"error: bad port 0xffff len 0x8"

Dear sir,
I need your help as soon as possoible. Actyually I have a system with Win98 and Win 2000 installed on them. I want to install Solaris also so that I can try it and see its performance. The problem appears here. when i start to boot from the CD-ROM an during Solaris is Scanning Devices this message appears:
          "error: bad port 0xffff len 0x8
          The root filesystem is not mounted and the configuration
          assistant has exite prematureky. ...."
Can you tell me what should i do!
waiting you reply as soon as possible!
yours,
Al-Shayeb
[email protected]

Hi,
Check your system configuration with Solaris x86 hardware compatibility list.
Refer this URL:
http://soldc.sun.com/support
Revert back.
Thanks,
Senthilkumar
SUN - DTS

Similar Messages

Crystal Reports Server 2008 - CMC Login Error - Bad Port Number in CMS Name

This post is similar to previous post: Error: Bad port number in CMS name fe80:0:0:0:152f:77a:382d:6d8e:6400 null - which remains unanswered.
In this case, I have installed a full licensed version of CRS 2008 on Windows Server 2008. I'm using Tomcat 5.5 and IIS 7.0.
The error we get when trying to log into the server using SERVERNAME:6400 (the default), is:
u2022Error: Bad port number in CMS name fe80:0:0:0:6509:bde9:93bf:f9de:6400 null
We neglected to install IIS prior to installing CRS, so when we realized our error, we installed IIS and then uninstalled/reinstalled CRS 2008.
Prior to reinstalling CRS, the CMC allowed us to login with no problem, which leads me to suspect that CRS may not have uninstalled cleanly.
Can anyone help me to understand what causes this error, and what steps can be taken to resolve it?

Hi,
Try to check the port number 6400 is assigned properly to CMS. Please make sure that its not assigned to any other Products.
Thanks,
SK.

B2B-50079 Transport Error : Bad Message

Hi All,
I have an SFTP outbound TPA which is used to transfer a PGP file from our internal system to TP vendor.
So the transfer is as follows B2B(Internal System) -> WebServer(acts as proxy while connecting to third party server)-->ThirdParty.
The use proxy is checked in the Channels of the Trading Partner.
The transfer fails while transfering the file to the TP with the below error.
"B2B-50079 Transport Error : Bad Message" I have manually sftpd from web server to the TP server and it is working absolutely fine.
Also i have verified that the certificate and host,port username details to connect to the TP are correct.
Please let us know on what the problem area could be.
There is no problem with file naming convention since the file is getting picked up by the listening channel and also we have checked the preserve file name option in the TP channel.
Any help on this is much appreciated.
Thanks,
Naveen Kumar T.

Thanks Anuj for the response.
We already have the required patch, also its working fine with other Trading partners which uses SFTP. We are facing this issue with only one Trading partner and the same is working fine with 10g B2B but not with 11g.
Please let us know if there is any other configurations which we can check.
Thanks,
Sirisha

*** ERROR = BAD REQUEST - Reason: DpRqCheck failed (line 5195): [dpxxdisp.

Hello All,
In our development system, we are able to perform all the transactions normally(SAP level) and there is no performance issues..
We have checked from OS level in work directory file dev_disp..
We are getting below error.
Can you please suggest us on this..............
=========================================================
ERROR => DpRqCheck: T72 in stat TM_SLOT_FREE [dpxxdisp.c 5805]
***LOG Q0G=> DpRqBadHandle, bad_req ( DIA) [dpxxdisp.c 4621]
ERROR => BAD REQUEST - Reason: DpRqCheck failed (line 5195): [dpxxdisp.c 4623]
-IN-- sender_id DISPATCHER tid 72 wp_ca_blk -1 wp_id -1
-IN-- action SEND_TO_WP uid 8012 appc_ca_blk -1 type DIA
-IN-- new_stat NO_CHANGE mode 0 len -1 rq_id 53650
-IN-- req_info MS_ERROR
ERROR => DpRqCheck: T73 in stat TM_SLOT_FREE [dpxxdisp.c 5805]
***LOG Q0G=> DpRqBadHandle, bad_req ( DIA) [dpxxdisp.c 4621]
ERROR => BAD REQUEST - Reason: DpRqCheck failed (line 5195): [dpxxdisp.c 4623]
-IN-- sender_id DISPATCHER tid 73 wp_ca_blk -1 wp_id -1
-IN-- action SEND_TO_WP uid 8013 appc_ca_blk -1 type DIA
-IN-- new_stat NO_CHANGE mode 0 len -1 rq_id 53651
-IN-- req_info MS_ERROR
ERROR => DpRqCheck: T74 in stat TM_SLOT_FREE [dpxxdisp.c 5805]
***LOG Q0G=> DpRqBadHandle, bad_req ( DIA) [dpxxdisp.c 4621]
ERROR => BAD REQUEST - Reason: DpRqCheck failed (line 5195): [dpxxdisp.c 4623]
-IN-- sender_id DISPATCHER tid 74 wp_ca_blk -1 wp_id -1
-IN-- action SEND_TO_WP uid 8014 appc_ca_blk -1 type DIA
-IN-- new_stat NO_CHANGE mode 0 len -1 rq_id 53652
-IN-- req_info MS_ERROR
ERROR => DpRqCheck: T77 in stat TM_SLOT_FREE [dpxxdisp.c 5805]
***LOG Q0G=> DpRqBadHandle, bad_req ( DIA) [dpxxdisp.c 4621]
ERROR => BAD REQUEST - Reason: DpRqCheck failed (line 5195): [dpxxdisp.c 4623]
-IN-- sender_id DISPATCHER tid 77 wp_ca_blk -1 wp_id -1
-IN-- action SEND_TO_WP uid 8019 appc_ca_blk -1 type DIA
-IN-- new_stat NO_CHANGE mode 0 len -1 rq_id 53653
-IN-- req_info MS_ERROR
Wed Apr 7 08:55:32 2010
***LOG Q0K=> DpMsAttach, mscon ( ussapdir00) [dpxxdisp.c 10127]
Wed Apr 7 08:55:33 2010
use SAPLOCALHOST=<ussapdir00> as internal hostname
NiPAccept: accept failed (socket=7;errno=72)
***LOG Q0I=> NiPRead: recv (73: Connection reset by peer) [niuxi.c 928]
SoftCancel request for T45 U8133 M0 received from REMOTE_TERMINAL
Network error of client T46, NiBufReceive (-6: NIECONN_BROKEN), dp_tm_status=3
Client address of T46 is 10.228.250.65(10.228.250.65)
***LOG Q04=> DpRTmPrep, NiBufReceive (8135 MKK27890 46 BREWL07D4359) [dpxxdisp.c 9830]
RM-T46, U8135, 620 MKK27890, BREWL07D43598, 08:43:19, M0, W4, , 2/0
Network error of client T45, NiBufReceive (-6: NIECONN_BROKEN), dp_tm_status=3
Client address of T45 is 10.228.250.65(10.228.250.65)
***LOG Q04=> DpRTmPrep, NiBufReceive (8133 RR606033 45 BREWL07D4359) [dpxxdisp.c 9830]
RM-T45, U8133, 600 RR606033, BREWL07D43598, 08:38:22, M0, W0, SPRO, 2/3
Release check o.K.
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1025]
MBUF state ACTIVE
Wed Apr 7 08:55:39 2010
ERROR => DpRqCheck: T45 in stat TM_SLOT_FREE [dpxxdisp.c 5805]
***LOG Q0G=> DpRqBadHandle, bad_req ( DIA) [dpxxdisp.c 4621]
ERROR => BAD REQUEST - Reason: DpRqCheck failed (line 5195): [dpxxdisp.c 4623]
-IN-- sender_id DISPATCHER tid 45 wp_ca_blk -1 wp_id -1
-IN-- action SEND_TO_WP uid 8133 appc_ca_blk -1 type DIA
-IN-- new_stat NO_CHANGE mode 0 len -1 rq_id 53678
-IN-- req_info LOGOFF CANCELMODE
Wed Apr 7 08:55:44 2010
ERROR => DpRqCheck: T46 in stat TM_SLOT_FREE [dpxxdisp.c 5805]
***LOG Q0G=> DpRqBadHandle, bad_req ( DIA) [dpxxdisp.c 4621]
ERROR => BAD REQUEST - Reason: DpRqCheck failed (line 5195): [dpxxdisp.c 4623]
-IN-- sender_id DISPATCHER tid 46 wp_ca_blk -1 wp_id -1
-IN-- action SEND_TO_WP uid 8135 appc_ca_blk -1 type DIA
-IN-- new_stat NO_CHANGE mode 0 len -1 rq_id 53676
-IN-- req_info LOGOFF CANCELMODE
======================================================================
Thanks in advance..
Best Regards,
Kiran

Hi Kiran,
It's not a problem or error, it's just a message and hence can be ignored. However you can check out SAP note 1111154 once, it will fix the issue probably if it's happening due to HTTP problem. Else you can very well ignore it.
Regards
Sourabh Majumdar

ASR9K PPPoE ERROR - bad session data

In a month the second case all are disconnected Rrroyesessii and new aren't connected not to reboot a router yet.
Messages
RP/0/RSP0/CPU0:Feb 12 20:17:00.396 : pppoe_ma[378]: Bundle-Ether100.10: I dst ffff.ffff.ffff src bcee.7bed.90a0: len 46 0x11090000000c01010000010300040001000000000000000000000000000000000000000000000000000000000000
RP/0/RSP0/CPU0:Feb 12 20:17:00.396 : pppoe_ma[378]: [PADI-Recv]: Bundle-Ether100.10 peer-mac bcee.7bed.90a0
RP/0/RSP0/CPU0:Feb 12 20:17:00.396 : pppoe_ma[378]: [PADI-Recv]: vlan-id-outer 600
RP/0/RSP0/CPU0:Feb 12 20:17:00.396 : pppoe_ma[378]: [PADI-Recv]: Service-name:
RP/0/RSP0/CPU0:Feb 12 20:17:00.396 : pppoe_ma[378]: [PADI-Recv]: Host-uniq: 00010000
RP/0/RSP0/CPU0:Feb 12 20:17:00.396 : pppoe_ma[378]: Bundle-Ether100.10: O dst bcee.7bed.90a0 src e4c7.227c.ea0b: len 31 0x11070000001901010000010300040001000001020009415352394b2d424e47
RP/0/RSP0/CPU0:Feb 12 20:17:00.396 : pppoe_ma[378]: [PADO-Sent]: Bundle-Ether100.10 peer-mac bcee.7bed.90a0
RP/0/RSP0/CPU0:Feb 12 20:17:00.396 : pppoe_ma[378]: [PADO-Sent]: vlan-id-outer 600
RP/0/RSP0/CPU0:Feb 12 20:17:00.396 : pppoe_ma[378]: Bundle-Ether100.10: I dst ffff.ffff.ffff src 0860.6e24.0390: len 46 0x11090000000c01010000010300040001000000000000000000000000000000000000000000000000000000000000
RP/0/RSP0/CPU0:Feb 12 20:17:00.396 : pppoe_ma[378]: [PADI-Recv]: Bundle-Ether100.10 peer-mac 0860.6e24.0390
RP/0/RSP0/CPU0:Feb 12 20:17:00.396 : pppoe_ma[378]: [PADI-Recv]: vlan-id-outer 88
RP/0/RSP0/CPU0:Feb 12 20:17:00.396 : pppoe_ma[378]: [PADI-Recv]: Service-name:
RP/0/RSP0/CPU0:Feb 12 20:17:00.410 : pppoe_ma[378]: Bundle-Ether100.10: O dst 5404.a68e.2160 src e4c7.227c.ea0b: len 31 0x11070000001901010000010300040001000001020009415352394b2d424e47
RP/0/RSP0/CPU0:Feb 12 20:17:00.410 : pppoe_ma[378]: [PADO-Sent]: Bundle-Ether100.10 peer-mac 5404.a68e.2160
RP/0/RSP0/CPU0:Feb 12 20:17:00.410 : pppoe_ma[378]: [PADO-Sent]: vlan-id-outer 210
RP/0/RSP0/CPU0:Feb 12 20:17:00.410 : pppoe_ma[378]: Bundle-Ether100.10: I dst ffff.ffff.ffff src 5404.a6e6.81d4: len 46 0x11090000000c01010000010300040001000000000000000000000000000000000000000000000000000000000000
RP/0/RSP0/CPU0:Feb 12 20:17:00.410 : pppoe_ma[378]: [PADI-Recv]: Bundle-Ether100.10 peer-mac 5404.a6e6.81d4
RP/0/RSP0/CPU0:Feb 12 20:17:00.410 : pppoe_ma[378]: [PADI-Recv]: vlan-id-outer 32
RP/0/RSP0/CPU0:Feb 12 20:17:00.410 : pppoe_ma[378]: [PADI-Recv]: Service-name:
RP/0/RSP0/CPU0:Feb 12 20:17:00.410 : pppoe_ma[378]: [PADI-Recv]: Host-uniq: 00010000
RP/0/RSP0/CPU0:Feb 12 20:17:00.410 : pppoe_ma[378]: Bundle-Ether100.10: O dst 5404.a6e6.81d4 src e4c7.227c.ea0b: len 31 0x11070000001901010000010300040001000001020009415352394b2d424e47
RP/0/RSP0/CPU0:Feb 12 20:17:00.410 : pppoe_ma[378]: [PADO-Sent]: Bundle-Ether100.10 peer-mac 5404.a6e6.81d4
RP/0/RSP0/CPU0:Feb 12 20:17:00.518 : pppoe_ma[378]: Bundle-Ether100.10: I dst ffff.ffff.ffff src 60a4.4c8c.8ddc: len 46 0x11090000000c01010000010300040001000000000000000000000000000000000000000000000000000000000000
RP/0/RSP0/CPU0:Feb 12 20:17:00.518 : pppoe_ma[378]: [PADI-Recv]: Bundle-Ether100.10 peer-mac 60a4.4c8c.8ddc
RP/0/RSP0/CPU0:Feb 12 20:17:00.518 : pppoe_ma[378]: [PADI-Recv]: vlan-id-outer 60
RP/0/RSP0/CPU0:Feb 12 20:17:00.518 : pppoe_ma[378]: [PADI-Recv]: Service-name:
RP/0/RSP0/CPU0:Feb 12 20:17:00.518 : pppoe_ma[378]: [PADI-Recv]: Host-uniq: 00010000
RP/0/RSP0/CPU0:Feb 12 20:17:00.518 : pppoe_ma[378]: [PADI-Recv]: ERROR - bad session data
RP/0/RSP0/CPU0:Feb 12 20:17:00.518 : pppoe_ma[378]: Bundle-Ether100.10: O dst 60a4.4c8c.8ddc src e4c7.227c.ea0b: len 31 0x11070000001901010000010300040001000001020009415352394b2d424e47
ASR9001
Cisco IOS XR Software, Version 5.1.1[Default]
Copyright (c) 2014 by Cisco Systems, Inc.
ROM: System Bootstrap, Version 2.04(20140227:092320) [ASR9K ROMMON]
How to fight against it? before such it wasn't noticed

hi vladimir,
I checked the source code when this error is set. this is seen when a session stage packet is received that has no valid idb (aka subscriber interface) for the session ID that was found in the packet together with the vlan tags.
Now this is a PADI, so it is not a session packet to start with.
Next I see that the function that sets this error is only called for on data packets when the opcode is 0x00 in your case the opcode is 0x09 which is a PADI.
what I am thinking that is happening here is that the punt software has provided incorrect pointers to the start of the packet due to a sw bug.
I would like to request if you can evaluate xr513 for this as I see some fixes in 512/513 relating to the punt handling sw that might be of benefit here.
regards
xander

LIBGWT_CAT:1313: ERROR: Bad message

I am trying to connect a clarifyCRM 11.5 based system from BEA WebLogic 7.0 Sp2
through WebLogic Tuxedo Connector.
I am getting a "Bad Message" error on the clarify side. PLease let me know what
might be the error.
Details are as follows:
================
1. BEA Weblogic is installed on Win2k and Clarify is installed on Solaris8.
2. On Solaris8 machine, the ULog shows the following error:
==============================================
150353.jupiter!GWTDOMAIN.8761.1.0: LIBGWT_CAT:1129: INFO: Connection established
with domain (domainid=<BEA001
)150354.jupiter!GWTDOMAIN.8761.1.0: LIBGWT_CAT:1313: ERROR: Bad message from BEA001.
Closing file descriptor
150354.jupiter!GWTDOMAIN.8761.1.0: LIBGWT_CAT:1130: INFO: Disconnected from domain
(domainid=<BEA001>)
150354.jupiter!GWTDOMAIN.8761.1.0: LIBGWT_CAT:1354: INFO: Retrying domain (domainid=<BEA001>)
every 60 seconds
==========================================================
3.The configuration for WTC in config.xml :
===========================================================
<WTCServer Name="MyWTCServer" Targets="myserver">
<WTCImport LocalAccessPoint="BEA001"
Name="WTCImport-1056499621875"
RemoteAccessPointList="CLAR115" RemoteName="CB_EXESUB" ResourceName="MyImportedService"/>
<WTCLocalTuxDom AccessPoint="BEA001" AccessPointId="BEA001"
ConnectionPolicy="ON_DEMAND" MaxRetries="5000000"
NWAddr="//172.24.3.208:7001" Name="WTCLocalTuxDom-1055806963906"/>
<WTCRemoteTuxDom AccessPoint="CLAR115" AccessPointId="CLAR115"
ConnectionPolicy="ON_DEMAND" LocalAccessPoint="BEA001"
NWAddr="//10.3.0.14:53401" Name="WTCRemoteTuxDom-1056499341890"/>
</WTCServer>
==================================================================
4. DMConfig on on clarify machine:
==================================================
# DMCONFIG FILE
*DM_RESOURCES
 VERSION="U22"
*DM_LOCAL
CLAR115 GWGRP=GWDOM
 TYPE="TDOMAIN"
 DOMAINID="CLAR115"
 AUDITLOG="/u02/program/tuxedo/clr_115/AUDITLOG"
 BLOCKTIME=10
 CONNECTION_POLICY="ON_DEMAND"
 DMTLOGDEV="/u02/program/tuxedo/clr_115/DMTLOG"
 DMTLOGNAME="DMTLOG_TDOM"
 MAXDATALEN=56
 MAXRACCESSPOINT=89
 MAXTRAN=100
 BLOB_SHM_SIZE=1000000
*DM_REMOTE
BEA001 TYPE=TDOMAIN
 DOMAINID="BEA001"
*DM_TDOMAIN
BEA001 NWADDR="//172.24.3.208:7001"
# NWDEVICE="/dev/tcp"
CLAR115 NWADDR="//jupiter:53401"
# NWDEVICE="/dev/tcp"
*DM_LOCAL_SERVICES
CB_EXESUB LDOM="CLAR115"
*DM_REMOTE_SERVICES
===============================================================

Bhaskar,
The ULOG message about "Retrying" does not go with a configuration
of "ON_DEMAND". The best guess is that BEA001 is not really communicating
with whom you think. Two things to look at:
1)Check that "jupiter"=="10.3.0.14"
2) Do a dmunloadcf on the CLAR115 domain and see if the domain that is
booted
is what you expected from your configuration.
Bob Finan
Bhaskar wrote:
Bob,
No success by changing port numbers.
However after some more experimentation I am getting the following:
I installed tuxedo on another Windows 2000 m/c. (say TUX001). If I call the Clarify
domain as CLAR115 and BEA domain as BEA001 then
a) I am able to communicate between CLAR115 and TUX001
b) I am able to communicate between TUX001 and BEA001 by using WTC in BEA001
c) But, I am still not able to communicate between BEA001 and CLAR115. I still
obtain a BAD Message error on the CLAR115 side
Quite puzzled with this.
Regards
Bhaskar
"Bhaskar" <[email protected]> wrote:
Thanks Bob,
I would surely try with using another port.
Currently,I am using a different port for the WLS admin server. Secondly,
in case
I was using a port that was already being used by some other server,
one of the
two servers would not have come up.
Is there any method to read the ULogs for the Local tuxedo domain on
WLS end.
thanks and regards
Bhaskar
Bob Finan <[email protected]> wrote:
Bhaskar,
You are probably using the //172.24.3.208:7001 port for other purposes
and this is
causing the problem(e.g. 7001 is the default WLS admin port).Try
changing the
NWAddr port number for the WTCLocalTuxDom..
Bob Finan
Bhaskar wrote:
I am trying to connect a clarifyCRM 11.5 based system from BEA WebLogic
7.0 Sp2
through WebLogic Tuxedo Connector.
I am getting a "Bad Message" error on the clarify side. PLease let
me
know what
might be the error.
Details are as follows:
================
1. BEA Weblogic is installed on Win2k and Clarify is installed on Solaris8.
2. On Solaris8 machine, the ULog shows the following error:
==============================================
150353.jupiter!GWTDOMAIN.8761.1.0: LIBGWT_CAT:1129: INFO: Connection
established
with domain (domainid=<BEA001
150354.jupiter!GWTDOMAIN.8761.1.0: LIBGWT_CAT:1313: ERROR: Bad message
from BEA001.
Closing file descriptor
150354.jupiter!GWTDOMAIN.8761.1.0: LIBGWT_CAT:1130: INFO: Disconnected
from domain
(domainid=<BEA001>)
150354.jupiter!GWTDOMAIN.8761.1.0: LIBGWT_CAT:1354: INFO: Retrying
domain
(domainid=<BEA001>)
every 60 seconds
==========================================================
3.The configuration for WTC in config.xml :
===========================================================
<WTCServer Name="MyWTCServer" Targets="myserver">
<WTCImport LocalAccessPoint="BEA001"
Name="WTCImport-1056499621875"
RemoteAccessPointList="CLAR115" RemoteName="CB_EXESUB"
ResourceName="MyImportedService"/>
<WTCLocalTuxDom AccessPoint="BEA001" AccessPointId="BEA001"
ConnectionPolicy="ON_DEMAND" MaxRetries="5000000"
NWAddr="//172.24.3.208:7001" Name="WTCLocalTuxDom-1055806963906"/>
<WTCRemoteTuxDom AccessPoint="CLAR115" AccessPointId="CLAR115"
ConnectionPolicy="ON_DEMAND" LocalAccessPoint="BEA001"
NWAddr="//10.3.0.14:53401" Name="WTCRemoteTuxDom-1056499341890"/>
</WTCServer>
==================================================================
4. DMConfig on on clarify machine:
==================================================
# DMCONFIG FILE
*DM_RESOURCES
 VERSION="U22"
*DM_LOCAL
CLAR115 GWGRP=GWDOM
 TYPE="TDOMAIN"
 DOMAINID="CLAR115"
 AUDITLOG="/u02/program/tuxedo/clr_115/AUDITLOG"
 BLOCKTIME=10
 CONNECTION_POLICY="ON_DEMAND"
 DMTLOGDEV="/u02/program/tuxedo/clr_115/DMTLOG"
 DMTLOGNAME="DMTLOG_TDOM"
 MAXDATALEN=56
 MAXRACCESSPOINT=89
 MAXTRAN=100
 BLOB_SHM_SIZE=1000000
*DM_REMOTE
BEA001 TYPE=TDOMAIN
 DOMAINID="BEA001"
*DM_TDOMAIN
BEA001 NWADDR="//172.24.3.208:7001"
# NWDEVICE="/dev/tcp"
CLAR115 NWADDR="//jupiter:53401"
# NWDEVICE="/dev/tcp"
*DM_LOCAL_SERVICES
CB_EXESUB LDOM="CLAR115"
*DM_REMOTE_SERVICES
===============================================================
<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
<title></title>
</head>
<body>
Bhaskar, 
You are probably using the //172.24.3.208:7001 port for other purposes
and
this is 
causing the problem(e.g. 7001 is the default WLS admin port).Try changing
the 
NWAddr port number for the WTCLocalTuxDom.. 
Bob Finan 
 
Bhaskar wrote: 
<blockquote type="cite" cite="[email protected]">
<pre wrap="">I am trying to connect a clarifyCRM 11.5 based system
from BEA WebLogic 7.0 Sp2
through WebLogic Tuxedo Connector.
I am getting a "Bad Message" error on the clarify side. PLease let me
know what
might be the error.
Details are as follows:
================
1. BEA Weblogic is installed on Win2k and Clarify is installed on Solaris8.
2. On Solaris8 machine, the ULog shows the following error:
==============================================
150353.jupiter!GWTDOMAIN.8761.1.0: LIBGWT_CAT:1129: INFO: Connection
established
with domain (domainid=<BEA001
</pre>
<blockquote type="cite">
<pre wrap="">)
</pre>
</blockquote>
<pre wrap="">150354.jupiter!GWTDOMAIN.8761.1.0: LIBGWT_CAT:1313:
ERROR: Bad message from BEA001.
Closing file descriptor
150354.jupiter!GWTDOMAIN.8761.1.0: LIBGWT_CAT:1130: INFO: Disconnected
from domain
(domainid=<BEA001>)
150354.jupiter!GWTDOMAIN.8761.1.0: LIBGWT_CAT:1354: INFO: Retrying domain
(domainid=<BEA001>)
every 60 seconds
==========================================================
3.The configuration for WTC in config.xml :
===========================================================
<WTCServer Name="MyWTCServer" Targets="myserver">
<WTCImport LocalAccessPoint="BEA001"
Name="WTCImport-1056499621875"
RemoteAccessPointList="CLAR115" RemoteName="CB_EXESUB" ResourceName="MyImportedService"/>
<WTCLocalTuxDom AccessPoint="BEA001" AccessPointId="BEA001"
ConnectionPolicy="ON_DEMAND" MaxRetries="5000000"
NWAddr="//172.24.3.208:7001" Name="WTCLocalTuxDom-1055806963906"/>
<WTCRemoteTuxDom AccessPoint="CLAR115" AccessPointId="CLAR115"
ConnectionPolicy="ON_DEMAND" LocalAccessPoint="BEA001"
NWAddr="//10.3.0.14:53401" Name="WTCRemoteTuxDom-1056499341890"/>
</WTCServer>
==================================================================
4. DMConfig on on clarify machine:
==================================================
# DMCONFIG FILE
*DM_RESOURCES
 VERSION="U22"
*DM_LOCAL
CLAR115 GWGRP=GWDOM
 TYPE="TDOMAIN"
 DOMAINID="CLAR115"
 AUDITLOG="/u02/program/tuxedo/clr_115/AUDITLOG"
 BLOCKTIME=10
 CONNECTION_POLICY="ON_DEMAND"
 DMTLOGDEV="/u02/program/tuxedo/clr_115/DMTLOG"
 DMTLOGNAME="DMTLOG_TDOM"
 MAXDATALEN=56
 MAXRACCESSPOINT=89
 MAXTRAN=100
 BLOB_SHM_SIZE=1000000
*DM_REMOTE
BEA001 TYPE=TDOMAIN
 DOMAINID="BEA001"
*DM_TDOMAIN
BEA001 NWADDR="//172.24.3.208:7001"
# NWDEVICE="/dev/tcp"
CLAR115 NWADDR="//jupiter:53401"
# NWDEVICE="/dev/tcp"
*DM_LOCAL_SERVICES
CB_EXESUB LDOM="CLAR115"
*DM_REMOTE_SERVICES
===============================================================
</pre>
</blockquote>
 
</body>
</html>
[att1.html]

KDE Printer Manager fails with "client-error-bad-request"

I'm having some trouble with printing on my system. The KDE printer manager shows "client-error-bad-request" and no other information. When I run the KCM from the command line, I also get "kcmshell(17286) KCupsRequest::serverError: status unrecognised: 1024" on the console. I wasn't able to find any useful information on this issue on google or these forums; not even what the 1024 status code means. It seems to me that this may be a bug in the kcm_printer_manager module, but I'd like to rule out other possibilities first. Unfortunately, I don't know what to try from here. I'll provide as much potentially relevant information as I can think of below.
Changes since last successful print job:
Multiple updates to KDE packages
Update to cups that changed systemd unit file names.
Stopped and disbled old units
daemon-reload
Enable and start new units
Other updates to cups since then, if I recall correctly.
Packages and versions:
kdeutils-print-manager 4.14.3-1 (owns kcm_printer_manager module for kcmshell4)
kdebase-runtime 4.14.3-1 (owns kcmshell4 binary)
cups 2.0.1-1
libcups 2.0.1-1
systemd 218-1
linux 3.17.6-1
Let me know if any other information might be helpful.

Anyone please help.
Thanks,
Orton

A message will pop up (Exc in ev handl: Error: Bad NPObject as private data!) and the tab I was on will close out and reopen in a new window. Why is it happening and how do I stop it?

Okay, I will have a window open with 4 tabs open. At first, everything is fine, but after a day or so, a message will pop up on screen saying "'''Exc in ev handl: Error: Bad NPObject as private data!'''" and after you close it out, the tab you were on will close and reopen in it's own window. I then have to shut down all both old and new windows and open a new window with my original 4 tabs again. It will work fine until a few days pass and it starts over again.

This issue can be caused by the McAfee Site Advisor extension
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
Start Firefox in [[Safe Mode]] to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode

After updating Firefox I am getting this message any time I do anything "Exc in ev handl:Error: Bad NPObject as private data"

This error happens each time I use Mozilla. especially when I click on an extension or try to work in any of my e-mail accounts (Yahoo, Gmail, or RCN). Sometimes I am able to continue by just clicking OK and other times it prevents me from completing my task. This started happening right after I downloaded and installed your latest version of Firefox. I see others are having the same problem. Error message is "Exc in ev handl:Error: Bad NPObject as private data"

That issue can be caused by the McAfee Site Advisor extension
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
Start Firefox in [[Safe Mode]] to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode

Parameter error - bad bind variable in a Package..!!

Hello All
i am tring to create a security package with in one procedure i am trying to handle the number of times the user enters the wrong user name or password:
-i created a parameter on my login form and add it to my procedure and it works just fine,But when i tried to copy the same procedure the package inside my library can't recognize that Parameter.
-It gives me error : bad bind variable.
The code is as follows.
PARAMETER.COUNT := :PARAMETER.COUNT + 1;
IF :PARAMETER.COUNT > 3 THEN
WRONG_ALERT('WRONG_PASS',' ur number of trials has expiered the form will be closed ');
EXIT_FORM;
END IF;
Can anyboady help me pls.
Regards,
Abdetu.

Super,It works Just fine.
Thanks Gerd,
That's make me decide that if i have the following statatment for example:
IF :USER_CODE IS NULL THEN .........
I have to change it to :
IF copy (name_in ('USER_CODE' )) IS NULL THEN..........
But,if i have the following select statment :
==============================
     SELECT USER_CODE , USER_PASS WORD
     INTO :GLOBAL.USER_CODE , :GLOBAL.USER_PASS WORD
     FROM APP_USERS
     WHERE USER_CODE = :USER_CODE
     AND USER_PASS WORD= :USER_PASS WORD;
Should i transfer it to the following:
=========================
SELECT USER_CODE , USER_PASS WORD
INTO     COPY(NAME_IN ('GLOBAL.usr_code'), COPY(NAME_IN ('GLOBAL.PASSWORD')
FROM APP_USERS
     WHERE USER_CODE = COPY(NAME_IN ('USER_CODE' )
AND USER_PASS WORD=COPY(NAME_IN ('USER_PASS WORD');
Pls help me,it's my first time ...
Thanks in advance.
Regards,
Abdetu.

PI MDM Adapter Error - MDM port not found

We are working on an R/3 - PI - MDM scenario using the PI MDM Adapter. We are currently encountering the following errors.
In RWB - Communication Channel Monitoring
MDM Adapter listener could not start due to: Can not create repository session '<server=XXXXXXXX serverUser=Admin repository=Product user=Admin>' caused by: Connection Failed: Cannot create connection to MDM Server 'XXXXXXXX' for one of the following reasons: (1) server does not exist, (2) server is not started, or (3) input/output problem while creating connection, error code: UnknownServer
In RWB - Message Monitoring
2009-09-08 15:31:22 Error Message could not be forwarded permantely to the JCA adapter. Reason: System error: MDM port not found
2009-09-08 15:31:22 Error Message could not be forwarded to the JCA adapter. Reason: Permanent error: Adapter call failed. Reason: com.sap.aii.af.lib.ra.cci.XIAdapterException: System error: MDM port not found
2009-09-08 15:31:22 Error Adapter Framework caught exception: System error: MDM port not found
2009-09-08 15:31:22 Error Delivering the message to the application using connection MDM_http://sap.com/xi/MDMAdapter failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.aii.af.lib.ra.cci.XIAdapterException: System error: MDM port not found.
Is there an issue with our receiver communication channel and the MDM Access Parameters? We are using the Port code and Remote System code provided by the MDM team.
Anyone experience this same issue?

We are no longer seeing the MDM Port Not found error, but we are still seeing the UnknownServer error. Looking at RWB Message Monitoring it appears that the message is successfully sent to the MDM server, but nothing is coming into the Ready folder. Any ideas on where the message is going, and why it is not showing up in the Ready folder?
In RWB - Communication Channel Monitoring
MDM Adapter listener could not start due to: Can not create repository session '<server=XXXXXXXX serverUser=Admin repository=Product user=Admin>' caused by: Connection Failed: Cannot create connection to MDM Server 'XXXXXXXX' for one of the following reasons: (1) server does not exist, (2) server is not started, or (3) input/output problem while creating connection, error code: UnknownServer
In RWB - Message Monitoring
2009-09-11 14:04:15 Information The message was successfully received by the messaging system. Protocol: XI URL: http: //XXXXXXXX/MessagingSystem/receive/AFW/XI Credential (User): PIISUSER
2009-09-11 14:04:15 Information Using connection MDM_http ://sap.com/xi/MDMAdapter. Trying to put the message into the receive queue.
2009-09-11 14:04:15 Information Message successfully put into the queue.
2009-09-11 14:04:15 Information The message was successfully retrieved from the receive queue.
2009-09-11 14:04:15 Information The message status was set to DLNG.
2009-09-11 14:04:15 Information Delivering to channel: MDS_TEST_CC
2009-09-11 14:04:15 Information The message was successfully delivered to the application using connection MDM_http ://sap.com/xi/MDMAdapter.
2009-09-11 14:04:15 Information The message status was set to DLVD.
I thought the implementation of the MDM Adapter was suppose to be straightforward and simple
Edited by: Chris Williar on Sep 11, 2009 9:56 PM

10g declare :global variable error (bad bind variable)

In a 10g form, I tried this code in the pl/sql block and in the spec of a library package
begin
:global.config := 'x';
...upon compile, I get an error
"bad bind variable"
...encountered the symbol "GLOBAL" when expecting one of the following...It doesn't like :GLOBAL.variablename := 'x';
What am I doing wrong?
Thank you.

globals are allowed in librarys, but in libraries you have to use COPY and NAME_IN to access objects you access via :-logic in forms-modules, e.g. setting the global would be like
COPY('X', 'GLOBAL.CONFIG');Edited by: aweiden on 29.10.2008 19:33

Image Item - Error: bad bind variable

Hi All,
I select a Image field from a table and set it to a Image Item in a form 10g. But I have error "Bad bind variable"
Here is source code in my Post_query trigger:
SELECT cust_sign INTO :dema_depo.dema_depo_sign
FROM cust_sign WHERE custcod = :dema_depo.cust_sign_custcod;
I would like to learn if you have any solution or document to solve my problem.
Thanks very much for your help!
BACH

Dear Sir/Madam,
I'm reading chapter 16: Working with Images - Oracle Forms Developer's Guide and found that cannot write a SELECT statement to select a a LONG RAW value INTO an image item.
Thus, any the other way to fetch fr a DB LONG RAW value INTO an image item ???
Many thanks!
BACH

Exc in ev handl: Error: Bad NPObject as private data! How do I ge rid of this?

Exc in ev handl: Error: Bad NPObject as private data! I get this error when opening and closing tabs. It only happens when using Firefox. I am running 7.0.1 on a 64 bit version of windows. While researching this problem I discovered thousands of people have the problem. This just started recently. No real fixes or causes have been found. One solution listed was to disable McAfee site adviser which I use and have no plans to remove. I really like Firefox but if I must choose between it and Site adviser I'll have to switch to another browser.

Please see solution in http://kb.mozillazine.org/Problematic_extensions
for "McAfee Site Advisor".
(Windows): For best results you should uninstall '''McAfee Site Advisor''' from Control Panel > add/change programs (Programs and Features). Reboot the system. Then Reinstall from http://www.siteadvisor.com/ and reboot the system. When installing refuse other suggested (crapware) applications.
 Please mark "Solved" one answer that will best help others with a similar problem -- hope this was it.

I am gettng the following popup when using firfox as my browser: Exc in ev handl: Error: Bad NPObject as private data!

In the past few days I have been getting the following popup when I use firefox as my browser: Exc in ev handl: Error: Bad NPObject as private data!
I assume it came from your latest update. I have windows vista with a 64 bit processor, and I am using the latest version of firefox. I checked to see if I was getting the same error message with explorer and I am not. It appears to be some sort of conflict with java script. Can this be corrected?

re: recommendation -- "Remove McAfee Site Advisor and other extensions/plugins reported in the following lists of Blocked/Problematic extension: "
NO -- I use it to protect my surfing! Why must FireFox insist on constantly breaking 3-rd party vendor apps!?! Even IE doesn't do this.
For all the ballyhoo about FF and how great it is -- it ISN'T when it comes to how it supports other companies apps. (RealPlayer, Google, McAfee, etc.)
Shame on them. I shouldn't have to give up functionality, and in this case protection -- just to use FF

"error: bad port 0xffff len 0x8"

Similar Messages

Maybe you are looking for