Error backing up- previously worked...

Hi,
My time machine is failing back up so i installed the widget and its giving error:
event store uuids dont match for the volume: Macintosh HD
node requires deep traversal:/
reason:kFSEDBEventFlagMustScanSubDirs|kFSEDBEventFlagReasonEventDBUntrustable
any help to resolve this please?
thanks.

padraig galvin wrote:
Hi,
My time machine is failing back up so i installed the widget and its giving error:
event store uuids dont match for the volume: Macintosh HD
node requires deep traversal:/
reason:kFSEDBEventFlagMustScanSubDirs|kFSEDBEventFlagReasonEventDBUntrustable
That's not an error. Those messages are normal under some circumstances, and mean that Time Machine must compare everything on your system to the backups, to figure out what's changed and needs to be backed-up. See #A6 in [Time Machine - Troubleshooting|http://web.me.com/pondini/Time_Machine/Troubleshooting.html] (or use the link in *User Tips* at the top of this forum), for details.
You've posted in the Snow Leopard forum, but your signature says you're running Leopard. If you're on 10.6.4 or later, you should see "Scanning xxxx items" on the +Time Machine Preferences+ window.
The "deep traversal" will take a while, depending on how much is on your system. But it shouldn't take hours, even on the largest systems. If it does, cancel the backup (if it won't cancel after a while, see #D6 in Troubleshooting).
Then verify your internal HD, and Repair your backups, per #A5 there.

Similar Messages

  • Error 200617 on every usage of NI PXI-5610 that was previously working

    Hello,
    I have been trying to use the NI PXI-5610 RF upconverter (associated with a NI PXI-5441) with VIs that were previously working, including the NI GPS toolkit and RFSG example VIs. However, with the same setups as were working previously and the examples every time I now receive the following error
    niRFSG
    Commit.vi<ERR>The upconverter reported the following
    error:
    DAQmx Error
    -200617 occurred:
    Measurements: Output generation was aborted by the reverse
    power protection circuitry of the device. Either the output signal exceeded the
    output power limit, or power was being driven back into the output of the device
    by an external source. Correct the problem, then generate the signal
    again.
    I have tried restarting, allowing 30 minutes warmup time before trying to use the RFSG and ensuring that the chassis fans are set to high with no change in the result. 
    I have also tried doing a self test on the RFSG unit in MAX which fails with error 200020.

    Ok, well we can take the first steps via this forum post. If we need to RMA the PXI-board we can follow up on the created service request.
    First I want to start troubleshooting the Self Test error.
    I have attached a application which goes through all of the tests separately so we can determine where this error is coming from. Please run all of the test provide by this application.
    Thank you in advance.
    With kind regards,
    Casper
    Attachments:
    Self Test Internal.zip ‏32 KB

  • How to revert back previous working files in InDesign CS6?

    I have suddenly replace wrong working files, how to revert back previous working files in InDesign CS 6?
    OS Mac version: 10.10.3
    InDesign CS6 version

    This feature does not exist in InDesign. You're best hope is that you have a backup of the previous file. Moving forward, you might want to try a free product called Radish that allows you to save versions and revert back to previous versions when needed. Here's a blog post I wrote about the product Story Versioning in InCopy | InCopySecrets.

  • I previously uploaded images onto my desktop to work on in Lightroom 5.2. I worked on a few of the images days ago and just now getting back to them. My problem is I can only access the images I previously worked on and all the rest it says images not ava

    I previously uploaded images onto my desktop to work on in Lightroom 5.2. I worked on a few of the images days ago and just now getting back to them. My problem is I can only access the images I previously worked on and all the rest it says images not available but all the images are still right on my desktop.

    ... and all the rest it says images not available
    Normally this happens because you moved, renamed or deleted these photos (or the folders that contain them) outside of Lightroom. This is how to fix the problem: Adobe Lightroom - Find moved or missing files and folders

  • Workflow status web part gives error when going back to previous stage (using GO TO) in Project Server 2013 workflow

    Hi,
    Workflow status web part gives error when going back to previous stage (using GO TO) transition activity  in Project Server 2013 workflow.
    Please guide how to create a workflow which restarts from a desired stage.

    Thanks for your prompt reply....
    It gives following error
    Workflow Status
    This Web Part was unable to load.
    Information that may be useful in solving this problem was written to the Unified Logging Service (ULS) log on the Project Web App with the following ID: e95a9c9c-1f68-90d7-0a3e-5951df70fec6
    For more information, contact your Project Web App administrator.
    what do you mean to restart the Project Server 2013 with different project name, please elaborate....

  • Hi, I just bought the new i phone 5. I have plugged it into my computer a few times to run the back up and it has previously worked fine. When i try to connect it into the computer it is not recognised and will not do anything at all??

    few times to run the back up and it has previously worked fine. When i try to connect it into the computer it is not recognised and will not do anything at all??

    By calling iPod tech support while you are under warranty.  You also have 14 days to return it w/no questions asked for a replacement or your $$$ back. 

  • Why does my safari stops working every time I try to swipe back to previous page

    My safari stops working every time I try to swipe (multitouch) back to previous page? There's no spinning beach ball or anything, but the page just stops responding altogether. If I close the non-responding page fast enough the other pages remain fine, but if I just leave the non-reponding page as it is the entire app become non-reponsive and need to be forced quite. I'm running OS X 10.9.1 on a late 2012 MacBook Pro Ret. Anyone having the same prob?

    Please read this whole message before doing anything.
    This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
    Step 1
    The purpose of this step is to determine whether the problem is localized to your user account.
    Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
    While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
    Test while logged in as Guest. Same problem?
    After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
    *Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
    Step 2
    The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you boot, and again when you log in.
    Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to boot and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, reboot as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

  • HT201250 My time machine back has been working perfectly well until yesterday when it failed. The error message I get is Files can't be copied onto the backup disk because it appears to be read-only. How do I fix it?

    My time machine back has been working perfectly well until yesterday when it failed. The error message I get is Files can’t be copied onto the backup disk because it appears to be read-only. How do I fix it?

    Hello,
    http://pondini.org/TM/C6.html

  • I have an iphone 4S and stupidly let it update to iOs 7 and now I cant get wifi or bluetooth. Anyone know how I can get back the previous update when my iphone was working perfectly?

    I have an iphone 4S and stupidly let it update to iOs 7 and now I cant get wifi or bluetooth. Anyone know how I can get back the previous update when my iphone was working perfectly?

    Your WiFi/Bluetooth chip has failed.  Bring the phone (and $199 if outside the warranty period) to Apple for replaceement.

  • Document.links[0].onclick getting is null error in firefox 9 working fine below version 9

    in js I have written following line of code to navigate back , home pages. this code works fine upto version 8 but not working in version 9 and above
    <br />
    <pre><nowiki><a href="#" onClick="goBack();" >Back to Previous</a>
    function goBack(){
    //Disabled the action of the link after first click to avoid repeated click events-Sreejesh
    //once the action is compleated It will be activated by the function 'doCommonLoad' in commonfunctions.js
    objLinks = document.links;
    alert(objLinks.length);
    for(i=0;i<objLinks.length;i++){
    alert(objLinks[i]);
    if(objLinks[i].onclick.toString().indexOf("goBack")>0){
    objLinks[i].style.color="grey";
    objLinks[i].removeAttribute('onClick');
    if(taskList == true){
    if (secondFrame == "tasklistframe") {
    hideFrame("inboxframe");
    minimizeFrame("tasklistframe");
    } else {
    hideFrame("tasklistframe");
    minimizeFrame("inboxframe");
    // if(twoFrames = false)
    // maximize('maincontentframe');
    if(document.getElementById("statusbar").style.display == 'none')
    document.getElementById("statusbar").style.display = 'block';
    document.getElementById("mainMin").style.visibility = "visible"
    parent.document.getElementById("hiddenframe").src="hidden.jsp?action=MENU_GO_BACK";
    }</nowiki></pre>
    it gives error in js as -- objLinks[i].onclick is null when I click on the link

    The following forum is a better place to ask about web development issues.
    http://forums.mozillazine.org/viewforum.php?f=25
    Before doing that though, you should try this with Firefox 16.0.1.[[Update Firefox to the latest version]]

  • BIBeans on WinNT - killer of previously working OLAP samples?

    I installed JDeveloper 9i RC and BiBeans RC. I applied all the latest OLAP patches and started working on BiBeans tutorial. I installed the demo database bibdemo schema and started creating OLAP connection required by Designer wizard. As other people already posted, the connection won't work until upcoming OLAP Patch for WinNT/2000.
    So I tried to go back to my previously working OLAP samples (generated from OLN OLAP API Fundamentals class) and noticed that they didn't work any more.
    Here is the output of the sample program:
    **** Obtained CORBA stub for /etc/OLAPServer/OLAPServer1 ****
    **** OLAP Services connection start ****
    **** OLAP Services connection made ****
    *** Metadata provider created ***
    Exception in thread main
    oracle.express.mdm.MetadataNotFoundException
         java.lang.String oracle.express.mdm.MetadataPropertyBag.getStringPropertyValue(java.lang.String)
         oracle.express.mdm.MdmObject oracle.express.mdm.MdmObjectFactory.createMdmObject(java.lang.String, oracle.express.mdm.MetadataPropertyBag, oracle.express.mdm.MdmMetadataProvider, oracle.olapi.data.source.DataProvider)
         oracle.express.mdm.MdmObject oracle.express.mdm.MdmMetadataProvider.getMetadataObject(java.lang.String)
         oracle.express.mdm.MdmSchema oracle.express.mdm.MdmMetadataProvider.getRootSchema()
         void oracle.practices.OLAPPractices.execute(java.lang.String[])
         void oracle.practices.OLAPPractices.main(java.lang.String[])
    Process exited with exit code 1.
    The line that generates the exception is:
    MdmSchema root = mdp.getRootSchema();
    I noticed that installing BIBDEMO sample schema removed the old SH measures and cubes. I tried changing the user/pwd from SH to BIBDEMO and got the same error.
    What's causing the problem. Can I easily undo the BIBDEMO changes and make the OLAP API samples work again. Or am I stuck waiting for the upcoming OLAP Patch?
    /Stan

    Hi Stan
    Can you tell us exactly what you did?
    What versions of the Beans and Oracle9i OLAP did you have first?
    What version of the OLAP patch did you install?
    What OS are you using? I initially installed Oracle 9i Database for MS Windows NT/2000 from CD-ROM (version 9.0.1). I have also installed JDeveloper 3.2.3 from an accompanying CD-ROM. I don't remember if BI Beans existed in that release, probably not.
    Then I downloaded JDeveloper 9i RC and BIBeans AddIn for JDeveloper. I installed the following patches:
    - Oracle9i Patch Set Version 9.0.1.2.0,
    - Oracle OLAP Release 1 Patch Set Version 9.0.1.1.1,
    - Oracle OLAP Best Practices for Cube Aggregation and Query Operations Release 1 (9.0.1) for Windows and UNIX, Part Number A92122-01,
    - XADEMO.BAT for Oracle OLAP.
    I'm using Windows NT 4 with SP 6a.
    I have also re-installed the SH_CAT schema as you suggested in the other note, but that didn't make the problem go away. I'm still getting MetadataNotFoundException when calling mdp.getRootSchema().
    /Stan

  • Firefox (latest and greatest) has been giving me synaptics scroll wheel errors. It has worked fine up until 3 days ago. I have the latest driver for the touch-pad, from synaptics, for my toshiba laptop L505D-S5986. Operating system is Windows 7 (32-Bit).

    Firefox (latest and greatest) has been giving me synaptics scroll wheel errors. It has worked fine up until 3 days ago. I have the latest driver for the touch-pad, from synaptics, for my toshiba laptop L505D-S5986. Operating system is Windows 7 (32-Bit). Have tried it on other browsers, and works as it should. The last add-on i installed for Firefox was "Fox Filter" so my kids couldn't accidentally stumble onto sites of immoral tastes. I can't see why that would have any effect, but it was the last update/add-on i installed to the browser, but even then,.......it was working fine for a week and a half afterwards until now. Please help.
    == This happened ==
    A few times a week
    == A week and a half after i installed Fox Filter. ==
    == User Agent ==
    Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US) AppleWebKit/532.5 (KHTML, like Gecko) Chrome/4.1.249.1064 Safari/532.5

    Hello Steve.
    You may be having a problem with some extension or plugin that is hindering your Firefox's normal behavior. Have you tried disabling all add-ons (just to check), to see if Firefox goes back to normal?
    If you detect a faulty add-on, you should contact its author for support. You can also search for alternatives. Site filters are relatively common in the add-ons gallery: [http://addons.mozilla.org addons.mozilla.org].

  • How do I revert back to previous (before 11) itunes. Someone nicked my Album Cover flow, without asking

    how do I revert back to previous (before 11) itunes.
    Someone nicked my Album Cover flow, without asking. I have snow leopard. I was happy. Just before Christmas as if I havent got enough to do Thank You. I've given Apple loads of money this year--presents and all, the least they could do is tell me, they're going to take stuff off of My computer that I enjoy,/ find very useful/ and worked hard to update all my album covers and have a gallery of my own artwork for my mixes--it was beautiful. When I went to add some more, the facility had been taken away from me. Was so dissapointed. They send me emails all the time to buy the latest must have products. I even did a questionair to help them. They really care for their customers--right. So why couldnt they warn me about this update, its only polite.
    If I bought a warm coat some years ago, then the manufatures came round without my knowledge and cut off the left arm, and later told me, their reserch says that people dont use the left arm so much so they have to get rid of it. 1. I think that would be illegal. 2. its impolite not to ask if they could do it. 3. why not give me an options to keep it, seeing as i bought it. 4. its ludicrous.
    I trusted Apple-but then -they took my YouTube off my ipad. I cant update to newer software as I will lose some expensive programms (Im not made of money). I also have 2 oldish defunct but fully working laser printers (if they were compatible with new software).
    Im not a techky-I just use the stuff, I do art and music and Cover Flow was equipement I used.
    I want to get rid of itunes 11, anyhelp out there

    click the blue download button...
    http://support.apple.com/kb/DL1576

  • Is there a way of reverting back to previous firefox version

    I use firefox extensively for development. I use firebug and dojo. It seems that the new version (Firefox 4) is far slower than the previous version and sometimes hangs completely. I believe this may be caused by Firebug doing a lot of work but it never used to happen. Also firebug doesn't quite seem to work as well with dojo script. Previously if you did a dojo.require to drag in a js script file then you could automatically see it through firebug. Now have to put files I want to debug with script tags. Is there a way of reverting back to previous firefox version?

    No need to re-install plugins or extensions.
    You can install them both but there are a few steps to take.
    When you install the second version of Firefox use the custom installation option and choose a different location to install Firefox.
    In order to use both versions, you need to create a new profile for the second version of Firefox (Firefox stores user data in the profile). Using the same profile with different versions can cause problems. Once you create a new profile you can copy certain data such as bookmarks and passwords between them. You can also use Firefox Sync to keep the profile synchronized. Finally, you will need to set up shortcuts to launch the correct profile for each version.
    The following links show how to do this:
    * http://kb.mozillazine.org/Creating_a_new_Firefox_profile_on_Windows
    * http://kb.mozillazine.org/Shortcut_to_a_specific_profile
    * http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
    * https://addons.mozilla.org/firefox/addon/firefox-sync (only needed for Firefox 3.6, it is built into Firefox 4)
    An alternative way of testing Firefox 4 is to install the portable version on your hard drive. It will use its own profile folder and not interfere with the other version of Firefox. You can get the portable version from http://portableapps.com/apps/internet/firefox_portable

  • Error: OUI.exe Stopped Working 11g R2 32-bit Client on Win 7 64-bit

    I am receiving an error "oui.exe stopped working" when running setup.exe to install Oracle 11g R2 (win32_11gR2_client.zip for Win 32-bit) client on Windows 7 Enterprise 64-bit. I never even get as far as the Oracle installation dialog box. I am trying to install 11g R2 32-bit because it is my understanding the 64-bit version of Oracle client is not compatible with Toad for Oracle.
    I have read numerous posts on the subject and have tried just about everything I can think of to get around the error. When I run the setup.exe -debug I can see that teh files are unzipped and the installer seems to fail when it hit the section where it tries executing java.exe. Once the dialog box appears with the error message, I am not able to get back to the command window to extract the debug results. I can only see it partially in the background behind the dialog box. When I hit cancel to close the error dialog, the debug window also closes, so no way to get the details of the debug results
    I am logged into Win 7 as a member of the Adminstrators group and have verified that the Windows User Access Control (UAC) is turned off. I get the erorr message whether I run as Administrator or not. I have unzipped all the files and folders under the \client directory from the zip file to a folder c:\temp\. So the setup.exe and all folders below it are in the c:\temp directory. I did this because one post suggested an issue with long path names or path names with spaces when executing setup.exe.
    Seems like it should not be this difficult. I never had issues in the past installing Oracle client on Windows XP Pro. This is my first attempt at installing under Win 7.
    Any help or direction would be much appreciated.
    Edited by: user10421280 on Nov 21, 2011 1:27 PM

    orafad and PavanG,
    First let me thank you both for your multiple attempts to help me. I finally figured out what was causing the issue with the Oracle Installer, oui.exe not running properly. Last night I was looking around into the Windows Event Viewer and found an Error entry for oui.exe that pointed to a program directory and .dll in the \\program files\appsense\ directory path. It seems that in addition to the McAfee virus scan, host intrusion, unwanted programs, group policy manager, etc., there is another application installed on the machine that governs what programs can and cannot run. I don't know much about it other than when the program was temporarily suspended, the setup.exe and oui.exe install kicked off fine without the "oui.exe stopped working" error message. It proceeded happily to the Oracle Client installation dialog. All along our IT desktop support was trying to help me with the install and they repeatedly disabled the McAfee programs to no avail, but not the other utilities. It was almost like even they were unaware of this other application running in the background since they never suggested disabling it.
    Either way, I'm happy to say that I am now able to successfully launch the Oracle Client installer without issue. I've also learned a little about getting the Oracle 11g Instant client to work with Toad while I worked through the issue with the installer. I could almost get by completely with just using the Instant Client if I didn't have to use SQL*Loader (sqlldr.exe) and tnsping.exe. Any suggestions for getting these two functions to work with the Instant Client would be appreciated. I tried copying the binaries and the message files into the appropriate instant client directories, but windows kept complaining about missing .dll's when I tried executing the commands.
    If there is no workaround for getting these functions to work with the Instant Client, and I have to do an Oracle Client install, at least now I can. Do you know if I would need to do the full "Administrator" install to get these functions, or can I do just the "Run Time" install to get sqlldr and tnsping?
    Thanks again for your help

Maybe you are looking for