Error browsing Info Object Editor( RSD1)

Hi Gurus,
        While browsing Info object Editor, when I come to middle of list where all 0MATERIAL** objects are listed, I get error message with 'STOP' sign saying "Setting for material number conversion not found" and system throws me out. Any help in this regard?
Thanks and Regards,
Anil

run transaction OMSL.
Create an entry for MATCONV in the overview screen.
Double click on this line and set the length parameter for MATCONV.
the same transaction exists in the r/3 OLTP system compare the 2 systems to set the right values in the details screen in BW.
Rishi

Similar Messages

  • Issue with Info Object Transport after changing Data Type

    Hi Experts,
    We have a DSO which is running past 5 years. And recently(3 days back) we added new fields into that DSO. Delta loaded for last three days and new info object (Say XXX) data populated into DSO.
    Now the problem is, We identified that, info object data type is not correct. We used data type NUMC  instead of CHAR.So Character information is missing for that field.
    Example:
    Data from ECC: ABC123
    Data Loaded to DSO: 123 (Missed character ABC)
    So we deleted data from DSO and changed the info object data type in Development system.
    And also I have deleted only last three days delta records from DSO and transported my info object to Production. But its giving error as: Info object contains data in DSO".
    But that info object field is empty in DSO. I have already deleted last three days delta.
    Do I need to Delete all 5 years data from DSO to change the data type of recently added new info object ?
    Please give me your solutions and ideas to solve this issue.
    Thank you,
    Best Regards,
    Santhosh

    Hi Raman,
    Thank you for your answer.
    When I changed the data type of info object in Dev, I deleted the content of DSO. And same thing transported to QA as well. Before importing changed info object, I just deleted the content of DSO from QA. So transport done successfully QA.
    But in Production we have a history of past 5 years. So I cant delete all contents of DSO.
    So just deleted only the delta request's which contains data for that info object(3 days back, we moved that info object(NUMC data type) to production,So last 3 days delta only loaded for that info object). And tried to transport it. But it was failed. I am sure we need to drop all data from DSO, if I am interested to go with same info object.
    I have some comments on your first approach,
    1. If we delete info objects from Dev DSO and transport to Production will give transport failure, Why because, my previous transports errors clearly saying that info object contains data in DSO . So it wont allow to remove that info object from DSO.
    2.We are using same info object technical name in BO Data federator also. So if we change add new info objects again we need to make changes with BO as well. I am thinking this point as my last option if i cant find any other solution.
    Thank you.
    Best Regards.

  • Info object installation error

    Dear Experts,
      i am having error while upgradation
    2EER7000 "InfoObject 0APO_HOUNIT is not" "consistent - activate it" " " " "
    2EER7000 "InfoObject 0APO_HUNIT is not" "consistent - activate it" " " " "
    2EER7000 "InfoObject 0APO_IUNIT is not" "consistent - activate it" " " " "
    2EER7000 "InfoObject 0APO_LADGR is not" "consistent - activate it" " " " "
    2EER7000 "InfoObject 0APO_LGKND is not" "consistent - activate it" " " " "
    2EER7000 "InfoObject 0APO_LGRAD is not" "consistent - activate it" " " " "
    2EER7000 "InfoObject 0APO_LINENO is not" "consistent - activate it" " " " "
    2EER7000 "InfoObject 0APO_LOCNOF is not" "consistent - activate it" " " " "
    2EER7000 "InfoObject 0APO_LOCTYF is not" "consistent - activate it" " " " "
    2EER7000 "InfoObject 0APO_LPPRIO is not" "consistent - activate it" " " " "
    2EER7000 "InfoObject 0APO_LPROD is not" "consistent - activate it" " " " "
    when i luking for IO 0APO_LGKND, 0APO_LOCTYF its thr in active mode but in upgradation its giving error.
    please tell how to install
    InfoObject 0APO_HOUNIT
    InfoObject 0APO_HUNIT
    InfoObject 0APO_IUNIT
    m trying to install from BI content but its not coming in info object tab.
    Please help
    Ankit

    Hi Ankit,
    For these infoobjects, in Tocde RSD1, do the version comparison between active and content version.
    It might reveal what is the inconsistency.
    Thanks,
    Krishnan

  • Error while creating info object

    error while creating info object a character
    Info object may be a maximum of  000060 digits...... what would be the error?
    Thanks ALL

    Hi,
    The maximum length supported by one CHAR type infoobject is 60. Check whether you have assigned more.
    If you have to load more length ( more than 60) split the total thing into different infoobjects. Create different infoobjects and split the total thing into them - like 1st 60 char in 1st infoobject, char 61-120 in 2nd infoobject and so on. Then you can again concatenate them.
    Thanks,
    Indrashis

  • Error while activating the info object.

    Hi,
    While activating one of the info objects, i am getting the following error message:
    Characteristic 0BP_GRP: Cannot switch off InfoProvider property
    Message no. R7B289
    Diagnosis
    The characteristic receives master data from other objects (for example, transformations or update rules). Therefore it is necessary to select the characteristic as an InfoProvider.
    Procedure
    If you want to deselect the Characteristic Is InfoProvider indicator, delete the corresponding objects in the data flow.
    Thanks and Regards
    Niren.

    Hi Niren,
    Check the below thread..
    Howto Remove 0Employee Char from my InfoArea
    Hope it helps..
    Regards,
    Ramki.

  • Error in char. Info Object

    I have created the char . info object and in attributes gave the same char. and made it as navigational attribute. when i am trying to activate the info objecty i am getting the error
        "Name of the Characteristic is Reserved".
    Can nyone plz let me know how to resolve it.

    Hi,
       Could you be a bit clearer? If you created a chrarcteristic infoobject and added the same in the attributes then its not possible and wrong.
    An attribute must be a different infoobject.
    For eg.
    CHAR        ATTr
    MATID       MATTYPE
    You cannot have
    MATID as the attribute of MATID.
    Regards.

  • Error in transporting info-object

    Hello Experts,
    We need to a import an info-object from Quality to Prod.
    From Dev to Quality the transport was successful, but while transporting from
    quality to prod we are getting the following errors:
    Changes cannot be made, display user only
    And as a result the info-object and hence the info-object,transfer rules/Transformation etc are
    now inactive in the prod. enviornment.
    Could anyone advice on what may be the source of this error??
    Thanx and Regards
    Priyanka

    Hi Priyanka,
    Pls check below threads, may be it will helpfull to you.
    https://forums.sdn.sap.com/click.jspa?searchID=21045654&messageID=6758914
    https://forums.sdn.sap.com/click.jspa?searchID=21045654&messageID=6720353
    https://forums.sdn.sap.com/click.jspa?searchID=21045654&messageID=6407281
    https://forums.sdn.sap.com/click.jspa?searchID=21045906&messageID=6758914
    https://forums.sdn.sap.com/click.jspa?searchID=21045906&messageID=6407210
    Thanks & Regards,
    Ramnaresh .P.

  • Error in transpoting info object

    Hello,
    Need help to solve this please!
    I am getting an error while tranporting an info object!
    Error 1 with function module RSDRX_FILL_INITIAL_PQTABLE (Fill Master Data)
    Message no. R7195
    Diagnosis
    Possible causes:
    Function module DB_CREATE_TABLE
    There is not enough room in the table space.
    Procedure
    In this case, check the logs on the database and extend the table space if it is too small.
    Help me please!
    Regards
    RAm

    Hello,
    Help me to solve this !
    I cant transport the info object !
    It says:
    Function module DB_CREATE_TABLE
    There is not enough room in the table space.
    Procedure
    In this case, check the logs on the database and extend the table space if it is too small.
    Help me!!
    Regards
    Ram

  • Error while creating Info Object in Info object catelog

    Hi experts,
    I'm making few info object in info object catelog but while activating system giving error mesage as "Error when generating master data routines"
    can any one tell what's the problem and what needs to be done.
    Sumantra

    Hi
    let me know weather r u using any reference object which contain the routinee.
    regards,
    chandra.

  • Error when assigning SID while uploading text in the info-object of the DSO

    Hi
    I have a scenario where I need to extract a char 60 field from R/3 in the DSO.
    I have created the info-object which is char 60 which has the master data text activated.
    In the DSO transformation I have mapped it to the R/3 field.
    While activating the data in DSO its giving the error message
    'Value '20 per action plan' (hex. '32302070657220616374696F6E20706C616E') of characteristic'
    'Error when assigning SID: Action VAL_SID_CONVERT InfoObject ZRMSD '
    How to overcome this issue.
    Please advise.
    Thanks in advance.

    Change the InfoObject for this text so that it will allow lowercase letters. To do this, go into Change mode on the InfoObject, go to the General tab, check the Lowercase letters checkbox and activate the InfoObject. After this has been activated, you can then restart your process and this SID violation error should no longer be thrown for this.
    If you don't want to do this, then you can use the TOUPPER formula in the Characteristic Routine, in the Transformation, to change the value of this field contents to uppercase. This can also be done by using an ABAP routine like this:
    TRANSLATE column TO UPPER CASE.
    Edited by: Dennis Scoville on Nov 3, 2009 9:55 AM

  • Error in Transport the info object

    Dear all,
    i am trying to transport  the info object 0CM_CTAR
    during transpot i am getting the error as
    Characteristic 0CM_CTAR: Unit 0UNIT_DIM no allowed in compounding
    but i checked in development i  not got any error but when i am trasport iam getting error.
    Regards,
    siva.

    HEllo,
    Please see these OSS Notes
    1139547 - Transport of InfoObjects RC = 8
    1100575 - InfoObjects: Using units in compounding
    The other way is to use a Z* object referenced to needed unit object  in the compouding,
    Regards,
    Shashank

  • Error while adding an Info Object in an Info Cube

    Hi Experts,
    I am trying to add one InfoObject to my info cube but I get following error:
    "InfoObject GSMBUHR is only allowed as an attribute (not in InfoCubes)"
    The Data Type of the InfoObject is TIMS.
    The Reference Char. for it is 0TIME
    And in other Properties Attribute only is checked.
    but its not maintained as an attribute of any InfoObject as I checked in where used list for this InfoObject.
    Please let me know to add it in cube.
    Regards
    Shubh Karan

    hi,
    u will not be able to add an 'attribute only' info object as characteristic in the cube
    it can only be added as an attribute in another master data characteristic. so if u still want  to include this info object , u need to unchecck 'attribute only' flag.
    hope it helps
    Regards,
    Rathy

  • Error using Object Editor pattern

    Hi Gurus!!!
    I am creating a composite application using entity services created in Netweaver Developer Studio and UI patterns, in this case the Object Editor pattern. The problem is when I test the Object Editor configuration entering data on it, this shows an error that says "Cannot create" and the data is not saved!! I checked the system log and throws the following line:
    #1.5#02004C4F4F5000690000001900000E4C0004518C574879F5#1215563569010
    #com.sap.caf.ui.utils.wd.ResourceUtils#sap.com/tc~wd~dispwda
    #com.sap.caf.ui.utils.wd.ResourceUtils.String getProperty(String, IWDDeployableObject)
    #msanchez#201##n/a##e61557e04d4a11ddc9d702004c4f4f50
    #SAPEngine_Application_Thread[impl:3]_27
    ##0#0#Warning#1#/Applications/Applications/CAF#Java##
    #Invalid property name specified: "objecteditor.maxtabno"
    [EXCEPTION]
    {0}#1#com.sap.tc.webdynpro.services.sal.config.api.WDInvalidConfigParameterException:
    Parameter 'objecteditor.maxtabno' not found in configuration 'sap.com/caf~UI~ptn~objecteditor/default'.
    I understand it says that there is a parameter that is sent to the configuration but such parameter doesn´t exist on it.
    Please help!!! points guaranteed!!

    Hi, I tested the application using the CAF Runtime Configuration service test and it was an authorization Issue. The entity was set to check permissions. I disabled this in NWDS and it works fine now

  • Error,Info Object 0CHNGID is requested.

    Hi All,
    I am new to BW/BI, and i am trying to upload data from flat file to BI system; I have uploaded the data successfully into PSA and then into InfoCube; But when i am trying to display the data in the cube i got some 4 errors, i managed to remove the 3 errors by successfully re-importing the  missing infobjects from BI Content.
    How ever i was not able to overcome this error; it says, "Info Object 0CHNGID is requested", i tried to search this info object in the BI System so that i can also re-import the same but it is not available.
    So can anyone of you assist me to overcome this issue.
    Thanks,
    Raghu

    Hi raghavendra...
    Its there in the Business content check it. i had checked it just now.
    Can u tell me how you are checking the 0CHNGID?
    Goto RSA1 -- BI Content -- object types -- infoobject -- search for info object -- and install it.
    Regards
    KP

  • System error - User not authorized to access requested Info Object!

    Hi, Experts,
    I have a user ID begin with S***, but when I click some links, the following message shows:
    "System error - User not authorized to access requested Info Object!"
    How could I have authorization to see these links?
    Thanks!
    Lorrie

    Hi Lorrie,
    If you are a superuser, you should not get this error.
    If not, you can not change any autohorizations.
    Check it out.  For your job, you have to be a super user.
    Thanks,
    Gordon

Maybe you are looking for