Error blue screen with KM2M Combo Board

The setup of my PC is:
KM2M Combo L
Athlon 2200+
1x128 Mb DDR PC 2100
S3 graphics pro savage DDR (on board, currently 16M)
AC97 audio controller (on board)
HDD Samsung 6 G
CD 52x
Floppy drive
Mouse, keyboard PS/2
Windows XP Home version 2002
The problem is this:
Once the operative system is installed, the pc works correctly. When the drivers on the board drivers cd are installed, the system crash often, especially playing a movie or running a game, and a error blue screen are shown.
Please somebody tell me how can I solve this fastidious problem, or at less, what the failure could be.
Thanks a lot!

What brand of memory ? Perhaps 128 Mb. of memory is too poor, since your problems happens when playing videos or games. Borrow a 256 Mb. module and see wha happens.- 8)

Similar Messages

Blue screen with the following error SYSTEM SERVICE EXCEPTION (ACPL.sys)

Hi,
I had a blue screen with SYSTEM SERVICE EXCEPTION (ACPL.sys) error message yesterday.
It happened right after the graphic card update was completed. I have an HP Spectre XT laptop with Windows 8 and Intel(R) HD Graphics 4000.
After restart, I noticed that the available free space on my hard disk dropped by 4 GB!
Can you please assist?
Thank you.

We do need the actual DMP file as it contains the only record of the sequence of events leading up to the crash, what drivers were loaded, and what was responsible.
WE NEED AT LEAST TWO DMP FILES TO SPOT TRENDS AND CONFIRM THE DIAGNOSIS.
You may be able to get the DMP files without crashing by booting into safe mode (F8) with networking.
If you are overclocking stop. (chances are if you dont know if you are, you are not)a
To enable us to assist you with your computer's BSOD symptoms, upload the contents of your "\Windows\Minidump" folder. We need at least 2 DMP FILES to diagnose and confirm
The procedure:
* Copy the contents of \Windows\Minidump to another (temporary) location somewhere on your machine.
* Zip up the copy.
* Attach the ZIP archive to your post using the "paperclip" (file attachments) button. (if available on your site, MS doesnt have this)
*Please upload them to a file sharing service like Skydrive or"Rapidshare" and put a link to them in your reply.
Link for how to upload below.
http://www.wikihow.com/Use-SkyDrive
To ensure minidumps are enabled:
* Go to Start, in the Search Box type: sysdm.cpl, press Enter.
* Under the Advanced tab, click on the Startup and Recovery Settings... button.
* Ensure that Automatically restart is unchecked.
* Under the Write Debugging Information header select Small memory dump (256 kB) in the dropdown box (the 256kb varies).
* Ensure that the Small Dump Directory is listed as %systemroot%\Minidump.
* OK your way out.
* Reboot if changes have been made.
Please also run MSinfo32 and upload the output as well.
To run MSinfo32 please go to start>run>MSinfo32
Go to "file" "save" and upload the saved file with the DMPS
System specs are extremely useful so please include whatever you know.
Blue Screen View & Who Crashed are often wrong and should only be used in an emergency
Team Zigzag3143.com
Wanikiya & Dyami--Team Zigzag

Blue screen with error code and I have no recovery disks for HP Pavilion dv6-1260se

I have a HP Pavilion dv6-1260se with factory installed operating system of Vista. When booting up the computer, I receive a blue screen with this error message: STOP: c000021a {Fatal System Error}.
                                                            The verification of a KnownDLL failed. system process terminated unexpectedly with
                                                             a status of 0x0000221 (0x007fb9c0 0x00000000).
                                                             The system has been shut down.
I do not have recovery disks for this computer. I tried to order them but them seem to not be available. This is my daughter's computer. She says she started to have trouble after downloading Frost Wire (music share) and then she removed it. We tried going back to an earlier time and that didn't help and then the blue screen with error message appeared. What do I do now?
This question was solved.
View Solution.

Hi,
Assuming your in the US, recovery discs are available to order for that model here. That may be the best option.
You should also be able to do a recovery without the discs as well. Take a look at this document: Recover Windows Vista Operating System Using HP Recovery, and look for the section Restore the PC to its original condition with the HP Recovery Manager if Windows Vista is not accessible. This should allow you to recover the PC.
R
Although I am an HP Employee, I am speaking for myself and not for HP.

My macbook13in has a blue screen with error code 10813

my macbook 13in has a blue screen with error code 10813

Reinstalling OS X Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Also see:
Reinstall OS X Without Erasing the Drive
OS X Yosemite- Reinstall OS X
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless.

Satellite A350 - Blue screen with error message

When starting windows7, I am getting blue screen with error message 0x0000116.
Can anyone assist please?

It looks like a graphic card driver is a trouble maker.Try to reinstall a graphic card driver in safe mode (f8 on startup). Read this article for information:
http://social.answers.microsoft.com/Forums/en-US/vistahardware/thread/eb584685-6b8b-4ad7-b6cc-ae5ee78095fb
It's for VISTA but should be the same for win 7 too.

Blue screen with error message

Product Name: HP Media Center M7250n Desktop PC
Product #ED842aa-aba
I have been getting a blue screen with error messages that ask if this is the first time i get the error and then at the end it says it is dumping memory. I would like to wipe my harddrive and reinstall XP but my system is out of warrenty and HP won't provide me a recovery CD. What are my options.
This question was solved.
View Solution.

Hi,
You are most welcome.
"I work for HP."
Please click the "White Kudos" star to say thanks for helping.
Please mark "Accept As Solution" if my help has solved your problem.

My C5280 All in one printer flashes a blue screen with error B0248122.

It flashes a blue screen with a different B 8 digit number each time. All the buttons on the front flash yellow. I have to unplug it to turn it off. Occasionally it will say to turn it off and turn it back on, but it rarely solves the problem. This used to be an infrequent problem, only appering occasionally, now it is all the time and am not able to use my printer at all.
Any ideas?

Hello,
This error typically is caused by some issue with the ink delivery system.
Recommend to follow some steps mentioned in this link:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00489814&lc=en&cc=us&dlc=en&product=4083871#N51
Hope this helps.
I work for HP.

Grey screen no apple followed by blue screen with vertical lines. Graphics and logic board replaced 6 months ago. What to do? I held down shift, it gets HOT HOT and makes noises. (for safety mode) followed by a blank grey screen and blue screen

grey screen no apple followed by blue screen with vertical lines. Graphics and logic board replaced <6 months ago. What to do? I held down shift, it gets HOT HOT and makes noises. (for safety mode) followed by a blank grey screen and blue screen. Then tried the other way (sorry, I think it's command alt delete? I don't remember) and it turned from grey (no apple symbol) to blue blank. Then third time, grey followed by blue with vertical lines, not blocky clear lines that you can see if you are close to it.
Thanks for any help!

You have to take the computer to the Apple store to have it checked out.
Genius Bar reservation
http://www.apple.com/retail/geniusbar/
Best.

I have an iMac from 2008. When I start I get gray screen with apple and turning gear. Next blue screen. Then light blue screen with turning gear. Back to blue screen. Now just back and forth blue to light blur

I have an iMac from 2008. When I start I get gray screen with apple and turning gear. Next blue screen. Then light blue screen with turning gear. Back to blue screen. Now just back and forth blue to light blur

Reinstall OS X:
Reinstall OS X without erasing the drive
Do the following:
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install the Combo Updater for the version you prefer from support.apple.com/downloads/.
Reinstalling Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion: Select Reinstall Lion and click on the Continue button.
Note: You can also re-download the Lion installer by opening the App Store application. Hold down the OPTION key and click on the Purchases icon in the toolbar. You should now see an active Install button to the right of your Lion purchase entry. There are situations in which this will not work. For example, if you are already booted into the Lion you originally purchased with your Apple ID or if an instance of the Lion installer is located anywhere on your computer.

Start Up problems, I'm past the grey screen now at blue screen with spinning gears.

Hello I'm working on my Mothers I Mac I believe its a G5,, I do see IMAC 8.1. Today when she turned it on all that came up is a gray screen with a spinning gear. I tried Disk Utility but the HD wasn't being recognized. After a few more trial and errors I finally reset the SMU, Which when I ran disk utility again the hard drive was recognized. I verified it and it said HD seems to be ok. I restarted and sure enough I made it past the gray screen but now Its stuck on a blue screen with a spinning gear. It looks almost like the login screen is trying to load but never comes up. Every 10-20 sec it flickers and the gear just keeps spinning. The fan was never coming on, not until I reset the SMU so I'm currently letting it cool down. Hoping this helps. Should I run the disk utility again and click the repair hd, even though no errors were listed when I verified it.

An iMac 8,1 is an Intel model. Are you sure it's a G5 (not an Intel model?)
Perhaps you should try reinstalling OS X:
How to Perform an Archive and Install
An Archive and Install will NOT erase your hard drive, but you must have sufficient free space for a second OS X installation which could be from 3-9 GBs depending upon the version of OS X and selected installation options. The free space requirement is over and above normal free space requirements which should be at least 6-10 GBs. Read all the linked references carefully before proceeding.
1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update.

My macbook pro freezes and then displays a blue screen with black stripes... do you know what's wrong with it?

My macbook pro freezes and then displays a blue screen with black stripes... do you know what's wrong with it?
I have a two and half year mac book pro... I've had some issues with the screen looking scrambled when I quit certain applications, but now it's turned into something worse. I'll be working on my computer and the thing will freeze. When I force restart, the first screen, the apple logo, will be a blue tint and won't boot up normally. Then I try safe mood and it will then boot just fine. But there are blue stripes on my screen. The screen alternates from a blue tint to normal and if the computer freezes again the screen will become completely blue with black stripes. I haven't tried reinstalling my software because I don't have the startup discs that came with my computer. If I was sure that would fix it I would purchase them, but if it's a hardware issue I'm afraid that I'm screwed. I've been able to successfully get the blue off my screen by putting it to sleep and then waking it up, but that's not working well anymore either.
Does anyone else have experience with this? Is it the firmware or what? I have a MacBook Pro from early 2011 and I'm running Mac OS X 10.6.8.
Please help... Thanks!

I just experienced this exact same issue with my early 2011 15" macbook pro. Since like a month after purchasing it I had issues with the screen randomly going dark on me. I sent it in for repair inder waranty they replaced the gpu and logic board but I continued to have the same issues with the screen randomly going black sometimes I would need to reboot it in order to get the screen to go back on but it happened so infrequently and I used the computer for school so disnt find the time to resend it in to apple. Just last night the screen started to display the blue screen with black verticle lines on it. I called apple and explained to them the issues that had been ongoing since I purchased the laptop but they said because I was now outside of warantee that any repairs at thia point wouldn't be covered. Fml so glad I spent 2200 on this future proof macbook pro what a joke my sister purchased a toshiba laptop for 300 4 years ago and it still running like a champ. I loved my macbook but at the price I paid I expect it to last longer than 2 years before leaving me high and dry. *** apple??

Unmountable boot volume error blue screen

I have a toshibia laptop that has crashed, I am eventually getting the unmountable_boot_volume error blue screen, the recovery disks that i ordered will not work, just disk 1 loads windows file then goes to a black screen with the cursor pointer, computer repair does the same thing, os is windows 7 satellite c655d-s5120 64 bit the bios does show the hard drive name and the boot log is showing the last driver loaded is windows/system 32/drivers/atipcie.sys, can I order a recovery for the windows 7 or is there any other ideas to fix this?not sure why this is happening

If you've already ordered a set of recovery discs, you probably don't need to order another one. While it's possible that the discs are bad (and maybe you should call customer support just to see what they say), it's also possible that you have a hardware failure of some sort.
- Peter

STOP ERROR - Blue Screen - on Lap Top - Fixed, tear1, support rocks!!!!!!

New Iphone, and new laptop, installed itunes Noprob,
Hooked Iphone to usb laptop found Iphone and installed and activated Noprob,All systems go, I am loving it.
I then ejected my Iphone and hooked up my Ipod to transfer purchesed music and shows transfered Noprob, so I eject my Ipod to hook up my Iphone to put my purchesed music on it.
THATS when it happened.
STOP ERROR- Blue screen,cpu restarted on its own.
I deleted itunes and I deleted camradrives, printer drivers.
I tried allmost everything and still got the same blue screen.
To make a long story shorter I called apple talked to the (now this is important) Iphone/Itunes department they are seperate but have a div. that works as one but you have to ask for the department that takes care of both or you will talk to both or 3 or 4 other dept.
Tear 1 Support had me do a soft reset on my phone it did not work so I backed up my phone # and they showed me how to do a compleate reset and it worked.
I have been Error and blue screen free for 2 days and I feel very posative about the future with my relationship between my cpu and my phone
Thank you for your time.
I hope I help some one I found no relief here with my problem but its a great resource for information
GOD BLESS TEAR 1 SUPPORT YOUR TEAM ROCK'S
Pro-Iceman
Anacotes,Wa

You don't need to upgrade your software. But if you're struggling with Spry, IMO you should cut your losses and switch to something better for the longrun.
If you have a budget to work with, I highly recommend Project Seven's Pop-Menu Magic 3. It's easy to use in DW CS4, 5, 6 or CC. More importantly, it's bullet proof and works in all devices.
Pop-Menu Magic3 by PVII (commercial DW extension)
http://www.projectseven.com/products/menusystems/pmm3/index.htm
If you don't have a budget to work with, you can roll your own menus with jQuery plugins. A bit more effort on your part, but they perform better than Spry.
jQuery Superfish
http://users.tpg.com.au/j_birch/plugins/superfish/
jQuery MegaMenu2
DEMO:
http://www.geektantra.com/projects/jquery-megamenu-2/
DOWNLOAD:
http://code.google.com/p/jquery-megamenu/
Nancy O.

Stuck on blue screen with clouds rainbow, floated ...

As it says.
When I start Skype, it goes straight to a blue screen with blue clouds and a green rainbow at the bottom. I get no prompt to login. I have followed various guides, such as renaming login to login1, deleting login, restarting the computer, uninstalling then installed skype (which gets me an error code 2734 I think), uninstalled and installed Internet Explorer. I have run windows update and everything is up to date. I also followed the advise in the floated topic, and even after using Command Prompt (which was not in Accessories folder, had to search cmd to find it) and restarting, the 'click this button' does not work.
Skype was working fine on Sunday, and now it is broken. The only thing I have done in the meantime is run a repair tool for Windows Media Player as a game I installed required it to play in game music.
EDIT: I use Windows 7.
Solved!
Go to Solution.

Scripting in Internet Explorer might be disabled by an Antivirus software. What Antivirus software is installed on your computer?
Meanwhile you can try the “legacylogin” workaround, which should enable login to Skype using the old legacy login window. However, you will not be able to login using Microsoft account (email address).
Quit Skype. Make sure that you don’t see any Skype.exe processes in Windows Task Manager. If necessary, then stop these processes.
Open this folder on your computer:
C:\Program Files (x86)\Skype\Phone\
You should see there the Skype application file (Skype.exe). Right click on the Skype.exe file and select: Send to – Desktop (create shortcut). Right click on the newly created shortcut and select Properties and then the Shortcut tab. In the Target field you will see now:
"C:\Program Files (x86)\Skype\Phone\Skype.exe"
Click with your mouse on the text in the Target field and move your curser one space after the last quotation sign and add the text /legacylogin. The text in the Target field should now read:
"C:\Program Files (x86)\Skype\Phone\Skype.exe" /legacylogin
Click OK to save the changes. Start Skype using this new shortcut. Can you now login to Skype?

Upon start I get a blue screen with B817977E

HP Photosmart C8180-all in one. I use a Mac Pro laptop. I updated the driver 4 years ago to my Mac. This year while in Fl I went to turn on the printer and I get a blue screen with the number B817988E on the screen. I haver tried re booting by unplugging both ends of the printer cord, but this does not work. Holding the on button in does not work. If it does come on My computer connects wirelessly, but does not print. Then it will not shut down.

lonnlar,
This article should help resolve the error you are getting:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03081973&cc=us&dlc=en&lc=en
Give the steps a try and let us know if it helps.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Error blue screen with KM2M Combo Board

Similar Messages

Maybe you are looking for