Error at time releasing production order

Hi guru,
I am creating production order manually but at the time release i got error"No product cost collector could be deterimined for material " in material master i will check mRP -4 but there activation for REM. I am not get this exactly what happen, Pl do needful.
With regards,
Ravindra.

Dear Ravindra,
It seems for the production order type which you are using in CO01 has the order type dependent parameters where the check
box for product cost collector has been included (in the third tab - controlling).Check the setting in OPL8 for the production order
type which you are using to create the production order and the plant combination.
If it's included means you can remove this setting and try once again.
Check and revert
Regards
Mangalraj.S

Similar Messages

Cannot release production order for a plant

Hi:
When I try to release a process order , I get this error message:
"CAnnot release production order for plant".
I get this message for a particular material in the plant. For other materials, it's working fine.
Please give your suggestions!
Gautham

Hi,
Check the Tasklist usage for your routing for that material.
For this usage ,check in op45 against the task list type whether until release indicator has been enabled.If so remove
and do the release.
or
check whether workcenter which is used for producing the material has been locked in work center itself.
Indicator: Usage only until release in orderIndicator used to specify for a task list usage and a task list type that an operation in the order cannot be released. This occurs when a work center group that is not intended for production is allocated to this operation.
When this type of operation in the order is released you must enter the work center where production should take place.
Regards,
nandha

Material shortage ( soft or hard error ) while releasing production order?

Hi Guys
I am a SAP tech guy wrote a BDC program to release production order. It worked fine in one enviroment but not working another enviroment saying ..Material shortage.
My BDC program can't afford any hard errors in the process. The execution stop abruptly for any hard error.
How to change that Material shortage from hard error to soft error or any info message.
Any ideas? any thing to do with material master or spro?
Thanks
Hari

Hi
You can make settings in SPRO, so that the material availability check will not restrict you to go further...
follow the path:
SPRO>Production->Shop floor control>Operations->Availability Check-->Scope of check
There you will find the settings for order creation and release (1 & 2)..
You have remove the restriction there.
Regards
Bala

Abap dump error while release Production order

Dear Gurus,
Abap dump error is creating while release production order , pour some light on this issue.
Regards,
Kamal

Hello,
use transaction ST22 to analyze the error type. There you have the detail of the error message, the program and the line of the ABAP code where the dump was triggered.
Best regards,
Andrea

Error while releasing Production order

Dear experts
I am getting error "JV Object Type Is Required by JV Parameters for Company '1000'", message = Message no. GJ118 while releasing Production order. Plz help me on this issue.

Hi Harish,
Please refer the below link, hope should be helpful
Creating a Cost Center

Batch Determination at the time of Production Order Confirmation

Hi,
I am working with Batch Determination at Item Level.
I already have configured system to generate Batch Automatically at the Time of Production Order Release.
But now i want to generate Batch Automatically at the Time of Production Order Confirmation
Please help me with the necessary Configurations which would be required into achieving the same.
Thanks in advance.
Harris

Hi,
I have maintained the same for my Order Type in OPJ2 but still the same is not being picked at the time of Order Confirmation and it is being put to COGI mentioning the error as No batch specified in production order
Also if i try to Manually Select the Batch through in Goods Movt. of CO15 it is giving a msg that No Strategy could be found.
I have done following settings:
1. Have maintained Condn Records in MBC1 for the component whose batch is to be determined.
2. In material master in MRP2 Batch Determination: 2
3. In OPL8: Batch determination search procedure
4. In OPJ2: BD ticked for that relevant Order Type
5. In OPKP: Automatic Batch creation kept as BLANK.
Please support
Thanks
Harris

Serial number error while creating the production order

Hello frds,
I am getting the following error while creating the production order.
"Item 000000 requires exactly 100 serial numbers for the asset".
If i give 100 serial numbers in the order, the error is solved. But i do not want to assign 100 serial numbers, i want to assign only 2 numbers.
I have tried using the new serial number profile also, but it is giving same error.
Kindly guide.
Regards,
Narendra Bora

Dear Narendra
Select the serial number profile and go to serialization procedure and set the ser. usage status 02 - Optional as below.
Procd Procedure description Ser.Usage
PPRL PP order release 02
since the serail number creation is optional for order relase this will allow you to relase with out error and with serail number assigned in partial.
Regards
Soundar

Error While saving the Production Order

Dear Experts
Pls let me know why am getting the below error while saving the production order after release..
PSFC_STD_LAYOUT does not exist
Message no. SSFCOMPOSER004

Dear,
Please check have you assigned the scheduling profile in work scheduling view of materail master?
Then go to OPKP check the same scheduling profile where you have activited the On realese execute printing remove this tick mark and then try with new order.
Or you can do the configuration in Tocde :OPK8 here assign the PSFC_STD_LAYOUT in forum.
Regards,
R.Brahmankar

Wrong GL at the time of Production order

Hello
At the time of Production order settlement....its showing error that this GL is not possible to post automatically............there wrong GL(recon ac) have been assigned....where can i check this assignment in the system.................I have already checked it in OBYC.......but there i hv not found anything.......
regards

Hi Pari
Check the following accounts for the relevant Val Class
PRD-PRF (Variance acct) / GBB-AUA or AUF (COGM) /
Also check WIP Account as well as Change in WIP assigned in IMG
br, Ajay M

How get all released production orders

Hi experts,
I need to get all released Production Orders for a specific plant. I noticed that usually you don´t select directly from table AUFK. Most of people use function module WCFS_STTXT_GET to get the status of an order. I know that table AUFK has fields ASTNR (status) and PHAS1 (released) however those fields don't reflect the status of an order (thatu2019s why WCFS_STTXT_GET is used).
Also, I know that table JEST contains status for an order; however, for a simple order that table shows more than one status (I guess is like a history of all status the order had).
So my question is: How can I get all released orders for an specific plant? If I use WCFS_STTXT_GET I would have to select all orders and check the status one by one, which is obviously not efficient at all.
Thanks!

Hi Carlos,
As far as i know, it is not possible to get the latest status on a production order. if we see a production order in CO03, we see that all the status' are displayed on the order which it has been through.
I remember we had to include the system status logic similar to the transaction COHV, and we had used the table JEST for the same.
Kindly update the solution if you find any.
Thanks.

Change of sales order in combination with planned/released production order

Hi Guru's,
How do you deal with changes in the sales order in combination with planned orders and the scenario how to deal with release production orders?
Can you tell me the SAP scenario, technically or reports or transactions or user exits, etc?
Thank you in advance,
Eric

Here You have 2 scenarios
1. Sales order changed at planned order stage
In this case any chagne of quantity done in the sales order level will be taken care by the Planned order until it was not firmed .
In case if it was firmed for the increased qty you will get a new planned order getting created.
In case if it is reduced and if it was unfirmed it will get changed accordingly
2. Sales order changed at production order stage
if the planned order was converted to production order change we can manually changes the respective Production order util no confirmation was done to any operations..
is all this scenariors you are looking for if it is helpful let me know
thanks..
dskumar

Selection Of BOM & Routing at the time of production order creation

Hi guys,
Please clarify how i can go about for the following mentioned scenario
I have one Master BOM(Finished Product Level) & alternative BOMs for that,similarly i have one Master Routing & alternate routings for the same finished product
At the time of production order creation is it possible for me to choose one of the BOMs & One of the routings of that particular finished product without creating a production version?
Awaiting for a quick response
Vijai

Hi vijai prasad shanmugam ,
In the material master MRP-4 view under the BOM selection you can maintain on what fatcors you want the BOM to be selected Viz. Selection by order quant.,Selection by explosion date.Selection by production version etc.
As far as the master recipe is concerned ........ I guess that if there are more than one valid master recipe maintained then SAP will prompt to select the one manually.........
But it the standard practice to maintain the production version ....... for the similar situation to the one that you have mentioned.
Please Let me know if I can help you in any way regarding this........
Please reward the points......... in you find the ans helpful.....
Thanks
Kaushik

Allocation error when I create production order

Hi guys:
I met allocation error when I created production order with CO01.could you help me out?urgent!

hi
What is the excatly the error so that we can tell u the reason
regards
ramakant

Releasing production order using workflows from outlook.

Hi ,
i am working on workflows and my scenario is whenever production order creates it will send mail to approver in his/her outlook. And approver will approve/reject from outlook only by just clicking on approve or reject tab.
As of now mail is coming from SAP to outlook but the problem is how to release production order by just clicking on approve or reject tab in mail.
please help on this its urgent.
point will be awarded.
Edited by: Rahul Bhasin on Dec 27, 2007 7:00 AM

Hi satish,
Thanks for ur reply first .
as u told me create an event for relaesing production order , but as per my knowledge event are somethings that gets trigger at some point like creation , deletion. with events one cannot process things those are only for alerts so please confirm the same and how to process it.
Thanks,
Rahul

System Status WCRE is active unalbe to release production order

Unable to release production order,
System status is WCRE is active.

Hi
WCRE - Indicates Workcenter Until Release.
Please check the status of you work center
Go to CR03 transaction, In the Basic Data view check click on Admin Data to view the status if it is in Locked Status.
Regards
Venugopal

Error at time releasing production order

Similar Messages

Maybe you are looking for