Error : Batch definition level not known

hello,
Any body know how to resolve this error.
Some transaction gives this Error.
First i was Copied a new Client In IDES for source client 800.
User Profile is SAP_ALL & SAP_NEW in both client 800 & new 910 but 910 shows such error.
Also during copy process it shows deleted lines 4
Is it due to deleted lines?

Hi Canan,
Kindly advise.
In OMCT
Batch level - Batch unique at plant level
Batch status management - Inactive.
Regards,
Raghunandan

Similar Messages

Error - Batch definition level not known while UD

Hi Experts,
Please help on below Issue
For Inspectio type 10. After result recording when we do Usage Decision,
Showing Message :-
"Batch definition level not known.inconsistency!"
Regards,
Raghunandan

Hi Canan,
Kindly advise.
In OMCT
Batch level - Batch unique at plant level
Batch status management - Inactive.
Regards,
Raghunandan

Batch definition level not known System inconsistency

Hi gurus,
When I create a new material via trcode MM01 the Error message displays:"Batch definition level not known System inconsistency"
How can I correct the error?
Thanks&Regards

Hi,
Are you trying to set the batch flag at the same time?
If so you need to set the configuration for batch management to indicate if batches are to be unique at the plant level etc.
SPRO Logistics General > Batch management > specify batch level and activate status management
Steve B

Getting error u201CWorkflow definition 'WS04200009' not in version '0000'u201D

Hi all,
I have a requirement where I have to use/ enhance the standard HR workflow template WS04200009 for leave approval.
The problem is when I click on Workflow Builder in PFTC, its giving the following error :-
u201CWorkflow definition 'WS04200009' not in version '0000'u201D.
SAP has given details for this error like this:-
u201CWorkflow definition 'WS04200009' not in version '0000'
Message no. WD401
Diagnosis
The workflow definition with the ID WS04200009 in version 0000 could not be read from the database.
System Response
The call to the Workflow Builder had to be cancelled.
Procedure
Refer to your workflow system administrator.u201D
Secondly, I tried to copy this standard workflow template to a custom one.
But here also, its copying only the Workflow Container elements, workflow template is not coming.
Please guide me what can be the solution.
Regards
Navjot Singh.

Hi Navjot.
We faced the same issue, and need to apply the OSS note - 962488. (Recommended by SAP). After applying the note you need to execute the FM - SWD_WFD_REPLICATE_FROM_9999 input parameter as the workflow ID which is missing.
Hope this will be helpful for you. All the best.
- Mohan Vamsi

Error : Workflow definition does not exits(T-code : SWU7 )

Hi All,
I checked my workflow template in SWU7 .Its gives me error "Workflow definition does not exits".
In the bottom left of screen it displays message : "Container Element ZBUS2081 is not used".
How can remove this error ? Please help..

Hi ,
The method used is standarad "GETEMAILDATA".
no changes have been done to this.
In bindings(exist)
Workflow Step 'Get data from Email'
&INCOMINGINVOICE.PAYMENTBLOCK& &PAYMENTBLOCK&
Then in Containers tab{ other tabs include basic data,description,triggering events,terminating events,defualt values,sapphone)
this expression have been defined :
abap dict. refernce : RBKP-ZLSPR
PROPERTIES : IMPORT,EXPORT and MANDATORY.
The BO name is ZBUS2081
For BOR ZBUS2081
bus2081.PaymentBlock datatype refernce : RBKP-ZLSPR
method defined :bus2081.BlockedPriceCheck
Kindly check if fine.
Edited by: ujjwal dharmak on Nov 22, 2010 9:14 PM

CRM error: Data target BPMKT; not known

Hi,
I m working on Loyalty Points Mgmt. which is combination of CRM & BW. I have created a Analysis Process Designer (RSANWB) Here source is Query & Target is CRM Attributes, In CRM attributes I have selected Data Target : BPMKT "Marketing attributes for business partner segmentation". When I am going to active this the system shows "CRM error : Data target BPMKT not known".
Anyone could help me. Where I am wrong...? How could I correct this Error.
Thanx in Advance.
Regards
Manoj Kulkarni

Hi Rogier, I got same problem.
How to resolved it?
Regards.
Enrique.

Receive File Adapter - Error in CallSAPAdapter Name not known

Using xml to File Adapter. Just want to store the xml file somewhere ie on XI Server in folder E:\usr\sap\interface\XMLfiles
Getting error in Adapter Engine - Exception caught by adapter framework: Object not found in lookup of CallSAPAdapter.
Delivery of the message to the application using connection File_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: Object not found in lookup of CallSAPAdapter.: com.sap.engine.services.jndi.persistent.exceptions.NameNotFoundException: Object not found in lookup of CallSAPAdapter..
Receiver Adapter configured to receive file write a .tmp version no conversion so set type to Binary.
I can see the Communication Channel in the monitor green.
Any ideas to find the problem
thanks,

I tried changing the communication channel as suggested with no further success. I have viewed the LogViewer on the server in cluster->server->logs defaultTrace.trc and com.sap.xi -> xi.log with no more information available.
So is it that I cannot do a simple XML send to file receiver and leave its content unchanged?
My test message payload was of the order
<?xml version="1.0"?><LIST><S_STX><C_STDS><D_STDS1>... with all the data in.
Adapter type = file
Receiver
Transport Protocol = File System (NFS)
Message Protocol = File
Adapter Engine = Integration Server
Target Directory = E:/usr/sap/Interfaces/XMLFiles (and tried it with /usr/sap/interface/XMLFiles)
Create filedirectory = ticked
Filename filename.xml
File Construction Mode = add timestamp
Write Mode = use temporary file
Temporary filename scheme = filename.tmp
Filetype = Binary
Module Tab
1 localejbs/CallSAPAdapter Local Enterprise Bean 0
and thats it.
On testing from the Integration Engine it reaches the Adapter Engine and reports the error as stated in my first post.
The message data is of the construct
- <SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
- <SOAP:Header>
- <sap:Main xmlns:sap="http://sap.com/xi/XI/Message/30" versionMajor="3" versionMinor="0" SOAP:mustUnderstand="1" xmlns:wsu="http://www.docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" wsu:Id="wsuid-main-92ABE13F5C59AB7FE10000000A1551F7">
<sap:MessageClass>ApplicationMessage</sap:MessageClass>
<sap:ProcessingMode>asynchronous</sap:ProcessingMode>
<sap:MessageId>09c99665-f3cf-d247-993b-8cb46c37d820</sap:MessageId>
<sap:TimeSent>2007-09-19T16:42:31Z</sap:TimeSent>
- <sap:Sender>
<sap:Party agency="http://sap.com/xi/XI" scheme="XIParty">AS2</sap:Party>
<sap:Service>XMLFILE</sap:Service>
</sap:Sender>
- <sap:Receiver>
<sap:Party agency="http://sap.com/xi/XI" scheme="XIParty">MyCompany</sap:Party>
<sap:Service>XMLFILE</sap:Service>
</sap:Receiver>
<sap:Interface namespace="http://warburtons.com/genhdr">MI_XMLFILE_V3</sap:Interface>
</sap:Main>
- <sap:ReliableMessaging xmlns:sap="http://sap.com/xi/XI/Message/30" SOAP:mustUnderstand="1">
<sap:QualityOfService>ExactlyOnce</sap:QualityOfService>
</sap:ReliableMessaging>
- <sap:Diagnostic xmlns:sap="http://sap.com/xi/XI/Message/30" SOAP:mustUnderstand="1">
<sap:TraceLevel>Information</sap:TraceLevel>
<sap:Logging>Off</sap:Logging>
</sap:Diagnostic>
- <sap:HopList xmlns:sap="http://sap.com/xi/XI/Message/30" SOAP:mustUnderstand="1">
- <sap:Hop timeStamp="2007-09-19T16:42:31Z" wasRead="false">
<sap:Engine type="IS">is.00.srvsapxidev</sap:Engine>
<sap:Adapter namespace="http://sap.com/xi/XI/System">XI</sap:Adapter>
<sap:MessageId>09c99665-f3cf-d247-993b-8cb46c37d820</sap:MessageId>
- <sap:Branch>
<sap:MessageId>707ecbbd-a474-514d-b731-f4003c38c4df</sap:MessageId>
<sap:Party agency="http://sap.com/xi/XI" scheme="XIParty">ASD</sap:Party>
<sap:Service>IP_I_XMLFILE_Collect</sap:Service>
</sap:Branch>
- <sap:Branch>
<sap:MessageId>09c99665-f3cf-d247-993b-8cb46c37d820</sap:MessageId>
<sap:Party agency="http://sap.com/xi/XI" scheme="XIParty">MyCompany</sap:Party>
<sap:Service>XMLFILE</sap:Service>
</sap:Branch>
<sap:Info>3.0</sap:Info>
</sap:Hop>
- <sap:Hop timeStamp="2007-09-19T16:44:56Z" wasRead="false">
<sap:Engine type="AE">af.xid.srvsapxidev</sap:Engine>
<sap:Adapter namespace="http://sap.com/xi/XI/System">XIRA</sap:Adapter>
<sap:MessageId>09c99665-f3cf-d247-993b-8cb46c37d820</sap:MessageId>
</sap:Hop>
</sap:HopList>
</SOAP:Header>
- <SOAP:Body>
- <sap:Manifest xmlns:sap="http://sap.com/xi/XI/Message/30" xmlns:xlink="http://www.w3.org/1999/xlink" xmlns:wsu="http://www.docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" wsu:Id="wsuid-manifest-5CABE13F5C59AB7FE10000000A1551F7">
- <sap:Payload xlink:type="simple" xlink:href="cid:[email protected]">
<sap:Name>PayloadName</sap:Name>
<sap:Description>PayloadDescription</sap:Description>
<sap:Type>Application</sap:Type>
</sap:Payload>
</sap:Manifest>
</SOAP:Body>
</SOAP:Envelope>
The Payload is
<?xml version="1.0" ?>
- <LIST>
etc
Message status
2007-09-19 17:44:56 Success Message successfully received by messaging system. Profile: XI URL: http://srvsapxidev:50000/MessagingSystem/receive/AFW/XI Credential (User): XIISUSER
2007-09-19 17:44:56 Success Using connection File_http://sap.com/xi/XI/System. Trying to put the message into the receive queue.
2007-09-19 17:44:56 Success Message successfully put into the queue.
2007-09-19 17:44:56 Success The message was successfully retrieved from the receive queue.
2007-09-19 17:44:56 Success The message status set to DLNG.
2007-09-19 17:44:56 Success Delivering to channel: CC_toMyCompany_XMLFILE
2007-09-19 17:44:56 Error Exception caught by adapter framework: Object not found in lookup of CallSAPAdapter.
2007-09-19 17:44:56 Error Delivery of the message to the application using connection File_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: Object not found in lookup of CallSAPAdapter.: com.sap.engine.services.jndi.persistent.exceptions.NameNotFoundException: Object not found in lookup of CallSAPAdapter..
2007-09-19 17:44:56 Success The asynchronous message was successfully scheduled to be delivered at Wed Sep 19 17:49:56 BST 2007.
2007-09-19 17:44:56 Success The message status set to WAIT.
Now I have been reading all the documentation available and forum questions in this area but there is a lot of information but not quite for what I am currently trying to do. I need to preserve the xml file as xml for further processing. This is just a resting place for the file as I am trying to cut down a long running (over a day) collect BPM scenario by collecting the files in the directory then triggering the collect scenario to read in the files from this directory and perform all the processing and mapping in one chunk of short time. (But that is another story)
Any more suggestions appreciated could the SAPCallAdapter not be where I think it is? Does my directory and filename case have to be exact lower and upper case. (I will test this tomorrow)...and let you know if any difference and continue to read the links put on by the other person who answered.
thanks,

ERROR: Basis Start Release not known in putGenSubstNamePuttb()

Solman 3.2 to 4.0 upgrade.
Getting this error immediately after starting Upgrade with SAPup. Prepare finished successfully however!
Using latest version of SAPup together with the Upgrade "Fixes'.
NOTE: I am only using Basis SP11 since SP12 was not available for download and was recommended by prepare. Not totally sure if this is the problem though.
any thoughts are appreciated.
Linwood

Hello Linwood,
The best solution is to reset the upgrade. Which phase are you in now?
Regards,
Joe

Field name is not known Error in formula field...

Hi,
I have a report in CR11.5 r2 that I call from VB6.
The report works fine, until a I create this formula, Trim ({RSE.PatName}).
When I put this formula field in a section in the report, I have this error, "Field name is not known Error".
Any idea?

Make sure you have SP 6:
https://smpdl.sap-ag.de/~sapidp/012002523100015859952009E/crxir2win_sp6.exe
Does the formula work in the designer?
Are you changing datasource at runtime? If so, can you change to that datasource in the designer and run the report there?
If you do not use the Trim function, does it work?
If you do not use the field in a formula abd place it in say, the detail section as a test, does the report work?
But remember that what ever the report is doing at runtime, must work in the designer 1st.
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup

Customer , vendor 0000049256 not known (EDI process)

We are trying to send an IDoc type INVOIC from one SAP R/3 system to
another using the SAP XI/PI.
Right now we are experience an error Customer , vendor 0000049256 not
known, after have check all ALE/EDI configuration between the source
system (SAP R/3 4.6B), the middleware (SAP XI/PI 7.0) and the receiver
system (SAP R/3 4.6B with IS-OIL) we still dont find the solution.
We applied the note 117814, with the following code (file attach).
Source (SD module sends an IDoc type INVOIC) SAP R/3 4.6B
BASIS 53
ABAP 53
APPL 53
Middleware (SAP XI/PI 7.0)
BASIS 12
ABAP 12
Target (MM module receives an IDoc type INVOIC) SAP R/3 4.6B
BASIS 38
ABAP 38
APPL 37
IS-OIL 37
Can someone help us?
Thanks in advance
Un Saludo/Regards/Mit freundlichen Grüssen,
João Paulo Reis
Accenture SI SAP - Technology
Edificio Accenture
C/Ramírez de Arellano, 35
Madrid - Spain 28043
T: +34 915966000
F: +34 91 596 6695
Mobile : + 34 606432447

Hello Joao,
Check your logical system which represent the R/3 did you Configured the Customer Distribution Model correctly?Do an initial check for ports,partner profile and inbound/outbound parameters.
Regards,
jafer

Regarding the Workflow definition 'WS10000051' not in version '0001'

Hi,
iam using the worklow template WS10000051 and when try to view the workflow builder it 's giving error " Workflow definition 'WS10000051' not in version '0001"
please let me know the solution!!
it's very urgent!!
thanks
ram

Prasath Natesan wrote:Did u check the URL provided by me in the previous post. Below is one of the responses in that thread!
>
>Are you in ECC 6.0? check note 981295 and the below message.
>
>incomplete / missing workflow on ECC 6.0
>
>Thanks,
>Prasath N
Check this note and also check out various other options provided by others.
Thanks,
Prasath N

Batch determination is not possible because there is no search procedure

Hello Friends,
In Consignment issue delivery document facing error 'Batch determination is not possible because there is no search procedure",please tellm ehow to resolve this.
regards,
Nitin M.Pawar

In IMG > Logistics - General > Batch Management > Batch Determination and Batch Check > Batch Search Procedure Allocation and Check Activation > Allocate SD Search Procedure/Activate Check.
Here maintain the config as per the system requirements.
Best Regards,
Ankur

BPM_DATA_COLLECTION fails with (Output device "" not known) error

Hi all,
I have an issue with Output BPM_DATA_COLLECTION_1 job in the satellite system failing with 'Output device "" not known error. Since it is collecting data for Solution Manager system why does is it trying to find an output device.
It did not fail before and now I added another key figure (custom one) which is done the same way the other custom monitors are done in "Z_BPM_ECU_COLLECTOR" report and then in /SSA/EXM program, but the collector job started to fail.
Also, for some reason there are two BPM_DATA_COLLECTION jobs, one is BPM_DATA_COLLECTION_1 and the other is BPM_DATA_COLLECTION_2. _1 runs every 5 min and _2 is less frequent. They both seem to runt the same job which is /SSA/EXS. Why are there two jobs scheduled from solution manager in my satellite system?
Thank you very much for your help!

I am experiencing this same issue in our ECC 6.0 system. We currently have ST-A/PI release 01M_ECC600 level 0001 applied to our system. These jobs finish successfully in SM37, but I'm seeing the same error messages in our system logs (SM21).
When I try to update the output device that is associated with these jobs, the user ID running the jobs is not valid since it's user type is Communication Data.
Does anyone know if it ok to change the user for this job? Should it be run by DDIC? I believe the jobs were created automatically when we applied ST-A/PI release 01M_ECC600 level 0001.

Error in Trace Level: could not create BPE proxy for message, no XML objec

Hi
We are doing a scenario of File to RFC using BPM and I am getting this errror in Tcode SXMB_MONI.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>

<SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="BPE_ADAPTER">UNKNOWN_MESSAGE</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>No object type found for this message; check the activation of the corresponding process</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
And getting this error in Trace level
could not create BPE proxy for message, no XML object definition found for message EB32BB50610A11DC9648001321CB837D
Why this error occurs?
What could be in error?
Thanks in advance
Regards
Sami Qureshi

Hi Sami,
Check if thse threads can help u,
Error in BPE Adapter
BPM - BPE_ADAPTER errors
BPE Adapter Error
Exeception during execution error
***********Reward points if helpfull************

I'm trying to use import com.adobe.crypto.* on Windows version of my App but get error 1172:Definition com.adobe.crypto could not be found

The Mac version of my Air app works fine, so does the iPad version, but the PC version has been a bit of a nightmare.
I keep getting the error "1172:Definition com.adobe.crypto could not be found", when I publish it.
Basically the 'com' folder is in the same directory as the app I am publishing and within that is 'adobe' and within that is 'crypto' within that is a series of .as files.
I've added C:\Users\Gary\Documents\My_Applications\My_App_folder\com\adobe\crypto to source path list (I have no idea if that's right).
But that just gives me a different error 5001: The name of package com.adobe.crypto does not reflect the location of this file. Please change the package definitions name inside the file.......
I didn't have to include this source in the Mac version... but someone seemed to suggest it on a forum.
I'm basically stabbing in the dark at the mount, something I seem to be doing a lot of these days. :-(
Any help would be greatly appreciated.
Many Thanks
Gary

I've figured it out
Turns out I needed to add a source path (in the Actionscript 3 settings click on the Source File Tab) that exactly matches the directory the app and com folder is inside of. I wrongly assumed that Adobe Air could figure out where it was for itself, but no.... it needs to be told where to look for the com folder even though it's staring it right in its face. (Don't set the path to the 'com' folder itself, but to the enclosing folder that the .fla and the com is in).
The Mac version doesn't seem to need that, it just finds the com folder if it's inside the same folder.
Now I've got another massive error:-
When I test the app, it works fine sending to Air for Desktop, however when I publish with embedded runtime for Windows.... It comes up with this error.
Any ideas ?

Error : Batch definition level not known

Similar Messages

Maybe you are looking for