Error by quantity PO / SRM-SUS

Hello.
I have SRM 5.0 extended scenario, ECC 6.0
in scene SRM-SUS when rejection an element of the PO the quantity changes to zero. When the PO of SRM is going to update the one of R/3 the system sends the following errors of backend:
PurchaseOrder 3200001700: Instance 3200001700 of object type PurchaseOrder c ould not be changed
PurchaseOrder 3200001700: Please enter an order quantity
as I can avoid this error?

Hello,
Please check:
962488
893531
973156
Also
Please review note 780708 which may help resolve this issue.
Please deactivate the BADIs BBP_PO_INBOUND_BADI BBP_DOC_CHECK_BADI
BBP_ECS_PO_OUT_BADI
BBP_CREATE_BE_PO_NEW
and
ME_PROCESS_PO_CUST
It seems that there is some problem with Z custom programs. Please check it.
I hope this help.
Thanks and regards,
Gaurav
PLEASE REWARD FULL POINTS FOR USEFUL REPLIES

Similar Messages

Help!PO inbound ERROR in SRM SUS when create a PO from R/3

Hi All:
 I met a problem in SRM SUS,when create a po in R/3 and send this PO to SRM SUS,but there was a error in XI monitor t-code:SXMB_MONI, i have created the buyer via t-code: BBP_SUS_BP_ADM,and sent the vender from R/3 that is ok.
 check this xml.plesse take a look at error information.
 <FAULT_TEXT>An error occured within an XI interface: Exception occurredA:BBP_BUPA:263 -Ordering party has to be a company Programm: CX_BBP_BD_ERROR===============CP; Include: CX_BBP_BD_ERROR===============CM002; Line: 57</FAULT_TEXT>
 <FAULT_URL />
 I am used SRM server 5.5, package level is SAPKIBKT06.
 Plesse help....
Thanks
Best Regards

At least i did it.
The solution was in the transaction BUPA_TAXNUMTYPE. Here you can define wether you want to check the duplicated TAXNUMBERS or not. After applying some patches we think the value of the entry corresponding to our country, changed. So we put the value to OFF and everything worked fine again.
Thank you.

The Po Changed XML Message is in Error in SRM SUS

Dear Experts,
We are integrating ECC to SRM SUS system, and PO was successfully processed from PI and in SRM SUS we are getting below error.
<namespace="http://sap.com/xi/SRM/SE/Global">ExchangeFaultData</SAP:ApplicationFaultMessage>
<SAP:Stack>Application has thrown an exception</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
And the message is in Inbound Q with status u201CXI Error Application Error .ABAP:Queue Stoppedu201D
Observed that messege was sucessfully processed from PI, and in error it is showing as XI Error.
Please help us to resolve the issue.
Thanks in Advance,
Soumya.

Hello,
What you can do is:
1.) Look for the name of the queue in SXI_MONITOR of SUS System
2.) Go to tcode SMQ2
3.) Input the name of your queue there
4.) Unlock your queue
Hope this helps,
Mark

SRM-SUS Scenerio Replicating company code and suppliers to SUS via XI

We have configured SRM-SUS scenario. We have SRM and SUS on the same system but different clients. We have configured extended classic scenario. We are on SRM 2007 with SP5
Issue:
When I execute transaction BBP_SP_COMP_INI I get no errors. I check SXMB_MONI in my SUS client and it has processed correctly. However it does not update table BBP_SUS_BPCMPMAP. I check SLG1 in SRM and SUS and get messages that data replicated.
When I execute transaction BBP_SP_SUPP_INI to move the SRM suppliers to SUS I check SXMB_MONI and everything processed correctly. However, when I check table VENMAP there are no entries.
I then create a PO and send to SUS. I get the following error:
Error in an XI interface: No partner found for partner number VNDR_ACCT_ Program: SAPLBBP_BD_VALUE_MAPPING; Include: LBBP_BD_VALUE_MAPPINGF11; Line: 436
When we debug the proxy it is trying to validate our SRM company code (VNDR_ACCT) in table BBP_SUS_BPCMPMAP which is empty.
It appears that SUS is not allowing the creation of external partners. Does SRM to SUS transfers utilize the BP number range table which distinguishes external and internal BPs which is used when replicating suppliers between ECC and SRM.
Has anyone ever encountered this issue before?
Please advise.
Thanks.
Joe

Hello Nikhil:
I think my issue is that the XI proxys' are not being updated in SUS. It appears to me that it is similar to when you are executing BBPGETVD between ECC and SUS (MM-SUS) and the BP number range in SUS is not set to accept external BPs.
So, When I execute BBP_SP_SUPP_INI and send SRM suppliers to SUS how does it know the VG5XXXXXXX. When I replicate BBPGETVD I tell the VG5XXXXXXXX. I did configure the "Managing Business Partners" SUS configuration but we are not using supplier registration so I do not have URL for UM or Notification. I did update the "Central Vendor Group" , "Default Purchase Org", and "Currency". Does XI use this setting to know where to assign the vendors or is there another piece of configuration I missed?
What I did to create the entry in table BBP_SUS_BPCMPMAP is I executed transaction BBP_SUS_BP_ADM and entered in the "Company Code" field the BP from my SRM system assigned to my ECC backend company code . In the log sys field I entered the log sys of my SRM cleint. I then completed the other required fields. In the end it created the following entry:
101 4CF3AE33A6036B71E10000000AF8EF08 ERACLNT100 0001 0000000018
Client 100 is SRM and 101 is SUS.
I am able to configure SUS for MM_SUS and replicate suppliers and company code from ECC to SUS. However, this does not use XI. For thois reason I think my issue is a missing piece of config to tell XI where to create external business partners?
When I check the payload of my SRM PO it does not show the company code but uses BP 18 which is the SRM BP for my backend company code. When I check BBP_PD for this PO in SRM it has my company code as "BE CO_ CODE"
Do you have any more suggestions?
Please advise.
Thanks.
Joe

SRM-SUS and https in a development environment.

Hello experts,
After installing and configuring SRM-SUS, we try to access the system. However, we always get the following error:
SAP Note
The following error text was processed in the system:
BSP exception: Access to page default.htm requires HTTPS. HTTPS has not been configured on this server
How can we access SUS by HTTP, since this is an internal development environment?
We are using SRM 5.0 SPL 9
Thanks for your support
Regards,
Gilberto Gallardo

You can try the following and see the system behaviour.
1)start transaction se80
2) select BSP application and SRMSUS.
3) and find the page default.htm.
4)Go in to the properties tab of the page , there will be option to maintiain flag wether
it is http (or) https.
see wether you can change to http here and then start the system.

Integration Builder Configuration. SRM/EBP ---- XI ------ SRM/SUS

Hi Masters of SRM.
could you please show how make the configuration in XI into Builder configurations
the scenario is SRM/ebp -
> XI -
> SRM/SUS
any guide because I have the guide for the ERP----> XI -
>SUS. but does not my requirement.
the both systems are in same box but different client.
thanks for yours atentions

Thanks: Nichil.
I follow your instructions., when I make simulation in Generation Log. show all lights in yellow color for example:
Receiver Determination(s):
| SRD_009 | PurchaseOrderRequest_Out | * | *
Analysis
Required sender communication component: | SRD_009 A receiver determination was found for the connection All receivers are contained in the receiver determination found
Results
The reused receiver determination is already assigned to the configuration scenario
Notes
Check the conditions for all receivers of the receiver determination. The default result value for the generated condition is: TRUE
I am message for test and I can see the message into PI the estatus is Recorded and flag is color Green.
but no show an error or problems only stay in Recorded Status , othe observation into the SXMB_MONI the fiel Receiver component and Receiver Interface are empty,
what you suggets ?
best regards.

Could not able to see POs in URL (SRM-SUS-MM) Scenario

Hi All,
We have created a PO in MM(R/3) and was transferred to SUS through XI.
We could able to see the PO in TCode BBP_PD in SRM-SUS. But for some reason we are not able to see the PO from the URL.
We have Purchaser (SRM_ADMIN) and Vendor (ARAMI-02) assigned the roles SAP_EC_SUS_ADMIN_PURCHASER and SAP_EC_SUS_ORDER_PROCESSOR respectively.
My Org Structure is as follows:
We have an Organization defined as company. Function CCode deifined.
We have an POrg defined as POrg Function POrg Defined.
We have an Pgrp defined as PGrp Function PGrg Defined.
We have defined vendor Org. haven't assigned anything in function tab.
But defined some attributes needed for Vend Org.
The PO is coming into transaction BBP_PD(SRM SUS) through XI from MM R/3 but is not available in URL either for Purchaser or for Vendor.
Please tell me what needs to be done to resolve the above issue.
Thanks in advance...
Regards,
Ravi..

Hi
Yes sure.. Ask BASIS Team to help out and add the required role / profile to the required User, who is unable to see the POs.
Please go through the following SAP OSS Notes as well ->
Note 852516 Buyer administrator is not able to view supplier documents
Note 854910 Buyer administrator is able to change status for invoices
Note 818385 Purchaser Admin has wrong authority to change invoices
Note 1024327 Short dump when trying to open a vendor message
Note 1032800 Error opening a vendor message in SUS
Note 1029356 Error opening a vendor message in EBP&SUS in one client
Note 884905 No SUS alerts displayed in BP SuCo 2.0
Note 743084 Missing status 'rejected' for Order in Menu
Do let me know.
Regards
- Atul

Reg:SRM-SUS interface

Hi..
we are trying to post Purchase Order from SRM to SUS through XI using Proxy structure.
on SRM side the msg is processed.In xi also the msg got processed.But in SUS inbound the
msg is failing with the following err:
An error occured within an XI interface: Exception occurredE:BBP_PD:147 -Enter a country for partner 0000000001 with type 'Sold-to Party' E:BBP_PD:147 -Enter a country for partner VENDOR1 with type 'Vendor' E:BS:002 -"Create" is not allowed (SUS Purchase Order 1000000567 ) Programm:
Can anyone please help us in this?

Hi
Just check this thread same is discussed here
SRM-XI-SUS
also check the SAP Note Note 982822 - PO Inbound in SUS with error BBP_PD 147
Note 804317 - SRM40/SUS/PO: PO inbound with error BBP_PD 147
Note 956072 - SUS: Not possible to create ERS invoice in SUS
Regards
Abhishek
Edited by: Abhishek Agrahari on Jan 14, 2009 11:59 AM

Inventory Error :Transaction quantity must be = available quantity.

An error occurred while relieving reservations.|Transaction quantity must be less than or equal to available quantity.
while doing material transactions in transaction open interface iam getting above error......Kindly help me as i am struck here and it is high priority issue and need to be resolved as soon as possible..

refer -
Pending Move Transactions FAQ [ID 1141334.1]
WIP_MOVE_TXN_INTERFACE Common Errors In Pending Move Transactions With Possible Causes And Action Plan To Process Them [ID 457066.1]
Outside Processing Wip Move Transaction Fails With Overcompletion Quantity [ID 427558.1]
Pending Move Transaction Error - Allow Moves Not Enabled [ID 780732.1]
R12 OSP Job (Also Repetitive Schedule) Do Not Support Overcompletion: Error 'Transaction quantity must be less than or equal...' [ID 563011.1]
cheers,
VB

Error in quantity translation in CO-PA valuation using material costing

Dear SAP Gurus,
While releasing the billing document to accounting I am getting the following error:
Error in quantity translation in CO-PA valuation using material costing
Message no. K/821
Diagnosis
In Profitability Analysis (CO-PA), the system tried to use a material cost estimate to translate the unit KG for the material KG into the base unit of measure EA for that material.
The system could not do this.
System Response
The document cannot be processed further.
Procedure
Check the quantity entered in the affected CO-PA quantity field &V4 .
If necessary, change the material master to allow the unit KG as an alternative unit for the material 970000000000000016.
Can anyone provide me with a solution to the said problem.
Regards
Nikit

Hi Piet,
That does not seem to be the solution as i cant define for all the materials how many units EA = how many kgs. Thanks for the reply anyway

Creating custom field in ASN screen of SRM SUS

Hi,
Our requirment is as follows
A custom defined field is to be created in the ASN screen under the Delivery Information block (under the field Bill of Ladding)
As in the normal scenario of ASN the shipment notification is sent to R/3 through XI. Now this new custom field is also to be sent to R/3 through XI in the normal way. This field carries a alphanumerical value
Could someone help us in this regard, how to create this new field in SRM and map it to XI
System Details:
SRM SERVER 5.5
SRM 5.0
XI 7.0
Regards,
Solai

Dear Solai
For addind new fields in SRM-SUS scenarios
First add an field in the inbound delivery in R3 tables
Second map the same in XI in the adapter engine in the mappping process
third add field at the table level in SRM also refer note 672960 where it is refering the INCL_EEW_* structures .
Secndly modify the template which is dispayed on the SUS portal .
Regards,
Nimish Sheth
do reward points for helpful answers.

Data Consistency when Copying/ Refreshing ECC 6.0 and SRM-SUS 5.0 Systems

Hello,
We are planning a refresh / system copy of an ECC 6.0 and SRM-SUS 5.0 system
The refreshes will be completed from backups taken of production systems refreshed onto the QA Landscape.
I have referenced the following SDN thread that provides some guidelines on how to refresh R/3 and SRM systems and maintain data consistency between the systems using BDLS and changing entries that correspond to backend RFC destinations:
[Is there a process/program to update tables/data after System Refresh?;
This thread is fairly old and relates to earlier versions of R/3 (4.7) and SRM (3.0). We have heard that at higher system versions there may be technical reasons why a refresh canu2019t be performed.
Does anyone have experience of completing successful refreshes of landscape that contain ECC and SRM systems at higher SAP versions (ideally ECC 6.0 and SRM-SUS 5.0) Does anyone know whether it is technically possible?
Are there any additional steps that we need to be aware of at these higher SAP versions in completing the copy to ensure that the data remains consistent between ECC and SRM?
Thanks
Frances

I have seen this somewhere in the forum: See if this helps you
BDLS: Convertion of logical system (SRM).
Check entry in table TWPURLSVR.
Check RFC connections (R/3 and SRM)
SPRO, check or set the following points:
Set up Distribution Model and distribute it
Define backend system
Define backend sytem per product category
Setting for vendor synchronization
Numbe ranges
Define object in backend sytem
Define external services (catalogs)
Check WF customizing: SWU3, settings for tasks
SICF: maintain the service BBPSTART, SAPCONNECT
SE38:
Run SIAC_PUBLISH_ALL_INTERNAL
Run BBP_LOCATIONS_GET_ALL
Update vendor BBPUPDVD
Check Middleware if used.
Run BBP_GET_EXRATE.
Schedule jobs (bbp_get_status2, clean_reqreq_up)
Convert attributes with RHOM_ATTRIBUTE_REPLACE

SRM-SUS - Extended Classic - Purchase Order Response

Hi folks,
We are using SRM-SUS in an Extended Classic scenario in SRM 5.0. When the Vendor creates a Purchase Order Response (POR) we want the Requisitioner of the Shopping Cart (not the Purchaser from the Purchase Order) to process the POR in EBP.
We will add the transaction Process Purchase Reponse to the Requisitioner role. We want to ensure that the Requisitioner can only see PORs related to Purchase Orders created from the Requisitioner's individual Shopping Carts.
Has anybody any suggestions and/or see obstacles in our way?
Cheers,
Pat

Hi Pat,
This is certainly not standard. I see the following challenges:
a. From the system perspective, your Shoppers will need to be assigned to purchasing group(s) in Org Structure to see the related PORs. That's very unusual, and consequences can be unpredictable.
b. From the internal controls / business process / security perspective, you may be creating some SOD (segregation of duties) issues.
IMHO, your business requirement needs to be re-visited. My two cents...
Cheers,
Serguei

Service procurement from SRM-SUS

HI,
Pl guide me how to procure services from SRM-sus
Say supplier performs the services and confirmation in SRM-SUS so that SES will be created in R/3
and SES approval in R/3 and send back the SES no to SRM-sus.
pl share is thesre any documents regarding process flows etc
thanks
Rami

hi,
I Have created the service order with service activity in ECC6 and send the Idoc to SRM(version5)
in SRM i am not able to view the Serive Details. only item overview discription with 1 AU is displaying.
i want create ASN for actual service perofrmed by vendor.
EX PO item overview
item 10- painting at E Block 1 au value 1000
item details
activity no 100000000 - painting at E16.- 10 QTY- rs 100 and net value 1000
because i want to create ASN for 1 Qty,value Rs 100. how to get these details in portal?
system created inbound delivery after i have create the ASN in SRM . actually i want to create SES.
is there any confi required(process code etc).
help required
regds
Rami reddy

Change the standard XI content for SRM SUS scenario

Hello everyone,
I am implementing the "Plan driven procurement with supplier integration" scenario which integrates the SAP R/3 and SRM-SUS.
I have imported the standard XI content available on service market place for the scenario.
Now i have to modify the scenario. I have to add some additional fields in the inbound message for purchase order request.
The proxy classes for these interfaces were already created in the SRM system.
So now after changing the message type what all things i shd take care of e.g like creating the proxy newly etc.
Thanks and Regards
Rahul Nawale

Hi Shabarish,
Thanks for your reply, but i have a couple of more questions.
1.I can find a function module called from the method present in the proxy class generated.
METHOD ii_bbpx1_preq_request_in~execute_asynchronous.
CALL FUNCTION 'BBP_SAPXML1_EXTREQU_UPDATE_IN'
EXPORTING
is_purchreq_request = input.
ENDMETHOD.
so since i am changing the purchase order request do i have to do any changes in the function module as well.
In the function module Proxy Structures are mapped to the API Structures and then the API is called using BBP_API_EXTREQU_UPDATE function module.
Thanks and Regards
Rahul Nawale

Error by quantity PO / SRM-SUS

Similar Messages

Maybe you are looking for