Error BSOD when installing SATA drive on 1 & 2 (RAID 0 on 3/4 AOK)

Hi,
I have successfully installed Win XP Pro on 3 & 4, & wanted to install a Maxtor 120GB SATA drive on 1 or 2. When I do this, & enable bios on 1 & 2, windows loads then prompts for a reboot due to the install of new hardware. After posting & whilst Win is starting, it BSOD with IRQ_NOT_EQUAL_OR_LESS etc. I shut down computer, remove SATA drive, alter settings back to before in Bios & select last successful settings & computer reboots AOK. This happens on both SATA 1 & 2.
Is there a way of having the SATA storage disk on 1 or 2. Is it best to hot install it with the O/S up, after having changed BIOS settings to enable SATA 1 & 2?

To answer my own question, while computer is turned off, (after taking anti-static precautions) plug power to sata drive.
Connect sata data cable to M/board, do not connect sata data cable to drive.
Enable sata 1 & 2 in bios, boot to windows.
Drivers are installed for device.
Then carefully plug sata data cable into sata drive.
Windows detects new hardware.
Enter Disk Management & partition/format to your hearts content.
Thanks to those who had a look at my post. Hope this helps someone else.

Similar Messages

Officejet 4500 wireless printer keep geeting error message when installing the driver

hi can anyone help im trying to install my officejet printer 4500 g510 n-z driver from the hp website and i keep getting an error message and i have no idea how to stop getting this message as i have tried a few times to install the drive and keep gettimg the same message im running windows 8.1 if tht helps
thanks john

Hello jono13,
Welcome to the HP Forums!
I understand you're receiving an error message when installing the Officejet 4500 software. What is the exact error message on your computer? Could you send a screen shot of your exact error?
How will you be connecting this printer? Wireless or USB?
Please verify this information and I will assist you further.
Looking forward to hearing from you.
I worked on behalf of HP.

Windows update error 800f0246 when installing printer driver

I have Win 7 pro 64 bit and an HP3520 printer. HP site says a Windows 7 driver is available via windows update. When I go into Windows update, the drivers shows up under optional downloads. When I try to download and install it it fails with error code 800f0246. All other updates install fine. I tried multiple times with the same error.
When I go into device manager the printer is listed under other devices with an icon indicating a driver issue. When I try to update the driver it finds the downloaded driver that Windows update downloaded. I select it and it fails.
I have Windows 7 beta still on my laptop and the printer driver installs from windows update just fine.
Any ideas?

No go. Uninstalled, rebooted, tried to reinstall again, still failed. Fails when the printer is disconnected as well. The HP site does not have a driver for manual install. Any links for a driver lead to here: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01874792&lc=en&dlc=en&cc=us&lang=en&product=305968 Those steps do not work because the driver in windows update fails to install.

Why Do I Get Error 1722 When Installing the Driver CD with Windows XP?

I'm having problem to install the driver CD, it shows a message saying that occured an error 1722
A tried to do what you said on this topic: http://digital.ni.com/public.nsf/websearch/34ABE6F20DD4981D86256E8600752DFE?OpenDocument
But on step 10, when a I tried to Select the property "Replace permission entries on all child objects with entries shown here that apply to child objects" and aply, the PC showed an error saying that de Registry Editor cannot define the security of that key selected or one of its sub-keys.
I tried to install after this and showed de 1722 error's message again.
Solved!
Go to Solution.

Have you also tried disabling the anti virus?

"page fault in nonpaged area" BSOD when installing latest driver for M476dw

I just purchased a Color Laserjet MFP M476dw for use on my wireless network.
I downloaded the latest version of the driver suite from HP: LJPro-MFP-M476-Full-Solution-13302
for my OS Windows 8.1 / 64-bit listed as version: 10.0.13302.320 --   25 Sep 2014
I was logged in with a local Administrator level account for the install
I launched the install, the printer was discovered and s/w install went along fine until it got to the point of printing the test page ... the test page printed but as the page was printing the computer locked with its (first ever) BOSD:
"page fault in nonpaged area"
I powered down, rebooted and after login got an error message that said:
"HP Printer status and alerts has encountered and error and can not recover ... please restart ...
windows versoin: Win32NT 6.2.9200.0
HP Printer Status and Alerts version: 070.040.00169
I rebooted again and got the same error....
I launched the uninstaller program with the hopes of just uninstalling the printer status s/w and then reinstalling it,
but the uninstaller appears to have uninstalled the entire suite of s/w.....
Before I go at this again, I thought I'd ask for suggestions............
I've owned this laptop for 6 months, and it has been rocksolid ... this is the first BSOD I've experienced....
Thanks for any help!
This question was solved.
View Solution.

so .... having received no suggestions I figured I'd try re-installing withOUT installing the status monitor s/w option.
After unsellectin that, the rest of the driver package installed, and test page printed then I got a DIFFERENT BSod:
kernel_security_check_failure
Event log says:
The computer has rebooted from a bugcheck. The bugcheck was: 0x00000139 (0x0000000000000003, 0xffffd000beab77a0, 0xffffd000beab76f8, 0x0000000000000000). A dump was saved in: C:\windows\MEMORY.DMP. Report Id: 031715-9734-01.
Then next:
HPLaserJet Service:
Service cannot be started. System.BadImageFormatException: Could not load file or assembly 'HPTools, Version=8.12.1454.0, Culture=neutral, PublicKeyToken=null' or one of its dependencies. The module was expected to contain an assembly manifest.
File name: 'HPTools, Version=8.12.1454.0, Culture=neutral, PublicKeyToken=null'
   at HPLaserJetService.HPLaserJetService.OnStart(String[] args)
   at System.ServiceProcess.ServiceBase.ServiceQueuedMainCallback(Object state)
WRN: Assembly binding logging is turned OFF.
To enable assembly bind failure logging, set the registry value [HKLM\Software\Microsoft\Fusion!EnableLog] (DWORD) to 1.
Note: There is some performance penalty associated with assembly bind failure logging.
To turn this feature off, remove the registry value [HKLM\Software\Microsoft\Fusion!EnableLog].
the printer icon shows up in printers & devices, but will not print a test page..........
So ............ Uninstalled yet again, then rebooted and installed JUST the basic printer & scan drivers,
(i.e. the two "required" elements of the package)....
This works, so at least I can use my printer while I try to figure out the rest of this stuff..........
I'm pretty disappointed here ............
Any help would be much appreciated.............

Do you HAVE to hit F6 when installing SATA Drives?

This has been asked alot I'm sure, but do you have to hit F6 during XP installation? I'm using a Maxtor 120 SATA drive

Short answer: No
long answer : no because What if I don't want a RAID?

Access Denied Error Opens when Installing HP Monitor Software (Windows 7)

im getting the following error trying to upgrade my screen driver.
"Access Denied Error Opens when Installing HP Monitor Software (Windows 7)"
I found this error in the help area but it doesnt address the problem, it simply describes the device manager instalation procedure, which I am using , and which results in the error.

Hi debgibson,
What is the monitor model number and what is the PC model number?
...an HP employee just trying to help where I can, but not speaking on behalf of HP.

Error 1305 when installing LabVIEW 7.1 app built with app builder

I have built an executable with installer from LabVIEW 7.1 app builder. The app installs/works fine, however 1 user reported 'Error 1305' when installing the app from a DOS subset on a WinXP machine. For example, a virtual drive is created using the DOS 'subst' command (see http://www.easydos.com/subst.html for more info), e.g. 'subst z: c:\temp'. Now when running z:\setup.exe, the error 1305 is encountered. If the same app is run from c:, e.g. 'c:\temp\setup.exe', it works fine. Is this a bug in the installer, or in the OS...?

Greetings,
This is an architectural issue with the Microsoft Windows Installer and Windows, and will occur with any MSI (not just those from the app builder). Under XP, a MSI cannot install from OR install to a location created by the "subst" command. My understanding of why is that installSequence runs in the context of the MSI engine, which is running as "system" user. But the subst command is a per-user setting (local to your account) so the MSI engine doesn't see it.
The only workaround is to run the MSI from a non-subst drive, or instead use network file shares (you can simulate what "subst" does by mounting an exported file share from the same machine).
Regards,
- WesW / NI

"dependency cycle detected" warnings when installing nvidia driver

I'm getting two "dependency cycle detected" warnings when installing nvidia driver on a fresh arch system:
xorg-server will be installed before its nvidia-libgl dependency
harfbuzz will be installed before its freetype2 dependency
Is that normal?

It's not 'normal' but if everything is working fine, no need to worry. They're just warnings, not errors.

Error message when installing Flash Player : List of actions not found

I get an error message when trying to install Flash Player.
I use Windows 64 bit with Internet Explorer 64x.
I'm able to download, the installation starts but it stops before completing.
I get this error message (loosely transalated) :
Installation encountered errors
List of actions not found
How can I fix this ?
Thank you
Annie

I solved my problem by installing the Flash Player from home.
The network security at work prevented me from completing installation.
Thanks for your help.
Annie
2012/9/26 Pat Willener <[email protected]>
Re: Error message when installing Flash Player : List of actions not
found created by Pat Willener <http://forums.adobe.com/people/pwillener>in
Installing Flash Player - View the full discussion<http://forums.adobe.com/message/4728064#4728064

Error message when installing quicktime/itunes

PLease help! I continue to get this error message when trying to install quicktime HKEY_LOCAL-MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\Quicktim e.
What should I do? In lamens terms please, not very computer literate.

an error message appears saying that a program required for the installation is missing
In the course of your troubleshooting to date, have you tried the following user tip with that one?
"There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows

Error message when installing, modifying or repairing Adobe Reader

Error 1406. Could not write value Installed to key HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run\Opti onalComponents\IMAIL.
Verify that you have sufficient access to that key or contact you support personnel.
Error 1406. Could not write value Installed to key HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run\Opti onalComponents\MAPI.
Verify that you have sufficient access to that key or contact you support personnel.
Error 1406. Could not write value Installed to key HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run\Opti onalComponents\MSFS.
Verify that you have sufficient access to that key or contact you support personnel.
Error 1402. Could not open key: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run\Opti onalComponents\IMAIL. System error 1009.
Verify that you have sufficient access to that key, or contact your support personnel.
Error 1402. Could not open key: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run\Opti onalComponents\MAPI. System error 1009.
Verify that you have sufficient access to that key, or contact your support personnel.
Error 1402. Could not open key: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run\Opti onalComponents\MSFS. System error 1009.
Verify that you have sufficient access to that key, or contact your support personnel.
Error 1402. Could not open key: <Keyname>. System error 1009.
Verify that you have sufficient access to that key, or contact your support personnel.
Error 1406. Could not write value <Valuename> to key <Keyname>.
Verify that you have sufficient access to that key or contact you support personnel.
Please see: Error message when installing, modifying or repairing Adobe Reader

Thank You phoney01.. this did indeed work perfectly for me as well!

I am getting an error message when installing Photoshop cs3 extended on my Mac!!!! Please help

Error message when installing Photoshop cs3 extended on my Mac!!!! PLEASE HELP!!!

check compatibility first, http://roaringapps.com/apps:table

Error message when installing Digital Edition

I am getting the following error log when installing digital edition. I had the old verion of DE installed and it was working fine. When I was asked to upgrade I started to get errors to install the new version.
Output folder: C:\Program Files\Adobe\Adobe Digital Editions
Download digitaleditions_win.zip to C:\DOCUME~1\TICOPE~1\LOCALS~1\Temp
Could not load: C:\DOCUME~1\TICOPE~1\LOCALS~1\Temp\nsgF.tmp\Sha1.dll
Corrupted package digitaleditions_win.zip
Did somebody has the same problem? How did you fix that?
Thanks,
Adriano

When I try to install adobe digital editions I get a message saying: Directorio de salida: C:\Program Files\Adobe\Adobe Digital Editions Descargar digitaleditions_win.zip en C:\Users\Usuari@\AppData\Local\Temp digitaleditions_win.zip del paquete está dañado, wich means "the package is damage"
I,ve tryed lots of time and there is no way. Could anyone help me!

Show error message when Install SM7 in step 4 execute Service

Hi All
Show error message when Install SM7 in step 4 execute Service.
Anyone can help me fix the problem pls!
Regards
Kevin
Start the setup task 'Determination of SID and InstanceNumber for Diagnostics agent' ...
Information for SAPInst:
sid=SMD
number=98
2009.06.08 11:16:59
Task completed with status 0
INFO 2009-06-08 11:17:00.0
Execute step initSystem of component |NW_Onehost|ind|ind|ind|ind|0|0|SA_Integrated|ind|ind|ind|ind|7|0
INFO[E] 2009-06-08 11:17:00.250
FSL-02077 File system export (share) saploc does not exist.
INFO 2009-06-08 11:17:00.484
Execute step initED of component |NW_Onehost|ind|ind|ind|ind|0|0|SA_Integrated|ind|ind|ind|ind|7|0
INFO[E] 2009-06-08 11:17:00.718
FSL-02077 File system export (share) saploc does not exist.
INFO[E] 2009-06-08 11:17:05.265
FSL-01027 Account user="hk-is-000818\smdadm" does not exist.
INFO 2009-06-08 11:17:05.609
Execute step createOSUser of component |NW_Onehost|ind|ind|ind|ind|0|0|SA_Integrated|ind|ind|ind|ind|7|0
INFO[E] 2009-06-08 11:17:05.875
FSL-02077 File system export (share) saploc does not exist.
INFO[E] 2009-06-08 11:17:08.187
FSL-01027 Account user="hk-is-000818\smdadm" does not exist.
INFO[E] 2009-06-08 11:17:10.531
FSL-01027 Account user="hk-is-000818\smdadm" does not exist.
INFO[E] 2009-06-08 11:17:12.859
FSL-01027 Account user="hk-is-000818\smdadm" does not exist.
INFO[E] 2009-06-08 11:17:15.156
FSL-01027 Account user="hk-is-000818\smdadm" does not exist.
WARNING[E] 2009-06-08 11:17:20.281
FSL-01002 Unable to create account hk-is-000818\smdadm. HRESULT=0x80005009
INFO 2009-06-08 11:17:20.562
Execute step initOS400Parameters of component |NW_Onehost|ind|ind|ind|ind|0|0|SA_Integrated|ind|ind|ind|ind|7|0
INFO 2009-06-08 11:17:20.781
Execute step initING_DI of component |NW_Onehost|ind|ind|ind|ind|0|0|SA_Integrated|ind|ind|ind|ind|7|0
INFO 2009-06-08 11:17:22.312
Creating file C:\Program Files\sapinst_instdir\SOLMAN\SYSTEM\ORA\CENTRAL\AS\summary.html.
INFO 2009-06-08 11:17:28.828
Execute step ntpatch of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_First_Steps|ind|ind|ind|ind|1|0|NW_Update_DLLs|ind|ind|ind|ind|3|0
INFO 2009-06-08 11:17:29.093
Node C:\WINDOWS\system32 already exists.
INFO 2009-06-08 11:17:31.0
Execute step runChecksStep of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|PrerequisiteCheckerDialogs|ind|ind|ind|ind|3|0
INFO 2009-06-08 11:17:32.390
Execute step createAccounts of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_Users_Create_Do|ind|ind|ind|ind|5|0
INFO 2009-06-08 11:17:33.171
Nothing to do. User privileges are an empty string.
INFO 2009-06-08 11:17:33.203
Nothing to do. User privileges are an empty string.
INFO 2009-06-08 11:17:33.250
Nothing to do. User privileges are an empty string.
INFO 2009-06-08 11:17:33.281
Nothing to do. User privileges are an empty string.
INFO 2009-06-08 11:17:33.328
Nothing to do. User privileges are an empty string.
INFO 2009-06-08 11:17:33.375
Nothing to do. User privileges are an empty string.
INFO 2009-06-08 11:17:33.421
Nothing to do. User privileges are an empty string.
INFO[E] 2009-06-08 11:17:35.703
FSL-01027 Account user="hk-is-000818\SAPServicePAS" does not exist.
WARNING[E] 2009-06-08 11:17:40.796
FSL-01002 Unable to create account hk-is-000818\SAPServicePAS. HRESULT=0x80005009
WARNING[E] 2009-06-08 11:17:40.796
MUT-03025 Caught ESyException in Modulecall: ESAPinstException: error text undefined.
ERROR 2009-06-08 11:17:40.843
FCO-00011 The step createAccounts with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_Users_Create_Do|ind|ind|ind|ind|5|0|createAccounts was executed with status ERROR .

hi Subhash
tkx it work
but I got another error when install afterwards. do u know how can fix , many tkx
Kevin
WARNING 2009-06-09 20:39:02.421
Execution of the command "D:\oracle\product\10.2.0\db_1\bin\lsnrctl start LISTENER" finished with return code 1. Output:
WARNING[E] 2009-06-09 20:39:02.437
CJS-00095 Error return code. DIAGNOSIS: Return code 1 of executable D:\oracle\product\10.2.0\db_1/bin/lsnrctl indicates an error. SOLUTION: See log file lsnrctl.log for details.
WARNING[E] 2009-06-09 20:39:02.437
CJS-00095 Error return code. DIAGNOSIS: Return code 1 of executable D:\oracle\product\10.2.0\db_1/bin/lsnrctl indicates an error. SOLUTION: See log file lsnrctl.log for details.
ERROR 2009-06-09 20:39:02.468
FCO-00011 The step StartListener with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_OraDBCheck|ind|ind|ind|ind|0|0|NW_OraDBMain|ind|ind|ind|ind|0|0|NW_OraDBStd|ind|ind|ind|ind|3|0|NW_OraClient|ind|ind|ind|ind|3|0|NW_OraNetworkSrv|ind|ind|ind|ind|1|0|StartListener was executed with status ERROR .

Error BSOD when installing SATA drive on 1 & 2 (RAID 0 on 3/4 AOK)

Similar Messages

Maybe you are looking for