Error - Budget Return

Dear Experts,
When I am trying to return the budget from a WBS element using T-Code CJ35, I am getting an error with Message No: BP164 "Capital investment budget exists for A-001 - update not allowed".
The WBS element A-001 is assigned to the Investment Program. Further It has two 2nd level WBS Elements which are assigned to it.
Budget returns can performed "Withing the Project" using CJ38. But not "From the project" using CJ35.   
Very much appreciate your comments.
Thanks,
Dileepa.

Hi
Budget Return : In project CJ38
If you are returning in project means returning the WBS elements budget to Project definition.
Budget Return : From  project CJ35
It means you are returning the budget from WBS element to another project WBS elements /Project definition.
Based on your requirements you can select the above return options.
And use IM38 t.code to edit returns in Investment mangement budegts.
Thanks
S.murali
Edited by: S. Murali on Jul 3, 2009 4:51 PM

Similar Messages

  • Budget Exceed error while returning material

    Hi,
    We have this scenario:
    budget is allocated at top WBSE.
    actuals are booked on 2nd level WBSE.
    Tolerance limits: ++ 90% warning
                               ++ 100% error
    Budget profile:
    Activation Type: 1
    Overall: yes
    Releases: yes
    Now,
    We have overall & released budget = 4,320,000.
    and assigned value = 3,895,085.
    Error is coming when we are returning a material from activity:
    "network activity budget exceeded" message no. BP601
    Diagnosis:
    "Payment Budget for WBSE TAT-PR09-06.01 on network activity has been exceeded by 215049.39."
    Kindly help.
    Thanks,
    Harsh.

    Hi,
    Top WBS TAT-PR09-06.1 has original budget and released the same amount i.e. 4320000
    Its System status = PREL BUDG ISBD AVAC
    Then there are three 2nd level WBSE each having one network each:
    TAT-PR09-06.1.01
    System Status = REL  AUC  AVAC
    Network Sys. Status = ACAS MACM PRC  REL
    TAT-PR09-06.1.02
    System Status = REL  AUC  AVAC
    Network Sys. Status = ACAS CSER MACM PRC  REL
    TAT-PR09-06.1.03
    System Status = REL  AUC  AVAC NTUP
    Network Sys. Status = ACAS MACM PRC  REL
    Reservations are there for all Materials in all network activities with reservation relevance indicator set to immediately.
    Error started coming to end user when he tried to send material back to general stock. This material in in network activity under TAT-PR09-06.1.03 WBSE.
    After that our Sr. consultant (he moved to another project right now) made that activity to TECO and asked the end user to create another activity and work on it.
    This is all i know.
    Thanks & Regards,
    Harsh.

  • GNU fortran90 doesn't work now.  I get the error message:gfortran: warning: couldn't understand kern.osversion '14.0.0 ld: library not found for -lcrt1.o collect2: error: ld returned 1 exit status

    GNU fortran 90 no longer works.
    I get the error message:
    gfortran: warning: couldn’t understand kern.osversion ‘14.0.0
    ld: library not found for -lcrt1.o
    collect2: error: ld returned 1 exit status

    GNU fortran 90 no longer works.
    I get the error message:
    gfortran: warning: couldn’t understand kern.osversion ‘14.0.0
    ld: library not found for -lcrt1.o
    collect2: error: ld returned 1 exit status

  • Web service task: Error when returning an empty array

    Hi,
    I've encountered an annoying error when using a Web Service Task from an SSIS package in SQL Server Data Tools.
    [Web Service Task] Error: An error occurred with the following error message: "Microsoft.SqlServer.Dts.Tasks.WebServiceTask.WebserviceTaskException: Could not execute the Web method. The error is: Index was outside the bounds of the array..
       at Microsoft.SqlServer.Dts.Tasks.WebServiceTask.WebMethodInvokerProxy.InvokeMethod(DTSWebMethodInfo methodInfo, String serviceName, Object connection)
       at Microsoft.SqlServer.Dts.Tasks.WebServiceTask.WebServiceTaskUtil.Invoke(DTSWebMethodInfo methodInfo, String serviceName, Object connection, VariableDispenser taskVariableDispenser)
       at Microsoft.SqlServer.Dts.Tasks.WebServiceTask.WebServiceTask.executeThread()".
    It seems that the Web Service Task generates this error when returning an empty response from the WSDL. I've seen several topics about this here on MSDN but they are all from 2008-2009 and seem to suggest that
    this is a bug.  The workaround suggested is using a script task but I would really love to avoid that since my programming skills are lacking.
    I'm using Visual studio 2010 with SP1.

    Hello,
    From my own experience: in all the cases where I had to use SSIS 2008 to retrieve data or send data to Webservices, I had to revert to using Script Tasks or Script components. Whenever I tried with a Web service task, because the job looked simple, I had
    to abandon it in favour of Scripts. Keep in mind that I try to make use of the SSIS components as often as possible, before reverting to Scripting. But handling web services is the one exception, where I always use scripts. In SSIS 2012 I did not find
    any significant improvement of the Web service task and hence no compelling reason to use it.
    Jan D'Hondt - SQL server BI development

  • How to determine the error code, returned from LDAP server

    I use the next code for connect to LDAP server:
            try{
                ctx = new InitialLdapContext(env, null);
                 //if connection successfull ...
            } catch (NamingException){
                 //if error occured ...
            }Is it possible to determine the numeric error code, returned from server?

    I was just working on using openldap, binding to it and checking for expired passwords and locked accounts and it looks like that an AuthenticationException is thrown in these circumstances and the ctx is null so it is not possible process connection response controls. But you can look at operation attributes if you have password policy enabled and you are looking for these type of errors

  • Using a Table Trigger to Trap Error Codes Returned to a SQL Loader seeion

    I would be grateful if anyone knows how to go about this.
    I am trying to insert into a table, details of SQL Loader's rejected records by possibly using a trigger on the loading table to try and trap the error code returned to SQL Loader.
    What I am trying to achieve is to insert in to a table the load or rejected record details that are in SQL Loader’s log file after a load session. For example: records read:, records inserted:, records rejected:...etc..
    My main concern is that the loading table is regularly loaded, with 3m records, has 90 columns, and to check by referencing each column's new value, in the table trigger, may mean very long load times.
    Anyone got any “how to” ideas?
    Many thanks
    Regards
    Carlos

    Folks, thanks for your help.
    Previously, I had briefly considered both ideas and they would work.
    I dismissed the utl_file package solution because I believed that it would take too long to read in each log file line, search for the text and then inserts it into a table.
    I overlooked testing this and when I did (1mb file) it actually was pretty fast. I will go that route.
    Thanks for everyone’s help
    regards
    Carlos

  • Segmentation Error : Server returned HTTP response code: 500 for URL

    Hi,
    when we do customer segmentation in Applet Java Builder, we create a target group using 2 or more criterion, then it prompts us an error "Communication Error" - Server returned HTTP response code: 500 for URL: http//xxxxxxxxxxx/bc/bsp/sap/CRM_MKTTG_SEGAP/communication.do
    we're in CRM 7.0 SP 6.
    What we have done
    - activated the service CRM_MKTTG_SEGAP
    - implement sap note 1481289, 1359890, 1161753
    any info is really appreciated.
    Thanks
    JD

    HI ,
    Communication error occurs because of two active versions of segment builder jar files are appearing , deletion of older version resolves this issue .
    Go to SE80 u2013 Select the BSP Application - CRM_MKTTG_SEGAP and check segmentbuilder.jar Segment Builder Applet under MIME folder and check the size and delete the older version .
    Regards,
    Satish Bondu

  • Java.rmi.UnmarshalException: Error unmarshaling return header

    Hi,
    We are running an RMI server instance to serve data ( from memory) to clients. It works fine if fewer number of inquiries goes in. But when the number of inquiries are larger, I am getting some exceptions at the client side. The server crashes without throwing any exceptions. Following are the exceptions received at client side:
    java.rmi.UnmarshalException: Error unmarshaling return header; nested exception is:
         java.net.SocketException: Connection reset
         at sun.rmi.transport.StreamRemoteCall.executeCall(StreamRemoteCall.java:203)
         at sun.rmi.server.UnicastRef.invoke(UnicastRef.java:133)
         at com.emf1.dataserver.KeyFrequencyKeeper_Stub.getDUNSCounts(Unknown Source)
         at com..match.KeyFrequencyKeeperProxy.getKeyKQSs(KeyFrequencyKeeperProxy.java:307)
         at com.emf1.match.KeyGenerator.generateKeys(KeyGenerator.java:453)
         at com.emf1.match.InquiryProcessor.run(InquiryProcessor.java:870)
         at java.lang.Thread.run(Thread.java:534)
    Caused by: java.net.SocketException: Connection reset
         at java.net.SocketInputStream.read(SocketInputStream.java:168)
         at java.io.BufferedInputStream.fill(BufferedInputStream.java:183)
         at java.io.BufferedInputStream.read(BufferedInputStream.java:201)
         at java.io.DataInputStream.readByte(DataInputStream.java:331)
         at sun.rmi.transport.StreamRemoteCall.executeCall(StreamRemoteCall.java:189)
         ... 6 more
    The period of time, the server keeps on running (before it crashes) is also not the same. Sometimes it works fine without any problem. But most of the time the server crashes after processing some records.
    I don't know why this is happening.
    Please help...
    Thanks in advance..

    I have this error too when I running my rmi server site program.
    I am running it in Linux Environment.
    Anyone got any idea about this?

  • Display of Error messages returned in BAPI in the logon language?

    Hi Experts ,
                          I  have a requirement where in I need to display the error messages returned in the return table of BAPI_BILLINGDOC_CREATEMULTIPLE in the logon language..Is there any function module to convert text in the return table to the logon language?..Any pointers on achieving this functionality would be of great help..Thankz in advance

    >
    Shawn Sunny wrote:
    > Hi Experts ,
    >                       I  have a requirement where in I need to display the error messages returned in the return table of BAPI_BILLINGDOC_CREATEMULTIPLE in the logon language..Is there any function module to convert text in the return table to the logon language?..Any pointers on achieving this functionality would be of great help..Thankz in advance
    Hello Shawn,
    Messages are always displayed in the logon language so what's the big deal in it?
    May be the translation is not maintained for this message in the logon language, hence the issue.
    You maintain the translation from SE91.
    Get the message details from the RETURN table --> Trxn SE91 --> Select the Message to translate --> From the menu bar : Goto --> Translation
    BR,
    Suhas

  • Project Budget Return Currency issues

    HI,
    my business has the following issue:
    The Investment Management happens in Controlling Area currency (USD), while distribution of budgets to projects, spend & budget return happens in Local Currency (say EUR). So when project has a left-over of a budget that they want to return, they take EUR balance, convert it using budget rate of the day to USD equivivalent & make return. This creates an artifitial USD balance.
    For example, 100 EUR were distributed to the project, 80 EUR spend, 20 EUR returned. EUR balnce is Zero, but USD will have some artificial balance arrised due to different rates applied on spend & return.
    So I wonder what other companies normaly do with it? My business came up with a requirement of the following report:
    Re: How to build Project Budget report with "IF-then" formula?
    Many thanks in advance,
    Daria

    Hi Daria,
    My recommendation is to align budget profile settings between IM and PS, means using the Object Currency for both.
    I do believe you have one IM program per country, therefore the Object Currency is possible to be used.
    Regards,
    Paulo

  • Error:server return code 0x8002000E: file failed crc check

    Hi Experts,
                         I am trying to connect to repository in MDM through MDM ABAP API after all the configuration settings in MDMAPIC on execution of the report it gives the error   server return code 0x8002000E: file failed crc check, can anyone provide some helpfull in puts on this problem.
    Thanks,
    Vinay Yadav

    hi,
    follow this link:
    https://www.sdn.sap.com/irj/sdn/wiki?path=/pages/viewpage.action?pageId=4119
    hope this may help you,
    Regards,
    srinivas

  • "System_Error" Error exception return from pipeline processing!

    Hi all,
    I get this error everytime I click the red flag in sxmb_moni:
    com.sap.aii.utilxi.misc.api.BaseRuntimeException
    thrown during application mapping
    com/sap/xi/tf/_CUST_TO_DFS_MM_: RuntimeException
    in Message-Mapping transformatio~
    When I go to TRACE of SOAP Header, I see this error:
      <Trace level="1" type="System_Error">Error exception return from pipeline processing!</Trace>
    The messages were not posted as 'Application document not posted' in we05: they cannot be seen in we05. Because of this, the number of IDOCS posted in we05 is not equal to the XMLs generated in sxmb_moni.
    Please help.
    Thanks.
    Regards,
    IX

    CUST_TO_DFS_MM
    Check this mapping...sometimes just testing in IR is not sufficient....error can also occur at runtime...so take the payload from SXMB_MONI and then test to see why it is failing....
    Also there will be some more error text alongwith CUST_TO_DFS_MM...check it to drill down to the root cause...
    Edited by: abhishek salvi on May 8, 2009 1:00 PM

  • Error exception return from pipeline processing

    Hi Friends,
    In my File to Proxy scenario, i am getting the following error:
    "<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST" />
      <Trace level="1" type="System_Error">Error exception return from pipeline processing!</Trace>".
    The common error i received in the monitor is Message Mapping error.
    But i have checked clearly in the IR, all the mappinngs are correct. While doing the test, it is going well.
    I have gone through some sdn blogs, they have stated like cache refresh, but after doing cash refresh also i am getting the same error.
    Can anyone give me suggestion?
    Thanks in advance.
    Regards
    Bala

    Hi Aashish Sinha,
    I have checked the source code, it is fine. I am getting error in the target code. It is saying that particular filed cannot be mapped. But in the taget that field is existing.
    Regards
    Bala

  • Compile Error: missing return statement

    anyone knows why the following program yields compile error "missing return statement??"
    class LengthTest
         public int stringLength(String s)
         {     int len = s.length();
              if (len <= 5) return 5;
              else if (len <= 10) return 10;
              else if (len <= 20) return 20;
    //          else return 30;
    If I add "else return 30" statement, then it can stop the error. Any ideas??

    You might know that the string length will never be more than 20, but the compiler does not. So it forces you to supply a return statement that will be executed no matter what the string length is.

  • RFC Communication - error CPIC return code 020, SAP return code 665

    Hello,
    I have created RFC destination for connecting SCM system from Solution Manager. Both the systems are Unicode.
    I am getting the following error --
    ERROR                service '?' unknown
    LOCATION             SAP-Gateway on host gva4103 / sapgw00
    COMPONENT            NI (network interface)
    COUNTER              4028
    MODULE
    LINE
    RETURN CODE          -3
    SUBRC                    0
    RELEASE              640
    TIME                 Mon Apr 24 11:28:21 2006
    VERSION              37
    And in SM21, I am getting following description
    Communication error, CPIC return code 020, SAP return code 665
    Following are the things I have checked..
    1. RFC destination user checked, password reset in SM59 and in the target system
    2. checked entries in /etc/services - Entry sapgw03 is present.
    Please let me know what all things I need to check.
    Thanks and Regards,
    Vaibhav

    I solved the problem by myself.
    The problem was with the entry in services file only.
    I was checking the file on Target system, which had the entry. There was no entry in Host system services file. After modifying the file, the connection now works fine.
    Thus for RFC connection, entry of the target system gateway MUST be there in /etc/service of Host system.
    Regards,
    Vaibhav

Maybe you are looking for