Error at pa40 level.

Dear Friends,
While performing Hiring actions[pa40] at IT 0000 its giving error as "No entry in table T503 for 1MW" where 1 is my employee group and MW is employee sub group.
I have assigned ESG to EG. And also when i try to see this table at sm30 getting another error as "The maintenance dialog for table T503 is not complete or defined."
Why is that im not able to see this standard table in SM30..??
Also, please let me know
Request you to please help me out with your valuable suggestions.
Regards
Shabbir.

Hi
Check the below things in your config
1.Assignment of EG to ESG with correct country grouping selection (40 for india)
2.Go to SU01 and give ur user id
see in parameters
MOL and UGR maintained as 40 (India)
then try
3.Go to table V_503_C via sm30 and maintain the entries for your ESG
all the best
partha
Keep sharing and learning

Similar Messages

Error: Current patch level of database is unknown. Use latest dbpatch build

hi,
I am applying EP6SP2 CM&COLL patch 5 DBPATCH.
current portal version: version=6.0.2.29.0
current C&COLL version: CM_COLL version=60 SP2 Patch 5
Before applying this patch, i applied CM&COLL patch 4 hotfix 8 and the DBPATCH included in tht. Now, after applying CM&COLL patch 5, i tried to apply DBPATCH which comes with CMOLL patch5 SAR file. My database is oracle database. While applying this patch i encountred following error:

Current database version: SP2.CM.SPs
ERROR: Error: Current patch level of database is unknown. Use the latest dbpatch build
java.lang.Exception: Error: Current patch level of database is unknown. Use the latest dbp
atch build.
 at com.sapportals.wcm.tool.dbpatch.Database.getPatchList(Database.java:48)
 at com.sapportals.wcm.tool.dbpatch.DBPatch.patch(DBPatch.java:66)
 at com.sapportals.wcm.tool.dbpatch.DBPatch.main(DBPatch.java:26)

Now according to SAP Note 761224, they asked us to use updated DBPATCH attached to this note. But currently there are only 3 files attached of MSSQL. I want the updated ORACLE_DBPATCH files.
rgds,
Nilz

Hi,
i m thru. i raised the question in OSS. They rectified the mistake and attached dbpatch_oracle.zip to SAP note 761224.
rgds,
Nilz

Gets error "-17502; System Level Exception" while running the custom Step in NI TestStnad 2010

I have a custom teststand step which works like For loop in TestStand. Previously I was using LV 2009 and NI TestStand 4.2.1 and this step was working fine. Recently I upgraded my system to LV 2010 and TestStand 2010, since that it is not working.
When I run the step it gives error "-17502; System Level Exception". I have attached error screenshot.
I am using NIFlowControl.dll in this step.
Please do the needful.
Attachments:
System Levle Exception error.JPG ‏25 KB

The source code for NIFlowControl.dll ships with TestStand. Did you perhaps
1) modify the code and rebuild this dll in teststand 4.2.1, but did not move your changes into the 2010 version and recompile the 2010 version?
Or
2) Move your 4.2.1 version of this dll to 2010 in which case it might be missing important code that exists only in the 2010 version. It's best to redo your code changes to the 2010 version and recompile that if needed.
Also ideally your modified version of NIFlowControl.dll should be located in the teststand public directory rather than the program files directory.
-Doug

Account determination error at billing level

Hi,
for Account determination error at billing level
i checked the line item level for the material by highlighting the item, then GO TO > ITEM > ITEM DETAILS. here 5 line items are there , 4 line items have same "Acct asgnmt grp" and 1 line item is different at order level. i gess this is the problem if am wrong please correct me.
thanks
Edited by: pandu123 on May 26, 2011 2:24 AM
Edited by: pandu123 on May 26, 2011 2:32 AM

Hi Pandu
A/c deterimation error. 1st you check in customer master sales area data billing tab page with account assingment and go to material master u select particular material see in sales organization 2 tab with account assignment. and go to T.Code VKOA check the combination which is assiged A/c assingmnet group of customer and matrial account assingment group. If it is not come goto VFX3 and specify the customer execute and click on RELEASE FLAG. If it is error go to log see the digonsis.
Kind Regards
Chandra Mouli A

Error in MB31 level

hi everybody
i have an error at MB31 level
This particular error occured while doing MTO scenario, system says "GR quantity is greater than Confirmed quantity for the last transaction" though i gave the lesser quantiy also system shows the same error, can anyone help in this regard
thanks for all

Check your production order (CO02, CO03), click on the blue status icon "i" to see the status and if it's TECOed. Only if the necessay confirmations have been done, can receipt be carried out.

Error in Trace Level: could not create BPE proxy for message, no XML objec

Hi
We are doing a scenario of File to RFC using BPM and I am getting this errror in Tcode SXMB_MONI.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>

<SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="BPE_ADAPTER">UNKNOWN_MESSAGE</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>No object type found for this message; check the activation of the corresponding process</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
And getting this error in Trace level
could not create BPE proxy for message, no XML object definition found for message EB32BB50610A11DC9648001321CB837D
Why this error occurs?
What could be in error?
Thanks in advance
Regards
Sami Qureshi

Hi Sami,
Check if thse threads can help u,
Error in BPE Adapter
BPM - BPE_ADAPTER errors
BPE Adapter Error
Exeception during execution error
***********Reward points if helpfull************

Error:ID=2011;LEVEL=1] InhouseDocReader doSyntaxCheck() offset[239]

Dear SAP experts,
I am getting this error in my File Sender Communication Channel,
Error: javax.resource.ResourceException: --- Conversion of synchronous request from module chain ended with errors ---[Error:ID=2011;LEVEL=1] InhouseDocReader doSyntaxCheck() offset[239]: message structure error : segment CTA is not on the right position. DESCRIPTION: InhouseDocReader Warning: A Segment whitch does not match with the inputstructure was found during the syntax check and no other segment with a small error was found.
The message is a D96A_SLSRPT edifact message.
Are there any error in the message structure?
Kindly advise.
Fred

Hi Fred,
I refered your problem in the sites,as i got this answer:
Read it,may it helps you to solve the problem
although the SAP note tells that you only need to install the plugin till R3 4.6 you must install it for a 4.7 R3 as well.
It is only automatically available with WebAs 6.40 R/3 systems.
We had the same problem with our 4.7 R3 but after installing the WP-PI 6.00 everything worked fine.
Be sure that users which should have access later to the UWL have sufficient backend rights. There are several RFC rights they need to have. (e.g. RFC rights for function groups SYST and SWK1)
Reward points if this helps
Regards
Vani.

Error at lowest level

I am trying to use Berkeley DB XML on a Windows Vista Home Premium 32bit, but keep failing in the most simple scenarios: (I use ver 2.4.13)
1) Just after install (from .msi file) when I start the shell from the command prompt I just get:
dbxml: error at lowest level:
2) I tried to reinstall in different directories, but I have always the same error.
3) Of course I used the included dbxmlvars.bat for setting the environment.
Thanks

Hi,
The Windows binaries have not been tested on Vista. It appears that they will not run correctly. You will have to build from source.
Regards,
George

Gettin ORA-01461 error in informatica level

Hi All
Iam getting following error at informatica level.
WRT_8229 : Database errors occurred:
ORA-01461: can bind a LONG value only for insert into a LONG column
But we dont have any column with LONG datatype. only we have varchar2 datatype and date. its direct loading from source to target.
could you please provide me the solution
thanks
LNR

Looks like a bug..check metalink note 728074.1
Pls mark correct/helpful...

XL reporter error SB1 Patch level 11 on server 2008

Good Morning Everyone,
XL reporter error on patch level 11, server 2008:
Unable to connect to XL Reporter
Error! Server communication failed:
Cause: Error! Unable to get document! Type: 36
Cause: Application-defined or object-defined error
I have referred to the note 1304722( upgrade to P47), but is there any work around?

Dear Gordon,
No I am not. I do know there is a fix on Patch 47, but I wanted to know if there was a work around. They will be upgrading to 8.8, but for now I though maybe someone had a solution for a work around.

Error in pa40

Hello,
I am gettiing error in pa40 i.e personal actions
when i went to pa40=> personal no=>click on next button=>
the error is "employee is active since 00.00.0000" and the error message no is pg026
plz give me solution to overcome this error

Hi,
Pls check the function characteristic in table T529A. See if it is "1" and also check in PA30 if there is a record which already exists for that personnel no. If yes then you will not be able to run a PA40 action for that employee.
Thanks
Ranjeeta

Increase the DB size in Azure gives the Error " Msg 40197, Level 16, State 1, Line 1 The service has encountered an error processing your request. Please try again. Error code 40671."

Increase the DB size in Azure gives the following error
Msg 40197, Level 16, State 1, Line 1 The service has encountered an error processing your request. Please try again. Error code 40671.
i have used following ALTER query,
ALTER DATABASE database_name MODIFY (EDITION='Business', MAXSIZE=10GB);
Regards
Vel

Hi Taiye,
According to your description, in theory, we can modify the size of database, and the T-SQL statement in your post is right. So we need to verify if there is no problem with network when you execute the modification statement, in addition, you must be connected
to the master database when executing the ALTER DATABASE statement. As the error message, I recommend you login again and connect to the master database then run the statement again.
For more information, see: ALTER DATABASE (Windows Azure SQL Database)
If the error is still exist, the Microsoft support engineer will help to solve the problem from backend. Sometime delay might be expected. Your patience is greatly appreciated.
Thanks,
Sofiya Li
If you have any feedback on our support, please click here.
Sofiya Li
TechNet Community Support

I am trying to create an executable vi that will call out another vi and show its front panel in the executable. When I try this I recieve this error message "top level vi (my main vi) was stopped at unknown on the block diagram of (my sub vi)

I am trying to create an executable vi that will call out another vi and show its front panel in the executable. When I try this I recieve this error message "top level vi (my main vi) was stopped at unknown on the block diagram of (my sub vi)

Well the most common way is to enclude the vi's in the build spec either directly in the dependancies that the App builder automatically generates OR by declaring them in the build spec as "additional enclusions" (like you must do for dynamic vi calls in your app.
I have heard rummors about My.app Stuff.vi in a nugget Intaris posted- and I've wanted to dig deaper into Intaris' claims- but have not tried it myself.
If you go down the stuff.vi route Keep us curious guys posted
Jeff

Error in PA40 transaction - Management of Global Employees

Hi,
We are trying to implement Global Employment and have run into a serious error.
In PA40, I try an Expatriation Planning action and get the following error when I try to save the record.
Error Long Text
Grouped data for personnel number 91000074 does not match 01000035
Message no. PBAS_SERVICE042
Diagnosis
Personnel number 91000074 and 01000035 are supposed to be grouped with the grouping value 10 for infotype 0002. However, the number of data records of the infotype is not the same for these personnel numbers.
System Response
The system identifies all affected data records as inconsistent.
Procedure
Notify your system administrator.
Procedure for System Administration
The inconsistency described above can have several causes. The most likely causes are:
Customer-specific settings for grouping infotypes have been changed without the database being adjusted accordingly.
A customer program was used to add data to the database, without reference to the grouping values.
The infotype is not supposed to be grouped, but the grouping mechanism was activated inadvertently.
You must first identify the cause of the inconsistencies. You can use report RPUFIXDS to do this. ( I ran report, with no results for my
PERNRs)
We tried several other things from changing number ranges to turning Concurrent employment On. But the error was not fixed. We tried looking through OSS notes that could be related to Global Employment and CE but there was nothing relevant. We are on the latest patch levels for Basis and HR components.
Any help will be greatly appreciated.
Thank you
Amina

Yes the two pernrs belong to the same employee. Minimum set up on the infotypes you have mentioned has been performed. We are attempting to create the first step in the prepare for global assignment, which means setting up the assignment (copying infotypes from the original assignment). We can not get beyond the first IT0002 in the creation of the 2nd dialog, we never get to any IT's that are required for the concurrent employment infotypes.
Thanks
Amina

Error in content level mapping

Hi Gurus,
I designed star schema in that when as a standard practice (for making report performance faster) . I searched threads in forum and everything as defined i have done still I am getting errors.
1) I am setting content level agg. of fact for their based dimension then I am getting error in consistency check as
'[39008] Logical dimension table Dim_xyz has a source Dim_xyz that does not join to any fact source.'
, what i should do more for this ?
2) If i define content level mapping in dimensions for its same column like date for time dimension then i get error message as
'[nQSError: 14031] The content filter of a source for logical table: Dim_xyz references multiple dimensions.'
3) Also as we know fact table contains only measures and foreign keys of dimensions so why do i get error in consistency check as '[89001] The Physical Table '"Fact_xyz"' has no keys defined.'
I am fed of these stupid errors as why does not obi server understand that this is fact table. When I saw prebuilt rpd i did not find these types of error there.
Thanks for your instant reply,
Amol

Hi,
The scenario I am trying to test is a multi mapping scenario where I am trying to split one source message and create two target messages by using two different receiver interfaces, one for each message.
I am on PI 7.1 and when I test message mapping and operation mapping using the payload from SXMB_MONI, it is successful. Whereas when I test the scenario end to end I am getting the following error messages:
Operation Mapping
Employee_Out_SI_To_Employee1_In_SI_AND_Employee2_In_SI_OM
Name
Employee_Out_SI_To_Employee1_In_SI_AND_Employee2_In_SI_OM
Namespace
http://accenture.com/1:N_multi-mapping
Runtime error
Split mapping created no messages
Start tag ns0:Messages Add raw attribute xmlns:ns0="http://sap.com/xi/XI/SplitAndMerge" Start tag ns0:Message1 Close tag ns0:Message1 Start tag ns0:Message2 Close tag ns0:Message2 Close tag ns0:Messages
Could someone please help
Cheers,
S

Error at pa40 level.

Similar Messages

Maybe you are looking for