Error at the time of dep. run
Dear All,
I have assigned the cost centers in the asset master & also create the Dep. GL accounts as a cost element but the problem arise when i run the depreciation.
At the time of running the depreciation run, we are getting the following error, "GL account requires a CO assignment".
The problem is we can't assign one cost center to the cost element because assets are related to different cost centers and depreciation should be posted to different relevant cost centers so we can't assign the cost center in the Depreciation GL cost element.
The requirement is when we run the planned dep., all the dep. related cost should post to relevant asset cost centers.
Even in the OKB9 settings, we can assign only one cost center against that dep.gl cost element.
Kindly do the needful.
Regards
Anuj
Hi
It is clear that your Org structure is different. You cant post deprciation to various cost centres. Post it to one cost centre and then go for assement/distribution. Alternatively you can use TCode KB11N for manual reposting from one cost centre to another.
Cheers
Srinivas
Similar Messages
-
Abap run time error at the time of GR
I am facing a ABAP run time error at the time of GR of STO through MIGO_GR, then abap run time error is generated, details are given as per the Tcode:- ST22;
Runtime Error MESSAGE_TYPE_X
ShrtText
The current application triggered a termination with a short dump.
What happened?
The current application program detected a situation which really
should not occur. Therefore, a termination with a short dump was
triggered on purpose by the key word MESSAGE (type X).
Transaction
Transaction......... "MIGO "
Program............. "SAPLMBWL"
Screen.............. "SAPLMIGO 0001"
Screen line......... 15
Information on where terminated
The termination occurred in the ABAP program "SAPLMBWL" in
"MB_POST_GOODS_MOVEMENT".
The main program was "SAPLMIGO ".
The termination occurred in line 56 of the source code of the (Include)
program "LMBWLU21"
of the source code of program "LMBWLU21" (when calling the editor 560).
Source Code Extract
55 IF NOT sy-subrc IS INITIAL.
>>>>> MESSAGE ID sy-msgid TYPE x NUMBER sy-msgno WITH "385830
57 sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.Hi Tiwari,
The error seems to be triggered by note 385830. Pls refer to 'Note 556000 - Short dump due to note 385830' in www.service.sap.com
Btw, which version are you in?
Best Regards
Sathees Gopalan -
Error at the time of GR/IR Clearing
Hi,
I am getting the following error at the time of manual clearing-F-03 or automatic clearing F.13
Document splitting: Items for clearing 1000/5000000001/2010/002 not found
Message no. GLT0002
Diagnosis
Document splitting cannot perform clearing because it was not possible to find complete splitting information on the items to be cleared (company code 1000, document number 5000000001, fiscal year 2010, item 002).
System Response
Clearing cannot be performed and the document cannot be posted.
Procedure
Exclude the affected item from clearing.
It may be that this item was not posted with active document splitting. In this case, this item or document would have to be migrated.
Kindly provide the solution.
Regards,
Hansa Chechani
Edited by: Hansachechani on Sep 2, 2010 6:58 AMHi Raheem,
I am running transaction code f.13 GR/IR clearing account. We have maintianed 3 three currencies. 1st AED-co code currency, 2nd usd- parallel currency, 3rd INR- parallel currency. At the time of clearing system is giving above error of account requires an assignment to a co object for GL account of Exchange Gain/Loss account. The exchange rate difference is coming for the 2nd currency ie USD. In the leading ledger there is no problem. We have done the setting in OKB9 and assigned the co object for Gl account of Exchange gain and loss. Hope you have understood the issue. Is there any solution apart from the setting in OKB9.
Mahesh -
Coherence Error at the time of Starting weblogic Server
Hi ,
I am getting below error at the time of starting Weblogic OSB managed server
We are using osb_cluster1 (Unicast) for osb_server1 managed server.
When Weblogic server try to start the managed server we get following Coherence errors and startup scripts try to point to Oracle Coherence 3.6.0.4.(its mainly happening in starting osb_server1 managed server, this error is not appearing during soa_server1 managed server start)
We don't want to use the coherence at all, we are trying to disable the coherence feature, but hardly getting any success in it, every time during server start-up following error appears.
Let me know if you have any solution to it.
####<Mar 5, 2012 9:18:55.424 AM > <Warning> <Coherence> <sjsj-idm.kuy.co.wo> <osb_server1> <Logger@406289568 3.6.0.4> <<anonymous>> <> <3976a80e38d52337:-f13ff44:135df5aa8b6:-8000-0000000000000007> <1330892335424> <BEA-000000> <Oracle Coherence 3.6.0.4 (member=n/a): This Member(Id=0, Timestamp=2012-03-05 09:18:23.752, Address=11.49.63.33:7880, MachineId=31265, Location=site:kuy.co.wo,machine:deap-idm01,process:10629, Role=OSB-node) has been attempting to join the cluster using WKA list [sjsj-idm.kuy.co.wo/11.49.63.33:9003] for 31 seconds without success; this could indicate a mis-configured WKA, or it may simply be the result of a busy cluster or active failover.>
####<Mar 5, 2012 9:18:55.425 AM > <Warning> <Coherence> <sjsj-idm.kuy.co.wo> <osb_server1> <Logger@406289568 3.6.0.4> <<anonymous>> <> <3976a80e38d52337:-f13ff44:135df5aa8b6:-8000-0000000000000007> <1330892335425> <BEA-000000> <Oracle Coherence 3.6.0.4 (member=n/a): Delaying formation of a new cluster; waiting for well-known nodes to respond>
####<Mar 5, 2012 9:22:58.769 AM > <Error> <Coherence> <sjsj-idm.kuy.co.wo> <osb_server1> <Logger@406289568 3.6.0.4> <<anonymous>> <> <3976a80e38d52337:-f13ff44:135df5aa8b6:-8000-0000000000000007> <1330892578769> <BEA-000000> <Oracle Coherence 3.6.0.4 (member=n/a): Detected soft timeout) of {WrapperGuardable Guard{Daemon=IpMonitor} Service=ClusterService{Name=Cluster, State=(SERVICE_STARTED, STATE_ANNOUNCE), Id=0, Version=3.6}}>
####<Mar 5, 2012 9:22:58.770 AM > <Warning> <Coherence> <sjsj-idm.kuy.co.wo> <osb_server1> <Logger@406289568 3.6.0.4> <<anonymous>> <> <3976a80e38d52337:-f13ff44:135df5aa8b6:-8000-0000000000000007> <1330892578770> <BEA-000000> <Oracle Coherence 3.6.0.4 (member=n/a): Attempting recovery of Guard{Daemon=IpMonitor}>
####<Mar 5, 2012 9:23:25.530 AM > <Error> <Coherence> <sjsj-idm.kuy.co.wo> <osb_server1> <Logger@406289568 3.6.0.4> <<anonymous>> <> <3976a80e38d52337:-f13ff44:135df5aa8b6:-8000-0000000000000007> <1330892605530> <BEA-000000> <Oracle Coherence 3.6.0.4 (member=n/a): Failure to join a cluster for 301 seconds; stopping cluster service.>
####<Mar 5, 2012 9:23:25.879 AM > <Error> <Coherence> <sjsj-idm.kuy.co.wo> <osb_server1> <Logger@406289568 3.6.0.4> <<anonymous>> <> <3976a80e38d52337:-f13ff44:135df5aa8b6:-8000-0000000000000007> <1330892605879> <BEA-000000> <Oracle Coherence 3.6.0.4 (member=n/a): Error while starting cluster: com.tangosol.net.RequestTimeoutException: Timeout during service start: ServiceInfo(Id=0, Name=Cluster, Type=Cluster
MemberSet=ServiceMemberSet(
OldestMember=n/a
ActualMemberSet=MemberSet(Size=0, BitSetCount=0
MemberId/ServiceVersion/ServiceJoined/MemberState
at com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.onStartupTimeout(Grid.CDB:6)
at com.tangosol.coherence.component.util.daemon.queueProcessor.Service.start(Service.CDB:28)
at com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.start(Grid.CDB:6)
at com.tangosol.coherence.component.net.Cluster.onStart(Cluster.CDB:637)
at com.tangosol.coherence.component.net.Cluster.start(Cluster.CDB:11)
at com.tangosol.coherence.component.util.SafeCluster.startCluster(SafeCluster.CDB:4)
at com.tangosol.coherence.component.util.SafeCluster.restartCluster(SafeCluster.CDB:7)
at com.tangosol.coherence.component.util.SafeCluster.ensureRunningCluster(SafeCluster.CDB:26)
at com.tangosol.coherence.component.util.SafeCluster.start(SafeCluster.CDB:2)
at com.tangosol.net.CacheFactory.ensureCluster(CacheFactory.java:998)
at com.bea.alsb.coherence.impl.CoherenceProvider.<init>(CoherenceProvider.java:45)
at com.bea.alsb.coherence.impl.CoherenceProviderFactory.newInstance(CoherenceProviderFactory.java:21)
at com.bea.alsb.coherence.init.CoherenceAppListener.preStart(CoherenceAppListener.java:45)
at weblogic.application.internal.flow.BaseLifecycleFlow$PreStartAction.run(BaseLifecycleFlow.java:282)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.application.internal.flow.BaseLifecycleFlow$LifecycleListenerAction.invoke(BaseLifecycleFlow.java:199)
at weblogic.application.internal.flow.BaseLifecycleFlow.preStart(BaseLifecycleFlow.java:62)
at weblogic.application.internal.flow.HeadLifecycleFlow.prepare(HeadLifecycleFlow.java:284)
at weblogic.application.internal.BaseDeployment$1.next(BaseDeployment.java:614)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:54)
at weblogic.application.internal.BaseDeployment.prepare(BaseDeployment.java:184)
at weblogic.application.internal.EarDeployment.prepare(EarDeployment.java:58)
at weblogic.application.internal.DeploymentStateChecker.prepare(DeploymentStateChecker.java:154)
at weblogic.deploy.internal.targetserver.AppContainerInvoker.prepare(AppContainerInvoker.java:60)
at weblogic.deploy.internal.targetserver.AppDeployment.prepare(AppDeployment.java:141)
at weblogic.management.deploy.internal.DeploymentAdapter$1.doPrepare(DeploymentAdapter.java:39)
at weblogic.management.deploy.internal.DeploymentAdapter.prepare(DeploymentAdapter.java:191)
at weblogic.management.deploy.internal.AppTransition$1.transitionApp(AppTransition.java:22)
at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)
at weblogic.management.deploy.internal.ConfiguredDeployments.prepare(ConfiguredDeployments.java:166)
at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:122)
at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:181)
at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:97)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:176)>
Edited by: 858026 on Mar 4, 2012 6:21 PM
Edited by: 858026 on Mar 4, 2012 6:23 PMHi NJ,
In WL console while setting up cluster I have given Messaging
Mode to Unicast,
By default Multicast address and ports comes up
Multicast Address - 239.192.0.0,
Multicast Port- 7001
I have modified the override file but still getting given error logs while server startup and its trying to look for override file in Oracle Coherence 3.6.0.4/coherence.jar
<!DOCTYPE coherence SYSTEM ""coherence.dtd"">
<coherence>
<cluster-config>
<!-- By default, this is using a multicast listener for cluster discovery, etc.
If you wish to use a unicast listener:
- update the entries in /coherence/unicast-listener/well-known-addresses/socket for each member of the cluster
(or specify the corresponding system properties)
- set the /coherence/unicast-listener/address to the host name of this machine
See http://coherence.oracle.com/display/COH35UG/well-known-addresses for more details. -->
<unicast-listener>
<well-known-addresses>
<socket-address id=""1"">
<address system-property=""OSB.coherence.wka1""></address>
<port system-property=""OSB.coherence.wka1.port""></port>
</socket-address>
<socket-address id=""2"">
<address system-property=""OSB.coherence.wka2""></address>
<port system-property=""OSB.coherence.wka2.port""></port>
</socket-address>
<socket-address id=""3"">
<address system-property=""OSB.coherence.wka3""></address>
<port system-property=""OSB.coherence.wka3.port""></port>
</socket-address>
<socket-address id=""4"">
<address system-property=""OSB.coherence.wka4""></address>
<port system-property=""OSB.coherence.wka4.port""></port>
</socket-address>
<socket-address id=""5"">
<address system-property=""OSB.coherence.wka5""></address>
<port system-property=""OSB.coherence.wka5.port""></port>
</socket-address>
<socket-address id=""6"">
<address system-property=""OSB.coherence.wka6""></address>
<port system-property=""OSB.coherence.wka6.port""></port>
</socket-address>
<socket-address id=""7"">
<address system-property=""OSB.coherence.wka7""></address>
<port system-property=""OSB.coherence.wka7.port""></port>
</socket-address>
<socket-address id=""8"">
<address system-property=""OSB.coherence.wka8""></address>
<port system-property=""OSB.coherence.wka8.port""></port>
</socket-address>
<socket-address id=""9"">
<address system-property=""OSB.coherence.wka9""></address>
<port system-property=""OSB.coherence.wka9.port""></port>
</socket-address>
</well-known-addresses>
<address system-property=""OSB.coherence.localhost"">127.0.0.1</address>
<port system-property=""OSB.coherence.localport"">7890</port>
</unicast-listener>
<multicast-listener>
<address system-property=""OSB.coherence.clusteraddress"">239.192.0.0</address>
<port system-property=""OSB.coherence.clusterport"">7001</port>
</multicast-listener>
</cluster-config>
</coherence>
####<Mar 6, 2012 3:00:44.050 PM NZDT> <Notice> <StdErr> <dete-idm01.hnz.co.nz> <osb_server1> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1330999244050> <BEA-000000> <2012-03-06 15:00:44.015 Oracle Coherence 3.6.0.4 <Info> (thread=[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'): Loaded operational configuration from "zip:/u01/app/oracle/product/OSB11.1.1.4/oracle_common/modules/oracle.coherence_3.6/coherence.jar!/tangosol-coherence.xml">
####<Mar 6, 2012 3:00:44.053 PM NZDT> <Notice> <StdErr> <dete-idm01.hnz.co.nz> <osb_server1> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1330999244053> <BEA-000000> <2012-03-06 15:00:44.029 Oracle Coherence 3.6.0.4 <Info> (thread=[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'): Loaded operational overrides from "zip:/u01/app/oracle/product/OSB11.1.1.4/oracle_common/modules/oracle.coherence_3.6/coherence.jar!/tangosol-coherence-override-dev.xml">
####<Mar 6, 2012 3:00:44.053 PM NZDT> <Notice> <StdErr> <dete-idm01.hnz.co.nz> <osb_server1> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1330999244053> <BEA-000000> <2012-03-06 15:00:44.030 Oracle Coherence 3.6.0.4 <Info> (thread=[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'): Loaded operational overrides from "zip:/u01/app/oracle/product/OSB11.1.1.4/user_projects/domains/OSBD/servers/osb_server1/tmp/_WL_user/ALSB Coherence Cache Provider/yannht/APP-INF/lib/com.bea.alsb.coherence-impl.jar!/tangosol-coherence-override.xml">
####<Mar 6, 2012 3:00:44.073 PM NZDT> <Error> <OSB Coherence WebLogic> <dete-idm01.hnz.co.nz> <osb_server1> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <0ed5cc20267507d3:a44cfd4:135e5bc3642:-8000-0000000000000003> <1330999244073> <BEA-2032481> <Unable to initialize OSB Coherence Cache Provider because there was an error starting Coherence:
com.bea.alsb.coherence.impl.ConfigurationException: Error starting Coherence from cache configuration file /coherence/osb-coherence-cache-config.xml:
(Wrapped) java.lang.reflect.InvocationTargetException
at com.tangosol.util.Base.ensureRuntimeException(Base.java:293)
at com.tangosol.util.Base.ensureRuntimeException(Base.java:269)
at com.tangosol.net.CacheFactory.getServiceConfig(CacheFactory.java:1355)
at com.tangosol.net.CacheFactory.getCacheFactoryBuilderConfig(CacheFactory.java:1231)
at com.tangosol.net.CacheFactory.getCacheFactoryBuilder(CacheFactory.java:593)
at com.bea.alsb.coherence.impl.CoherenceProvider.<init>(CoherenceProvider.java:42)
at com.bea.alsb.coherence.impl.CoherenceProviderFactory.newInstance(CoherenceProviderFactory.java:21)
at com.bea.alsb.coherence.init.CoherenceAppListener.preStart(CoherenceAppListener.java:45)
at weblogic.application.internal.flow.BaseLifecycleFlow$PreStartAction.run(BaseLifecycleFlow.java:282)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.application.internal.flow.BaseLifecycleFlow$LifecycleListenerAction.invoke(BaseLifecycleFlow.java:199)
at weblogic.application.internal.flow.BaseLifecycleFlow.preStart(BaseLifecycleFlow.java:62)
at weblogic.application.internal.flow.HeadLifecycleFlow.prepare(HeadLifecycleFlow.java:283)
at weblogic.application.internal.BaseDeployment$1.next(BaseDeployment.java:613)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.BaseDeployment.prepare(BaseDeployment.java:184)
at weblogic.application.internal.EarDeployment.prepare(EarDeployment.java:58)
at weblogic.application.internal.DeploymentStateChecker.prepare(DeploymentStateChecker.java:154)
at weblogic.deploy.internal.targetserver.AppContainerInvoker.prepare(AppContainerInvoker.java:60)
at weblogic.deploy.internal.targetserver.AppDeployment.prepare(AppDeployment.java:141)
at weblogic.management.deploy.internal.DeploymentAdapter$1.doPrepare(DeploymentAdapter.java:39)
at weblogic.management.deploy.internal.DeploymentAdapter.prepare(DeploymentAdapter.java:191)
at weblogic.management.deploy.internal.AppTransition$1.transitionApp(AppTransition.java:21)
at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)
at weblogic.management.deploy.internal.ConfiguredDeployments.prepare(ConfiguredDeployments.java:165)
at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:122)
at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:180)
at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:96)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:176)
Caused by: java.lang.reflect.InvocationTargetException
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.tangosol.net.CacheFactory.getServiceConfig(CacheFactory.java:1350)
... 29 more
Caused by: (Wrapped: Failed to apply the element override: /tangosol-coherence-override-dev.xml) (Wrapped: Failed to apply the element override: /tangosol-coherence-override.xml) (Wrapped: Failed to apply the element override: /coherence/osb-coherence-override.xml) (Wrapped) java.io.IOException: Exception occurred during parsing: looking for id=10, found id=1((0,29,13) Name coherence.dtd)
at com.tangosol.util.Base.ensureRuntimeException(Base.java:293)
at com.tangosol.coherence.component.application.console.Coherence.loadOverrides(Coherence.CDB:83)
at com.tangosol.coherence.component.application.console.Coherence.loadConfiguration(Coherence.CDB:46)
at com.tangosol.coherence.component.application.console.Coherence.getServiceConfig(Coherence.CDB:14)
at com.tangosol.coherence.component.application.console.Coherence.ensureRunningLogger(Coherence.CDB:10)
at com.tangosol.coherence.component.application.console.Coherence.getSafeCluster(Coherence.CDB:14)
at com.tangosol.coherence.component.application.console.Coherence.getServiceConfig(Coherence.CDB:8)
... 34 more
Caused by: (Wrapped: Failed to apply the element override: /tangosol-coherence-override.xml) (Wrapped: Failed to apply the element override: /coherence/osb-coherence-override.xml) (Wrapped) java.io.IOException: Exception occurred during parsing: looking for id=10, found id=1((0,29,13) Name coherence.dtd)
at com.tangosol.util.Base.ensureRuntimeException(Base.java:293)
at com.tangosol.coherence.component.application.console.Coherence.loadOverrides(Coherence.CDB:83)
at com.tangosol.coherence.component.application.console.Coherence.loadOverrides(Coherence.CDB:64)
... 39 more
Caused by: (Wrapped: Failed to apply the element override: /coherence/osb-coherence-override.xml) (Wrapped) java.io.IOException: Exception occurred during parsing: looking for id=10, found id=1((0,29,13) Name coherence.dtd)
at com.tangosol.util.Base.ensureRuntimeException(Base.java:293)
at com.tangosol.coherence.component.application.console.Coherence.loadOverrides(Coherence.CDB:83)
at com.tangosol.coherence.component.application.console.Coherence.loadOverrides(Coherence.CDB:64)
... 40 more
Caused by: (Wrapped) java.io.IOException: Exception occurred during parsing: looking for id=10, found id=1((0,29,13) Name coherence.dtd)
at com.tangosol.run.xml.XmlHelper.loadXml(XmlHelper.java:120)
at com.tangosol.run.xml.XmlHelper.loadXml(XmlHelper.java:155)
at com.tangosol.coherence.component.application.console.Coherence.loadOverrides(Coherence.CDB:41)
at com.tangosol.coherence.component.application.console.Coherence.loadOverrides(Coherence.CDB:64)
at com.tangosol.coherence.component.application.console.Coherence.loadOverrides(Coherence.CDB:64)
at com.tangosol.coherence.component.application.console.Coherence.loadConfiguration(Coherence.CDB:46)
at com.tangosol.coherence.component.application.console.Coherence.getServiceConfig(Coherence.CDB:14)
at com.tangosol.coherence.component.application.console.Coherence.ensureRunningLogger(Coherence.CDB:10)
at com.tangosol.coherence.component.application.console.Coherence.getSafeCluster(Coherence.CDB:16)
at com.tangosol.coherence.component.application.console.Coherence.getServiceConfig(Coherence.CDB:8)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.tangosol.net.CacheFactory.getServiceConfig(CacheFactory.java:1350)
at com.tangosol.net.CacheFactory.getCacheFactoryBuilderConfig(CacheFactory.java:1231)
at com.tangosol.net.CacheFactory.getCacheFactoryBuilder(CacheFactory.java:593)
at com.bea.alsb.coherence.impl.CoherenceProvider.<init>(CoherenceProvider.java:42)
at com.bea.alsb.coherence.impl.CoherenceProviderFactory.newInstance(CoherenceProviderFactory.java:21)
at com.bea.alsb.coherence.init.CoherenceAppListener.preStart(CoherenceAppListener.java:45)
at weblogic.application.internal.flow.BaseLifecycleFlow$PreStartAction.run(BaseLifecycleFlow.java:282)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.application.internal.flow.BaseLifecycleFlow$LifecycleListenerAction.invoke(BaseLifecycleFlow.java:199)
at weblogic.application.internal.flow.BaseLifecycleFlow.preStart(BaseLifecycleFlow.java:62)
at weblogic.application.internal.flow.HeadLifecycleFlow.prepare(HeadLifecycleFlow.java:284)
at weblogic.application.internal.BaseDeployment$1.next(BaseDeployment.java:614)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:54)
at weblogic.application.internal.BaseDeployment.prepare(BaseDeployment.java:184)
at weblogic.application.internal.EarDeployment.prepare(EarDeployment.java:58)
at weblogic.application.internal.DeploymentStateChecker.prepare(DeploymentStateChecker.java:154)
at weblogic.deploy.internal.targetserver.AppContainerInvoker.prepare(AppContainerInvoker.java:60)
at weblogic.deploy.internal.targetserver.AppDeployment.prepare(AppDeployment.java:141)
at weblogic.management.deploy.internal.DeploymentAdapter$1.doPrepare(DeploymentAdapter.java:39)
at weblogic.management.deploy.internal.DeploymentAdapter.prepare(DeploymentAdapter.java:191)
at weblogic.management.deploy.internal.AppTransition$1.transitionApp(AppTransition.java:22)
at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)
at weblogic.management.deploy.internal.ConfiguredDeployments.prepare(ConfiguredDeployments.java:166)
at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:122)
at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:181)
at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:97)
... 3 more
Caused by: java.io.IOException: Exception occurred during parsing: looking for id=10, found id=1((0,29,13) Name coherence.dtd)
at com.tangosol.run.xml.SimpleParser.parseXml(SimpleParser.java:134)
at com.tangosol.run.xml.SimpleParser.parseXml(SimpleParser.java:71)
at com.tangosol.run.xml.SimpleParser.parseXml(SimpleParser.java:84)
at com.tangosol.run.xml.XmlHelper.loadXml(XmlHelper.java:116)
... 43 more
The error can be caused by one of the following:
1) The operational configuration file is invalid (see $DOMAIN_DIR$/config/osb/coherence/osb-coherence-override.xml)
2) The cache configuration file is invalid (see $DOMAIN_DIR$/config/osb/coherence/osb-coherence-cache-config.xml)> -
Error at the time of execution using weblogic10
Hi All,
i am new in the implementetion of weblogic10. anyhow i am able to deploy the message driven bean application successfully, but getting the following errors at the time of execution:
Error 500--Internal Server Error
java.lang.NullPointerException
at jsp_servlet.__calculator._jspService(__calculator.java:137)
at weblogic.servlet.jsp.JspBase.service(JspBase.java:34)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:226)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:124)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:283)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:175)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3370)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(Unknown Source)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2117)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2023)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1359)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:200)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:172)
so requesting all members of bea to suggest me what to do?
regards
minahi,
in the total application i ve nt used calculator.java anywhere. my client file is as following:
<%@ page import="example.*, javax.naming.*, javax.jms.Queue, java.text.*,javax.jms.*,java.sql.Timestamp"%>
<%
if ("send".equals(request.getParameter ("action"))) {
QueueConnection cnn = null;
QueueSender sender = null;
QueueSession sess = null;
Queue queue = null;
try {
InitialContext ctx = new InitialContext();
queue = (Queue) ctx.lookup("java:comp/env/jms/testQueue");
QueueConnectionFactory factory =
(QueueConnectionFactory) ctx.lookup("java:comp/env/jms/connectionFactory");
cnn = factory.createQueueConnection();
sess = cnn.createQueueSession(false,
QueueSession.AUTO_ACKNOWLEDGE);
} catch (Exception e) {
e.printStackTrace ();
TextMessage msg = sess.createTextMessage(
request.getParameter ("start") + "," +
request.getParameter ("end") + "," +
request.getParameter ("growthrate") + "," +
request.getParameter ("saving")
// The sent timestamp acts as the message's ID
long sent = System.currentTimeMillis();
msg.setLongProperty("sent", sent);
sender = sess.createSender(queue);
sender.send(msg);
// sess.commit ();
sess.close ();
%>
<html>
<head><meta http-equiv="REFRESH" content="3;URL=check.jsp?sent=<%=sent%>"></head>
<body>
Please wait while I am checking whether the message has arrived.
Go back to Calculator
</body>
</html>
<%
return;
} else {
int start = 25;
int end = 65;
double growthrate = 0.08;
double saving = 300.0;
%>
<html>
<body>
<p>Investment calculator
<form action="calculator.jsp" method="POST">
<input type="hidden" name="action" value="send">
<b> Start age = <input type="text" name="start" value="<%=start%>">
End age = <input type="text" name="end" value="<%=end%>">
Annual Growth Rate = <input type="text" name="growthrate" value="<%=growthrate%>">
Montly Saving = <input type="text" name="saving" value="<%=saving%>"></b>
<input type="submit" value="Calculate">
<INPUT type="button" value="Close Window" onClick="window.close()">
</form>
</p>
</body>
</html>
<%
return;
%>
please check out my JNDI name in this program, and suggest me what to do.
Thanks
Minakshi -
Error at the time of Release of Cost Estimate
Hi All,
During the relase of Costing Run, we encountered with below error:
Valuation data for material X190191302 is locked by the user SOOKKWANC
Message no. M3024
We are getting the same error at the time of CK24..also checked the log in of this user ID:SOOKKWANC but found that this user is not accessing any t-code.
Please help.
Thanks..
Regards,
VivekDear Vivek,
When releasing same material might be used in another transction by another user
At this point of time material gets locked
Kindly un-lock ( Delete ) the entries in SM12
Then proceed you issue will be solved
Regards
Madhu -
Update termination error at the time of order creation and chamge?
Dear gurus,
Facing an error at the time of creation of order.
system is giving update termination error & when we are going in change mode of that order system is giving an error message " SD document XXXX is not in the database or has been achieved"
please treat on priority
regards,
kraiHi,
Goto ST22 T.Code and analyse the error.The error message why it is terminated will be displayed here.
Or go to SBWP T.Code in the user where you got this error and check the inbox.
It will display why the error is appearing.
Show the same to the ABAPer and ask them to work on it.
I think your server may be slow and it will take some time to update the order created by you.But I am not sure.Check the error message.
Regards,
Krishna. -
Funds Mangement - Fund center derivation error at the time of PO/MIGO
Hello -
Generally ,If FM account assignements are available in purchase requisition , same should be carried to purchase order and to the good receipts. But I am getting an error at the time of PO or MIGO that " Fund center not derived'. Why this happening ? What can I do to avoid this problem. can I create a step in the derivation to keep the original FM assignments from the previous documents....is there something to do with field status??
Thanks in Advance
ChrisHi
Please read carefully tye warehouse concept
Excample warehouse concept II
>At PR no FM update
>At PO no FM update
>AT GR no FM update
>AT consumption on Cost center, WBS or Internal order FM is updated and AVC is checked
Read the release note of ERP 6 or ERP5 the customising of Warehouse concept is well explained
In sumary:
Create a stock commitment item statistically
Create a warehouse funds center
Create a funds
Create a derivation rule for warehouse concept 2
Create a derivation rule where you have plant, valuation class and warehouse funds center
Cretae a derivation rule fund>warehouse funds center>stock commitment item
Go in customising integration to make field status for assignement FM account asignments
Select PO and PR and make optional the funds, funds cenbter, commitment item
And when you will create a PR or PO FM data will come automatically
ciao
Salvator
PSM-FM Consultant
BXL -
Update termination error at the time of order creation
Dear gurus,
Facing an error at the time of creation of order.
system is giving update termination error & when we are going in change mode of that order system is giving an error message " SD document XXXX is not in the database or has been achieved"
please treat on priority
regards,
kraiHello ,
"Update terminated " error has two reasongs.
First is system update was not active and hence terminated
For this to check Goto the transaction code SM13 and check whether the SYSTEM UPDATE is active or not.
If it is active ,
Then click on the Option TOBE updated in the status and execute, then in the next screen you can find some list of documents that are not updated and causing error .
Click on MODULES in the screen and find the erro which causing this error.
Most this kind of error will happen if something in the Funcion Module or USER EXIT is missing.
Please check and revert back if you need further details
Also check the link
http://help.sap.com/saphelp_nw04/helpdata/en/e5/de870535cd11d3acb00000e83539c3/frameset.htm
regards,
santosh -
Error at the time of PR creation
I am facing a Error at the time of PR creation:-
Status "Material Inactive" of material 30001668 does not allow external procurement
Message no. ME053
how to active the material.you have a material status in your material master, either at plant level or at general level.
Just remove the status.
Plant level status can be found in almost any plant view,
general level in general data view -
Budget Error at the time of Release of Purchase order
Hi,
We are using former budgeting and getting budget payment budget exceeding error at the time of releasing a carry forward PO.
PO has been successfully carried forward to next year and we are not making any changes in the PO. While releasing the same via ME28, system is giving budget exceeding error.
Screens shot is attached herewith for reference.
Thanks in advance.Hi Mar,
The root cause of the issue is incorrect updation of taxes value in EKPO table for that PO, which causes the system to consume less budget at the time of saving of PO.
Now while releasing the PO, system is checking for whole tax amount and sufficient budget is not available in the budget address.
Hope you able to connect the issue.....:P
Regards
Rohit Chopra -
Error at the time of posting goods by using 561 movement type
Hi All
I am getting the following error at the time of doing MB1C tcode..
Fld selectn for mvmt type 561 / acct 10001 differs for Ext. GA amount in LC (023)..
Kindly help..
Rgds,
Pavan.Hi,
Simply go to OMJJ
Go to movement type 561
Then double click on FIELD SELECTION (from 201)/batch search procedure
Then select your relevant movement and click on DETAIL
Then go to or double click on MATERIALS MANAGEMENT then you will see field Ext. GA amount in LC tickmark to SUPRESS and save
Kapil -
While running F110 mail trigger should happen at the time of payment Run
Hi Experts,
I have configured FBZP and automatic mail trigger for Payment Advice also. Now while running F110 then at the time of Proposal Run the mail is getting triggered. But since its proposal it can be edited also. So I need the mail should trigger at the time of Payment Run. Plz suggest how to achieve this.
Thanks in Advance,
ArabindaCheck this note: 836169
may be helpful with the config and setup, its a consulting note.... -
House Bank selection at the time of Payment run
Hello All,
At the time of automatic payment program, The user has to select the house bank for the payment irrespective of ranking order maintained in the FBZP. And I dont want to give the house bank in all the line item at the time of posting or reallocate at the time of payment run.
Is there any option to maintain the house bank in a single place before the payment run, so that for that particular payment run picks the house bank.
Hope the question is clear.
Raja.AHi,
the user should use the "available amounts" in bank selection and put zero in the bank he doesn't want to use, and put an amount in the bank he wants tu use.
The available amounts may be changed from the F110 transaction, environment menu, maintain config, bank determination. -
Interest posting at the time of dunning run
Hello Fi experts,
In the dunning process, we can define that interest is to be calculated or not by making the desired setiings at dunning procedure as well as at the dunning level. I have a small query in that. Is interest posted also at the time of dunning run or its just calculated, and posted on at later stage? Please help.
Regards,
VanHi,
In Post Dunning Run, you can see the interest amount on the print form, but There will not be an FI Entry for the same. if you want to have Interest calculations posted to FI , for this You need to Maintain a Separate config settings and also the GL Account ,should be activated with Interest Calculation indicator i.e in GL Master. you can do the required Config Settings at SPRO -Financial Accounting (New)-Accounts Receivable and Accounts Payable-Business Transactions-Interest Calculation-Prepare Interest on Arrears Calculation-Excute go to New entries or Click on the Indicator for which you want to maintain and give the details as per the requirment.
also check the other settings in the same path for furdhur requirments.
Hope the above clarifies your Doupts.
Thanks
Goutam
Maybe you are looking for
-
Display burn in - Apple does not want to replace the LCD
Recently my iMac 24” LCD display began to have “screen burn ins“ or image persistence on the LCD. I have done extensive online research about the issue, I tried setting my screensaver to pure white and running the apple screensaver to resolve the iss
-
Error installing OS then 4MEM/4/40000000: , does it mean bad RAM only ?
Long story short , while installing OS 10.4.10 combo update I got this message "there were errors installing your software , please restart your computer " , started up but would not get passed the login bar /blue screen , after numerous tries I star
-
Displays. 16:10 vs 16:9
I am switching from PC to a Mac. When using the Mac pro and a third party monitor like NEC or Dell, Is there a difference if the monitor is 16:10 or 16:9 when using Photoshop CS4 ? Thanks
-
How does FCPX handle audio?
Still working on getting audio exported to an AAF, and having problem doing this. So I need help understanding how FCPX is handling my audio. When it's on the timeline, is it being conformed to the frame rate of the video? When audio is exported, d
-
Found this article by Richard Taylor quite interesting and thought others might as well. Russ