Error binding mac os x 10.7 to server 2008 standard

Hi guys,
I have an issue......i have to join a MBK pro to a server and below are the details:
I have Mac OS X 10.7.4 latest updates installed on the mbk pro and i have a windows server 2008 standard service pack 2.
when i tried to join the domain it returns an authentication error i tried every possibilities but in vain......anyone out there tried it before?????

You could try booting from an external USB hard drive and using a data recovery utility like Data Rescue X. Your mileage will vary depending on the circumstances. I would only try recovering data files and not recover the whole system. No sense fooling with an OS when it is trivial to reinstall and know it is working. Make an image of a freshly configured OS to aid in recovery like this.
Retrieve your documents & preferences if you are lucky. The data may still be there, but file names and other meta data may not be recoverable. If file names are not recoverable, then you will have tons of files to sort through trying to make sense of what is what. They are sorted by type, but you will be surprised at the number of such files used by the system and in temp/cache files. I recently had a case where someone deleted a bunch of files and then emptied the Trash. I got the files back, but with no file names. I was unable to find a way to retrieve the file names and even asked a forensic recovery expert for any reasonably priced software to do it.
If this is your only Apple computer and you need to make a bootable external drive, then make sure to install OSX on the external drive and not on the internal drive you are trying to recover.

Similar Messages

Unable to join Mac OS X 10.7.4 to windows server 2008 Standard SP2 Domain

Hi everyone,
I have an issue regarding the above, i have to connect several MBK pro using OS X 10.7.4 to a Windows Server 2008 Standard Service Pack 2.
I tried joining it using Static IP configurations, and using Domain names but it returns an error as Unable to connect to server and an error code 5302.
Please does anybody have a hint to this issue.....your help will be most appreciated.
Best Regards,
Iven.

I have verified every required settings closely and had it cross checked over and over again with the network administrator himself, every settings was in place but when i tried to bind with the domain it returns server not found.
I also ping the server and it works....i verified the RJ45 cable...all is fine.
i tried updating from 10.7.3 to 10.7.4 but the problem persists.
Infact originally i had to bind the Mac OS X 10.7.3 and 10.7.4 to a Windows Server 2008 Standard SP2, it didn't worked then afterwards i tried to bind them to a Windows Server 2008 R2....it worked on 2 but on the third it didn't.
So does anybody have an idea or can anyone confirm me if Windows Server 2008 Standard SP2 is compatible with Mac OS X 10.7.4???

Windows Server 2008 Standard - Blue screen Error

Hi All,
I am running a Server 2008 Standard. My server shows an error on startup and says it has not been shutdown propely. I have got the below error,
Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.0.6002.2.2.0.272.7
Locale ID: 16393
Additional information about the problem:
BCCode: d1
BCP1: FFFFFFF8
BCP2: 00000002
BCP3: 00000001
BCP4: 90FCB1A7
OS Version: 6_0_6002
Service Pack: 2_0
Product: 272_2
Files that help describe the problem:
C:\Windows\Minidump\Mini072514-05.dmp
C:\Users\Administrator\AppData\Local\Temp\2\WER-7014194-0.sysdata.xml
C:\Users\Administrator\AppData\Local\Temp\2\WER9A7C.tmp.version.txt
Read our privacy statement:
http://go.microsoft.com/fwlink/?linkid=50163&clcid=0x0409
Looks like the server restarted after an error. Can you please help me in finding the core level of the problem. Reliability monitor shows its a windows error and the same is happening for last 3 days.
Thanks,
vaschell
vaschell

One of these may help.
http://www.microsoft.com/en-us/search/SupportResults.aspx?q=0xd1%202008
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

Windows Server 2008 standard Activation Error Code 0xc004c003

Hi
I am trying to activate the windows server 2008 standard but i am not able to do so.
I am getting the error.
The product key you have entered does not appear to be a valid windows server product key.
I have also call to microsoft activation team but they won't be able to resolve the issue, they found that the product key is valid. Then why it is not getting activated.
Can someone help on this ? any reply really appreciated.

Hi,
Based on your description, we need to make sure that the product key information has been typed correctly and the product key matches to the edition installed.
Besides, regarding error code 0xC004C003, the following article can be worth taking a look.
Error 0xC004E002 during activation for Windows Vista, Windows Server 2008, Windows 7, or Windows Server 2008 R2
http://support.microsoft.com/kb/978305/en-us
Hope it helps.
Best regards,
Frank Shen

Dymo Labelwriter printers not working via Mac Remote Desktop connection into Windows Server 2008

I'm having a really hard time getting Dymo labelwriters (models 335 turbo and 450 turbo) to work over a remote desktop connection and I'd appreciate any help you can offer.
To briefly describe the situation, I'm working for a Doctor's office, moving their IT from a remotely-hosted environment where employees connect to their Windows Server 2008 virtual machines (hosted off-site) via Windows 7 machines through Microsoft's remote
desktop software.
The new setup will have new servers running in-house instead of remotely and will be based on Apple's Mac Mini machines running Windows 7 for some tasks through Parallels virtualization
software running directly on each employee's Mac Mini.
We have 3 of the Dymo 450 Turbo products and one 330 Turbo, each connected directly to a Mac Mini.
Here's the problem: I have Microsoft's Remote Desktop software running on the Macs natively, connected to each employee's virtual machine on the remote server for now, until the time comes to make the switch to using the new in-house server. The remote desktop
software works fine - employees are able to connect successfully and access their desktops fine. I have the "Forward Printing Devices" option checked in the Microsoft Remote Desktop app so that the hosted virtual desktops can see the local labelwriters.
However, the Dymo Label software running on the remote server will not recognize that a labelwriter is present.
If I go to the Printers and Devices window on the remote server, the labelwriter shows up fine, named "dymo labelwriter 450 turbo (redirected 10)" however running the Dymo Label software gives an error, "Dymo label says no printer connected:
dymo label printer requires a dymo label printer be installed and connected ..."
To try and narrow down the cause of the problem, on the same Mac, I ran Windows 7 via Parallels and set up a new remote desktop connection within that Windows VM. Just to be clear, instead of using the RDC software running in the Mac OS, this new connection
is using a Windows virtual machine running on the same Mac, with the RDC being established from within that Windows VM. Again, I forward printing devices and the labelwriter shows up in Printers and Devices on the remote server as "dymo labelwriter 450
turbo (redirected 10)" This time, the Dymo Label software recognizes the attached labelwriter and runs fine.
I'd appreciate any advice you can give on why, as far as the remote server is concerned, a forwarded labelwriter from Microsoft remote desktop running natively on a Mac isn't recognized
but it is if forwarded from within Windows, bearing in mind that the labelwriter shows up on the remote server in both instances and is called the same name in devices and printers.
Sorry for the long-winded question. I hope you can help me.

Hi,
Thank you for posting in Windows Server Forum.
Firstly please check whether you have driver capable for your printer with MAC MRD. Also I would like you to check with updated MRD version 8.0.9 for MAC OSX.
https://itunes.apple.com/in/app/microsoft-remote-desktop/id715768417?mt=12
Because as you have commented it can work with windows RDP, so please also try to contact Dymo Labelwriter printer and inquire regarding the issue.
Hope it helps!
Thanks.
Dharmesh Solanki
TechNet Community Support

OS Error in starting the OCFS Service on windows server 2008

Hi,
Installing the Oracle 11g R1 CRS on windows server 2008 operating system . It is displaying the folllowing error message
ERROR : OS in Error in starting the OCFS Service
Can any one please tell what could be the issue ..
Thank You

Solved this after some trawling through xml configuration files on the server.
The file C:\Oracle\product\11.1.0\db_1\owb\j2ee\config\http-web-site.xml contains the reference to keystore.jks:
<ssl-config keystore="*%ORACLE_HOME%*/owb/j2ee/config/keystore.jks" keystore-password="->keystoreadmin"/>
changing this to:
<ssl-config keystore="C:\Oracle\product\11.1.0\db_1/owb/j2ee/config/keystore.jks" keystore-password="->keystoreadmin"/>
and the OC4J container starts successfully.
Regards,
-Haakon-

Error when running a report in Crystal Reports Server 2008

Received the following error message:
Error in File Relatorio4: Failed to load database information.
Or
Error
Failed to open the connection. Relatorio4 Details: [Database Vendor Code:
12154 ]
I'm trying to run a report Crystal Reports 2008 in Crystal Reports Server 2008.
I use the native driver for Oracle (Oracle Server).
Any help would be appreciated!

Hi Vilari,
Do a small test to test your connection.
-Right Click on desktop ->
Create new text document->
Save as test.UDL->
double click and test connection by selecting driver name,datasource name,user id and password.
Click on Test Connection.
It should be succeed.
Database Vendor Code is the error returned by the database client/server.Its not a Crystal Report Error.Check Microsoft's web site for more info on what that error means.
Likely the client has not been in stalled or configured or both.
Also check that proper DSN is configured or not.
As you are using Oracle make sure that a TNSNAMES.ORA file exists and is in the proper place and accessible. See the operating system specific manual for details on the required name and location.
Check to see that the service name exists in one of the TNSNAMES.ORA files and add it if necessary.
Make sure there are no syntax errors anywhere in the file. Particularly look for unmatched parentheses or stray characters. Any error in a TNSNAMES.ORA file makes it unusable.
Hope this helps
Regards,
Shweta

Update error of SQL Server 2012 enterprise running on Windows server 2008 standard SP2 (32 bits)

Hi there;
I have a windows server 2008 SP2 (32bits) in which I have an instance of SQL Server
2008 and another of 2012.
My Windows server 2008 installed the following updates; (see below).
(KB2898858),(KB2909921),(KB890830),(KB2898869),(KB2911502),(KB2901126),
(KB2916036),(KB2862973),(KB2901113)
After the machine was re-started, I was not abble to connect
to the instance of SQL Server 2012. I am able
to connect to the instance of SQL Server 2008.
The error message I get when I atemp to connect can be found
at the end of the list of updates below.
Do I need to uninstall an update? if so, which one and how do I do that?
Thanks Gabriel I. Ruiz
Security Update for Microsoft .NET Framework 2.0 SP2 on Windows Vista SP2 and Windows Server 2008 SP2 x86 (KB2898858)
Installation date: ‎2/‎12/‎2014 11:42 PM
Installation status: Successful
Update type: Important
More information:
http://support.microsoft.com/kb/2898858
Cumulative Security Update for Internet Explorer 9 for Windows Server 2008 (KB2909921)
Installation date: ‎2/‎12/‎2014 11:42 PM
Installation status: Successful
Update type: Important
More information:
http://support.microsoft.com/kb/2909921
Windows Malicious Software Removal Tool - February 2014 (KB890830)
Installation date: ‎2/‎12/‎2014 11:41 PM
Installation status: Successful
Update type: Important
More information:
http://support.microsoft.com/kb/890830
Security Update for Microsoft .NET Framework 4.5.1 on Windows 7, Windows Vista and Windows Server 2008 x86 (KB2898869)
Installation date: ‎2/‎12/‎2014 11:40 PM
Installation status: Successful
Update type: Important
More information:
http://support.microsoft.com/kb/2898869
Security Update for Microsoft .NET Framework 2.0 SP2 on Windows Vista SP2 and Windows Server 2008 SP2 x86 (KB2911502)
Installation date: ‎2/‎12/‎2014 11:36 PM
Installation status: Successful
Update type: Important
More information:
http://support.microsoft.com/kb/2911502
Security Update for Microsoft .NET Framework 4.5.1 on Windows 7, Windows Vista, and Windows Server 2008 x86 (KB2901126)
Installation date: ‎2/‎12/‎2014 11:36 PM
Installation status: Successful
Update type: Important
More information:
http://support.microsoft.com/kb/2901126
Security Update for Windows Server 2008 (KB2916036)
Installation date: ‎2/‎12/‎2014 11:34 PM
Installation status: Successful
Update type: Important
More information:
http://support.microsoft.com/kb/2916036
Security Update for Windows Server 2008 (KB2862973)
Installation date: ‎2/‎12/‎2014 11:34 PM
Installation status: Successful
Update type: Important
More information:
http://support.microsoft.com/kb/2862973
Security Update for Microsoft .NET Framework 2.0 SP2 on Windows Vista SP2 and Windows Server 2008 SP2 x86 (KB2901113)
Installation date: ‎2/‎12/‎2014 11:34 PM
Installation status: Successful
Update type: Important
More information:
http://support.microsoft.com/kb/2901113
===================================
Cannot connect to HAVANA\HAVANA_2012_1ST.
===================================
The client was unable to establish a connection because of an error during connection initialization process before login. Possible causes include the following: the client tried to connect to an unsupported version of SQL Server; the server was too busy
to accept new connections; or there was a resource limitation (insufficient memory or maximum allowed connections) on the server. (provider: Shared Memory Provider, error: 0 - No process is on the other end of the pipe.) (.Net SqlClient Data Provider)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft%20SQL%20Server&EvtSrc=MSSQLServer&EvtID=233&LinkId=20476
Server Name: HAVANA\HAVANA_2012_1ST
Error Number: 233
Severity: 20
State: 0
Program Location:
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
at System.Data.SqlClient.TdsParserStateObject.SNIWritePacket(SNIHandle handle, SNIPacket packet, UInt32& sniError, Boolean canAccumulate, Boolean callerHasConnectionLock)
at System.Data.SqlClient.TdsParserStateObject.WriteSni(Boolean canAccumulate)
at System.Data.SqlClient.TdsParserStateObject.WritePacket(Byte flushMode, Boolean canAccumulate)
at System.Data.SqlClient.TdsParser.SendPreLoginHandshake(Byte[] instanceName, Boolean encrypt)
at System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, Boolean withFailover)
at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, SecureString newSecurePassword, Boolean ignoreSniOpenTimeout, TimeoutTimer timeout, Boolean withFailover)
at System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(ServerInfo serverInfo, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance, SqlConnectionString connectionOptions, SqlCredential credential, TimeoutTimer
timeout)
at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(TimeoutTimer timeout, SqlConnectionString connectionOptions, SqlCredential credential, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, SqlCredential credential, Object providerInfo, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance,
SqlConnectionString userConnectionOptions, SessionData reconnectSessionData)
at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, DbConnectionPoolKey poolKey, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection, DbConnectionOptions userOptions)
at System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection(DbConnection owningConnection, DbConnectionPoolGroup poolGroup, DbConnectionOptions userOptions)
at System.Data.ProviderBase.DbConnectionFactory.TryGetConnection(DbConnection owningConnection, TaskCompletionSource`1 retry, DbConnectionOptions userOptions, DbConnectionInternal oldConnection, DbConnectionInternal& connection)
at System.Data.ProviderBase.DbConnectionInternal.TryOpenConnectionInternal(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions)
at System.Data.ProviderBase.DbConnectionClosed.TryOpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions)
at System.Data.SqlClient.SqlConnection.TryOpenInner(TaskCompletionSource`1 retry)
at System.Data.SqlClient.SqlConnection.TryOpen(TaskCompletionSource`1 retry)
at System.Data.SqlClient.SqlConnection.Open()
at Microsoft.SqlServer.Management.SqlStudio.Explorer.ObjectExplorerService.ValidateConnection(UIConnectionInfo ci, IServerType server)
at Microsoft.SqlServer.Management.UI.ConnectionDlg.Connector.ConnectionThreadUser()
===================================
No process is on the other end of the pipe

Hi,
Check if SQL Server service is running fine. I doubt you may have changed the user account password used for SQL Server service. After restarting the machine, you also need to update the user account of SQL Server service in Configuration
Manager. Re-type the user account name and password under Log on tab and see how it helps.
Thanks.
Tracy Cai
TechNet Community Support

Windows Server 2008 Standard 32-bit gives Rundll32.exe error and blank screen on bootup

Last week our file server installed automatic updates and then requested a reboot. After rebooting it repeatedly gave a blue screen and rebooted. After 5 hours on the phone with Microsoft support we all gave up on it with no solution. Later
we were able to get the machine to boot using an old mirrored hard drive of the system drive. We can now access our data drive, however after login we get this error:
Rundll32.exe : Windows cannot access the specified device, path, or file.You may not have the appropriate permission to access the
item.
and the console just shows a blank screen. We are not able to do anything on the server. I can Ctrl-Alt-Del and bring up Task
Manager and I see that SQL Server is not running, so not all services are running normally.
Any help would be appreciated.
Thanks

Hi,
Based on my research, this issue occurs because the Rundll32.exe file is corrupted. You need to extract a new copy of Rundll32.exe in C:\Windows\System32.
To do this, you can either copy it from another same version of Windows or perform an In-Place Upgrade.
How to Perform an In-Place Upgrade on Windows Vista, Windows 7, Windows
Server 2008 & Windows Server 2008 R2
Best Regards
Dale
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

Error Accessing Report in SharePoint Integrated Mode (SQL Server 2008 with SharePoint 2007)

I have installed reporting services with SharePoint Integration Mode, however, whenever I access the report, below error occurs:
Report Server has encountered a SharePoint error. (rsSharePointError)
Exception occurred. (Exception from HRESULT: 0x80020009 (DISP_E_EXCEPTION))
Exception occurred. (Exception from HRESULT: 0x80020009 (DISP_E_EXCEPTION)
Checking through the Log Files, there is more detailed error message, but not sure what cause the error:
library!ReportServer_0-2!4064!11/01/2010-15:00:39:: Call to GetPermissionsAction(http://[servername]/sites/Reporting/Reports/TestReport.rdl).
library!ReportServer_0-2!4170!11/01/2010-15:00:39:: Call to ListParentsAction(http://[servername]/sites/Reporting/Reports/TestReport.rdl).
library!ReportServer_0-2!4170!11/01/2010-15:00:40:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.SharePointException: Report Server has encountered a SharePoint error., ;
Info: Microsoft.ReportingServices.Diagnostics.Utilities.SharePointException: Report Server has encountered a SharePoint error. ---> Microsoft.SharePoint.SPException: Exception occurred. (Exception from HRESULT: 0x80020009 (DISP_E_EXCEPTION)) --->
System.Runtime.InteropServices.COMException (0x80020009): Exception occurred. (Exception from HRESULT: 0x80020009 (DISP_E_EXCEPTION))
   at Microsoft.SharePoint.Library.SPRequestInternalClass.GetFileAsByteArray(String bstrUrl, String bstrWebRelativeUrl, Boolean bHonorLevel, Byte iLevel, OpenBinaryFlags grfob)
   at Microsoft.SharePoint.Library.SPRequest.GetFileAsByteArray(String bstrUrl, String bstrWebRelativeUrl, Boolean bHonorLevel, Byte iLevel, OpenBinaryFlags grfob)
   --- End of inner exception stack trace ---
   at Microsoft.SharePoint.Library.SPRequest.GetFileAsByteArray(String bstrUrl, String bstrWebRelativeUrl, Boolean bHonorLevel, Byte iLevel, OpenBinaryFlags grfob)
   at Microsoft.SharePoint.SPFile.GetFileContent(SPOpenBinaryOptions openOptions)
   at Microsoft.SharePoint.SPFile.OpenBinary(SPOpenBinaryOptions openOptions)
   at Microsoft.SharePoint.SPFile.OpenBinary()
   at Microsoft.ReportingServices.SharePoint.Server.SharePointServiceHelper.SyncToRSCatalog(String path, Boolean createOnly)
   --- End of inner exception stack trace ---
library!ReportServer_0-2!4064!11/01/2010-15:00:40:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.SharePointException: Report Server has encountered a SharePoint error., ;
Info: Microsoft.ReportingServices.Diagnostics.Utilities.SharePointException: Report Server has encountered a SharePoint error. ---> Microsoft.SharePoint.SPException: Exception occurred. (Exception from HRESULT: 0x80020009 (DISP_E_EXCEPTION)) --->
System.Runtime.InteropServices.COMException (0x80020009): Exception occurred. (Exception from HRESULT: 0x80020009 (DISP_E_EXCEPTION))
   at Microsoft.SharePoint.Library.SPRequestInternalClass.GetFileAsByteArray(String bstrUrl, String bstrWebRelativeUrl, Boolean bHonorLevel, Byte iLevel, OpenBinaryFlags grfob)
   at Microsoft.SharePoint.Library.SPRequest.GetFileAsByteArray(String bstrUrl, String bstrWebRelativeUrl, Boolean bHonorLevel, Byte iLevel, OpenBinaryFlags grfob)
   --- End of inner exception stack trace ---
   at Microsoft.SharePoint.Library.SPRequest.GetFileAsByteArray(String bstrUrl, String bstrWebRelativeUrl, Boolean bHonorLevel, Byte iLevel, OpenBinaryFlags grfob)
   at Microsoft.SharePoint.SPFile.GetFileContent(SPOpenBinaryOptions openOptions)
   at Microsoft.SharePoint.SPFile.OpenBinary(SPOpenBinaryOptions openOptions)
   at Microsoft.SharePoint.SPFile.OpenBinary()
   at Microsoft.ReportingServices.SharePoint.Server.SharePointServiceHelper.SyncToRSCatalog(String path, Boolean createOnly)
   --- End of inner exception stack trace ---
Any idea on how to resolve the issue?

Hi Jin Chen,
Thank you for your response. I have disabled all the Symantec End Point Protection Service, but problem persists..
Further, I have checked through the ULS Log in SharePoint, there is more error reported there:
11/03/2010 15:19:48.44 ReportingServicesService.exe (0x3510)
0x4064
Windows SharePoint Services Database
6f8g Unexpected
Unexpected query execution failure, error code 282. Additional error information from SQL Server is included below. "The 'proc_GetTpWebMetaDataAndListMetaData' procedure attempted to return a status of NULL, which is not allowed. A status of 0 will be
returned instead." Query text (if available): "{?=call proc_GetTpWebMetaDataAndListMetaData(?,'F77D6A37-F8D2-492C-911C-923C8A135DEB',?,NULL,1,?,?,6187)}"
11/03/2010 15:19:51.46 ReportingServicesService.exe (0x3510)
0x4064
Windows SharePoint Services General
8e2s Medium
Unknown SPRequest error occurred. More information: 0x80020009
11/03/2010 15:19:51.69 ReportingServicesService.exe (0x3510)
0x1EEC
Windows SharePoint Services General
8e2s Medium
Unknown SPRequest error occurred. More information: 0x80020009
Do you have any idea based on the error above?

SMS_SRS_REPORTING_POINT - Error retrieving folders with SCCM 2012 and SQL Server 2008 R2 SP2

Hi:
According to all the Reporting Services logs my Reporting Point was setup correctly. When I try and run any report I see the entries below in the srsrp.log on the SQL Server. The report names show up in the Console but when I right any of the
listed reports I get errors and no report runs.
I am running SQL Server 2008 R2 SP2 on a remote server. SQL is installed on its own server. There is no firewall between the Configuration Manager server and SQL Server.
Thanks.
Mark
(!) Error retrieving folders - [A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance
name is correct and that SQL Server is configured to allow remote connections. (provider: TCP Provider, error: 0 - A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because
connected host has failed to respond.)].   SMS_SRS_REPORTING_POINT
1/25/2013 9:15:07 AM    4532 (0x11B4)
No folder configuration information found.
SMS_SRS_REPORTING_POINT 1/25/2013 9:15:07 AM
4532 (0x11B4)
Next security configuration at [1/25/2013 9:22:42 AM]
SMS_SRS_REPORTING_POINT 1/25/2013 9:15:07 AM
4532 (0x11B4)
Root Folder exists
SMS_SRS_REPORTING_POINT 1/25/2013 9:15:07 AM
4532 (0x11B4)
Successfully checked that the SRS web service is healthy on server DBSCCM.LOCAL
SMS_SRS_REPORTING_POINT 1/25/2013 9:15:07 AM
4532 (0x11B4)
Waiting for changes for 1 minutes
SMS_SRS_REPORTING_POINT 1/25/2013 9:15:07 AM
4532 (0x11B4)
SRSRP registry key change notification triggered.
SMS_SRS_REPORTING_POINT 1/25/2013 9:15:16 AM
4532 (0x11B4)
Waiting for changes for 1 minutes
SMS_SRS_REPORTING_POINT 1/25/2013 9:15:16 AM
4532 (0x11B4)
Timed Out...
SMS_SRS_REPORTING_POINT 1/25/2013 9:16:16 AM
4532 (0x11B4)
Reporting Services URL from Registry [http://dbsccm/ReportServer/ReportService2005.asmx]
SMS_SRS_REPORTING_POINT 1/25/2013 9:16:16 AM
4532 (0x11B4)
Reporting Services is running
SMS_SRS_REPORTING_POINT 1/25/2013 9:16:16 AM
4532 (0x11B4)
Retrieved datasource definition from the server.
SMS_SRS_REPORTING_POINT 1/25/2013 9:16:16 AM
4532 (0x11B4)
Retrieved datasource definition from the server.
SMS_SRS_REPORTING_POINT 1/25/2013 9:16:16 AM
4532 (0x11B4)
Updating data source {5C6358F2-4BB6-4a1b-A16E-8D96795D8602} at ManagedDesktops_MD1
SMS_SRS_REPORTING_POINT 1/25/2013 9:16:16 AM
4532 (0x11B4)
(!) Error retrieving folders - [A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance
name is correct and that SQL Server is configured to allow remote connections. (provider: TCP Provider, error: 0 - A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because
connected host has failed to respond.)].   SMS_SRS_REPORTING_POINT
1/25/2013 9:17:40 AM    4532 (0x11B4)
No folder configuration information found.
SMS_SRS_REPORTING_POINT 1/25/2013 9:17:40 AM
4532 (0x11B4)
Next security configuration at [1/25/2013 9:22:42 AM]
SMS_SRS_REPORTING_POINT 1/25/2013 9:17:40 AM
4532 (0x11B4)
Root Folder exists
SMS_SRS_REPORTING_POINT 1/25/2013 9:17:40 AM
4532 (0x11B4)
Successfully checked that the SRS web service is healthy on server DBSCCM.LOCAL
SMS_SRS_REPORTING_POINT 1/25/2013 9:17:40 AM
4532 (0x11B4)
Waiting for changes for 1 minutes
SMS_SRS_REPORTING_POINT 1/25/2013 9:17:40 AM
4532 (0x11B4)
Timed Out...
SMS_SRS_REPORTING_POINT 1/25/2013 9:18:40 AM
4532 (0x11B4)
Reporting Services URL from Registry [http://dbsccm/ReportServer/ReportService2005.asmx]
SMS_SRS_REPORTING_POINT 1/25/2013 9:18:40 AM
4532 (0x11B4)
Reporting Services is running
SMS_SRS_REPORTING_POINT 1/25/2013 9:18:40 AM
4532 (0x11B4)
Retrieved datasource definition from the server.
SMS_SRS_REPORTING_POINT 1/25/2013 9:18:40 AM
4532 (0x11B4)
Retrieved datasource definition from the server.
SMS_SRS_REPORTING_POINT 1/25/2013 9:18:40 AM
4532 (0x11B4)
Updating data source {5C6358F2-4BB6-4a1b-A16E-8D96795D8602} at ManagedDesktops_MD1
SMS_SRS_REPORTING_POINT 1/25/2013 9:18:40 AM
4532 (0x11B4)

Hi:
Windows Firewall is off on both systems.
I can ping the Configuration Manager server from the SQL Server by netbios name, ip address and fully qualified domain name.   I can ping the SQL Server from the Configuration Manager server by netbios name, ip address and fully qualified domain
name.
I have uninstalled and installed the Reporting Point Service a couple of times and everything looks fine according to the logs after the install finishes but these errors only appear each time I try and Run a report.
Mark

Attempted to perform an unauthorized operation error on windows 8.1 while installing SQL server 2008

Hi,
I am getting the error "Attempted to perform an unauthorized operation" on windows 8.1 while installing
SQL server 2008.
The specific error is The error is Attempted to perform an unauthorized operation."
at stepSqlBrowserConfigAction_install_ConfigNonRC_Cpu32 .
I have tried everything from copying to the C drive. I am the admin on the machine. I also checked access in registry. It already has acesss to HKLM\System\CurrentControlSet\Control\WMI\security
Can someone comment on how to resolve this issue. I also tried NT
AUTHORITY\SYSTEM but getting the same error.
Any help would be appreciated.

Hello,
Please note that SQL Server 2008 requires Service Pack 3 (SP3) to make it compatible with
Windows 8.1. Please perform an slipstream installation of SQL Server 2008 + SP3:
http://support.microsoft.com/kb/955392
If it fails again, please share with us the Summary.txt log file and the details.txt log file. The following article
may help you locate those files on disk::
http://msdn.microsoft.com/en-us/library/ms143702(v=sql.100).aspx
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

DBCA error ORA-01034 oracle not available on Windows server 2008 r2 64

Hi All,
I have installed oracle 11.2.0.1 on my system having OS Windows server 2008. Then after that through DBCA i was creating the database during that i got ORA-01034 oracle not available. if any body know how to resolve it please reply me.
Thanks & Regards,
Arya

Did you got the error in between when DBCA executed some percentage of work? PLease check its logfiles to get the exact error.

Error 1625 with Adobe Reader Update on Windows Server 2008 R2 OS

For the last two months when I receive updates to Adobe Reader 9.3 I get Error 1625: Update failed. Update not permitted by system policy.   But there is no system policy since this is a stand-alone machine.
Windows Server 2008 R2 is equivalent to Windows 7 OS but has some special security features. If I could manually download and run this update and by pass the Adobe automated install I might be able to fix the problem by running the update "as administrator" but I think Adobe doesn't give me that choice.
I have uninstalled and re-installed Adobe Reader 9.3 but still get the same result when applying this update.
Adobe reader is working fine, so I would be happy also if Adobe just stopped trying to send me this update.
Any suggestions?

I did. When I posted my last response ending in "did not work" I had a dashed line and
Adobe in there infinite wisdom interpreted that as an end of message.   So here is the rest
of my last post which was cut off:
So I then tried ʇɐb ɹəuəllıʍ's solution (the one above your suggestion) - downloading the updates to my desktop and applying them by hand.   That worked.
But this means I may need to download all future updates by hand for this computer.   It's great that ʇɐb ɹəuəllıʍ posted links for these three updates above, but I'm wondering how to easily automate getting download links for all future updates since I don't have access to the parent directory http://ardownload.adobe.com/pub/adobe/reader/win/.
Please suggest a way I can install all future updates by hand without requesting a special link. In particular, when you download an update using Adobe Reader "search for updates", where is that update saved so perhaps I could run it by hand instead of the automated way.

Error: 0x800f0826 recived when installing SP1 of windows server 2008 R2

Tried to install the Windows server 2008 R2 SP1 but failed with the error code 0x800f0826.
The update install fine and when reboots it says "Installation was not successful" Error 0x800f0826.
I already follow steps as mentioned in this http://support.microsoft.com/kb/2505743 , but still no success.
plz. advice
SALMAN

Below are the CheckSUR.persist logs.
=================================
Checking System Update Readiness.
Binary Version 6.1.7601.21645
Package Version 15.0
2012-06-01 23:21
Checking Windows Servicing Packages
Checking Package Manifests and Catalogs
Checking Package Watchlist
Checking Component Watchlist
Checking Packages
Checking Component Store
Summary:
Seconds executed: 868
No errors detected
=================================
Checking System Update Readiness.
Binary Version 6.1.7601.21645
Package Version 15.0
2012-06-04 11:26
Checking Windows Servicing Packages
Checking Package Manifests and Catalogs
Checking Package Watchlist
Checking Component Watchlist
Checking Packages
Checking Component Store
Summary:
Seconds executed: 557
No errors detected
=================================
Checking System Update Readiness.
Binary Version 6.1.7601.21645
Package Version 15.0
2012-06-04 11:53
Checking Windows Servicing Packages
Checking Package Manifests and Catalogs
Checking Package Watchlist
Checking Component Watchlist
Checking Packages
Checking Component Store
Summary:
Seconds executed: 271
No errors detected
=================================
Checking System Update Readiness.
Binary Version 6.1.7601.21645
Package Version 15.0
2012-06-04 12:47
Checking Windows Servicing Packages
Checking Package Manifests and Catalogs
Checking Package Watchlist
Checking Component Watchlist
Checking Packages
Checking Component Store
=================================
Checking System Update Readiness.
Binary Version 6.1.7601.21645
Package Version 15.0
2012-06-04 12:51
Checking Windows Servicing Packages
Checking Package Manifests and Catalogs
Checking Package Watchlist
Checking Component Watchlist
Checking Packages
Checking Component Store
Summary:
Seconds executed: 132
No errors detected
SALMAN

Error binding mac os x 10.7 to server 2008 standard

Similar Messages

Maybe you are looking for