Error at the time of Collective billing

I am getting an error message "TE507_05    does not exist" at the time of create collective bill using Tcode "EA10_COLL"
Please advice.
Satya

This means that you are missing configuration for CB document type in FICA. SPRO->Contract Accts receivable and payable->Basic functions->Postings and Documents->Document->Document types->Allocate number range groups for Nota Fiscal.
Refer to IMG Documentation - You define the document types for collective bill creation. You can maintain the document types for clearing, interest calculation, and cash security deposit interest calculation documents, as well as bills from SD billing documents and debit entry documents.

Similar Messages

  • Error in output determination via collective billing VF06

    Hi,
    We are facing error in output determination when collective billing is done. Multiple Orders numbers are entered in VF06 and processed to generate billing documents. VF06, which is used for batch billing, creates a batch job which internally calls VF04 to do this. For some of the invoices generated from the documents, we do not have anything in the Output, i.e. when we open the invoices in VF03 and go to Goto->Header ->Output, nothing appears.
    Say out of the 5 documents, 2 should have output determined and 3 do not. Then we see that it appears for either of the 2 or does not appear at all.
    This does not happens when the documents are processed one by one in VF04. We have to do collective billing and generate one invoice for each document. The condition records are also maintained correctly.
    Regards,
    Tarun

    Go to some of the invoices on which no output has appeared in change mode and do a output determination analysis in Go to Header-Output and then Ouptut Determinatino analysis.
    Please do this analysis for atleast 10 problamatic invoices. This will give yousome insight into the problem

  • Update termination error at the time of order creation and chamge?

    Dear gurus,
    Facing an error at the time of creation of order.
    system is giving update termination error & when we are going in change mode of that order system is giving an error message " SD document XXXX is not in the database or has been achieved"
    please treat on priority
    regards,
    krai

    Hi,
    Goto ST22 T.Code and analyse the error.The error message why it is terminated will be displayed here.
    Or go to SBWP T.Code in the user where you got this error and check the inbox.
    It will display why the error is appearing.
    Show the same to the ABAPer and ask them to work on it.
    I think your server may be slow and it will take some time to update the order created by you.But I am not sure.Check the error message.
    Regards,
    Krishna.

  • Funds Mangement - Fund center derivation error at the time of PO/MIGO

    Hello -
    Generally ,If FM account assignements are available in purchase requisition , same should be carried to purchase order and to the good receipts. But I am getting an error at the time of PO or MIGO that " Fund center not derived'. Why this happening ? What can I do to avoid this problem. can I create a step in the derivation to keep the original FM assignments from the previous documents....is there something to do with field status??
    Thanks in Advance
    Chris

    Hi
    Please read carefully tye warehouse concept
    Excample warehouse concept II
    >At PR no FM update
    >At PO no FM update
    >AT GR no FM update
    >AT consumption on Cost center, WBS or Internal order FM is updated and AVC is checked
    Read the release note of ERP 6 or ERP5 the customising of Warehouse concept is well explained
    In sumary:
    Create a stock commitment item statistically
    Create a warehouse funds center
    Create a funds
    Create a derivation rule for warehouse concept 2
    Create a derivation rule where you have plant, valuation class and warehouse funds center
    Cretae a derivation rule fund>warehouse funds center>stock commitment item
    Go in customising integration to make field status for assignement FM account asignments
    Select PO and PR and make optional the funds, funds cenbter, commitment item
    And when you will create a PR or PO FM data will come automatically
    ciao
    Salvator
    PSM-FM Consultant
    BXL

  • Update termination error at the time of order creation

    Dear gurus,
    Facing an error at the time of creation of order.
    system is giving update termination error & when we are going in change mode of that order system is giving an error message " SD document XXXX is not in the database or has been achieved"
    please treat on priority
    regards,
    krai

    Hello ,
    "Update terminated " error has two reasongs.
    First is system update  was not active and hence terminated
    For this to check Goto the transaction code SM13  and  check whether the SYSTEM UPDATE is active or not.
    If it is active ,
    Then click on the Option TOBE updated in the status  and execute, then in the next screen you can find some list of documents that are not updated and causing error .
    Click on MODULES in the screen and find the erro which causing this error.
    Most this kind of error will happen if something in the Funcion Module or USER EXIT is missing.
    Please check and revert back if you need further details
    Also check the link
    http://help.sap.com/saphelp_nw04/helpdata/en/e5/de870535cd11d3acb00000e83539c3/frameset.htm
    regards,
    santosh

  • Error at the time of PR creation

    I am facing a Error at the time of PR creation:-
    Status "Material Inactive" of material 30001668 does not allow external procurement
    Message no. ME053
    how to active the material.

    you have a material status in your material master, either at plant level or at general level.
    Just remove the status.
    Plant level status can be found in almost any plant view,
    general level in general data view

  • Error at the time of GR/IR Clearing

    Hi,
    I am getting the following error at the time of manual clearing-F-03 or automatic clearing F.13
    Document splitting: Items for clearing 1000/5000000001/2010/002 not found
    Message no. GLT0002
    Diagnosis
    Document splitting cannot perform clearing because it was not possible to find complete splitting information on the items to be cleared (company code 1000, document number 5000000001, fiscal year 2010, item 002).
    System Response
    Clearing cannot be performed and the document cannot be posted.
    Procedure
    Exclude the affected item from clearing.
    It may be that this item was not posted with active document splitting. In this case, this item or document would have to be migrated.
    Kindly provide the solution.
    Regards,
    Hansa Chechani
    Edited by: Hansachechani on Sep 2, 2010 6:58 AM

    Hi Raheem,
    I am running transaction code f.13 GR/IR clearing account.  We have maintianed 3 three currencies. 1st AED-co code currency, 2nd usd- parallel currency, 3rd INR- parallel currency.  At the time of clearing system is giving above error of account requires an assignment to a co object for GL account of Exchange Gain/Loss account.  The exchange rate difference is coming for the 2nd currency ie USD.  In the leading ledger there is no problem.  We have done the setting in OKB9 and assigned the co object for Gl account of Exchange gain and loss.  Hope you have understood the issue.  Is there any solution apart from the setting in OKB9.
    Mahesh

  • Coherence Error at the time of Starting weblogic Server

    Hi ,
    I am getting below error at the time of starting Weblogic OSB managed server
    We are using osb_cluster1 (Unicast) for osb_server1 managed server.
    When Weblogic server try to start the managed server we get following Coherence errors and startup scripts try to point to Oracle Coherence 3.6.0.4.(its mainly happening in starting osb_server1 managed server, this error is not appearing during soa_server1 managed server start)
    We don't want to use the coherence at all, we are trying to disable the coherence feature, but hardly getting any success in it, every time during server start-up following error appears.
    Let me know if you have any solution to it.
    ####<Mar 5, 2012 9:18:55.424 AM > <Warning> <Coherence> <sjsj-idm.kuy.co.wo> <osb_server1> <Logger@406289568 3.6.0.4> <<anonymous>> <> <3976a80e38d52337:-f13ff44:135df5aa8b6:-8000-0000000000000007> <1330892335424> <BEA-000000> <Oracle Coherence 3.6.0.4 (member=n/a): This Member(Id=0, Timestamp=2012-03-05 09:18:23.752, Address=11.49.63.33:7880, MachineId=31265, Location=site:kuy.co.wo,machine:deap-idm01,process:10629, Role=OSB-node) has been attempting to join the cluster using WKA list [sjsj-idm.kuy.co.wo/11.49.63.33:9003] for 31 seconds without success; this could indicate a mis-configured WKA, or it may simply be the result of a busy cluster or active failover.>
    ####<Mar 5, 2012 9:18:55.425 AM > <Warning> <Coherence> <sjsj-idm.kuy.co.wo> <osb_server1> <Logger@406289568 3.6.0.4> <<anonymous>> <> <3976a80e38d52337:-f13ff44:135df5aa8b6:-8000-0000000000000007> <1330892335425> <BEA-000000> <Oracle Coherence 3.6.0.4 (member=n/a): Delaying formation of a new cluster; waiting for well-known nodes to respond>
    ####<Mar 5, 2012 9:22:58.769 AM > <Error> <Coherence> <sjsj-idm.kuy.co.wo> <osb_server1> <Logger@406289568 3.6.0.4> <<anonymous>> <> <3976a80e38d52337:-f13ff44:135df5aa8b6:-8000-0000000000000007> <1330892578769> <BEA-000000> <Oracle Coherence 3.6.0.4 (member=n/a): Detected soft timeout) of {WrapperGuardable Guard{Daemon=IpMonitor} Service=ClusterService{Name=Cluster, State=(SERVICE_STARTED, STATE_ANNOUNCE), Id=0, Version=3.6}}>
    ####<Mar 5, 2012 9:22:58.770 AM > <Warning> <Coherence> <sjsj-idm.kuy.co.wo> <osb_server1> <Logger@406289568 3.6.0.4> <<anonymous>> <> <3976a80e38d52337:-f13ff44:135df5aa8b6:-8000-0000000000000007> <1330892578770> <BEA-000000> <Oracle Coherence 3.6.0.4 (member=n/a): Attempting recovery of Guard{Daemon=IpMonitor}>
    ####<Mar 5, 2012 9:23:25.530 AM > <Error> <Coherence> <sjsj-idm.kuy.co.wo> <osb_server1> <Logger@406289568 3.6.0.4> <<anonymous>> <> <3976a80e38d52337:-f13ff44:135df5aa8b6:-8000-0000000000000007> <1330892605530> <BEA-000000> <Oracle Coherence 3.6.0.4 (member=n/a): Failure to join a cluster for 301 seconds; stopping cluster service.>
    ####<Mar 5, 2012 9:23:25.879 AM > <Error> <Coherence> <sjsj-idm.kuy.co.wo> <osb_server1> <Logger@406289568 3.6.0.4> <<anonymous>> <> <3976a80e38d52337:-f13ff44:135df5aa8b6:-8000-0000000000000007> <1330892605879> <BEA-000000> <Oracle Coherence 3.6.0.4 (member=n/a): Error while starting cluster: com.tangosol.net.RequestTimeoutException: Timeout during service start: ServiceInfo(Id=0, Name=Cluster, Type=Cluster
    MemberSet=ServiceMemberSet(
    OldestMember=n/a
    ActualMemberSet=MemberSet(Size=0, BitSetCount=0
    MemberId/ServiceVersion/ServiceJoined/MemberState
    at com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.onStartupTimeout(Grid.CDB:6)
    at com.tangosol.coherence.component.util.daemon.queueProcessor.Service.start(Service.CDB:28)
    at com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.start(Grid.CDB:6)
    at com.tangosol.coherence.component.net.Cluster.onStart(Cluster.CDB:637)
    at com.tangosol.coherence.component.net.Cluster.start(Cluster.CDB:11)
    at com.tangosol.coherence.component.util.SafeCluster.startCluster(SafeCluster.CDB:4)
    at com.tangosol.coherence.component.util.SafeCluster.restartCluster(SafeCluster.CDB:7)
    at com.tangosol.coherence.component.util.SafeCluster.ensureRunningCluster(SafeCluster.CDB:26)
    at com.tangosol.coherence.component.util.SafeCluster.start(SafeCluster.CDB:2)
    at com.tangosol.net.CacheFactory.ensureCluster(CacheFactory.java:998)
    at com.bea.alsb.coherence.impl.CoherenceProvider.<init>(CoherenceProvider.java:45)
    at com.bea.alsb.coherence.impl.CoherenceProviderFactory.newInstance(CoherenceProviderFactory.java:21)
    at com.bea.alsb.coherence.init.CoherenceAppListener.preStart(CoherenceAppListener.java:45)
    at weblogic.application.internal.flow.BaseLifecycleFlow$PreStartAction.run(BaseLifecycleFlow.java:282)
    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
    at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
    at weblogic.application.internal.flow.BaseLifecycleFlow$LifecycleListenerAction.invoke(BaseLifecycleFlow.java:199)
    at weblogic.application.internal.flow.BaseLifecycleFlow.preStart(BaseLifecycleFlow.java:62)
    at weblogic.application.internal.flow.HeadLifecycleFlow.prepare(HeadLifecycleFlow.java:284)
    at weblogic.application.internal.BaseDeployment$1.next(BaseDeployment.java:614)
    at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:54)
    at weblogic.application.internal.BaseDeployment.prepare(BaseDeployment.java:184)
    at weblogic.application.internal.EarDeployment.prepare(EarDeployment.java:58)
    at weblogic.application.internal.DeploymentStateChecker.prepare(DeploymentStateChecker.java:154)
    at weblogic.deploy.internal.targetserver.AppContainerInvoker.prepare(AppContainerInvoker.java:60)
    at weblogic.deploy.internal.targetserver.AppDeployment.prepare(AppDeployment.java:141)
    at weblogic.management.deploy.internal.DeploymentAdapter$1.doPrepare(DeploymentAdapter.java:39)
    at weblogic.management.deploy.internal.DeploymentAdapter.prepare(DeploymentAdapter.java:191)
    at weblogic.management.deploy.internal.AppTransition$1.transitionApp(AppTransition.java:22)
    at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)
    at weblogic.management.deploy.internal.ConfiguredDeployments.prepare(ConfiguredDeployments.java:166)
    at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:122)
    at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:181)
    at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:97)
    at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:176)>
    Edited by: 858026 on Mar 4, 2012 6:21 PM
    Edited by: 858026 on Mar 4, 2012 6:23 PM

    Hi NJ,
    In WL console while setting up cluster I have given Messaging
    Mode to Unicast,
    By default Multicast address and ports comes up
    Multicast Address - 239.192.0.0,
    Multicast Port- 7001
    I have modified the override file but still getting given error logs while server startup and its trying to look for override file in Oracle Coherence 3.6.0.4/coherence.jar
    <!DOCTYPE coherence SYSTEM ""coherence.dtd"">
    <coherence>
    <cluster-config>
         <!-- By default, this is using a multicast listener for cluster discovery, etc.
              If you wish to use a unicast listener:
              - update the entries in /coherence/unicast-listener/well-known-addresses/socket for each member of the cluster
                   (or specify the corresponding system properties)
              - set the /coherence/unicast-listener/address to the host name of this machine
              See http://coherence.oracle.com/display/COH35UG/well-known-addresses for more details. -->
         <unicast-listener>
              <well-known-addresses>
                   <socket-address id=""1"">
                        <address system-property=""OSB.coherence.wka1""></address>
                        <port system-property=""OSB.coherence.wka1.port""></port>
                   </socket-address>
                   <socket-address id=""2"">
                        <address system-property=""OSB.coherence.wka2""></address>
                        <port system-property=""OSB.coherence.wka2.port""></port>
                   </socket-address>
                   <socket-address id=""3"">
                        <address system-property=""OSB.coherence.wka3""></address>
                        <port system-property=""OSB.coherence.wka3.port""></port>
                   </socket-address>
                   <socket-address id=""4"">
                        <address system-property=""OSB.coherence.wka4""></address>
                        <port system-property=""OSB.coherence.wka4.port""></port>
                   </socket-address>
                   <socket-address id=""5"">
                        <address system-property=""OSB.coherence.wka5""></address>
                        <port system-property=""OSB.coherence.wka5.port""></port>
                   </socket-address>
                   <socket-address id=""6"">
                        <address system-property=""OSB.coherence.wka6""></address>
                        <port system-property=""OSB.coherence.wka6.port""></port>
                   </socket-address>
                   <socket-address id=""7"">
                        <address system-property=""OSB.coherence.wka7""></address>
                        <port system-property=""OSB.coherence.wka7.port""></port>
                   </socket-address>
                   <socket-address id=""8"">
                        <address system-property=""OSB.coherence.wka8""></address>
                        <port system-property=""OSB.coherence.wka8.port""></port>
                   </socket-address>
                   <socket-address id=""9"">
                        <address system-property=""OSB.coherence.wka9""></address>
                        <port system-property=""OSB.coherence.wka9.port""></port>
                   </socket-address>
              </well-known-addresses>
                   <address system-property=""OSB.coherence.localhost"">127.0.0.1</address>
                   <port system-property=""OSB.coherence.localport"">7890</port>
              </unicast-listener>
              <multicast-listener>
                   <address system-property=""OSB.coherence.clusteraddress"">239.192.0.0</address>
                   <port system-property=""OSB.coherence.clusterport"">7001</port>
              </multicast-listener>
         </cluster-config>
    </coherence>
    ####<Mar 6, 2012 3:00:44.050 PM NZDT> <Notice> <StdErr> <dete-idm01.hnz.co.nz> <osb_server1> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1330999244050> <BEA-000000> <2012-03-06 15:00:44.015 Oracle Coherence 3.6.0.4 <Info> (thread=[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'): Loaded operational configuration from "zip:/u01/app/oracle/product/OSB11.1.1.4/oracle_common/modules/oracle.coherence_3.6/coherence.jar!/tangosol-coherence.xml">
    ####<Mar 6, 2012 3:00:44.053 PM NZDT> <Notice> <StdErr> <dete-idm01.hnz.co.nz> <osb_server1> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1330999244053> <BEA-000000> <2012-03-06 15:00:44.029 Oracle Coherence 3.6.0.4 <Info> (thread=[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'): Loaded operational overrides from "zip:/u01/app/oracle/product/OSB11.1.1.4/oracle_common/modules/oracle.coherence_3.6/coherence.jar!/tangosol-coherence-override-dev.xml">
    ####<Mar 6, 2012 3:00:44.053 PM NZDT> <Notice> <StdErr> <dete-idm01.hnz.co.nz> <osb_server1> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1330999244053> <BEA-000000> <2012-03-06 15:00:44.030 Oracle Coherence 3.6.0.4 <Info> (thread=[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'): Loaded operational overrides from "zip:/u01/app/oracle/product/OSB11.1.1.4/user_projects/domains/OSBD/servers/osb_server1/tmp/_WL_user/ALSB Coherence Cache Provider/yannht/APP-INF/lib/com.bea.alsb.coherence-impl.jar!/tangosol-coherence-override.xml">
    ####<Mar 6, 2012 3:00:44.073 PM NZDT> <Error> <OSB Coherence WebLogic> <dete-idm01.hnz.co.nz> <osb_server1> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <0ed5cc20267507d3:a44cfd4:135e5bc3642:-8000-0000000000000003> <1330999244073> <BEA-2032481> <Unable to initialize OSB Coherence Cache Provider because there was an error starting Coherence:
    com.bea.alsb.coherence.impl.ConfigurationException: Error starting Coherence from cache configuration file /coherence/osb-coherence-cache-config.xml:
    (Wrapped) java.lang.reflect.InvocationTargetException
         at com.tangosol.util.Base.ensureRuntimeException(Base.java:293)
         at com.tangosol.util.Base.ensureRuntimeException(Base.java:269)
         at com.tangosol.net.CacheFactory.getServiceConfig(CacheFactory.java:1355)
         at com.tangosol.net.CacheFactory.getCacheFactoryBuilderConfig(CacheFactory.java:1231)
         at com.tangosol.net.CacheFactory.getCacheFactoryBuilder(CacheFactory.java:593)
         at com.bea.alsb.coherence.impl.CoherenceProvider.<init>(CoherenceProvider.java:42)
         at com.bea.alsb.coherence.impl.CoherenceProviderFactory.newInstance(CoherenceProviderFactory.java:21)
         at com.bea.alsb.coherence.init.CoherenceAppListener.preStart(CoherenceAppListener.java:45)
         at weblogic.application.internal.flow.BaseLifecycleFlow$PreStartAction.run(BaseLifecycleFlow.java:282)
         at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
         at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
         at weblogic.application.internal.flow.BaseLifecycleFlow$LifecycleListenerAction.invoke(BaseLifecycleFlow.java:199)
         at weblogic.application.internal.flow.BaseLifecycleFlow.preStart(BaseLifecycleFlow.java:62)
         at weblogic.application.internal.flow.HeadLifecycleFlow.prepare(HeadLifecycleFlow.java:283)
         at weblogic.application.internal.BaseDeployment$1.next(BaseDeployment.java:613)
         at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
         at weblogic.application.internal.BaseDeployment.prepare(BaseDeployment.java:184)
         at weblogic.application.internal.EarDeployment.prepare(EarDeployment.java:58)
         at weblogic.application.internal.DeploymentStateChecker.prepare(DeploymentStateChecker.java:154)
         at weblogic.deploy.internal.targetserver.AppContainerInvoker.prepare(AppContainerInvoker.java:60)
         at weblogic.deploy.internal.targetserver.AppDeployment.prepare(AppDeployment.java:141)
         at weblogic.management.deploy.internal.DeploymentAdapter$1.doPrepare(DeploymentAdapter.java:39)
         at weblogic.management.deploy.internal.DeploymentAdapter.prepare(DeploymentAdapter.java:191)
         at weblogic.management.deploy.internal.AppTransition$1.transitionApp(AppTransition.java:21)
         at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)
         at weblogic.management.deploy.internal.ConfiguredDeployments.prepare(ConfiguredDeployments.java:165)
         at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:122)
         at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:180)
         at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:96)
         at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:176)
    Caused by: java.lang.reflect.InvocationTargetException
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:597)
         at com.tangosol.net.CacheFactory.getServiceConfig(CacheFactory.java:1350)
         ... 29 more
    Caused by: (Wrapped: Failed to apply the element override: /tangosol-coherence-override-dev.xml) (Wrapped: Failed to apply the element override: /tangosol-coherence-override.xml) (Wrapped: Failed to apply the element override: /coherence/osb-coherence-override.xml) (Wrapped) java.io.IOException: Exception occurred during parsing: looking for id=10, found id=1((0,29,13) Name coherence.dtd)
         at com.tangosol.util.Base.ensureRuntimeException(Base.java:293)
         at com.tangosol.coherence.component.application.console.Coherence.loadOverrides(Coherence.CDB:83)
         at com.tangosol.coherence.component.application.console.Coherence.loadConfiguration(Coherence.CDB:46)
         at com.tangosol.coherence.component.application.console.Coherence.getServiceConfig(Coherence.CDB:14)
         at com.tangosol.coherence.component.application.console.Coherence.ensureRunningLogger(Coherence.CDB:10)
         at com.tangosol.coherence.component.application.console.Coherence.getSafeCluster(Coherence.CDB:14)
         at com.tangosol.coherence.component.application.console.Coherence.getServiceConfig(Coherence.CDB:8)
         ... 34 more
    Caused by: (Wrapped: Failed to apply the element override: /tangosol-coherence-override.xml) (Wrapped: Failed to apply the element override: /coherence/osb-coherence-override.xml) (Wrapped) java.io.IOException: Exception occurred during parsing: looking for id=10, found id=1((0,29,13) Name coherence.dtd)
         at com.tangosol.util.Base.ensureRuntimeException(Base.java:293)
         at com.tangosol.coherence.component.application.console.Coherence.loadOverrides(Coherence.CDB:83)
         at com.tangosol.coherence.component.application.console.Coherence.loadOverrides(Coherence.CDB:64)
         ... 39 more
    Caused by: (Wrapped: Failed to apply the element override: /coherence/osb-coherence-override.xml) (Wrapped) java.io.IOException: Exception occurred during parsing: looking for id=10, found id=1((0,29,13) Name coherence.dtd)
         at com.tangosol.util.Base.ensureRuntimeException(Base.java:293)
         at com.tangosol.coherence.component.application.console.Coherence.loadOverrides(Coherence.CDB:83)
         at com.tangosol.coherence.component.application.console.Coherence.loadOverrides(Coherence.CDB:64)
         ... 40 more
    Caused by: (Wrapped) java.io.IOException: Exception occurred during parsing: looking for id=10, found id=1((0,29,13) Name coherence.dtd)
         at com.tangosol.run.xml.XmlHelper.loadXml(XmlHelper.java:120)
         at com.tangosol.run.xml.XmlHelper.loadXml(XmlHelper.java:155)
         at com.tangosol.coherence.component.application.console.Coherence.loadOverrides(Coherence.CDB:41)
         at com.tangosol.coherence.component.application.console.Coherence.loadOverrides(Coherence.CDB:64)
         at com.tangosol.coherence.component.application.console.Coherence.loadOverrides(Coherence.CDB:64)
         at com.tangosol.coherence.component.application.console.Coherence.loadConfiguration(Coherence.CDB:46)
         at com.tangosol.coherence.component.application.console.Coherence.getServiceConfig(Coherence.CDB:14)
         at com.tangosol.coherence.component.application.console.Coherence.ensureRunningLogger(Coherence.CDB:10)
         at com.tangosol.coherence.component.application.console.Coherence.getSafeCluster(Coherence.CDB:16)
         at com.tangosol.coherence.component.application.console.Coherence.getServiceConfig(Coherence.CDB:8)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:597)
         at com.tangosol.net.CacheFactory.getServiceConfig(CacheFactory.java:1350)
         at com.tangosol.net.CacheFactory.getCacheFactoryBuilderConfig(CacheFactory.java:1231)
         at com.tangosol.net.CacheFactory.getCacheFactoryBuilder(CacheFactory.java:593)
         at com.bea.alsb.coherence.impl.CoherenceProvider.<init>(CoherenceProvider.java:42)
         at com.bea.alsb.coherence.impl.CoherenceProviderFactory.newInstance(CoherenceProviderFactory.java:21)
         at com.bea.alsb.coherence.init.CoherenceAppListener.preStart(CoherenceAppListener.java:45)
         at weblogic.application.internal.flow.BaseLifecycleFlow$PreStartAction.run(BaseLifecycleFlow.java:282)
         at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
         at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
         at weblogic.application.internal.flow.BaseLifecycleFlow$LifecycleListenerAction.invoke(BaseLifecycleFlow.java:199)
         at weblogic.application.internal.flow.BaseLifecycleFlow.preStart(BaseLifecycleFlow.java:62)
         at weblogic.application.internal.flow.HeadLifecycleFlow.prepare(HeadLifecycleFlow.java:284)
         at weblogic.application.internal.BaseDeployment$1.next(BaseDeployment.java:614)
         at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:54)
         at weblogic.application.internal.BaseDeployment.prepare(BaseDeployment.java:184)
         at weblogic.application.internal.EarDeployment.prepare(EarDeployment.java:58)
         at weblogic.application.internal.DeploymentStateChecker.prepare(DeploymentStateChecker.java:154)
         at weblogic.deploy.internal.targetserver.AppContainerInvoker.prepare(AppContainerInvoker.java:60)
         at weblogic.deploy.internal.targetserver.AppDeployment.prepare(AppDeployment.java:141)
         at weblogic.management.deploy.internal.DeploymentAdapter$1.doPrepare(DeploymentAdapter.java:39)
         at weblogic.management.deploy.internal.DeploymentAdapter.prepare(DeploymentAdapter.java:191)
         at weblogic.management.deploy.internal.AppTransition$1.transitionApp(AppTransition.java:22)
         at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)
         at weblogic.management.deploy.internal.ConfiguredDeployments.prepare(ConfiguredDeployments.java:166)
         at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:122)
         at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:181)
         at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:97)
         ... 3 more
    Caused by: java.io.IOException: Exception occurred during parsing: looking for id=10, found id=1((0,29,13) Name coherence.dtd)
         at com.tangosol.run.xml.SimpleParser.parseXml(SimpleParser.java:134)
         at com.tangosol.run.xml.SimpleParser.parseXml(SimpleParser.java:71)
         at com.tangosol.run.xml.SimpleParser.parseXml(SimpleParser.java:84)
         at com.tangosol.run.xml.XmlHelper.loadXml(XmlHelper.java:116)
         ... 43 more
    The error can be caused by one of the following:
    1) The operational configuration file is invalid (see $DOMAIN_DIR$/config/osb/coherence/osb-coherence-override.xml)
    2) The cache configuration file is invalid (see $DOMAIN_DIR$/config/osb/coherence/osb-coherence-cache-config.xml)>

  • Budget Error at the time of Release of Purchase order

    Hi,
    We are using former budgeting and getting budget payment budget exceeding error at the time of releasing a carry forward PO.
    PO has been successfully carried forward to next year and we are not making any changes in the PO. While releasing the same via ME28, system is giving budget exceeding error.
    Screens shot is attached herewith for reference.
    Thanks in advance.

    Hi Mar,
    The root cause of the issue is incorrect updation of taxes value in EKPO table for that PO, which causes the system to consume less budget at the time of saving of PO.
    Now while releasing the PO, system is checking for whole tax amount and sufficient budget is not available in the budget address.
    Hope you able to connect the issue.....:P
    Regards
    Rohit Chopra

  • Error at the time of posting goods by using 561 movement type

    Hi All
    I am getting the following error at the time of doing MB1C tcode..
    Fld selectn for mvmt type 561 / acct 10001 differs for Ext. GA amount in LC (023)..
    Kindly help..
    Rgds,
    Pavan.

    Hi,
    Simply go to OMJJ
    Go to movement type 561
    Then double click on FIELD SELECTION (from 201)/batch search procedure
    Then select your relevant movement and click on DETAIL
    Then go to or double click on MATERIALS MANAGEMENT then you will see field Ext. GA amount in LC  tickmark to SUPRESS and save
    Kapil

  • Error at the time of execution using weblogic10

    Hi All,
              i am new in the implementetion of weblogic10. anyhow i am able to deploy the message driven bean application successfully, but getting the following errors at the time of execution:
              Error 500--Internal Server Error
              java.lang.NullPointerException
                   at jsp_servlet.__calculator._jspService(__calculator.java:137)
                   at weblogic.servlet.jsp.JspBase.service(JspBase.java:34)
                   at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:226)
                   at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:124)
                   at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:283)
                   at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:175)
                   at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3370)
                   at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
                   at weblogic.security.service.SecurityManager.runAs(Unknown Source)
                   at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2117)
                   at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2023)
                   at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1359)
                   at weblogic.work.ExecuteThread.execute(ExecuteThread.java:200)
                   at weblogic.work.ExecuteThread.run(ExecuteThread.java:172)
              so requesting all members of bea to suggest me what to do?
              regards
              mina

    hi,
              in the total application i ve nt used calculator.java anywhere. my client file is as following:
              <%@ page import="example.*, javax.naming.*, javax.jms.Queue, java.text.*,javax.jms.*,java.sql.Timestamp"%>
              <%
              if ("send".equals(request.getParameter ("action"))) {
              QueueConnection cnn = null;
              QueueSender sender = null;
              QueueSession sess = null;
              Queue queue = null;
              try {
              InitialContext ctx = new InitialContext();
              queue = (Queue) ctx.lookup("java:comp/env/jms/testQueue");
              QueueConnectionFactory factory =
              (QueueConnectionFactory) ctx.lookup("java:comp/env/jms/connectionFactory");
              cnn = factory.createQueueConnection();
              sess = cnn.createQueueSession(false,
              QueueSession.AUTO_ACKNOWLEDGE);
              } catch (Exception e) {
              e.printStackTrace ();
              TextMessage msg = sess.createTextMessage(
              request.getParameter ("start") + "," +
              request.getParameter ("end") + "," +
              request.getParameter ("growthrate") + "," +
              request.getParameter ("saving")
              // The sent timestamp acts as the message's ID
              long sent = System.currentTimeMillis();
              msg.setLongProperty("sent", sent);
              sender = sess.createSender(queue);
              sender.send(msg);
              // sess.commit ();
              sess.close ();
              %>
              <html>
              <head><meta http-equiv="REFRESH" content="3;URL=check.jsp?sent=<%=sent%>"></head>
              <body>
              Please wait while I am checking whether the message has arrived.
              Go back to Calculator
              </body>
              </html>
              <%
              return;
              } else {
              int start = 25;
              int end = 65;
              double growthrate = 0.08;
              double saving = 300.0;
              %>
              <html>
              <body>
              <p>Investment calculator
              <form action="calculator.jsp" method="POST">
              <input type="hidden" name="action" value="send">
              <b> Start age = <input type="text" name="start" value="<%=start%>">
              End age = <input type="text" name="end" value="<%=end%>">
              Annual Growth Rate = <input type="text" name="growthrate" value="<%=growthrate%>">
              Montly Saving = <input type="text" name="saving" value="<%=saving%>"></b>
              <input type="submit" value="Calculate">
              <INPUT type="button" value="Close Window" onClick="window.close()">
              </form>
              </p>
              </body>
              </html>
              <%
              return;
              %>
              please check out my JNDI name in this program, and suggest me what to do.
              Thanks
              Minakshi

  • Abap run time error at the time of GR

    I am facing a ABAP run time error at the time of  GR of STO through MIGO_GR, then abap run time error is generated, details are given as per the Tcode:- ST22;
    Runtime Error          MESSAGE_TYPE_X
    ShrtText
       The current application triggered a termination with a short dump.
    What happened?
       The current application program detected a situation which really
        should not occur. Therefore, a termination with a short dump was
        triggered on purpose by the key word MESSAGE (type X).
    Transaction
       Transaction......... "MIGO "
       Program............. "SAPLMBWL"
       Screen.............. "SAPLMIGO 0001"
       Screen line......... 15
    Information on where terminated
         The termination occurred in the ABAP program "SAPLMBWL" in
         "MB_POST_GOODS_MOVEMENT".
         The main program was "SAPLMIGO ".
         The termination occurred in line 56 of the source code of the (Include)
         program "LMBWLU21"
         of the source code of program "LMBWLU21" (when calling the editor 560).
    Source Code Extract
         55    IF NOT sy-subrc IS INITIAL.
    >>>>>       MESSAGE ID sy-msgid TYPE x NUMBER sy-msgno WITH            "385830
         57                  sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.

    Hi Tiwari,
    The error seems to be triggered by note 385830. Pls refer to 'Note 556000 - Short dump due to note 385830' in www.service.sap.com
    Btw, which version are you in?
    Best Regards
    Sathees Gopalan

  • Error at the time of Release of Cost Estimate

    Hi All,
    During the relase of Costing Run, we encountered with below error:
    Valuation data for material X190191302 is locked by the user SOOKKWANC
    Message no. M3024
    We are getting the same error at the time of CK24..also checked the log in of this user ID:SOOKKWANC but found that this user is not accessing any t-code.
    Please help.
    Thanks..
    Regards,
    Vivek

    Dear Vivek,
    When releasing same material might be used in another transction by another user
    At this point of time material gets locked
    Kindly un-lock ( Delete ) the entries in SM12
    Then proceed you issue will be solved
    Regards
    Madhu

  • Error at the time of MIGO- not reading the excise base from invoice

    hi gurus
    when we do inward the material during sto using migo, the following error occurs Error at the time of MIGO- not reading the excise base from invoice
    kindly suggest right answers to overcome this?
    with regards
    baalakrushnan.da

    hi,
    Go to logistics general and see whether for the excise group migo settings are maintained.
    See for the material in depot chapter id and excise indicators are maintained ie J1ID.
    since depot also considered as plant so the chapter id and plant combination has to be maintained.
    Regards
    Saju

  • Error at the time of PGI

    Hi All,
    I am facing followed mentioned error at the time of doing pgi..Kindly suggest...
    Error is  Number range for trans/event type WL in year 2011 does not exist..
    Rgds,
    Pavan.

    pls. check -
    Error while Doing PGI
    thanks.

Maybe you are looking for

  • Error in report MD04

    Dear Gurus, have you ever seen the following error message? "Order 000001008418 possibly contains recursive BOM components Message no. MF331 Diagnosis The order contains component reservations that could have a higher low-level code than that of the

  • How do I transfer files from one external HD to another?

    I would like to move files from one external hard drive to another exter hard drive.  I can't seem to make a file on the drive I want to copy files to.  I'm new to the apple world, normally I would be able to do that easily with a PC.  Any help would

  • Using Pro*C on Linux Oracle 8.1.6.0 on RH 6.2

    Whe have some problems using Pro*C: the program runs ok on all Oracle versions, including Oracle 8.1.6.0 on DEC OSF, but various sql errors are encountered on Linux Red Hat 6.2: 1) "ORA-01458: invalid length inside variable character string" for this

  • App Store won't load - iPhone 3GS 3.1.3

    Hi everyone Whenever I go into the App Store on my iPhone 3GS, I get the grey front screen and the "Loading" message. Then "Featured" comes up across the top with the 5 icons across the bottom (Featured, Categories, Top 25, Search and Updates), and t

  • Can somebody give me a sample about alv oo?

    hi experts ,can you give me a sample about alv using oo method, i have tried data GS_LAYOUT TYPE SLIS_LAYOUT_ALV. data lt_fieldcat TYPE slis_t_fieldcat_alv.     call method alv_grid->set_table_for_first_display         exporting is_layout = gs_layout