment of usage AD_DEFAULT to communication type TEL not

Hi ,
I got the below BDoc error with BDoc type : VEND_MAIN
Error : Assignment of usage AD_DEFAULT to communication type TEL not unique
Thanks

We had a similiar issue with pushing vendors from R/3 > SNC. I took all the entries out of but020 then used those address numbers to get a list of all the values in ADRCOMC. In ADRCOMC there was a single entry whose HIGH_VALUE was 999 and that was causing the issue. I went into the BP and manually deleted the Telephone & Email address of the BP then saved it. I then went back in and re-created the tele & email address for the BP and that fixed he sequence error.
We have several other BP's that have an usually high consnumber and I'm not sure why. Most of our BP have a connumber of 001, 002, 003,,, etc, howver there are some that have skipped a lot of numbers and gone straight from 12, 13, 991, 992. This last example is what happened with our problem BP record.
After I manually changed the data I was able to process the inbound CIF.
I hope this helps.
Will Foster

Cannot setup Blackberry Internet Mail - get error: The site cannot be accessed in this manner.

I am trying to setup email on my Blackberry, when i load the link I get error:
The site cannot be accessed in this manner. Please use the URL or link provided to you by your service provider.
Please help..
Cathy

I'm not sure why that is not working for you.
North American Carriers - scroll down to select your carrier and login.
WorldWide Carriers - Find your carrier on the list
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Error 14101 SITs Listen TCP.vi

Hi
Today I got a very strange error when I load Matlab, or when I opened a vi with a matlab script. The error is coded as Error 14101 SITs Listen TCP.vi An says this is an unwired error. What is this all about? I do have the matscript updated to version 7.0.0.2 so I guess this is not the problem.

Hi,
The reason for this error is that the SIT Server is failing to initialize.
Here are the possible causes:
1. Labview is unable to create a TCP listener on port 6011 (this may be caused if another app has occupied port 6011, or is blocked by the firewall)
Fix: close any apps using port 6011 or change settings in the firewall.
2. SIT Server failed to load some DLLs it is dependent on. The installer typically adds to the PATH environment variable directories where those DLLs are located.
The DLLs and their default locations are listed below:
MatlabFunc.dll (SIT DLL in C:\Program Files\National Instruments\Shared\System)
libmx.dll, libmex.dll (MATLAB DLLs located in \bin\win32)
Fix: Add path to the DLLs to "Path" environment variable (On XP: Start>>Control Panel>>System>>Advanced and click Environment Variables)
Thanks
SumitG
NI R&D

Supplier conversion into R12 giving error at site level(AP_INVALID_TCA_ERR)

Hi All,
I am running "Supplier Sites Open Interface Import" for Supplier Site conversion but standard program is failing with the following error msg: "AP_INVALID_TCA_ERROR".
Can any one please help me how I can fix this issue. Any help will be Gold for me.
Best Regards,
Shaik.

Hi Hussein,
OS: Linux.
DataBase: Oracle 11g
Application is : Oracle R12.2
Below is the coucurrent request Log.
Payables: Version : 12.0.0
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
APXSSIMP module: Supplier Sites Open Interface Import
Current system time is 09-NOV-2010 02:48:40
+-----------------------------
| Starting concurrent program execution...
+-----------------------------
Arguments
P_WHAT_TO_IMPORT='ALL'
P_COMMIT_SIZE='50000'
P_PRINT_EXCEPTIONS='N'
P_DEBUG_SWITCH='Y'
P_TRACE_SWITCH='Y'
APPLLCSP Environment Variable set to :
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
American_America.AL32UTF8
Enter Password:
MSG-00001: After SRWINIT
MSG-00002: After Get_Company_Name
MSG-00003: After Get_NLS_Strings
MSG-00004: After Importing Suppliers
MSG-00005: After Get_Header_Information
MSG-00020: After SRWEXIT
Report Builder: Release 10.1.2.3.0 - Production on Tue Nov 9 02:48:43 2010
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Executing request completion options...
Output file size:
2369
------------- 1) PRINT   -------------
Printing output file.
Request ID : 1446582
Number of copies : 0
Printer : noprint
Finished executing request completion options.
Concurrent request completed successfully
Current system time is 09-NOV-2010 02:48:54
Best Regards,
Shaik

Error Assign site

Similar Messages

Maybe you are looking for