Error at oracle 9i installation on solaris9

Hi,
I got error when oracle 9i installtion on solris 9i. at iinstallation it halts on 90%.
I got this message from oraInventory istallltion logfile i.e:
java.lang.OutOfMemoryError <<no stack trace available>>+
Please suggest how to overcome this problem without restart os .
Thanks in Advance

user10637311 wrote:
Hi,
I got error when oracle 9i installtion on solris 9i. at iinstallation it halts on 90%.
I got this message from oraInventory istallltion logfile i.e:
java.lang.OutOfMemoryError <<no stack trace available>>+
Please suggest how to overcome this problem without restart os .
Thanks in AdvanceYou do not have enough memory...or you did not configure the kernel parameters correctly.
:p

Similar Messages

Error while Oracle 10g Installation suse linux

Hi,
All i am facing issue while installing Oracle 10g release 2 on open suse.
All test are getting passed but getting a error reltated to ip address as follows.
INFO: Checking DetectIfDHCPAssignedIP
This is a prerequisite condition to test whether the primary IP address of the system is DHCP-assiged or static.
INFO: Detecting the IP.....:10.31.215.64
INFO: Checking the network interface display name.... :eth0
INFO: Checking the network reference name..... :eth0
INFO: Checking the platform .......46
INFO: Checking the LINUX vendor .... :SuSE
INFO: Check complete. The overall result of this check is: Not executed <<<<
Also while installing getting error as,
Checking Network Configuration requirements ...
Check complete. The overall result of this check is: Not executed <<<<
Recommendation: Oracle supports installations on systems with DHCP-assigned public
IP addresses. However, the primary network interface on the system should be
configured with a static IP address in order for the Oracle Software to function
properly. See the Installation Guide for more details on installing the software
on systems configured with DHCP.
Please help me to resolve issue.
BR,
Rajesh
Edited by: Rajesh.Rathod on Dec 20, 2010 12:52 AM

Hi,
I tried to follow each step of oracle documentation but network configuration requirement is failing.
please find following log.
Checking operating system requirements ...
Expected result: One of redhat-3,redhat-4,SuSE-9
Actual Result: SuSE-9
Check complete. The overall result of this check is: Passed
=======================================================================
Checking operating system package requirements ...
Checking for make-3.79; found make-3.81-128.14.     Passed
Checking for binutils-2.14; found binutils-2.19.51-10.26.4.     Passed
Checking for gcc-3.2; found gcc-4.4-4.2.     Passed
Checking for libaio-0.3.96; found libaio-0.3.104-144.2.     Passed
Check complete. The overall result of this check is: Passed
=======================================================================
Checking kernel parameters
Checking for semmsl=250; found semmsl=1250.     Passed
Checking for semmns=32000; found semmns=32000.     Passed
Checking for semopm=100; found semopm=100.     Passed
Checking for semmni=128; found semmni=256.     Passed
Checking for shmmax=536870912; found shmmax=3294967296.     Passed
Checking for shmmni=4096; found shmmni=4096.     Passed
Checking for shmall=2097152; found shmall=2097152.     Passed
Checking for file-max=65536; found file-max=131072.     Passed
Checking for VERSION=2.6.5-7.201; found VERSION=2.6.31.5-0.1-desktop.     Passed
Checking for ip_local_port_range=1024 - 65000; found ip_local_port_range=1024 - 65000.     Passed
Checking for rmem_default=262144; found rmem_default=4194304.     Passed
Checking for rmem_max=262144; found rmem_max=4194304.     Passed
Checking for wmem_default=262144; found wmem_default=262144.     Passed
Checking for wmem_max=262144; found wmem_max=262144.     Passed
Check complete. The overall result of this check is: Passed
=======================================================================
Checking Recommended glibc version
Expected result: ATLEAST=2.3.3-98.28
Actual Result: 2.10.1-10.4
Check complete. The overall result of this check is: Passed
=======================================================================
Checking physical memory requirements ...
Expected result: 922MB
Actual Result: 5460MB
Check complete. The overall result of this check is: Passed
=======================================================================
Checking available swap space requirements ...
Expected result: 5460MB
Actual Result: 10244MB
Check complete. The overall result of this check is: Passed
=======================================================================
Checking Network Configuration requirements ...
Actual Result: :java.lang.NullPointerException:Exception/Error Occurred
Check complete. The overall result of this check is: Not executed <<<<
Recommendation: Oracle supports installations on systems with DHCP-assigned public IP addresses. However, the primary network interface on the system should be configured with a static IP address in order for the Oracle Software to function properly. See the Installation Guide for more details on installing the software on systems configured with DHCP.
=======================================================================
Validating ORACLE_BASE location (if set) ...
Check complete. The overall result of this check is: Passed
=======================================================================
Checking Oracle Home path for spaces...
Check complete. The overall result of this check is: Passed
=======================================================================
Checking for proper system clean-up....
Check complete. The overall result of this check is: Passed
=======================================================================
Checking for Oracle Home incompatibilities ....
Actual Result: NEW_HOME
Check complete. The overall result of this check is: Passed
=======================================================================
Checking Network Configuration requirements ...
Actual Result: :java.lang.NullPointerException:Exception/Error Occurred
Check complete. The overall result of this check is: Not executed <<<<
Recommendation: Oracle supports installations on systems with DHCP-assigned public IP addresses. However, the primary network interface on the system should be configured with a static IP address in order for the Oracle Software to function properly. See the Installation Guide for more details on installing the software on systems configured with DHCP.
=======================================================================
Please suggest how to resolve.

Error in Oracle 10g Installation windows 2000 advance server

Hi,
I am facing error message below when try 2 install oracle 10 in my work station . Already 8i and 9i with forms and reports was there in my machine. The follwing error display in log file.
Actual Result: 4
Check complete. The overall result of this check is: Passed
=======================================================================
Checking physical memory requirements ...
Expected result: 256MB
Actual Result: 503MB
Check complete. The overall result of this check is: Passed
=======================================================================
Checking Network Configuration requirements ...
Check complete. The overall result of this check is: Failed <<<<
Problem: The install has detected that the primary IP address of the system is DHCP-assigned.
Recommendation: Oracle supports installations on systems with DHCP-assigned IP addresses; However, before you can do this, you must configure the Microsoft LoopBack Adapter to be the primary network adapter on the system. See the Installation Guide for more details on installing the software on systems configured with DHCP.
After given an ip address and proceeded. This error message is displayed in trace file:
Shutting down instance: further logons disabled
Mon May 07 11:32:09 2007
Stopping background process CJQ0
Mon May 07 11:32:09 2007
Stopping background process MMNL
Mon May 07 11:32:10 2007
Stopping background process MMON
Mon May 07 11:32:11 2007
Shutting down instance (immediate)
License high water mark = 1
Mon May 07 11:32:11 2007
Stopping Job queue slave processes
Mon May 07 11:32:11 2007
Job queue slave processes stopped
Waiting for dispatcher 'D000' to shutdown
All dispatchers and shared servers shutdown
Mon May 07 11:32:16 2007
alter database close normal
ORA-1507 signalled during: alter database close normal...
The error message in udump trace file is as follows:
Dump file e:\or10g\product\10.2.0\admin\or10g\udump\or10g_ora_2340.trc
Mon May 07 11:26:03 2007
ORACLE V10.2.0.1.0 - Production vsnsta=0
vsnsql=14 vsnxtr=3
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
With the Partitioning, OLAP and Data Mining options
Windows 2000 Version V5.0 Service Pack 4
CPU : 2 - type 586
Process Affinity : 0x00000000
Memory (Avail/Total): Ph:4M/503M, Ph+PgF:9M/1327M, VA:1740M/2047M
Instance name: or10g
Redo thread mounted by this instance: 0 <none>
Oracle process number: 0
Windows thread id: 2340, image: ORACLE.EXE (SHAD)
opiino: Attach failed! error=-1 ifvp=00000000
There is no pfile or anything in admin directory. Kindly help me in installing 10G for testing please
efshafi

Solution : Install and Configure Microsoft LoopBack Adapter:
Installation of Microsoft LoopBack Adapter:
1. Click Start, and then click Control Panel.
2. Click on Add Hardware and then Click Next.
3. Click Install the hardware that I manually select from a list, and then click Next.
4. Click Network adapters, and then click Next.
5. In the Manufacturer box, click Microsoft.
6. In the Network Adapter box, click Microsoft Loopback Adapter, and then click Next.
7. Click Finish.
Configuration of Microsoft LoopBack Adapter:
1. Click Start, and then click Control Panel.
2. Click on Network and Sharing Center.
3. On the left side of the Window, Cick Manage Network Connections.
4. You will find a name like "Local Area Connection 4 Unidentified Network Microsoft Loopback Adapter".
5. Right Click on it and select Properties.
6. Then Click on Internet Protocol Version 4 (TCP/IPv4) and then again click Properties.
7. Click on Use the following IP address and enter 192.168.1.10 for the IP Address and 255.255.255.0 for the subnet mask.
8. Click OK.
After this you can continue with the installation of the Oracle 10g again.

Error during oracle 8i installation on nt: orancrypt8.dll

Hi,
During oracle installation i get this error "can't copy orancrypt8.dll to orancrypt8.dll.bak". how do i solve this? the oracle is not working..pls help me out

8i hasn't been supported in years. I haven't seen NT in quite a while, I'm pretty sure Microsoft desupported that a while ago. Are you really trying to install a desupported version of Oracle on a desupported version of Windows?
Justin

Errors during Oracle 11gR2 Installation on Ubuntu

Hello everyone,
I known that Ubuntu ( and i'm talking about 10.04 or his latest version) is not the official version of OS for Oracle, but I'm trying do to a different work with students and they are more familiar with Ubuntu interface, but, when i'm trying to do Oracle installation on Ubuntu machine, i'm getting different kind of errors and i can't successfully finalize the installation. The list below show libs who OUI "complains" during the instalation, even every lib already installed and a list of prerequisites that are failed and will be show on the screen.
Please, can anyone help me with this steps. Sombody have some guide for this kind of instalation. The instalation on Ubuntu is a prerequisites
Erros will be show at the end of installation:
"Error in invoking target 'idg4odbc' of makefile '/u01/app/oracle/product/11.2.0/dbhome_1/rdbms/lib/ins_rdbms.mk'."
"Error in invoking target 'idg4odbc' of makefile '/u01/app/oracle/product/11.2.0/dbhome_1/rdbms/lib/ins_rdbms.mk'."
"Error in invoking target 'install' of makefile '/u01/app/oracle/product/11.2.0/dbhome_1/ctx/lib/ins_ctx.mk'."
"Error in invoking target 'all_no_orcl' of makefile '/u01/app/oracle/product/11.2.0/dbhome_1/rdbms/lib/ins_rdbms.mk'.
"Error in invoking target 'utilities' of makefile '/u01/app/oracle/product/11.2.0/dbhome_1/rdbms/lib/ins_rdbms.mk'."
Libs required for OUI but already installed:
binutils-2.15.92.0.2
compat-libstdc++-33-3.2.3
elfutils-libelf-0.97
elfutils-libelf-devel-0.97
gcc-3.4.6
gcc-c++-3.4.6
glibc-2.3.4-2.41
glibc-common-2.3.4
glibc-devel-2.3.4
glibc-headers-2.3.4
libaio-devel-0.3.105
libaio-0.3.105
libgcc-3.4.6
libstdc++-3.4.6
libstdc++-devel-3.4.6
make-3.80
numactl-0.6.4.i386
pdksh-5.2.14
sysstat-5.0.5
unixODBC-2.2.11
unixODBC-devel-2.2.11

As you stated, Ubuntu is not a certified distro for Oracle installs - so errors should be expected. Google for sites (like http://www.pythian.com/blog/installing-oracle-11gr2-enterprise-edition-on-ubuntu-10-04-lucid-lynx/) where others have documented their experiences. Also, just because you are able to install the software successfully does not mean it will work as advertised.
HTH
Srini

Error in Oracle Server Installation in AIX.--Urgent pls

I am in the process of installing Oracle Server in AIX Machine.
I am getting error when i install oracle.
The following is the output of make.log
/usr/ccs/bin/make -f ins_rdbms.mk part_on ORACLE_HOME=/oracle/DBW/102_64/     /bin/ar -X64 cr /oracle/DBW/102_64/rdbms/lib/libknlopt.a /oracle/DBW/102_64/rdbms/lib/kkpoban.o
/usr/ccs/bin/make -f ins_net_server.mk install ORACLE_HOME=/oracle/DBW/102_64/     /bin/chmod 755 /oracle/DBW/102_64/bin/
- Linking tnslsnr
     rm -f tnslsnr
     ld -b64 -o tnslsnr -L/oracle/DBW/102_64/network/lib/ -L/oracle/DBW/102_64/lib/ /oracle/DBW/102_64/network/lib/s0nsgl.o /oracle/DBW/102_64/network/lib/snsglp.o `cat /oracle/DBW/102_64/lib/ldflags` -lnsslb10 -lncrypt10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lnro10 `cat /oracle/DBW/102_64/lib/ldflags` -lnsslb10 -lncrypt10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lclient10 -lnnetd10 -lvsn10 -lcommon10 -lgeneric10 -lmm -lsnls10 -lnls10 -lcore10 -lsnls10 -lnls10 -lcore10 -lsnls10 -lnls10 -lxml10 -lcore10 -lunls10 -lsnls10 -lnls10 -lcore10 -lnls10 `cat /oracle/DBW/102_64/lib/ldflags` -lnsslb10 -lncrypt10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lnro10 `cat /oracle/DBW/102_64/lib/ldflags` -lnsslb10 -lncrypt10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lclient10 -lnnetd10 -lvsn10 -lcommon10 -lgeneric10 -lpls10 -lsnls10 -lnls10 -lcore10 -lsnls10 -lnls10 -lcore10 -lsnls10 -lnls10 -lxml10 -lcore10 -lunls10 -lsnls10 -lnls10 -lcore10 -lnls10 -lclient10 -lnnetd10 -lvsn10 -lcommon10 -lgeneric10 -lsnls10 -lnls10 -lcore10 -lsnls10 -lnls10 -lcore10 -lsnls10 -lnls10 -lxml10 -lcore10 -lunls10 -lsnls10 -lnls10 -lcore10 -lnls10 -lld -lm `cat /oracle/DBW/102_64/lib/sysliblist` -lm `if [ "\`/usr/bin/uname -v\`" = "4" ]; \
then echo "-bI:/oracle/DBW/102_64/lib/pw-syscall.exp"; fi;` /oracle/DBW/102_64/lib/nautab.o /oracle/DBW/102_64/lib/naeet.o /oracle/DBW/102_64/lib/naect.o /oracle/DBW/102_64/lib/naedhs.o /oracle/DBW/102_64/rdbms/lib/defopt.o -lmm -lons -lnl10 -ln10 -lnlsnr10 -lnlsnrc10 -lnsgr10 -lnms -lncm10 -lnmsp -lpeer -lnro10 -ln10 -lnl10 -lnlsnr10 -lnlsnrc10 -lnms -lncm10 -lnmsp -ln10 -lnnz10 -lm
ld: 0706-006 Cannot find or open library file: -l m
     ld:open(): No such file or directory
ld: 0706-006 Cannot find or open library file: -l m
     ld:open(): No such file or directory
ld: 0706-006 Cannot find or open library file: -l m
     ld:open(): No such file or directory
ld: 0706-006 Cannot find or open library file: -l m
     ld:open(): No such file or directory
make: The error code from the last command is 255.
The following is the output of installActions2007 file
INFO: End output from spawned process.
INFO: ----------------------------------
INFO: Exception thrown from action: make
Exception Name: MakefileException
Exception String: Error in invoking target 'install' of makefile '/oracle/DBW/102_64/network/lib/ins_net_server.mk'. See '/oracle/oraInventory/logs/installActions2007-11-02_10-42-16AM.log' for details.
Exception Severity: 1
since i need to solve this issue asap, I request you to please help

Assuming that you are following the written instructions available at http://docs.oracle.com that walk you through the install. And assuming you installed the correct versions of libraries. And assuming you set permissions correctly.
I'd suggest metalink and opening an SR.
If you didn't follow the docs ... rm -rf would be a good place to start.

Getting mkldflags error in Oracle 11gR2 installation on Solaris 10..

Hi Guys,
I am installing Oracle 11gR2 on Solaris 10 Server, but on 79%, I am getting below error :
Error in invoking target 'mkldflags ntcontab.o nnfgt.o' of makefile '/u4/ORA11/app/ora11/product/11.2.0/dbhome_1/network/lib/ins_net_client.mk'.
checked make.log, below is the error message:
/usr/ccs/bin/ar rv /app/oracle/product/11.2.0/grid/lib/libn11.a /app/oracle/product/11.2.0/grid/lib/nnfgt.o ; fi)
/usr/ccs/bin/as: "nnfgt.s", line 39: error: can't compute value of an expression involving an external symbol
make: Fatal error: Command failed for target `nnfgt.o'
Please suggest.....

If you have met all of the prereqs outlined in the Install Guide, then pl open an SR for this issue

Error during oracle 10g installation

HI
During oracle10g installlation on windows vista os
Enter prise manager configuration failed due to the error :starting starting database control refer to the log file at c:\product\10.2.0\db_1\cfgtoollogs\dbca\dbtest\emconfig.log
u can retry configuration this database with enterprise manager later by manually running c:\ora\product\10.2.0\db_1\bin\emca

Windows and Unix (in general) are different from the point of view that on windows platforms no relink operations are required, since the install media has the already compiled and linked executables and dll's required. On the unix like platforms, the story is different, relinking is required to create executables, since the install media has the object files. Makefiles are included to perform the relink operation and the relinking is nothing else but recreate executable images. If you were required to relink, probably it's because during install phase something went wrong and there were no relinked executables that made your working environment fail.
In this case, on the windows platform, this problem looks like a configuration issue.
~ Madrid

Mount ocfs2 error in oracle 10g installation on vmware

Dear All this is very urgent.....kindly help me...
i m running this command for mount ocfs folder but not run gives error below.......
[root@rac1 ~]#mount -t ocfs2 -o datavolume,nointr /dev/sda1 /ocfs
ocfs2_hb_ctl: Bad magic number in superblock while reading uuid
mount.ocfs2: Error when attempting to run /sbin/ocfs2_hb_ctl: "Operation not permitted"
--------I have run this command for checking----------
$ mounted.ocfs2 -d
$ mounted.ocfs2 -f
$ cat /etc/ocfs2/cluster.conf
$ /etc/rc.d/init.d/ocfs2 status [ as root ]
---------the output is below--------------------------------
--------From node 1----------------------------------------------
[root@rac1 ~]# mounted.ocfs2 -d
Device FS UUID Label
[root@rac1 ~]# mounted.ocfs2 -f
Device FS Nodes
[root@rac1 ~]# cat /etc/ocfs2/cluster.conf
node:
ip_port = 7777
ip_address = 172.16.31.195
number = 0
name = rac1
cluster = ocfs2
node:
ip_port = 7777
ip_address = 172.16.31.197
number = 1
name = rac2
cluster = ocfs2
cluster:
node_count = 2
name = ocfs2
[root@rac1 ~]#
[root@rac1 ~]# /etc/rc.d/init.d/ocfs2 status
[root@rac1 ~]#
----------------------from node 2----------------------------------
output from node2
[root@rac2 ~]# su -
[root@rac2 ~]# mounted.ocfs2 -d
-bash: mounted.ocfs2: command not found
[root@rac2 ~]# mounted.ocfs2 -f
-bash: mounted.ocfs2: command not found
[root@rac2 ~]# cat /etc/ocfs2/cluster.conf
node:
ip_port = 7777
ip_address = 172.16.31.195
number = 0
name = rac1
cluster = ocfs2
node:
ip_port = 7777
ip_address = 172.16.31.197
number = 1
name = rac2
cluster = ocfs2
cluster:
node_count = 2
name = ocfs2
[root@rac2 ~]# /etc/rc.d/init.d/ocfs2 status
[root@rac2 ~]#
the both node is installed on VMWARE AND LINUX IS OEL4....THE CONFIGRATION OF vmx file below
------from first node vmx file configration----------------------
.encoding = "windows-1252"
config.version = "8"
virtualHW.version = "7"
scsi0.present = "TRUE"
scsi0.virtualDev = "lsilogic"
memsize = "1056"
ide0:0.present = "TRUE"
ide0:0.fileName = "D:\vmware\ractesting\rac1.vmdk"
ide1:0.present = "TRUE"
ide1:0.autodetect = "TRUE"
ide1:0.deviceType = "cdrom-image"
floppy0.startConnected = "FALSE"
floppy0.fileName = ""
floppy0.autodetect = "TRUE"
ethernet0.present = "TRUE"
ethernet0.wakeOnPcktRcv = "FALSE"
ethernet0.addressType = "generated"
usb.present = "TRUE"
ehci.present = "TRUE"
sound.present = "TRUE"
sound.fileName = "-1"
sound.autodetect = "TRUE"
serial0.present = "TRUE"
serial0.fileType = "thinprint"
pciBridge0.present = "TRUE"
pciBridge4.present = "TRUE"
pciBridge4.virtualDev = "pcieRootPort"
pciBridge4.functions = "8"
pciBridge5.present = "TRUE"
pciBridge5.virtualDev = "pcieRootPort"
pciBridge5.functions = "8"
pciBridge6.present = "TRUE"
pciBridge6.virtualDev = "pcieRootPort"
pciBridge6.functions = "8"
pciBridge7.present = "TRUE"
pciBridge7.virtualDev = "pcieRootPort"
pciBridge7.functions = "8"
vmci0.present = "TRUE"
roamingVM.exitBehavior = "go"
displayName = "rac1"
guestOS = "rhel4"
nvram = "rac1.nvram"
virtualHW.productCompatibility = "hosted"
printers.enabled = "TRUE"
extendedConfigFile = "rac1.vmxf"
disk.locking="FALSE"
disklib.dataCacheMaxSize="0"
scsi1.sharedBus="virtual"
scsi0:0.present = "TRUE"
scsi0:0.fileName = "D:\sharedstorage\ocfs2disk.vmdk"
scsi0:0.mode = "independent-persistent"
scsi0:0.deviceType="disk"
scsi0:1.present = "TRUE"
scsi0:1.fileName = "D:\sharedstorage\asmdisk1.vmdk"
scsi0:1.mode = "independent-persistent"
scsi0:1.deviceType="disk"
scsi0:2.present = "TRUE"
scsi0:2.fileName = "D:\sharedstorage\asmdisk2.vmdk"
scsi0:2.mode = "independent-persistent"
scsi0:2.deviceType="disk"
scsi0:3.present = "TRUE"
scsi0:3.fileName = "D:\sharedstorage\asmdisk3.vmdk"
scsi0:3.mode = "independent-persistent"
scsi0:3.deviceType="disk"
ethernet1.present = "TRUE"
ethernet1.connectionType = "hostonly"
ethernet1.wakeOnPcktRcv = "FALSE"
ethernet1.addressType = "generated"
ide1:0.fileName = "E:\OEL4\Enterprise-R4-U4-i386-disc4.iso"
ethernet0.generatedAddress = "00:0c:29:de:6c:7a"
ethernet1.generatedAddress = "00:0c:29:de:6c:84"
uuid.location = "56 4d a1 a0 2f 33 08 24-12 e5 7a 39 a7 de 6c 7a"
uuid.bios = "56 4d a1 a0 2f 33 08 24-12 e5 7a 39 a7 de 6c 7a"
cleanShutdown = "FALSE"
replay.supported = "FALSE"
replay.filename = ""
ide0:0.redo = ""
scsi0:0.redo = ""
scsi0:1.redo = ""
scsi0:2.redo = ""
scsi0:3.redo = ""
pciBridge0.pciSlotNumber = "17"
pciBridge4.pciSlotNumber = "21"
pciBridge5.pciSlotNumber = "22"
pciBridge6.pciSlotNumber = "23"
pciBridge7.pciSlotNumber = "24"
scsi0.pciSlotNumber = "16"
usb.pciSlotNumber = "32"
ethernet0.pciSlotNumber = "33"
ethernet1.pciSlotNumber = "34"
sound.pciSlotNumber = "35"
ehci.pciSlotNumber = "36"
vmci0.pciSlotNumber = "37"
vmotion.checkpointFBSize = "16777216"
ethernet0.generatedAddressOffset = "0"
ethernet1.generatedAddressOffset = "10"
vmci0.id = "-1478595462"
checkpoint.vmState = ""
tools.syncTime = "TRUE"
tools.remindInstall = "FALSE"
ide1:0.startConnected = "FALSE"
------and also paste vmx file configration from node2---------------------
.encoding = "windows-1252"
config.version = "8"
virtualHW.version = "7"
scsi0.present = "TRUE"
scsi0.virtualDev = "lsilogic"
memsize = "1056"
ide0:0.present = "TRUE"
ide0:0.fileName = "rac2.vmdk"
ide1:0.present = "TRUE"
ide1:0.autodetect = "TRUE"
ide1:0.deviceType = "cdrom-image"
floppy0.startConnected = "FALSE"
floppy0.fileName = ""
floppy0.autodetect = "TRUE"
ethernet0.present = "TRUE"
ethernet0.wakeOnPcktRcv = "FALSE"
ethernet0.addressType = "generated"
usb.present = "TRUE"
ehci.present = "TRUE"
sound.present = "TRUE"
sound.fileName = "-1"
sound.autodetect = "TRUE"
serial0.present = "TRUE"
serial0.fileType = "thinprint"
pciBridge0.present = "TRUE"
pciBridge4.present = "TRUE"
pciBridge4.virtualDev = "pcieRootPort"
pciBridge4.functions = "8"
pciBridge5.present = "TRUE"
pciBridge5.virtualDev = "pcieRootPort"
pciBridge5.functions = "8"
pciBridge6.present = "TRUE"
pciBridge6.virtualDev = "pcieRootPort"
pciBridge6.functions = "8"
pciBridge7.present = "TRUE"
pciBridge7.virtualDev = "pcieRootPort"
pciBridge7.functions = "8"
vmci0.present = "TRUE"
roamingVM.exitBehavior = "go"
displayName = "rac2"
guestOS = "rhel4"
nvram = "rac2.nvram"
virtualHW.productCompatibility = "hosted"
printers.enabled = "TRUE"
extendedConfigFile = "rac2.vmxf"
ethernet1.present = "TRUE"
ethernet1.connectionType = "hostonly"
ethernet1.wakeOnPcktRcv = "FALSE"
ethernet1.addressType = "generated"
disk.locking="FALSE"
disklib.dataCacheMaxSize="0"
scsi1.sharedBus="virtual"
scsi0:0.present = "TRUE"
scsi0:0.fileName = "D:\sharedstorage\ocfs2disk.vmdk"
scsi0:0.mode = "independent-persistent"
scsi0:0.deviceType="disk"
scsi0:1.present = "TRUE"
scsi0:1.fileName = "D:\sharedstorage\asmdisk1.vmdk"
scsi0:1.mode = "independent-persistent"
scsi0:1.deviceType="disk"
scsi0:2.present = "TRUE"
scsi0:2.fileName = "D:\sharedstorage\asmdisk2.vmdk"
scsi0:2.mode = "independent-persistent"
scsi0:2.deviceType="disk"
scsi0:3.present = "TRUE"
scsi0:3.fileName = "D:\sharedstorage\asmdisk3.vmdk"
scsi0:3.mode = "independent-persistent"
scsi0:3.deviceType="disk"
ide1:0.fileName = "E:\OEL4\Enterprise-R4-U4-i386-disc4.iso"
ide1:0.startConnected = "FALSE"
ethernet0.generatedAddress = "00:0c:29:dc:e1:c9"
ethernet1.generatedAddress = "00:0c:29:dc:e1:d3"
tools.syncTime = "TRUE"
uuid.location = "56 4d c6 2a 5b 77 ee e5-79 46 84 cd 2b dc e1 c9"
uuid.bios = "56 4d c6 2a 5b 77 ee e5-79 46 84 cd 2b dc e1 c9"
cleanShutdown = "FALSE"
replay.supported = "FALSE"
replay.filename = ""
ide0:0.redo = ""
scsi0:0.redo = ""
scsi0:1.redo = ""
scsi0:2.redo = ""
scsi0:3.redo = ""
pciBridge0.pciSlotNumber = "17"
pciBridge4.pciSlotNumber = "21"
pciBridge5.pciSlotNumber = "22"
pciBridge6.pciSlotNumber = "23"
pciBridge7.pciSlotNumber = "24"
scsi0.pciSlotNumber = "16"
usb.pciSlotNumber = "32"
ethernet0.pciSlotNumber = "33"
ethernet1.pciSlotNumber = "34"
sound.pciSlotNumber = "35"
ehci.pciSlotNumber = "36"
vmci0.pciSlotNumber = "37"
vmotion.checkpointFBSize = "16777216"
usb:1.present = "TRUE"
ethernet0.generatedAddressOffset = "0"
ethernet1.generatedAddressOffset = "10"
vmci0.id = "735896009"
usb:1.deviceType = "hub"

What's the output of "/etc/init.d/o2cb status"
Have you formatted the partition i.e. mkfs -t ocfs2 /dev/sdb1

Error during Oracle Workflow installation to upload Business Events data

My problems is :
- I have installed correctly "Oracle workflow server 2.6.2" on Windows 2000;
- when I try to "upload Business Event System seed data" the system display this message :
ORA-20002 : 3819 File could not be opened or operated on as requested
ORA-06512 : at "OWF_MGR.WF_CORE", line 280
ORA-06512 : at "OWF_MGR.WF_EVENT_SYNCHRONIZE_PKG", line 357
ORA-06512 : at line 8
I have a machine configuration in this way :
machine A : oracle database 9i
machine B : application server 9iAS + Oracle Workflow server 2.6.2
Thank you in advice
Mohammed Amin

Hi Mohamed
In Workflow 2.6.2, you can load BES seed data using the wfxload command line utility. It is documented in the Workflow Guide.
Cheers
Mark

Oracle 10g Installation issue on Windows 7

Hi,
I tried to install Oracle 10g downloaded from the below link on my laptop which runs in Windows 7.
http://www.oracle.com/technetwork/database/10204-winx64-vista-win2k8-082253.html
The Oracle version is 10g release 2 for windows 7. I got this DB version no. for Windows 7 from this forum only. But still, I got the error message stated below and unable to install 10g.
------------------------------------------------------ Error --------------------------------------------------------------------------
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be 5.0, 5.1, 5.2 or 6.0 . Actual 6.1
Failed <<<<
Exiting Oracle Universal Installer, log for this session can be found at C:\Program Files (x86)\Oracle\Inventory\logs\installActions2010-10-22_07-37-48AM.log
Please press Enter to exit...
------------------------------------------------------ Error End -------------------------------------------------------------------
Could you please let me know how I can fix this issue? Or is there any other oracle 10g release/patch to fix this issue? I need to install only Oracle 10g and not 11g.
Also, I need to install Oracle Forms 10g too.
It would be great if you could guide me on installing these two softwares in my laptop.
Your help will be very much appreciated.
Thanks,
Arun
Edited by: 804404 on Oct 22, 2010 7:52 AM

Welcome to the forums !
This issue has been discussed many times before. Pl use the search feature. The only versions supported in Win 7 (Professional or higher) are 10.2.0.5 and 11gR2. 10.2.0.5 is only available on My Oracle Support, while 11gR2 can be downloaded for free from http://www.oracle.com/technetwork/database/enterprise-edition/downloads/index.html
Re: Oracle for Windows 7
Re: which version of oracle works on windows 7
HTH
Srini

Oracle 804 installation on unixware711

Hi ,
I am receiving ulimit errors during oracle 804 installation on unixware 711 .
please suggest some workaround and how to apply that too.

Don't know anything about unixware711 but on Linux we configure it by changin /etc/security/limits.conf file. Check whether this file exists on your system or not.
Daljit Singh

Error during Oracle installation in Oracle Enterprise Linux

Hi All,
I was trying to install Oracle 10g in Oracle Enterprise Linux, and I'm getting the following error when I give the command *./runInstall*.
[oracle@localhost database]$ ./runInstaller -responseFile /home/oracle/database/response/enterprise1.rsp -nowelcome
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1 or asianux-2
Passed
All installer requirements met.
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2012-04-05_12-58-11AM. Please wait ...[oracle@localhost database]$ Oracle Universal Installer, Version 10.2.0.1.0 Production
Copyright (C) 1999, 2005, Oracle. All rights reserved.
Can't connect to X11 window server using '127.0.0.1:0.0' as the value of the DISPLAY variable.
127.0.0.1:0.0
127.0.0.1:0.0
OUI-10025:Unable to start an interactive install session because of the following error:Can't connect to X11 window server using '127.0.0.1:0.0' as the value of the DISPLAY variable. The DISPLAY environment variable should be set to <hostname or IP address>:<screen>, where the <screen> is usually '0.0'.
OUI-10026:Depending on the Unix Shell, you can use one of the following commands as examples to set the DISPLAY environment variable:
- For csh: % setenv DISPLAY 192.168.1.128:0.0
- For sh, ksh and bash: $ DISPLAY=192.168.1.128:0.0; export DISPLAY
Use the following command to see what shell is being used:
echo $SHELL
Use the following command to view the current DISPLAY environment variable setting:
echo $DISPLAY
- Make sure that client users are authorized to connect to the X Server.
OUI-10027:To enable client users to access the X Server, open an xterm, dtterm or xconsole as the user that started the session and type the following command:
% xhost +
To test that the DISPLAY environment variable is set correctly, run a X11 based program that comes with the native operating system such as 'xclock':
% <full path to xclock... see below>
If you are not able to run xclock successfully, please refer to your PC-X Server or OS vendor for further assistance.
Typical path for 'xclock': '/usr/X11R6/bin/xclock'
I have tried to set the DISPLAY variable to my IP address, but it still gives the same issue.
Please find the logs for the same:
[oracle@localhost database]$ /sbin/ifconfig
eth0 Link encap:Ethernet HWaddr 00:0C:29:95:3B:4F
inet addr:192.168.64.128 Bcast:192.168.64.255 Mask:255.255.255.0
inet6 addr: fe80::20c:29ff:fe95:3b4f/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:532694 errors:0 dropped:0 overruns:0 frame:0
TX packets:288167 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:792077163 (755.3 MiB) TX bytes:16147337 (15.3 MiB)
Interrupt:193 Base address:0x2024
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:3280 errors:0 dropped:0 overruns:0 frame:0
TX packets:3280 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:1739143 (1.6 MiB) TX bytes:1739143 (1.6 MiB)
[oracle@localhost database]$ export DISPLAY=192.168.64.128:0.0
[oracle@localhost database]$ echo $DISPLAY
192.168.64.128:0.0
Please suggest on what can be done as this is the last step for the Oracle installation which I'm unable to complete.
Let me know for any more details needed.
Thanks
Ravi
Ph: +919583750774

Hi,
Thanks for the immediate response.
Now I'm getting the following error:
[oracle@scondw01 database]$ ./runInstaller -force -responseFile /u01/database/response/enterprise1.rsp -silent -nowelcome
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1 or asianux-2
Passed
All installer requirements met.
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2012-04-05_09-10-03PM. Please wait ...[oracle@scondw01 database]$ Oracle Universal Installer, Version 10.2.0.1.0 Production
Copyright (C) 1999, 2005, Oracle. All rights reserved.
Unexpected Signal : 11 occurred at PC=0xB7C297CE
Function=(null)
Library=/tmp/OraInstall2012-04-05_09-10-03PM/jre/1.4.2/lib/i386/client/libjvm.so
NOTE: We are unable to locate the function name symbol for the error
just occurred. Please refer to release documentation for possible
reason and solutions.
Current Java thread:
at oracle.sysman.oii.oiip.osd.unix.OiipuUnixOps.chgrp(Native Method)
at oracle.sysman.oii.oiip.oiipg.OiipgBootstrap.changeGroup(OiipgBootstrap.java:1206)
at oracle.sysman.oii.oiip.oiipg.OiipgBootstrap.writeInvLoc(OiipgBootstrap.java:900)
at oracle.sysman.oii.oiip.oiipg.OiipgBootstrap.updateInventoryLoc(OiipgBootstrap.java:408)
at oracle.sysman.oii.oiic.OiicSessionInterfaceManager.doInvSetupOperations(OiicSessionInterfaceManager.java:400)
at oracle.sysman.oii.oiic.OiicSilentInterfaceManager.doInvSetupOperations(OiicSilentInterfaceManager.java:679)
at oracle.sysman.oii.oiic.OiicInvSetupWCCE.doOperation(OiicInvSetupWCCE.java:217)
at oracle.sysman.oii.oiif.oiifb.OiifbCondIterator.iterate(OiifbCondIterator.java:171)
at oracle.sysman.oii.oiic.OiicPullSession.doOperation(OiicPullSession.java:1273)
at oracle.sysman.oii.oiic.OiicSessionWrapper.doOperation(OiicSessionWrapper.java:289)
at oracle.sysman.oii.oiic.OiicInstaller.run(OiicInstaller.java:546)
at oracle.sysman.oii.oiic.OiicInstaller.runInstaller(OiicInstaller.java:929)
at oracle.sysman.oii.oiic.OiicInstaller.main(OiicInstaller.java:866)
Dynamic libraries:
08048000-08056000 r-xp 00000000 08:01 511751 /tmp/OraInstall2012-04-05_09-10-03PM/jre/1.4.2/bin/java
08056000-08059000 rwxp 0000d000 08:01 511751 /tmp/OraInstall2012-04-05_09-10-03PM/jre/1.4.2/bin/java
a4d43000-a4d4a000 r-xp 00000000 08:01 659354 /tmp/OraInstall2012-04-05_09-10-03PM/oui/lib/linux/liboraInstaller.so
a4d4a000-a4d4b000 rwxp 00006000 08:01 659354 /tmp/OraInstall2012-04-05_09-10-03PM/oui/lib/linux/liboraInstaller.so
a4d4b000-a4d88000 r-xs 00000000 08:01 659257 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/jewt4-nls.jar
a4d88000-a4f2f000 r-xs 00000000 08:01 659256 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/jewt4.jar
a4f2f000-a4f67000 r-xs 00000000 08:01 659275 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/OraPrereq.jar
a4f67000-a5085000 r-xs 00000000 08:01 659274 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/classes12.jar
a5085000-a508d000 r-xs 00000000 08:01 659272 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/swingaccess.jar
a508d000-a50da000 r-xs 00000000 08:01 659255 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/ewt3-nls.jar
a50da000-a50e0000 r-xs 00000000 08:01 659273 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/ewt3-swingaccess.jar
a50e0000-a5365000 r-xs 00000000 08:01 659254 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/ewt3.jar
a5365000-a538c000 r-xs 00000000 08:01 659259 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/help4-nls.jar
a538c000-a53f1000 r-xs 00000000 08:01 659258 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/help4.jar
a53f1000-a54a6000 r-xs 00000000 08:01 659271 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/oracle_ice.jar
a54a6000-a54c3000 r-xs 00000000 08:01 659269 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/InstHelp_zh_TW.jar
a54c3000-a54e0000 r-xs 00000000 08:01 659268 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/InstHelp_zh_CN.jar
a54e0000-a54fe000 r-xs 00000000 08:01 659267 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/InstHelp_pt_BR.jar
a54fe000-a551b000 r-xs 00000000 08:01 659266 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/InstHelp_ko.jar
a551b000-a5537000 r-xs 00000000 08:01 659265 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/InstHelp_ja.jar
a5537000-a5554000 r-xs 00000000 08:01 659264 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/InstHelp_it.jar
a5554000-a5571000 r-xs 00000000 08:01 659263 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/InstHelp_fr.jar
a5571000-a558e000 r-xs 00000000 08:01 659262 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/InstHelp_es.jar
a558e000-a55ad000 r-xs 00000000 08:01 659261 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/InstHelp_de.jar
a55ad000-a55c9000 r-xs 00000000 08:01 659260 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/InstHelp.jar
a55c9000-a55ea000 r-xs 00000000 08:01 659270 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/InstImages.jar
a55ea000-a55f0000 r-xs 00000000 08:01 659345 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/ojmisc.jar
a55f0000-a56ce000 r-xs 00000000 08:01 659342 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/emCfg.jar
a56ce000-a56e1000 r-xs 00000000 08:01 659344 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/orai18n-mapping.jar
a56e1000-a57e1000 r-xs 00000000 08:01 659343 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/orai18n-collation.jar
a57e1000-a5866000 r-xs 00000000 08:01 659341 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/xml.jar
a5866000-a5868000 r-xs 00000000 08:01 659349 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/OraInstallerNet.jar
a5868000-a5876000 r-xs 00000000 08:01 659350 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/share.jar
a5876000-a593d000 r-xs 00000000 08:01 659347 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/srvm.jar
a593d000-a5a65000 r-xs 00000000 08:01 659346 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/xmlparserv2.jar
a5a65000-a5a72000 r-xs 00000000 08:01 659351 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/oneclick.jar
a5a72000-a5e0f000 r-xs 00000000 08:01 659348 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/OraInstaller.jar
a5e0f000-a5e2b000 r-xs 00000000 08:01 642421 /tmp/OraInstall2012-04-05_09-10-03PM/jre/1.4.2/lib/ext/sunjce_provider.jar
a5e2b000-a5ee6000 r-xs 00000000 08:01 642420 /tmp/OraInstall2012-04-05_09-10-03PM/jre/1.4.2/lib/ext/localedata.jar
a5ee6000-a5ef3000 r-xs 00000000 08:01 642419 /tmp/OraInstall2012-04-05_09-10-03PM/jre/1.4.2/lib/ext/ldapsec.jar
a5ef3000-a5ef6000 r-xs 00000000 08:01 642418 /tmp/OraInstall2012-04-05_09-10-03PM/jre/1.4.2/lib/ext/dnsns.jar
a60fa000-a62fa000 r-xp 00000000 08:01 330503 /usr/lib/locale/locale-archive
b5bfb000-b618a000 r-xs 00000000 08:01 511764 /tmp/OraInstall2012-04-05_09-10-03PM/jre/1.4.2/lib/charsets.jar
b618a000-b619b000 r-xs 00000000 08:01 511802 /tmp/OraInstall2012-04-05_09-10-03PM/jre/1.4.2/lib/jce.jar
b619b000-b6274000 r-xs 00000000 08:01 511803 /tmp/OraInstall2012-04-05_09-10-03PM/jre/1.4.2/lib/jsse.jar
b6274000-b628a000 r-xs 00000000 08:01 196225 /tmp/OraInstall2012-04-05_09-10-03PM/jre/1.4.2/lib/sunrsasign.jar
b62d4000-b79c2000 r-xs 00000000 08:01 511810 /tmp/OraInstall2012-04-05_09-10-03PM/jre/1.4.2/lib/rt.jar
b79c2000-b79d6000 r-xp 00000000 08:01 659151 /tmp/OraInstall2012-04-05_09-10-03PM/jre/1.4.2/lib/i386/libzip.so
b79d6000-b79d9000 rwxp 00013000 08:01 659151 /tmp/OraInstall2012-04-05_09-10-03PM/jre/1.4.2/lib/i386/libzip.so
b79d9000-b79f9000 r-xp 00000000 08:01 659136 /tmp/OraInstall2012-04-05_09-10-03PM/jre/1.4.2/lib/i386/libjava.so
b79f9000-b79fb000 rwxp 0001f000 08:01 659136 /tmp/OraInstall2012-04-05_09-10-03PM/jre/1.4.2/lib/i386/libjava.so
b79fb000-b7a0b000 r-xp 00000000 08:01 659150 /tmp/OraInstall2012-04-05_09-10-03PM/jre/1.4.2/lib/i386/libverify.so
b7a0b000-b7a0d000 rwxp 0000f000 08:01 659150 /tmp/OraInstall2012-04-05_09-10-03PM/jre/1.4.2/lib/i386/libverify.so
b7a0d000-b7a16000 r-xp 00000000 08:01 344676 /lib/libnss_files-2.3.4.so
b7a16000-b7a17000 r-xp 00008000 08:01 344676 /lib/libnss_files-2.3.4.so
b7a17000-b7a18000 rwxp 00009000 08:01 344676 /lib/libnss_files-2.3.4.so
b7a1f000-b7a23000 rwxs 00000000 08:01 249425 /tmp/hsperfdata_oracle/5761
b7a23000-b7a44000 r-xp 00000000 08:01 344698 /lib/tls/libm-2.3.4.so
b7a44000-b7a45000 r-xp 00020000 08:01 344698 /lib/tls/libm-2.3.4.so
b7a45000-b7a46000 rwxp 00021000 08:01 344698 /lib/tls/libm-2.3.4.so
b7a46000-b7a58000 r-xp 00000000 08:01 344660 /lib/libnsl-2.3.4.so
b7a58000-b7a59000 r-xp 00011000 08:01 344660 /lib/libnsl-2.3.4.so
b7a59000-b7a5a000 rwxp 00012000 08:01 344660 /lib/libnsl-2.3.4.so
b7a5e000-b7a66000 r-xp 00000000 08:01 659161 /tmp/OraInstall2012-04-05_09-10-03PM/jre/1.4.2/lib/i386/native_threads/libhpi.so
b7a66000-b7a67000 rwxp 00007000 08:01 659161 /tmp/OraInstall2012-04-05_09-10-03PM/jre/1.4.2/lib/i386/native_threads/libhpi.so
b7a67000-b7e6d000 r-xp 00000000 08:01 659159 /tmp/OraInstall2012-04-05_09-10-03PM/jre/1.4.2/lib/i386/client/libjvm.so
b7e6d000-b7e88000 rwxp 00405000 08:01 659159 /tmp/OraInstall2012-04-05_09-10-03PM/jre/1.4.2/lib/i386/client/libjvm.so
b7e9c000-b7fc1000 r-xp 00000000 08:01 344696 /lib/tls/libc-2.3.4.so
b7fc1000-b7fc3000 r-xp 00124000 08:01 344696 /lib/tls/libc-2.3.4.so
b7fc3000-b7fc5000 rwxp 00126000 08:01 344696 /lib/tls/libc-2.3.4.so
b7fc7000-b7fc9000 r-xp 00000000 08:01 344656 /lib/libdl-2.3.4.so
b7fc9000-b7fca000 r-xp 00001000 08:01 344656 /lib/libdl-2.3.4.so
b7fca000-b7fcb000 rwxp 00002000 08:01 344656 /lib/libdl-2.3.4.so
b7fcc000-b7fda000 r-xp 00000000 08:01 344700 /lib/tls/libpthread-2.3.4.so
b7fda000-b7fdb000 r-xp 0000d000 08:01 344700 /lib/tls/libpthread-2.3.4.so
b7fdb000-b7fdc000 rwxp 0000e000 08:01 344700 /lib/tls/libpthread-2.3.4.so
b7fe9000-b7ffe000 r-xp 00000000 08:01 344641 /lib/ld-2.3.4.so
b7ffe000-b7fff000 r-xp 00015000 08:01 344641 /lib/ld-2.3.4.so
b7fff000-b8000000 rwxp 00016000 08:01 344641 /lib/ld-2.3.4.so
Heap at VM Abort:
Heap
def new generation total 576K, used 387K [0xa6550000, 0xa65f0000, 0xa70d0000)
eden space 512K, 69% used [0xa6550000, 0xa65a8f48, 0xa65d0000)
from space 64K, 50% used [0xa65d0000, 0xa65d8080, 0xa65e0000)
to space 64K, 0% used [0xa65e0000, 0xa65e0000, 0xa65f0000)
tenured generation total 1408K, used 1090K [0xa70d0000, 0xa7230000, 0xafb50000)
the space 1408K, 77% used [0xa70d0000, 0xa71e0938, 0xa71e0a00, 0xa7230000)
compacting perm gen total 4864K, used 4693K [0xafb50000, 0xb0010000, 0xb3b50000)
the space 4864K, 96% used [0xafb50000, 0xaffe5698, 0xaffe5800, 0xb0010000)
Local Time = Thu Apr 5 21:10:05 2012
Elapsed Time = 0
# HotSpot Virtual Machine Error : 11
# Error ID : 4F530E43505002EF
# Please report this error at
# http://java.sun.com/cgi-bin/bugreport.cgi
# Java VM: Java HotSpot(TM) Client VM (1.4.2_08-b03 mixed mode)
# An error report file has been saved as hs_err_pid5761.log.
# Please refer to the file for further information.
Please let me know what can be the solution.
thanks
Ravikanth

P6v7 Web Services Oracle Universal Installer Error Setting Java_Home veriab

Hi,
I am installing Primavera P6 v7 web serivces on a Ms Windows 2003 SP2 server machine but it gives error "error setting Java_Home environment variable" every time i run the oracle universal installer setup of P6 v7 web services. I have already installed Java JRE1.6.0_14 and set the JAVA_HOME variables in both system and user variables. I have also tried manually setting path of JAVA during setup but no luck so far everytime same error. I have been looking at the log file in oracle inventory folder but did not find any hint to resolve the issue.
Please suggest a solution or workaround.
Regards,
Shahid

r u using 32bit or 64bit java?? better to use 32 bit java. Create 3 variable for EPPM P6
1) variable name: JAVA_HOME Value: c:\Java32\JRE1.6.0_27
2) variable name: JRE_Location value: c:\Java32\jdk.1.6.0_27\jre
3) variable name: p6_java_home value: c:\Java32\jdk.1.6.0_27

Oracle 10gR2 installation error: ./runInstaller: line 54: PermissionDenied

Getting an error while installing oracle 10g release 2 on CentOS 5 (Linux Distribution)
Installed prerequisite RPM's:
-compat-db-4.2.52-5.1.i386.rpm - sysstat-7.0.2-1.el5.i386.rpm - libaio-devel-0.3.106-3.2.i386.rpm - libXp-1.0.0-8.1.el5.i386.rpm
And after making all changes to:
* Kernel Parameters * Setting Shell parameters * pam.d (login file) * centos/redhat release and profile files * created required groups and users.
Created path: /u01/app/oracle/product/10.1.0/db_1 (OFA Compliant) and copied .zip file in to it (Tried with a different path as well : install folder).
Unzipped the zipper file with 'oracle' user but getting an error while trying to run installer file (runInstaller)
===========================================================
[oracle@localhost database]$ ./runInstaller
*./runInstaller: line 54: /tmp/install/database/install/.oui: Permission denied*
[oracle@localhost database]$ ls -lh runInstaller
-rwxr-xr-x 1 root root 1.3K Jul 2 2005 runInstaller
===========================================================
Machine Details:
OS: CentOS
Environment: VMWare
DB: Oracle 10gR2
Space (Swap and Physical): Up to the mark as required.
Assistance required
Thanks
- Prashant Dixit

Hi Srini,
It worked but i'm getting a new error here while laucnhing Oracle Universal Installer:
==============================================
[oracle@localhost database]$ ./runInstaller
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1 or asianux-2
Passed
All installer requirements met.
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2012-01-27_12-25-14PM. Please wait ...[oracle@localhost database]$ Xlib: connection to ":0.0" refused by server
Xlib: No protocol specified
Exception in thread "main" java.lang.InternalError: Can't connect to X11 window server using ':0.0' as the value of the DISPLAY variable.
at sun.awt.X11GraphicsEnvironment.initDisplay(Native Method)
at sun.awt.X11GraphicsEnvironment.<clinit>(Unknown Source)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Unknown Source)
at java.awt.GraphicsEnvironment.getLocalGraphicsEnvironment(Unknown Source)
at java.awt.Window.init(Unknown Source)
at java.awt.Window.<init>(Unknown Source)
at java.awt.Frame.<init>(Unknown Source)
at oracle.ewt.popup.PopupFrame.<init>(Unknown Source)
at oracle.ewt.lwAWT.BufferedFrame.<init>(Unknown Source)
at oracle.sysman.oio.oioc.OiocOneClickInstaller.<init>(OiocOneClickInstaller.java:378)
at oracle.sysman.oio.oioc.OiocOneClickInstaller.main(OiocOneClickInstaller.java:2091)
==============================================
- Please Suggest.
Thanks
Prashant Dixit

Error at oracle 9i installation on solaris9

Similar Messages

Maybe you are looking for