Error at Import_Proper : Some clarifications?

Hi,
I am facing this error while installing the ST-A/PI (01J_ECC600) support packages. I
am getting stuck at IMPORT_PROPER with error. The error message read as
follows.
Action Logs
import phase 'IMPORT_PROPER' (08.05.2010, 08:22:03)
Error during executing the tp command 'tp R3I all ECQ ...'
tp return code: '0013' , tp message: 'A tool used by tp got a signal from operating syst' , tp output:
initial value of NLS_LANG: 'AMERICAN_AMERICA.WE8DEC'
This is tp version 372.04.88 (release 700)
Warning: Parameter DBLIBPATH is no longer used.
Warning: Parameter DBSWPATH is no longer used.
ERROR: stopping on error 13 during MAIN IMPORT
stopping on error 13 during MAIN IMPORT
tp returncode summary:
TOOLS: Highest return code of single steps was: 13
WARNS: Highest tp internal warning was: 0118
standard output from tp and from tools called by tp:
Details of the error situation can also be found in the import logs
Abort the import due to an error situation (08.05.2010, 08:22:04)
Import Logs
R3trans received signal 11 from operating system.
Main import
End date and time : 20100510101224
Ended with return code: ===> 13 <===
I am at the Kernel patch level 236(latest) and also having the
tp and R3trans updated to the latest possible level on top of the
new kernels
My questions are:
1. May be I missed a trick by not updating SPAM to the latest level as I am currently on SPAM level 30. Is this any way creating this prolem? (Most Probably)
2. If that is the issue causing this problem, Is there anyway I can remove the lock set in SAINT and proceed to SPAM update through PAT* table. If I remove the locks will the repository/dictionary objects generated through the update also get deleted?
3. Also, If its not possible to remove these locks, is it possible to run SPAM and update it in parallel
Since, we are not so keen on going for the restore of the complete database, we look forward to any means of getting this right.
Please suggest!
Thanks
I

Hello,
Please check whether any user is doing transports while your appling support packages.
It is advised to lock all users,except SAP*,DDIC and your User ID and then proceed applying support packs.
Regards,
Chaitanya.

Similar Messages

I cannot use iCloud on Windows 7, as it won't recognize my apple ID when i try to sign in to icloud it i get error saying "you can't sign in because of a server error (please help some one)

I cannot use iCloud on Windows 7, as it won't recognize my apple ID when i try to sign in to icloud it i get error saying "you can't sign in because of a server error (please help some one)

Although your message isn't mentioned in the symptoms, let's try the following document with that one:
Apple software on Windows: May see performance issues and blank iTunes Store

How can I solve this error message? Some of your photos, including the photo "IMG_0374.jpg", were not copied to the iPad "(my name's) iPad" because they cannot be displayed on your iPad.

how can I solve this error message? "Some of your photos, including the photo “IMG_0374.jpg”, were not copied to the iPad “(my name’s) iPad” because they cannot be displayed on your iPad."
There were 273 photos in the event syncing from my Mac, but only the last 103 made it to the ipad. Most of the photos were taken by an iphone. I would appreciate any thoughts or insights - thanks.

Adrian-
That error message suggests the photo is somehow corrupt.
Do you have the Apple Camera Connection Kit? You can set up a USB thumb drive with MS-DOS FAT-32 format and copy your photos to it into a folder named DCIM. Assuming they have an 8 character plus suffix name, the iPad will recognize them and give you the option of transferring them via the Kit's USB adapter.
Once they are transferred, you can find out if there is a problem with any.
Fred

Need some clarification on Replacement Path with Variable

Hello Experts,
Need some clarification on Replacement Path with Variable.
We have 2 options with replacement path for characteristic variables i.e.
1) Replace with query
2) Replace with variable.
Now, when we use "Replace with variable" we give the variable name. Then we get a list for "Replace with" as follows:
1) Key
2) External Characteristic Value Key
3)Label
4)Attribute value.
I need detailed explanation for the above mentioned 4 options with scenarios.
Thanks in advance.
Regards
Lavanya

Hi Lavanya,
Please go through the below link.
http://help.sap.com/saphelp_nw70/helpdata/EN/a4/1be541f321c717e10000000a155106/frameset.htm
Hope this gives you complete and detailed explaination.
Regards,
Reddy

I previously downloaded the AI 30 day trial but was able to use it before the trial ran out I've since deleted it from my laptop (Windows 7 64 bit OS) How do I get it back? Trying to download AI again and getting error code 3 some thing to do with adminis

I previously downloaded the AI 30 day trial but was able to use it before the trial ran out I've since deleted it from my laptop (Windows 7 64 bit OS) How do I get it back? Trying to download AI again and getting error code 3 some thing to do with administration permissions?

If your intention is to use the trial again it will not reset if you reinstall. It will remain in its ran out state.

Error:COMMON-1: Some unexpected internal error has occured.

Error:COMMON-1: Some unexpected internal error has occured. If the problem persists please report to the Tech Support.
Error: No response from the device "a.b.c.d/161". Check SNMP communities, version or network for issues.
Above errors are seen on accessing WLC for config purpose from WCS. Seen after migrating WCS 4.2.62 to a new hardware and restoring the backed config.
OS and software versions remain the same, only new hardware is an upgraded one.
The original server is now put back in place and works .. just fine.

In this migration, everything is absolutely same except the hardware.
Same WLCs, same WCS version. IP/hostname/configs all same.

Reviewed documentation on Reporting: I will appreciate some clarification

Hi,
Reviewed documentation on Reporting: I will appreciate some clarification:
1. Can you help me understand what "Staging" means as used here:
A data warehouse system serves primarily to stage information from various data source
The information is staged in various forms including personalized reports, freely definable queries, and predefined reports.
2. Is RemoteCube the same as Virtual Cubes? if not, what is the difference?
3. Can you help me understand what "flexible update" means as used here:
Characteristic InfoObjects have to be included in the InfoProvider tree in the Data Warehousing Workbench to make them available as data targets for flexible updates and as InfoProviders for reporting.
4. "DataStore Objects are available for transaction data and for master data."
When do we decide to store master data in a DSO?
5. Formula Collision vs. "Exception Aggregation"
I understand what formula collision is about but is it the same as "Exception Aggregation"?
If not, do you have a real-life example to help me understand the concept of "Exception Aggregation"?
The documentation/link is not helping.
6. i. With the followin limitation on Display attribute, why not always make the attribute Navigational?
"You can show Display Attributes in a report in the drilldown. However, navigation steps are not possible. (For example, you cannot choose values from a display attribute as a filter.)"
ii. Any example where Nav Attrib does not make sense but it must be Display attrib?
Thanks

Hi Amanda,
2. Is RemoteCube the same as Virtual Cubes? if not, what is the difference?
Yes, they are one and the same.
3.Can you help me understand what "flexible update" means as used here:
Characteristic InfoObjects have to be included in the InfoProvider tree in the Data Warehousing Workbench to make them available as data targets for flexible updates and as InfoProviders for reporting.
in 3.x, you have infosources and not transformations. So you have basically two types of infosources, direct update and flexible update.
Direct update infosources do not have any update rules. These are used for master data loading since the format of data is usually fixed as in fields etc.
Flexible update datasources have update rules, which means that you can use it for loading pretty much anything. You can load master data by changing the update rules and you can use the same infosource for loading transactional data as well. What the statement means is that the infoobject has been set as an infoprovider. and therefore it can be used as a source in a query. The loading is done via flexible updates.
More info on direct and flexible updates can be found here :[3.x InfoSource Types|http://help.sap.com/erp2005_ehp_04/helpdata/EN/87/3fdf9587f211d5b2ff0050da4c74dc/frameset.htm]
5)Formula Collision vs. "Exception Aggregation"
I understand what formula collision is about but is it the same as "Exception Aggregation"?
If not, do you have a real-life example to help me understand the concept of "Exception Aggregation"?
The documentation/link is not helping.
I'm glad that you understand what formula collision is...since its a difficult concept. Exception aggregation is much simpler.
For every key figure that is present in BW, there are two types of aggregations that can be maintained.
Standard: can be sum etc.
and exception aggregation like avg etc. When you do this, you need to give a reference characteristic. By default this is time. and usually it is summation. Now when you drilldown in your query based on the ref. characteristic, the exception aggregation is used.
Eg [http://help.sap.com/saphelp_nw70/helpdata/en/d2/e0173f5ff48443e10000000a114084/frameset.htm]
6. With the followin limitation on Display attribute, why not always make the attribute Navigational?
"You can show Display Attributes in a report in the drilldown. However, navigation steps are not possible. (For example, you cannot choose values from a display attribute as a filter.)"
ii. Any example where Nav Attrib does not make sense but it must be Display attrib?
Essentially this is a preference or a personal choice basically. You can have several attributes. but keeping all of them as navigational does not help and degrades system performance as they have to be interlinked. For eg.
You have an employee ID as your characteristic.
attributes are as follows
Date of birth
division
salary stack
*** etc
now things like division,salary stack and *** could be used as filters in a query but date of birth would in general not be used as filter and hence would make no sense to use it as a navigational attribute(unless you want to find all employees whose birthday is a certain date ).
In the end, it just comes down to the requirement. If you are required to put a filter on an attribute of master data, then it needs to be a nav. attribute else a display attribute would suffice.
Hope this helps.
Regards.

Need some clarifications on Quality-of-services

Hi Everybody.
I need some clarification on Quality-of-services.the question is which one is better in Quality-of-services (Exactly-Once or Exactly-Once-In-order)?why?wht is the differenc between them?

Hi Narayana
refer the below Urls
make the QOS of file as EO or EOIO and then use this blog,
/people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit
It depends upon the Adapter,Can you please spicific
http://help.sap.com/saphelp_erp2005vp/helpdata/en/41/b714fe5ffc11d5b3ea0050da403d6a/content.htm
Check these blogs written on QoS:
XI Asynchronous Message Processing: Understanding XI Queues
How to deal with stuck EOIO messages in the XI 3.0 Adapter Framework
EO = Exactly Once ( Used in Asynchronous Communication)
EOIO = Exactly Once In Order ( Used in Asynchronous Communication)
BE = Best Effort ( Used in Synchronous Communication)
Best Effort --> Used for Synchronous Calls.
EO and EOIO --> Asynchronous Calls.
EOIO --> Asynchronous with Sequential Processing Guranteed.
http://help.sap.com/saphelp_nw04/helpdata/en/41/b714fe5ffc11d5b3ea0050da403d6a/frameset.htm
For the QOS, u can refer the following library links .
http://help.sap.com/saphelp_nw04/helpdata/en/41/b714fe5ffc11d5b3ea0050da403d6a/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/ae/d03341771b4c0de10000000a1550b0/frameset.htm
For receiver channels QoS BE (Best Effort) will result in a
synchronous call (sRFC) , QoS EO (Exactly Once) will create a
transactional call (tRFC) to the BC. For sender channels a synchronous
call (sRFC) will result in a message with QoS BE, a transactional call
(tRFC) will result in a message with QoS EO.
QoS EOIO is not supported by the BC-Adapter.
SAP XI term Quality of service describing how the transmission and process-ing of messages is to be handled. Possible values are:
BE = BestEffort (synchronous call, no transactional guarantees for transmission and processing)
EO = ExactlyOnce (asynchronous call, guarantee for local transactional handling, exactly-once transmission and exactly-once processing)
EOIO = ExactlyOnceInOrder (as for EO but with serialization guarantee on a given queue name).
<b>Pls reward if useful</b>

'Time Our Error while executing some BW reports.'

Hello BW experts ,
We are getting the 'Time Our Error while executing some BW reports.'
Could anyone help us to solve the above issue.
regards,
Amol.

hi Amol,
it may query performance problem,
try to execute from RSRT,
and click 'properties' from rsrt and try to set read mode = H query to read ... navigate or expand hierarchy
and cache mode = 1.
take a look following
oss note
557870 'FAQ BW Query Performance'
and 567746 'Composite note BW 3.x performance Query and Web'.
Prakash's weblog
/people/prakash.darji/blog/2006/01/27/query-creation-checklist
/people/prakash.darji/blog/2006/01/26/query-optimization
BW Performance Tuning Knowledge Center - SAP Developer Network (SDN)
Business Intelligence Performance Tuning [original link is broken]
performance docs on query
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3f66ba90-0201-0010-ac8d-b61d8fd9abe9
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/cccad390-0201-0010-5093-fd9ec8157802
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/ce7fb368-0601-0010-64ba-fadc985a1f94
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/c8c4d794-0501-0010-a693-918a17e663cc
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/064fed90-0201-0010-13ae-b16fa4dab695

I am trying to download i tunes onto my pc but get an error saying that some old i tune files can not be deleted before reinstalling.

I am trying to download i tunes onto my pc (Windows XP) but get an error saying that some existing files can not be deleted to be re installed. I have tried several time but to no avail.

Many thanks, that's perfect.
The older version of apple software update cannot be removed. Contact your technical support group.
(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any Apple Software Update entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install using an iTunesSetup.exe (or iTunes64Setup.exe) downloaded from the Apple Website:
http://www.apple.com/itunes/download/
Does it go through properly this time?

Show ip cef switching statistic output - some clarifications required

Good morning, everyone!
I need some clarifications regarding ouput of show ip cef switching statistic on Catalyst 6k and some entries apply to other platforms as well. Consider output:
#show ip cef switching statistics
       Reason                          Drop       Punt Punt2Host
RP LES No route                      179269          0      12866
RP LES Packet destined for us             0 153061543          2
RP LES No adjacency                12460594          0          0
RP LES Incomplete adjacency           10400          0          0
RP LES Unresolved route                1476          0          0
RP LES Bad checksum                      17          0          0
RP LES TTL expired                        0          0   24725338
RP LES IP options set                     0          0          3
RP LES Fragmentation failed, DF 1757274333          0     481160
RP LES Features                         975          0       5278
RP LES IP redirects                       0          0          7
RP LES Unknown input if                 192          0          0
RP LES Neighbor resolution req     32540982       7290          0
RP LES Total                     1802468238 153068833   25224654
All    Total                     1802468238 153068833   25224654
Questions are:
1) What the difference between rows
RP LES No adjacency
RP LES Incomplete adjacency
RP LES Neighbor resolution req
2) What the difference between rows
RP LES No route
RP LES Unresolved route
3) What does mean collum name - Punt2Host?
I will higly aprecciate your answers! Thnx in advance.

So far I partially have found answer on first question.
RP LES Neighbor resolution req - here counted packets that have no adjacency and they are punted to arp request to send.
RP LES No adjacency - after ARP request sent throttling adjacency is installed for this destination for 2 seconds and all subsequent packets get drop. Those packets are counted here.
RP LES Incomplete adjacency - here packets counted which matches to incomplete adjacencies. Which are stays in adjacency table marked incomplete - as i understand it can happen after arp entry aged out. But those adjacencies must be deleted as well, but as i can see in my environment some of them stays for a while, i am a bit confused here.

Just needed some clarification regarding the Viewer Builder and actually publishing your App...

If someone could let me know if my understanding is correct, that'd be a huge help... So I've designed my publication in InDesign and exported the .zip file from the Folio Producer. I've created all of my certificates/splash screens/icons. Lastly, I just recently went through the steps of the Viewer Builder. I'm now at the stage of this process that requires me to purchase the $395 single edition so that I can enter the serial number in the last stage of the Viewer Builder. Now, to my knowledge, once I get the serial number, Viewer Builder will then give me access to an .ipa file and a .zip file. The .ipa file is for me to test on my iPad, and the .zip would be used to distribute to the App Store. I guess this is where I get confused... Let's say after I test the .ipa on my iPad, I don't like some part of my publication. I know how to update my own documents obviously, and I understand that I would have to export another .zip file from the Folio Producer, in turn requiring me to edit the exported folio link in the Viewer Builder. If I had to do that, would I need to purchase another single edition serial number since the original App was edited? Or would the same serial number apply since I'm editing that same App in the Viewer Builder? My next question is somewhat similar. Let's say all of the information is up to date and I go ahead and publish the App to the App Store. However, maybe a month later or some time in the future, I needed to update a phone number or email address--some little detail like that. Again, I understand that I'd have to update the export link in the Viewer Builder, but would I then need to create a new app since my app was already published? Would I then have to purchase another $395 single edition serial number just so that I can update my information? This seems to be the only thing in this whole process that I could use some clarification on so that I don't run into any surprises in the future. Any help would be great, thanks!

Hi Joshua,
When you have purchased the serial, you can rebuild your app with your updated content, as long as you use the same bundleID (applicationID), that is tied to your Apple mobile provisioning profile. The serial number is valid for a one year period.
After you have submitted your app to Apple and it has been approved, please read: http://forums.adobe.com/message/4172167#4172167
With kind regards,
Klaasjan Tukker
Adobe Systems

Some clarifications regarding Aironet settings

Hi,
i need some clarifications regarding configuring Aironet stand-alone AP (in this case AIR-LAP1131AG).
Under Security->SSID Manager:
what is the purpose of Network ID?
Under Guest Mode/Infrastructure SSID Settings - what is the purpose of Set Infrastructure SSID?
and Force Infrastructure Devices to associate only to this SSID?
Cheers,

Assign a Service Set Identifier (SSID) to each VLAN configured on the AP. SSIDs enable endpoints to select the wireless VLAN they will use for sending and receiving traffic. These wireless VLANs and SSIDs map to wired VLANs. For voice endpoints, this mapping ensures priority queuing treatment and access to the voice VLAN on the wired network
For further information click this link,
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/srnd/4x/42nstrct.html#wp1098806

Why all the errors appear after some hours on pc

Why all the errors appear after some hours on pc

Thanks for reply but the 2 HDD oki think the PS is 200 W that made that problem ?Or from TEMP ? i made it more able to flow the air & become better now

Error Patch IMPORT_PROPER phase

Dear support,
We were applying patches on Netweaver 2004s Oracle 10.2.0.2 Windows platform server. Basis patch 12 and it was successfull in Test mode , but during standard mode suddenly machine got restarted because of power problem.
Now database and SAP is up and running , but i am unable to proceed with any of transactions ( like SPAM ) as i get <b>syntax_error</b>. Patch is in IMPORT_PROPER phase so i cannot reset until i do some database work.
What i am just aware i need to check entries in PAT01 , PAT02 , PAT03 and TRBAT tables and delete entries from PAT01 there to reset the queue and run patch again.
I can login to database with user SAPSR3 and there are entries for Basis patch 12 in table PAT01.Can anyone tell me further actions and querry which need to be executed to delete entry in detail , as i am having one week old backup which is not usefull for me.Please let me know safest way out of this issue.
Please help me at earliest.
Best Regards,
AjitR

praveen ,
I havent deleted any entry from tables , please find below
SQL> select PATCH,STEPCOND,RET_CODE,MESSAGE from PAT01;
PATCH                                                        STE RET_CODE
MESSAGE
SAPKB70012                                                   ?
SQL> SELECT * FROM PAT02;
no rows selected
SQL> SELECT COUNT(*) FROM PAT03;
COUNT(*)
        33
SQL> SELECT COUNT(*) FROM PAT10;
COUNT(*)
         1
SQL> SELECT PATCH,STATUS,IMPL_MANDT from PAT10;
PATCH                                                        STA IMPL_MAND
SAPKB70012                                                   R   000
SQL> SELECT RETCODE,CLIENT,ARGUMENT FROM TRBAT;
RETCODE      CLIENT    ARGUMENT
F
logs are as below
Transport request ; SAPKB70012
SQL error 1089 accessing : ORA-01089 immediate shutdown in progress - no ope
Main import
Ended with Return code 12
could you throw some light on the same.

Error at Import_Proper : Some clarifications?

Similar Messages

Maybe you are looking for