Error attempting to mirror a SuSE Professional 9..3 site

Under Zenworks for Linux Management 7.0, I am attempting to mirror SuSE
Professional 9.3. The mirroring process abends when it encounters the
package FETCHMSTT.SH-52104. It does not appear to depend on which mirror
which I attempt to get the packages from since I get the same error on each
site. The error which I get is
* Retrieving information for the local server bundle
"/suse-93-i586/fetchmsttfonts.sh-52104"
Bundle "fetchmsttfonts.sh-52104" (catalog "suse-93-i586") has 2 files to
download.
Patch file "fetchmsttfonts.sh-52104" already exists locally (skipping
download).
Package file "fetchmsttfonts.sh 0-0 suse-93-i586 (noarch)" already
exists locally (skipping download).
* Connecting to the ZENworks Package Management service on the local server
Error: An error occurred while trying to add the patch
"fetchmsttfonts.sh-52104" to the bundle
"/suse-93-i586/fetchmsttfonts.sh-52104".
(com.novell.zenworks.zlman.services.pkgmgt.admin.D ataStoreFault={})
I modified the mirror software to exclude the package with the package name
but it errored during the initial validation phase. I found that the
package was part of the Post-Script bundle which I attempted to exclude but
it did not make any difference.
Any help would be greatly appreciated.
Kevin

> On Mon, 12 Sep 2005 12:35:14 GMT, [email protected] wrote:
>
> > Under Zenworks for Linux Management 7.0, I am attempting to mirror SuSE
> > Professional 9.3. The mirroring process abends when it encounters the
> > package FETCHMSTT.SH-52104. It does not appear to depend on which mirror
> > which I attempt to get the packages from since I get the same error on each
>
> hi.. this forum is for zenworks software package management which shipped
> with ZFD 4.x ZDM 6.5..
>
> I guess you have a problem with ZLM 7... so it would be best to ask a
> question in the zenworks linux management forums..
> --
>
Sorry, I did not relize that this was not th appropriate form based on the
name of the form.
Kevin
> Marcus Breiden
>
> Please change -- to - to mail me.
> The content of this mail is my private and personal opinion.
> http://www.edu-magic.net

Similar Messages

Error in shared lib on Suse 6.3 (Oracle 8.1.5)

Hello everybody,
after several attempts and studying the SuSE-Howto on installing Oracle 8.1.5 I finally suceeded. But whenever I want to connect to my database using sqlplus I get the following:
sqlplus: error in loading shared libraries: /opt/oracle/product/8.1.5/lib/libclntsh.8.0: undefined symbol:nauzaoss
How can I correct this ??
Would be fine if it goes without reinstalling, I installed it on a notebook (128MB RAM though) ;-))
Thank you for your support,
sascha

Did you apply the patches? To use Oracle 8.0.5 on a Linux 2.2 kernel you need to apply some patches for Oracle. You can get these from Technet

Error attempting to call WSDL in Livecycle form

Hi,
     I am trying to call a WSDL through a Livecycle generated form, but it shows an error saying "Error attempting to read from file".....(file name). I am previewing the form in Acrobat Professional 8. This is the case when I try execting the call at client. when I change it to run at server, I get the error "Couldn't post data to ''".
     I also tried to load the WSDL in the Webservice component in Workbench, but it failed to load and threw up an error message. Please help.
Thanks,
Nakul

Hi,
     I am trying to call a WSDL through a Livecycle generated form, but it shows an error saying "Error attempting to read from file".....(file name). I am previewing the form in Acrobat Professional 8. This is the case when I try execting the call at client. when I change it to run at server, I get the error "Couldn't post data to ''".
     I also tried to load the WSDL in the Webservice component in Workbench, but it failed to load and threw up an error message. Please help.
Thanks,
Nakul

Error when starting Mercury Quicke Test Professional

Hello,
I am executing the QTP scripts through eCATT. During execution I got an error ' Error when starting Mercury Quick Test Professional'.
Does anybody knows how to resove this?
Thanks,
Mahantesh

Hi,
This is a common problem if scripting is disabled either on server or on ur sapgui client.
for enabling at server got rz11 tcode and enter sapgui/user_scripting profile and enable scripting there.
Refer my sdn weblogs which shows minimum config for QTP and ECATT and also how to create and run the scripts.
/people/community.user/blog/2007/01/02/integrating-ecatt-mercury-qtp-part-1
/people/community.user/blog/2007/01/15/integrating-ecatt-mercury-qtp-part-2
Please reward points.

[SOLVED]error: attempt to read or write outside of partition

Hello, I update my system at least once a week, sometimes I run pacman -Syu more than that. So this system is no more than about 7 days behind what is available today. Last time I did this the kernel got updated and it updated itself again or at least it just ran mkinitcpio, also my passwd and group changed, anything that was not represented in the pacnew version got a representation, this last one mainly featured a lot of changes to "/usr/bin/nologin" from the login false version, whatever it was, nothing that looks too fussy.
Reboot just to see what will happen and I am greeted with this:
Booting `Arch Linux, with Linux core repo kernel'
Loading Linux core repo kernel ...
error: attempt to read or write outside of partition
Loading initial ramdisk ...
unaligned pointer 0x1d
Aborted. Press any key to exit.
I happen to have a usb drive that has Arch Linux 3.11.6.-1-ARCH, so I put that in and get an environment I can work with. Chroot in and so I can run mkinitcpio -p linux, thinking that that is the problem, some error in the kernel, I actually end up using the command
# /usr/lib/modules
, since
# mkinicpio -p linux
won't run, it gives:
==> Building image from preset: /etc/mkinitcpio.d/linux.present: 'default'
-> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.config -g /boot/initramfs-linux.img
hexdump: /boot/vmlinuz-linux: Input/output error
==> ERROR: invalid kernel specified: '/boot/vmlinuz-linux'
==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'fallback'
-> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.config -g /boot/initramfs-linux-fallback.img -S autodetect
hexdump: /boot/vmlinuz-linux: Input/output error
==> ERROR: invalid kernel specified: '/boot/vmlinuz-linux'
However,
# mkinitcpio -g /boot/linux.img -k 3.14.6-1-ARCH
will. Everything finishes with a success, exit out, reboot and bam, same message, so it is not the kernel at least not on its own. Here is what my fstab looks like:
# /etc/fstab: static file system information
# <file system> <dir> <type> <options> <dump> <pass>
# /dev/sda3
UUID=4dbfa319-4f88-49c1-a595-27faabfe4f57 / ext3 rw,relatime,data=ordered 0 1
# /dev/sda1
UUID=4C05-1A6B /boot vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro 0 2
# /dev/sda4 LABEL=home
UUID=bff35508-596c-4d7c-a983-b6b0ddc4f6e2 /home ext3 rw,relatime,data=ordered 0 2
# /dev/sda2
UUID=e87030ad-3226-41e3-938a-5be3351e34ed none swap defaults 0 0
#efivars
efivarfs /sys/firmware/efi/efivars efivarfs defaults 0 0
#MySQL, linux version
tmpfs /var/lib/mysqltmp tmpfs rw,gid=89,uid=89,size=100m,mode=0750,noatime 0 0
and my mkinitcpio.conf
# vim:set ft=sh
# MODULES
# The following modules are loaded before any boot hooks are
# run. Advanced users may wish to specify all system modules
# in this array. For instance:
# MODULES="piix ide_disk reiserfs"
MODULES=""
# BINARIES
# This setting includes any additional binaries a given user may
# wish into the CPIO image. This is run last, so it may be used to
# override the actual binaries included by a given hook
# BINARIES are dependency parsed, so you may safely ignore libraries
BINARIES=""
# FILES
# This setting is similar to BINARIES above, however, files are added
# as-is and are not parsed in any way. This is useful for config files.
FILES=""
# HOOKS
# This is the most important setting in this file. The HOOKS control the
# modules and scripts added to the image, and what happens at boot time.
# Order is important, and it is recommended that you do not change the
# order in which HOOKS are added. Run 'mkinitcpio -H <hook name>' for
# help on a given hook.
# 'base' is _required_ unless you know precisely what you are doing.
# 'udev' is _required_ in order to automatically load modules
# 'filesystems' is _required_ unless you specify your fs modules in MODULES
# Examples:
## This setup specifies all modules in the MODULES setting above.
## No raid, lvm2, or encrypted root is needed.
# HOOKS="base"
## This setup will autodetect all modules for your system and should
## work as a sane default
# HOOKS="base udev autodetect block filesystems"
## This setup will generate a 'full' image which supports most systems.
## No autodetection is done.
# HOOKS="base udev block filesystems"
## This setup assembles a pata mdadm array with an encrypted root FS.
## Note: See 'mkinitcpio -H mdadm' for more information on raid devices.
# HOOKS="base udev block mdadm encrypt filesystems"
## This setup loads an lvm2 volume group on a usb device.
# HOOKS="base udev block lvm2 filesystems"
## NOTE: If you have /usr on a separate partition, you MUST include the
# usr, fsck and shutdown hooks.
HOOKS="base udev autodetect modconf block filesystems keyboard fsck"
# COMPRESSION
# Use this to compress the initramfs image. By default, gzip compression
# is used. Use 'cat' to create an uncompressed image.
#COMPRESSION="gzip"
#COMPRESSION="bzip2"
#COMPRESSION="lzma"
#COMPRESSION="xz"
#COMPRESSION="lzop"
#COMPRESSION="lz4"
# COMPRESSION_OPTIONS
# Additional options for the compressor
#COMPRESSION_OPTIONS=""
While I am here I might as well ask this is this an appropriate boot structure?
/boot/
>>>>/EFI/
>>>>/>>>/grub/
>>>>/>>>/>>>>grubx64.efi
>>>>/grub
>>>>/>>>>/fonts
>>>>/>>>>/grub.cfg
>>>>/>>>>/grub.cfg.example
>>>>/>>>>/grubenv
>>>>/>>>>/local
>>>>/>>>>/>>>>/*.mo files
>>>>/>>>>/themes/
>>>>/>>>>/>>>>>>/starfield/*.png *.pf2 files
>>>>/>>>>/x86_64-efi
>>>>/>>>>/>>>>>>>/ *.mod files
>>>>/initramfs-linux-fallback.img
>>>>/initramfs-linux.img
>>>>/linux.img
>>>>/vmlinuz-linux
Anyone have any ideas on what I can do to get my system back?
Last edited by Never (2014-06-11 03:17:24)

Inside of my rescue disk I get:
# efibootmgr
BootCurrent: 000A
Timeout: 0 seconds
BootOrder: 0005,0003,0001,0002,000A,0004,0000,0007,0008,0009
Boot0000 Windows Boot Manager
Boot0001* USB Flopp/CD
Boot0002* USB Hard Drive
Boot0003* arch_grub
Boot0004* ATAPI CD-ROM Drive
Boot0005* grub
Boot0007* CD/DVD Drive
Boot0008* USB Floppy/CD
Boot0009* Hard Drive
Boot000A* UEFI: SanDisk Cruzer Glide 1.26
my /dev/sda1 was /boot/ not /boot/efi, so I made that change, allowing /boot on / [/dev/sda3] to now be populated with part of the stuff on /dev/sda1 and /dev/sda1 would just have /boot/efi/, instead of all of boot, then ran:
# modprobe -r efivars
# umount /sys/firmware/efi/efivars
# modprobe -r efivarfs
# modprobe efivarfs
# mount -t efivarfs efivarfs /sys/firmware/efi/efivars
# efivar -l
returned a bunch of variables
# grub-install --target=x86_64-efi --efi-directory=/boot/efi --bootloader-id=grub --recheck --debug
# grub-mkconfig -o /boot/grub/grub.cfg
# efibootmgr
BootCurrent: 000A
Timeout: 0 seconds
BootOrder: 0003,0001,0002,000A,0004,0000,0007,0008,0009
Boot0000 Windows Boot Manager
Boot0001* USB Flopp/CD
Boot0002* USB Hard Drive
Boot0003* grub
Boot0004* ATAPI CD-ROM Drive
Boot0007* CD/DVD Drive
Boot0008* USB Floppy/CD
Boot0009* Hard Drive
Boot000A* UEFI: SanDisk Cruzer Glide 1.26
arch_grub, whatever that was, went away. Pull out of arch-chroot, unmount sdaXs, reboot and:
ERROR: No boot disk has been detected or the disk has failed.
An extensive hp diagnostic check reveals... Nothing wrong.
A reboot and removal of all data written in /dev/sda1 and /dev/sda3/boot sectors reveals:
# mkdir /boot/efi/123
mkdir: cannot create directory /boot/efi/123: Cannot allocate memory
Which persist even on a restart and trying to mkdir into /mnt/arch/boot/efi/EFI while outside of arch-chroot. No idea why that is happening, oh well.

Error attempting to process incomplete inbound FTP file

We are currently receiving some large files into PI via FTP. Here is the communication channel definition:
Adapter Type: File
Transport Protocol: File System (NFS)
Message Protocol: File
Adapter Engine: Integration Server
Poll Interval (secs): 600
Msecs to Wait Before Modification Check: 10000
Our issue is that at times PI attempts to process the file before it has completed uploading, and throws this error: "Attempt to send file failed because file was modified during processing. 2428928 bytes expected, 2675033 bytes found. Trying to resend file". The next time the file system is polled for new files, PI selects and processes the file successfully.
Two questions:
1) Is it possible for PI to wait until the upload has fully completed before it attempts to process the file? For example, can I run an operating system command before message processing which attempts to put a lock on the file and waits until it is successful before the file is processed?
2) We have implemented alert monitoring from Solution Manager for errors in PI. These cases are throwing an alert upon the initial error, but these turn out to be false since the message is eventually processed successfully. Can I configure Solution Manager to bypass this type of error?
Thank you very much for your help with this.

Hi Mark,
>>>1) Is it possible for PI to wait until the upload has fully completed before it attempts to process the file? For example, can I run an operating system command before message processing which attempts to put a lock on the file and waits until it is successful before the file is processed?
there is an easy way to achive it
put the file with a different name (let's say .lfg extension for flag)
after the application finishes uploading make sure it will also change the name to .xml etc.
inside PI file adapter specify to upload only .xml extensions - this way it will only take the whole file
>>>>2
as for solman question if you do like I suggest you will not have the errors in solman
Regards,
Michal Krawczyk

Org.apache.jasper.JasperException: Error: Attempt to clear a buffer that's

Hi,
All I am trying to do is execute a <jsp:forward page=""/> commend. The page I am refering to does exists and three other pages that have the same commend are able to forward to the said page with little issue. All the pages are in the same directory and the path indicator to them is correct. Any help in this matter will be highly appreciated.
org.apache.jasper.JasperException: Error: Attempt to clear a buffer that's already been flushed
     at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:254)
     at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:295)
     at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:241)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:247)
     at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:193)
     at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:256)
     at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:643)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:480)
     at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:995)
     at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:191)
     at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:643)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:480)
     at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:995)
     at org.apache.catalina.core.StandardContext.invoke(StandardContext.java:2415)
     at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:180)
     at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:643)
     at org.apache.catalina.valves.ErrorDispatcherValve.invoke(ErrorDispatcherValve.java:171)
     at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:641)
     at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:172)
     at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:641)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:480)
     at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:995)
     at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:174)
     at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:643)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:480)
     at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:995)
     at org.apache.coyote.tomcat4.CoyoteAdapter.service(CoyoteAdapter.java:223)
     at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:594)
     at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.processConnection(Http11Protocol.java:392)
     at org.apache.tomcat.util.net.TcpWorkerThread.runIt(PoolTcpEndpoint.java:565)
     at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:619)
     at java.lang.Thread.run(Thread.java:534)

jsp:forward always flushes the buffer before proceeding.
Do you have a statement in your jsp like out.flush() before your use jsp:forward? If you do, try removing it

Web Service; Error attempting to read from file

I'm trying to connect to a web service as outlined by the book "Creating Dynamic Forms with Adobe LiveCycle Designer" which is an excellent book by the way.
I'm receiving the following error "Error attempting to read from file. http://www.webservicex.net/BibleWebservice.asmx"
I've successfully created the Data Connection to
http://www.webservicex.net/BibleWebservice.asmx?wsdl
I dragged and dropped the bookTitle, chapter & Versie onto the form. I also dragged and dropped the GetBibleWordsByChapterAndVerseResult and the GetBibleWordsByChapterAndVerseBtn.
I Preview PDF and click the button I get the above error.
Does anyone have experience using Web Services with Adobe LiveCycle ES and have advice on how to resolve this. Any Suggestions would be greatly appreciated.
-Todd

Well, I have more news on the error I'm getting. - NO I didn't find the problem. Yet
I checked and made sure that web.config had "None" selected " in authentication mode. I.E. <authentication mode="None" /> This should eliminate any authentication problems since that turns off IIS's authentication checking.
At first I was thinking the form was generating the error trying to read the result coming back from the web service, but I put in some code that writes the result to a log file when the method fires off.
I noticed that when I clicked on the button on the form, the error message would pop up from Acrobat, but when I check the log file, there was NO entry. This means that Acrobat failed before it could execute the method.
Here is the web method:
[WebMethod(CacheDuration = 30,
Description="Returns the String 'True' or 'False' whether or
not you entered a 'T' or 't'.")]
public string TF(string Tf)
string result="False";
if(Tf.Substring(0,1).ToLower()=="t"){
result= "True";}
LogFile.Write("Sent: "+result);
return result;

SSRS 2008 R2 - on Preview report in report builder itself, getting an error "Attempted to read or write protected memory. This is often an indication that other memory is corrupt". Any Suggestions please to resolve it?

Hi,
I am working on SSRS 2008 R2. On Preview report in report builder itself, i am getting an error "Attempted to read or write protected memory. This is often an indication that other memory is corrupt".
See my below screen shoot.
Any Suggestions please to resolve it?
thank you in advance !
best regards,
Venkat,
[email protected]

Hi Venkat,
According to the error message, I guess that the error occurred when you previewed the report in Business Intelligence Development Studio (BIDS).
Based on my research, I think it may be a Window Layout issue of Visual Studio. Please try the steps below:
Click “Window” button from the toolbar ribbon.
Click “Reset Windows Layout” option.
Click “Yes” to finish the operation.
The following thread is for your reference:
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/90949d68-a611-467c-b438-be97b8ab250b/attempted-to-read-or-write-protected-memory-this-is-often-an-indication-that-other-memory-is
Hope this helps.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

I just installed Lightroom 5 but can't import photos, there is no import option anywhere. Get pop-up saying error attempting to change modules ?? Any help with this??

I just installed Lightroom 5 but can't import photos, there is no import option anywhere. Get pop up saying error attempting to change modules.
I had this with the trial , then I purchased license and still happens. Any help with this ??

<moved from Downloading, Installing, Setting Up to Photoshop Lightroom>

"Error attempting to read file" at Webservice call from Adobe Form.

Hi Experts,
We have designed a Webservice form a Function Module in ECC 6.0, In the soamanager transaction the webservice works fine. But at the time of call from the Adobe form, it gives an error stating that "Error attempting to read from file" and then the URL of the Webservice to be excuted.
and if i attempt to open that file, it gives me this error:
- <soap-env:Envelope xmlns:soap-env="http://schemas.xmlsoap.org/soap/envelope/">
<soap-env:Header />
- <soap-env:Body>
- <soap-env:Fault>
<faultcode>soap-env:Server</faultcode>
<faultstring xml:lang="en">SRT: Wrong Content-Type and empty HTTP-Body received</faultstring>
- <detail>
- <ns:SystemFault xmlns:ns="http://www.sap.com/webas/710/soap/runtime/abap/fault/system/">
<Host>undefined</Host>
<Component>COREMSG</Component>
- <ChainedException>
<Exception_Name>CX_SOAP_CORE</Exception_Name>
<Exception_Text>SRT: Wrong Content-Type and empty HTTP-Body received</Exception_Text>
</ChainedException>
</ns:SystemFault>
</detail>
</soap-env:Fault>
</soap-env:Body>
</soap-env:Envelope>
In case I give my user the "SAP_ALL" role, this all works fine, so i think it is somewhere related to a missing role to be assigned.
any clues..??
any help would be appreciated, Please help..
Thanks,
Amita

Hi Juergen,
I am using it as a WSDL based data connection.
How do i check this WSDL through a web browser? I have checked it through SICF Transaction code, It gives the output in explorer as given in the first post of this thread..
Please help me resolving this issue, i feel that this issue is somewhere related to the role assignment of the user as if i provide this user an authorization of SAP_ALL then everything starts working fine, but after removing SAP_ALL this error is encountered, do u hav any pin points on this??
Thanks
Amita

OEM12c jobs fail with "Error attempting to invoke console command"

Hi gurus,
I'm wondering if someone could help me on this issue.
When I try to execute a job it remains in "Running" state for a long time periord and looking at the jobs details I can see something like this:
Execution: DB11G.WORLD
     DB11G.WORLD     Running     Aug 29, 2012 10:17:31 AM GMT+02:00          57.9 minutes
Step: DeployDriver     DB11G.WORLD     Scheduled
Doing drilldown in "Scheduled" hiperlynk the message displayed is that:
Error attempting to invoke console command, retrying
And this is the Tip offered by oem:
     TIP:      Management Service from which the job step was dispatched.
Everything seems to be working even the Management Service, but any job launched fail in the same way.
Environment:
Oem12c 12.1.0.1.0 with last patch
Oracle Linux 5.7
DB Oracle 11gr2
Any suggestion on this issue will be welcome.
Thanks,
Carlos.

Thanks Eric for your feedback.
It seems that the problem was related with target "Oracle Authorization Policy Manager" because this target was down and after restart OMS and check that this target was up again all pending jobs worked and finished.
However the job_queue_processes value was a good point to take into account so I increase this parameter just in case.
Thanks,
Carlos.
QUERY STATUS = SOLVED

3750x Stack UTIL-3-TREE: Data structure error--attempt to remove an unthreaded node from a tree

A Cisco Stack 3750X switch report the following error message:
%UTIL-3-TREE: Data structure error--attempt to remove an unthreaded node from a tree.
every minute +-20 sec
Cisco IOS Software, C3750E Software (C3750E-IPBASEK9-M), Version 15.0(2)SE4, RELEASE SOFTWARE (fc1)
analog bug: https://tools.cisco.com/bugsearch/bug/CSCsz93221

WS-C3750G-24PS-E C3750-IPBASEK9-M version 12.2(53)SE2
After implementing 802.1x with Avaya IP phones
%UTIL-3-TREE: Data structure error--attempt to remove an unthreaded node from a tree
Port then fails authentication and goes into vl-err-dis

Error 1901. Error attempting to read from the source installation database

OS: Windows 7 Enterprise 64-bit
Browsers: IE 9 and Firefox 10
Flash Version 11.7.700.169
I'm logged in as Administrator. I'm trying to install using this:
start "" /wait msiexec /i install_flash_player_11_active_x.msi /qb
and
start "" /wait msiexec /i install_flash_player_11_plugin.msi /qb
Both commands result in:
Error 1901. Error attempting to read from the source installation database: C:\Windows\Installer\3c0cc1.msi
(the file name seems to be random)
echo %errorlevel% returns 1603.
Help.

Not sure how much I can help you with this. Error 1603 usually indicates that the installer cannot proceed because something is in use; search this page for 1603: http://msdn.microsoft.com/en-us/library/windows/desktop/aa372835%28v=vs.85%29.aspx

Error attempting to write location redirection to web server (Windows NT error number -2147467259 occurred)

I'm seeing an error pop up on a development server... error
2408:
"Error attempting to write location redirection to web server
(Windows NT error number -2147467259 occurred)"
Any idea what this is? I can't seem to find anything
solid.

I'm having the same problem but it just started. Logged in last week from work computer running IE 8.0.8 with no problems. Today I keep getting problem connecting to server. Clicking on the error indicator gets me the same error.
Message: Object expected
Line: 5
Char: 1963
Code: 0
URI: https://setup.icloud.com/ajax_sender.html
Tried clearing browser history,cookies, etc.. nothing works.

Error attempting to mirror a SuSE Professional 9..3 site

Similar Messages

Maybe you are looking for