Error attempting to apply a Solaris 10 release (upgrade)

I am trying to apply a Solaris 10 upgrade release to my E450 server, but get the following error:
"Could not reinitialize system state, please exit installer and try again"
The current release on the server is 10 1/06 and I am trying to move this to 10 6/06.
Anyone got any idea what it is complaining about, the process worked OK on my V480 servers!.

For anyone that gets the same issue, I found the problem to be my vfstab file.
I deleted all filesystems from it apart from the system areas / /usr /var and swap and the install process worked.
Cannot see anything wrong with the entries that were in the vfstab file, so I guess it is some kind of bug in the upgrade program.

Similar Messages

  • Open pdf says "please fill out the following form" when I attempt to apply redactions, I get an error message.  How do I "turn off" the form portion of the document?  I assume that is the problem since I have not had this issue with any of the other files

    I am attempting to redact a large pdf file.  When I open the file, it has a bar across the top with the message "please fill out the following form".  I can mark redactions, but when I attempt to apply them I get a message saying, "In order to proceed Digital Signatures must be removed and the document must be fully authorized.  Do you want to make these changes and continue?"   I click "ok".  Then I get a message saying, "an internal error occurred."  How do I get around this problem?

    You cannot redact a signed document. This is because one of the things signatures guarantee is access to the OLDER document (i.e. there will be an unredacted copy in there).
    In general you cannot remove signatures, but sometimes you can. Look under the Signatures tab (right click on left vertical bar if there isn't one) to see if it is removable.

  • Upgrade from Solaris 11 Express to Solaris 11 Release(11/11)  ERROR/PROBLEM

    Hi,
    I am getting problems upgrading my Oracle Solaris 11 Express production system to Solaris 11.
    I follow the steps in: http://docs.oracle.com/cd/E23824_01/html/E24456/upgrade-2.html#scrolltoc
    But I'm stuck in this error message:
    $ pfexec pkg update
    Creating Plan /
    pkg update: No solution was found to satisfy constraints
    Plan Creation: Package solver has not found a solution to update to latest available versions.
    This may indicate an overly constrained set of packages are installed.
    latest incorporations:
    pkg://solaris/consolidation/cde/[email protected],5.11-0.175.0.0.0.0.0:20110927T191905Z
    pkg://solaris/[email protected],5.11-0.175.0.0.0.2.0:20111020T143822Z
    pkg://solaris/consolidation/ips/[email protected],5.11-0.175.0.0.0.2.2576:20111020T063559Z
    pkg://solaris/consolidation/X/[email protected],5.11-0.175.0.0.0.0.1215:20110927T121319Z
    pkg://solaris/consolidation/SunVTS/[email protected],5.11-0.172.0.0.0.0.0:20110816T071310Z
    pkg://solaris/consolidation/nvidia/[email protected],5.11-0.175.0.0.0.0.0:20110927T192422Z
    pkg://solaris/consolidation/sunpro/[email protected],5.11-0.174.0.0.0.0.0:20110921T184135Z
    pkg://solaris/consolidation/osnet/[email protected],5.11-0.175.0.0.0.2.1:20111019T053010Z
    pkg://solaris/consolidation/cns/[email protected],5.11-0.175.0.0.0.1.0:20111012T230319Z
    pkg://solaris/consolidation/l10n/[email protected],5.11-0.175.0.0.0.1.765:20111012T043917Z
    pkg://solaris/consolidation/gfx/[email protected],5.11-0.175.0.0.0.2.0:20111019T144752Z
    pkg://solaris/consolidation/cacao/[email protected],5.11-0.174.0.0.0.0.0:20110921T190516Z
    pkg://solaris/consolidation/xvm/[email protected],5.11-0.175.0.0.0.2.0:20111019T144757Z
    pkg://solaris/consolidation/gnome_l10n/[email protected],5.11-0.175.0.0.0.0.0:20110927T081833Z
    pkg://solaris/consolidation/nspg/[email protected],5.11-0.175.0.0.0.2.0:20111019T144753Z
    pkg://solaris/consolidation/jdmk/[email protected],5.11-0.173.0.0.0.0.0:20110828T210111Z
    pkg://solaris/consolidation/sic_team/[email protected],5.11-0.172.0.0.0.0.0:20110816T070737Z
    pkg://solaris/consolidation/solaris_re/[email protected],5.11-0.175.0.0.0.2.0:20111019T122734Z
    pkg://solaris/consolidation/man/[email protected],5.11-0.175.0.0.0.0.0:20110927T192523Z
    pkg://solaris/consolidation/install/[email protected],5.11-0.175.0.0.0.2.1482:20111019T122620Z
    pkg://solaris/consolidation/hcts/[email protected],5.11-0.154:20101203T190542Z
    pkg://solaris/consolidation/vpanels/[email protected],5.11-0.175.0.0.0.1.778:20111012T230640Z
    pkg://solaris/consolidation/ub_javavm/[email protected],5.11-0.175.0.0.0.2.0:20111019T144756Z
    pkg://solaris/consolidation/gnome/[email protected],5.11-0.175.0.0.0.0.0:20110927T081825Z
    pkg://solaris/consolidation/dbtg/[email protected],5.11-0.175.0.0.0.2.0:20111019T144751Z
    pkg://solaris/consolidation/sfw/[email protected],5.11-0.175.0.0.0.2.0:20111019T144754Z
    pkg://solaris/consolidation/admin/[email protected],5.11-0.175.0.0.0.2.0:20111019T144751Z
    Dependency analysis is unable to determine exact cause.
    Try specifying expected results to obtain more detailed error messages.
    What I could do?
    Thanks in advance.

    It was some time ago but I recall getting a similar message when I did the update. If I remember correctly, I had some old OpenSolaris packages installed which I had to remove before I could get the Solaris 11 update to complete. I suspect the old OpenSolaris packages had requirements which were in conflict with the requirements of the newer Solaris 11 release and as a result pkg couldn't find a way to do the update while meeting all of the requirements imposed upon it.

  • Getting error during the Oracle9i installation "Oracle9i Database Release 2 (9.2.0.1.0) for Compaq Tru64 machine"

    Hi All,
    Getting follwing error during the Oracle9i installation “Oracle9i Database Release 2 (9.2.0.1.0) for Compaq Tru64 machine"
    u01/app/oracle/product/9.2.0/install/make.log
    - Linking Oracle
    rm -f /u01/app/oracle/product/9.2.0/rdbms/lib/oracle
    cc  -L/u01/app/oracle/product/9.2.0/lib/ -L/u01/app/oracle/product/9.2.0/rdbms/lib -o /u01/app/oracle/product/9.2.0/rdbms/lib/oracla
    ld:
    load_whole_file: Could not malloc 31328. bytes, for /u01/app/oracle/product/9.2.0/lib//libn9.a(asndata.o), didnt attempt to mmap
    Stop.
    *** Exit 1
    While checked the memory details in the machine its showing plenty of free virtual memory.
    # ps aux
    USER PID %CPU %MEM   VSZ  RSS TTY      S STARTED         TIME COMMAND
    oracle     1353 0.6 27.2  601M 555M pts/2    S N  09:14:07 5:49.67 /tmp/OraInstall2014-01-21_09-14-02AM/jre/bin/../bin/alpha/native_threads/java -Doracle.installe
    root       3033 0.0  0.4 10.4M 7.7M pts/0    R  + 10:59:44 0:00.06 ps aux
    oracle     1351 0.0  0.0 2.46M 320K pts/2    I N  09:14:02 0:01.36 ksh /tmp/OraInstall2014-01-21_09-14-02AM/installer -Doracle.installer.library_loc=/tmp/OraInsta
    oracle     1277 0.0  0.0 2.48M 312K pts/2    I  + 09:02:44 0:00.04 -ksh (ksh)
    root       1269 0.0  0.0 2.56M 232K pts/2    I    09:01:23 0:00.01 -sh (sh)
    root       1268 0.0  0.0 5.31M 768K ??       I    09:01:22 0:00.11 /usr/bin/X11/xterm -ls
    root 1  0.0  0.0  608K  96K ?? IL   08:45:31     0:00.08 /sbin/init -a
    root 0  0.0  3.9 2.52G  79M ?? R <  08:45:31     0:23.16 [kernel idle]
    And I have rebooted the machine still also getting the same error.
    Is there any way to resolve this issue??
    Regards
    prasanta

    Pl elaborate the business / technical reason for installing a 15+ year old unsupported software on a 15+ year old unsupported hardware, assuming you are installing an a supported OS version
    HTH
    Srini

  • 3750x Stack UTIL-3-TREE: Data structure error--attempt to remove an unthreaded node from a tree

    A Cisco Stack 3750X switch report the following error message:
    %UTIL-3-TREE: Data structure error--attempt to remove an unthreaded node from a tree.
    every minute +-20 sec
    Cisco IOS Software, C3750E Software (C3750E-IPBASEK9-M), Version 15.0(2)SE4, RELEASE SOFTWARE (fc1)
    analog bug: https://tools.cisco.com/bugsearch/bug/CSCsz93221

    WS-C3750G-24PS-E C3750-IPBASEK9-M version 12.2(53)SE2
    After implementing 802.1x with Avaya IP phones
    %UTIL-3-TREE: Data structure error--attempt to remove an unthreaded node from a tree
    Port then fails authentication and goes into vl-err-dis

  • Error occurs when applying pre-install task of patch 9239089

    Error occurs when applying pre-install task of patch 9239089
    ----------------------------------Pre-install Tasks--------------------------------------
    4. Use SQL*Plus to run the script:
    UNIX:
    $ sqlplus /nolog
    SQL> @$ORACLE_HOME/appsutil/admin/adgrants.sql <APPS schema name>
    ----------------------------------error message---------------------------------------
    End of Creating PL/SQL Package AD_DBMS_METADATA.
    DECLARE
    ERROR at line 1:
    ORA-20000: ORA-00933: SQL command not properly endedError in
    ad_grants.Give_grants
    ORA-06512: at line 685
    Commit complete.
    Disconnected from Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - 64bit Production
    With the Partitioning, OLAP, Data Mining and Real Application Testing options
    Thanks,
    Jackie

    Jackie,
    $ sqlplus /nolog
    SQL> @$ORACLE_HOME/appsutil/admin/adgrants.sql <APPS schema name> You need to run the script as follows (replace <APPS schema name> with apps):
    SQL> @$ORACLE_HOME/appsutil/admin/adgrants.sql appsThanks,
    Hussein

  • Error "Failed to apply XSLT to the content."

    Hello all
    Good Day!
    When i am trying to apply my XSLT script to XML Viewer, I'm getting the given below error :
    "Failed to apply XSLT to the content".
    Kindly need your help.

    Hi Rachna,
    According to your description, my understanding is that the error occurred when you applied XSLT script to XML Viewer web part.
    This issue may be caused by a recent published security fix for the .NET Framework 3.5.1.
    For SharePoint 2010 there is now a re-released fix out to resolve the problem.
    See here for more: KB 2872441 - Microsoft SharePoint applications may encounter errors while executing web
    parts.
    More reference:
    http://blogs.technet.com/b/steve_chen/archive/2013/07/31/3587795.aspx
    Best regards.
    Thanks
    Victoria Xia
    TechNet Community Support

  • Error -- Attempt to select Item, "string-udp" failed [Item::unionItem]

    After applying a signature update several times when i use the 5.0(1c) it returns:
    Error: Exception Error: Error -- Attempt to select Item, "string-udp" failed [Item::unionItem]
    There is no action in teh signatures.
    I do not know what to check. Any help????

    log in with the service account and check if the file /usr/cids/idsRoot/var/updates/50sig/50Sig.tar.gz exists. If it doesn't, you ran into CSCsb91681 and will need to (1)install a signature update, (2) reset all sigs to default settings, and (3) try to apply the 5.0(1c) upgrade again.

  • Upgrade from Solaris 11 Express to Solaris 11 Release (11/11); Guide MIA?

    Would there be an easy way to upgrade from Solaris 11 Express to Solaris 11 Release (11/11)? The FAQ for Solaris 11 Release has the following hopeful text:
    Can I upgrade to Oracle Solaris 11 from Oracle Solaris 11 Express or Oracle Solaris 11 Early Adopter?
    Yes. Customers can upgrade to Oracle Solaris 11 by using the package management tools. Refer to the Oracle Solaris 11
    Transition Guide (http://www.oracle.com/pls/topic/lookup?ctx=E23824&id=MF JAI) for more information
    But that link comes up with an error page 404, "topic not found".
    The one transition guide I can find is:
    http://download.oracle.com/docs/cd/E23824_01/html/E21799/index.html
    But that covers Solaris 10 jumpstart, not Solaris 11 Express or Early Adopter.
    The Solaris 11 documentation at:
    http://www.oracle.com/technetwork/server-storage/solaris11/documentation/index.html
    Also seems to mention only Solaris 10, not 11 Express or Early Adopter.
    I have already downloaded the full repo for Solaris 11 Release, and the live installer, but I'm hoping it's something as simple as pointing the ips manager to a new repository, or just loading the full repo I already have as a local source. I would also like to keep the dtrace and sun studio set up I have now in the Express version, without reinstalling them on a new release version on bare metal.
    If it keeps the features of the express version while ironing out a few kinks (gdm authentication bug, etc.), that would rock.
    Many Thanks,
    Gordon

    Alan, Thank You, that worked with no problem at all. 11 Express was already using the correct repository, and only required a pkg command update, then other updates.
    So here's what I'm guessing:
    1. The Oracle Solaris maintained repository for Express and Early Adopter are now the same as Release, but they do require an updated pkg executable and pkg update command.
    2. The second form of the command mentioned in the update guide:
    # pkg set-publisher -g http://pkg.oracle.com/solaris/release
    -G http://internal.co.com/solaris solaris
    is for using a local copy of the repository within our lan or vpn wan.
    3. Updates should be fairly regular now that Solaris 11 is in release version.
    I think the new hash (SHA 256) fried some of our old gdm settings for our users, so we're creating new user accounts, and migrating the older accounts. We don't have too many, so it's not a problem for us. But that brings up another point:
    4. The graphical user manager in Express is now gone, and user and group management are now done with command line interface.
    That's fine with me as well. I always use ssh to connect to the machine and then run the screen command for administration. The graphical user manager was always kludgy in Express, and I couldn't get it to work correctly anyway.
    This is great stuff so far. Well done.
    Gordon

  • Please help me resolve the Lync server 2013 deployment error: "An error occurred while applying SQL script for the feature BackendStore."

    I am getting an error in "Step 2 - Setup or Remove Lync Server Components" of "Install or Update Lync Server System" step.
    "An error occured while applying SQL script for the feature BackendStore. For details, see the log file...."
    Additionally, all previous steps such as: Prepare Active Directory, Prepare first Standard Edition server, Install Administrative Tools, Create and publish topology are done without any errors. The user that I used to setup the Lync server is member of:
    Administrators
    CSAdministrator
    Domain Admins
    Domain Users
    Enterprise Admins
    Group Policy Creator Owners
    RTCComponentUniversalServices
    RTCHSUniversalServices
    RTCUniversalConfigReplicator
    RTCUniversalServerAdmins
    Schema Admins
    I have tried to re-install all the things and started to setup a new one many times but the same error still occurred. Please see the log below and give me any ideas/solutions to tackle this problem.
    ****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.BlobStore'****
    Initializing DbSetupBase
    Parsing parameters...
    Found Parameter: SqlServer Value lync.lctbu.com\rtc.
    Found Parameter: SqlFilePath Value C:\Program Files\Common Files\Microsoft Lync Server 2013\DbSetup.
    Found Parameter: Publisheracct Value LCTBU\RTCHSUniversalServices;RTC Server Local Group;RTC Local Administrators;LCTBU\RTCUniversalServerAdmins.
    Found Parameter: Replicatoracct Value LCTBU\RTCHSUniversalServices;RTC Server Local Group.
    Found Parameter: Consumeracct Value LCTBU\RTCHSUniversalServices;RTC Server Local Group;RTC Local Read-only Administrators;LCTBU\RTCUniversalReadOnlyAdmins.
    Found Parameter: DbPath Value D:\CsData\BackendStore\rtc\DbPath.
    Found Parameter: LogPath Value D:\CsData\BackendStore\rtc\LogPath.
    Found Parameter: Role Value master.
    Trying to connect to Sql Server lync.lctbu.com\rtc. using windows authentication...
    Sql version: Major: 11, Minor: 0, Build 2100.
    Sql version is acceptable.
    Validating parameters...
    DbName rtcxds validated.
    SqlFilePath C:\Program Files\Common Files\Microsoft Lync Server 2013\DbSetup validated.
    DbFileBase rtcxds validated.
    DbPath D:\CsData\BackendStore\rtc\DbPath validated.
    Effective database Path: \\lync.lctbu.com\D$\CsData\BackendStore\rtc\DbPath.
    LogPath D:\CsData\BackendStore\rtc\LogPath validated.
    Effective Log Path: \\lync.lctbu.com\D$\CsData\BackendStore\rtc\LogPath.
    Checking state for database rtcxds.
    Checking state for database rtcxds.
    State of database rtcxds is detached.
    Attaching database rtcxds from Data Path \\lync.lctbu.com\D$\CsData\BackendStore\rtc\DbPath, Log Path \\lync.lctbu.com\D$\CsData\BackendStore\rtc\LogPath.
    The operation failed because of missing file '\\lync.lctbu.com\D$\CsData\BackendStore\rtc\DbPath\rtcxds.mdf'
    Attaching database failed because one of the files not found. The database will be created.
    State of database rtcxds is DbState_DoesNotExist.
    Creating database rtcxds from scratch. Data File Path = D:\CsData\BackendStore\rtc\DbPath, Log File Path= D:\CsData\BackendStore\rtc\LogPath.
    Clean installing database rtcxds.
    Timeout expired.  The timeout period elapsed prior to completion of the operation or the server is not responding.
    ****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.RtcSharedDatabase'****
    Initializing DbSetupBase
    Parsing parameters...
    Found Parameter: SqlServer Value lync.lctbu.com\rtc.
    Found Parameter: SqlFilePath Value C:\Program Files\Common Files\Microsoft Lync Server 2013\DbSetup.
    Found Parameter: Serveracct Value LCTBU\RTCHSUniversalServices;RTC Server Local Group.
    Found Parameter: DbPath Value D:\CsData\BackendStore\rtc\DbPath.
    Found Parameter: LogPath Value D:\CsData\BackendStore\rtc\LogPath.
    Trying to connect to Sql Server lync.lctbu.com\rtc. using windows authentication...
    Sql version: Major: 11, Minor: 0, Build 2100.
    Sql version is acceptable.
    Validating parameters...
    DbName rtcshared validated.
    SqlFilePath C:\Program Files\Common Files\Microsoft Lync Server 2013\DbSetup validated.
    DbFileBase rtcshared validated.
    DbPath D:\CsData\BackendStore\rtc\DbPath validated.
    Effective database Path: \\lync.lctbu.com\D$\CsData\BackendStore\rtc\DbPath.
    LogPath D:\CsData\BackendStore\rtc\LogPath validated.
    Effective Log Path: \\lync.lctbu.com\D$\CsData\BackendStore\rtc\LogPath.
    Checking state for database rtcshared.
    Reading database version for database rtcshared.
    Database version for database rtcshared - Schema Version5, Sproc Version 0, Update Version 1.
    Thanks and Regards,
    Thanh Le

    Thanks Lạc
    Phạm 2
    I Had similar issue i end up uninstalling and reinstallting but same issue, then i change the drive but same issue. It was I/O issue. After adjusting my I/O it fix our issue and installation went on without any issue. 
    If any one using KVM here is detail article 
    We just  give this option cache=‘writeback
    using this article http://www.ducea.com/2011/07/06/howto-improve-io-performance-for-kvm-guests/ and http://itscblog.tamu.edu/improve-disk-io-performance-in-kvm/ this fix my issue thanks 

  • An error occurred while applying SQL script for the feature BackendStore.

    Hello,
    I am using my AD in Windows Azure VMs. I created new VM of A3 (4 cores, 7 GB Memory) Windows Server 2012 R2, Port 1433 MSSQL added, made it a member of Domain and planned to install first Lync Server 2013 on it.
    In "Setup or Remove Lync Server Components" of "Install or Update Lync Server System", got an Red Coloured text "An error
    occurred while applying SQL script for the feature BackendStore."
    I have not enabled monitoring and archiving server in topology builder. I added "Network Service" and assign "Full Control" in Security Permissions of "C:\CsData" and "C:\LyncShare".
    I executed the SQL Setup Wizard and upgraded any instance to 2012.
    Please guide.
    Thanks, Divyaprakash Koli

    Please check you have enough disk space for the disk where the folders are.
    Check view log for detailed log information.
    The following link is a similar thread for you to refer:
    http://social.technet.microsoft.com/Forums/lync/en-US/a3cb9ab0-7451-4df5-af96-3d2784d1b075/an-error-occurred-while-applying-sql-script-for-the-feature-backendstore-for-details-see-the-log?forum=lyncdeploy
    Lisa Zheng
    TechNet Community Support

  • [SOLVED]error: attempt to read or write outside of partition

    Hello, I update my system at least once a week, sometimes I run pacman -Syu more than that. So this system is no more than about 7 days behind what is available today.  Last time I did this the kernel got updated and it updated itself again or at least it just ran mkinitcpio, also my passwd and group changed, anything that was not represented in the pacnew version got a representation, this last one mainly featured a lot of changes to "/usr/bin/nologin" from the login false version, whatever it was, nothing that looks too fussy.
    Reboot just to see what will happen and I am greeted with this:
    Booting `Arch Linux, with Linux core repo kernel'
    Loading Linux core repo kernel ...
    error: attempt to read or write outside of partition
    Loading initial ramdisk ...
    unaligned pointer 0x1d
    Aborted. Press any key to exit.
    I happen to have a usb drive that has Arch Linux 3.11.6.-1-ARCH, so I put that in and get an environment I can work with. Chroot in and so I can run mkinitcpio -p linux, thinking that that is the problem, some error in the kernel, I actually end up using the command
    # /usr/lib/modules
    , since
    # mkinicpio -p linux
    won't run, it gives:
    ==> Building image from preset: /etc/mkinitcpio.d/linux.present: 'default'
    -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.config -g /boot/initramfs-linux.img
    hexdump: /boot/vmlinuz-linux: Input/output error
    ==> ERROR: invalid kernel specified: '/boot/vmlinuz-linux'
    ==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'fallback'
    -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.config -g /boot/initramfs-linux-fallback.img -S autodetect
    hexdump: /boot/vmlinuz-linux: Input/output error
    ==> ERROR: invalid kernel specified: '/boot/vmlinuz-linux'
    However,
    # mkinitcpio -g /boot/linux.img -k 3.14.6-1-ARCH
    will. Everything finishes with a success, exit out, reboot and bam, same message, so it is not the kernel at least not on its own.  Here is what my fstab looks like:
    # /etc/fstab: static file system information
    # <file system> <dir> <type> <options> <dump> <pass>
    # /dev/sda3
    UUID=4dbfa319-4f88-49c1-a595-27faabfe4f57 / ext3 rw,relatime,data=ordered 0 1
    # /dev/sda1
    UUID=4C05-1A6B /boot vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro 0 2
    # /dev/sda4 LABEL=home
    UUID=bff35508-596c-4d7c-a983-b6b0ddc4f6e2 /home ext3 rw,relatime,data=ordered 0 2
    # /dev/sda2
    UUID=e87030ad-3226-41e3-938a-5be3351e34ed none swap defaults 0 0
    #efivars
    efivarfs /sys/firmware/efi/efivars efivarfs defaults 0 0
    #MySQL, linux version
    tmpfs /var/lib/mysqltmp tmpfs rw,gid=89,uid=89,size=100m,mode=0750,noatime 0 0
    and my mkinitcpio.conf
    # vim:set ft=sh
    # MODULES
    # The following modules are loaded before any boot hooks are
    # run. Advanced users may wish to specify all system modules
    # in this array. For instance:
    # MODULES="piix ide_disk reiserfs"
    MODULES=""
    # BINARIES
    # This setting includes any additional binaries a given user may
    # wish into the CPIO image. This is run last, so it may be used to
    # override the actual binaries included by a given hook
    # BINARIES are dependency parsed, so you may safely ignore libraries
    BINARIES=""
    # FILES
    # This setting is similar to BINARIES above, however, files are added
    # as-is and are not parsed in any way. This is useful for config files.
    FILES=""
    # HOOKS
    # This is the most important setting in this file. The HOOKS control the
    # modules and scripts added to the image, and what happens at boot time.
    # Order is important, and it is recommended that you do not change the
    # order in which HOOKS are added. Run 'mkinitcpio -H <hook name>' for
    # help on a given hook.
    # 'base' is _required_ unless you know precisely what you are doing.
    # 'udev' is _required_ in order to automatically load modules
    # 'filesystems' is _required_ unless you specify your fs modules in MODULES
    # Examples:
    ## This setup specifies all modules in the MODULES setting above.
    ## No raid, lvm2, or encrypted root is needed.
    # HOOKS="base"
    ## This setup will autodetect all modules for your system and should
    ## work as a sane default
    # HOOKS="base udev autodetect block filesystems"
    ## This setup will generate a 'full' image which supports most systems.
    ## No autodetection is done.
    # HOOKS="base udev block filesystems"
    ## This setup assembles a pata mdadm array with an encrypted root FS.
    ## Note: See 'mkinitcpio -H mdadm' for more information on raid devices.
    # HOOKS="base udev block mdadm encrypt filesystems"
    ## This setup loads an lvm2 volume group on a usb device.
    # HOOKS="base udev block lvm2 filesystems"
    ## NOTE: If you have /usr on a separate partition, you MUST include the
    # usr, fsck and shutdown hooks.
    HOOKS="base udev autodetect modconf block filesystems keyboard fsck"
    # COMPRESSION
    # Use this to compress the initramfs image. By default, gzip compression
    # is used. Use 'cat' to create an uncompressed image.
    #COMPRESSION="gzip"
    #COMPRESSION="bzip2"
    #COMPRESSION="lzma"
    #COMPRESSION="xz"
    #COMPRESSION="lzop"
    #COMPRESSION="lz4"
    # COMPRESSION_OPTIONS
    # Additional options for the compressor
    #COMPRESSION_OPTIONS=""
    While I am here I might as well ask this is this an appropriate boot structure?
    /boot/
    >>>>/EFI/
    >>>>/>>>/grub/
    >>>>/>>>/>>>>grubx64.efi
    >>>>/grub
    >>>>/>>>>/fonts
    >>>>/>>>>/grub.cfg
    >>>>/>>>>/grub.cfg.example
    >>>>/>>>>/grubenv
    >>>>/>>>>/local
    >>>>/>>>>/>>>>/*.mo files
    >>>>/>>>>/themes/
    >>>>/>>>>/>>>>>>/starfield/*.png *.pf2 files
    >>>>/>>>>/x86_64-efi
    >>>>/>>>>/>>>>>>>/ *.mod files
    >>>>/initramfs-linux-fallback.img
    >>>>/initramfs-linux.img
    >>>>/linux.img
    >>>>/vmlinuz-linux
    Anyone have any ideas on what I can do to get my system back?
    Last edited by Never (2014-06-11 03:17:24)

    Inside of my rescue disk I get:
    # efibootmgr
    BootCurrent: 000A
    Timeout: 0 seconds
    BootOrder: 0005,0003,0001,0002,000A,0004,0000,0007,0008,0009
    Boot0000 Windows Boot Manager
    Boot0001* USB Flopp/CD
    Boot0002* USB Hard Drive
    Boot0003* arch_grub
    Boot0004* ATAPI CD-ROM Drive
    Boot0005* grub
    Boot0007* CD/DVD Drive
    Boot0008* USB Floppy/CD
    Boot0009* Hard Drive
    Boot000A* UEFI: SanDisk Cruzer Glide 1.26
    my /dev/sda1 was /boot/ not /boot/efi, so I made that change, allowing /boot on / [/dev/sda3] to now be populated with part of the stuff on /dev/sda1 and /dev/sda1 would just have /boot/efi/, instead of all of boot, then ran:
    # modprobe -r efivars
    # umount /sys/firmware/efi/efivars
    # modprobe -r efivarfs
    # modprobe efivarfs
    # mount -t efivarfs efivarfs /sys/firmware/efi/efivars
    # efivar -l
    returned a bunch of variables
    # grub-install --target=x86_64-efi --efi-directory=/boot/efi --bootloader-id=grub --recheck --debug
    # grub-mkconfig -o /boot/grub/grub.cfg
    # efibootmgr
    BootCurrent: 000A
    Timeout: 0 seconds
    BootOrder: 0003,0001,0002,000A,0004,0000,0007,0008,0009
    Boot0000 Windows Boot Manager
    Boot0001* USB Flopp/CD
    Boot0002* USB Hard Drive
    Boot0003* grub
    Boot0004* ATAPI CD-ROM Drive
    Boot0007* CD/DVD Drive
    Boot0008* USB Floppy/CD
    Boot0009* Hard Drive
    Boot000A* UEFI: SanDisk Cruzer Glide 1.26
    arch_grub, whatever that was, went away. Pull out of arch-chroot, unmount sdaXs, reboot and:
    ERROR: No boot disk has been detected or the disk has failed.
    An extensive hp diagnostic check reveals... Nothing wrong.
    A reboot and removal of all data written in /dev/sda1 and /dev/sda3/boot sectors reveals:
    # mkdir /boot/efi/123
    mkdir: cannot create directory /boot/efi/123: Cannot allocate memory
    Which persist even on a restart and trying to mkdir into /mnt/arch/boot/efi/EFI while outside of arch-chroot. No idea why that is happening, oh well.

  • Error attempting to process incomplete inbound FTP file

    We are currently receiving some large files into PI via FTP.  Here is the communication channel definition:
    Adapter Type:  File
    Transport Protocol:  File System (NFS)
    Message Protocol:  File
    Adapter Engine:  Integration Server
    Poll Interval (secs):  600
    Msecs to Wait Before Modification Check:  10000
    Our issue is that at times PI attempts to process the file before it has completed uploading, and throws this error:  "Attempt to send file failed because file was modified during processing. 2428928 bytes expected, 2675033 bytes found. Trying to resend file".  The next time the file system is polled for new files, PI selects and processes the file successfully. 
    Two questions:
    1)  Is it possible for PI to wait until the upload has fully completed before it attempts to process the file?  For example, can I run an operating system command before message processing which attempts to put a lock on the file and waits until it is successful before the file is processed?
    2)  We have implemented alert monitoring from Solution Manager for errors in PI.  These cases are throwing an alert upon the initial error, but these turn out to be false since the message is eventually processed successfully.  Can I configure Solution Manager to bypass this type of error?
    Thank you very much for your help with this.

    Hi Mark,
    >>>1) Is it possible for PI to wait until the upload has fully completed before it attempts to process the file? For example, can I run an operating system command before message processing which attempts to put a lock on the file and waits until it is successful before the file is processed?
    there is an easy way to achive it
    put the file with a different name (let's say .lfg extension for flag)
    after the application finishes uploading make sure it will also change the name to .xml etc.
    inside PI file adapter specify to upload only .xml extensions - this way it will only take the whole file
    >>>>2
    as for solman question if you do like I suggest you will not have the errors in solman
    Regards,
    Michal Krawczyk

  • Audio in Solaris 10 release 08/07

    Hello
    I have just installed Solaris 10 release 08/07,After i installed successfully i noticed that it is not supportiing Audio that is when i clicked on the icon it is showing message like no audio device found and "/dev/audioctl" and further "/dev/sound". I don't know how to rectify this.
    My System:
    Lenovo 3000H 8789 Q62
    And Audio Vendor:
    Realtek ALC655
    Audio configuration using "prtconf -pv" :
    Node 0x00000b
    assigned-addresses: 81001710.00000000.0000e800.00000000.00000100.81 001714.00000000.0000ec00.00000000.00000080
    reg: 00001700.00000000.00000000.00000000.00000000.01001710.00000000 .00000000.00000000.00000100.01001714.00000000.00000000.00000000.00000080
    compatible: 'pci1039,7012.1019.6666.a0' + 'pci1039,7012.1019.6666' + 'pci1019,6666' + 'pci1039,7012.a0' + 'pci1039,7012' + 'pciclass,040100' + 'pcic lass,0401'
    model: 'Audio device'
    power-consumption: 00000001.00000001
    fast-back-to-back:
    devsel-speed: 00000001
    interrupts: 00000003
    max-latency: 0000000b
    min-grant: 00000034
    subsystem-vendor-id: 00001019
    subsystem-id: 00006666
    unit-address: '2,7'
    class-code: 00040100
    revision-id: 000000a0
    vendor-id: 00001039
    device-id: 00007012
    name: 'pci1019,6666'
    I'm completely new to this platform. So please help me in datailed way.
    Expecting your Replies.
    Thank you for your kind attention.
    Edited by: selavkumar_ss on Sep 28, 2007 9:31 PM

    First of all there is a special doc DVD for Solaris 10 u4 (listed on the same page as installation DVD)
    Second - "release notes" stuff is always located on docs.sun.com
    http://docs.sun.com/app/docs/doc/820-1259
    http://docs.sun.com/app/docs/doc/820-0181

  • Org.apache.jasper.JasperException: Error: Attempt to clear a buffer that's

    Hi,
    All I am trying to do is execute a <jsp:forward page=""/> commend. The page I am refering to does exists and three other pages that have the same commend are able to forward to the said page with little issue. All the pages are in the same directory and the path indicator to them is correct. Any help in this matter will be highly appreciated.
    org.apache.jasper.JasperException: Error: Attempt to clear a buffer that's already been flushed
         at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:254)
         at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:295)
         at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:241)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:247)
         at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:193)
         at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:256)
         at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:643)
         at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:480)
         at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:995)
         at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:191)
         at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:643)
         at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:480)
         at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:995)
         at org.apache.catalina.core.StandardContext.invoke(StandardContext.java:2415)
         at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:180)
         at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:643)
         at org.apache.catalina.valves.ErrorDispatcherValve.invoke(ErrorDispatcherValve.java:171)
         at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:641)
         at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:172)
         at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:641)
         at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:480)
         at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:995)
         at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:174)
         at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:643)
         at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:480)
         at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:995)
         at org.apache.coyote.tomcat4.CoyoteAdapter.service(CoyoteAdapter.java:223)
         at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:594)
         at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.processConnection(Http11Protocol.java:392)
         at org.apache.tomcat.util.net.TcpWorkerThread.runIt(PoolTcpEndpoint.java:565)
         at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:619)
         at java.lang.Thread.run(Thread.java:534)

    jsp:forward always flushes the buffer before proceeding.
    Do you have a statement in your jsp like out.flush() before your use jsp:forward? If you do, try removing it

Maybe you are looking for

  • Weather to Upgrade Iphone 5 with ios 6.1.4 to ios 7 ?

    Hi, I am an Iphone 5 user in India and having the ios 6.1.4. Can i update to ios 7. I have been seeing on the net some mixed reactions and some problems faced . Should I update now or wait for some more time and allow the ios  7 to stabalise for Ipho

  • Need to invoke bean method prior to initial page

    I have a web application with a default welcome page (index.jsp) that automatically forwards to a page with JSF tags in it (home.jsp). I use: <jsp:forward page="home.faces" />to accomplish this. This works fine for rendering the JSF tags in the page

  • Problem starting with jwsdp2.0 to build a web service

    i am using application server 9 and jwsdp2.0 to start building web services but i am finding difficuilties to start. i read the documentation but could not deploy the example web services. Is there any tutorial so that i can write a simple web servic

  • Mapping between Business Partner and BDoc type BUPA_MAIN

    Hi Experts, When creating a business partner system automatically generates BUPA_MAIN as its BDoc type. Can some one please let me know the mapping between business partner and the BDoc type BUPA_MAIN. I mean to say how BUPA_MAIN(BDoc type) is gettin

  • Do you have stress queries

    Hi Gurus. We are in the process of testing 10g migration from 9i. We do not have a real test set up with full volume of data and load. The Company entrusted with me the smooth migration from 9i to 10g. In the absense of proper testing situation, I pl