Error at SAP installation
Hello gurus
I'm installing a Central Instance of SAP R3 4.7 Enterprise Edition, the central instance in one host and the database in another host. I'm getting the error below and the installation stops.
ERROR 2012-01-26 17:52:04
FKD-00034 Query returned more than one result.
ERROR 2012-01-26 17:52:04
FKD-00035 Query did not return a result. Select attribute WHERE WapsInstanceName = getContextParameter ('WapsInstanceName' ) AND WapsSystemName = getContextParameter ('WapsSystemName' ) , statement:
ERROR 2012-01-26 17:52:04
FKD-00029 Subselect for table t_SAPComponent_Waps_Instance_SHARED, column WapsExeDir with WHERE clause WHERE WapsInstanceName = getContextParameter ('WapsInstanceName' ) AND WapsSystemName = getContextParameter ('WapsSystemName' ) failed.
ERROR 2012-01-26 17:52:04
MUT-02010 Internal error: Access to key db failed. Original message: Subselect to table >t_SAPComponent_Waps_Instance_SHARED< column name >WapsExeDir< using where clause >WHERE WapsInstanceName = getContextParameter ('WapsInstanceName' ) AND WapsSystemName = getContextParameter ('WapsSystemName' ) < ends with an exception. ExceptionText :single select returns more than on row .
WARNING 2012-01-26 17:52:04
The step diPrepareDbEnvironment with step key SAPSYSTEM_CI|ind|ind|ind|ind|ind|0|SAPSYSTEM|ind|ind|ind|ind|ind|0|SAPComponent|ind|ind|ind|ind|ind|0|DatabaseSystem|ind|ind|ora|ind|ind|0|DatabaseCommonParameters|ind|ind|ora|ind|ind|0|diPrepareDbEnvironment was executed with status ERROR.
WARNING 2012-01-26 17:54:09
An error occurred during the installation.
Do you have any ideia what could it be?
Regards
Juan
The installation guide informs to change the environment variable LD_LIBRARY_PATH and I changed as suggested in installation guide, but the error persists.
There are another environment variables besides LD_LIBRARY_PATH that I have to change?
VNCDESKTOP=xxx
HOSTNAME=xxx
TERM=xterm
SHELL=/bin/bash
HISTSIZE=1000
WINDOWID=6291495
XTERM_SHELL=/bin/bash
USER=root
LS_COLORS=no=00:fi=00:di=00;34:ln=00;36:pi=40;33:so=00;35:bd=40;33;01:cd=40;33;01:or=01;05;37;41:mi=01;05;37;41:ex=00;32:.cmd=00;32:.exe=00;32:.com=00;32:.btm=00;32:.bat=00;32:.sh=00;32:.csh=00;32:.tar=00;31:.tgz=00;31:.arj=00;31:.taz=00;31:.lzh=00;31:.zip=00;31:.z=00;31:.Z=00;31:.gz=00;31:.bz2=00;31:.bz=00;31:.tz=00;31:.rpm=00;31:.cpio=00;31:.jpg=00;35:.gif=00;35:.bmp=00;35:.xbm=00;35:.xpm=00;35:.png=00;35:.tif=00;35:
LD_LIBRARY_PATH=/sapmnt/TRN/exe:/oracle/10.2.0.5.5/lib
PATH=/usr/kerberos/sbin:/usr/kerberos/bin:/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/etc/opt/emcpower/bin:/root/bin:/usr/local/sbin:/usr/local/bin
MAIL=/var/spool/mail/root
PWD=/sapmnt/TRN/instdir/inst5
INPUTRC=/etc/inputrc
LANG=en_US.UTF-8
XTERM_VERSION=XTerm(215)
SSH_ASKPASS=/usr/libexec/openssh/gnome-ssh-askpass
HOME=/root
SHLVL=4
LOGNAME=root
LESSOPEN=|/usr/bin/lesspipe.sh %s
DISPLAY=:1.0
ORACLE_HOME=/oracle/10.2.0.5.5
G_BROKEN_FILENAMES=1
_=/bin/env
Similar Messages
-
Error in SAP Installation in phase 12 Create database
Hi gurus,
I´m stuck on sap installation main process.
I´m install SAP ERP 2005 SR2 (= ECC 6.0 SR2) with OS windows 2003 server X64 and the Database is Oracle 10.2.0.4 !
I´m facing with error in phase 12 of 44. That is in Create Database phase as you can see in following images:
Error --> http://img60.imageshack.us/img60/8488/errorinstallation12phas.jpg
Error Log --> http://img60.imageshack.us/img60/5725/errorinstallation12phas.png
I checked some log files, such sapinst.log and clsc.log and the css.log, following you can see them:
sapinst.log :
ERROR 2009-07-15 20:09:50
MUT-03025 Caught ESAPinstException in Modulecall: ESAPinstException: error text undefined.
ERROR 2009-07-15 20:09:50
FCO-00011 The step runCatprocSql with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_OraDBCheck|ind|ind|ind|ind|0|0|NW_OraDBMain|ind|ind|ind|ind|0|0|NW_OraDBStd|ind|ind|ind|ind|3|0|NW_OraDbBuild|ind|ind|ind|ind|5|0|runCatprocSql was executed with status ERROR .
On path/directory D:oracleERP102logsaperpaioclient :
clsc.log :
Oracle Database 10g CRS Release 10.2.0.4.0 Production Copyright 1996, 2008 Oracle. All rights reserved.
2009-07-15 20:02:01.672: [2292]utgdv:1:could not open registry key SOFTWAREOracleocr os error The system could not find the environment option that was entered.
2009-07-15 20:02:01.672: [2292]proprinit: Could not open raw device
2009-07-15 20:02:01.672: [2292]a_init:7!: Backend init unsuccessful :
2009-07-15 20:02:01.672: [2292]clsssinit: error(33 ) in OCR initialization
2009-07-15 20:02:02.844: [2292]utgdv:1:could not open registry key SOFTWAREOracleocr os error The system could not find the environment option that was entered.
2009-07-15 20:02:02.844: [2292]proprinit: Could not open raw device
2009-07-15 20:02:02.844: [2292]a_init:7!: Backend init unsuccessful :
css.log :
Oracle Database 10g CRS Release 10.2.0.1.0 Production Copyright 1996, 2005 Oracle. All rights reserved.
2009-07-14 22:01:19.831: [1748]utgdv:1:could not open registry key SOFTWAREOracleocr os error The system could not find the environment option that was entered.
Best regards,
João Dimas - PortugalHi uday kumar,
1: I install the DB release 10.2.0.1 through sapserver.cmd and next I install the patch 10.2.0.4 using setup.exe !!
2: The ora_sql_results.log have a big log ... I´m going put here the last entries of log: It´s possible to send you the log file of this using a personal message?! ...and so, in this way, you could see better the log file!!
PL/SQL procedure successfully completed.
SQL>
SQL> #Rem stop the job
SQL> BEGIN
2 BEGIN
3 -- call to stop the job
4 ORACLE_OCM.MGMT_CONFIG.stop_job;
5 EXCEPTION
6 WHEN OTHERS THEN
7 -- ignore any exception
8 null;
9 END;
10 END;
11 /
PL/SQL procedure successfully completed.
SQL>
SQL> #Rem submit the job and run now
SQL> execute ORACLE_OCM.MGMT_CONFIG.submit_job;
PL/SQL procedure successfully completed.
SQL> execute ORACLE_OCM.MGMT_CONFIG.run_now;
PL/SQL procedure successfully completed.
SQL>
SQL>
SQL> Rem ADD NEW PACKAGES/NEW POST CATPROC FIXED VIEWS ABOVE THIS BLOCK
SQL> -
SQL>
SQL> SET SERVEROUTPUT ON
SQL>
SQL> Rem Indicate CATPROC load complete and check validity
SQL> BEGIN
2 dbms_registry.update_schema_list('CATPROC',
3 dbms_registry.schema_list_t('SYSTEM', 'OUTLN', 'DBSNMP'));
4 dbms_registry.loaded('CATPROC');
5 dbms_registry_sys.validate_catproc;
6 dbms_registry_sys.validate_catalog;
7 END;
8 /
PL/SQL procedure successfully completed.
SQL>
SQL> SET SERVEROUTPUT OFF
SQL> exit;
Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SAPINST: End of output of SQL executing program D:oracleERP102/bin/sqlplus.
SAPINST found errors.
SAPINST The current process environment may be found in sapinst_ora_environment.log.
2009-07-15, 20:09:50 SAPINST ORACLE stop logging
Best regards,
João Dimas - Portugal -
Error in SAP installation in phase 19 of 34 - Import ABAP
Hi SAP Gurus,
Good day all, I'm facing problem when installing SAP ECC 6.0 EHP7 (IDES version). Its stucked in phase 19 of 34 Import ABAP.
Below are the error details:-
ECC Message Box
An error occurred while processing option SAP Business Suite 7i 2013 Support Release 1 > EHP7 for SAP ERP 6.0 ABAP Support Release 1 > Oracle > SAP Systems > Application Server ABAP > Standard System > Standard System( Last error reported by the step: Process call 'D:\usr\sap\ECC\SYS\exe\uc\NTAMD64\R3load.exe -testconnect' exits with error code 2. For details see log file(s) R3load.exe.log.). You can now:
Choose Retry
to repeat the current step.
Choose Log Files
to get more information about the error.
Stop the option and continue later.
Log files are written to C:\Program Files/sapinst_instdir/BS2013/BS2013SR1/ERP607SR1/ORA/INSTALL/STD/ABAP.
Below are the logs from R3load.exe:-
sapparam: sapargv(argc, argv) has not been called!
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
D:\usr\sap\ECC\SYS\exe\uc\NTAMD64\R3load.exe: START OF LOG: 20141006062234
D:\usr\sap\ECC\SYS\exe\uc\NTAMD64\R3load.exe: sccsid @(#) $Id: //bas/741_REL/src/R3ld/R3load/R3ldmain.c#6 $ SAP
D:\usr\sap\ECC\SYS\exe\uc\NTAMD64\R3load.exe: version R7.40/V1.8 [UNICODE]
Compiled Nov 23 2013 13:31:32
-------------------- Start of patch information ------------------------
patchinfo (patches.h): (0.009) Support for SUM/ZDM and DMO (note 1778564)
DBSL patchinfo (patches.h): (0.011) DBSL error corrections in 7.41: (4) LOBs (note 1928526)
--------------------- End of patch information -------------------------
process id 4612
DbSl Trace: Connect via SAPUSER not supported for kernel >= 740.
(DB) ERROR: db_connect rc = 256
DbSl Trace: Connect via SAPUSER not supported for kernel >= 740.
(DB) ERROR: DbSlErrorMsg rc = 29
D:\usr\sap\ECC\SYS\exe\uc\NTAMD64\R3load.exe: job finished with 1 error(s)
D:\usr\sap\ECC\SYS\exe\uc\NTAMD64\R3load.exe: END OF LOG: 20141006062234
Looking forward for your reply.
Regards,
Jay
-96-Hi
I'm afraid you forget selecting the SSFS option during installation and it is the only connection method supported for kernel 7.40
It should be possible to fix this manually and perform all the step to connect using SSFS... but restarting your installation might be faster & easier.
1622837 - Secure connection of AS ABAP to Oracle via SSFS
As of SAP Kernel Release 7.40 (irrespective of the Oracle version), only the secure connection (secure connect) is supported via SSFS.
Regards -
Error in SAP Installation , Dispatcher nto starting
Hi,
I am in the process of installaion of nW2004s in Ms SQL server .
When the Central instance is running , the sapinst could not restart the sap from sap management console.
When i tried to restart SAP from MMC the dispatcher gets stopped in 2 mins. Pls hlep
the folowing is the output of dev_disp file
Mon Mar 10 15:36:36 2008
kernel runs with dp version 229000(ext=109000) (@(#) DPLIB-INT-VERSION-229000-UC)
length of sys_adm_ext is 576 bytes
SWITCH TRC-HIDE on ****
***LOG Q00=> DpSapEnvInit, DPStart (01 3500) [dpxxdisp.c 1239]
* shared lib "dw_xml.dll" version 111 successfully loaded*
* shared lib "dw_xtc.dll" version 111 successfully loaded*
* shared lib "dw_stl.dll" version 111 successfully loaded*
* shared lib "dw_gui.dll" version 111 successfully loaded*
* shared lib "dw_mdm.dll" version 111 successfully loaded*
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3901
Mon Mar 10 15:36:41 2008
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds*
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5361]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >WDBSSAPBWD01_BWD_01 <
DpShMCreate: sizeof(wp_adm) 19248 (1480)
DpShMCreate: sizeof(tm_adm) 5584592 (27784)
DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080
DpShMCreate: sizeof(comm_adm) 552080 (1088)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (104)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1864)
DpShMCreate: sizeof(wall_adm) (41664/36752/64/192)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 000000000F270050, size: 6275136)
DpShMCreate: allocated sys_adm at 000000000F270050
DpShMCreate: allocated wp_adm at 000000000F272150
DpShMCreate: allocated tm_adm_list at 000000000F276C80
DpShMCreate: allocated tm_adm at 000000000F276CE0
DpShMCreate: allocated wp_ca_adm at 000000000F7CA3B0
DpShMCreate: allocated appc_ca_adm at 000000000F7D0170
DpShMCreate: allocated comm_adm at 000000000F7D20B0
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 000000000F858D40
DpShMCreate: allocated gw_adm at 000000000F858DC0
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 000000000F858DF0
DpShMCreate: allocated wall_adm at 000000000F858E00
MBUF state OFF
DpCommInitTable: init table for 500 entries
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 4096 kByte.
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 127 blocks reserved for free list.
ES initialized.
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c 1629]
***LOG Q0K=> DpMsAttach, mscon ( WDBSSAPBWD01) [dpxxdisp.c 11753]
DpStartStopMsg: send start message (myname is >WDBSSAPBWD01_BWD_01 <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 111
Release check o.K.
Mon Mar 10 15:37:21 2008
ERROR => W0 (pid 3864) died [dpxxdisp.c 14441]*
ERROR => W1 (pid 5556) died [dpxxdisp.c 14441]*
ERROR => W2 (pid 5388) died [dpxxdisp.c 14441]*
ERROR => W3 (pid 5568) died [dpxxdisp.c 14441]*
ERROR => W4 (pid 4200) died [dpxxdisp.c 14441]*
ERROR => W5 (pid 5520) died [dpxxdisp.c 14441]*
my types changed after wp death/restart 0xbf --> 0xbe
ERROR => W6 (pid 5452) died [dpxxdisp.c 14441]*
my types changed after wp death/restart 0xbe --> 0xbc
ERROR => W7 (pid 2600) died [dpxxdisp.c 14441]*
my types changed after wp death/restart 0xbc --> 0xb8
ERROR => W8 (pid 4220) died [dpxxdisp.c 14441]*
ERROR => W9 (pid 4212) died [dpxxdisp.c 14441]*
ERROR => W10 (pid 3628) died [dpxxdisp.c 14441]*
my types changed after wp death/restart 0xb8 --> 0xb0
ERROR => W11 (pid 4176) died [dpxxdisp.c 14441]*
my types changed after wp death/restart 0xb0 --> 0xa0
ERROR => W12 (pid 5652) died [dpxxdisp.c 14441]*
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes*
DISPATCHER EMERGENCY SHUTDOWN ****
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=501
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Mar 10 15:37:31 2008
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Mon Mar 10 19:37:31 2008
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 3864 Ended no 1 0 0
1 DIA 5556 Ended no 1 0 0
2 DIA 5388 Ended no 1 0 0
3 DIA 5568 Ended no 1 0 0
4 DIA 4200 Ended no 1 0 0
5 DIA 5520 Ended no 1 0 0
6 UPD 5452 Ended no 1 0 0
7 ENQ 2600 Ended no 1 0 0
8 BTC 4220 Ended no 1 0 0
9 BTC 4212 Ended no 1 0 0
10 BTC 3628 Ended no 1 0 0
11 SPO 4176 Ended no 1 0 0
12 UP2 5652 Ended no 1 0 0
Dispatcher Queue Statistics Mon Mar 10 19:37:31 2008
===========================
--------++++--+
| Typ | now | high | max | writes | reads |
--------++++--+
| NOWP | 0 | 2 | 2000 | 6 | 6 |
--------++++--+
| DIA | 5 | 5 | 2000 | 5 | 0 |
--------++++--+
| UPD | 0 | 0 | 2000 | 0 | 0 |
--------++++--+
| ENQ | 0 | 0 | 2000 | 0 | 0 |
--------++++--+
| BTC | 0 | 0 | 2000 | 0 | 0 |
--------++++--+
| SPO | 0 | 0 | 2000 | 0 | 0 |
--------++++--+
| UP2 | 0 | 0 | 2000 | 0 | 0 |
--------++++--+
max_rq_id 12
wake_evt_udp_now 0
wake events total 8, udp 7 ( 87%), shm 1 ( 12%)
since last update total 8, udp 7 ( 87%), shm 1 ( 12%)
Dump of tm_adm structure: Mon Mar 10 19:37:31 2008
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Mon Mar 10 19:37:31 2008
=============================
Slots: 300, Used: 1, Max: 0
--------++--+
| id | owner | pid | eyecatcher |
--------++--+
*| 0 | DISPATCHER | -1 | WPCAAD000 |*
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=501
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Mar 10 15:37:36 2008
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >WDBSSAPBWD01_BWD_01 < (normal)
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes
Stop gateway
killing process (4208) (SOFT_KILL)
Stop icman
killing process (3768) (SOFT_KILL)
Terminate gui connections
wait for end of work processes
wait for end of gateway
[DpProcDied] Process lives (PID:4208 HANDLE:468)
waiting for termination of gateway ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=501
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Mar 10 15:37:37 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:4208 HANDLE:468)
wait for end of icman
[DpProcDied] Process lives (PID:3768 HANDLE:476)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=501
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Mar 10 15:37:38 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:3768 HANDLE:476)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=501Hi Balaji,
check errors on dev_w0 and post the here.
Regards
Juan -
Error in SAP installation ECC 6.0 "HKEY_LOCAL_MACHINE does not exist"
Here is log can any body suggest
INFO 2009-02-21 10:17:02
Connection request to guiengine backend by host 192.168.16.249 .
INFO 2009-02-21 10:17:07
Copied file 'C:/Program Files/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/inifile.xml' to 'C:/Program Files/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/inifile.2.xml'.
INFO 2009-02-21 10:17:07
Copied file 'C:/Program Files/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/inifile.xml' to 'C:/Program Files/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/inifile.3.xml'.
INFO 2009-02-21 10:17:07
Copied file 'C:/Program Files/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/keydb.xml' to 'C:/Program Files/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/keydb.2.xml'.
INFO 2009-02-21 10:17:07
Execute step changeUserInstall of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_First_Steps|ind|ind|ind|ind|0|0|Preinstall|ind|ind|ind|ind|0|0.
INFO 2009-02-21 10:17:23
Creating file C:\Program Files\sapinst_instdir\ERP\SYSTEM\ORA\CENTRAL\AS\change.log.
INFO 2009-02-21 10:17:23
Output of change user /install is written to the logfile change.log.
WARNING 2009-02-21 10:17:23
Execution of the command "change user /install" finished with return code 1. Output:
Install mode does not apply to a Terminal server configured for remote administration.
INFO 2009-02-21 10:17:23
Execute step chgautInstdirPublicAllOS4 of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_First_Steps|ind|ind|ind|ind|0|0|Preinstall|ind|ind|ind|ind|0|0.
INFO 2009-02-21 10:17:42
Execute step done of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_First_Steps|ind|ind|ind|ind|0|0.
INFO 2009-02-21 10:17:42
Execute step checkParams of component |NW_Onehost|ind|ind|ind|ind|0|0.
INFO 2009-02-21 10:17:42
Execute step fillContextForSoftwareFeatures of component |NW_Onehost|ind|ind|ind|ind|0|0.
INFO 2009-02-21 10:17:43
Execute step loadUsageTypes of component |NW_Onehost|ind|ind|ind|ind|0|0|SAP_Software_Features_Init|ind|ind|ind|ind|2|0.
INFO 2009-02-21 10:17:44
Execute step fillContextUsageTypes of component |NW_Onehost|ind|ind|ind|ind|0|0|SAP_Software_Features|ind|ind|ind|ind|3|0.
INFO 2009-02-21 10:17:44
Execute step setAllPossible of component |NW_Onehost|ind|ind|ind|ind|0|0|SAP_Software_Features|ind|ind|ind|ind|3|0|SAP_Software_Features_Prepare|ind|ind|ind|ind|0|0.
INFO 2009-02-21 10:17:45
Copied file 'C:/Program Files/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/usages_data.xml' to 'C:/Program Files/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/usages_data.1.xml'.
INFO 2009-02-21 10:17:45
Copied file 'C:/Program Files/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/usages_data.xml' to 'C:/Program Files/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/usages_data.2.xml'.
INFO 2009-02-21 10:17:45
Copied file 'C:/Program Files/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/jexclude.xml' to 'C:/Program Files/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/jexclude.1.xml'.
INFO 2009-02-21 10:17:45
Execute step determineScenarioParameters of component |NW_Onehost|ind|ind|ind|ind|0|0|SAP_Software_Features|ind|ind|ind|ind|3|0|SAP_Software_Features_Prepare|ind|ind|ind|ind|0|0.
INFO 2009-02-21 10:17:45
Execute step prepareUsagesTableForUserInputXml of component |NW_Onehost|ind|ind|ind|ind|0|0|SAP_Software_Features|ind|ind|ind|ind|3|0|SAP_Software_Features_Prepare|ind|ind|ind|ind|0|0.
INFO 2009-02-21 10:17:46
Execute step determinePossibleUsageTypesXml of component |NW_Onehost|ind|ind|ind|ind|0|0|SAP_Software_Features|ind|ind|ind|ind|3|0|SAP_Software_Features_Prepare|ind|ind|ind|ind|0|0.
INFO 2009-02-21 10:17:47
Execute step prepareUsagesTableForUserInputDB of component |NW_Onehost|ind|ind|ind|ind|0|0|SAP_Software_Features|ind|ind|ind|ind|3|0|SAP_Software_Features_Prepare|ind|ind|ind|ind|0|0.
INFO 2009-02-21 10:17:47
Execute step setDefaultsGuiValues of component |NW_Onehost|ind|ind|ind|ind|0|0|SAP_Software_Features|ind|ind|ind|ind|3|0|SAP_Software_Features_Prepare|ind|ind|ind|ind|0|0.
INFO 2009-02-21 10:17:47
Execute step setDefaultsStackDetermined of component |NW_Onehost|ind|ind|ind|ind|0|0|SAP_Software_Features|ind|ind|ind|ind|3|0|SAP_Software_Features_Prepare|ind|ind|ind|ind|0|0.
INFO 2009-02-21 10:17:47
Execute step chooseMandatory of component |NW_Onehost|ind|ind|ind|ind|0|0|SAP_Software_Features|ind|ind|ind|ind|3|0|SAP_Software_Features_Prepare|ind|ind|ind|ind|0|0.
INFO 2009-02-21 10:17:48
Execute step makeABAPPartsImpossible of component |NW_Onehost|ind|ind|ind|ind|0|0|SAP_Software_Features|ind|ind|ind|ind|3|0|SAP_Software_Features_Prepare|ind|ind|ind|ind|0|0.
INFO 2009-02-21 10:17:48
Execute step setDependencyRestrictions of component |NW_Onehost|ind|ind|ind|ind|0|0|SAP_Software_Features|ind|ind|ind|ind|3|0|SAP_Software_Features_Prepare|ind|ind|ind|ind|0|0.
INFO 2009-02-21 10:17:49
Execute step prepareScenario of component |NW_Onehost|ind|ind|ind|ind|0|0|SAP_Software_Features|ind|ind|ind|ind|3|0|SAP_Software_Features_Select|ind|ind|ind|ind|1|0.
INFO 2009-02-21 10:17:49
Execute step fillUsagesTable of component |NW_Onehost|ind|ind|ind|ind|0|0|SAP_Software_Features|ind|ind|ind|ind|3|0|SAP_Software_Features_Select|ind|ind|ind|ind|1|0.
INFO 2009-02-21 10:17:50
Execute step selectUsages of component |NW_Onehost|ind|ind|ind|ind|0|0|SAP_Software_Features|ind|ind|ind|ind|3|0|SAP_Software_Features_Select|ind|ind|ind|ind|1|0.
INFO 2009-02-21 10:18:00
Execute step selectUsagesNetWeaver of component |NW_Onehost|ind|ind|ind|ind|0|0|SAP_Software_Features|ind|ind|ind|ind|3|0|SAP_Software_Features_Select|ind|ind|ind|ind|1|0.
INFO 2009-02-21 10:18:03
Execution of the command "C:\j2sdk1.4.2_08\bin\java.exe -classpath C:/DOCUME1/ADMINI1/LOCALS~1/Temp/sapinst_exe.1988.1235191614/JAR/ins-j2ee.jar com.sap.ins.j2ee.GetSystemProperty" finished with return code 0. Output:
#Sat Feb 21 10:18:03 GMT+05:30 2009
java.runtime.name=Java(TM) 2 Runtime Environment, Standard Edition
sun.boot.library.path=C\:
j2sdk1.4.2_08
jre
bin
java.vm.version=1.4.2_08-b03
java.vm.vendor=Sun Microsystems Inc.
java.vendor.url=http\://java.sun.com/
path.separator=;
java.vm.name=Java HotSpot(TM) Client VM
file.encoding.pkg=sun.io
user.country=US
sun.os.patch.level=Service Pack 1
java.vm.specification.name=Java Virtual Machine Specification
user.dir=C\:
PROGRA1
SAPINS1
ERP
SYSTEM
ORA
CENTRAL
AS
java.runtime.version=1.4.2_08-b03
java.awt.graphicsenv=sun.awt.Win32GraphicsEnvironment
java.endorsed.dirs=C\:
j2sdk1.4.2_08
jre
lib
endorsed
os.arch=x86
java.io.tmpdir=C\:
DOCUME1
ADMINI1
LOCALS~1
Temp
line.separator=\r\n
java.vm.specification.vendor=Sun Microsystems Inc.
user.variant=
os.name=Windows 2003
sun.java2d.fontpath=
java.library.path=C\:
j2sdk1.4.2_08
bin;.;C\:
WINDOWS
system32;C\:
WINDOWS;D\:
oracle
product
10.2.0
db_1
bin;C\:
WINDOWS
system32;C\:
WINDOWS;C\:
WINDOWS
System32
Wbem;%JAVA_HOME%/bin
java.specification.name=Java Platform API Specification
java.class.version=48.0
java.util.prefs.PreferencesFactory=java.util.prefs.WindowsPreferencesFactory
os.version=5.2
user.home=C\:
Documents and Settings
Administrator
user.timezone=GMT+05\:30
java.awt.printerjob=sun.awt.windows.WPrinterJob
file.encoding=Cp1252
java.specification.version=1.4
java.class.path=C\:/DOCUME1/ADMINI1/LOCALS~1/Temp/sapinst_exe.1988.1235191614/JAR/ins-j2ee.jar
user.name=Administrator
java.vm.specification.version=1.0
java.home=C\:
j2sdk1.4.2_08
jre
sun.arch.data.model=32
user.language=en
java.specification.vendor=Sun Microsystems Inc.
awt.toolkit=sun.awt.windows.WToolkit
java.vm.info=mixed mode
java.version=1.4.2_08
java.ext.dirs=C\:
j2sdk1.4.2_08
jre
lib
ext
sun.boot.class.path=C\:
j2sdk1.4.2_08
jre
lib
rt.jar;C\:
j2sdk1.4.2_08
jre
lib
i18n.jar;C\:
j2sdk1.4.2_08
jre
lib
sunrsasign.jar;C\:
j2sdk1.4.2_08
jre
lib
jsse.jar;C\:
j2sdk1.4.2_08
jre
lib
jce.jar;C\:
j2sdk1.4.2_08
jre
lib
charsets.jar;C\:
j2sdk1.4.2_08
jre
classes
java.vendor=Sun Microsystems Inc.
file.separator=
java.vendor.url.bug=http\://java.sun.com/cgi-bin/bugreport.cgi
sun.io.unicode.encoding=UnicodeLittle
sun.cpu.endian=little
sun.cpu.isalist=pentium i486 i386
INFO 2009-02-21 10:18:03
Execution of the command "C:\j2sdk1.4.2_08\bin\java.exe -classpath C:/DOCUME1/ADMINI1/LOCALS1/Temp/sapinst_exe.1988.1235191614/JAR/ins-j2ee.jar;C:/DOCUME1/ADMINI1/LOCALS1/Temp/sapinst_exe.1988.1235191614/JAR/sapxmltoolkit.jar com.sap.ins.j2ee.TestClassLoader" finished with return code 0. Output:
CORRECT
INFO 2009-02-21 10:18:03
Found a valid JAVA_HOME directory C:\j2sdk1.4.2_08 with JDK version 1.4.2_08.
INFO 2009-02-21 10:18:03
Execute step getCD of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_getJavaHome|ind|ind|ind|ind|0|0.
INFO 2009-02-21 10:18:03
Execute step verifyJavaHome of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_getJavaHome|ind|ind|ind|ind|0|0.
INFO 2009-02-21 10:18:03
Execute step verifyPolicy of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_getJavaHome|ind|ind|ind|ind|0|0.
INFO 2009-02-21 10:18:04
Execute step setNWOption of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_getJavaHome|ind|ind|ind|ind|0|0.
INFO 2009-02-21 10:18:04
Execution of the command "C:\j2sdk1.4.2_08\bin\java.exe -classpath C:/DOCUME1/ADMINI1/LOCALS~1/Temp/sapinst_exe.1988.1235191614/JAR/ins-j2ee.jar com.sap.ins.j2ee.GetSystemProperty" finished with return code 0. Output:
#Sat Feb 21 10:18:04 GMT+05:30 2009
java.runtime.name=Java(TM) 2 Runtime Environment, Standard Edition
sun.boot.library.path=C\:
j2sdk1.4.2_08
jre
bin
java.vm.version=1.4.2_08-b03
java.vm.vendor=Sun Microsystems Inc.
java.vendor.url=http\://java.sun.com/
path.separator=;
java.vm.name=Java HotSpot(TM) Client VM
file.encoding.pkg=sun.io
user.country=US
sun.os.patch.level=Service Pack 1
java.vm.specification.name=Java Virtual Machine Specification
user.dir=C\:
PROGRA1
SAPINS1
ERP
SYSTEM
ORA
CENTRAL
AS
java.runtime.version=1.4.2_08-b03
java.awt.graphicsenv=sun.awt.Win32GraphicsEnvironment
java.endorsed.dirs=C\:
j2sdk1.4.2_08
jre
lib
endorsed
os.arch=x86
java.io.tmpdir=C\:
DOCUME1
ADMINI1
LOCALS~1
Temp
line.separator=\r\n
java.vm.specification.vendor=Sun Microsystems Inc.
user.variant=
os.name=Windows 2003
sun.java2d.fontpath=
java.library.path=C\:
j2sdk1.4.2_08
bin;.;C\:
WINDOWS
system32;C\:
WINDOWS;D\:
oracle
product
10.2.0
db_1
bin;C\:
WINDOWS
system32;C\:
WINDOWS;C\:
WINDOWS
System32
Wbem;%JAVA_HOME%/bin
java.specification.name=Java Platform API Specification
java.class.version=48.0
java.util.prefs.PreferencesFactory=java.util.prefs.WindowsPreferencesFactory
os.version=5.2
user.home=C\:
Documents and Settings
Administrator
user.timezone=GMT+05\:30
java.awt.printerjob=sun.awt.windows.WPrinterJob
file.encoding=Cp1252
java.specification.version=1.4
java.class.path=C\:/DOCUME1/ADMINI1/LOCALS~1/Temp/sapinst_exe.1988.1235191614/JAR/ins-j2ee.jar
user.name=Administrator
java.vm.specification.version=1.0
java.home=C\:
j2sdk1.4.2_08
jre
sun.arch.data.model=32
user.language=en
java.specification.vendor=Sun Microsystems Inc.
awt.toolkit=sun.awt.windows.WToolkit
java.vm.info=mixed mode
java.version=1.4.2_08
java.ext.dirs=C\:
j2sdk1.4.2_08
jre
lib
ext
sun.boot.class.path=C\:
j2sdk1.4.2_08
jre
lib
rt.jar;C\:
j2sdk1.4.2_08
jre
lib
i18n.jar;C\:
j2sdk1.4.2_08
jre
lib
sunrsasign.jar;C\:
j2sdk1.4.2_08
jre
lib
jsse.jar;C\:
j2sdk1.4.2_08
jre
lib
jce.jar;C\:
j2sdk1.4.2_08
jre
lib
charsets.jar;C\:
j2sdk1.4.2_08
jre
classes
java.vendor=Sun Microsystems Inc.
file.separator=
java.vendor.url.bug=http\://java.sun.com/cgi-bin/bugreport.cgi
sun.io.unicode.encoding=UnicodeLittle
sun.cpu.endian=little
sun.cpu.isalist=pentium i486 i386
INFO 2009-02-21 10:18:04
Execution of the command "C:\j2sdk1.4.2_08\bin\java.exe -classpath
finished with return code 0. Output:
CORRECT
INFO 2009-02-21 10:18:04
Found a valid JAVA_HOME directory C:\j2sdk1.4.2_08 with JDK version 1.4.2_08.
INFO 2009-02-21 10:18:04
Execute step collect of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_GetSidNoProfiles|ind|ind|ind|ind|1|0.
WARNING 2009-02-21 10:18:05
*Error 5 (Access is denied.
) in execution of a 'RegOpenKeyEx' function, line (69), with parameter (SYSTEM\CurrentControlSet\Services\ltpsnr).*
*WARNING 2009-02-21 10:18:05
The subkey 'HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\ltpsnr' does not exist on the 'localhost' host.*
*ERROR 2009-02-21 10:18:05
MOS-01185 The subkey 'HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\ltpsnr' does not exist on the 'localhost' host.*
ERROR 2009-02-21 10:18:05
FCO-00011 The step collect with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_GetSidNoProfiles|ind|ind|ind|ind|1|0|collect was executed with status ERROR .
INFO 2009-02-21 10:19:50
An error occured and the user decided to retry the current step: "|NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_GetSidNoProfiles|ind|ind|ind|ind|1|0|collect".
WARNING 2009-02-21 10:19:50
Error 5 (Access is denied.
) in execution of a 'RegOpenKeyEx' function, line (69), with parameter (SYSTEM\CurrentControlSet\Services\ltpsnr).
WARNING 2009-02-21 10:19:50
The subkey 'HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\ltpsnr' does not exist on the 'localhost' host.
ERROR 2009-02-21 10:19:50
MOS-01185 The subkey 'HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\ltpsnr' does not exist on the 'localhost' host.
ERROR 2009-02-21 10:19:50
FCO-00011 The step collect with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_GetSidNoProfiles|ind|ind|ind|ind|1|0|collect was executed with status ERROR .
INFO 2009-02-21 10:21:43
An error occured and the user decide to stop.\n Current step "|NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_GetSidNoProfiles|ind|ind|ind|ind|1|0|collect".
please provide me the solution .....Hello,
this error is really strange. At this step, sapinst scans all keys that are located under
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services
in order to find existing SAP services and to retrieve their parameters. Since this usually happens in a sorted way, many other keys must have already been successfully retrieved.
My guess is now that there is a problem that is related just to the service that was processed in the current iteration: ltpsnr
-> call regedit and go to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services
-> locate the ltpsnr entry, is it actually there? If yes:
-> right click on the entry and chose 'permissions'
-> are the permissions here actually different compared to the other entries?
Best Regards,
Michael -
Error in the installation SAP NW 2004s java edition
Hi,
I am trying to install the SAP NW JE 5, on Win XP SP2. I have created an MS loop back adapter
When i am trying to install...it is going upto 14 % and throwing a error
in the log the below is the content
Tue Jan 30 08:10:17 GMT 2007 MaxDB sdbinst: Creating database instance
Tue Jan 30 08:10:19 GMT 2007 MaxDB sdbinst: Starting communication service
Tue Jan 30 08:10:20 GMT 2007 MaxDB sdbinst: Logging in
Tue Jan 30 08:10:20 GMT 2007 MaxDB sdbinst: getInstalledReleasesWin(): wrong version format
Tue Jan 30 08:10:20 GMT 2007 MaxDB sdbinst: cannot write to network connection
Tue Jan 30 08:10:21 GMT 2007 MaxDB sdbinst: installation exited abnormally at Tu, Jan 30, 2007 at 08:10:20
Tue Jan 30 08:10:21 GMT 2007 MaxDB: Error during call to sdbinst, rc= 1
Tue Jan 30 08:10:21 GMT 2007 MaxDB: Done with call_sdbinst
Tue Jan 30 08:10:21 GMT 2007 MaxDB: rc of sdbinst = 1
Tue Jan 30 08:10:21 GMT 2007 MaxDB: Start of CallSdbuninst
Tue Jan 30 08:10:21 GMT 2007 MaxDB: IndepProgPath: c:/sapdb/programs
Tue Jan 30 08:10:21 GMT 2007 MaxDB: dbmcli path: c:/sapdb/programs/pgm/dbmcli.exe
Tue Jan 30 08:10:21 GMT 2007 MaxDB: Calling check for db_enum in case of an abort
Tue Jan 30 08:10:21 GMT 2007 MaxDB: Instroot for j2e is: c:\sapdb\j2e\db
Tue Jan 30 08:10:21 GMT 2007 MaxDB: j2e and its instroot is the only software installed.
Tue Jan 30 08:10:21 GMT 2007 MaxDB: will remove all software
Tue Jan 30 08:10:21 GMT 2007 MaxDB: done with db_enum
Tue Jan 30 08:10:21 GMT 2007 MaxDB: rc of Method: 0
Tue Jan 30 08:10:21 GMT 2007 MaxDB: IndepProgPath = c:/sapdb/programs
MaxDB: dbmcli_path = c:/sapdb/programs/pgm/dbmcli.exe
MaxDB: Database instance to drop: :J2E:
MaxDB: Instroot of J2E is: c:\sapdb\j2e\db
MaxDB: sdbuninst_option =
MaxDB: 0=uninstall all, 1=uninstall Kernel package, 2=drop database only, 3=do nothing
Tue Jan 30 08:10:21 GMT 2007 MaxDB: Checking x_server
Tue Jan 30 08:10:21 GMT 2007 MaxDB program: c:/sapdb/programs/bin/x_server.exe
Tue Jan 30 08:10:21 GMT 2007 MaxDB: Found c:/sapdb/programs/bin/x_server.exe
Tue Jan 30 08:10:21 GMT 2007 MaxDB: Calling: "c:/sapdb/programs/bin/x_server.exe" start
MaxDB: 18641 ERROR: XSERVER is already running!
Tue Jan 30 08:10:21 GMT 2007 MaxDB: rc of x_server call = 32
Tue Jan 30 08:10:21 GMT 2007 MaxDB: dropping database instance: J2E
Tue Jan 30 08:10:21 GMT 2007 MaxDB: Try to establish connection to J2E
Tue Jan 30 08:10:22 GMT 2007 MaxDB: Connect failed: com.sap.dbtech.rte.comm.RTEException: Cannot connect to host localhost [Invalid argument: connect], -813.
Tue Jan 30 08:10:22 GMT 2007 MaxDB: rc of Method: 1
Tue Jan 30 08:10:22 GMT 2007 MaxDB: sdbuninst
Tue Jan 30 08:10:22 GMT 2007 MaxDB program: c:/sapdb/programs/bin/sdbuninst.exe
Tue Jan 30 08:10:22 GMT 2007 MaxDB: Calling: "c:/sapdb/programs/bin/sdbuninst.exe" -all
MaxDB sdbuninst:
MaxDB sdbuninst: uninstall following package(s):
MaxDB sdbuninst:
MaxDB sdbuninst: SAP Utilities c:/sapdb/programs 7.6.00.33 32 bit
MaxDB sdbuninst: Database Kernel c:/sapdb/j2e/db 7.6.00.33 32 bit
MaxDB sdbuninst: Server Utilities c:/sapdb/programs 7.6.00.33 32 bit
MaxDB sdbuninst: JDBC c:/sapdb/programs 7.6.00.30
MaxDB sdbuninst: Messages c:/sapdb/programs MSG 0.3951
MaxDB sdbuninst: Webtools c:/sapdb/programs/web 7.6.00.33 32 bit
MaxDB sdbuninst: ODBC c:/sapdb/programs 7.6.00.33 32 bit
MaxDB sdbuninst: Base c:/sapdb/programs 7.6.00.33 32 bit
MaxDB sdbuninst:
MaxDB sdbuninst:
MaxDB sdbuninst: found instance J2E
MaxDB sdbuninst: cannot remove package "Database Kernel": first you have to remove all instances
MaxDB sdbuninst: fatal error at Tu, Jan 30, 2007 at 08:10:24
Tue Jan 30 08:10:26 GMT 2007 MaxDB Error during call to sdbuninst, rc= 1
Tue Jan 30 08:10:26 GMT 2007 MaxDB: Done with call_sdbuninst
Tue Jan 30 08:10:26 GMT 2007 MaxDB: rc of Method: 1
Tue Jan 30 08:10:26 GMT 2007 MaxDB: End of CallSdbuninst
I think it is becos of the wrong verson of the getInstalledReleasesWin()....
i had tried with the JRE 1.4 /1,5 and even with out the JRE Installation ,it goes up to 14 % and fails and throws the above error..
can any one help me to solve this issue...?????
with thanks
austinHi
check whtr latest avaiable OS service pack is applied or not.
try installing J2sdk1.4.2_08 or higher (don't go for j2sdk1.5). check whtr JAVA_HOME,SAPINST_JRE_HOME & PATH environmental variables are correctly set.
check whtr any hotfixes are available for DB, then make sure tht all the necessary services are up and running (like "server" & DB agents etc).
and then repeat the SAP installation process.
hope this info helps you!
with regards,
Raj
<i>pls, award points</i> -
Error in SAP Netwear Installation. sxi_cache Cache is obselete
Hi all,
I am trying to install SAP Netwear. I have installed it on MS SQL Server,using the guide SAP Installation SR1 on MS SQL.
I have been facing problems from the time i ran the template installer.The step 9 for creation of Creating RFC Destinations in the ABAP Environment had some errors so had to manually configure the RFC Destination to INTEGRATION_DIRECTORY_HMI. I have tested this Creation it has give a Error Code 500 Internal Server Error (The right error code according to the SAP Library)
I have run all the other steps and they have run sucessfully.
I am trying to go to sxi_cache transaction but there the error is the cache is obselete i tried to do a delta refresh (F6).It gives and Error ID Update and Error description as:
<b>com.sap.aii.ib.server.abapcache.CacheRefreshException: Connection to system REPOSITORY using application REPOSITORY lost. Detailed information: Error accessing "http://hydhtc100107:50100/rep/hmi_service_swc_manager/int?container=any" with user "XIDIRUSER". Response code is 403, response message is "Forbidden"</b>
Please give me inputs how i can solve this issue ... do i need to go to any other transaction and activate cache,so tht i can view the cache being updated.
Rgds
AdityaHi all,
I have tried access the link <b>http://hydhtc100107:50100/rep/hmi_service_swc_manager/int?container=any</b>
with the user XIDIRUSER bt it shows forbidden
I also face the same problem when i have access the administrator tab on the front end screen which has Intergration repository/directory/SLD and runtime workbench.
One more problem is that when i access runtime workbench it says ure forbidden
Please give me inputs totally confused with all wht has happened.
Rgds
Aditya -
Error while performing SAP Installation in HA Env on Windows Server 2008
Hello,
I am performing a SAP Installation in HA Environment on Windows Server 2008. I am at the ASCS installation step.
As per the guide before installing ASCS there are some activities to be carried out on Failover Cluster Management.
I have done all the steps except one as per the guide. I am stuck in the Add FileServer Step. In this step the guide says to go to the Dependencies tab and add the cluster disk resource to the dependencies list. It also says to add the Name:Virtual NetworkName to the dependencies list.
Now in my scenario I have 3 shared drives for SAP and I have added each of them in the dependencies list of the new FileServer. The only problem is how do I add the Name:Virtual NetworkName to this list
When I continue without giving the Network name the system issues a warning "This resource requires dependencies on instances of the following resource types or classes:Network Name. Not adding these dependencies will prevent the resource from working properly. Do you want to save the current settings anyway"
If I click on Yes and bring this resource online it fails with this error message
"The action Bring this resource online did not complete.An error occured while attempting to bring the resource 'SAPECC FileServer online'. The cluster resource could not be brought online by resource monitor."
My question is how to add the Name:VirtualNetworkName to the dependencies list of the FileServer.
Regards
Mitesh NairHi,
I have resolved the issue with the help of cluster admin
Regards
Mitesh -
Installation Error of SAP ERP 6.0 SR3 HA MSCS on Win2008 with DB2 9.1
Hi,
I am installing ERP 6.0 SR3 HA MSCS on Windows 2008 Ent. Server with DB2 9.1v. In IBM Clustered environment with 2 nodes and a SAN Storage. We are going through the SAP Installation Document.
1. Here my problem is I am not able to install DB2 with the Domain user. and this domain user having all authorization like (domain admin, domain user, administrators...) whenever I executed this command there is no response from system..
Drive:\Dump\DB2_LUW_9.1\WINDOWS_AMD64\ESE\image\setup.exe /i en /u Drive:\Dump\DB2_LUW_9.1\WINDOWS_AMD64\ESE\win_ese.rsp /p c:\db2\db2<SID>\db2_software /m
But the same command I executed in the Local administrator user it is installed successfully.
2. After this I executed this command db2icrtdummy in the Local Administrator, the command was successful then I executed next command
C:\Users\Administrator>db2extsec -a BRPLIND\DB2ADMNS_prd -u BRPLIND\DB2USERS
DB2EXTSEC: Logon failure: unknown user name or bad password.
So I logged out from administrator and logged in with domain user
and executed same command but it given following error
C:\db2\db2prd\db2_software\BIN>db2icrt dummy
DBI1918N An error occurred when accessing the Windows NT
registry.
Explanation:
DB2 encountered an error when attempting to read or update the
Windows NT registry of the target machine.
User Response:
Ensure that the current logon user account has sufficient
authority to access the Windows NT registry of the target
machine. If the problem persists, contact your IBM service
representative for assistance.
so am I going in the correct way or doing any mistake.? from here I am not able to go ahead
Please suggest me to clear this issue.
Thanks
UdayHi,
I am installing ERP 6.0 SR3 HA MSCS on Windows 2008 Ent. Server with DB2 9.1v. In IBM Clustered environment with 2 nodes and a SAN Storage. We are going through the SAP Installation Document.
1. Here my problem is I am not able to install DB2 with the Domain user. and this domain user having all authorization like (domain admin, domain user, administrators...) whenever I executed this command there is no response from system..
Drive:\Dump\DB2_LUW_9.1\WINDOWS_AMD64\ESE\image\setup.exe /i en /u Drive:\Dump\DB2_LUW_9.1\WINDOWS_AMD64\ESE\win_ese.rsp /p c:\db2\db2<SID>\db2_software /m
But the same command I executed in the Local administrator user it is installed successfully.
2. After this I executed this command db2icrtdummy in the Local Administrator, the command was successful then I executed next command
C:\Users\Administrator>db2extsec -a BRPLIND\DB2ADMNS_prd -u BRPLIND\DB2USERS
DB2EXTSEC: Logon failure: unknown user name or bad password.
So I logged out from administrator and logged in with domain user
and executed same command but it given following error
C:\db2\db2prd\db2_software\BIN>db2icrt dummy
DBI1918N An error occurred when accessing the Windows NT
registry.
Explanation:
DB2 encountered an error when attempting to read or update the
Windows NT registry of the target machine.
User Response:
Ensure that the current logon user account has sufficient
authority to access the Windows NT registry of the target
machine. If the problem persists, contact your IBM service
representative for assistance.
so am I going in the correct way or doing any mistake.? from here I am not able to go ahead
Please suggest me to clear this issue.
Thanks
Uday -
Error during sap r/3 installation at update databse statistics
Hi friends,
I am getting an error during sap r/3 installation almost at the last stage.
the error is at update database statistics.
my configuration is
os: windows 2000 server.
d/b: oracle 9i.
erp: sap 4.7 ee
During oracle installation stage the oui is asking for create a database, i am chechking it ok. Is that a problem ?.
I am sending the log file. Please can anybody help me, where i am going wrong-
The log file----
Click Browse and give location of export1, as shown in the bellow figure
INFO 2007-02-04 21:46:32
Creating directory D:\oracle\DRS\sapdata4\drs620_5.
INFO 2007-02-04 21:46:32
Creating file system node D:\oracle\DRS/sapdata4\drs620_5 with type DIRECTORY succeeded.
INFO 2007-02-04 21:46:32
Creating directory D:\oracle\DRS\sapdata5\drs620_6.
INFO 2007-02-04 21:46:32
Creating file system node D:\oracle\DRS/sapdata5\drs620_6 with type DIRECTORY succeeded.
INFO 2007-02-04 21:46:32
Creating directory D:\oracle\DRS\sapdata5\drs620_7.
INFO 2007-02-04 21:46:32
Creating file system node D:\oracle\DRS/sapdata5\drs620_7 with type DIRECTORY succeeded.
INFO 2007-02-04 21:46:32
Creating directory D:\oracle\DRS\sapdata6\drs620_8.
INFO 2007-02-04 21:46:32
Creating file system node D:\oracle\DRS/sapdata6\drs620_8 with type DIRECTORY succeeded.
INFO 2007-02-04 21:46:32
Creating directory D:\oracle\DRS\sapdata6\drs620_9.
INFO 2007-02-04 21:46:32
Creating file system node D:\oracle\DRS/sapdata6\drs620_9 with type DIRECTORY succeeded.
INFO 2007-02-04 21:46:32
Creating directory D:\oracle\DRS\sapdata6\drsusr_1.
INFO 2007-02-04 21:46:32
Creating file system node D:\oracle\DRS/sapdata6\drsusr_1 with type DIRECTORY succeeded.
INFO 2007-02-04 21:46:32
Creating directory D:\oracle\DRS\sapdata2\roll_1.
INFO 2007-02-04 21:46:32
Creating file system node D:\oracle\DRS/sapdata2\roll_1 with type DIRECTORY succeeded.
INFO 2007-02-04 21:46:32
Creating directory D:\oracle\DRS\sapdata3\temp_1.
INFO 2007-02-04 21:46:32
Creating file system node D:\oracle\DRS/sapdata3\temp_1 with type DIRECTORY succeeded.
INFO 2007-02-04 21:46:32
Creating directory D:\oracle\DRS\sapdata1\system_1.
INFO 2007-02-04 21:46:32
Creating file system node D:\oracle\DRS/sapdata1\system_1 with type DIRECTORY succeeded.
INFO 2007-02-04 21:46:32
Processing of all file system node operations of table tORA_SapdataNodes succeeded.
INFO 2007-02-04 21:46:33
Processing of all file system node operations of table tORA_DatabaseServerNodes succeeded.
INFO 2007-02-04 21:46:34
Processing of all file system node operations of table tORA_SapdataNodes succeeded.
INFO 2007-02-04 21:46:35
Creating file c:\oracle\ora90\database\initDRS.ora.
INFO 2007-02-04 21:46:36
Creating file C:\oracle\ora90\database\initDRS.sap.
INFO 2007-02-04 21:46:37
Copying file F:/sap4.7/ker/NT/COMMON/INSTALL/INITSID.DBA to: c:\oracle\ora90/database/initDRS.dba.
INFO 2007-02-04 21:46:37
Creating file c:\oracle\ora90\database\initDRS.dba.
INFO 2007-02-04 21:46:38
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 21:46:39
Moving file c:/oracle/ora90/database/initDRS.ora to: orig_init_ora_tmp.txt.
INFO 2007-02-04 21:46:39
Moving file C:/SAPinst ORACLE KERNEL/changed_init_ora_tmp.txt to: c:\oracle\ora90\database\initDRS.ora.
INFO 2007-02-04 21:46:39
Removing file C:/SAPinst ORACLE KERNEL/orig_init_ora_tmp.txt.
INFO 2007-02-04 21:46:40
Creating file C:\SAPinst ORACLE KERNEL\oradim.log.
INFO 2007-02-04 21:46:45
See 'c:\oracle\ora90/bin/oradim -new -sid DRS -STARTMODE auto' output in 'C:\SAPinst ORACLE KERNEL\oradim.log'.
INFO 2007-02-04 21:46:45
'c:\oracle\ora90/bin/oradim -new -sid DRS -STARTMODE auto' returned with '0'.
INFO 2007-02-04 21:46:46
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 21:46:49
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 21:59:57
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:00:00
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:00:44
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:00:46
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:01:31
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:01:34
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:02:18
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:02:20
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:03:06
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:03:09
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:03:55
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:03:57
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:04:44
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:04:46
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:05:32
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:05:35
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:06:21
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:06:23
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:07:10
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:07:12
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:07:58
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:08:01
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:08:48
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:08:50
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:09:38
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:09:40
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:09:44
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:09:46
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:10:06
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:10:09
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:10:39
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:10:41
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:10:44
Moving file c:/oracle/ora90/database/initDRS.ora to: orig_init_ora_tmp.txt.
INFO 2007-02-04 22:10:44
Moving file C:/SAPinst ORACLE KERNEL/changed_init_ora_tmp.txt to: c:\oracle\ora90\database\initDRS.ora.
INFO 2007-02-04 22:10:44
Removing file C:/SAPinst ORACLE KERNEL/orig_init_ora_tmp.txt.
INFO 2007-02-04 22:10:45
Creating file C:\SAPinst ORACLE KERNEL\lsnrctl.log.
INFO 2007-02-04 22:10:46
See 'c:\oracle\ora90/bin/lsnrctl stat' output in 'C:\SAPinst ORACLE KERNEL\lsnrctl.log'.
INFO 2007-02-04 22:10:46
'c:\oracle\ora90/bin/lsnrctl stat' returned with '3'.
INFO 2007-02-04 22:10:46
Creating file C:\SAPinst ORACLE KERNEL\lsnrctl.log.
INFO 2007-02-04 22:10:48
See 'c:\oracle\ora90/bin/lsnrctl start' output in 'C:\SAPinst ORACLE KERNEL\lsnrctl.log'.
INFO 2007-02-04 22:10:48
'c:\oracle\ora90/bin/lsnrctl start' returned with '0'.
INFO 2007-02-04 22:10:48
Copying file F:/sap4.7/ker/NT/COMMON/INSTALL/ORADBUSR.SQL to: ./oradbusr.sql.
INFO 2007-02-04 22:10:48
Creating file C:\SAPinst ORACLE KERNEL\oradbusr.sql.
INFO 2007-02-04 22:10:49
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:10:52
Changed working directory to C:\SAPinst ORACLE KERNEL.
PHASE 2007-02-04 22:10:54
Database Load
INFO 2007-02-04 22:10:58
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:10:59
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:11:00
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:11:01
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:11:01
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:11:01
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:11:01
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:11:01
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:11:01
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:11:01
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:11:01
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:11:01
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:11:01
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:11:01
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:11:01
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:11:02
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:11:02
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:11:02
Task files created
INFO 2007-02-04 22:11:03
Command files created
INFO 2007-02-04 22:11:05
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:11:05
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:11:05
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-05 00:06:44
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-05 03:43:19
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-05 04:55:23
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-05 05:17:24
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-05 05:39:25
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-05 05:45:25
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-05 05:57:26
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-05 06:00:26
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-05 06:03:26
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-05 06:05:26
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-05 06:07:26
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-05 06:08:27
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-05 06:09:28
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-05 06:24:46
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-05 06:24:46
Processes finished successfully
INFO 2007-02-05 06:26:23
Creating file C:\SAPinst ORACLE KERNEL\ddicora.sql.
INFO 2007-02-05 06:26:25
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-05 06:26:30
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-05 06:26:32
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-05 06:26:43
Moving file c:/oracle/ora90/database/initDRS.ora to: orig_init_ora_tmp.txt.
INFO 2007-02-05 06:26:43
Moving file C:/SAPinst ORACLE KERNEL/changed_init_ora_tmp.txt to: c:\oracle\ora90\database\initDRS.ora.
INFO 2007-02-05 06:26:43
Removing file C:/SAPinst ORACLE KERNEL/orig_init_ora_tmp.txt.
INFO 2007-02-05 06:26:43
Moving file c:/oracle/ora90/database/initDRS.ora to: orig_init_ora_tmp.txt.
INFO 2007-02-05 06:26:43
Moving file C:/SAPinst ORACLE KERNEL/changed_init_ora_tmp.txt to: c:\oracle\ora90\database\initDRS.ora.
INFO 2007-02-05 06:26:43
Removing file C:/SAPinst ORACLE KERNEL/orig_init_ora_tmp.txt.
INFO 2007-02-05 06:26:43
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-05 06:26:45
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-05 06:26:48
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-05 06:26:52
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-05 06:26:55
Creating file C:\SAPinst ORACLE KERNEL\brconnect.log.
INFO 2007-02-05 06:26:55
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-05 06:26:55
See 'D:\usr\sap\DRS\SYS\exe\run/brconnect -c -f crsyn -o SAPDRS' output in 'C:\SAPinst ORACLE KERNEL\brconnect.log'.
ERROR 2007-02-05 06:26:55
MOS-01012 PROBLEM: 'D:\usr\sap\DRS\SYS\exe\run/brconnect -c -f crsyn -o SAPDRS' returned with '128' which is not a defined as a success code.
ERROR 2007-02-05 06:26:55
FJS-00012 Error when executing script.
kindly help me where i am going wrong.
Yours friendly,
Bharath.Hi Andreas,
many thanks to you for the timely help.
a.)I want to know why there is an error at brconnect ? why is it returning an error code (128) at UPDATE DATABASE STATISTICS stage.
I have read in this forum itself that the UPDATE STATISTICS need not be suceesfully completed and we can edit database.r3s
" ..on the other hand you can easily invoke the update statistics after the installation has ended (succesfully!)...edit DATABASE.R3S (or the appropriate template file you are using) by changing the status=ERROR to status=OK...this will let you finish the installation..-GreetZ, AH."
I have searched for this file (database.r3s) in my system in vain Where can i find this file database.r3s?.
Have i done any configuration mistake at the pre-installation stage. I have installed Oracle 9.0 using setup.exe of oracle. should i use sapserver.cmd to install oracle?.I havent applied any patch for Oracle 9.0
Should I apply any patch just the same way we do for Oracle 8.1.x ?. If so, where can i get the patch for Oracle 9.0 .?.
b.) You said there should not be any spaces in file path (ex: C:/SAPinst ORACLE KERNEL/) . But I havent specified file path, the r/3 setup itself has created the directory path.
c.) I want to know one thing- should we create a database before installing r/3. When we are installing Oracle 8/9. x what are the components that we are installing?
Your friend,
Bharath. -
SAP INSTALLATION ECC6 WINDOWS 2003 ORACLE ERROR
while on the process of sap installation we are getting the error at phase 33 ie.java users creation phase.the error as follows.
1.
ERROR: CJS-30197.for more details see o/p of log file.but we do know where is that file.
2.FCO-00011 The step createJSF with step key.
pls tell us how to proceed.Thanks in advance.This is a known issue and the solution has been posted before in this forum. In short, you need to create the user manually in the backend system. Make sure to set the password for this user account to the same as you specified during "sapinst"
-
Error when start a SAP installation (SWPM) - Linux/Oracle
Hello,
I´m trying to install a SAP SCM system (NW 7.0 EHP3) in a linux (SLES 11) with a Oracle 11.2.0.3 but when I start the software provisioning manager (SWPM) it returns the following error:
sapsleora:/SAP/SWPM # ./sapinst
[==============================] | extracting... done!
SAPinst build information:
abi version: 722
make variant: 720_REL
build: 1482650
compile time: Mar 16 2014 16:11:13
make type: optu
codeline: 720-2_REL
platform: linuxx86_64
Exe directory: /tmp/sapinst_exe.13973.1395355025
guiengine: 2014-03-20 22:37:14 Waiting for client connection (1)
Starting GUIServer using:
SAPinst port : pipe:5:8
GUIServer port : 21212
GUI autostart : on
GUI mode : normal
command : /tmp/sapinst_exe.13973.1395355025/jre/bin/java -Xmx256M -Dsap.env.var.javahome=SAPINST_JRE_HOME -cp /tmp/sapinst_exe.13973.1395355025/JAR/instgui.jar SDTServer rootdir=/root/.sdtgui config=jar:sdtserver.xml guiport=21212 httpport=4239 -nolock -srvarg=/SAPinstService/host=127.0.0.1 -srvarg=/SAPinstService/port=pipe:5:8
load resource pool /SAP/SWPM/resourcepool.xml
Mar 20, 2014 10:37:16 PM [Info]: *************************
Mar 20, 2014 10:37:16 PM [Info]: Starting Server
Mar 20, 2014 10:37:17 PM [Error]: java.net.UnknownHostException: sapsleora: sapsleora
Mar 20, 2014 10:37:17 PM [Error]: java.net.UnknownHostException: sapsleora: sapsleora
Mar 20, 2014 10:37:17 PM [Error]: Error during configuration - see preceding messages.
Mar 20, 2014 10:37:17 PM [Fatal]: Error during controller startup.
Mar 20, 2014 10:37:17 PM [Fatal]: SL Controller exiting.
guiengine: No GUI server connected; waiting for a connection on host sapsleora, port 21212 to continue with the installation
The process that should run the SAPinst GUI could not be started. Please make sure that a JDK is installed on this host and that SAPINST_JRE_HOME points to the root directory of your Java installation. As an alternative you may start the GUI on another host (for details please consult the installation guide).
Java has been started with the following command line:
-Xmx256M -Dsap.env.var.javahome=SAPINST_JRE_HOME -cp /tmp/sapinst_exe.13973.1395355025/JAR/instgui.jar SDTServer rootdir=/root/.sdtgui config=jar:sdtserver.xml guiport=21212 httpport=4239 -nolock -srvarg=/SAPinstService/host=127.0.0.1 -srvarg=/SAPinstService/port=pipe:5:8
Can you help me to solve this error please?
Kind regards,
samid raifHi Samid,
The issue related with your host entries under /etc/hosts file .
java.net.UnknownHostException: sapsleora: sapsleora
The exception is really saying is that there is no known server with the name "local".As per me you're trying to connect to your local computer. Try with the hostname "localhost" instead, or perhaps 127.0.0.1/::1
Your host file entries would be like as below:
127.0.0.1 localhost.localdomain localhost
<IP-address of your server> <hostname of your system>
Save the host file & retry the SWPM.Hope this time you'll get the successful execution.
Regards,
Gaurav -
Hi sap installation getting error like sapgui not connectyed to localhost mechine
hi sap installation getting error like sapgui not connectyed to localhost mechine
Hi ,
Can you please update where did the installation fail and installation fail logs.
did you manually try to start sap? what does the start log say after staring up. did you install the system with some ip in the host file . Which os u are doing the install. is the data base process running.
Thanks
Rishi Abrol -
Errors During sap 4.7 installation-kindly help
Hi friends,
I am getting 3 errors during sap 4.7 installation.kindly help.
i herewwith giving the error details:-
1. R/3 Basis System Initialization DB-Connect Failed, Return code 000256
2. R/3 Basis System: operating system call Recv failed error no. 10054
3. R/3 Basis System: Database connection Disconnected.
After i have strated the sap server(MMC) first it will goto yellow and then green and againg goes to yellow color. message and dispatcher turned to gray.
Pls help.your advise is considered very useful
Thanks and Regards,
willaimWilliam
What OS are you using please? (Windows I assume) On the surface, it sounds like a socket error. (i.e. the message server port is blocked by an existing application).
The dispatcher will fail as a result of the message server not being available. Would you check and post the contents of the 'dev_ms" file in the work directory? Also, contents of the dev_disp would be helpful here also.
Thanks,
Tim -
SAP Installation RFC LOGON FAILED- SQl ERROR ON PROGRAM SPAM (SAPMSSY1)
Dear Gurus,
during the SAP installation, i got the RFC logon failed error: SQL Error on program SPAM (SAPMSSY1)
I am pasting the disp_w0 file.....................
http://www.4shared.com/file/89058633/ac7a0547/_2__dev_w0.html
pls let me know the how to lovve this.
the basic error is like....
Generating ABAP/4 Program SAPMS380 .
A Source SAPMS380 Line 8.
A Error Code GEN_SOURCE_FORMAT.
A Module $Id: //bas/620/src/krn/gen/screads.c#7 $ SAP.
A Function sc_getstring Line 624.
A Error when reading program SAPMS380
Its showing this kinda error for a max of program like SAPMSSY1, SAPMSSY2, SAPMS380 and lots more which are clearly depicted in disp_w0 file.
what is the error??? is there any error in program SAPMSSY1??
if this is true pls let me know hot to solve this? where i can access this SAPMSSY1 ?? remember i can not use any T-code like SE36 as my installation is not finished.
Kindly have a detail look on the disp_w0 file.
AbhishekHI
can u tell me how 2 acces the ABAP program like SAPMSSY1 etc. without entering into SAP by T-code.
as i can not login right now. i want to do certain changes in these programs.
Abhishek
Maybe you are looking for
-
CRM Availability Check not working for certain Item Category
Hi there, I have a situation where for certain order type/item category combinations, the availability check on the same material is not working. The check is set up to happen in SAP ECC. I have checked the config. under SPRO->CRM->Basic Functions->A
-
HT1338 How do I copy and paste a flyer from pages to the main body of the e-mail
How do I copy and paste a flyer that was designed in pages to the main body of the e-mail
-
New here and need help with FX1 and FCE
Hey all - I shot a lot of video this last summer on a Sony FX1 in HDV. I am capturing the video using FCE. I have my Easy set up for HD, 29.97, and HDV - AIC 1080i60. I am in the US not using PAL. I can capture the video fine, and export to quicktime
-
BPEL- How to make part of Jdeveloper 11g
HI, In Jdeveloper 10g BPEL was part of it. But with new release Jdeveloper 11g it has been disabled(No more part of Jdeveloper). How can we get this. Should we purchase license or it is available for download. any one please guide in this regard M Ni
-
Error in CUP " Role Search" type of access as transaction
Hello This has been talked about for a Role in this thread. Error in CUP " Role Search" When the approver want to select an Role by clicking the select role tab and then select the type of access as transaction I get No Records Found. I do get when I