Error: Bex broadcaster from Portal

Whenever I try to send an email through Bex broadcaster from Portal I get the following error message after executing the broadcast settings.
DomReaderError
Thanks,
Eveline

check this sap note 1025835
reward points if helpful

Similar Messages

Error when launching BEx analyzer from Portals

BI Gurus...
We are working on an initiative to migrate our user interface from SAP GUI to Enterprise Portal.
Bex Analyzer is primary mode of reporting at this time.
After importing the Roles into EP, I am able to execute the web queries successfully, in the BEx Wen analyzer. But, I get an error when I click on any of the excel workbooks. Our expectation was that once we click on the excel workbook name, the BEx analyzer will launch from EP. But it seems like the issue is with launching BEx Analyzer from BI Portal.
Has anyone faced this issue before?
Is it possible to launch BEx Analyzer from EP?
Are their some key portal settings we have missed out on to enable launching BEx analyzer from EP?
Please provide your thoughts/experience.
Thanks,
Ajay.

Hi WernerS,
Thanks for your response.
The RRMXP Transaction works and it launching the BEx Analyzer as expected.
Now, as per our research, I think there are 2 ways of launching BEx analyzer from BI Portals.
1) Call via a URL
You can call BEx Analyzer via the following URL: http(s)://<server:port>/sap/bc/bsp/sap/rsr_bex_launch/bexanalyzerportalwrapper.htm
You can modify the URL to open BEx Analyzer with either a workbook, a query or a query view. You can use the following parameters to do this:
●      Parameter to open the workbook: ?WBID=<wb_id>
I have tried calling via URL iView, but instead of launching the BEx Analyzer, it just throws a dialog box to "save" or "open" a file, RRMX.bex. When I try to open this file, it says "Invalid File Format".
I tried opening the file in notepad and I see the following parameters passed.
           test
           Data=BX2,CONAJP,EN,mikoyan,17,,,250,
           9
Any clue about what I am doing wrong?
2) Calling via a Transaction
You can generate BEx Analyzer in Portal Content Studio as an SAP Transaction iView.
The iViews are of type SAP Transaction iView and have the code link com.sap.portal.app integrator.sap.Transaction.
The most important properties are System, Transaction Code (TCODE) and ApplicationParameter.
●      The Transaction Code for all workbooks is RRMXP.
●      The ApplicationParameter property contains the value WBID=<WORKBOOK_ID>.
I have tried this approach as well. When I open this iView, I see the RRMXP transaction in the Internet explorer, but the workbooks still does not open in the BEx Analyzer (Excel)
Any thoughts on where am I going wrong ?
Thanks,
Ajay.

Broadcasting to Enterprise Portal using Bex Broadcaster from Query Designer

I have already been able to broadcast from Query Designer using BEx Broadcaster to the portal based on a role or a user.
I select "Export into Enterprise Portal" as the Distribution Type.
I then select "Export Document to Personal Portfolio" and then enter a role.
Then I check "User-specific" because I want it to be user specific.
This all works fine.
Now I get to my question.
Can I go one step further and broadcast to a folder call... lets say "Sales" inside of their Personal Portfolio?

Hi Eric,
I have the same problem. Were you able to resolve it?

BEx Broadcasting in portal PDF format thrugh Query designer

hi,
i have a problem in sending a query as a mail using broadcaster in pdf format through portal
The steps to reproduce:
from Query designer executing a query , it takes me to portal screen, there right click on the report and Broadcast and Export->Broadcast Email..Then a new window opens with BEx broad caster.From that if i select the Tab Information Broadcasting, there is a Description :No BW object selected, select a template ,Query or a workbook. " If i open Setting Web Template Tab: and if i select from HIstory 0BROADCAST_TEMPLATE70 or Stanard Web Template for Broadcasting>Transfer-->then i am getting the new window as Distribution Type: 1.Broadcast Emai 2. Broadcast to portal.. , And Output type1.MHTML 2.HTML 3. Online Link to Current Data.
But i am not getting Output Format "PDF",
guide me what to do to get the PDF option as OutputFormat.
where i am getting these options in Query designer itself Query-->Publish. but not in portal when calling portal through query designer by executing a query..
Thanks in advance

Hi,
Think these below links will help you.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/media/uuid/8053f46f-0701-0010-a697-9b33f8b7d2f5
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b03ff263-1e5d-2a10-0d89-a1d4424b101b
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/40d5d4dd-5d55-2a10-0cac-8639377bd5b7
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/media/uuid/664db870-0701-0010-ed92-daa4ea9fde8d
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/296edc90-0201-0010-7982-c6dc0b288296
/people/sap.user72/blog/2005/12/23/summary-of-new-features-for-information-broadcasting-in-sap-netweaver-2004s
/people/community.user/blog/2006/12/28/exception-broadcasting-in-sap-netweaver-2004s
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/0bfcac90-0201-0010-52a3-d5b270b86ef3
Kind Regards,
Shanbagavalli.S

Error when connect from portal system (abap ) to external ssl client - sm59

Hi I am tryign to setup a ssl connection from the abap sm59 portal system to an exteral server.. I have setup the certs that the client has given me in strust.but i m gettign the ffg error.
sysno      60
sid        PID
systemid   370 (Solaris on SPARCV9 CPU)
relno      7110
patchlevel 0
patchno    150
intno      20020600
make       multithreaded, Unicode, 64 bit, optimized
profile    /usr/sap/PID/SYS/profile/PID_DVEBMGS60_pidevdb
pid        3911
[Thr 01] Thu Jun 14 08:38:48 2012
[Thr 01] TRACE FILE TRUNCATED
[Thr 07] Thu Jun 14 08:39:07 2012
[Thr 07] *** ERROR during SecudeSSL_SessionStart() from SSL_connect()==SSL_ERROR_SSL
[Thr 07]    session uses PSE file "/usr/sap/PID/DVEBMGS60/sec/SAPSSLA.pse"
[Thr 07] SecudeSSL_SessionStart: SSL_connect() failed
[Thr 07]   secude_error 536871970 (0x20000422) = "SSL record with the wrong SSLPlaintext.version received"
[Thr 07] >>            Begin of Secude-SSL Errorstack            >>
[Thr 07] ERROR in ssl3_get_record: (536871970/0x20000422) SSL record with the wrong SSLPlaintext.version received
[Thr 07] <<            End of Secude-SSL Errorstack
[Thr 07]   SSL_get_state() returned 0x00002120 "SSLv3 read server hello A"
[Thr 07]   SSL NI-sock: local=57.24.111.151:34110 peer=57.24.110.116:5081
[Thr 07] <<- ERROR: SapSSLSessionStart(sssl_hdl=10720d530)==SSSLERR_SSL_CONNECT
[Thr 07] *** ERROR => IcmConnInitClientSSL: SapSSLSessionStart failed (-57): SSSLERR_SSL_CONNECT {00020a7c} [icxxconn_mt.c 1957]
When i change the sm59 connection not to use ssl. it give me a pop up screen . and asks me to enter user and password...
He then give me a private key file .. i.e a .pfx file but not sure how to load this in strust. I tried to convert in useign sapgenpse. but it fails with teh ffg error
12% sapgenpse import_p12 -p /usr/sap/PID/amos/amos_client.pse /usr/sap/PID/amos/amos_client_pk.pfx
import_p12: MISSING password for PKCS#12 file "/usr/sap/PID/amos/amos_client_pk.pfx"
Please enter PKCS#12 encryption password: *******
PKCS#12/PFX file contains 1 keypair:
1. FriendlyName = "amos.server.interface.webuser.web_int.cert"
     X.509v3 (type=Both) RSA-2048 (signed with sha1WithRsaEncryption)
     Subject="CN=AMOS WebService Interface Client, OU=IT&S MRO, O=South African Airways (Pty) Ltd, L=OR Tambo International Airport, SP=Gauteng, C=ZA"
     Issuer ="[email protected], CN=ca.flysaa.com, OU=Certificate Authority, O=South African Airways (Pty) Ltd, L=OR Tambo International Airport, SP=Gauteng, C=ZA"
ERROR: Incomplete certification path -- NEED certificate of "[email protected], CN=ca.flysaa.com, OU=Certificate Authority, O=South African Airways (Pty) Ltd, L=OR Tambo International Airport, SP=Gauteng, C=ZA"!
I have attached a doc of what it looks like.. appreciate any help

Hi,
There is an error in the publishing of template
Template :"bbpsc02" is not publised in ITS.
Go to T.code: SE80
Publish all the templates again and check
Check with your SAP BASIS team for the help
Regards
Ganesh

Transport KM rooms as entry point for broadcasting from Portal 7.01 to Portal 7.4 possible?

Hallo together,
is it possible to transport entry points (for broadcasting) from one portal to another?
For our upgrade BW 7.01 to BW 7.4 we want to transport the KM Content (including the rooms).
Transporting the rooms and room structures is no problem, but the transported rooms are not visible in ENTRY POINTS -> My Room Folders.
Only rooms that are newly created in the 7.4 Portal are visible in that folder.
Is there are way to make the transported rooms also visible there?
Thanks and best regards!
Christian

Hi Ramakrishna!
I know that WP-PI 6.00 will work fine with R/3 4.6C but my doubt is if I can use WP-PI 6.00 (which is
EP 6.00 plug-in) to connect the R/3 4.6c with an EP 7.00.
I didn´t find anything like WP-PI 7.00 in SAP Marketplace. I´ve already read the note you pointed out but it refers to EP 6.00. It also says you can use WP-PI 6.00 por EP 5.0 or Sap Workplace. But can I also use it with EP 7.00?
Thanks for your help.
Fernando

SAP SRM error when debugging from Portal

Hi,
I have put an external debugging point in the backend SRM system and trying to process the Shopping cart from portal. It is giving an error message at the statement where I have put the debug point.
The error message which I get in st22 is:
The ITS service "bbpsc02" failed since not template could be found for
the screen with the number 131 in the program "SAPMSSY3".
The template was searched in the following ITS services:
"BBPSC01"
Note that for language-dependent templates the language is included
in the search.
Could you please tell me what should I do for enabling teh debugging from the portal.
Regards,
Ravi G
Edited by: Ravi Kumar Gunda on Jul 21, 2009 5:32 PM

Hi,
There is an error in the publishing of template
Template :"bbpsc02" is not publised in ITS.
Go to T.code: SE80
Publish all the templates again and check
Check with your SAP BASIS team for the help
Regards
Ganesh

Error test SSO from Portal side

Hi all:
there are some error while test Tcode se38 from Portal side,
there is error says that : Portal runtime error , exception ID 09:44_07/05/10_0008_6087550, the detailed information please refer to log file , can you please tell me how to view the log file ?
thank you very much.

Hi,
You can access logiles from http://host:port/nwa and choose System Management ® Monitoring ® Logs and Traces.
You can select default trace in dropdown and search for relvant log message.
You should have administrator role to access NWA.
http://help.sap.com/saphelp_nw70/helpdata/en/07/8d5742f00ae054e10000000a155106/frameset.htm
You can check default.trc file under
j2eeclusterserver0log
Regards,
Koti Reddy
Edited by: Koti Reddy Chimalamarri on May 7, 2010 4:08 AM

Lotus Notes Error while Accessing from portal page

Hi,
I ahve suceesfully installed Lotus Notes Application , i am also
getting message from when accessing from External Administration
Link.i have added the Lotus Notes Inbox Portlet to my portal
page , But here it is showing Authentication Failed (Update
login information). I again provided all the informtion again ,
But still it is showing the same error . Can anybody help me
what to do ?

Dear
You will have to create one System for R/3 Server Access, Once you have created that you will have to maintain User mapping for System Access for each individual users, who want to access the DMS Documents from Portal.
Regards,
Tushar Dave

Bex broadcaster from web goes in infinite loop

Hi All,
After executing a query in web, when we click on the send button for the Bex broadcasting wizard to appear, the page keeps loading and the wizard does not appear.
Please can you give some pointers....
Thanks in advance

Hi Sireesha,
Can you right click on the Analysis item and go to Broadcast and Export->Broadcast E-Mail and check whether this opens the Broadcasting wizard?
Disable the pop ups,if you have for the browser
You can also open the query in BEx Broadcaster and can create the Broadcast setting through wizard to broadcast a query.
Rgds,
Murali

Marketing planner error when access from portal

Dear All
When we access our Maketing planner iview throgh Portal , it will not distribute the cost. But if we access it from CRM login then its working fine.
Recently we have upgrade CRM 4.0 to CRM 5.0 and Also we upgrade Portal 6.0 service pack 13 to now we have portal 6.0 service pack 19.
so pl. help me in this regards
charu

Hi,
There is an error in the publishing of template
Template :"bbpsc02" is not publised in ITS.
Go to T.code: SE80
Publish all the templates again and check
Check with your SAP BASIS team for the help
Regards
Ganesh

Error during export from portal using CTS+

Hi,
Our portal lansacape consists of EP7 EHP1 systems (EPD --> EPQ --> EPP). For transports in portal we have configured CTS+ on PI system which is a NW 7.1 system acting as a domain controller. All the configurations are completed. When I go to the export editor in Portal and click on Export it throws an error
"No valid transport request found; consult your system administrator".
In the default trace i can find the error
#1.5 #002219AC76D1007C0000005400000BC400046EB1C042BD43#1247609620743#com.sap.tc.di.draft.cts.impl.adapters.
jco.TmsTransportConfig#sap.com/irj#com.sap.tc.di.draft.cts.impl.adapters.jco.TmsTransportConfig#kbhonsley#35123##
MUSTANG.myit.main_EP7_27809050#kbhonsley#39a175f070c311decbfa002219ac76d1#SAPEngine_Application_Thread
[impl:3]_18##0#0#Error#1#/Applications#Plain###Cannot get default request (for application type: EP, user: kbhonsley,
SID: EP7, SC: null) [CANNOT_GET_DEFAULT_REQUEST]#
#1.5 #002219AC76D100770000004100000BC400046EB1F515D4A7#1247610507037#com.sap.tc.di.draft.cts.impl.adapters.
jco.TmsJCoAdapter#sap.com/irj#com.sap.tc.di.draft.cts.impl.adapters.jco.TmsJCoAdapter#kbhonsley#35123##MUSTANG
.myit.main_EP7_27809050#kbhonsley#39a175f070c311decbfa002219ac76d1#SAPEngine_Application_Thread[impl:3]_
37##0#0#Error#1#/Applications#Java###Error executing function (check stacktrace for details): CTS_WBO_GET_DEFAULT_REQUEST [EXECUTION_ERROR_CHECK_STACKTRACE]
[EXCEPTION]
#1#com.sap.mw.jco.JCO$Exception: (126) INVALID_SYSTEM: System EP7 is not valid; configure Organizer client in TMS.
As per SAP Note 1155884 point 7, it mentions to verify the client of application system is same as NON_ABAP_WBO_CLIENT.
Which is the application system ?
Any idea what is missing in the configuration? and how to resolve this?
Any help is much appreciated.
Thanks!!
Edited by: Kiran on Jul 14, 2009 4:32 PM

Hi Kiran,
I think you have created an RFC destination using visual admin or NWA right. com.sap.~CTS
in this RFC what is the client you have mentioned. It should be clnt 100 then and also the user must be exisiting in clnt 100.
Small help required: I have seen one of your post which address the below issue:
Already refered that note, It was the problem with CTSPROXY logical port, We created it in 000 but it should be in the integration client for the portal transports, After this we are getting the below error:
Deployment
Transport request : XX6K900001
System : XX6
tp path : tp
Version and release: 375.30.25 710
CTS Deploy Service - Version 0.92 06.03.2007
========================================================================
Deploy Web service destination = CTSDEPLOY
Directory = /usr/sap/trans/data
SDM Deploy URL = http://logonXX6.XYZ.com:51318
SLD Deploy URL =
XI Deploy URL =
Non-ABAP system XX6 (communication system XX5)
Deploy for SDM
Deploy File = TEST1_20090710_045816.epa
Start of Web service log
Deploy Service called with following parameters:
CommunicationData-Type:0
CommunicationData-Address:http://logonXX6.XYZ.com:51318
CommunicationData-Host:logonXX6.rwe.com
CommunicationData-Port:51318
CommunicationData-User:'filled'
CommunicationData-Password:'filled'
Deployable(0)
Deployable-Type:0
Deployable-Id:/usr/sap/trans/data/XX6K900001/TEST1_20090710_045816.epa
class java.lang.NoClassDefFoundError:com/sap/sdm/api/remote/UnsupportedProtocolException
com.sap.cts.deployer.DeployerFact.getDeployer (DeployerFact.java:30)
com.sap.cts.core.DeployManager.<init> (DeployManager.java:42)
com.sap.cts.ejb.DeployBean.deploy (DeployBean.java:99)
sun.reflect.NativeMethodAccessorImpl.invoke0 (NativeMethodAccessorImpl.java:-2)
sun.reflect.NativeMethodAccessorImpl.invoke (NativeMethodAccessorImpl.java:39)
sun.reflect.DelegatingMethodAccessorImpl.invoke (DelegatingMethodAccessorImpl.java:25)
Have you resolved this issue, if so can you please share the solution.
Regards,
Vamshi.

Broadcasting from Portal - Email Zip Functionality Issue

Hi,
After upgrading to BW 7.01 SP7, the functionality to send a zip broadcast email with multiple Excel files is not working properly. The broadcast setting in question is based off a query, and is using control query functionality to send out multiple files in Excel format. In the past using the control query has allowed for multiple files to be sent in a zip file, with each file filtered for the selected characteristic in the control query. When the ''As Zip File' checkbox is selected, the output zip file only contains the first value of the characteristic in an Excel spreadsheet. If the 'As Zip File' option is not checked, all Excel files based off the control query are included in the email. Has anyone else encountered this issue?
Thanks.

The problem was that the standard Windows Zip program would not display all the files. Once a 3rd party zip application was installed the files could be displayed.

BEx broadcaster error NF_ADR

Dear community,
does anyone have an idea what is wrong when i get the following error when i execute BEx broadcaster to send me a report via email:
"Error of type NF_ADR occurred sending document DUMMY.mht "
The steps i took to get to this error:
ran Bex broadcaster from query designer, used the wizzard to setup broadcasting, save the settings, and hit execute, then i get this in a separate window.
Juraj.

Hi,
Most likely the email addresses that are maintained in the settings are incorrect. They do not exist or the is a spelling mistake or the convention is wrong i.e missing '@' symbol or has ',' instead of '.'
This is particularly common in bursting where it is not immediately obvious that the email address is wrong so in this case check the email addresses maintained in the master data of the characteristic.
I hope this helps.
regards,
Michael

Bex broadcaster in bex analyzer

Dear all,
I have created a report in bex analyzer. I want to add this report to portal, therefore i need to select bex broadcasting from excel bex analyzer menu.
My questions are as follows:
1) As i read in document, i can put analyzer reports in portal. Is it correct?
2) In excel bex analyzer menu, my bex broadcaster menu item is in display mode. Why can it be like this?
Thanks

You can directly add the BEx query to the portal. While creating iview there is an option for BEx query also. Just select your query there and you can access this query through portal. For that Broadcaster option present in BEx analyzer I m still searching how to use it.
http://help.sap.com/saphelp_nw2004s/helpdata/en/bd/3d1640d4642402e10000000a1550b0/frameset.htm
Also check this for more details.....
http://help.sap.com/saphelp_nw2004s/helpdata/en/a3/7b583c2439e66fe10000000a114084/frameset.htm
Hope it helps
Regards
Lalit k Tyagi

Error: Bex broadcaster from Portal

Similar Messages

Maybe you are looking for