Error : batch program

Hi :
I had created a bdc program using call transcation.When i execute in mode 'A',im selecting a record from my ALV list and creating a process order.
but when i execute in mode 'N', it says "no records are seelcted', since im not selecting any record from the ALV .
My recording did not show any field for selecting the record in the batch program, how can i select a particular record from ALV list and execute it mode N'.
Thx .
Rah

Hello,
do you want to process all entries of your alv list or only one entry? How do you know in background task which entry you want to process ?
You can check for batch mode (sy-batch = 'X') and display the alv only in online version. for background task you loop over your alv output table to fill your bdc structure and then process call transaction.
regards sven

Similar Messages

(SCM-APO ) - LiveCache error - tp error : operable program or batch file

Dear Gurus,
On one our APO systems, I cannot administer liveCache, using database connection LCA, LDA, or LEA. Using LCA as an example, with
tcode LC10> liveCache Monitoring, I get this error:
Name and Server :    QDP - ntsapsc001
DBMRFC Function : DBM_CONNECT
Error : DBM Error
Return Code : -11
Error Message : tp error: operable program or batch file
Using tcode /sapapo/om13, I get these results:
liveCache connection to LCA      (GREEN)
liveCache Stat. from LCA     ???    (RED)
liveCache Initialization          001   (RED)
Using tcode SE38> program RSLVCINIT > database connection LCA, I get this error:
Error in DBMSERVER or DBMCLI
What is wrong ?
Thanks and regards,
cjperk90

In the syslog (tcode sm21), and on the NT server's syslog,
I also get these errors:
Database error -10709 at CON
> Connection failed (RTE:database not running)
Please advise.
Thanks,
cjperk90

Middleware Services - CRM Batch Program that will auto-reprocess Bdoc error

Hi Experts,
I would like to find out the SAP CRM batch program that can be use to auto-reprocess BDOCs errors. Any ideas?
Thanks alot~!

Look at the transactions
SMW20 & transaction SMW3WD.
You might be able to schedule those.
Take care,
Stephen

BDC error in program

Running one BDC in that one condition has given if that condition is not satisfy then raise one Error message. For example i am running that BDC with 10 records.
First 3 records run successfully but at the 4th record it gives error then program is stocking there only. Not running the remaining records and not show successful records log as per the coding. Its not even going back also.
Running one BDC in that its calling transaction In that transaction one user-exit in that its calls sub screen in that exit one condition has given if that condition is not satisfy then raise one Error message.
For example I am running that BDC with 5 records.
First 2 records run successfully but at the 4th record it give error then program is stocking where subscreen calls and error message popup come if click cancel button at popup and sub screen it going to transaction if I click back button then again it comes to error popup screen.its not going out of the error popup and transaction loop.How to rectify this.

what time of error message are you running, by that I mean what type?
is the error popping up the screen? and if it does then are you running your batch process in the foreground? If you are, try running it in the background.
Warren

Syntax Error in program "/BDL/SAPLBDL11"

Hi,
I have installed ST-PI and ST-A/PI Add-ons with latest Support Patches in our BI7.01 environment. after that i have configured SDCCN successfully in Development environment but when i am trying to configure SDCCN in Quality environment, i am getting Syntax_Error for program /BDL/SAPLBDL11. Due to this error i am not able to create SDCC_OSS RFC also not able to activate batch jobs /BDL/TASK_PROCESSOR.
Following is the brief detail of error.
===================================================================================
                                                                    SYNTAX_ERROR
Short text
    Syntax error in program "/1BCDWBEN/SAPL/BDL/EN0000 ".
What happened?
    Error in the ABAP Application Program
    The current ABAP program "/BDL/SAPLBDL11" had to be terminated because it has
    come across a statement that unfortunately cannot be executed.
    The following syntax error occurred in program "/1BCDWBEN/SAPL/BDL/EN0000 " in
     include "/1BCDWBEN/L/BDL/EN0000U01 " in
    line 41:
    "Field "ALL_" is unknown. It is neither in one of the specified tables "
    "nor defined by a "DATA" statement. "DATA" statement."
    The include has been created and last changed by:
    Created by: "DDIC "
    Last changed by: "DDIC "
    Error in the ABAP Application Program
    The current ABAP program "/BDL/SAPLBDL11" had to be terminated because it has
    come across a statement that unfortunately cannot be executed.
========================================================================================
Thanking you
Regards
Pranav

Dear Pranav
I think you have done the upgradation to EHP3 , In order to Fix this issue would you please try to activated the lock object /ISDFPS/EALESYS   , ENQUEUE_/ISDFPS/EALESYS and DEQUEUE_/ISDFPS/EALESYS   in transaction SE11
I am sure this will fix that issue.
Best Regards
Jai Wardhan

Do you have any problem in KE21N batch programs

Hi,
Do you have any problem in KE21N batch programs?
Thanks.
deniz.

No, but look at OSS [Note 897659 - Error KE 093 when running batch input sessions|https://service.sap.com/sap/support/notes/897659] or give more informations.
Regards

Running a batch program

Hi,
I would like to run a batch program from a java class. plz advise me how to do it. Thanks in advance

hi ,
I tried this exact piece of code for running a bat file but it didn't work, only exes worked!!!
I got:
Exceptionjava.io.IOException: CreateProcess: c:\WINNT\system32\RemoteSend.bat error=2
Any suggestions why this happens!!!!
noha

SYNTAX_ERROR unable to log in to SAP system Syntax error in program "SAPMSE

hi SAP Experts,
I have applied Basis patch 12 and I scheduled the background. Backgroud job was terminated. System became slow. Then I stopped the server and restarted. Now, I am unable to log in to SAP GUI by entering Username and Password and getting syntax error.
Syntax error in program "SAPMSEM1".
What happened?
Error in the ABAP Application Program
The current ABAP program '????????????????????????????"
terminated because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occured in program "SAPMSEM1" in include
"CL_SALV_FORM_ELEMET==========CU" in
line 13:
"the type "IF_SALV_FORM_CONFIG" is unknown."
The include has been created and last changed by:
Created by: "SAP "
Last Changed by: "SAP "
I am unable to access any transction code.
Please help me..
Thanks in advance...
Raju

hi,
Thanks for your response.
i haven't take any back up. can u pls tell me step by step procedure to implement the SP with TP.
your answer will be helpful..
Regards
Raju

Unable to login in the system ---- Syntex Error is Program SAPLSFES

Hi,
We have Sol_Man 7(N/W 700) in Win2003 and MSSQL 2005.
During Support pack SAPKB70014 application in our Soloution Manager, I have continued all the step in Dialog but today it shows a message that "Inform SAP system for tp termination".The SP application was running for almost 12-14hrs.
Then I restart my SAP system.Now when I opening SAP GUI
Message is comming
ABAP Runtime Error   Error Code <no erorr name or code was mentioned >
In bottom of the page messege is comming
" Syntex Error is Program SAPLSFES "
Login name & password not asking.
I also found in the Slog that
"WARNING:       Background job RDDIMPDP could not be started or terminated abnormally."
In SAPIB70014
2EETW000 sap_dext called with msgnr "1":
2EETW000 -
db call info -
2EETW000 function:   db_xrtab
2EETW000 fcode:      RT_MI_LOAD
2EETW000 tabname:    SPROXHDR
2EETW000 len (char): 1740
2EETW000 key:        CLASCX_SERVICES_REGISTRY_SIPUBLIS8 CLASCX_SERVICES_REGISTRY_SIPUBLIS82F7E61BA8717B7CD295188A843F6CB8E97F12D39
2EETW000 retcode:    1
2EETW125 SQL error "1105" during "" access: "[1105] Could not allocate space for object 'dbo.SPROXHDR'.'SPROXHDR~HAS' in database 'SM1' because the 'PRIMARY' filegroup is full. Create disk space by deleting unneeded files, dropping objects in the filegroup, adding additional files to the filegroup, or setting autogrowth on for existing files in the filegroup."
I also checked and found that TRBAT table contains only header information where as TRJOB table is empty.
Also found tp.exe in Task Manager.
I have already created a message with SAP.
Please guide me in this regard.
Regards,
Partha

WARNING: Background job RDDIMPDP could not be started or terminated abnormally."
login into Client 000 and schedule the background job again.
Could not allocate space for object 'dbo.SPROXHDR'.'SPROXHDR~HAS' in database 'SM1' because the 'PRIMARY' filegroup is full. Create disk space by deleting unneeded files, dropping objects in the filegroup, adding additional files to the filegroup, or setting autogrowth on for existing files in the filegroup."
Check the database space also. i think there is some space problem also, you need to add some space or need to add datafile.
Regards,
Subhash

Syntax error in program "SAPLXRSA " -SENT

Hi Guys,
I have done user exit in R/3 datasource when I do the test extraction using RSA3 and geting the data without any error. I've transport the requet to Test Box and tried to do the extraction in TestBox and getting the below SYNTAX Error message. Kindly advise it's very URGET. Thanks in advance.
ShrtText
Syntax error in program "SAPLXRSA ".
What happened?
Error in ABAP application program.
The current ABAP program "SAPLRSAP" had to be terminated because one of the
statements could not be executed.
This is probably due to an error in the ABAP program.
In program "SAPLXRSA ", the following syntax error occurred
in the Include "ZXRSAU01 " in line 21:
"Field "ZOXPRO0043" is unknown. It is neither in one of the specified t"
"ables nor defined by a "DATA" statement. "DATA" statement."
Author and last person to change the Include are:
Author "SAPCHEOLENG "
Last changed by "CCEV200 "
What can you do?
Please eliminate the error by performing a syntax check
(or an extended program check) on the program "SAPLXRSA ".
You can also perform the syntax check from the ABAP/4 Editor.
If the problem persists, proceed as follows:
Print out the error message (using the "Print" function)
and make a note of the actions and input that caused the
error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
is especially useful if you want to keep a particular message.
Error analysis
In program "SAPLXRSA ", the following syntax error occurred:
"Field "ZOXPRO0043" is unknown. It is neither in one of the specified t"
"ables nor defined by a "DATA" statement. "DATA" statement."
How to correct the error
Probably the only way to eliminate the error is to correct the program.
If you cannot solve the problem yourself and you wish to send
an error message to SAP, include the following documents:
1. A printout of the problem description (short dump)
To obtain this, select in the current display "System->List->
Save->Local File (unconverted)".
2. A suitable printout of the system log
To obtain this, call the system log through transaction SM21.
Limit the time interval to 10 minutes before and 5 minutes
after the short dump. In the display, then select the function
"System->List->Save->Local File (unconverted)".
3. If the programs are your own programs or modified SAP programs,
supply the source code.
To do this, select the Editor function "Further Utilities->
Upload/Download->Download".
4. Details regarding the conditions under which the error occurred
or which actions and input led to the error.
System environment
SAP Release.............. "640"
Application server....... "hawk"
Network address.......... "137.132.12.22"
Operating system......... "HP-UX"
Release.................. "B.11.23"
Hardware type............ "ia64"
Character length......... 8 Bits
Pointer length........... 64 Bits
Work process number...... 0
Short dump setting....... "full"
Database server.......... "hawk"
Database type............ "ORACLE"
Database name............ "QAS"
Database owner........... "SAPR3"
Character set............ "en_US.iso88591"
SAP kernel............... "640"
Created on............... "Oct 16 2006 20:35:55"
Created in............... "HP-UX B.11.23 U ia64"
Database version......... "OCI_920 "
Patch level.............. "153"
Patch text............... " "
Supported environment....
Database................. "ORACLE 9.2.0.., ORACLE 10.1.0.., ORACLE
10.2.0.."
SAP database version..... "640"
Operating system......... "HP-UX B.11"
Memory usage.............
Roll..................... 16128
EM....................... 12569760
Heap..................... 0
Page..................... 65536
MM Used.................. 1716768
MM Free.................. 2470608
SAP Release.............. "640"
User and Transaction
Client.............. 220
User................ "CCEENGG"
Language key........ "E"
Transaction......... "RSA3 "
Program............. "SAPLRSAP"
Screen.............. "SAPMSSY0 1000"
Screen line......... 6
Information on where terminated
The termination occurred in the ABAP program "SAPLRSAP" in
"CALL_DATA_CUSTOMER_FUNCTION".
The main program was "RSFHGEN2 ".
The termination occurred in line 96 of the source code of the (Include)
program "LRSAPF06"
of the source code of program "LRSAPF06" (when calling the editor 960).
Source Code Extract
Line
SourceCde
66
CALL FUNCTION BW_BTE_CALL_BW204010_E
67
EXPORTING
68
I_DATASOURCE = L_DATASOURCE
69
I_UPDMODE    = P_UPDMODE
70
TABLES
71
I_T_SELECT   = P_T_SELECT
72
I_T_FIELDS   = P_T_FIELDS
73
C_T_DATA     = P_T_DATA
74
C_T_MESSAGES = L_T_MESSAGES
75
EXCEPTIONS
76
OTHERS       = 1.
77
DESCRIBE TABLE P_T_DATA LINES L_LINES.
78
MESSAGE S408 WITH L_LINES.
79
Handle BTE-Exit error messages
80
IF SY-SUBRC <> 0.
81
P_SUBRC = SY-SUBRC.
82
IF 1 = 2. MESSAGE E021 WITH ''. ENDIF.
83
MESSAGE_WRITE 'E' 'R3' '021' 'BW_BTE_CALL_BW204010_E' '' '' ''.
84
ENDIF.
85
IF NOT L_T_MESSAGES IS INITIAL.
86
PERFORM WRITE_BTE_EXIT_MESSAGES TABLES   L_T_MESSAGES
87
CHANGING P_SUBRC.
88
ENDIF.
89
ENDIF.
90
ENDIF.
91
92
Call Customer-Exit
93
DESCRIBE TABLE P_T_DATA LINES L_LINES.
94
MESSAGE S407 WITH 'EXIT_SAPLRSAP_001' 'CMOD' L_LINES.
95
CLEAR SY-SUBRC.
>>>>>
CALL CUSTOMER-FUNCTION '001'
97
EXPORTING
98
I_DATASOURCE             = L_DATASOURCE
99
I_ISOURCE                = L_12B_SOURCE
100
I_UPDMODE                = P_UPDMODE
101
TABLES
102
I_T_SELECT               = P_T_SELECT
103
I_T_FIELDS               = P_T_FIELDS
104
C_T_DATA                 = P_T_DATA
105
C_T_MESSAGES             = L_T_MESSAGES
106
EXCEPTIONS
107
RSAP_CUSTOMER_EXIT_ERROR = 1
108
OTHERS                   = 2.
109
DESCRIBE TABLE P_T_DATA LINES L_LINES.
110
MESSAGE S408 WITH L_LINES.
111
112
Handle Customer-Exit error messages
113
IF SY-SUBRC <> 0.
114
P_SUBRC = SY-SUBRC.
115
IF 1 = 2. MESSAGE E020 WITH ''. ENDIF.
Contents of system fields
Name
Val.
SY-SUBRC
0
SY-INDEX
1
SY-TABIX
1
SY-DBCNT
0
SY-FDPOS
0
SY-LSIND
0
SY-PAGNO
0
SY-LINNO
1
SY-COLNO
1
SY-PFKEY
SY-UCOMM
SY-TITLE
Report for the extractor call
SY-MSGTY
S
SY-MSGID
R3
SY-MSGNO
407
SY-MSGV1
EXIT_SAPLRSAP_001
SY-MSGV2
CMOD
SY-MSGV3
100
SY-MSGV4
Active Calls/Events
No.   Ty.          Program                             Include                             Line
Name
5 FUNCTION     SAPLRSAP                            LRSAPF06                               96
CALL_DATA_CUSTOMER_FUNCTION
4 FORM         SAPLRSAP                            LRSAPF06                               96
CALL_DATA_CUSTOMER_FUNCTION
3 FORM         GP3PDR0GQDXJ0ZOA35DPGNCU80M         GP3PDR0GQDXJ0ZOA35DPGNCU80M           274
PROCESS_DATA_PACKAGE
2 FORM         GP3PDR0GQDXJ0ZOA35DPGNCU80M         GP3PDR0GQDXJ0ZOA35DPGNCU80M           170
DATA_TRANSFER
1 EVENT        RSFHGEN2                            RSFHGEN2                               59
START-OF-SELECTION

Hello Raja,
I think some objects should still lying in the dev. server which are yet to be transported, also try to deactivate and reactivate the project for user exit for BW and transport it .
Also manually request can be created for transporting object "ZOXPRO0043" into quality environment and transport it .
Let us know the output for the same.
Hope that helps.
Regards
Kapadia
***Assigning points is the way to say thanks in SDN.***

Short dump in VF01 - Syntax error in program "RKEAK9RECP3000001"

Helo all,
We recently copied our production client to a QA client and when we try to save an SD invoice (VF01), we get a short dump titled - Syntax error in program "RKEAK9RECP3000001".
The dump long text states:
"The Dictionary structure or table "K9RECP3000001" is either not active"
" or does not exist."
and
NOTE in case of a SHORT DUMP:
if the following perform statement should lead to a short dump, then
the report stated in the short dump is missing (RKEAK9Rsssmmmnnnn)
Check if table K9Rsssmmmnnn exists. If not it should be transported
from the original system.
Regenerate the missing reports by using transaction SE37, entering
function KEDR_REGENERATE_ALL_REPORTS and pressing button 'Test' and
'Execute'.
but I tried to run function KEDR_REGENERATE_ALL_REPORTS in SE37 and the problem persists.
Maybe I'm not running it correctly - there is no execute option when pressing "Test" so I enter the function and press F8, which takes me to a screen titled "Test function module" and then I execute.
My suspicion is that table "K9RECP3000001" cannot be created or generated since it it a system specific naming convention K9RSSSCCC0001 in which SSS is system ID (in our case ECP is production and ECQ is QA) ans CCC is client number (300 in prod, and should be 286 in ECQ).
Has anyone encountered this type of a problem and knows how to fix it?
Needless to say, I looked at OSS notes, but did not find the solution there.
Any thought will be appreciated,
Yoel.

Shalom Yoel,
This problem may be caused by the fact that some derivation rules
that were originally created once in a system have been transported
into target system without transporting the dependent objects
as well (the generated tables for the derivation rule entries).
You can see this by execution of program RKEDRCHECK with only
parameter 'Check in all clients' marked. You will then get
inconsistent derivation steps (which refer to a generated table
table for the rule entries that doesn't exist because it was
not transported).
There are two ways to solve the problem:
1.) If you don't need these steps any more in derivation you can get
    rid of them by executing program RKEDRCHECK with both parameters
    marked ('Check in all clients' and 'Delete inconsistent steps').
2.) If these steps should remain you have to retransport the missing
    tables from the source system in which these tables have to exist
    (creating transport requests for the customizing of derivation by
    pushing on the 'Transport' icon in the source system in transactions
    KEDR and KEPC).
For each derivation step,the system generates a program RKEAK9R *
and a table K9R+ System ID+ Mandant+ a number of five figures
from the object number in KEDR.
br, Guido

Abort system error in program CL_RSDM_READ_MASTER_DATA and form_sidval_dire

HI All,
The following error is thrown when I execute the query.
abort system error in program CL_RSDM_READ_MASTER_DATA and form_sidval_direct_
However, earlier today, I ran this query successfully several times.This Query is on a multiprovider.
Appreciate your help in advance.
Regards,
Harika

Dear Harika,
Try to repair at RSRV and check.
Check: Re: SID error for characteristic
Srini

BW-WebI Report: MDDataSetBW.GetCellData. System error in program

Hi,
I'm trying to run a WebIntelligence Report connected with BW Query but return error before showing the results.
The error is:
Error in MDDataSetBW.GetCellData. System error in program CL_RSDRC_MULTIPROV and form SETRESOLVE-01- (consid.TxtDescrit.). (WIS 10901)
My query in BO contain 8 dimensions and 2 measures.
Someone has been there?
Tks!
Edited by: Peeter Cassiano Antunes Bonomo on Sep 6, 2011 7:33 PM

Ingo,
running the query in RSRT with the same elements works perfectly.The results are displayed.
But tested the MDX query in the transaction MDXTest and entered in the ABAP Debugger, press F8 and the following message appeared:
"The current application triggered a termination with a short dump".
"The current application program detected a situation which really should not occur. Therefore, a termination with a short dump was triggered on purpose by the key word MESSAGE (type x)."
"Short text of error message:
System error in program SAPLRRK0 and form CHECK_KHANDLE (consid.TxtDescrit)."
Does that help?
Tks,
Edited by: Peeter Cassiano Antunes Bonomo on Sep 9, 2011 3:18 PM

When I try to open an embedded PDF file I get an error "The program used to create this object is AcroExch.exe.

When I try to open an embedded PDF file (Word doc) I get an error "The program used to create this object is AcroExch.exe. That program is either not installed on your computer, or is corrupt..." I've tried about everything from unchecking
protected mode at startup to removing & reinstalling Adobe. Nothing seems to fix this issue. Any other ideas?
This is happening on Adobe reader 9, 10 & 11 with MS Word 2010 & 2013. I've uninstalled, cleaned & reinstalled Reader 9, 10 & 11, as well as Acrobat 10 Pro & 11 Standard. Removed "Protected mode at startup, and changed
the default program for viewing from reader to Acrobat. This will not go away. It is affecting production at our company.

" Help > Troubleshooting Information > Profile Directory: Open Containing Folder" . i can't find open containing folder in profile directory. it does give me the option to open the places.sqlite file using graphic converter. when i try that, graphic converter gives me a window saying that it can't be opened because it is corrupted or is not a file type supported by graphic converter.
i appreciate your help with a workaround to get the old bookmarks. that works. however, the problem has morphed from that concern to why adobe reader [the default app.] won't open firefox .sqlite files. is the problem in adobe reader or firefox? also, how can i tell if the places.sqlite file is corrupt?
i'm getting in over my head here and do appreciate your help.

!!System error in program SAPLRS_EXCEPTION and form RS_EXCEPTION_TO_MESSAGE

Hi Gurus,
Mater data text loading from a DSO to a InfoObject has failed in the process Chain at DTP step while trying to extract Data packet 2 from the DSO.
In the log i am getting following error message:
"System error in program SAPLRS_EXCEPTION and form RS_EXCEPTION_TO_MESSAGE (see long text)
Message no. BRAIN299".
Please help urgent.
FYI.....
we have recently done upgrade from BI/ABAP SP11 to SP15 and the latest Java SP || 14 (both included in SPS 14).
Points will surely be awarded.
Thanks,
Anurag

Hello Anurag,
Could you solve this problem? If so, please share the solution with me. I'm getting the same error while loading data using DTPs.
Regards,
Neha

Error : batch program

Similar Messages

Maybe you are looking for