ERROR AT 1st step

hello experts,
i am getting the below error at the very 1st step of the process chain.
21.01.2011     00:15:20     NO_MORE_SPACE: Can not create MTE: no more space: no more MESSAGE_CONTAINER slots available     S     RSAR     51
please suggest what is the error and how to rectify the same

Hello,
To solve this issue, please check the below steps:
1. Enlarge the value of parameter "alert/MONI_SEGM_SIZE" according to
    SAP notes 135503 and 731165.
2. Please check the Parameter DAYS_TO_KEEP_LOGS in Tcode RZ21 and adjust
    it to a smaller value.
Methods => Method definitions => Display => Search method
RSPC_CCMS_AGENT (which is function module RSPC_CCMS_MA_UPDATE) =>
Doubleclick => Parameters => DAYS_TO_KEEP_LOGS
Best Regards
Barry

Similar Messages

  • HT204406 hi!!!! I keep getting an "error" when trying to activate my iTunes match. I get to the 1st step, then it gets stopped, and I get the error message. HELP!!!!!!

    hi!!!! I keep getting an "error" when trying to activate my iTunes match. I get to the 1st step, then it gets stopped, and I get the error message. HELP!!!!!!

    That's definitely enough to start.
    It sure seems like it should work...and then I saw that you're using a router. It could very well be that the router is the weak link here.
    Instead connecting to your network router, try using a direct USB connection from your MBP. If that doesn't work, you read this post, which may be relevant to your problem:
    http://h30434.www3.hp.com/t5/Mac-Printing-and-Scanning/Scanning-from-Mac-10-7-fa ils-after-all-recommendations-Not-ready/td-p/1287003
    It seems you're up to date with software. Post with your results.

  • HT204406 Itunes Match won't upload. I get error stating there was an error in the itunes store, please try again. I have tried again everyday for the last month and am still unable to use.  Any ideas on why Match can't complete the 1st step of the process

    Itunes Match won't upload. I get error stating there was an error in the itunes store, please try again. I have tried again everyday for the last month and am still unable to use.  Any ideas on why Match can't complete the 1st step of the process (Gathering information about your Itunes library)?

    JohnCullison wrote:
    For the last few weeks, the iTunes store has been displayed with empty graphic rectangles (with a blue box containing a white question mark centered in the rectangles), bits of text, and some buttons. The page extends quite a ways, including what I assume would be all the links to all the music...
    If all you are trying to do is buy music, you can easily buy MP3s at any online music download store (e.g. amazon.com) and add them to your iTunes library.

  • Getting same error message - 1st time ever having a problem witn iTunes.  Tried to re-install iTunes but that just got another error message.  Does this mean I have lost everything.

    Getting same error message - 1st time ever having a problem witn iTunes.  Tried to re-install iTunes but that just got another error message.  Does this mean I have lost everything.

    Have a look at the articles mentioned  here:http://support.apple.com/kb/TS3694
    Unknown Error containing "0xE" when restoring: To resolve this issue, follow the steps in iPhone, iPad, iPod touch: Unknown error containing '0xE' when connecting. If you have a Windows computer with an Intel® 5 series/3400 series chipset, you may need updates for your chipset drivers. See iTunes for Windows: Issues syncing iOS devices with P55 and related Intel Chipsets for more information.

  • Error in Fork Step causing issue in generating next work items

    All,
    We have ECC 6.0 with the following SP:
    SAP_BASIS     700     0012     SAPKB70012     SAP Basis Component
    SAP_ABA                     700     0012     SAPKA70012     Cross-Application Component
    I have this strange issue. In one of my custom workflows, i am using a Fork step with 02/ 02 necessary outcomes. In branch 1, i am sending a mail to a user's e-mail id. In branch 2, i have 3 activity steps for another user. Step 1 is to display an invoice and step 2 is a user decision to apprve/deny this invoice.
    I know that during runtime, at the Fork step, the work item for branch 1 and the 1st work item for activity step 1 in branch 2 get generated almost simultaneously(though with some small time difference). This is OK. But the issue is, when the sendmail in branch 1 errors out due to some error, and when step 1 is finished successfully by another user, the work item for 2nd activity step in branch 2 is not getting created.
    As i understand, in the Fork, the 2 branches, execution should be independent of each other, that means, the work item creation and execution of branch 1 and 3 steps in branch 2 should be happening independently. But, this doesn't seem to be the case.
    I understand when the sendmail in branch failed, the wflow is set to 'Error' Status.But there is already an open workitem for step 1 of branch 2. When this workitem is completed successfully, I expect the work item for 2nd step should get generated.But this is not happening. But, when i restart the whole workflow using SWPR, it generates the witem for 2nd step in branch 2. And still the wflow is in 'Error' status.
    When the user finishes the 2nd workitem of branch 2, the next work item for 3rd step is not getting generated. Instead i needed to restart the whole wflow again and this time, it generated the 3rd witem in ranch 2.
    To my understanding, when a Fork is there, if i specify 02/02 outcomes necessary, these 2 branches should go in parallel, both creation and execution of workitems, until they are joined. And at this point, if the whole Fork step is successful, then workflow will proceed further with steps below the Fork. Shouldn't this be the case ?
    Anybody had similar issue? Pl share your thoughts on this. I'd really appreciate if somebody can clarify whats going on in the above case and how to fix this.
    Thank you in advance
    Regards,
    venu
    Edited by: Venugopal Jogi on Jun 10, 2009 5:58 PM

    Hi Arghadip,
    Thanks for your reply. You said
    "When a Workflow goes into error the processing should stop whether it is in same branch or in different.".
    If this is correct, then as i explained earlier, when i restart the workflow without fixing the errored branch, then also, the next work item should not be created..Right ? But, it is. I didn't fix the errored branch but simply restarted the workflow. Then it created the witem for 2nd step, in the branch 2 that is not errored.
    How can this be, the branch 1 is still in ERROR status only. So, can you pl clarify if something else might be going on here.
    Also, fixing the issue is fine. But, the SendMail step in branch 1 is just an information only and per business requirement, this should not be holding up the approval process. And if we don't process the invoice in time, just because of some informational mail errored out, this will not be a feasible solution to the client,Right ? That's the whole reason i am using Fork step, so that they both proceed parallelly (independently).
    If step 1 is a pre-requisite for step 2, then it makes sense to fix error in step 1 so that we can proceed with step 2.
    Any other thoughts on this.....
    Regards,
    venu

  • Debug error: Errors while executing step

    Hi gurus:
    While debugging a complex mapping, I received the following error.
    DEPENDENCY: EXPR executing...
    Errors while executing step
    DEBUG INPUT ROW: 1
    TABLE: DBG$ID2_MTL_SYSTEM_ITEM_B_GR
    STATEMENT: TRACE177:TRACE180:
    "GE_8_SY"
    ("DBG$ID2_MTL_SYSTEM_ITEM_B_GR_I$1"):=
    ""DW_PG".GET_COURSE("MT_1_IN$2"
    ("DBG$ID2_MTL_SYSTEM_ITEM_B_GR_I$1"), "MT_2_OR$2"
    ("DBG$ID2_MTL_SYSTEM_ITEM_B_GR_I$1"), 'CATEGORIES', 5)/*ATTRIBUTE EXPR.OUTGRP1.ID2:EXPRESSION*/;
    ORA-29280: invalid directory path
    ORA-06512: at "SYS.UTL_FILE", line 41
    ORA-06512: at "SYS.UTL_FILE", line 478
    ORA-06512: at "DW_PKG", line 377
    ORA-06512: at "DW_PKG", line 3424
    ORA-01403: no data found
    As a background, the error occurred at EXPR step which is calling a function. Function calls additional tables in the source schema (tables not brought into Staging) I have imported the Package from the DB (Target) Do I need to do something special for the function to be able to access the tables in the source schema?
    Thanks in advance for your help.

    I ran into a similar problem about a year ago.  Very random, but kept happening at least once a week.  Finally figured out that the static IP address for our server was left in the dynamic IP address pool.  So every so often, the address was dynamically assigned to a second machine.  Which caused a similar type of problem that you are seeing.  I don't know if this is your problem.  But it sounds familiar.
    Hope it helps.
    Mike

  • BPM Collect Pattern: N:1 Mapping error in trnsformation step

    Dear All,
    I am using collect pattern Payload Dependant.
    I have one source data type and one target data type. Mapping is one to one.
    Data type contains 3 fields, Value Name and Surname.
    In Loop I have used condition when Counter is equal to value stop the loop.
    I have used Transformation step as I am using N:1 mapping.
    I have used abastrct to abastract message mapping.
    Source message is 0 to unbounded.
    In interface mapping target message occourance is 1. But in mapping program target message occourance is 0 to unbounded.
    When I am running my scenario, Third party to IP is working fine. But in IP i am getting error in transformation step.
    "com.sap.aii.utilxi.misc.api.BaseRuntimeException: RuntimeException in Message-Mapping transformation: Cannot produce target element /ns0:Messages/ns0:Message1/ns1:Collect_Receiver_MT. Check xml instance is valid for source xsd and target-field mapping fulfills requirements of target xsd at com.sap.aii.mappingtool.tf3.AMappingProgram.start"
    Can anybody will help me to solve this problem?
    Warm Regards,
    Gouri

    Have a look
    http://help.sap.com/saphelp_nw04/helpdata/en/de/766840bf0cbf49e10000000a1550b0/content.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/cb/15163ff8519a06e10000000a114084/content.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/08/16163ff8519a06e10000000a114084/content.htm
    /people/sudharshan.aravamudan/blog/2005/12/01/illustration-of-multi-mapping-and-message-split-using-bpm-in-sap-exchange-infrastructure
    /people/kannan.kailas/blog/2005/12/07/posting-multiple-idocs-with-acknowledgement
    Also have a look at these seminars,
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/media/uuid/daea5871-0701-0010-12aa-c3a0c6d54e02
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/media/uuid/e8515171-0701-0010-be98-e37bec4706cc
    Thanks

  • Error in 29 step of SAP Netweaver 4.0 Portal for java on windown7 ultimate.

    Dear All,
    Im facing problem while installing "SAP Netweaver Portal Server 4.0" for java on my OS "windows7 ultimate" laptop.
    Im getting error in 29th step while configuring J2EE engine. Can someone help, i will be highly obliged.
    INFO 2010-01-27 18:56:04
    Execute step runBatchconfig of component |NW_Java_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_CI_Instance_Configure_Java|ind|ind|ind|ind|3|0.
    INFO 2010-01-27 18:56:11
    Removing file C:\Program Files\sapinst_instdir\NW04S\SNEAK_PREVIEW\FULL\INSTALL\batchconfig.properties.
    INFO 2010-01-27 18:56:11
    Creating file C:\Program Files\sapinst_instdir\NW04S\SNEAK_PREVIEW\FULL\INSTALL\batchconfig.properties.
    WARNING 2010-01-27 18:56:11
    Error 234 (More data is available.
    ) in execution of a 'RegEnumValue' function, line (377), with parameter ().
    ERROR 2010-01-27 18:56:11
    MUT-03001  Value of type HKeyClass has illegal value '0'.
    WARNING 2010-01-27 18:56:11
    System call failed. Error 1307 (This security ID may not be assigned as the owner of this object.
    ) in execution of system call 'SetTokenInformation' with parameter (TokenOwner, Administrators), line (855) in file (synxccuren.cpp).
    INFO 2010-01-27 18:56:11
    Switched to user: j2eadm.
    INFO 2010-01-27 18:56:11
    Creating file C:\Program Files\sapinst_instdir\NW04S\SNEAK_PREVIEW\FULL\INSTALL\batchXmlGen.log.
    WARNING 2010-01-27 18:56:11
    System call failed. Error 1307 (This security ID may not be assigned as the owner of this object.
    ) in execution of system call 'SetTokenInformation' with parameter (TokenOwner, Administrators), line (855) in file (synxccuren.cpp).
    INFO 2010-01-27 18:56:11
    Switched to user: j2eadm.
    INFO 2010-01-27 18:56:11
    Working directory changed to C:\Program Files\sapinst_instdir\NW04S\SNEAK_PREVIEW\FULL\INSTALL.
    INFO 2010-01-27 18:56:11
    Output of C:\j2sdk1.4.2_09\bin\java.exe -classpath "C:/Program Files/sapinst_instdir/NW04S/SNEAK_PREVIEW/FULL/INSTALL/install/sharedlib/launcher.jar" -Xmx256m com.sap.engine.offline.OfflineToolStart com.sap.engine.configtool.batch.xmlgenerator.ConfigXmlGenerator "
    Akhilesh-PC/sapmnt/J2E/SYS/global/security/lib/tools/iaik_jce.jar;
    Akhilesh-PC/sapmnt/J2E/SYS/global/security/lib/tools/iaik_jsse.jar;
    Akhilesh-PC/sapmnt/J2E/SYS/global/security/lib/tools/iaik_smime.jar;
    Akhilesh-PC/sapmnt/J2E/SYS/global/security/lib/tools/iaik_ssl.jar;
    Akhilesh-PC/sapmnt/J2E/SYS/global/security/lib/tools/w3c_http.jar;C:/Program Files/sapinst_instdir/NW04S/SNEAK_PREVIEW/FULL/INSTALL/install/lib;C:/Program Files/sapinst_instdir/NW04S/SNEAK_PREVIEW/FULL/INSTALL/install/sharedlib;C:\sapdb\programs\runtime\jar\sapdbc.jar" "C:/Program Files/sapinst_instdir/NW04S/SNEAK_PREVIEW/FULL/INSTALL/batchconfig.properties" -short is written to the logfile batchXmlGen.log.
    INFO 2010-01-27 18:56:12
    Execution of the command "C:\j2sdk1.4.2_09\bin\java.exe -classpath "C:/Program Files/sapinst_instdir/NW04S/SNEAK_PREVIEW/FULL/INSTALL/install/sharedlib/launcher.jar" -Xmx256m com.sap.engine.offline.OfflineToolStart com.sap.engine.configtool.batch.xmlgenerator.ConfigXmlGenerator "
    Akhilesh-PC/sapmnt/J2E/SYS/global/security/lib/tools/iaik_jce.jar;
    Akhilesh-PC/sapmnt/J2E/SYS/global/security/lib/tools/iaik_jsse.jar;
    Akhilesh-PC/sapmnt/J2E/SYS/global/security/lib/tools/iaik_smime.jar;
    Akhilesh-PC/sapmnt/J2E/SYS/global/security/lib/tools/iaik_ssl.jar;
    Akhilesh-PC/sapmnt/J2E/SYS/global/security/lib/tools/w3c_http.jar;C:/Program Files/sapinst_instdir/NW04S/SNEAK_PREVIEW/FULL/INSTALL/install/lib;C:/Program Files/sapinst_instdir/NW04S/SNEAK_PREVIEW/FULL/INSTALL/install/sharedlib;C:\sapdb\programs\runtime\jar\sapdbc.jar" "C:/Program Files/sapinst_instdir/NW04S/SNEAK_PREVIEW/FULL/INSTALL/batchconfig.properties" -short" finished with return code 0. Output:
    Warning : C:\sapdb\programs\runtime\jar\sapdbc.jar file stated but does not exist !
    SAP J2EE Engine Batch Config Xml Generator
    Batch Config Xml successfully generated to BatchConfig.xml
    INFO 2010-01-27 18:56:12
    Creating file C:\Program Files\sapinst_instdir\NW04S\SNEAK_PREVIEW\FULL\INSTALL\extractBootstrap.log.
    INFO 2010-01-27 18:56:12
    Output of C:\j2sdk1.4.2_09\bin\java.exe -classpath "C:/Program Files/sapinst_instdir/NW04S/SNEAK_PREVIEW/FULL/INSTALL/install/sharedlib/launcher.jar" -Xmx256m com.sap.engine.offline.OfflineToolStart com.sap.engine.configtool.batch.BatchConfig "
    Akhilesh-PC/sapmnt/J2E/SYS/global/security/lib/tools/iaik_jce.jar;
    Akhilesh-PC/sapmnt/J2E/SYS/global/security/lib/tools/iaik_jsse.jar;
    Akhilesh-PC/sapmnt/J2E/SYS/global/security/lib/tools/iaik_smime.jar;
    Akhilesh-PC/sapmnt/J2E/SYS/global/security/lib/tools/iaik_ssl.jar;
    Akhilesh-PC/sapmnt/J2E/SYS/global/security/lib/tools/w3c_http.jar;C:/Program Files/sapinst_instdir/NW04S/SNEAK_PREVIEW/FULL/INSTALL/install/lib;C:/Program Files/sapinst_instdir/NW04S/SNEAK_PREVIEW/FULL/INSTALL/install/sharedlib;C:\sapdb\programs\runtime\jar\sapdbc.jar" "C:/Program Files/sapinst_instdir/NW04S/SNEAK_PREVIEW/FULL/INSTALL/BatchConfig.xml" is written to the logfile extractBootstrap.log.
    WARNING 2010-01-27 18:56:14
    Execution of the command "C:\j2sdk1.4.2_09\bin\java.exe -classpath "C:/Program Files/sapinst_instdir/NW04S/SNEAK_PREVIEW/FULL/INSTALL/install/sharedlib/launcher.jar" -Xmx256m com.sap.engine.offline.OfflineToolStart com.sap.engine.configtool.batch.BatchConfig "
    Akhilesh-PC/sapmnt/J2E/SYS/global/security/lib/tools/iaik_jce.jar;
    Akhilesh-PC/sapmnt/J2E/SYS/global/security/lib/tools/iaik_jsse.jar;
    Akhilesh-PC/sapmnt/J2E/SYS/global/security/lib/tools/iaik_smime.jar;
    Akhilesh-PC/sapmnt/J2E/SYS/global/security/lib/tools/iaik_ssl.jar;
    Akhilesh-PC/sapmnt/J2E/SYS/global/security/lib/tools/w3c_http.jar;C:/Program Files/sapinst_instdir/NW04S/SNEAK_PREVIEW/FULL/INSTALL/install/lib;C:/Program Files/sapinst_instdir/NW04S/SNEAK_PREVIEW/FULL/INSTALL/install/sharedlib;C:\sapdb\programs\runtime\jar\sapdbc.jar" "C:/Program Files/sapinst_instdir/NW04S/SNEAK_PREVIEW/FULL/INSTALL/BatchConfig.xml"" finished with return code 31415. Output:
    PerfTimes : loadNativeLayer: loading jperflib failed. no jperflib in java.library.path
    Error while connecting to DB.
    ERROR 2010-01-27 18:56:14
    CJS-30059  J2EE Engine configuration error.<br>DIAGNOSIS: Error when configuring J2EE Engine. See output of logfile extractBootstrap.log: '
    PerfTimes : loadNativeLayer: loading jperflib failed. no jperflib in java.library.path
    Error while connecting to DB.
    ERROR 2010-01-27 18:56:14
    FCO-00011  The step runBatchconfig with step key |NW_Java_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_CI_Instance_Configure_Java|ind|ind|ind|ind|3|0|runBatchconfig was executed with status ERROR .

    Dear All, Kindly see the log of extractbootstrap.log ...
    PerfTimes : loadNativeLayer: loading jperflib failed. no jperflib in java.library.path
    Error while connecting to DB.
    thx waiting for response.
    Akhilesh

  • Two step confirmation with RF device (Mobile Data Entry) - 1st step only

    Hello
    I want to implement the following scenario:
    - WM transfer orders are created, relevant for two step confirmation;
    - a user working with RF device confirms the 1st step - picking;
    - then the materials are transported physically to another building (the same warehouse number);
    - another user working with RF device confirms the 2nd step - putaway.
    For confirming the 1st step I tried to use standard transaction LM07. Confirmation of the 1st step is working fine but right after that a screen for confirming the 2nd step is displayed to the user. I would like this transaction to finish just after confirming the 1st step and not to proceed with the 2nd step immediately - because the confirmation of the 2nd step should be done by another user (with some other transaction).
    What is more: if you exit the transaction manually after confirming the 1st step the system saves the TO number (in table LRF_WKQU) and in some circumstances triggers the screen for confirming the 2nd step even if you do not run LM07 - this is so called "recovery" function which is a nuisance in my case.
    So my question is: is there a way to customize LM07 so that it finished processing automatically right after confirming the 1st step for a two step confirmation TO ? (and without storing data for "recovery" function). Or maybe some other mobile-data-entry transaction should be used for that ?
    regards

    Hi Vlad,
    One more information, which i would like to communicate on this issue.
    We have raised OSS message to SAP on this issue. They have replied back that, on screen 1302, we have some custom code which is interfering with the system behavior.
    As of now, we have analyzed at our end, and we found that, the enhancement at screen 1302 is restricted for the functionality, and in theory, this enhancement should not be effecting at all the system behavior.
    SAP has suggested to test the scenario , without any enhancement on screen 1302.
    Still we are in discussion with SAP, and try to find out the resolution.
    Can you also check in your system, if you have any enhancement on screen 1302 ? And if yes, does it interfering with the stander SAP codes.
    Thanks & Regards,
    Raj.

  • Error in Block step in BPM.

    Hi all,
    I am getting the error in block step, my design follows like this i defined one transformation before block step, the transformation step will splits the input bunch of records into equal no of record packets and sent to block step.. while defining block step i used foreach mode, in block step we kept one sync send step which will send message and gets response ....
    but my block step is getting error once message enters into the block...
    Thanks in advance for your valuable  suggestions and solutions...
    Srinivas

    Hello...
    >>the transformation step will splits the input bunch of records into equal no of record packets and sent to block step
    The transformation splits the message into bunch.. Put  the output in a multiline container and use this in the block step...
    >>but my block step is getting error once message enters into the block...
    What error are you getting??
    >>Thanks in advance for your valuable suggestions and solutions...
    Great to know that you are happy with the responses from the community member in this forum.. So I wish to point one more thing here.. Some of the recent threads closed by you were having closing comment as solved.. it will be better if you point out the problem and the solution which you have adopted to solve the same, so that other community member having the same problem will get a speedy solution... This is just a suggetsion from my end...
    Thanks
    Suraj

  • Error in transformation step

    Hi all,
    In my requirement i have a BPM with the following steps
    start->Rx->Send<>Tranform>Send->end
    first send step is synchronous and it is sending req to a website and receiving response through http receiver channel.
    second send step is asynchronous , sending response received from website to a file server through file receiver channel.
    i have a transformation step ,where i am doing transformation between the structure in receive step and the structure in second send step,
    can i do that?
    can we do transformation between any async abstract structures that we define for BPM?
    BPM is showing error in transformation step, i dont know whats the error is and how to see the error and rectify the problem
    plz help
    regards
    jhansi

    <b>-Check the Transformation Step in BPM, weather it has correct source and target abstract interfaces or not.
    - Check the Message Mapping and interface Mapping manually from the Test Tab in IR.
    -Check the status of the Error of BPM in SXI_CACHEIntegration ProcessyourBPM. Code should be 0..if something else it is showming means it has an Error.
    -Check the Test data you are using to test your interface.
    - Check Webservice sending the correct response or it is failing at the time of response..may be because of WS is not running properly or server is down.</b>
    Thanks
    Farooq.

  • Capture Error in transformation Step and send it by email without Alerts

    Hi all,
         I have a problem in my BPM.
         I need to capture an error in transformation Step and send it by email with a send step without alerts. 
    Is there a way to do this in BPM?

    Hi Mariano,
    Please check the standard pattern in IR under software component SAP BASIS ->Integration process
    -->BpmPatternReqRespAlert.Hope this will help you for building the scenario.
    In this process we define a deadline branch to monitor the deadline. If the deadline is missed, an alert is triggered and this can be sent to an email too.
    Alert Configuration
    http://help.sap.com/saphelp_nw04/helpdata/en/80/942f3ffed33d67e10000000a114084/frameset.htm
    Alert Inbox
    http://help.sap.com/saphelp_nw04/helpdata/en/80/942f3ffed33d67e10000000a114084/frameset.htm
    Alert Notification Step-by-Step
    http://help.sap.com/saphelp_nw04/helpdata/en/49/cbfb40f17af66fe10000000a1550b0/frameset.htm
    Hope this helps.
    Best regards,
    Sharath
    Edited by: sharath Girmaji on Dec 19, 2008 7:17 PM

  • Error in 14th step  LSMW

    I have done all the steps in LSMW.I can display the converted data in 12th step.but in 13 th step create batch input session I am getting error.In 14 step I have run the process in front end,its go to MM01 screen and ask to type the value.
    it not automaticly picking the value.kindly guide me...

    Hi,
    this error will be coming becasue of mismtch structure fields in Flat file. Check the sequence of data u specified in flat file is according to the fields u specified in LSMW or not?
    Ashven

  • Error in Trasformation step

    Hi,
      I have a scenario where if the condition satisfied i need to send it to both receiver file and email otherwise if not only to email.
      Here i declared the 2 idoc Abstract MI(payment and verfication) and 1 file Abstract receiver.  Here only payment need to be send as output.  But I am getting error in transformation step as
    Expression must return the interface type PAYEXT.PEXR2002.ZEXR2002.
    Expression must return the interface type MIPaymentadviceFile
      In this scenario please tell me how many transformation need to be used and currently I used only one before switch statement because all the sender need to send the same output.
    Regards,
    Dhill

    Hi Bhavesh,
       My actual scenario is
    I need to receive 2 IDOC PAYMENT (N TIMES) and VERIFICATION (1 TIMES) so n:1 ration.  In this in the payment idoc I have field where I need to find the sum of the field then I need to campare withe the VERIFICATION Idoc with other too field like
    if IDCREF01-E1IDRH1-PAYRUNID equals to PEXR2001-E1IDRH1-PAYRUNID and
    IDCREF01-E1IDRH1-PAYRUNDT equals to PEXR2001-E1IDRH1-PAYRUNDT and
    IDCREF01-E1IDRS1-SUM01 equals to PEXR2001-E1IDKU5-MOABETR.
    where MOABETR is the sume field.  And if the condition is satisfied then i wl send only PAYMENT IDOC to file and as well as mail otherwise only 2 file.
    Please let me know whether it could be possible without BPM and if yes let me know the details and I am sorry i have raised so many forum whether I am getting stucked but till now not able to proceed further.
    If you want i will explain the BPM step which involved.
    Regards,
    senthi.

  • APP-PAY-06153 SYSTEM ERROR:Procedure at step 1

    Hi All,
    I select Inventory ,Vision Operations(USA) responsibility---------->Setup----->Oraganisations----->organisations
    when i selected that getting the below error.
    APP-PAY-06153 System Error:Procedure INIT_FORMS STEP 1
    cause: The Procedure INIT_FORMS created an error at STEP 1
    ACTION: contact your system administrator quoting the procedure INIT_FORMS and step 1.
    any suggesions on this.
    Regards,
    Nag.

    931161 wrote:
    I having the same issue in CA Super HRMS Manager Responsibility>Enter and Maintain Form when I have tried to open giving me this error.Do I need to set up under this responsibility ?
    profile options HR:Security Profile:What value to select?
    and HR:Business Group :What value to select?
    HR:User Type ...What value to select?It depends on your setup.
    http://www.oracle.com/pls/ebs121/ranked?word=HR:Business+Group&partno=e13477
    http://www.oracle.com/pls/ebs121/ranked?word=HR:Business+Group&partno=e13471
    Thanks,
    Hussein

Maybe you are looking for