ERROR: Basis Start Release not known in putGenSubstNamePuttb()

Solman 3.2 to 4.0 upgrade.
Getting this error immediately after starting Upgrade with SAPup. Prepare finished successfully however!
Using latest version of SAPup together with the Upgrade "Fixes'.
NOTE: I am only using Basis SP11 since SP12 was not available for download and was recommended by prepare. Not totally sure if this is the problem though.
any thoughts are appreciated.
Linwood

Hello Linwood,
The best solution is to reset the upgrade. Which phase are you in now?
Regards,
Joe

Similar Messages

  • CRM error: Data target BPMKT; not known

    Hi,
    I  m working on Loyalty Points Mgmt. which is combination of CRM & BW. I have created a Analysis Process Designer <b>(RSANWB)</b>  Here source is Query & Target is CRM Attributes, In CRM attributes I have selected Data Target :  <b>BPMKT  "Marketing attributes for business partner segmentation".</b> When I am going to active this the system shows "CRM error : Data target BPMKT not known".
    Anyone could help me. Where I am wrong...? How could I correct this Error.
    Thanx in Advance.
    Regards
    Manoj Kulkarni

    Hi Rogier, I got same problem.
    How to resolved it?
    Regards.
    Enrique.

  • Error - Batch definition level not known while UD

    Hi Experts,
    Please help on below Issue
    For Inspectio type 10. After result recording when we do Usage Decision,
    Showing Message :-
              "Batch definition level not known.inconsistency!"
    Regards,
    Raghunandan

    Hi Canan,
    Kindly advise.
    In OMCT
    Batch level - Batch unique at plant level
    Batch status management - Inactive.
    Regards,
    Raghunandan

  • Error Base member can not be parent of in PARENTH 1

    hi Team,
    I have an issue  when I am loading hierarchy data from BI  to BPC.  I have two hierarchies loading from BI to BPC for Cost Center Dimension. However, I do see an error msg saying
    "Base member 'CC3000ABU'  can not be parent of 'CC3000000620000040' in PARENTH'1'.
    when explored further, it is observed that I see this issue only for the text nodes. I have even checked the file in the application server which is updated using open hub services from ocostcenter infoobject from BI and this file seems to be okay. I see the text nodes also added as new member ids in the file.  Just figuring out what could be the reason for this error.
    Any inputs will be of great help.
    Thanks
    Vj

    Hi Experts,
    I Also got the same issue. So could you please tell me " what i need to set the data back to ZERO" i didnt got this point.
    Thanks

  • Error while starting Prepare not able to connect to SAPup.

    Hello,
           Does anyone have idea about the below error?? We are doing an upgrade from BW 3.1 to NW 04s and after starting the UA server while trying to login to the GUI, we are getting the below message.
    msg.adapter.0001 SAPup
    msg.net.0001 localhost 4240
    msg.diag.0002 java.net.ConnectException Connection refused
    Please help!!!
    Best Regards,
    Sami.

    For the list of open ports try the 'netstat' command using something similar to this: 'netstat -a -n'. If you add the '-p' flag then netstat should show the programs assigned to the ports (try 'netstat --help' to get a list of available flags).
    Hope that helps.
    J. Haynes
    Denver, CO
    Message was edited by:
            Joe "Basis Chef" Haynes

  • Receive File Adapter - Error in CallSAPAdapter Name not known

    Using xml to File Adapter. Just want to store the xml file somewhere ie on XI Server in folder E:\usr\sap\interface\XMLfiles
    Getting error in Adapter Engine - Exception caught by adapter framework: Object not found in lookup of CallSAPAdapter.
    Delivery of the message to the application using connection File_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: Object not found in lookup of CallSAPAdapter.: com.sap.engine.services.jndi.persistent.exceptions.NameNotFoundException: Object not found in lookup of CallSAPAdapter..
    Receiver Adapter configured to receive file write a .tmp version no conversion so set type to Binary.
    I can see the Communication Channel in the monitor green.
    Any ideas to find the problem
    thanks,

    I tried changing the communication channel as suggested with no further success. I have viewed the LogViewer on the server in cluster->server->logs defaultTrace.trc and com.sap.xi -> xi.log with no more information available.
    So is it that I cannot do a simple XML send to file receiver and leave its content unchanged?
    My test message payload was of the order
    <?xml version="1.0"?><LIST><S_STX><C_STDS><D_STDS1>... with all the data in.
    Adapter type = file
    Receiver
    Transport Protocol = File System (NFS)
    Message Protocol = File
    Adapter Engine = Integration Server
    Target Directory = E:/usr/sap/Interfaces/XMLFiles (and tried it with /usr/sap/interface/XMLFiles)
    Create filedirectory = ticked
    Filename filename.xml
    File Construction Mode = add timestamp
    Write Mode = use temporary file
    Temporary filename scheme = filename.tmp
    Filetype = Binary
    Module Tab
    1     localejbs/CallSAPAdapter     Local Enterprise Bean     0
    and thats it.
    On testing from the Integration Engine it reaches the Adapter Engine and reports the error as stated in my first post.
    The message data is of the construct
    - <SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
    - <SOAP:Header>
    - <sap:Main xmlns:sap="http://sap.com/xi/XI/Message/30" versionMajor="3" versionMinor="0" SOAP:mustUnderstand="1" xmlns:wsu="http://www.docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" wsu:Id="wsuid-main-92ABE13F5C59AB7FE10000000A1551F7">
      <sap:MessageClass>ApplicationMessage</sap:MessageClass>
      <sap:ProcessingMode>asynchronous</sap:ProcessingMode>
      <sap:MessageId>09c99665-f3cf-d247-993b-8cb46c37d820</sap:MessageId>
      <sap:TimeSent>2007-09-19T16:42:31Z</sap:TimeSent>
    - <sap:Sender>
      <sap:Party agency="http://sap.com/xi/XI" scheme="XIParty">AS2</sap:Party>
      <sap:Service>XMLFILE</sap:Service>
      </sap:Sender>
    - <sap:Receiver>
      <sap:Party agency="http://sap.com/xi/XI" scheme="XIParty">MyCompany</sap:Party>
      <sap:Service>XMLFILE</sap:Service>
      </sap:Receiver>
      <sap:Interface namespace="http://warburtons.com/genhdr">MI_XMLFILE_V3</sap:Interface>
      </sap:Main>
    - <sap:ReliableMessaging xmlns:sap="http://sap.com/xi/XI/Message/30" SOAP:mustUnderstand="1">
      <sap:QualityOfService>ExactlyOnce</sap:QualityOfService>
      </sap:ReliableMessaging>
    - <sap:Diagnostic xmlns:sap="http://sap.com/xi/XI/Message/30" SOAP:mustUnderstand="1">
      <sap:TraceLevel>Information</sap:TraceLevel>
      <sap:Logging>Off</sap:Logging>
      </sap:Diagnostic>
    - <sap:HopList xmlns:sap="http://sap.com/xi/XI/Message/30" SOAP:mustUnderstand="1">
    - <sap:Hop timeStamp="2007-09-19T16:42:31Z" wasRead="false">
      <sap:Engine type="IS">is.00.srvsapxidev</sap:Engine>
      <sap:Adapter namespace="http://sap.com/xi/XI/System">XI</sap:Adapter>
      <sap:MessageId>09c99665-f3cf-d247-993b-8cb46c37d820</sap:MessageId>
    - <sap:Branch>
      <sap:MessageId>707ecbbd-a474-514d-b731-f4003c38c4df</sap:MessageId>
      <sap:Party agency="http://sap.com/xi/XI" scheme="XIParty">ASD</sap:Party>
      <sap:Service>IP_I_XMLFILE_Collect</sap:Service>
      </sap:Branch>
    - <sap:Branch>
      <sap:MessageId>09c99665-f3cf-d247-993b-8cb46c37d820</sap:MessageId>
      <sap:Party agency="http://sap.com/xi/XI" scheme="XIParty">MyCompany</sap:Party>
      <sap:Service>XMLFILE</sap:Service>
      </sap:Branch>
      <sap:Info>3.0</sap:Info>
      </sap:Hop>
    - <sap:Hop timeStamp="2007-09-19T16:44:56Z" wasRead="false">
      <sap:Engine type="AE">af.xid.srvsapxidev</sap:Engine>
      <sap:Adapter namespace="http://sap.com/xi/XI/System">XIRA</sap:Adapter>
      <sap:MessageId>09c99665-f3cf-d247-993b-8cb46c37d820</sap:MessageId>
      </sap:Hop>
      </sap:HopList>
      </SOAP:Header>
    - <SOAP:Body>
    - <sap:Manifest xmlns:sap="http://sap.com/xi/XI/Message/30" xmlns:xlink="http://www.w3.org/1999/xlink" xmlns:wsu="http://www.docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" wsu:Id="wsuid-manifest-5CABE13F5C59AB7FE10000000A1551F7">
    - <sap:Payload xlink:type="simple" xlink:href="cid:[email protected]">
      <sap:Name>PayloadName</sap:Name>
      <sap:Description>PayloadDescription</sap:Description>
      <sap:Type>Application</sap:Type>
      </sap:Payload>
      </sap:Manifest>
      </SOAP:Body>
      </SOAP:Envelope>
    The Payload is
      <?xml version="1.0" ?>
    - <LIST>
    etc
    Message status
    2007-09-19 17:44:56 Success Message successfully received by messaging system. Profile: XI URL: http://srvsapxidev:50000/MessagingSystem/receive/AFW/XI Credential (User): XIISUSER
    2007-09-19 17:44:56 Success Using connection File_http://sap.com/xi/XI/System. Trying to put the message into the receive queue.
    2007-09-19 17:44:56 Success Message successfully put into the queue.
    2007-09-19 17:44:56 Success The message was successfully retrieved from the receive queue.
    2007-09-19 17:44:56 Success The message status set to DLNG.
    2007-09-19 17:44:56 Success Delivering to channel: CC_toMyCompany_XMLFILE
    2007-09-19 17:44:56 Error Exception caught by adapter framework: Object not found in lookup of CallSAPAdapter.
    2007-09-19 17:44:56 Error Delivery of the message to the application using connection File_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: Object not found in lookup of CallSAPAdapter.: com.sap.engine.services.jndi.persistent.exceptions.NameNotFoundException: Object not found in lookup of CallSAPAdapter..
    2007-09-19 17:44:56 Success The asynchronous message was successfully scheduled to be delivered at Wed Sep 19 17:49:56 BST 2007.
    2007-09-19 17:44:56 Success The message status set to WAIT.
    Now I have been reading all the documentation available and forum questions in this area but there is a lot of information but not quite for what I am currently trying to do. I need to preserve the xml file as xml for further processing. This is just a resting place for the file as I am trying to cut down a long running (over a day) collect BPM scenario by collecting the files in the directory then triggering the collect scenario to read in the files from this directory and perform all the processing and mapping in one chunk of short time. (But that is another story)
    Any more suggestions appreciated could the SAPCallAdapter not be where I think it is? Does my directory and filename case have to be exact lower and upper case. (I will test this tomorrow)...and let you know if any difference and continue to read the links put on by the other person who answered.
    thanks,

  • Imessage internal error on start up/not responding - mac

    Hi,
    Unfortunately I'm having another problem, this time with the imessage application.
    When I open the app, the imessage window does not open up. When I double click the application it says "application not responding" I then force quit. One forcing the quit I try reopening the app, the same thing happens again!
    I changed the preferences for the app to open at login, so when I shut it down and reopen it 'has to' open. But this does not happen and a message appears 'internal error' or something like that and then it quits on me and suggests I reopen the app. I did reopen it the same issue still occurs.
    The only time the app opens is when i get a notification of a message from the notification centre, I click to open. It only opens up normally after like 15 minutes of waiting and works fine. But when i quit the app the same original problem occurs.
    Looking forward to any suggesting
    Thanks
    Katherine

    Please read this whole message before doing anything.
    Back up all data.
    Quit Messages if it’s running.
    Step 1
    Hold down the option key and select
    Go ▹ Library
    from the Finder menu bar. Move the following items from the Library folder to the Trash (either may not exist):
    Caches/com.apple.Messages
    Caches/com.apple.imfoundation.IMRemoteURLConnectionAgent
    Leave the Library folder open. Log out and log back in. Try Messages again. If it works now, stop here. Close the Library folder.
    Step 2
    If you still have problems, quit Messages again. Go back to the Finder and move the following item from the open Library folder to the Desktop:
    Messages
    Note: you are not moving the Messages application. You’re moving a folder named “Messages.”
    Test. If Messages now works, delete the Messages folder on the Desktop. Otherwise, quit Messages again. Put back the folder you moved, overwriting the newer one that may have been created in its place, and continue.
    Step 3
    In the Preferences subfolder, there may be several files having names that begin with any of the following strings:
    com.apple.iChat
    com.apple.imdsmsrecordstore
    com.apple.imessage
    com.apple.imservice
    Move them all to the Desktop. There may also be a file with the name "com.apple.imagent.plist". Move that to the Trash.
    Also in the Preferences folder, there's a subfolder named "ByHost". Open it and do the same thing.
    Log out and log back in. Test again. This time Messages should perform normally, but your settings will be lost. You may be able to put back some of the files you moved to the Desktop in this step. Relaunch and test after each one. Eventually you should find one or more that causes Messages to malfunction. Delete those files and recreate whatever settings they contained.
    If the issue is still not resolved, quit Messages again and put all the items you moved to the Desktop back where they were. You don’t need to replace the items you moved to the Trash. Stop here and post again.
    If you later decide that you don’t like the results of steps 2 and 3, you can undo them completely by quitting Messages and restoring the items you deleted in those steps from your backup.

  • Airport Base Station - Password Not Known

    I bought an used airport extreme base station in the internet. The station works, I can go to the internet but I can't make any changes by the airport administration programm. It always asks me for a password which I don't have. What can I do?

    I don't have an "Airport Extreme" to say first hand, but perhaps you could try resetting it…
    http://docs.info.apple.com/article.html?artnum=107451

  • Error : Batch definition level not known

    hello,
    Any body know how to resolve this error.
    Some transaction gives this Error.
    First i was Copied a new Client In IDES for source client 800.
    User Profile is SAP_ALL & SAP_NEW in both client 800 & new 910 but 910 shows such error.
    Also during copy process it shows deleted lines 4
    Is it due to deleted lines?

    Hi Canan,
    Kindly advise.
    In OMCT
    Batch level - Batch unique at plant level
    Batch status management - Inactive.
    Regards,
    Raghunandan

  • Field name is not known Error in formula field...

    Hi,
    I have a report in CR11.5 r2 that I call from VB6.
    The report works fine, until a I create this formula, Trim ({RSE.PatName}).
    When I put this formula field in a section in the report, I have this error, "Field name is not known Error".
    Any idea?

    Make sure you have SP 6:
    https://smpdl.sap-ag.de/~sapidp/012002523100015859952009E/crxir2win_sp6.exe
    Does the formula work in the designer?
    Are you changing datasource at runtime? If so, can you change to that datasource in the designer and run the report there?
    If you do not use the Trim function, does it work?
    If you do not use the field in a formula abd place it in say, the detail section as a test, does the report work?
    But remember that what ever the report is doing at runtime, must work in the designer 1st.
    Ludek
    Follow us on Twitter http://twitter.com/SAPCRNetSup

  • Customer , vendor 0000049256 not known (EDI process)

    We are trying to send an IDoc type INVOIC from one SAP R/3 system to
    another using the SAP XI/PI.
    Right now we are experience an error “Customer , vendor 0000049256 not
    known”, after have check all ALE/EDI configuration between the source
    system (SAP R/3 4.6B), the middleware (SAP XI/PI 7.0) and the receiver
    system (SAP R/3 4.6B with IS-OIL) we still don’t find the solution.
    We applied the note 117814, with the following code (file attach).
    Source (SD module sends an IDoc type INVOIC) SAP R/3 4.6B
    BASIS 53
    ABAP 53
    APPL 53
    Middleware (SAP XI/PI 7.0)
    BASIS 12
    ABAP 12
    Target (MM module receives an IDoc type INVOIC) SAP R/3 4.6B
    BASIS 38
    ABAP 38
    APPL 37
    IS-OIL 37
    Can someone help us?
    Thanks in advance
    Un Saludo/Regards/Mit freundlichen Grüssen,
    João Paulo Reis
    Accenture – SI SAP - Technology
    Edificio Accenture
    C/Ramírez de Arellano, 35
    Madrid - Spain 28043
    T: +34 915966000
    F: +34 91 596 6695
    Mobile : + 34 606432447

    Hello Joao,
    Check your logical system which represent the R/3 did you Configured the Customer Distribution Model correctly?Do an initial check  for ports,partner profile and inbound/outbound parameters.
    Regards,
    jafer

  • Service Desk: Basis Message has not been created

    Hi Experts
    After applying the laster patches on our SolMan (CRM Component) the Service Desk is not working properly.
    When creating a ticket with TA NOTIF_CREATE the error message pops up:
    Message 000000XXXX created in <SID> with the following error: Basis message has not been created.
    We use the standard Notification types. Like SLFN and SLF1 (For ABA message)
    In TA DNO_CUST01 there is the standard config. activ also standard Action Profile: SLFN0001_STANDARD_DNO
    Number Range: 01
    Application: DNO_NOTIF
    In TA DNO_CUST04: PROCESS_TYPE: SLFN, RFCDEST_SOL_MANAGER: NONE
    The ticket is available in the monitor TA, but the ABA Message is missing. All the details concerning the satellite System is missing too and can also not be maintained manually.
    If someone has had this problem as well, I would be very interested to hear the solution.
    Thank you very much for your help.
    Dominik

    Hello Dominik,
    so log is red right like you have an error ?
    I don t understand why you have this log though cause this message is 060 from class 'DNO'. And there is only 4 function calls that launch error with parameter you re facing (I_PARN) that concerns partners (actors of your ticket) !
    And when putting a breakpoint in these 4 function calls and retesting; Solman, at least mine does nt go in any one of them.
    You can maybe do the test on your side. The 4 function moduls are (tr SE37, first line each time)
    DNO_DB_EX_PAR_USER_CHECK
    DNO_DB_EX_PAR_USER_DISP
    DNO_DB_EX_PAR_ADDR_CHECK
    DNO_DB_EX_PAR_ADDR_DISP
    Please put a break point in each one of them and launch transaction crmd_order again and retest.
    Could you please confirm that Solman goes there and that parameter i_parn is actually empty...?
    Regards
    Khalil
    Edited by: Khalil SERRHINI on Aug 2, 2010 3:08 PM

  • Release notes for iPlanet-WebServer-Enterprise/4.1SP7

    Hi,
    Where can i get the release notes, known bugs and fixes for iPlanet-WebServer-Enterprise/4.1SP7.
    Plesae reply back.
    Thanx
    Shiva

    Hi,
    You can find the release note for iPlanet Web Server SP7 from the following link
    http://docs.sun.com/?p=/doc/816-5676-10
    Srini

  • BPM_DATA_COLLECTION fails with (Output device "" not known) error

    Hi all,
    I have an issue with Output BPM_DATA_COLLECTION_1 job in the satellite system  failing with 'Output device "" not known error.  Since it is collecting data for Solution Manager system why does is it trying to find an output device.
    It did not fail before and now I added another key figure (custom one) which is done the same way the other custom monitors are done in "Z_BPM_ECU_COLLECTOR" report and then in /SSA/EXM program, but the collector job started to fail.
    Also, for some reason there are two BPM_DATA_COLLECTION jobs, one is BPM_DATA_COLLECTION_1 and the other is BPM_DATA_COLLECTION_2.  _1 runs every 5 min and _2 is less frequent. They both seem to runt the same job which is /SSA/EXS. Why are there two jobs scheduled from solution manager in my satellite system?
    Thank you very much for your help!

    I am experiencing this same issue in our ECC 6.0 system.  We currently have ST-A/PI release 01M_ECC600 level 0001 applied to our system.  These jobs finish successfully in SM37, but I'm seeing the same error messages in our system logs (SM21).
    When I try to update the output device that is associated with these jobs, the user ID running the jobs is not valid since it's user type is Communication Data.
    Does anyone know if it ok to change the user for this job? Should it be run by DDIC?  I believe the jobs were created automatically when we applied ST-A/PI release 01M_ECC600 level 0001.

  • Transfer Billing document to accounting, Error: 'Object not known in COu2019

    Hi all,
    I have created an acquisition contract and subsequently created a billing document in CRM but when I try and transfer this to accounting, the system displays error message IAOM028 u2013 u2018Object not known in COu2019.  My account assignment category on the contract is EROBJ u2013Profitability Segment CO-PA, however I have tried creating acquisition contracts with other account assignments but the same error occurs, even though the controlling object exists in SAP ERP. Iu2019ve searched the SAP notes and I did see note 683886, but this affected release 4 and we are working with release 7. Any help or advice in resolving this error would be much appreciated.
    Alternatively how do I mark the item category as not relevant to CO? For now itu2019s not imperative that I post to a controlling object? The SAP help portal refers to selecting (or in my case deselecting) the Service setting in the Assign BW/CO fieldu2019 but I canu2019t find this field on the item category. Any advice again would be greatly appreciated.
    Many Thanks
    Lee

    Hello,
    The reason might be the transfer error, is due to the incomplete distribution of the order/contract to R/3 account assignment table IAOM_EXT_OBJ_INF.
    For your invoice, check entry for document number/item number. It might be missing and if so, system shows error message as you mentioned.
    If entries are missing, then the order/contracts need to be re-distributed to R/3, so that the entries are created for these missing items in the IAOM tables. The transfer process then will complete missing entries successfully.
    To re-distribute to R/3, the respective document needs to be save after making a change in the document. Unless there is a change in the document, the re-distribution will not happen.
    I hope this information may helpful to solve your issue.
    Regards,
    Harshad Patel.
    Edited by: Harshad Patel on Jan 27, 2012 8:20 AM

Maybe you are looking for