Error at the time of Release and Save the WBS

Dear All,
      When i am going to release and save the project the below error has occurred.
Error-Release not allowed as budget is not allocated to the project. Project will be exited and data changes will not be saved!
But, i have budgeted the WBS and release the budget.
Kindly suggest.
Thanks,
Asutosh

Hello ,
System status will allow you to release project. You are getting this due to user status.
Your user status say initially 1 needs to change to say 2 so that you can release your project.
This user status is defined in customization and assigned to your project profile.
Regards
Keshav

Similar Messages

  • Email to triggerd to the concerned vendor on the release and save of the PO

    hi,
    the requirement is that, when the purchase order is released and saved in me28/me29n .then a email should be triggered to the concernd vendor .
    is there any standard procedure for this.
    As in NACE tcode,there is output type(NEU) for purchase order(EF),in the processing routines view- there is a processing routine with the row.
    External send  SAPFM06P  ENTRY_NEU  MEDRUCK
    what does this signify.
    plz help
    regards,
    johnson
    Edited by: johnson george on May 30, 2008 3:00 PM
    Edited by: johnson george on May 30, 2008 3:13 PM

    hi,
    u can do this using workflow.
    workflow paths
    hi,
    Workflows
    http://www.sap-img.com/workflow/sap-workflow.htm
    http://www.sapgenie.com/workflow/index.htm
    https://sapneth9.wdf.sap.corp/workflow
    http://help.sap.com/saphelp_webas620/helpdata/en/a5/172437130e0d09e10000009b38f839/frameset.htm
    http://help.sap.com/saphelp_47x200/helpdata/en/a5/172437130e0d09e10000009b38f839/frameset.htm
    For examples on WorkFlow...check the below link..
    http://help.sap.com/saphelp_47x200/helpdata/en/3d/6a9b3c874da309e10000000a114027/frameset.htm
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PSWFL/PSWFL.pdf
    http://help.sap.com/saphelp_47x200/helpdata/en/4a/dac507002f11d295340000e82dec10/frameset.htm
    http://www.workflowing.com/id18.htm
    http://www.e-workflow.org/
    http://web.mit.edu/sapr3/dev/newdevstand.html
    Follow this link for examples with screen shots.
    http://www.****************/Tutorials/Workflow/Workflow.htm
    Check the demo of workflow from the following link:
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e0bbdb3c-d640-2a10-d3b2-e4d9b90536a6
    for tutorials:
    http://www.sapbrainsonline.com/TUTORIALS/TECHNICAL/WORKFLOW_tutorial.html
    http://workflowgenie.com/index.php?option=com_content&task=view&id=56&Itemid=45
    http://sapmaterial.com/workflow.html
    Check the demo of workflow from the following link:
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e0bbdb3c-d640-2a10-d3b2-e4d9b90536a6
    for tutorials:
    http://www.sapbrainsonline.com/TUTORIALS/TECHNICAL/WORKFLOW_tutorial.html
    http://workflowgenie.com/index.php?option=com_content&task=view&id=56&Itemid=45
    http://sapmaterial.com/workflow.html

  • Illustrator CC is taking a very long time to open and save files.

    I am using a Mac with the Mavericks OS. Illustrator can take up to FIVE MINUTES to open or save a file. It is becoming a waste of time as I have to work on multiple projects a day. I read about "Adobe Drive" but have not found this option on the version of Illustrator that I have.
    Please help!

    Any update?
    I found this discussion: http://forums.adobe.com/message/5839180 but have been unable to locate Adobe Drive on my system.
    I have followed the above suggestions with no avail. I have only been opening files from my desktop. This issue is only with Illustrator, Photoshop works fine.
    I ran a script yesterday that opens up eps files and saves them as a png, and what normally takes around 30 seconds took almost 45 minutes. I need to solve this problem asap.
    Would uninstalling and reinstalling the CC suite be of any benifit?

  • I have windows 7 and just purchased quicktime pro, I get error-2000 ever time I try and open a dvd.

    I have just paid £20 for QuickTime 7 pro and I cannot open a DVD. I get error-2000 every time. Any advice?

    Neither QuickTime Player or the Pro upgrade can play commercial DVD's.
    The MPEG-2 format found on non DRM DVD's requires additional software.

  • I am receiving an error message every time I try to save files using QuickOffice Pro.  Any advice on what I might be doing wrong?

    I am receiving an error message that it is unable to save my file everytime I try to save a file using QuickOffice Pro on my iPad.  It seems like I must have missed a setting or something someplace but I can't figure it out. 
    Any advice? 
    Thanks!

    Make sure that the network.protocol-handler.external.javascript has the default value (false).
    *<b>about:config</b> page: <b>network.protocol-handler.external.javascript</b> = false
    You can open the <b>about:config</b> page via the location/address bar.
    You can accept the warning and click "I'll be careful" to continue.
    *http://kb.mozillazine.org/about:config
    You can try these steps in case of issues with web pages:
    You can reload web page(s) and bypass the cache to refresh possibly outdated or corrupted files.
    *Hold down the Shift key and left-click the Reload button
    *Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
    *Press "Command + Shift + R" (Mac)
    Clear the cache and remove cookies only from websites that cause problems.
    "Clear the Cache":
    *Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
    "Remove Cookies" from sites causing problems:
    *Firefox/Tools > Options > Privacy > "Use custom settings for history" > Cookies: "Show Cookies"
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
    *Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
    *Do NOT click the Reset button on the Safe Mode start window
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • I get 'Error 6' every time I try and open photoshop!

    I purchased photoshop a little over a month ago. I functioned for about three weeks, and for the past week every  time I try and open it I get a window that says 'licensing for the product has stopped working.........Error: 6'--I have attached it here for clarity.
    I have had no luck getting through to customer service. I did find an article on adobe.come that led me through some steps to correct this issue, but they did not work.
    It is so frustrating! Anyone have a solution? Thanks!
    SF Ellen-

    Please let us know if this works.
    I have a similar problem.
    I have a macbook pro with a 320gb internal disk and a 64gb solid state disk.  i run the OS and apps off the SSD and keep my data on the spinning disk.
    My system has been running well for months.  it crashed today.  i fixed permissions on all disks.
    I can start photoshop CS4 when i boot off the internal disk, but i get "Error 6" when i boot off the SSD.
    I have read a bunch of articles and tried some things that haven't worked.
    I'm up for un-installing and re-installing if it will help.
    Thanks,
    Bert

  • Trying to save a Form filled out that came in Adobe Reader format, each time I try and save it says it can only save a blank copy

    trying to save a form filled out that came in Adobe reader format, each I try and save it, it says that it can only save a blank format and I lose the data

    Is there anything in the document properties that would make it behave that way?

  • Long time to load and save

    I upgraded to Premier Pro CS5 about a month ago and have had excellent results with several small projects.  But now I am working on a larger project (45 minutes) and the projects takes a long time to load - 10 to 15 minutes - and even longer to save - up to an hour.  Today, while saving, I received low memory warning from windows.  I changed optimize memory in edit - preference to "memory" with no effect.  Here are some of the particulars
    System
    Intel Core I5 650
    8 gig ram - 6.5 gig dedicated to Pr
    2 - 1 terabyte hard drives
    Gforce GTX470 video card
    Windows 7 Home Premium
    dedicated computer to Premiere Pro
    Project
    Mostly HDV video
    some DV video
    ambient sound track
    narration track
    music track
    a few still pictures
    multiple titles
    Any help would be appreciated.  This is my first post to this forum.  Am I in the right place for this question? 
    Thanks
    Don

    Wow!  Thanks for the quick and helpful replies.  It is much appreciated.
    Hunt:
    Yes both HDDs are internal  C: has programs and paging  E: is just for media scratch and project
    Page files are system managed.  Page file size is 8183 MB.  MS help suggests I set a page file size do you agree and what size would you recommend?
    Colin:
    I am embarrassed that I did not think of this.  I am at version 5.0.0   Guess I have been spoiled by s/w installations that check for recent updates at time of install.  I will update Premiere in the morning.
    Harm:
    I appreciate the words of wisdom.  The scary thing is that I think I understand and resemble quote you included!  Thanks for the link.  I will check it out after I get Premiere update.
    Thanks again to all.  Will work on this tomorrow and let you know how it turned out.
    Don

  • "general installation error" message each time I try and install Flashplayer 13

    I cannot install the latest version of flashplayer. during the installation I keep getting a "general installation error" message.
    I have un-installed my old version of flashplayer and followed all the trouble shootong tips but to no avail.
    My system is a macintosh, operating with 10.8.5. Any help would be gratefully received......

    It should be 13.0.0.206.
    Download the following:
    Flash Player Plug-in (All other browsers) or http://download.macromedia.com/get/flashplayer/current/licensing/win/i nstall_flash_player_13_plugin.msi
    Flash Player Uninstaller
    Also, download these:
    Shockwave Player Uninstaller
    Shockwave Player 112 FULL installer (Other browsers)
    Save all the files and close your browser.
    Run the uninstallers first (both of them)
    Go to: C/Windows/System32
    Delete the Macromed folder.
    Go to: C/Windows/SysWOW64
    Delete the Macromed folder.
    Open your Registry Editor (Start>Run or press the Windows key + R and type 'regedit' [minus the quotes] and click OK)
    In the Registry Editor, go to:
    HKEY_LOCAL_MACHINE/SOFTWARE
    Delete the Macromedia folder (Right click and choose "Delete").
    Go to:
    HKEY_CURRENT_USER/Software and delete the Macromedia folder there too.
    Close the Registry Editor and empty your recycle bin.
    Run the Flash Player installer, and then the Shockwave FULL installer you downloaded.

  • Order release and save!

    i am getting the error
    "error during calculating costs"
    i have checked it in detial, can i stop it any way.
    Regards
    Agha Khurram Shah

    hi shah
    costing is based on material ,activity and overhead cost , i dont think its not possible to cancel that.Just try it set the customization settings in Availability check for material ,PRT,capacity as "NO CHECK" while creating and saving the order and also you have to create the control key which is not relavant to costing.
    but if you do so the main objective of the module you are using will not be utilised.
    just try it
    regards
    thyagarajan

  • HT6162 An error occurs every time I try and update my iPhone 4 to iOS 7.1. Why is this happening and how can I fix it?

    I've cleared my entire phone in order to make space for this update and now it won't update.  What am I doing wrong?  Is there anything I can do?

    Did you jailbreak your iPhone ?
    OTA Update would not work.
    You need to Restore in iTunes. Pray it goes well.

  • Trying to update a web site and iweb crashes every time I try an save my changes or when I try and publish to a folder on my desktop.

    trying to update a website created using iweb. Each time I try and save my changes or try and publish to a desktop folder iweb crashes.Any ideas why and any suggested solutions?
    Paddysk7

    What version of iWeb are you suing and what version of OS X?
    You can try the troubleshooting steps under "Fix iWeb" here...
    http://www.iwebformusicians.com/iWeb/iWeb-Tips.html

  • Error while assigning user for release approval path for payment release

    Hi everyone,
         I am trying to assign user for payment release in SPRO. I have defined upto 'Define relevant document types for release for payment', after that while assigning user in terms of position for release and save it, i am getting error 'Program error: ASSIGN with length 0 in program "MP120800" '.Because of it i can t proceed further.
    The data in details below;
    1. Create Workflow Variant for Release for Payment
       1000     SAP
    2. Assign Company Code Workflow Variant for Release for Payment
      1000     1000     SAP
    3. Define Release Approval Groups for Release for Payment
      0001     Vendor A
    0002     vendor B
    0003     Vendor C
    0004     G/L accounts
    4. Define Release Approval Paths for Release for Payment
      0001     Vendor high
    0002     Vendor middle
    0003     Vendor low
    0004     G/L accounts
    0005     Other
    5. Assign Release Approval Paths for Release for Payment
      1000     KZ     0001     0001
    1000     KZ     0002     0002
    1000     KZ     0003     0003
    6. Assign Release Approval Procedure for Release for Payment
    1000     0001     20,000.00     KES     1     WS10000052     WS00400011
    1000     0002     50,000.00     KES     2     WS10000052     WS00400021
    1000     0003     1,000,000.00     KES     3     WS10000052     WS00400022
    7. Define Relevant Document Types for Release for Payment
         1000     KR
    1000     KZ
    8. Define Users with Authorization to Payment Release
    1000     0001     1     20,000.00     KES
    1000     0001     2     50,000.00     KES
    1000     0001     3     100,000.00     KES
    here i have selected the option and tried to create Orgobject, i am getting following error
    Program error: ASSIGN with length 0 in program "MP120800"
    If any corrections in the definitions, Please let me know.
    Thanks in advance!!

    Hello,
    Please start the report RSWOGIND, set also the checkbox "generate all
    ObjTypes from new". This should solve the problem.
    Best regards, Hana

  • Every time I attempt to 'Save for Web' Photoshop crashes

    Every time I try and save an image using 'Save for Web' Photoshop crashes and gives an error message. 
    Running Photoshop Elements 12 on a Mac 10.9.5
    Have uninstalled and reinstalled Photoshop MANY times. 
    PLEASE HELP

    Here are the first bit of the details, do you require more?  Just didn't want to copy+past 5 pages of script here.  THANK YOU for trying to help me. 
    Process:         Adobe Photoshop Elements 12 Editor [8051]
    Path:            /Applications/Adobe Photoshop Elements 12 Editor.app/Contents/MacOS/Adobe Photoshop Elements 12 Editor
    Identifier:      com.adobe.pse12editor
    Version:         12.0 (12)
    App Item ID:     768610744
    App External ID: 192852631
    Code Type:       X86-64 (Native)
    Parent Process:  launchd [183]
    Responsible:     Adobe Photoshop Elements 12 Editor [8051]
    User ID:         501
    Date/Time:       2014-12-09 15:39:07.636 -0800
    OS Version:      Mac OS X 10.9.5 (13F34)
    Report Version:  11
    Anonymous UUID:  5CB55135-E25F-5F46-8AFD-DCFF6AA2D896
    Sleep/Wake UUID: 6F9B30C1-17CE-4CF9-BB36-5A7BDB6B7C5C
    Crashed Thread:  0  Dispatch queue: com.apple.main-thread
    Exception Type:  EXC_BREAKPOINT (SIGTRAP)
    Exception Codes: 0x0000000000000002, 0x0000000000000000
    Application Specific Information:
    *** CFRelease() called with NULL ***
    Performing @selector(performAction:) from sender S4WCocoaPushButton 0x608000f72240

  • Program to take a screenshot and save it in a file

    Hi Experts,
    I have been asked to write a program that should be executed via an option on the sap-gui menu and that should take a screen shot of the current screen (whatever that is at the time of execution) and save it to a local folder with a default name.
    Any idea of how I could do this?  How do I take a screen shot of the current screen? 
    Many thanks,
    Brodo

    Hi Gustavo,
    Could you be more specific?  Which utility should I use?  I am not aware of any...
    Many thanks,
    Brodo

Maybe you are looking for

  • PDF to JPEG/TIFF book printing...

    Where are the folders supposed to be after you've selected the Save PDF to Folder as JPEG or TIFF? I've run this action a few times and I never get a Save dialog or folder that Spotlight can find. So, I guess this is not actually working here...? Any

  • Is is the right time to buy a 720?

    720 is on sale for about 11 months now & its perfect for me but for 512mb ram. with mwc 2014 it MAY get 1gb successor and ram matters even wid nokia apps (refocus,beamer) so shud i or shud i not buy 720 ryt now???

  • Audio doesn't work, wierd error messages

    Sorry for posting a seperate message, but I thought my problem might be different and a more general one. Since a few days, iChat audio is not working. I have a feeling this is since the last security update. Are you experiencing problems? So far I h

  • Finder open with option problem

    If I right/Control click on a file and go to the contextual menu Open With, there a multiple occurrences of the same application in the list e.g. use quicktime quicktime or quicktime. Not all application have multiple entries and which ever one I cho

  • Problem logging to the OC4J

    Hi can't login to the OC4J app server I get the error: This OC4J is configured to make JMX connections via RMIS and fall back to RMI if the RMIS port is not configured. The RMIS connection on the OC4J instance null on Application Server null is confi