Error - Batch definition level not known while UD

Hi Experts,
Please help on below Issue
For Inspectio type 10. After result recording when we do Usage Decision,
Showing Message :-
"Batch definition level not known.inconsistency!"
Regards,
Raghunandan

Hi Canan,
Kindly advise.
In OMCT
Batch level - Batch unique at plant level
Batch status management - Inactive.
Regards,
Raghunandan

Similar Messages

Error : Batch definition level not known

hello,
Any body know how to resolve this error.
Some transaction gives this Error.
First i was Copied a new Client In IDES for source client 800.
User Profile is SAP_ALL & SAP_NEW in both client 800 & new 910 but 910 shows such error.
Also during copy process it shows deleted lines 4
Is it due to deleted lines?

Hi Canan,
Kindly advise.
In OMCT
Batch level - Batch unique at plant level
Batch status management - Inactive.
Regards,
Raghunandan

Batch definition level not known System inconsistency

Hi gurus,
When I create a new material via trcode MM01 the Error message displays:"Batch definition level not known System inconsistency"
How can I correct the error?
Thanks&Regards

Hi,
Are you trying to set the batch flag at the same time?
If so you need to set the configuration for batch management to indicate if batches are to be unique at the plant level etc.
SPRO Logistics General > Batch management > specify batch level and activate status management
Steve B

Getting error u201CWorkflow definition 'WS04200009' not in version '0000'u201D

Hi all,
I have a requirement where I have to use/ enhance the standard HR workflow template WS04200009 for leave approval.
The problem is when I click on Workflow Builder in PFTC, its giving the following error :-
u201CWorkflow definition 'WS04200009' not in version '0000'u201D.
SAP has given details for this error like this:-
u201CWorkflow definition 'WS04200009' not in version '0000'
Message no. WD401
Diagnosis
The workflow definition with the ID WS04200009 in version 0000 could not be read from the database.
System Response
The call to the Workflow Builder had to be cancelled.
Procedure
Refer to your workflow system administrator.u201D
Secondly, I tried to copy this standard workflow template to a custom one.
But here also, its copying only the Workflow Container elements, workflow template is not coming.
Please guide me what can be the solution.
Regards
Navjot Singh.

Hi Navjot.
We faced the same issue, and need to apply the OSS note - 962488. (Recommended by SAP). After applying the note you need to execute the FM - SWD_WFD_REPLICATE_FROM_9999 input parameter as the workflow ID which is missing.
Hope this will be helpful for you. All the best.
- Mohan Vamsi

Error : Workflow definition does not exits(T-code : SWU7 )

Hi All,
I checked my workflow template in SWU7 .Its gives me error "Workflow definition does not exits".
In the bottom left of screen it displays message : "Container Element ZBUS2081 is not used".
How can remove this error ? Please help..

Hi ,
The method used is standarad "GETEMAILDATA".
no changes have been done to this.
In bindings(exist)
Workflow Step 'Get data from Email'
&INCOMINGINVOICE.PAYMENTBLOCK& &PAYMENTBLOCK&
Then in Containers tab{ other tabs include basic data,description,triggering events,terminating events,defualt values,sapphone)
this expression have been defined :
abap dict. refernce : RBKP-ZLSPR
PROPERTIES : IMPORT,EXPORT and MANDATORY.
The BO name is ZBUS2081
For BOR ZBUS2081
bus2081.PaymentBlock datatype refernce : RBKP-ZLSPR
method defined :bus2081.BlockedPriceCheck
Kindly check if fine.
Edited by: ujjwal dharmak on Nov 22, 2010 9:14 PM

CRM error: Data target BPMKT; not known

Hi,
I m working on Loyalty Points Mgmt. which is combination of CRM & BW. I have created a Analysis Process Designer <b>(RSANWB)</b> Here source is Query & Target is CRM Attributes, In CRM attributes I have selected Data Target : <b>BPMKT "Marketing attributes for business partner segmentation".</b> When I am going to active this the system shows "CRM error : Data target BPMKT not known".
Anyone could help me. Where I am wrong...? How could I correct this Error.
Thanx in Advance.
Regards
Manoj Kulkarni

Hi Rogier, I got same problem.
How to resolved it?
Regards.
Enrique.

Getting error 'Item 00000 does not exist' while creating a salse order

Hi All,
We are facing an issue, we get an error message saying 'Item 00000 does not exist' while creating a sales order for a particular order type, we do not get this problem with all the materials, only a few of them and the materials which give a problem are part of the supersession chain. The problem is not even coming for all the superseded materials.
This problem is occuring with none of the other order types but just one. We have compared the configuration for the order types for which this error is not coming and the order type which is giving the problem, and its exactly the same.
When creating the sales order through VA01 even though the error message comes, but on hitting the enter button the processing goes further. But when creating the sales order through the background program the processing stops the moment the error message comes and the Sales Order does not get created.
Your valuable suggestions for helping us resolving this issue will be highly appreciated.
Regards,
Geeta

HI Geeta
As per your post "Problem is when you are executing VA01 in background sales orders are not generating due to error message".
Apart from configuration check alternative is "Take ABAPer's help and change this error message type to warning/information message type in the system". With warning/information message type you could be able to create sales orders in background also.
try and revert

Page definition is not found while running JSR286 portlet in WebCenter app

Hi All,
I have ADF application which has 3 different task flows 1. my service 2. my car 3. my bike.
which I have placed into a single bounded task flow called repairTaskflow.
I have created a JSR286 portlet out of a repairTaskflow. I am trying to consume it in an Webcenter application. When I place the portlet on to the page in Web center application
and run the page. I see the following error in the console.
oracle.jbo.NoDefException: JBO-25002: Definition ***.xxxx.view.pageDefs.applications_task_flow_applications_task_flow_CreateEmptyApplicationPageDef of type Form Binding Definition is not found.
     at oracle.jbo.mom.DefinitionManager.findDefObjectUsingMetadataObject(DefinitionManager.java:2703)
     at oracle.jbo.mom.DefinitionManager.findDefObjectUsingMetadataObject(DefinitionManager.java:2715)
     at oracle.adf.model.binding.DCBindingContainerDef.findDefObject(DCBindingContainerDef.java:292)
     at oracle.adf.model.binding.DCBindingContainerReference.getDef(DCBindingContainerReference.java:107)
     at oracle.adf.model.BindingContext.findBindingContainerDefByPath(BindingContext.java:1624)
     at oracle.adf.controller.internal.binding.RegionUtils.findOrCreateBindingContainer(RegionUtils.java:246)
     at oracle.adfinternal.controller.util.model.DataBindingActivityImpl.getActivityBindingContainer(DataBindingActivityImpl.java:233)
     at oracle.adfinternal.controller.util.model.DataBindingActivityImpl.beforeExecute(DataBindingActivityImpl.java:77)
     at oracle.adfinternal.controller.engine.ControlFlowEngine.executeActivity(ControlFlowEngine.java:969)
     at oracle.adfinternal.controller.engine.ControlFlowEngine.doRouting(ControlFlowEngine.java:878)
     at oracle.adfinternal.controller.engine.ControlFlowEngine.doRouting(ControlFlowEngine.java:777)
     at oracle.adfinternal.controller.engine.ControlFlowEngine.routeFromActivity(ControlFlowEngine.java:551)
     at oracle.adfinternal.controller.engine.ControlFlowEngine.performControlFlow(ControlFlowEngine.java:147)
     at oracle.adfinternal.controller.application.NavigationHandlerImpl.handleAdfcNavigation(NavigationHandlerImpl.java:109)
     at oracle.adfinternal.controller.application.NavigationHandlerImpl.handleNavigation(NavigationHandlerImpl.java:78)
     at org.apache.myfaces.trinidadinternal.application.NavigationHandlerImpl.handleNavigation(NavigationHandlerImpl.java:43)
     at com.sun.faces.application.ActionListenerImpl.processAction(ActionListenerImpl.java:130)
     at org.apache.myfaces.trinidad.component.UIXCommand.broadcast(UIXCommand.java:190)
     at oracle.adf.view.rich.component.fragment.UIXRegion.broadcast(UIXRegion.java:148)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.broadcastEvents(LifecycleImpl.java:879)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:312)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:185)
     at org.apache.myfaces.portlet.faces.bridge.BridgeImpl.doFacesRender(BridgeImpl.java:1002)
Please find below the portlet.xml file
<portlet-app version="2.0" xsi:schemaLocation="http://java.sun.com/xml/ns/portlet/portlet-app_2_0.xsd http://java.sun.com/xml/ns/portlet/portlet-app_2_0.xsd" xmlns="http://java.sun.com/xml/ns/portlet/portlet-app_2_0.xsd" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
    <portlet id="adf_taskflow_WEB_INF_test_task_flow_xml">
        <description>test-task-flow</description>
        <portlet-name>test-task-flow</portlet-name>
        <display-name>test-task-flow</display-name>
        <portlet-class>oracle.portlet.bridge.adf.application.ADFBridgePortlet</portlet-class>
        <init-param>
            <name>javax.portlet.faces.defaultViewId.view</name>
            <value>/adf.task-flow?adf.tfDoc=/WEB-INF/adfp-portlet-bridge-container.xml&adf.tfId=adfp-portlet-bridge-container&_fragmentTaskFlowDoc=/WEB-INF/test-task-flow.xml&_fragmentTaskFlowId=test-task-flow</value>
        </init-param>
        <supports>
            <mime-type>text/html</mime-type>
            <portlet-mode>VIEW</portlet-mode>
        </supports>
        <supported-locale>en</supported-locale>
        <portlet-info>
            <title>test-task-flow</title>
            <short-title>test-task-flow</short-title>
        </portlet-info>
        <security-role-ref>
            <role-name>valid-users</role-name>
        </security-role-ref>
        <container-runtime-option>
            <name>com.oracle.portlet.requireIFrame</name>
            <value>true</value>
        </container-runtime-option>
        <container-runtime-option>
            <name>com.oracle.portlet.minimumWsrpVersion</name>
            <value>2</value>
        </container-runtime-option>
    </portlet>
    <portlet id="adf_taskflow_WEB_INF_single_task_flow_definition_xml">
        <description>single-task-flow-definition</description>
        <portlet-name>single-task-flow-definition</portlet-name>
        <display-name>single-task-flow-definition</display-name>
        <portlet-class>oracle.portlet.bridge.adf.application.ADFBridgePortlet</portlet-class>
        <init-param>
            <name>javax.portlet.faces.defaultViewId.view</name>
            <value>/adf.task-flow?adf.tfDoc=/WEB-INF/adfp-portlet-bridge-container.xml&adf.tfId=adfp-portlet-bridge-container&_fragmentTaskFlowDoc=/WEB-INF/single-task-flow-definition.xml&_fragmentTaskFlowId=single-task-flow-definition</value>
        </init-param>
        <supports>
            <mime-type>text/html</mime-type>
            <portlet-mode>VIEW</portlet-mode>
        </supports>
        <supported-locale>en</supported-locale>
        <portlet-info>
            <title>single-task-flow-definition</title>
            <short-title>single-task-flow-definition</short-title>
        </portlet-info>
        <container-runtime-option>
            <name>com.oracle.portlet.requireIFrame</name>
            <value>true</value>
        </container-runtime-option>
        <container-runtime-option>
            <name>com.oracle.portlet.minimumWsrpVersion</name>
            <value>2</value>
        </container-runtime-option>
    </portlet>
    <portlet id="adf_taskflow_WEB_INF_applications_task_flow_xml">
        <description>applications-task-flow</description>
        <portlet-name>applications-task-flow</portlet-name>
        <display-name>applications-task-flow</display-name>
        <portlet-class>oracle.portlet.bridge.adf.application.ADFBridgePortlet</portlet-class>
        <init-param>
            <name>javax.portlet.faces.defaultViewId.view</name>
            <value>/adf.task-flow?adf.tfDoc=/WEB-INF/adfp-portlet-bridge-container.xml&adf.tfId=adfp-portlet-bridge-container&_fragmentTaskFlowDoc=/WEB-INF/applications-task-flow.xml&_fragmentTaskFlowId=applications-task-flow</value>
        </init-param>
        <supports>
            <mime-type>text/html</mime-type>
            <portlet-mode>VIEW</portlet-mode>
        </supports>
        <supported-locale>en</supported-locale>
        <portlet-info>
            <title>applications-task-flow</title>
            <short-title>applications-task-flow</short-title>
        </portlet-info>
        <container-runtime-option>
            <name>com.oracle.portlet.requireIFrame</name>
            <value>true</value>
        </container-runtime-option>
        <container-runtime-option>
            <name>com.oracle.portlet.minimumWsrpVersion</name>
            <value>2</value>
        </container-runtime-option>
    </portlet>
    <custom-portlet-mode>
        <portlet-mode>about</portlet-mode>
    </custom-portlet-mode>
    <custom-portlet-mode>
        <portlet-mode>config</portlet-mode>
    </custom-portlet-mode>
    <custom-portlet-mode>
        <portlet-mode>edit_defaults</portlet-mode>
    </custom-portlet-mode>
    <custom-portlet-mode>
        <portlet-mode>preview</portlet-mode>
    </custom-portlet-mode>
    <custom-portlet-mode>
        <portlet-mode>print</portlet-mode>
    </custom-portlet-mode>
</portlet-app> In all the 3 task flow there is at least one method activity placed either as the default activity or part of activities.
In service page taskflow the default activity is a method activity. If I convert the service-task-flow alone as a portlet, it failed. showing the similar error : pagedef not found.
Then I created the portlet out of car task-flow whose default activity is a page. This time I can view the portlet, the car list page. Once I click create button on that page which again goes through a method activity, then it failed showing the error mentioned above
It seems where ever there are method activities on the taskflow, the portlet cannot find the pagedef and its throwing error . I have cross checked the deployed war file and all the pagedef's are bundled into it.
Any suggestions are much appreciated.
Thanks,
Morgan.
Edited by: Morgan Freeman on Aug 19, 2011 3:27 AM
Edited by: Morgan Freeman on Aug 19, 2011 3:30 AM
Edited by: Morgan Freeman on Aug 19, 2011 6:02 AM

Hi All,
I solved this issue. The path of pagedef files was not recognized when I publish the taskflows as portlets. Though it runs when I place it as a region on jspx file.
The folder structure where I placed pagedefs earlier was some thing like this in ViewController -> Application Resources
com.mycomp.view.pagedefs
When I wanted to consume the portlet in the portal application, all the pagedefs under this path were not visible to the portlet.
Once I change the pagedef folder to the immediate folder after the Application Resources, it found all the pagedefs
Now my folder structure in ViewController -> Application Resources
view.pagedefs
Is this a bug? or Am I missing some thing.
Thanks,
Morgan.

Error *Form F110_PRENUM_CHCK is not active* - while Vendo payment by F-58

Dear Sir / Mam,
While possing vendor payment through F-58
an error "Form F110_PRENUM_CHCK is not active" is appearing
The document is geting saved but it doesn't get spooled.
I checked the configuration @ FBZP - Maintenance of company code data for payment method and confirmed that at form data sap script "F110_PRENUM_CHCK" is selected and saved.
Kindly guide, Ho do I activate F110_PRENUM_CHCK?
Regards
Chirag Shah
Edited by: CHIRAG SHAH on Jan 30, 2012 3:45 PM

Dear Sir,
I found the activate option, I executed it saved it and there after again when I am trying to process the payment....
Oops!
The problem still continues.
It still gives the same error that Form F110_PRENUM_CHCK is not active
Thanks & Regards
Chirag Shah

Error "Item 000010 does not exist" while creating sales order in VA01

Dear All,
As per customer requirement we are trying to validate shipping data( item level) and unloading point( item level) by customer enhancement.
Enhancement:       V45A0003
Function Module:    EXIT_SAPMV45A_003
INCLUDE:                ZXVVAU05
Inside include we have written validation code that if user enters any wrong value for shipping data or unloading data
system will throw error message accordingly.
It is working fine and we are getting error message if wrong shipping data or unloading data is entered.
But after the error message is displayed if we try to save the sales order again system throws a STOP message as a POPUP
saying "Item 000010 does not exist".
Now,if we enter proper shipping data or unloading data and try to save the salesorder it is throwing error "Item 000010 does not exist"..
Please let me know your valuable input on this.
Regards
Arindam
Edited by: Arindam Ganguly on Mar 11, 2010 1:55 PM

It sounds like your error routine has prevented the insertion of the data in VBAP or XVBAP internal tables. Therefore, upon return to the screen and SAVE, SAP is examining the VBAP or XVBAP table, comparing to the 'I' index table probably, and finding that there is supposed to be an item 10, but it's not in the necessary table(s).    This may be resulting because your internal tables are now inconsistent.
Look at where your inserted error coding is occurring...you may want to move that to the SAVE_DOCUMENT_PREPARE routine in MV45AFZZ, so that everything will have been built, and a final check of the content will stop the sales order save until the data is corrected.
Edited by: Breakpoint on Mar 11, 2010 3:29 PM

Error message BP does not exist while creating service order in WEB UI

Hi Experts,
i have an issue while creating a service order in WEB UI the system is automatically taking the BP ""created By"" but while saving the document Error message showing "BP does not exist"
we have already completed set up integration with HR .created the user as BP Role "employee"
Kindly suggest what are the other configuration that need to be checked.
Regards,
D Panda

Hi,
Have you made the assignment of the user (defaulting in created by) to the employee (under the identification tab in employee)?
Regards,
Parul

Error message " [RunQueryToServer] Job Not Found " while editing Schedules

Hi,
We are on BPC 7.5 NW. While trying to Edit Schedules in Datamanager , an error message is received " [RunQueryToServer] Job Not Found ". Could anyone suggest what could be the reason for the issue, is it admin rights of the user involved ?
Please do let me your suggestions.
Best Regards,
SAYAN

Message starting with Z is home made message. That means the message is designed by your organization only. You should consult with your ABAP team to check the root causes of the error message. If you know the debug process , then you can check it also by debugging. To get the details of the error message, go to SE91 and the enter class ZM and message no 303, then use the option 'where used list' to check the details used of the message.

Receive File Adapter - Error in CallSAPAdapter Name not known

Using xml to File Adapter. Just want to store the xml file somewhere ie on XI Server in folder E:\usr\sap\interface\XMLfiles
Getting error in Adapter Engine - Exception caught by adapter framework: Object not found in lookup of CallSAPAdapter.
Delivery of the message to the application using connection File_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: Object not found in lookup of CallSAPAdapter.: com.sap.engine.services.jndi.persistent.exceptions.NameNotFoundException: Object not found in lookup of CallSAPAdapter..
Receiver Adapter configured to receive file write a .tmp version no conversion so set type to Binary.
I can see the Communication Channel in the monitor green.
Any ideas to find the problem
thanks,

I tried changing the communication channel as suggested with no further success. I have viewed the LogViewer on the server in cluster->server->logs defaultTrace.trc and com.sap.xi -> xi.log with no more information available.
So is it that I cannot do a simple XML send to file receiver and leave its content unchanged?
My test message payload was of the order
<?xml version="1.0"?><LIST><S_STX><C_STDS><D_STDS1>... with all the data in.
Adapter type = file
Receiver
Transport Protocol = File System (NFS)
Message Protocol = File
Adapter Engine = Integration Server
Target Directory = E:/usr/sap/Interfaces/XMLFiles (and tried it with /usr/sap/interface/XMLFiles)
Create filedirectory = ticked
Filename filename.xml
File Construction Mode = add timestamp
Write Mode = use temporary file
Temporary filename scheme = filename.tmp
Filetype = Binary
Module Tab
1 localejbs/CallSAPAdapter Local Enterprise Bean 0
and thats it.
On testing from the Integration Engine it reaches the Adapter Engine and reports the error as stated in my first post.
The message data is of the construct
- <SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
- <SOAP:Header>
- <sap:Main xmlns:sap="http://sap.com/xi/XI/Message/30" versionMajor="3" versionMinor="0" SOAP:mustUnderstand="1" xmlns:wsu="http://www.docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" wsu:Id="wsuid-main-92ABE13F5C59AB7FE10000000A1551F7">
<sap:MessageClass>ApplicationMessage</sap:MessageClass>
<sap:ProcessingMode>asynchronous</sap:ProcessingMode>
<sap:MessageId>09c99665-f3cf-d247-993b-8cb46c37d820</sap:MessageId>
<sap:TimeSent>2007-09-19T16:42:31Z</sap:TimeSent>
- <sap:Sender>
<sap:Party agency="http://sap.com/xi/XI" scheme="XIParty">AS2</sap:Party>
<sap:Service>XMLFILE</sap:Service>
</sap:Sender>
- <sap:Receiver>
<sap:Party agency="http://sap.com/xi/XI" scheme="XIParty">MyCompany</sap:Party>
<sap:Service>XMLFILE</sap:Service>
</sap:Receiver>
<sap:Interface namespace="http://warburtons.com/genhdr">MI_XMLFILE_V3</sap:Interface>
</sap:Main>
- <sap:ReliableMessaging xmlns:sap="http://sap.com/xi/XI/Message/30" SOAP:mustUnderstand="1">
<sap:QualityOfService>ExactlyOnce</sap:QualityOfService>
</sap:ReliableMessaging>
- <sap:Diagnostic xmlns:sap="http://sap.com/xi/XI/Message/30" SOAP:mustUnderstand="1">
<sap:TraceLevel>Information</sap:TraceLevel>
<sap:Logging>Off</sap:Logging>
</sap:Diagnostic>
- <sap:HopList xmlns:sap="http://sap.com/xi/XI/Message/30" SOAP:mustUnderstand="1">
- <sap:Hop timeStamp="2007-09-19T16:42:31Z" wasRead="false">
<sap:Engine type="IS">is.00.srvsapxidev</sap:Engine>
<sap:Adapter namespace="http://sap.com/xi/XI/System">XI</sap:Adapter>
<sap:MessageId>09c99665-f3cf-d247-993b-8cb46c37d820</sap:MessageId>
- <sap:Branch>
<sap:MessageId>707ecbbd-a474-514d-b731-f4003c38c4df</sap:MessageId>
<sap:Party agency="http://sap.com/xi/XI" scheme="XIParty">ASD</sap:Party>
<sap:Service>IP_I_XMLFILE_Collect</sap:Service>
</sap:Branch>
- <sap:Branch>
<sap:MessageId>09c99665-f3cf-d247-993b-8cb46c37d820</sap:MessageId>
<sap:Party agency="http://sap.com/xi/XI" scheme="XIParty">MyCompany</sap:Party>
<sap:Service>XMLFILE</sap:Service>
</sap:Branch>
<sap:Info>3.0</sap:Info>
</sap:Hop>
- <sap:Hop timeStamp="2007-09-19T16:44:56Z" wasRead="false">
<sap:Engine type="AE">af.xid.srvsapxidev</sap:Engine>
<sap:Adapter namespace="http://sap.com/xi/XI/System">XIRA</sap:Adapter>
<sap:MessageId>09c99665-f3cf-d247-993b-8cb46c37d820</sap:MessageId>
</sap:Hop>
</sap:HopList>
</SOAP:Header>
- <SOAP:Body>
- <sap:Manifest xmlns:sap="http://sap.com/xi/XI/Message/30" xmlns:xlink="http://www.w3.org/1999/xlink" xmlns:wsu="http://www.docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" wsu:Id="wsuid-manifest-5CABE13F5C59AB7FE10000000A1551F7">
- <sap:Payload xlink:type="simple" xlink:href="cid:[email protected]">
<sap:Name>PayloadName</sap:Name>
<sap:Description>PayloadDescription</sap:Description>
<sap:Type>Application</sap:Type>
</sap:Payload>
</sap:Manifest>
</SOAP:Body>
</SOAP:Envelope>
The Payload is
<?xml version="1.0" ?>
- <LIST>
etc
Message status
2007-09-19 17:44:56 Success Message successfully received by messaging system. Profile: XI URL: http://srvsapxidev:50000/MessagingSystem/receive/AFW/XI Credential (User): XIISUSER
2007-09-19 17:44:56 Success Using connection File_http://sap.com/xi/XI/System. Trying to put the message into the receive queue.
2007-09-19 17:44:56 Success Message successfully put into the queue.
2007-09-19 17:44:56 Success The message was successfully retrieved from the receive queue.
2007-09-19 17:44:56 Success The message status set to DLNG.
2007-09-19 17:44:56 Success Delivering to channel: CC_toMyCompany_XMLFILE
2007-09-19 17:44:56 Error Exception caught by adapter framework: Object not found in lookup of CallSAPAdapter.
2007-09-19 17:44:56 Error Delivery of the message to the application using connection File_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: Object not found in lookup of CallSAPAdapter.: com.sap.engine.services.jndi.persistent.exceptions.NameNotFoundException: Object not found in lookup of CallSAPAdapter..
2007-09-19 17:44:56 Success The asynchronous message was successfully scheduled to be delivered at Wed Sep 19 17:49:56 BST 2007.
2007-09-19 17:44:56 Success The message status set to WAIT.
Now I have been reading all the documentation available and forum questions in this area but there is a lot of information but not quite for what I am currently trying to do. I need to preserve the xml file as xml for further processing. This is just a resting place for the file as I am trying to cut down a long running (over a day) collect BPM scenario by collecting the files in the directory then triggering the collect scenario to read in the files from this directory and perform all the processing and mapping in one chunk of short time. (But that is another story)
Any more suggestions appreciated could the SAPCallAdapter not be where I think it is? Does my directory and filename case have to be exact lower and upper case. (I will test this tomorrow)...and let you know if any difference and continue to read the links put on by the other person who answered.
thanks,

ERROR: Basis Start Release not known in putGenSubstNamePuttb()

Solman 3.2 to 4.0 upgrade.
Getting this error immediately after starting Upgrade with SAPup. Prepare finished successfully however!
Using latest version of SAPup together with the Upgrade "Fixes'.
NOTE: I am only using Basis SP11 since SP12 was not available for download and was recommended by prepare. Not totally sure if this is the problem though.
any thoughts are appreciated.
Linwood

Hello Linwood,
The best solution is to reset the upgrade. Which phase are you in now?
Regards,
Joe

Error : 'Tax Jurisdiction is not determined' while creating sales order

Hi,
I'm creating a sales order using the BAPI : BAPI_SALESORDER_CREATEFROMDAT1.
I'm passing the following values in ORDER_HEADER_IN parameter:
doc_type,sales_org,distr_chan,division,po_method,sales_off,req_date_h,data_type,purch_no,purch_date,price_date.
I'm passing the following values in SD_ORDER_PARTNERS:
partn_role,partn_numb,name,langu,region,country.
The following fields are passed in SD_ORDER_ITEMS:
material,req_qty,sales_unit,store_loc (space is passed for st.loc),req_date,po_method,req_date,plant.
CALL FUNCTION 'BAPI_SALESORDER_CREATEFROMDAT1'
    EXPORTING
      order_header_in = sd_order_header
    IMPORTING
      return          = return1
      salesdocument   = order_number
      sold_to_party   = sd_sold_to_party
      ship_to_party   = sd_ship_to_party
      billing_party   = sd_billing_party
    TABLES
      order_items_in = sd_order_items_in
      order_partners = sd_order_partners
      order_items_out = sd_order_items_out.
The system returns a message in RETURN1 saying that : 'Tax jurisdiction is not determined'.
Please let me know if I'm missing something.
Thanks,
Narsingh.

Do you want to use the customer master address for the ship-to? Does the ship-to on the customer master haver a tax jurisdiction determined? Did you change the values in region/country from what they are on the customer master which would cause the tax jurisdiction determined on the customer master to be re-determined and thus rejected? You don't need to send address values in the partner table if you intend to use the customer master values...

Error - Batch definition level not known while UD

Similar Messages

Maybe you are looking for