Error autentification BPC web

I have a problem with authentication through the web of BPC in my installation.
When I walk by http://servidor:port/Osoft
and indicates the user ID and Paswan, I get the following error:
"The user ID, password not can be authenticated. Make sure You entered valid credentials"
In contrast, if entered by the Client or BPC Excel interface I can validate without problems.
I tried with many users, and in all cases is the same.
BPC in the diagnosis of server, It is all ok
My environment is a migration of BPC7.0 NW BPC7.5 sp5 IIS 6 to IIS6 NW
Anyone can help
Thanks

Similar Messages

Work Status --ABAP error at BPC Web Interface

Hi,
I'm receiving an error in the Web Interface for adjusting
the Work Status settings. When selecting Active CV or Another CV and
then clicking on the arrow at right the error message that pops up
says:
Error: a dump occurred on the ABAP stack.
Thanks,

Hello - I received the same error message. I would look at the 'how to' paper on Work Status. It was very helpful.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/70f99970-8c09-2d10-d486-8989be63d8cc?QuickLink=index&overridelayout=true&47047071760394

Error Launching BPC Adminstrator & BPC Web

Hi All,
I have just installed BPC 5.1 and getting the following error when trying to launch BPC Administrator & BPC Web
"DetailMsg : {Index (zero based) must be greater than or equal to zero and less than the size of the argument list.}"

A Simple Restart did the magic.

UJP_EXCEPTION_050 error in BPC NW 10

Hello,
When running Ownership calculation in BPC Web, the following error message comes up
UJP_EXCEPTION_050 No range round for percentage in method table is generated.
Code = UJP_EXCEPTION_050
Description = No range found for percentage in method table
Enviroment: SAP BPC 10 NW SP03
My configuration:
Methods configuration
101 Holding                  H                              100
100 Global                   G       0.501<,1.00      100
50 Proporcional           P       0.25<,<=0.501   PCTRL
20 Equivalencia           E       0.20<,<=0.25     PCTRL
OwnerShip Manager configuration
Group /Entity       Consolidation Meth       Percent Mth         Percent Ctrl         Percent Ownhershi By group Share Meth
G_FOZ                  Ge -   Cu            Ge -   Cu          Ge -   Cu                   Ge -   Cu
   E100                 100 - 101             100 - 100           0 - 0                       0 - 0
   E200                 100 - 100             0 - 100             0 - 0                       0 - 0
   E200                 100 - 100             0 - 100             0 - 0                       0 - 0
Calculate ultimate %Ownership &....= Group Share Method
Calculate Method: Chek all
My ownership manager will be
Código
Denominación
Conso Method
Percent Con
1000
A
Full
92,26%
2000
B
Full
92,26%
3000
C
Full
92,26%
4000
D
Full
92,26%
5000
E
Full
90,41%
6000
F
Full
91,34%
7000
CREDITS
Holding
100,00%
Any suggest?
Thanks
Regards
Gustavo

Hola Gustavo.
please follow the steps
How to Calculate Ownership Data
1. Input Percent Control and Percent Ownership data into the Ownership
    Model.
     In the example below, you can see the web input form that was used.
     The Holding company (C9000) has 55 Percent Control over Germany and
     Germany(C1000) has 40 Percent Control over UK(C2000).
     The Holding company (C9000) has 70 Percent Ownership over Germany
     and Germany has 60 Percent Ownership over UK.
     Note: Percent Control is the description of the POWN account and
              Percent Ownership is the description of the POWN account.
     Note: The data is recorded against the Plan category since it is a test.
              An Excel input schedule could be used to enter the data as well.
2. Enter the Methods data as you see below for Share Range and Applicable
    Percent.
Figure: Methods
     Ownership calculations can now be executed and the system will propose
     which method to use based on Percent Control for example.
     Note: 0.75<,<=1.00 is interpreted as Greater than .75 but less than
               or equal to 1.00.
3. Access the Ownership Manger in edit mode.
Figure: Edit Mode - Initially
4. Add the members as shown below to the G_CG1 group.
Select the Consolidation Methods as shown below and save the data.
Figure: Ownership Structure
5. Calculate the Percent Control - Generated and Percent Ownership -
Generated values using the Direct Share Method.
Figure: Calculate Direct Share
This effectively copies the data entered in step one to the Percent Control -
Generated and Percent Ownership - Generated ownership accounts.
6. Calculate the Percent Control - Generated and Percent Ownership -
Generated values using the Group Share Method.
Figure
Figure: Calculate Group Share
The Group Share of C2000 is 22% Percent Control since C1000 only has
55% control (.55 x .40 = .22).
The Group Share of C2000 is 42% Percent Control since C1000 only has
70% ownership (.70 x .60 = .42).
7. Overwrite the Percent Ownership - Current using the Group Share Method.
Figure: Calculate Group Share and Overwrite POWN
The Percent Ownership - Current value is updated to 42% for C2000.
8. Update the Method, Percent Consolidation, and Percent Ownership values
using the Group Share Method.
Figure: Calculate Group Share and Update Method, PCON, and
POWN
The Method for C1000 is updated to Proportional since its Percent Control
falls between the range of .25 to .75 specified in the Methods above.
The Method for C2000 is updated to Equity since its Percent Control falls
between the range of .00 to .25 specified in the Methods above.
The Percent Control for C1000 is updated to .75 since its Percent Control
falls between the range of .25 to .75 specified in the Methods above.
The Percent Control for C2000 is updated to .25 since its Percent Control
falls between the range of .00 to .25 specified in the Methods above.
9. Update the methods and percentages based on the Direct Share Method
Figure: Calculate Direct Share and Update Method, PCON, and
POWN
The Method for C2000 is updated to Proportional since its Percent Control
falls between the range of .25 to .75 specified in the Methods above.
The Percent Control for C2000 is updated to .75 since its Percent Control
falls between the range of .25 to .75 specified in the Methods above.
10. Calculate group shares but do not update any other data.
Figure: Calculate Group Share
Now you can test updating methods and percentages based on previous
calculations.
11. Update methods and percentages based on previous calculations.
Figure: Update Method, PCON, and POWN Based on Previous
Calculation
Methods and percentages were updated based on the previous calculation.
Regards
Juan Pablo

BPC Web Page not access from Client

Dear Experts,
We have BPC QA system installed in multi environment DB server and APP server,
the issue is :
the BPC Web Page is able to access from App server localhost (http://appserver IP/osoft/)
but client not able to access the BPC Web Page from the client machine
it showing error bellow . I have check the security and .Net version in IIS and compare with BPC development which is installed in single environment without any issue, Kindly need advice on what
need to be check in the APP Server and DB server.
===========================
Server Error in '/OSoft' Application.
The request failed with HTTP status 401: Unauthorized.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Net.WebException: The request failed with HTTP status 401: Unauthorized.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[WebException: The request failed with HTTP status 401: Unauthorized.]
   System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall) +1303
   System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters) +218
   WebInfoService.WebInfoService.Query(String strQueryType, String strParameter, String strContext, String strSecurity) +98
   OSoft.Consumers.ZFP.WebBase.Utility.GetLastUserApp(CPMUser& mUser, String strAppServerURL, String strSecurity, String strContext, Boolean bServerPathReset) +1517
   OSoft.Consumers.ZFP.WebBase.PageBase.Page_Init(Object sender, EventArgs e) +219
   System.EventHandler.Invoke(Object sender, EventArgs e) +0
   System.Web.UI.Control.OnInit(EventArgs e) +67
   System.Web.UI.Control.InitRecursive(Control namingContainer) +241
   System.Web.UI.Page.ProcessRequestMain() +197
===============================================

Hi,
This error usually means that the user doesnt have the proper authorizations. So please login to the appset with the ADMIN ID and check the task profile and the member access profile of the user. Assign appropriate authorizations.
Hope this helps.

How can I display XSLT transformer errors on a web page ?

Hi,
I have some JSP pages that access DB, create an XML based on DB data and then transform it into HTML through an XSLT stylesheet. Developing the XSL code it's easy to make mistakes and generate errors on trasformation, but what I receive on the web page is only a "Could not compile stylesheet" TransformerConfigurationException, while the real cause of the error is displayed only on tomcat logs. This is the code for transformation:
static public void applyXSLT(Document docXML, InputStream isXSL, PrintWriter pw) throws TransformerException, Exception {
        // instantiate the TransformerFactory.
        TransformerFactory tFactory = TransformerFactory.newInstance();
        // creates an error listener
        XslErrorListener xel = new XslErrorListener();
        // sets the error listener for the factory
        tFactory.setErrorListener(xel);
        // generate the transformer
        Transformer transformer = tFactory.newTransformer(new SAXSource(new InputSource(isXSL)));
        // transforms the XML Source and sends the output to the HTTP response
        transformer.transform(new DOMSource(docXML), new StreamResult(pw));
}If an exception is thrown during the execution of this code, its error message is displayed on the web page.
This is the listener class:
public class XslErrorListener implements ErrorListener {
    public XslErrorListener() {
    public void warning(TransformerException ex) {
        // logs on error log
        System.err.println("\n\nWarning on XEL: " + ex.getMessage());
    public void error(TransformerException ex) throws TransformerException {
        // logs on error log
        System.err.println("\n\nError on XEL: " + ex.getMessage());
        // and throws it
        throw ex;
    public void fatalError(TransformerException ex) throws TransformerException {
        // logs on error log
        System.err.println("\n\nFatal Error on XEL: " + ex.getMessage());
        // and throws it
        throw ex;
}When I have an error in the XSL stylesheet (for examples a missing closing tag), I can find on tomcat logs the real cause of the error:
[Fatal Error] :59:10: The element type "table" must be terminated by the matching end-tag "</table>".
Error on XEL: The element type "table" must be terminated by the matching end-tag "</table>".but on my web page is reported just the TransformerConfigurationException message that is:
"Could not compile stylesheet".
How can I display the real cause of the error directly on the web page?
Thanks,
Andrea

This code is part of a bigger project that let developers edit XSL stylesheets through a file upload on the system and we can't impose the use of any tool for checking the xsl. So, I need to display the transformer error on the web page.I see. This code is part of an editorial/developmental tool for developers to create and edit XSL stylesheets.
As part of the editorial process, XSL errors during editing can be considered a normal condition. In other words, it is normal to expect that the developers will generate XSL errors as they are developing stylesheets.
In this light, handling the XSL transformation errors is a business requirement that you need to handle. Using the Java Exceptions mechanisms, e.g. try / catch are inappropriate to handle business requirements, in my opinion.
I suggest that you look at how you handle the occurence of XSL errors differently than what you currently have. You need to:
(1) capture the Transformation exception on the server;
(2) extract the message from the exception and put it into a message that can be easily understood by the user;
The current error message that you have going to the web browser is not useful.
And you should not have the Transformation exception sent to the web browser either.
What you are attempting to do with the exception is not appropriate.
Handle the Transformation exception on the Business tier and use it to create a useful message that is then sent to the Presentation tier. In other words, do not send Java exceptions to web browser.
/>

Error while running web application through JDEV (10.1.3.0.3) in OC4J

Error while running web application through JDEV (10.1.3.0.3) in OC4J.
Here is the error message.
07/10/02 14:45:28 Exception in thread "OC4J Launcher" oracle.classloader.util.AnnotatedNoClassDefFoundError:
     Missing class: javax.xml.bind.JAXBContext
     Dependent class: com.oracle.corba.ee.impl.orb.config.InternalSettingsORBConfigImpl
     Loader: oc4j:10.1.3
     Code-Source: /C:/jdev/j2ee/home/lib/oc4j-internal.jar
     Configuration: <code-source> in boot.xml in C:\jdev\j2ee\home\oc4j.jar
The missing class is not available from any code-source or loader in the server.
07/10/02 14:45:28      at oracle.classloader.PolicyClassLoader.handleClassNotFound (PolicyClassLoader.java:2073) [C:/jdev/j2ee/home/lib/pcl.jar (from system property java.class.path), by sun.misc.Launcher$AppClassLoader@7]
     at oracle.classloader.PolicyClassLoader.internalLoadClass (PolicyClassLoader.java:1681) [C:/jdev/j2ee/home/lib/pcl.jar (from system property java.class.path), by sun.misc.Launcher$AppClassLoader@7]
     at oracle.classloader.PolicyClassLoader.loadClass (PolicyClassLoader.java:1633) [C:/jdev/j2ee/home/lib/pcl.jar (from system property java.class.path), by sun.misc.Launcher$AppClassLoader@7]
     at oracle.classloader.PolicyClassLoader.loadClass (PolicyClassLoader.java:1618) [C:/jdev/j2ee/home/lib/pcl.jar (from system property java.class.path), by sun.misc.Launcher$AppClassLoader@7]
     at java.lang.ClassLoader.loadClassInternal (ClassLoader.java:319) [jre bootstrap, by jre.bootstrap]
     at com.oracle.corba.ee.impl.orb.config.InternalSettingsORBConfigImpl.init (InternalSettingsORBConfigImpl.java:46) [C:/jdev/j2ee/home/lib/oc4j-internal.jar (from <code-source> in boot.xml in C:\jdev\j2ee\home\oc4j.jar), by oc4j:10.1.3]
     at com.oracle.corba.ee.impl.orb.config.SunRIORBConfigImpl.init (SunRIORBConfigImpl.java:97) [C:/jdev/j2ee/home/lib/oc4j-internal.jar (from <code-source> in boot.xml in C:\jdev\j2ee\home\oc4j.jar), by oc4j:10.1.3]
     at com.oracle.iiop.server.IIOPServerExtensionProvider.configureOrb (IIOPServerExtensionProvider.java:26) [C:/jdev/j2ee/home/lib/oc4j-internal.jar (from <code-source> in boot.xml in C:\jdev\j2ee\home\oc4j.jar), by oc4j:10.1.3]
     at com.oracle.corba.ee.impl.orb.ORBServerExtensionProviderImpl.preInitApplicationServer (ORBServerExtensionProviderImpl.java:45) [C:/jdev/j2ee/home/lib/oc4j-internal.jar (from <code-source> in boot.xml in C:\jdev\j2ee\home\oc4j.jar), by oc4j:10.1.3]
     at com.evermind.server.ApplicationServer.serverExtensionPreInit (ApplicationServer.java:1031) [C:/jdev/j2ee/home/lib/oc4j-internal.jar (from <code-source> in boot.xml in C:\jdev\j2ee\home\oc4j.jar), by oc4j:10.1.3]
     at com.evermind.server.ApplicationServer.setConfig (ApplicationServer.java:861) [C:/jdev/j2ee/home/lib/oc4j-internal.jar (from <code-source> in boot.xml in C:\jdev\j2ee\home\oc4j.jar), by oc4j:10.1.3]
     at com.evermind.server.ApplicationServerLauncher.run (ApplicationServerLauncher.java:98) [C:/jdev/j2ee/home/lib/oc4j-internal.jar (from <code-source> in boot.xml in C:\jdev\j2ee\home\oc4j.jar), by oc4j:10.1.3]
     at java.lang.Thread.run (Thread.java:595) [jre bootstrap, by jre.bootstrap]

Hi,
The guide you were refering was pointing to 10.1.2 wizards.
For the latest 10.1.3 tutorial, please follow the below tutorial link :
http://www.oracle.com/technology/products/jdev/101/tutorials/WS/WSandAScontrol.htm
Hope this helps,
Sunil..

Error while creting webi report on top of query ,using BO XI3.1

Hi,
I'm getting below error while creating webi report ,tried to applying some patches but no luck
SAP021_sales value report
a database error occured ,the data base error text is error in MDD darasetBW.getcelldata.system error in program CL_RSR_MDX_BXML_FLATENING and form ASSIGN_COMP_02(see long text) (WIS10901)
Looking forward to your sugesstions.
Thanks

hi,
Go through the below SAP Notes on the issue-
SAP OSS Notes 1440912 and 1432162

Strange Error while opening Web UI in a new browser window

Dear Experts
My requirement is to launch one of my custom Web UI screens in a new window upon clicking a button.
I am successfull in lauching it in new window.
How did I do it:
Step 1) Created a custom object type (ZOBJ) for my z component in SPRO->UI Framework Definition->Define UI Object Types.
Step 2) Created a logical link (ZLL) for my Z component in SPRO->UI Framework->Technical Role Definition->Define Navigation Bar Profile.
After that, In the same path, select Define Profile->Define Generic OP mapping->(Here Assign Object type ZOBJ(step 1) and Logical link ZLL(step 2) )
Then created a dynamic URL and passed this URL to the "on_client_click" parameter of my button.
Sample code is below.
I put the below in the .htm of the view where my button was declared.
data: lv_url_string TYPE string.
lv_url_string = 'http://server name:port number/sap/bc/bsp/sap/crm_ui_frame/default.htm?sap-syscmd=nocookie&
crm-object-type=ZOBJ&crm-object-action=B'.
Note: Here ZOBJ is my custom object type that I created for my Z component.
<thtmlb:button id            = "NW"
                     onClientClick = "javascript:window.open('<%= lv_url_string %>');"
                     tooltip       = "New Window"
                     text          = "New Window" />
Problem I am facing:
The above code is successfully opening my custom screen in a new window.
But on the toolbar (where we usually see error messages in Web UI),
I am getting an error message with the below description.
Type= SYSTEM_ERROR, ID= ERROR_SESSION_INIT, description= 16AA9A3937A9BB56E10000000A11447B
I am not able to understand what this error is. The message is appearing only for the first time I am displaying my Z component in a new screen. Interestingly, when I do some action on my screen (expand the assignment block for example), this message is gone. This message doesn't seem to be effecting any functionality, but the users certainly don't want to see an error messsage like this.
I did some research on this and this error looks to be coming from the class CX_WS_MESSAGE_SYSTEM.
This class has an attribute (CX_ROOT) with initial value "16AA9A3937A9BB56E10000000A11447B" (same one I am getting in my error message). I am not sure though because this attribute (CX_ROOT) is present in several other classes also.
I would really appreciate if somebody can throw some light on this issue.
Thanks
Raj

Hi Arun
Thanks for your reply.
I tried the way you suggested. But unfortunately I am still getting the same old error.
Forget to mention something...actually I am seeing this error in the new session (window) only. My original window is not showing any error.
And also just FYI...This is inside the Interaction Center Web UI profile ->Account Identification -> Identify Account->Enter Account ID->Click on Confirm button.
At this point, I am first showing a popup window with text "Do you want to open Partner details in new window".
This popup has 2 buttons 'Yes' and 'No'.. If the user clicks on 'Yes', then I am opening my custom screen (Partner Details) in a new window.
This is the point I am seeing the error (only in the new window).
Type= SYSTEM_ERROR, ID= ERROR_SESSION_INIT, description= 16AA9A3937A9BB56E10000000A11447B
This custom screen contains several (only) assignment blocks (all lazy initially). When the user expands on any assigment block, the error is gone and everything looks good.
Please suggest.
Thanks and Regards
Raj

Error import Adaptive Web Service Modal

Hi, i´m doing an tutorial of import Adaptive Web Service Modal, but when i create the model and write the link: http://www.abysal.com/soap/AbysalEmail.wsdl in the top appear "Error in loading the WSDL file. Check the error log for more details".
I see the log, but appear:
Error Mon Sep 24 13:54:37 CEST 2007 Sep 24, 2007 1:54:37 PM          com.sap.ide.webdynpro.ui.service.ServicesUI          [Thread[main,5,main]] Error: Internal error
   Plugin name: Web Dynpro Model Editor
   Plugin ID : com.sap.ide.webdynpro.modeleditor
   Class      : com.sap.ide.webdynpro.modeleditor.wizards.model.creation.PageRenameWS
   Method     : loadNameSpacesAndModelClasses
   Message    : Cannot load NameSpaces and ModelClasses
Class Path: C:/Archivos de programa/SAP/IDE/IDE70/eclipse/plugins/com.sap.tc.cmi/_cmi_api.jar;C:/Archivos de programa/SAP/IDE/IDE70/eclipse/plugins/com.sap.exception/lib/exception.jar;C:/Archivos de programa/SAP/IDE/IDE70/eclipse/plugins/com.sap.engine.webservices_2.0.0/lib/boot.jar;C:/Archivos de programa/SAP/IDE/IDE70/eclipse/plugins/com.sap.engine.webservices_2.0.0/lib/iq-lib.jar;C:/Archivos de programa/SAP/IDE/IDE70/eclipse/plugins/com.sap.engine.webservices_2.0.0/lib/util.jar;C:/Archivos de programa/SAP/IDE/IDE70/eclipse/plugins/com.sap.engine.webservices_2.0.0/lib/webservices_lib.jar;C:/Archivos de programa/SAP/IDE/IDE70/eclipse/plugins/com.sap.engine.webservices_2.0.0/lib/webservices.jar;C:/Archivos de programa/SAP/IDE/IDE70/eclipse/plugins/com.sap.engine.webservices_2.0.0/lib/webservices_api.jar;C:/Archivos de programa/SAP/IDE/IDE70/eclipse/plugins/com.sap.engine.webservices_2.0.0/lib/tc_sec_wssec_lib.jar;C:/Archivos de programa/SAP/IDE/IDE70/eclipse/plugins/com.sap.dictionary.runtime/lib/SapDictionaryTypesRuntime.jar;C:/Archivos de programa/SAP/IDE/IDE70/eclipse/plugins/com.sap.dictionary.services/lib/SapDictionaryTypeServices.jar;C:/Archivos de programa/SAP/IDE/IDE70/eclipse/plugins/com.tssap.sap.libs.logging/lib/logging.jar;C:/Archivos de programa/SAP/IDE/IDE70/eclipse/plugins/com.tssap.sap.libs.logging/lib/loggingStandard.jar;C:/Archivos de programa/SAP/IDE/IDE70/eclipse/plugins/com.tssap.sap.libs.logging/lib/jARM.jar;C:/Archivos de programa/SAP/IDE/IDE70/eclipse/plugins/com.tssap.sap.libs.xmltoolkit_2.0.0/lib/sapxmltoolkit.jar;C:/Archivos de programa/SAP/IDE/IDE70/eclipse/plugins/com.sap.ext.libs.webservices_2.0.0/lib/activation.jar;C:/Archivos de programa/SAP/IDE/IDE70/eclipse/plugins/com.sap.ext.libs.webservices_2.0.0/lib/jaxm-api.jar;C:/Archivos de programa/SAP/IDE/IDE70/eclipse/plugins/com.sap.ext.libs.webservices_2.0.0/lib/saaj-api.jar;C:/Archivos de programa/SAP/IDE/IDE70/eclipse/plugins/com.sap.ext.libs.webservices_2.0.0/lib/jaxrpc-api.jar;C:/Archivos de programa/SAP/IDE/IDE70/eclipse/plugins/com.sap.ext.libs.webservices_2.0.0/lib/jnet.jar;C:/Archivos de programa/SAP/IDE/IDE70/eclipse/plugins/com.sap.ext.libs.webservices_2.0.0/lib/jsse.jar;C:/Archivos de programa/SAP/IDE/IDE70/eclipse/plugins/com.sap.ext.libs.webservices_2.0.0/lib/mail.jar;C:/Archivos de programa/SAP/IDE/IDE70/eclipse/plugins/com.sap.tc.webdynpro.model.webservice_2.0.0/lib/_webdynpro_model_webservice.jar;
java.home: C:j2sdk1.4.2_09
proxyHost:
proxyPort:
nonProxyHosts:
Temporary Directory: C:DOCUME1vcapillaCONFIG1Temp
WSDL URL: http://www.abysal.com/soap/AbysalEmail.wsdl
   Exception : com.sap.tc.webdynpro.model.webservice.exception.WSModelRuntimeException: Exception on creation of service metadata for WSDL URL http://www.abysal.com/soap/AbysalEmail.wsdl and service factory configuration {DynamicProxy.ClassPath=C:/Archivos de programa/SAP/IDE/IDE70/eclipse/plugins/com.sap.tc.cmi/_cmi_api.jar;C:/Archivos de programa/SAP/IDE/IDE70/eclipse/plugins/com.sap.exception/lib/exception.jar;C:/Archivos de programa/SAP/IDE/IDE70/eclipse/plugins/com.sap.engine.webservices_2.0.0/lib/boot.jar;C:/Archivos de programa/SAP/IDE/IDE70/eclipse/plugins/com.sap.engine.webservices_2.0.0/lib/iq-lib.jar;C:/Archivos de programa/SAP/IDE/IDE70/eclipse/plugins/com.sap.engine.webservices_2.0.0/lib/util.jar;C:/Archivos de programa/SAP/IDE/IDE70/eclipse/plugins/com.sap.engine.webservices_2.0.0/lib/webservices_lib.jar;C:/Archivos de programa/SAP/IDE/IDE70/eclipse/plugins/com.sap.engine.webservices_2.0.0/lib/webservices.jar;C:/Archivos de programa/SAP/IDE/IDE70/eclipse/plugins/com.sap.engine.webservices_2.0.0/lib/webservices_api.jar;C:/Archivos de programa/SAP/IDE/IDE70/eclipse/plugins/com.sap.engine.webservices_2.0.0/lib/tc_sec_wssec_lib.jar;C:/Archivos de programa/SAP/IDE/IDE70/eclipse/plugins/com.sap.dictionary.runtime/lib/SapDictionaryTypesRuntime.jar;C:/Archivos de programa/SAP/IDE/IDE70/eclipse/plugins/com.sap.dictionary.services/lib/SapDictionaryTypeServices.jar;C:/Archivos de programa/SAP/IDE/IDE70/eclipse/plugins/com.tssap.sap.libs.logging/lib/logging.jar;C:/Archivos de programa/SAP/IDE/IDE70/eclipse/plugins/com.tssap.sap.libs.logging/lib/loggingStandard.jar;C:/Archivos de programa/SAP/IDE/IDE70/eclipse/plugins/com.tssap.sap.libs.logging/lib/jARM.jar;C:/Archivos de programa/SAP/IDE/IDE70/eclipse/plugins/com.tssap.sap.libs.xmltoolkit_2.0.0/lib/sapxmltoolkit.jar;C:/Archivos de programa/SAP/IDE/IDE70/eclipse/plugins/com.sap.ext.libs.webservices_2.0.0/lib/activation.jar;C:/Archivos de programa/SAP/IDE/IDE70/eclipse/plugins/com.sap.ext.libs.webservices_2.0.0/lib/jaxm-api.jar;C:/Archivos de programa/SAP/IDE/IDE70/eclipse/plugins/com.sap.ext.libs.webservices_2.0.0/lib/saaj-api.jar;C:/Archivos de programa/SAP/IDE/IDE70/eclipse/plugins/com.sap.ext.libs.webservices_2.0.0/lib/jaxrpc-api.jar;C:/Archivos de programa/SAP/IDE/IDE70/eclipse/plugins/com.sap.ext.libs.webservices_2.0.0/lib/jnet.jar;C:/Archivos de programa/SAP/IDE/IDE70/eclipse/plugins/com.sap.ext.libs.webservices_2.0.0/lib/jsse.jar;C:/Archivos de programa/SAP/IDE/IDE70/eclipse/plugins/com.sap.ext.libs.webservices_2.0.0/lib/mail.jar;C:/Archivos de programa/SAP/IDE/IDE70/eclipse/plugins/com.sap.tc.webdynpro.model.webservice_2.0.0/lib/_webdynpro_model_webservice.jar;, DynamicProxy.INetProxy.Bypass=, DynamicProxy.INetProxy.Port=, DynamicProxy.Javac.path=C:j2sdk1.4.2_09, DynamicProxy.TempDir=C:DOCUME1vcapillaCONFIG1Temp, DynamicProxy.INetProxy.Host=}
com.sap.tc.webdynpro.model.webservice.exception.WSModelRuntimeException: Exception on creation of service metadata for WSDL URL 'http://www.abysal.com/soap/AbysalEmail.wsdl' and service factory configuration '{DynamicProxy.ClassPath=C:/Archivos de programa/SAP/IDE/IDE70/eclipse/plugins/com.sap.tc.cmi/_cmi_api.jar;C:/Archivos de programa/SAP/IDE/IDE70/eclipse/plugins/com.sap.exception/lib/exception.jar;C:/Archivos de programa/SAP/IDE/IDE70/eclipse/plugins/com.sap.engine.webservices_2.0.0/lib/boot.jar;C:/Archivos de programa/SAP/IDE/IDE70/eclipse/plugins/com.sap.engine.webservices_2.0.0/lib/iq-lib.jar;C:/Archivos de programa/SAP/IDE/IDE70/eclipse/plugins/com.sap.engine.webservices_2.0.0/lib/util.jar;C:/Archivos de programa/SAP/IDE/IDE70/eclipse/plugins/com.sap.engine.webservices_2.0.0/lib/webservices_lib.jar;C:/Archivos de programa/SAP/IDE/IDE70/eclipse/plugins/com.sap.engine.webservices_2.0.0/lib/webservices.jar;C:/Archivos de programa/SAP/IDE/IDE70/eclipse/plugins/com.sap.engine.webservices_2.0.0/lib/webservices_api.jar;C:/Archivos de programa/SAP/IDE/IDE70/eclipse/plugins/com.sap.engine.webservices_2.0.0/lib/tc_sec_wssec_lib.jar;C:/Archivos de programa/SAP/IDE/IDE70/eclipse/plugins/com.sap.dictionary.runtime/lib/SapDictionaryTypesRuntime.jar;C:/Archivos de programa/SAP/IDE/IDE70/eclipse/plugins/com.sap.dictionary.services/lib/SapDictionaryTypeServices.jar;C:/Archivos de programa/SAP/IDE/IDE70/eclipse/plugins/com.tssap.sap.libs.logging/lib/logging.jar;C:/Archivos de programa/SAP/IDE/IDE70/eclipse/plugins/com.tssap.sap.libs.logging/lib/loggingStandard.jar;C:/Archivos de programa/SAP/IDE/IDE70/eclipse/plugins/com.tssap.sap.libs.logging/lib/jARM.jar;C:/Archivos de programa/SAP/IDE/IDE70/eclipse/plugins/com.tssap.sap.libs.xmltoolkit_2.0.0/lib/sapxmltoolkit.jar;C:/Archivos de programa/SAP/IDE/IDE70/eclipse/plugins/com.sap.ext.libs.webservices_2.0.0/lib/activation.jar;C:/Archivos de programa/SAP/IDE/IDE70/eclipse/plugins/com.sap.ext.libs.webservices_2.0.0/lib/jaxm-api.jar;C:/Archivos de programa/SAP/IDE/IDE70/eclipse/plugins/com.sap.ext.libs.webservices_2.0.0/lib/saaj-api.jar;C:/Archivos de programa/SAP/IDE/IDE70/eclipse/plugins/com.sap.ext.libs.webservices_2.0.0/lib/jaxrpc-api.jar;C:/Archivos de programa/SAP/IDE/IDE70/eclipse/plugins/com.sap.ext.libs.webservices_2.0.0/lib/jnet.jar;C:/Archivos de programa/SAP/IDE/IDE70/eclipse/plugins/com.sap.ext.libs.webservices_2.0.0/lib/jsse.jar;C:/Archivos de programa/SAP/IDE/IDE70/eclipse/plugins/com.sap.ext.libs.webservices_2.0.0/lib/mail.jar;C:/Archivos de programa/SAP/IDE/IDE70/eclipse/plugins/com.sap.tc.webdynpro.model.webservice_2.0.0/lib/_webdynpro_model_webservice.jar;, DynamicProxy.INetProxy.Bypass=, DynamicProxy.INetProxy.Port=, DynamicProxy.Javac.path=C:j2sdk1.4.2_09, DynamicProxy.TempDir=C:DOCUME1vcapillaCONFIG1Temp, DynamicProxy.INetProxy.Host=}'
     at com.sap.tc.webdynpro.model.webservice.metadata.WSModelInfo.getOrCreateWsrService(WSModelInfo.java:413)
     at com.sap.tc.webdynpro.model.webservice.metadata.WSModelInfo.readOperationsFromWSDL(WSModelInfo.java:371)
     at com.sap.tc.webdynpro.model.webservice.metadata.WSModelInfo.importMetadataInternal(WSModelInfo.java:341)
     at com.sap.tc.webdynpro.model.webservice.metadata.WSModelInfo.importMetadata(WSModelInfo.java:305)
     at com.sap.tc.webdynpro.model.webservice.metadata.WSModelInfo.importMetadata(WSModelInfo.java:315)
     at com.sap.ide.webdynpro.modeleditor.wizards.model.creation.PageRenameWS.loadNameSpacesAndModelClasses(PageRenameWS.java:435)
     at com.sap.ide.webdynpro.modeleditor.wizards.model.creation.ModelDialog.nextPressed(ModelDialog.java:105)
     at org.eclipse.jface.wizard.WizardDialog.buttonPressed(WizardDialog.java:316)
     at org.eclipse.jface.dialogs.Dialog$1.widgetSelected(Dialog.java:423)
     at org.eclipse.swt.widgets.TypedListener.handleEvent(TypedListener.java:89)
     at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:81)
     at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:840)
     at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:2022)
     at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:1729)
     at org.eclipse.jface.window.Window.runEventLoop(Window.java:583)
     at org.eclipse.jface.window.Window.open(Window.java:563)
     at com.sap.ide.webdynpro.modeleditor.ModelEditorCallback.createModel(ModelEditorCallback.java:52)
     at com.sap.ide.webdynpro.service.modeleditor.ModelService.createModelWithUI(ModelService.java:70)
     at com.sap.ide.webdynpro.service.modeleditor.ServiceWithUI.createModel(ServiceWithUI.java:49)
     at com.sap.ide.webdynpro.tsmodel.application.provider.ModelNodeProvider.createUniqueName(ModelNodeProvider.java:55)
     at com.tssap.selena.impl.model.elements.EntityImpl.createChildEntityUin(EntityImpl.java:936)
     at com.tssap.selena.impl.model.elements.EntityImpl.createChildEntity(EntityImpl.java:502)
     at com.sap.ide.webdynpro.tsmodel.application.actions.CreationAction.runInternal(CreationAction.java:76)
     at com.sap.ide.webdynpro.tsmodel.application.actions.CreationAction.access$000(CreationAction.java:24)
     at com.sap.ide.webdynpro.tsmodel.application.actions.CreationAction$1.run(CreationAction.java:51)
     at org.eclipse.core.internal.resources.Workspace.run(Workspace.java:1595)
     at com.sap.ide.webdynpro.tsmodel.application.actions.CreationAction.run(CreationAction.java:57)
     at com.sap.ide.webdynpro.projectbrowser.actions.PBCreateModelAction.run(PBCreateModelAction.java:95)
     at com.tssap.selena.model.extension.action.SelenaActionCollector$GenericElementActionWrapper.run(SelenaActionCollector.java:224)
     at com.tssap.util.ui.menu.MenuFactory$MuSiAction.saveRunAction(MenuFactory.java:1425)
     at com.tssap.util.ui.menu.MenuFactory$MuSiAction.run(MenuFactory.java:1407)
     at com.tssap.util.ui.menu.MenuFactory$DelegateAction.processInternal(MenuFactory.java:616)
     at com.tssap.util.ui.menu.MenuFactory$DelegateAction.access$100(MenuFactory.java:586)
     at com.tssap.util.ui.menu.MenuFactory$DelegateAction$BusyProcessWorker.run(MenuFactory.java:716)
     at org.eclipse.swt.custom.BusyIndicator.showWhile(BusyIndicator.java:69)
     at com.tssap.util.ui.menu.MenuFactory$DelegateAction.process(MenuFactory.java:610)
     at com.tssap.util.ui.menu.internal.MenuListenerFactory$ProcessAdapter.widgetSelected(MenuListenerFactory.java:172)
     at org.eclipse.swt.widgets.TypedListener.handleEvent(TypedListener.java:89)
     at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:81)
     at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:840)
     at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:2022)
     at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:1729)
     at org.eclipse.ui.internal.Workbench.runEventLoop(Workbench.java:1402)
     at org.eclipse.ui.internal.Workbench.run(Workbench.java:1385)
     at com.tssap.util.startup.WBLauncher.run(WBLauncher.java:79)
     at org.eclipse.core.internal.boot.InternalBootLoader.run(InternalBootLoader.java:858)
     at org.eclipse.core.boot.BootLoader.run(BootLoader.java:461)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at com.sap.ide.eclipse.startup.Main.basicRun(Main.java:291)
     at com.sap.ide.eclipse.startup.Main.run(Main.java:789)
     at com.sap.ide.eclipse.startup.Main.main(Main.java:607)
Caused by: com.sap.engine.services.webservices.jaxrpc.exceptions.WebserviceClientException: GenericServiceFactory initialization problem. Could not load web service model. See nested exception for details.
     at com.sap.engine.services.webservices.espbase.client.dynamic.impl.DGenericServiceImpl.generateProxyFiles(DGenericServiceImpl.java:149)
     at com.sap.engine.services.webservices.espbase.client.dynamic.impl.DGenericServiceImpl. java.net.SocketException: Connection reset
     at com.sap.engine.services.webservices.wsdl.WSDLDOMLoader.loadDOMDocument(WSDLDOMLoader.java:1028)
     at com.sap.engine.services.webservices.wsdl.WSDLDOMLoader.loadWSDLDocument(WSDLDOMLoader.java:1115)
     at com.sap.engine.services.webservices.jaxrpc.wsdl2java.ProxyGenerator.generateProxy(ProxyGenerator.java:178)
     ... 57 more
Caused by: java.net.SocketException: Connection reset
     at java.net.SocketInputStream.read(SocketInputStream.java:168)
     at java.io.BufferedInputStream.fill(BufferedInputStream.java:183)
     at java.io.BufferedInputStream.read(BufferedInputStream.java:201)
     at com.sap.engine.services.webservices.jaxm.soap.HTTPSocket.readLine(HTTPSocket.java:806)
     at com.sap.engine.services.webservices.jaxm.soap.HTTPSocket.getInputStream(HTTPSocket.java:341)
     at com.sap.engine.services.webservices.tools.WSDLDownloadResolver.resolveEntity(WSDLDownloadResolver.java:165)
     at com.sap.engine.services.webservices.wsdl.WSDLDOMLoader.loadDOMDocument(WSDLDOMLoader.java:1008)
     ... 59 more
What happend?
Thanks,

Thanks,

How to post a XCelsius in the BPC Web Application Getting Started page

Hi Experts,
I'm new using BPC 7.5 on NetWeaver. When opening the Getting Started tab in the BPC Web Application there is a white page that I would want to fill with content. This content should be a XCelsius Dashboard linked to the Query or InfoCube on which I`m planning. Creating the XCelsius Dashboard is not the problem, but to insert it in the Getting Started panel of the BPC Web application. Has anyone an idea how to do it or how to proceed. Ideas or a little how-to would be perfect.
Thanks very much in advanced,
Àlex

Hi.
Try this...
const string LIST_PAR_NAME = "lu";
string listName = string.Empty;
if (this.Request.Params.AllKeys.Contains(LIST_PAR_NAME))
listName = this.Request.Params[LIST_PAR_NAME];
else
throw new ArgumentException("Par lu is not present.");
SPList listExport = web.Lists[listName];
However take a look at this
http://zsvipullo.blogspot.it/2013/10/get-splist-from-internal-name.html?q=getlist
to check how GetList method is faster than web.Lists[].
Regards,
Bubu
http://zsvipullo.blogspot.it
Please mark my answer if it helped you, I would greatly appreciate it.

Error while creating webi on BEx query

Hello,
I will appreciate your help on this matter.
I created a BICS connection and published it in the repository successfully. I then logged on to BI launch pad and tried to create webi report on top of BEx query but getting a following error.
I am not sure what that error is all about , may be something to do with Java. I would appreciate if you advise your help on this.
Regards.
==============================================================================
HERE IS AN ERROR MESSAGE:
java.util.concurrent.ExecutionException: com.google.protobuf.UninitializedMessageException: Message missing required fields: bytesValue
     at java.util.concurrent.FutureTask$Sync.innerGet(Unknown Source)
     at java.util.concurrent.FutureTask.get(Unknown Source)
     at javax.swing.SwingWorker.get(Unknown Source)
     at com.sap.webi.ui.dialog.bex.OpenBexPanel.endFetchNode(OpenBexPanel.java:801)
     at com.sap.webi.ui.dialog.bex.OpenBexPanel.propertyChange(OpenBexPanel.java:1009)
     at java.beans.PropertyChangeSupport.firePropertyChange(Unknown Source)
     at javax.swing.SwingWorker$SwingWorkerPropertyChangeSupport.firePropertyChange(Unknown Source)
     at javax.swing.SwingWorker$SwingWorkerPropertyChangeSupport$1.run(Unknown Source)
     at javax.swing.SwingWorker$DoSubmitAccumulativeRunnable.run(Unknown Source)
     at sun.swing.AccumulativeRunnable.run(Unknown Source)
     at javax.swing.SwingWorker$DoSubmitAccumulativeRunnable.actionPerformed(Unknown Source)
     at javax.swing.Timer.fireActionPerformed(Unknown Source)
     at javax.swing.Timer$DoPostEvent.run(Unknown Source)
     at java.awt.event.InvocationEvent.dispatch(Unknown Source)
     at java.awt.EventQueue.dispatchEvent(Unknown Source)
     at java.awt.EventDispatchThread.pumpOneEventForFilters(Unknown Source)
     at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source)
     at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source)
     at java.awt.Dialog$1.run(Unknown Source)
     at java.awt.Dialog$3.run(Unknown Source)
     at java.security.AccessController.doPrivileged(Native Method)
     at java.awt.Dialog.show(Unknown Source)
     at com.jidesoft.dialog.StandardDialog.show(Unknown Source)
     at java.awt.Component.show(Unknown Source)
     at java.awt.Component.setVisible(Unknown Source)
     at java.awt.Window.setVisible(Unknown Source)
     at java.awt.Dialog.setVisible(Unknown Source)
     at com.sap.webi.toolkit.ui.dialog.GenericDialog.setVisible(GenericDialog.java:116)
     at com.sap.webi.ui.dialog.bex.OpenBexDialog.setVisible(OpenBexDialog.java:94)
     at com.sap.webi.ui.data.BexQueryDataSourceProvider.createDataSourceInfo(BexQueryDataSourceProvider.java:85)
     at com.sap.webi.ui.context.managers.DataManager.createDataSourceInfo(DataManager.java:277)
     at com.sap.webi.ui.tasks.workflows.CreateDataSourceInfoUITask.doneProcess(CreateDataSourceInfoUITask.java:127)
     at com.sap.webi.toolkit.ui.tasks.WebITask.done(WebITask.java:123)
     at javax.swing.SwingWorker$5.run(Unknown Source)
     at javax.swing.SwingWorker$DoSubmitAccumulativeRunnable.run(Unknown Source)
     at sun.swing.AccumulativeRunnable.run(Unknown Source)
     at javax.swing.SwingWorker$DoSubmitAccumulativeRunnable.actionPerformed(Unknown Source)
     at javax.swing.Timer.fireActionPerformed(Unknown Source)
     at javax.swing.Timer$DoPostEvent.run(Unknown Source)
     at java.awt.event.InvocationEvent.dispatch(Unknown Source)
     at java.awt.EventQueue.dispatchEvent(Unknown Source)
     at java.awt.EventDispatchThread.pumpOneEventForFilters(Unknown Source)
     at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.run(Unknown Source)
Caused by: com.google.protobuf.UninitializedMessageException: Message missing required fields: bytesValue
     at com.google.protobuf.AbstractMessage$Builder.newUninitializedMessageException(AbstractMessage.java:531)
     at com.sap.sl.olap.sapbw.protobuf.generated.SapbwService$msgBytesValue$Builder.build(SapbwService.java:567)
     at com.sap.sl.sdk.olap.sapbw.service.SapBwBrowsingServiceImpl.processDoIt(SapBwBrowsingServiceImpl.java:299)
     at com.sap.sl.sdk.olap.sapbw.service.SapBwBrowsingServiceImpl.processInvocation(SapBwBrowsingServiceImpl.java:246)
     at com.sap.sl.sdk.olap.sapbw.service.SapBwBrowsingServiceImpl.processOpenSession(SapBwBrowsingServiceImpl.java:229)
     at com.sap.sl.sdk.olap.sapbw.service.SapBwBrowsingServiceImpl.openSession(SapBwBrowsingServiceImpl.java:59)
     at com.sap.webi.ui.dialog.bex.ExpandRepositoryItemWorker.getBrowsingSession(ExpandRepositoryItemWorker.java:63)
     at com.sap.webi.ui.dialog.bex.ExpandRepositoryItemWorker.doInBackground(ExpandRepositoryItemWorker.java:40)
     at com.sap.webi.ui.dialog.bex.ExpandRepositoryItemWorker.doInBackground(ExpandRepositoryItemWorker.java:15)
     at javax.swing.SwingWorker$1.call(Unknown Source)
     at java.util.concurrent.FutureTask$Sync.innerRun(Unknown Source)
     at java.util.concurrent.FutureTask.run(Unknown Source)
     at javax.swing.SwingWorker.run(Unknown Source)
     at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(Unknown Source)
     at java.util.concurrent.ThreadPoolExecutor$Worker.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)

Henry,
Thanks for yor detailed answer, I am looking into it and working with an admin people to resolve this issue. will post here if able to solve it.
In the meanwhile I am getting another similar kind of error "WHILE CREATING WEBI ON TOP OF UNIVERSE" and wondering if both these error are of similar nature, Will appreciate your help and advice on this.
Here is an error and its details:
========================
[[error.RepositoryException] 0] <RepositoryImpl.getInternalResourceID() : can't find InfoObject of cuid M06604sAAW5bAJsAeAAAVVgAAgqWJIcAAAA>,<com.businessobjects.mds.repository.exceptions.RepositoryException: [[error.RepositoryException] 0] <RepositoryImpl.getInternalResourceID(): can't find InfoObject of cuid M06604sAAW5bAJsAeAAAVVgAAgqWJIcAAAA>> (WIS 00000)
DETAIL:
==========
com.businessobjects.sdk.core.server.CommunicationException$UnexpectedServerException: [[error.RepositoryException] 0] <RepositoryImpl.getInternalResourceID() : can't find InfoObject of cuid M06604sAAW5bAJsAeAAAVVgAAgqWJIcAAAA>,<com.businessobjects.mds.repository.exceptions.RepositoryException: [[error.RepositoryException] 0] <RepositoryImpl.getInternalResourceID(): can't find InfoObject of cuid M06604sAAW5bAJsAeAAAVVgAAgqWJIcAAAA>>
     at com.businessobjects.sdk.core.exception.ExceptionBuilder.make(ExceptionBuilder.java:144)
     at com.businessobjects.sdk.core.exception.ExceptionBuilder.make(ExceptionBuilder.java:101)
     at com.businessobjects.sdk.core.server.common.CommonRequestHandler.afterProcessing(CommonRequestHandler.java:127)
     at com.businessobjects.sdk.core.server.internal.AbstractServer.processIt(AbstractServer.java:178)
     at com.businessobjects.sdk.core.server.internal.AbstractServer.process(AbstractServer.java:133)
     at com.businessobjects.sdk.core.server.internal.InstanceServer.process(InstanceServer.java:94)
     at com.sap.sl.sdk.services.util.ServerRequestProcessor.processServerRequest(ServerRequestProcessor.java:49)
     at com.sap.sl.sdk.datasource.strategy.BuiltInDataSourceStrategyImpl.addDataProvider(BuiltInDataSourceStrategyImpl.java:100)
     at com.sap.sl.sdk.workspace.service.WorkspaceServiceImpl.addDataProvider(WorkspaceServiceImpl.java:77)
     at com.sap.sl.sdk.workspace.service.WorkspaceServiceImpl.addDataProvider(WorkspaceServiceImpl.java:60)
     at com.sap.webi.ui.context.managers.DataManager.addDataProviderFromDataSourceInfo(DataManager.java:395)
     at com.sap.webi.ui.tasks.workflows.AddDataProviderUITask.doIt(AddDataProviderUITask.java:106)
     at com.sap.webi.ui.tasks.workflows.AddDataProviderUITask.doIt(AddDataProviderUITask.java:19)
     at com.sap.webi.toolkit.ui.tasks.WebITask.doInBackground(WebITask.java:113)
     at javax.swing.SwingWorker$1.call(Unknown Source)
     at java.util.concurrent.FutureTask$Sync.innerRun(Unknown Source)
     at java.util.concurrent.FutureTask.run(Unknown Source)
     at javax.swing.SwingWorker.run(Unknown Source)
     at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(Unknown Source)
     at java.util.concurrent.ThreadPoolExecutor$Worker.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
Caused by: com.businessobjects.sdk.core.server.ServerException: [[error.RepositoryException] 0] <RepositoryImpl.getInternalResourceID() : can't find InfoObject of cuid M06604sAAW5bAJsAeAAAVVgAAgqWJIcAAAA>,<com.businessobjects.mds.repository.exceptions.RepositoryException: [[error.RepositoryException] 0] <RepositoryImpl.getInternalResourceID(): can't find InfoObject of cuid M06604sAAW5bAJsAeAAAVVgAAgqWJIcAAAA>>
     at com.businessobjects.sdk.core.server.common.CommonRequestHandler.newServerException(CommonRequestHandler.java:260)
     at com.businessobjects.sdk.core.server.common.CommonRequestHandler.createAllServerExceptions(CommonRequestHandler.java:238)
     at com.businessobjects.sdk.core.server.common.CommonRequestHandler.afterProcessing(CommonRequestHandler.java:121)
     ... 18 more

How to customize the error messages in web analysis reports

Does anyone know how to customize the error messages that web analysis shows ,
I want to customize the below error message with a custom error message
"Document does not exist or no authorization to open document.Error occurred while loading document"
Does anyone know how to do this ?

Rajesh,
you may want to check these links
How to the Change the Application Stopped Message
How to Change the Dispatcher Running, No Server Connected Message
http://help.sap.com/saphelp_nw70/helpdata/en/65/18fc3f9ec4e669e10000000a155106/frameset.htm
Thanks
Bala Duvvuri

Error when inserting Web Dynpro script in Adobe form

Hi
In my WD component in one of the view I have an ADOBE form (Online scenario) and a button to save data into backend. In the ADOBE form everything is working properly, however the problem is when I click on the button to save, Its not getting into my action code. Even I am not getting any error other than the wait symbol.
In the form I have taken ZCI layout but when i'm inserting Webdynpro Script its showing an error 'Error when inserting Web Dynpro script'.
Please let me know why this error is getting.
Thanks
Ram

Hi Ram,
I hope you help me,
I have the same error, when I insert a web Dynrp Script, what version of SAPGUI do you use?
Thanks

Error while creating web dynpro project from DTR

Hello,
I am getting following error while creating Web Dynpro project from DTR,
org.eclipse.jdt.core.JavaModelException: File /<track name><DC><package>/.classpath is read-only.
Still project gets created but evenif I check out view , it does not allow me to edit it.
Also I have checked in and activated some changes but active copy in DTR is not reflecting those changes.
I tried Add subtree option in DTR perspective for folders in this project. Is it result of that?
Please help me in this regard.
Thank You
Beena

Hi Beena,
.classpath file should not checked in to DTR(uncheck the Read only properties). It is local file it contains class path for local system.
Generally in webdynpro project only src folder should be checked in DTR.
Regards
Suresh

Error autentification BPC web

Similar Messages

Maybe you are looking for