Error_bad_netpath

Hello colleagues,
SAP server doesn't started. It was happened after one of windows restarts. And this error arises: "Unable to change to directory
stg-sam\saploc\DMI\JC00\work. {Error 53 ERROR_BAD_NETPATH: the network path was not found}[ntservstart.cpp 1024]"
Are there some ideas maybe?
Thanks in advance.

check that saploc share is in place... \usr\sap needs to be share as saploc and sapmnt
Regards
Juan

Similar Messages

Problem: ERROR_BAD_NETPATH

Hello All.
System:
- Tarantella 3.4.2 + Firewall Traversal
- Red Hat 9.0
I try to use "Client Drive Mapping", but I found some problems with this feature.
I read this Howto to install and configure: http://www.tarantella.com/support/documentation/sgd/ee/3.42/help/en-us/base/gettingstarted/cdm.html
I go to my Windows box and I try to login with Windows user, but it can�t Mapping my network drives
So, the error above appear when I run this command "ttatdm.exe" in my Win2000 Server.
Anybody help ?
Regards.
Alexandre Andrade
OS&T

The netpath includes the Servername. Do you have a name resolution on your W2k box ? This was one of my problems in the past.
ich fixed that, by including IP/name in the host file of the W2k box.
Happy New year!
TAB

SAP Service Not Starting in BI 7.0

Hi All,
Today morning my BI 7.0 server restarted twice automatically, then I started the server in last known good configuration after that when I tried to start the server from SAP MMC it didn't started and when i checked the sap service in services.msc it gives error <b>"Some services stop automatically when they have no work to do"</b>.and didn't get started.
I found a thread similiar to this problem and following that I used sapstartsrv.exe in usr\sap\SID\......\exe directory. This didn't worked for me and by using this Both the services SAPEP2_00 and SAPEP2_01 got removed from services.msc.
Now I have installed these service again and now I am at same status as in morning,
In Event log
For SAPEP2_00 and SAPEP2_01 the following error are avaliable:
--Initialization failed. Service not started. [ntservmain.cpp 1269]
--Unable to change to Directory
gms40\saploc\EP2\DVEBMGS00\work. (Error 53 ERROR_BAD_NETPATH: The network path was not found. ) [ntservstart.cpp 966]
If any one have gone through such situation please help me out from this, Its has became too critical for me now.
Thanks in advance....
Regards
Vinay Paul

Hi
Service are started now but when I am trying to start the server, it is showing strdbs.cmd, sapcpe.exe in red status "could not be started".
Regards
Vinay Paul
Message was edited by:
Vinay Paul

SAP Service not getting started

Hi Experts,
After rebooting the WEB AS java server i am not able to restart the SAP services i.e. SAP<SID>_00, SAP<SID>_01 etc.
Gettign the following error
1. Initialization failed. Service not started. [ntservmain.cpp 1497]
2. Unable to change to Directory
<HOST Name>\saploc\<SID>\JC00\work. (Error 53 ERROR_BAD_NETPATH: The network path was not found. ) [ntservstart.cpp 1024]
Could you please let me know regarding this.
Regards,
Sarbjeet Singh

Hi.
If you do a simple search through SCN you will find that similar questions are already answered, for instance - Error_bad_netpath.
Please, follow the [rules of engagement|https://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement].
Best regards,
Aliaksandr Zhukau

Problems with drive mapping

We have changed the server of linux that supports tarantella. We have
installed tarantella on redhat 8 and worked perfectly. I have installed
the tarantella enhancement module for windows and activated in the array
manager the option " let users access client drives " but on having
entered the session of windows not does not appear the local hard disks.
There is something more than I have to do in order that me it works? Thank
you for yours help

Carmelo wrote:
The problem is
18:32:27 : 00007219: javi : Add device failed with ERROR_BAD_NETPATH
You may want to enable WINS per
http://www.tarantella.com/documentation/sgd/ee/3.42/help/en-us/base/standard/am_array.html
-> Client Drive Mapping: Use WINS for better performance
Regards,
Javi wrote:
Carmelo,
I have verified that is running cdm, besides I have verified also that
from the windows servers solves perfectly the name of the redhat server.
I write you the mistakes that me appear in the log of the ttadm, for if
you know which is the mistake. Thank you very much
18:32:21 : 00000453: javi : URI file Drive A for Administrator
18:32:21 : 00000453: javi : Share = \\medea\Drive A for Administrator
18:32:21 : 00000469: javi : Packet >> Packet nLength 5
18:32:21 : 00000469: javi : General options flags 8
18:32:21 : 00000469: javi : Alternative name = V:
18:32:21 : 00000469: javi : Packet >> Packet nLength 3
18:32:21 : 00000469: javi : DEVICE_CLASS_FILESYSTEM
18:32:21 : 00000469: javi : device flags 2
18:32:21 : 00000469: javi : Device info : Dos name = , search = 1,
searchUp = 0
18:32:27 : 00007219: javi : Trying alternate device V:
18:32:27 : 00007219: javi : Failed to add device to V:
18:32:27 : 00007219: javi : Add device failed with ERROR_BAD_NETPATH
18:32:27 : 00007219: javi : failed to add device
18:32:27 : 00007219: javi : WTSVirtualChannelWrite returned 18 bytes
18:32:27 : 00007219: javi : 0x0042a160 01 10 00 00 00 10 00 00 00 01 01
00 00 00 00 00 ................
18:32:27 : 00007235: javi : 0x0042a170 00 00 ..
18:32:27 : 00007235: javi : ServerChannel::isDataAvailable
WTSVirtualChannelRead returned 176 bytes
18:32:27 : 00007235: javi : 0x0042a7a4 00 b0 00 00 00 11 00 00 00 01 00
43 19 00 44 72 ...........C..Dr
18:32:27 : 00007235: javi : 0x0042a7b4 69 76 65 20 43 20 66 6f 72 20 41
64 6d 69 6e 69 ive C for Admini
18:32:27 : 00007250: javi : 0x0042a7c4 73 74 72 61 74 6f 72 09 00 00 00
00 00 00 00 01 strator.........
18:32:27 : 00007266: javi : 0x0042a7d4 5c 00 00 00 25 00 73 6d 62 3a 2f
2f 6d 65 64 65 \...%.smb://mede
18:32:27 : 00007266: javi : 0x0042a7e4 61 2f 44 72 69 76 65 20 43 20 66
6f 72 20 41 64 a/Drive C for Ad
18:32:27 : 00007281: javi : 0x0042a7f4 6d 69 6e 69 73 74 72 61 74 6f 72
00 00 00 00 01 ministrator.....
18:32:27 : 00007281: javi : 0x0042a804 2c 00 00 00 14 00 59 57 52 74 61
57 35 70 63 33 ,.....YWRtaW5pc3
18:32:27 : 00007297: javi : 0x0042a814 51 35 4d 44 41 33 4f 44 45 3d 14
00 55 6b 64 42 Q5MDA3ODE=..UkdB
18:32:27 : 00007297: javi : 0x0042a824 50 54 4a 57 55 44 59 77 4d 43 73
79 57 53 45 3d PTJWUDYwMCsyWSE=
18:32:27 : 00007313: javi : 0x0042a834 14 00 00 00 05 00 00 00 08 00 01
00 56 03 00 00 ............V...
18:32:27 : 00007313: javi : 0x0042a844 00 02 00 00 00 00 00 00 00 00 00
00 00 00 00 00
18:32:27 : 00007328: javi : TTDMServer::process messagecode 0 deviceid 17
Carmelo wrote:
Javier,
What version of Tarantella are you running? The reason I ask, is that
since v3.30 you also need to run
$ tarantella start cdm
Also see
http://www.tarantella.com/documentation/sgd/ee/3.42/help/en-us/base/standard/cdm.html
>>
>>
Regards,
Javier wrote:
We have changed the server of linux that supports tarantella. We have
installed tarantella on redhat 8 and worked perfectly. I have installed
the tarantella enhancement module for windows and activated in the array
manager the option " let users access client drives " but on having
entered the session of windows not does not appear the local hard disks.
There is something more than I have to do in order that me it works? Thank
you for yours help
If you are using WINS the problem appears to be one of WINS name mapping.
Check if the Tarantella server is not on the same subnet as the Windows
Terminal Server that you
are using to run your Windows applications.
You need to add the Tarantella server to each of the Windows Terminal
Servers as a WINS server.
After that you may need to restart the Windows terminal Server.
Hope it helps.
Regards,
Gonzalo

CDM and printing from Client side

Hi all,
Here I have installed RH9 and Tarantella 3.40. and I have 2 network card.
First one is eth0 is for LAN and second is for static IP i.e eth1. my
application server is win2k and I can access application easily. Now my
problem is I want use client drive mapping here to save users work and
Client printing for print the reports. Can anyone help how to do that ?
Thanks Regards,
Rachana.

Rachana,
Can you describe your network architecture again? How many NICs do you have
on the Tarantella server? What's the name(s) and IP address(es)? How many
NICs do you have on your W2K server? Name(s) and IP address(es)?
"Rachana" <[email protected]> wrote in message
news:[email protected]...
Hi Esc 27,
Thanks again,
I have made changes as per your instructions.
Problem not yet solve. Now new message I seen in ttatdm "13:41:01
:00000016:Administrator :Failed to create server channel"
Prining from tarantella is priority for me. I am seen printer has been
create session wise in Win2k server, even as per TTA document I created
LPR port. But here I given eth1 IP address (i.e. my static IP address ) in
providing lpd field. and name of printer is tta_printer.
Is it correct to give static IP address for LPR port ?.
Still I am in same problem kindly please help me.
Regards
Rachana.
Escape 27 wrote:
Try enabling the WINS server in Array Manager and add it to your W2K
server.
"Rachana" <[email protected]> wrote in message
news:[email protected]...
Hi Escape 27,
Thanks for your reply.
First I tried in array manager to change DNS Name, second I have
installed
enhancement module on w2k server. But still I facing same CDM problem.
In
w2k server \"C:\Program Files \Tarantella \Enhancement
Module\ttatdm.exe\"
I seen this error \"C:\Add device failed with ERROR_BAD_NETPATH\".
F.Y.I. I am not created Domain here because I have Static IP and I want
to
access thought simple Internet.
help is appreciate.
Thanks,
Rachana Salavi
Escape 27 wrote:
I assume that when you say eth1 is \"static IP\", you meant this oneconnects
to the internet.
What you need to do are:
- change the external DNS name in Tarantella to use the hostname of
your
eth1 interface
- install the enhancement module on your W2K server
- enable Client Drive Mapping in array manager
All users will access the Tarantella server using the hostname of eth1
Hope this helps.
\"Rachana Salavi \" <[email protected]> wrote in message
news:[email protected]...
Hi all,
Here I have installed RH9 and Tarantella 3.40. and I have 2 network
card.
First one is eth0 is for LAN and second is for static IP i.e eth1.
my
application server is win2k and I can access application easily. Now
my
problem is I want use client drive mapping here to save users work
and
Client printing for print the reports. Can anyone help how to do
that ?
Thanks Regards,
Rachana.

R/3 not startup

Dear sir
actually i am installing a dialog instace ,and i have share a usr
(folder) as a SAPMNT for the network ,that time problem arise ,
how resolve this problem
SAP-R/3-Startup Program
Starting at 2007/10/31 9:58:11
Startup Profile: "D:\usr\sap\BWD\SYS\profile\START_DVEBMGS32_bwdsvr"
Starting Programs
(1608) CreateProcess(
bwdsvr\sapmnt\BWD\SYS\exe\run\strdbs.cmd BWD) failed(53). ERROR_BAD_NETPATH: The network path was not found.
(1608) CreateProcess(
bwdsvr\sapmnt\BWD\SYS\exe\run\msg_server.exe pf=
bwdsvr\sapmnt\BWD\SYS\profile\BWD_DVEBMGS32_bwdsvr) failed(53). ERROR_BAD_NETPATH: The network path was not found.
(1608) CreateProcess(
bwdsvr\sapmnt\BWD\SYS\exe\run\disp+work.exe pf=
bwdsvr\sapmnt\BWD\SYS\profile\BWD_DVEBMGS32_bwdsvr) failed(53). ERROR_BAD_NETPATH: The network path was not found.
(4464) CreateProcess: D:\usr\sap\BWD\DVEBMGS32\igs\bin\igswd.exe -dir=D:\usr\sap\BWD\DVEBMGS32\igs -mode=all -sysname=BWD -sysno=32
thanks
with best regards
venkat

Dear sunil
when i installing a dialog instanse that time by mistake i am sharing a sap folder as a name of the sapmnt in bwdserver ,that time problem aries
when i statup a mmc nothing is started red colour mark ,how cant resolve this proble , i have no idea
please guide
thanks
with regards
venkat

SAP Discovery errr

I have received our new SAP Discovery system NW2004s. I am following the Quickstart guide. I am having an issue with starting the instance. There are 3 processes that should start sapcpe.exe, enserver.exe, msg_server.exe. The enserver.exe starts fine, the msg_server.exe starts and then stops, and sapcpe.exe get an error. We changed the system name from initial install to our statndards. Here is the sapstart.log:
SAP-R/3-Startup Program
Starting at 2006/12/12 10:10:33
Startup Profile: "D:\usr\sap\ERP\SYS\profile\START_DVEBMGS10_iwdfvm2160"
Starting Programs
(388) CreateProcess(
iwdfvm2160\sapmnt\ERP\SYS\exe\uc\NTI386\sapcpe.EXE) failed(53). ERROR_BAD_NETPATH: The network path was not found.
(388) CreateProcess(
iwdfvm2160\sapmnt\ERP\SYS\exe\uc\NTI386\strdbs.cmd) failed(53). ERROR_BAD_NETPATH: The network path was not found.
(5260) CreateProcess: D:\usr\sap\ERP\DVEBMGS10\exe\msg_server.EXE pf=
iwdfvm2160\sapmnt\ERP\SYS\profile\ERP_DVEBMGS10_iwdfvm2160
(4260) CreateProcess: D:\usr\sap\ERP\DVEBMGS10\exe\disp+work.EXE pf=
iwdfvm2160\sapmnt\ERP\SYS\profile\ERP_DVEBMGS10_iwdfvm2160
(4636) CreateProcess: D:\usr\sap\ERP\DVEBMGS10\exe\igswd.EXE -mode=profile pf=
iwdfvm2160\sapmnt\ERP\SYS\profile\ERP_DVEBMGS10_iwdfvm2160

If you lok at the "CreateProcess" statement, it de-references the hostname
iwdfvm2160 This is the original hostname of the Discovery server, however you stated that you changed the server's hostname.
Also the profile files have the original hostname appended as part of the filename. You will have to do some manual editing of the content of the profile files.
Furthermore, the ERP instance has several RFC connections defined using the original hostname (iwdfvm2160) that will need to adjust. Finally, on the Java stacks of the additional components (suc as XI) you will need to modify the hostname. You may also want to check the SLD for any references to "iwdfvm2160"
Technically it is possible to change the hostname of your Discovery server, but you are creating a lot of work for yourself. You may wish to work with an experienced Basis person to get all this done properly.

Application Server cannot start after restart

Dear all,
I have a database cluster with SAP CI running on 2 servers(on SAN), plus 4 applications.
Today we have restarted all the servers, and found that only 1 server with database server and application server (w/CI) can start. All other applications servers cannot start, and in SAP Management Console, it does not show the SAP Instance.
Another problem is that the database cluster cannot move to another server, with error:
"initerrlog: Could not open error log file 'M:\Microsoft SQL Server\MSSQL.1\MSSQL\LOG\ERRORLOG'. Operating system error = 3(The system cannot find the path specified.)."
Can anyone provide any assistant? Many thanks!
Regards,
Daniel

Hi Yaroslav,
In Application Server, Not started.
Log(1):
The description for Event ID ( 0 ) in Source ( SAP???_?? ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: SAP Service SAP???_?? has been stopped successfully..
Log(2):
The description for Event ID ( 0 ) in Source ( SAP???_?? ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: Initialization failed. Service not started. [ntservmain.cpp 1269].
Log(3):
The description for Event ID ( 0 ) in Source ( SAP???_?? ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: Cannot open Profile
sapgrp\sapmnt\PRD\SYS\profile\START_D21_sapapp1. (Error 53 ERROR_BAD_NETPATH: The network path was not found. ) [ntservstart.cpp 902].
For SQL Server(The one which Cluster cannot move group to):
Log(1):
The description for Event ID ( 35712 ) in Source ( SAPPRD_01 ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: , , , , , , , , , , r, e, c, v, 1, 0, 0, 5, 4, , , , , , , , , , , , , , , , , , , , N, i, I, R, e, a, d, r, e, c, v, , , , n, i, x, x, i, ., c, p, 4, 2, 4, 5, , , , , , , , , , , , , , , , , , , , , , , , , , , recv10054 NiIReadrecv nixxi.cp4245.
Log(2):
The description for Event ID ( 0 ) in Source ( SAP???_?? ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: SAP Service SAP???_?? has been stopped successfully..
Log(3):
The description for Event ID ( 0 ) in Source ( SAP???_?? ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: Initialization failed. Service not started. [ntservmain.cpp 1269].
Log(4):
The description for Event ID ( 0 ) in Source ( SAP???_?? ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: Cannot open Profile
sapgrp\sapmnt\PRD\SYS\profile\START_D20_sapdb2. (Error 53 ERROR_BAD_NETPATH: The network path was not found. ) [ntservstart.cpp 902].
Regards,
Daniel

SAP Management Console is blank

Dear All ,
I am facing problem in my des sever suddely in SAP Management Console is blank and there is no tree struce of sid
and oracle is up and SAPOSCOL services is running but   SAPDES_00 services Stop and not running
Regards,
Kumar

HI Ashok
I have check the event log. In this error .
Event Type:     Error
Event Source:     SAPDES_00
Event Category:     None
Event ID:     0
Date:          8/31/2009
Time:          3:18:51 PM
User:          N/A
Computer:     HODT084
Description:
Unable to change to Directory
HODT084\saploc\DES\DVEBMGS00\work. (Error 53 ERROR_BAD_NETPATH: The network path was not found. ) [ntservstart.cpp 883]
I have check there is no folder name \saploc
Regard,
Kumar

Error_bad_netpath

Similar Messages

Maybe you are looking for