Error by Step 'Import ABAP' (SolMng 7.01 MaxDB/Linux 64bit)
Hello
I'm Installing the Solution Manager on Red Hat 5 (Linux x86_64) with MaxDB 7.7.
The installation stops by the step "Import ABAP".
Using the User <sid>adm I get:
hostname:sm0adm 14> /usr/sap/SM0/SYS/exe/run/R3load -testconnect
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
/usr/sap/SM0/SYS/exe/run/R3load: START OF LOG: 20110108224646
/usr/sap/SM0/SYS/exe/run/R3load: sccsid @(#) $Id: //bas/701_REL/src/R3ld/R3load/R3ldmain.c#8 $ SAP
/usr/sap/SM0/SYS/exe/run/R3load: version R7.01/V1.4 [UNICODE]
Compiled Sep 20 2010 21:57:57
/usr/sap/SM0/SYS/exe/run/R3load -testconnect
(DB) ERROR: DbSlControl(DBSL_CMD_IMP_FUNS_SET) rc = 20
(DB) ERROR: DbSlErrorMsg rc = 20
/usr/sap/SM0/SYS/exe/run/R3load: job finished with 1 error(s)
/usr/sap/SM0/SYS/exe/run/R3load: END OF LOG: 20110108224646
This is exactly the same error as in the installation protocol.
The error is similar to
ECC6 Install Error at "Import ABAP" step
but on Linux and not on Windows.
I also installed the latest R3load, but I get the same error.
Any hint would be appreciated.
Regards
T.C.
Solved.
/usr/sap/SM0/SYS/exe/run/R3load -testconnect
/usr/sap/SM0/SYS/exe/run/R3trans -d
less trans.log
https://service.sap.com/sap/support/notes/1193243
rpm --install --force /mnt/data/libstdc++-3.2.3-60.x86_64.rpm
Similar Messages
-
Installation Solution Manager error in the step Import Abap
We are installing Solution Manager but in the step import abap, appear
the error:
/usr/sap/SML/SYS/exe/run/R3load: version R7.01/V1.4 [UNICODE]
Compiled Feb 24 2009 21:54:08
/usr/sap/SML/SYS/exe/run/R3load -testconnect
(DB) ERROR: DbSlControl(DBSL_CMD_IMP_FUNS_SET) rc = 20
(DB) ERROR: DbSlErrorMsg rc = 20
/usr/sap/SML/SYS/exe/run/R3load: job finished with 1 error(s)
/usr/sap/SML/SYS/exe/run/R3load: END OF LOG: 20091202234420</message>
I appreciate your help for this problem
Regards.
Ricardo RivasHi,
Check SAP note 898181.
Thanks
Sunny -
SAP ERP 2005 SR 2 IDES installation error in step "Run ABAP Reports"
Hello,
I'm installing SAP ERP 2005 SR 2 IDES on Win2003 R2 SP2 and Oracle 10.2 to create a test-system for my diploma thesis.
During the step "Import ABAP" I got the following message:
object_checker.log
ERROR: 2008-05-21 20:50:38
1 objects have error/ignore/execute or unknown status in the task lines.
Invalid objects are saved in 'invalid_objects.txt' file.
invalid_objects.txt
package object type action status
SAPDFACT ?N pkey create
but the installation went on until "Run ABAP Reports".
Warnings and Errors in sapinst.log are:
WARNING 2008-05-27 15:09:36
Execution of the command "C:\usr\sap\IMP\SYS\exe\uc\NTI386\stopsap.exe name=IMP nr=00 SAPDIAHOST=imperia-sap" finished with return code -1. Output:
STOPSAP: execution of C:\usr\sap\IMP\SYS\exe\uc\NTI386\sapntwaitforhalt.exe name=IMP nr=00 SAPDIAHOST=imperia-sap 3600 failed
Details are written to C:\Programme\sapinst_instdir\ERP\SYSTEM\ORA\CENTRAL\AS\stopsap.log
WARNING 2008-05-27 15:09:36
Could not stop instance 'DVEBMGS00' of SAP system IMP.
WARNING 2008-05-27 15:09:38
Connect to message server (imperia-sap/3900) failed: NIECONN_REFUSED.
WARNING[E] 2008-05-27 15:12:05
FSL-06002 Error 1060 (Der angegebene Dienst ist kein installierter Dienst.) in execution of a 'OpenService' function, line (266), with parameter (sapccmsr.00).
WARNING[E] 2008-05-27 15:21:42
FRF-00007 Unable to open RFC connection.
ERROR 2008-05-27 16:30:15
FRF-00025 Unable to call function. Error message: connection closed without message (CM_NO_DATA_RECEIVED) .
INFO 2008-05-27 16:30:19
RFC connection closed.
ERROR 2008-05-27 16:30:45
MUT-03025 Caught ERfcExcept in Modulecall: connection closed without message (CM_NO_DATA_RECEIVED).
ERROR 2008-05-27 16:30:47
FCO-00011 The step runRADDBDIF with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_CI_Instance_ABAP_Reports|ind|ind|ind|ind|2|0|runRADDBDIF was executed with status ERROR .
Full log of today is available at [http://pastebin.com/f43531f97]
Has anyone an idea how I can finish this installation?
Thx
DanieleIt seems that the system did not come up and thus the RFC call fails.
What´s the output of
dev_w0
dev_disp
(in the ...work directory)?
Markus -
Error in Phase Import ABAP by Installation of Solution Manager 4.0
Hello,
i have started Installation of Solution Manager 4.0 (Win,MaxDb).An Error occurred during phase Abap Import. From 18 Jobs only 13 was completed, 5 failed. After retry next 3 jobs was completed, but the last 2 will not completed (i have tried 3 times).
Messages from logs:
import_monitor.log
TRACE: 2007-06-09 15:40:49 com.sap.inst.migmon.LoadTask run
Loading of 'SAPAPPL0' import package is started.
TRACE: 2007-06-09 15:40:49 com.sap.inst.migmon.LoadTask processPackage
Loading of 'SAPAPPL0' import package into database:
D:\usr\sap\SM2\SYS\exe\uc\NTI386\R3load.exe -i SAPAPPL0.cmd -dbcodepage 4103 -l SAPAPPL0.log -nolog -c 0
ERROR: 2007-06-09 19:04:59 com.sap.inst.migmon.LoadTask run
Loading of 'SAPAPPL0' import package is interrupted with R3load error.
Process 'D:\usr\sap\SM2\SYS\exe\uc\NTI386\R3load.exe -i SAPAPPL0.cmd -dbcodepage 4103 -l SAPAPPL0.log -nolog -c 0' exited with return code 2.
For mode details see 'SAPAPPL0.log' file.
Standard error output:
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
SAPAPPL0.log
(IMP) INFO: import of LISCOMDES completed (0 rows) #20070608172145
(RDI) ERROR: missing attribute description for table "LISDOMAIN" in DB independent control file "E:\install_dvd\export\EXP3\DATA\SAPAPPL0.STR"
(DB) ERROR: DDL statement failed
(ALTER TABLE "LISDOMAIN" ALTER PRIMARY KEY ( "DOMNAM", "STATE" ) )
DbSlExecute: rc = 103
(SQL error -942)
error message returned by DbSl:
(IMP) ERROR: LOCK TABLE failed for table LISDOMAIN
(RDI) ERROR: missing attribute description for table "LISDOMAIN" in DB independent control file "E:\install_dvd\export\EXP3\DATA\SAPAPPL0.STR"
Have anybody any ideas or sugestions?
Regards
Bogdan RokosaHello,
problem solved. After installation stop and system restart, phase ran without errors.
Regards
Bogdan Rokosa -
Error at step Run ABAP Reports during system copy in HPUX
Hi experts,
During system copy from Prodcution to Development i am facing the following errror at step
Run ABAP Reports
INFO 2009-03-18 03:57:36
Information for application function INST_EXECUTE_REPORT copied to local Repository.
INFO 2009-03-18 03:57:36
Function module INST_EXECUTE_REPORT set successfully.
INFO 2009-03-18 03:57:36
Executing function call INST_EXECUTE_REPORT.
ERROR 2009-03-18 03:57:38
FRF-00025 Unable to call function. Error message: Exception condition "WRITE_FAILED" raised. .
INFO 2009-03-18 03:57:38
RFC connection closed.
ERROR 2009-03-18 03:57:38
MUT-03025 Caught ERfcExcept in Modulecall: Exception condition "WRITE_FAILED" raised..
ERROR 2009-03-18 03:57:38
FCO-00011 The step runRADDBDIF with step key |NW_Doublestack_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_CI_Instance_ABAP_Reports|ind|ind|ind|ind|2|0|runRADDBDIF was executed with status ERROR .
Please let me know the solution
Thanks & Regards,
ArunThis seems to be related with permission to write in /usr/sap/trans
Read,
Re: Run ABAP Reports error during ECC 6.0 installation on Win2003 with Oracle
Exception condition "WRITE_FAILED" raised during installation 4.0
and
Install error at Phase 33
Regards
Juan -
DbSl Trace: CONNECT failed with sql error '12518' at IMPORT ABAP
Hi
We are trying to install ECC 6.0 on windows 2008 SP2 and oracle 10.2.0.4. We get an error at IMPORT ABAP phase.
content of import_monitor.java :
java version "1.4.2_26"
Java(TM) Platform, Standard Edition for Business (build 1.4.2_26-b03)
Java HotSpot(TM) 64-Bit Server VM (build 1.4.2_26-b03, mixed mode)
Import Monitor jobs: running 1, waiting 1, completed 26, failed 0, total 28.
Loading of 'SAPSLOAD' import package: ERROR
Import Monitor jobs: running 0, waiting 1, completed 26, failed 1, total 28.
content of SAPSLOAD.log:
E:\usr\sap\UED\SYS\exe\uc\NTAMD64\R3load.exe: START OF LOG: 20100705173108
E:\usr\sap\UED\SYS\exe\uc\NTAMD64\R3load.exe: sccsid @(#) $Id: //bas/701_REL/src/R3ld/R3load/R3ldmain.c#5 $ SAP
E:\usr\sap\UED\SYS\exe\uc\NTAMD64\R3load.exe: version R7.01/V1.4 [UNICODE]
Compiled Feb 24 2009 23:41:07
E:\usr\sap\UED\SYS\exe\uc\NTAMD64\R3load.exe -i SAPSLOAD.cmd -dbcodepage 4103 -l SAPSLOAD.log -stop_on_error
DbSl Trace: OCI-call 'OCIServerAttach' failed with rc=12518
DbSl Trace: CONNECT failed with sql error '12518'
DbSl Trace: OCI-call 'OCIServerAttach' failed with rc=12518
DbSl Trace: CONNECT failed with sql error '12518'
(DB) ERROR: db_connect rc = 256
DbSl Trace: OCI-call 'OCIServerAttach' failed with rc=12518
DbSl Trace: CONNECT failed with sql error '12518'
DbSl Trace: OCI-call 'OCIServerAttach' failed with rc=12518
DbSl Trace: CONNECT failed with sql error '12518'
(DB) ERROR: DbSlErrorMsg rc = 99
E:\usr\sap\UED\SYS\exe\uc\NTAMD64\R3load.exe: job finished with 1 error(s)
E:\usr\sap\UED\SYS\exe\uc\NTAMD64\R3load.exe: END OF LOG: 20100705173108
content of sqlnet.log file:
Fatal NI connect error 12560, connecting to:
(DESCRIPTION=(ADDRESS=(PROTOCOL=BEQ)(PROGRAM=oracle)(ARGV0=oracleUED)(ARGS='(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))'))(CONNECT_DATA=(SID=UED)(CID=(PROGRAM=E:\oracle\UED\102\bin\sqlplus.exe)(HOST=U34SSAPUED)(USER=uedadm))))
VERSION INFORMATION:
TNS for 64-bit Windows: Version 10.2.0.4.0 - Production
Oracle Bequeath NT Protocol Adapter for 64-bit Windows: Version 10.2.0.4.0 - Production
Time: 05-JUL-2010 16:19:39
Tracing not turned on.
Tns error struct:
ns main err code: 12560
TNS-12560: TNS:protocol adapter error
ns secondary err code: 0
nt main err code: 530
TNS-00530: Protocol adapter error
nt secondary err code: 2
nt OS err code: 0
Fatal NI connect error 12518, connecting to:
(DESCRIPTION=(ADDRESS=(COMMUNITY=SAP.WORLD)(PROTOCOL=TCP)(HOST=u34ssapued)(PORT=1527))(CONNECT_DATA=(SID=UED)(GLOBAL_NAME=UED.WORLD)(CID=(PROGRAM=E:\usr\sap\UED\SYS\exe\uc\NTAMD64\R3load.exe)(HOST=U34SSAPUED)(USER=uedadm))))
VERSION INFORMATION:
TNS for 64-bit Windows: Version 10.2.0.2.0 - Production
Windows NT TCP/IP NT Protocol Adapter for 64-bit Windows: Version 10.2.0.2.0 - Production
Time: 05-JUL-2010 17:28:38
Tracing not turned on.
Tns error struct:
ns main err code: 12564
TNS-12564: TNS:connection refused
ns secondary err code: 0
nt main err code: 0
nt secondary err code: 0
nt OS err code: 0
Best Regards...,Hi,
TNS-12560: TNS:protocol adapter error
Probably your listener or database is down...
If both are running, just stop the installation and reboot the server.
Then again start listener and database and continue SAP installation with "Continue old installation" option..
Also make sure that below environment variables are set properly...
ORACLE_HOME
ORACLE_SID
DBSID
Regards.
Rajesh Narkhede -
IMPORT ABAP phase error when install database instance
Error number 207 error type SPECIFIC_CODE.
In phase "Import ABAP" the installation halts with error. Can anyone please tell me what error should I search for and (possibly) what is the solution?
Thanks in advance
synxcaccmg.cpp: 133: PSyUser CSyAccountMgtImpl::getUser(iastring sNameOrSID) const
syxxccache.cpp: 267: CSyAccountCache::getUserImpl(name="IboSap-PC\nspadm", sid="", create=false)
syxxccache.cpp: 276: CSyAccountCache::getUserImpl(name="IboSap-PC\nspadm", sid="", create=false, ISyProgressObserver* )
synxcuser.cpp: 119: CSyUserImpl::CSyUserImpl(const CUserData&, bool)
Account user="IboSap-PC\nspadm" does not exist.
Failed action: with parameters
Error number 207 error type SPECIFIC_CODEIt is not easy, really , it has taken many hours and at the End I got the problems,.
so I have decided to pay 20 $ every month, and I can get an access IDES to SAP, ERP, ABAP.
without any problem. In ABAP, I have only Sflight ,SBOOK etc. but MARA, and others tables, dont exist, .
I know, some students have not enough money, so what can we do? every one get problem with installaion and others after installaion, with server, 3 days work, and NSP becomes RED. Yellow, etc.
anyway. thank you for all.
Best Regards. -
Error While Installing SAP ECC 6.0 on Oracle DB at 19th Step Import ABAP
Hey all,
I am NEw to this Forum..And this is My First Post in this Forum...
When I Was Installing SAP Ecc 6.0 on My PC.. I got An Error Message at 19th Step at Monitoring the Job 18...The Issue is Below...
INFO 2013-08-30 06:12:14
Copied file 'C:/Program Files/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/inifile.xml' to 'C:/Program Files/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/inifile.4.xml'.
INFO 2013-08-30 06:12:14
Copied file 'C:/Program Files/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/inifile.xml' to 'C:/Program Files/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/inifile.5.xml'.
INFO 2013-08-30 06:12:16
Execute step
Component W2K_ServicePack_Check|ind|ind|ind|ind
Preprocess of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_First_Steps|ind|ind|ind|ind|0|0|W2K_ServicePack_Check|ind|ind|ind|ind|2|0.
INFO 2013-08-30 06:12:28
Copied file 'C:/Program Files/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/keydb.xml' to 'C:/Program Files/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/keydb.3.xml'.
INFO 2013-08-30 06:12:28
Execute step runMigrationMonitor of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_ABAP_Import_Dialog|ind|ind|ind|ind|5|0|NW_ABAP_Import|ind|ind|ind|ind|0|0.
INFO 2013-08-30 06:12:33
Switched to user: ramadm.
INFO 2013-08-30 06:12:33
Creating file C:\Program Files\sapinst_instdir\ERP\SYSTEM\ORA\CENTRAL\AS\import_monitor.java.log.
INFO 2013-08-30 06:12:33
Switched to user: ramadm.
INFO 2013-08-30 06:12:33
Working directory changed to C:\Program Files\sapinst_instdir\ERP\SYSTEM\ORA\CENTRAL\AS.
INFO 2013-08-30 06:12:33
Output of C:\j2sdk1.4.2_13\bin\java.exe -classpath migmon.jar -showversion com.sap.inst.migmon.imp.ImportMonitor -dbType ORA -importDirs "E:\ECC 6.0\ecc6\DB1\EXP1;E:\ECC 6.0\ecc6\DB2\EXP2;E:\ECC 6.0\ecc6\DB3\EXP3;E:\ECC 6.0\ecc6\DB4\EXP4;E:\ECC 6.0\ecc6\DB5\EXP5;E:\ECC 6.0\ecc6\DB6\EXP6;E:\ECC 6.0\ecc6\DB6\EXP7;E:\ECC 6.0\ecc6\DB6\EXP8;E:\ECC 6.0\ecc6\DB6\EXP9;E:\ECC 6.0\ecc6\DB6\EXP10;E:\ECC 6.0\ecc6\DB6\EXP11" -installDir "C:\Program Files\sapinst_instdir\ERP\SYSTEM\ORA\CENTRAL\AS" -orderBy "" -r3loadExe D:\usr\sap\RAM\SYS\exe\uc\NTI386\R3load.exe -tskFiles yes -extFiles yes -dbCodepage 4103 -jobNum 3 -monitorTimeout 30 -loadArgs " -stop_on_error" -trace all -sapinst is written to the logfile import_monitor.java.log.
WARNING 2013-08-30 06:17:03
Execution of the command "C:\j2sdk1.4.2_13\bin\java.exe -classpath migmon.jar -showversion com.sap.inst.migmon.imp.ImportMonitor -dbType ORA -importDirs "E:\ECC 6.0\ecc6\DB1\EXP1;E:\ECC 6.0\ecc6\DB2\EXP2;E:\ECC 6.0\ecc6\DB3\EXP3;E:\ECC 6.0\ecc6\DB4\EXP4;E:\ECC 6.0\ecc6\DB5\EXP5;E:\ECC 6.0\ecc6\DB6\EXP6;E:\ECC 6.0\ecc6\DB6\EXP7;E:\ECC 6.0\ecc6\DB6\EXP8;E:\ECC 6.0\ecc6\DB6\EXP9;E:\ECC 6.0\ecc6\DB6\EXP10;E:\ECC 6.0\ecc6\DB6\EXP11" -installDir "C:\Program Files\sapinst_instdir\ERP\SYSTEM\ORA\CENTRAL\AS" -orderBy "" -r3loadExe D:\usr\sap\RAM\SYS\exe\uc\NTI386\R3load.exe -tskFiles yes -extFiles yes -dbCodepage 4103 -jobNum 3 -monitorTimeout 30 -loadArgs " -stop_on_error" -trace all -sapinst" finished with return code 103. Output:
java version "1.4.2_13"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_13-b06)
Java HotSpot(TM) Client VM (build 1.4.2_13-b06, mixed mode)
Import Monitor jobs: running 1, waiting 1, completed 17, failed 0, total 19.
Loading of 'SAPAPPL2' import package: ERROR
Import Monitor jobs: running 0, waiting 1, completed 17, failed 1, total 19.
ERROR 2013-08-30 06:17:03
CJS-30022 Program 'Migration Monitor' exits with error code 103. For details see log file(s) import_monitor.java.log, import_monitor.log.
ERROR 2013-08-30 06:17:03
FCO-00011 The step runMigrationMonitor with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_ABAP_Import_Dialog|ind|ind|ind|ind|5|0|NW_ABAP_Import|ind|ind|ind|ind|0|0|runMigrationMonitor was executed with status ERROR .
This info i found in the log file generated at sapint.log...So I request you all Plz Help me Regard this..and Thanx in Advance..
KumarKumar,
As suggested in this log, please try to see the logs import_monitor.java.log, import_monitor.log
However above log files might not suggest something specific but as we can see the latest error was w.r.t the package SAPAPPL2.
Please try to see SAPAPPL2.log and we should get something specific there as why the loading job failed for this package.
Thanks -
SAPinst error at phase import abap
Hi All,
We've just recently uninstall SAP ERP from QAS server due to crash and started to install SAP again on the server. I've encounter error on abap import (Phase 24/64) on installation. SAPinst.log shows below error;-
WARNING 2011-02-28 14:06:03.149
Execution of the command "/usr/jdk/j2sdk1.4.2_20/bin/java -classpath migmon.jar -showversion -Xmx1024m -d64 com.sap.inst.migmon.imp.ImportMonitor -sapinst" finished with return code 103. Output:
java version "1.4.2_20-rev"
Java(TM) Platform, Standard Edition for Business (build 1.4.2_20-rev-b04)
Java HotSpot(TM) 64-Bit Server VM (build 1.4.2_20-rev-b04, mixed mode)
Import Monitor jobs: running 1, waiting 27, completed 0, failed 0, total 28.
Loading of 'SAPNTAB' import package: OK
Import Monitor jobs: running 0, waiting 27, completed 1, failed 0, total 28.
Import Monitor jobs: running 1, waiting 26, completed 1, failed 0, total 28.
Import Monitor jobs: running 2, waiting 25, completed 1, failed 0, total 28.
Import Monitor jobs: running 3, waiting 24, completed 1, failed 0, total 28.
Import Monitor jobs: running 4, waiting 23, completed 1, failed 0, total 28.
Import Monitor jobs: running 5, waiting 22, completed 1, failed 0, total 28.
Import Monitor jobs: running 6, waiting 21, completed 1, failed 0, total 28.
Import Monitor jobs: running 7, waiting 20, completed 1, failed 0, total 28.
Import Monitor jobs: running 8, waiting 19, completed 1, failed 0, total 28.
Import Monitor jobs: running 9, waiting 18, completed 1, failed 0, total 28.
Import Monitor jobs: running 10, waiting 17, completed 1, failed 0, total 28.
Loading of 'DD03L' import package: ERROR
Import Monitor jobs: running 9, waiting 17, completed 1, failed 1, total 28.
Loading of 'DOKCLU' import package: ERROR
Import Monitor jobs: running 8, waiting 17, completed 1, failed 2, total 28.
Loading of 'SAPSSRC' import package: ERROR
Import Monitor jobs: running 7, waiting 17, completed 1, failed 3, total 28.
Loading of 'SAPSDIC' import package: ERROR
Import Monitor jobs: running 6, waiting 17, completed 1, failed 4, total 28.
Import Monitor jobs: running 7, waiting 16, completed 1, failed 4, total 28.
Import Monitor jobs: running 8, waiting 15, completed 1, failed 4, total 28.
Import Monitor jobs: running 9, waiting 14, completed 1, failed 4, total 28.
Import Monitor jobs: running 10, waiting 13, completed 1, failed 4, total 28.
Loading of 'FUPARAREF' import package: ERROR
Import Monitor jobs: running 9, waiting 13, completed 1, failed 5, total 28.
Loading of 'TODIR' import package: ERROR
Import Monitor jobs: running 8, waiting 13, completed 1, failed 6, total 28.
Loading of 'E071K' import package: ERROR
Import Monitor jobs: running 7, waiting 13, completed 1, failed 7, total 28.
Loading of 'SCPRVALS' import package: ERROR
Import Monitor jobs: running 6, waiting 13, completed 1, failed 8, total 28.
Import Monitor jobs: running 7, waiting 12, completed 1, failed 8, total 28.
Import Monitor jobs: running 8, waiting 11, completed 1, failed 8, total 28.
Import Monitor jobs: running 9, waiting 10, completed 1, failed 8, total 28.
Import Monitor jobs: running 10, waiting 9, completed 1, failed 8, total 28.
Loading of 'SAPSDOCU' import package: ERROR
Import Monitor jobs: running 9, waiting 9, completed 1, failed 9, total 28.
Loading of 'SAPCLUST' import package: ERROR
Import Monitor jobs: running 8, waiting 9, completed 1, failed 10, total 28.
Loading of 'SAPSPROT' import package: ERROR
Import Monitor jobs: running 7, waiting 9, completed 1, failed 11, total 28.
Import Monitor jobs: running 8, waiting 8, completed 1, failed 11, total 28.
Import Monitor jobs: running 9, waiting 7, completed 1, failed 11, total 28.
Import Monitor jobs: running 10, waiting 6, completed 1, failed 11, total 28.
Loading of 'SAPAPPL1' import package: ERROR
Import Monitor jobs: running 9, waiting 6, completed 1, failed 12, total 28.
Import Monitor jobs: running 10, waiting 5, completed 1, failed 12, total 28.
Loading of 'SAPDDIM' import package: ERROR
Loading of 'SAPSLOAD' import package: ERROR
Import Monitor jobs: running 7, waiting 5, completed 1, failed 15, total 28.
Import Monitor jobs: running 7, waiting 5, completed 1, failed 15, total 28.
Loading of 'SAPUSER' import package: ERROR
Import Monitor jobs: running 7, waiting 5, completed 1, failed 15, total 28.
Loading of 'SAPSLEXC' import package: ERROR
Loading of 'SEOCOMPODF' import package: ERROR
Import Monitor jobs: running 5, waiting 5, completed 1, failed 17, total 28.
Import Monitor jobs: running 5, waiting 5, completed 1, failed 17, total 28.
Loading of 'SAPPOOL' import package: ERROR
Import Monitor jobs: running 4, waiting 5, completed 1, failed 18, total 28.
Loading of 'SAPSSEXC' import package: ERROR
Import Monitor jobs: running 3, waiting 5, completed 1, failed 19, total 28.
Loading of 'SCPRSVALS' import package: ERROR
Import Monitor jobs: running 2, waiting 5, completed 1, failed 20, total 28.
Import Monitor jobs: running 3, waiting 4, completed 1, failed 20, total 28.
Import Monitor jobs: running 4, waiting 3, completed 1, failed 20, total 28.
Import Monitor jobs: running 5, waiting 2, completed 1, failed 20, total 28.
Import Monitor jobs: running 6, waiting 1, completed 1, failed 20, total 28.
Loading of 'SAPDFACT' import package: ERROR
Import Monitor jobs: running 5, waiting 1, completed 1, failed 21, total 28.
Loading of 'SAPDODS' import package: ERROR
Import Monitor jobs: running 4, waiting 1, completed 1, failed 22, total 28.
Loading of 'SAPUSER1' import package: ERROR
Import Monitor jobs: running 3, waiting 1, completed 1, failed 23, total 28.
Loading of 'SAP0000' import package: ERROR
Import Monitor jobs: running 2, waiting 1, completed 1, failed 24, total 28.
Loading of 'SAPAPPL0' import package: ERROR
Import Monitor jobs: running 1, waiting 1, completed 1, failed 25, total 28.
Loading of 'SAPAPPL2' import package: ERROR
Import Monitor jobs: running 0, waiting 1, completed 1, failed 26, total 28.
INFO[E] 2011-02-28 14:06:03.156
CJS-30022 Program 'Migration Monitor' exits with error code 103. For details see log file(s) import_monitor.java.log, import_monitor.log.
ERROR 2011-02-28 14:06:03.542
FCO-00011 The step runMigrationMonitor with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_ABAP_Import_Dialog|ind|ind|ind|ind|5|0|NW_ABAP_Import|ind|ind|ind|ind|0|0|runMigrationMonitor was executed with status ERROR .
Did anyone out there encounter this issue before, please do share if you have any clues.
Thanks in advance.
DevanFrank,
Both the trans.log are look a same:- Log below:-
4 ETW000 R3trans version 6.14 (release 700 - 14.02.08 - 14:55:00).
4 ETW000 unicode enabled version
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time : 28.02.2011 - 18:41:42
4 ETW000 control file: <no ctrlfile>
4 ETW000 R3trans was called as follows: R3trans -x
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 [dev trc ,00000] Mon Feb 28 18:41:42 2011 646 0.000646
4 ETW000 [dev trc ,00000] db_con_init called 112 0.000758
4 ETW000 [dev trc ,00000] create_con (con_name=R/3) 137 0.000895
4 ETW000 [dev trc ,00000] Loading DB library '/usr/sap/QAS/SYS/exe/run/dbdb6slib.so' ...
4 ETW000 279 0.001174
4 ETW000 [dev trc ,00000] load shared library (/usr/sap/QAS/SYS/exe/run/dbdb6slib.so), hdl 0
4 ETW000 18747 0.019921
4 ETW000 [dev trc ,00000] Library '/usr/sap/QAS/SYS/exe/run/dbdb6slib.so' loaded
4 ETW000 321 0.020242
4 ETW000 [dev trc ,00000] function DbSlExpFuns loaded from library /usr/sap/QAS/SYS/exe/run/dbdb6slib.so
4 ETW000 205 0.020447
4 ETW000 [dev trc ,00000] Version of '/usr/sap/QAS/SYS/exe/run/dbdb6slib.so' is "700.08", patchlevel (0.144)
4 ETW000 1353 0.021800
4 ETW000 [dev trc ,00000] function dsql_db_init loaded from library /usr/sap/QAS/SYS/exe/run/dbdb6slib.so
4 ETW000 193 0.021993
4 ETW000 [dev trc ,00000] function dbdd_exp_funs loaded from library /usr/sap/QAS/SYS/exe/run/dbdb6slib.so
4 ETW000 187 0.022180
4 ETW000 [dev trc ,00000] New connection 0 created 177 0.022357
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = -000000001 state = DISCONNECTED, perm = YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 222 0.022579
4 ETW000 [dev trc ,00000] db_con_connect (con_name=R/3) 125 0.022704
4 ETW000 [dev trc ,00000] find_con_by_name found the following connection for reuse:
4 ETW000 174 0.022878
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = 000000000 state = DISCONNECTED, perm = YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 205 0.023083
4 ETW000 [dev trc ,00000] DB2 library successfully loaded DB2 library '/usr/sap/QAS/SYS/global/db6/SUNOS_64/db6_clidriver/lib/libdb2.so' successfully loaded
4 ETW000 64288 0.087371
4 ETW000 [dev trc ,00000] DB6 (DB2 UDB) UNICODE database interface 700.08 [opt]
4 ETW000 201 0.087572
4 ETW000 [dev trc ,00000] DB6 shared library (dbdb6slib) patchlevels 112 0.087684
4 ETW000 [dev trc ,00000] (0.8) DB6: V8.2.2 optguidelines in OPEN SQL (note 150037)
4 ETW000 176 0.087860
4 ETW000 [dev trc ,00000] (0.8) Support of SDBUPDEXCL (note 847616) 117 0.087977
4 ETW000 [dev trc ,00000] (0.9) DB6: use export file for dbdb6slib (note 835135)
4 ETW000 185 0.088162
4 ETW000 [dev trc ,00000] (0.9) DB6: Core in getAndBindSQLDA (note 833183)
4 ETW000 191 0.088353
terminal. (note 1129573)
4 ETW000 192 0.096107
4 ETW000 [dev trc ,00000] (0.144) MSSQL: ODBC fastload on separate connection (note 1131805)
4 ETW000 179 0.096286
4 ETW000 [dev trc ,00000] Supported features: 114 0.096400
4 ETW000 [dev trc ,00000] ..retrieving configuration parameters 114 0.096514
4 ETW000 [dev trc ,00000] ..done 476 0.096990
4 ETW000 [dev trc ,00000] Running with UTF-8 Unicode 117 0.097107
4 ETW000 [dev trc ,00000] Running with CLI driver 11927 0.109034
4 ETW000 [dev trc ,00000] Mon Feb 28 18:41:43 2011 194952 0.303986
4 ETW000 [dev trc ,00000] *** ERROR in DB6Connect[dbdb6.c, 1640] CON = 0 (BEGIN)
4 ETW000 260 0.304246
4 ETW000 [dev trc ,00000] &+ DbSlConnectDB6( SQLConnect ): [IBM][CLI Driver] SQL30081N A communication error has been detected. Communication
4 ETW000 201 0.304447
4 ETW000 [dev trc ,00000] &+ protocol being used: "TCP/IP". Communication API being used: "SOCKETS". Location where the error was detected:
4 ETW000 195 0.304642
4 ETW000 [dev trc ,00000] &+ "172.21.32.13". Communication function detecting the error: "connect". Protocol specific error code(s): "146", "
4 ETW000 200 0.304842
4 ETW000 [dev trc ,00000] &+ ", "". SQLSTATE=08001
4 ETW000 212 0.305054
4 ETW000 [dev trc ,00000] &+
4 ETW000 196 0.305250
4 ETW000 [dev trc ,00000] &+
4 ETW000 224 0.305474
4 ETW000 [dev trc ,00000] &+
4 ETW000 200 0.305674
4 ETW000 [dev trc ,00000] *** ERROR in DB6Connect[dbdb6.c, 1640] (END) 122 0.305796
4 ETW000 [dbdb6.c ,00000] *** ERROR => DbSlConnect to 'QAS' as 'sapqas' failed
4 ETW000 526 0.306322
2EETW169 no connect possible: "DBMS = DB6 --- DB2DBDFT = 'QAS'"
Output of the db command you requested:-
bash-3.00$ db2 list db directory
System Database Directory
Number of entries in the directory = 1
Database 1 entry:
Database alias = QAS
Database name = QAS
Local database directory = /db2/QAS
Database release level = c.00
Comment = SAP database QAS
Directory entry type = Indirect
Catalog database partition number = 0
Alternate server hostname =
Alternate server port number =
bash-3.00$ db2 list node directory (not sure why cant see this output, tried run as db2<sid> too)
SQL1027N The node directory cannot be found.
bash-3.00$ db2 get dbm cfg | grep SVCENAME
TCP/IP Service name (SVCENAME) = sapdb2QAS
Regards, -
Error in Import Abap step for MI 7.1on AIX oracle
hi guys,
i am installing sap MI 7.1 on AIX on oracle.while installing i am getting the following error in the import abap step
INFO: 2011-01-28 04:15:08
Data codepage 1100 is determined using TOC file '/oracle/MIP/oraarch/51033237/DATA_UNITS/EXPORT_1/DATA/REPOSRC.TOC' for package 'REPOSRC'.
TRACE: 2011-01-28 04:15:09 com.sap.inst.migmon.LoadTask run
Loading of 'DOKCLU' import package is started.
TRACE: 2011-01-28 04:15:09 com.sap.inst.migmon.LoadTask processPackage
Loading of 'DOKCLU' import package into database:
/usr/sap/MIP/SYS/exe/uc/rs6000_64/R3load -i DOKCLU.cmd -dbcodepage 4102 -l DOKCLU.log -stop_on_error -loadprocedure fast
ERROR: 2011-01-28 04:15:11 com.sap.inst.migmon.LoadTask run
Loading of 'DOKCLU' import package is interrupted with R3load error.
Process '/usr/sap/MIP/SYS/exe/uc/rs6000_64/R3load -i DOKCLU.cmd -dbcodepage 4102 -l DOKCLU.log -stop_on_error -loadprocedure fast' exited with return code 2.
For mode details see 'DOKCLU.log' file.
Standard error output:
sapparam: sapargv(argc, argv) has not been called!
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
WARNING: 2011-01-28 04:15:38
Cannot start import of packages with views because not all import packages with tables are loaded successfully.
WARNING: 2011-01-28 04:15:38
1 error(s) during processing of packages.
INFO: 2011-01-28 04:15:38
Import Monitor is stopped.
this is the log for DOKCLU
myCluster (127.18.Imp): 650: error when retrieving table description for physical table DOKCLU.
myCluster (127.18.Imp): 651: return code received from nametab is 2
myCluster (127.18.Imp): 294: error when retrieving physical nametab for table DOKCLU.
(CNV) ERROR: data conversion failed. rc = 2
(DB) INFO: disconnected from DB
/usr/sap/MIP/SYS/exe/uc/rs6000_64/R3load: job finished with 1 error(s)
/usr/sap/MIP/SYS/exe/uc/rs6000_64/R3load: END OF LOG: 20110128090816
/usr/sap/MIP/SYS/exe/uc/rs6000_64/R3load: START OF LOG: 20110128094510
/usr/sap/MIP/SYS/exe/uc/rs6000_64/R3load: sccsid @(#) $Id: //bas/710_REL/src/R3ld/R3load/R3ldmain.c#10 $ SAP
/usr/sap/MIP/SYS/exe/uc/rs6000_64/R3load: version R7.20/V1.4 [UNICODE]
Compiled Oct 25 2007 20:54:47
/usr/sap/MIP/SYS/exe/uc/rs6000_64/R3load -i DOKCLU.cmd -dbcodepage 4102 -l DOKCLU.log -stop_on_error -loadprocedure fast
DbSl Trace: ORA-1403 when accessing table SAPUSER
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): UTF8
(RTF) ########## WARNING ###########
Without ORDER BY PRIMARY KEY the exported data may be unusable for some databases
(DB) INFO: DOKCLU deleted/truncated #20110128094511
myCluster (127.18.Imp): 650: error when retrieving table description for physical table DOKCLU.
myCluster (127.18.Imp): 651: return code received from nametab is 2
myCluster (127.18.Imp): 294: error when retrieving physical nametab for table DOKCLU.
(CNV) ERROR: data conversion failed. rc = 2
(DB) INFO: disconnected from DB
/usr/sap/MIP/SYS/exe/uc/rs6000_64/R3load: job finished with 1 error(s)
/usr/sap/MIP/SYS/exe/uc/rs6000_64/R3load: END OF LOG: 20110128094511Hi,
Te problem seems to be a connection to Oracle.
Check the below note :
Note 400241 - Problems with ops$ or sapr3 connect to Oracle
Regards,
Nirmal.k -
SAP Ides ECC 6.0 Install: Import ABAP - Package SAPDODS Error - ORA-00903
Experts,
Good Morning!
I'm trying to install SAP IDES ECC 6.0 version on a Windows 2008 R2 Server with Oracle 11g DB (11.2).
System Info: 16GM RAM & 600GB Hdd. Prereqs passed.
I'm getting the following error during the Import ABAP phase (16 of 29) in the sapinst log:
"An error occurred while processing option Enhancement Package 6 for SAP ERP 6.0 > SAP Application Server ABAP > Oracle > Central System > Central System( Last error reported by the step: Program 'Migration Monitor' exits with error code 103. "
Here's the dump of import_monitor.java.log
java version "1.4.2_32"
Java(TM) 2 Runtime Environment, Standard Edition (build 4.1.012)
SAP Java Server VM (build 4.1.012 1.6-b03, Oct 21 2011 14:18:45 - 41_REL - optU - windows amd64 - 6 - bas2:161688 (mixed mode))
Import Monitor jobs: running 1, waiting 1, completed 141, failed 0, total 143.
Loading of 'SAPDODS' import package: ERROR
Import Monitor jobs: running 0, waiting 1, completed 141, failed 1, total 143.
Here's the dump of import_monitor.log:
INFO: 2014-07-05 13:42:53
Data codepage 4103 is determined using TOC file 'C:\Target\Export1\DATA\D010TAB.TOC' for package 'D010TAB'.
TRACE: 2014-07-05 13:42:53 com.sap.inst.migmon.LoadTask run
Loading of 'SAPDODS' import package is started.
TRACE: 2014-07-05 13:42:53 com.sap.inst.migmon.LoadTask processPackage
Loading of 'SAPDODS' import package into database:
C:\usr\sap\AVV\SYS\exe\uc\NTAMD64\R3load.exe -i SAPDODS.cmd -dbcodepage 4103 -l SAPDODS.log -stop_on_error
ERROR: 2014-07-05 13:42:54 com.sap.inst.migmon.LoadTask run
Loading of 'SAPDODS' import package is interrupted with R3load error.
Process 'C:\usr\sap\AVV\SYS\exe\uc\NTAMD64\R3load.exe -i SAPDODS.cmd -dbcodepage 4103 -l SAPDODS.log -stop_on_error' exited with return code 2.
For mode details see 'SAPDODS.log' file.
Standard error output:
sapparam: sapargv(argc, argv) has not been called!
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
WARNING: 2014-07-05 13:43:21
Cannot start import of packages with views because not all import packages with tables are loaded successfully.
WARNING: 2014-07-05 13:43:21
1 error(s) during processing of packages.
INFO: 2014-07-05 13:43:21
Import Monitor is stopped.
Here's the log of SAPDODS...
C:\usr\sap\AVV\SYS\exe\uc\NTAMD64\R3load.exe: START OF LOG: 20140705134253
C:\usr\sap\AVV\SYS\exe\uc\NTAMD64\R3load.exe: sccsid @(#) $Id: //bas/720_REL/src/R3ld/R3load/R3ldmain.c#13 $ SAP
C:\usr\sap\AVV\SYS\exe\uc\NTAMD64\R3load.exe: version R7.20/V1.4 [UNICODE]
Compiled Aug 16 2011 02:26:36
patchinfo (patches.h): (0.098) DB6: correction for R3load PL 91 on HP-UX and SOLARIS (note 1609719)
process id 1488
C:\usr\sap\AVV\SYS\exe\uc\NTAMD64\R3load.exe -i SAPDODS.cmd -dbcodepage 4103 -l SAPDODS.log -stop_on_error
DbSl Trace: ORA-1403 when accessing table SAPUSER
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): UTF16
(SQL) INFO: Searching for SQL file SQLFiles.LST
(SQL) INFO: SQLFiles.LST not found
(SQL) INFO: Searching for SQL file C:\Target\Export1\DB/SQLFiles.LST
(SQL) INFO: C:\Target\Export1\DB/SQLFiles.LST not found
(SQL) INFO: Searching for SQL file DODS.SQL
(SQL) INFO: DODS.SQL not found
(SQL) INFO: Searching for SQL file C:\Target\Export1\DB/ORA/DODS.SQL
(SQL) INFO: found C:\Target\Export1\DB/ORA/DODS.SQL
(SQL) INFO: Trying to open C:\Target\Export1\DB/ORA/DODS.SQL
(SQL) INFO: C:\Target\Export1\DB/ORA/DODS.SQL opened
(DB) ERROR: DDL statement failed
(DROP TABLE "/BI0/APERS_BOD00")
DbSlExecute: rc = 103
(SQL error 942)
error message returned by DbSl:
ORA-00942: table or view does not exist
(IMP) INFO: a failed DROP attempt is not necessarily a problem
DbSl Trace: Error 903 in exec_immediate() from oci_execute_stmt(), orpc=0
DbSl Trace: ORA-00903 occurred at SQL stmt (parse error offset=15)
(DB) ERROR: DDL statement failed
( CREATE TABLE [/BI0/APERS_BOD00] ( [TCTUSERNM] nvarchar(000012) NOT NULL , [TCTOBJVERS] nvarchar(000001) NOT NULL , [TCTSYSID] nvarchar(000010) NOT NULL , [TCTQUACT] nvarchar(000001) NOT NULL , [TCTOBJNM] nvarchar(000040) NOT NULL , [TCTTLOGO] nvarchar(000004) NOT NULL , [RECORDMODE] nvarchar(000001) NOT NULL , [TCTTIMSTMP] nvarchar(000014) NOT NULL ) WITH ( DATA_COMPRESSION = PAGE ) )
DbSlExecute: rc = 99
(SQL error 903)
error message returned by DbSl:
ORA-00903: invalid table name
(DB) INFO: disconnected from DB
C:\usr\sap\AVV\SYS\exe\uc\NTAMD64\R3load.exe: job finished with 1 error(s)
C:\usr\sap\AVV\SYS\exe\uc\NTAMD64\R3load.exe: END OF LOG: 20140705134254
FYI - A retry does not help. Also tried to search for the error on scn, google but haven't been able to find the right solution.
Can you help?
Regards,
Cobain.Divyanshu - sorry to ask but can you explain why i need to update r3load and r3trans to resolve this error? Just want to understand why I'm doing a correction so I can learn from the same.
Also, can you clarify the file update process:
For R3load:
a) the r3load used by the command is dated 8/16/2011 (location:C:\usr\sap\AVV\SYS\exe\uc\NTAMD64\...)
b) the r3load i have in my db folder is dated 10/23/2011 (location:C:\Final\Installer\BS7i2011_Installation_Master_\DATA_UNITS\BS2011_IM_WINDOWS_X86_64\ORA\UC\...)
Do i replace (a) with (b)?
For R3trans:
How do I update this file?
- Cobain. -
Import ABAP error in ERP 2005 SR2 IDES installation
Hi Experts
I am trying to install the SAP ERP 2005 SR2 ( OS is 2003 and Database is Oracle 10g )IDES which i downloaded from the SAP market place and got
the following error at the IMPORT ABAP task
INFO 2008-02-20 14:19:37
Output of C:\Program Files\Java\j2re1.4.2_16\bin\java.exe -classpath migmon.jar -showversion
com.sap.inst.migmon.imp.ImportMonitor -dbType ORA -importDirs "D:\ERP 2005 IDES\51032413_1\EXP1;
D:\ERP 2005 IDES\51032413_2\EXP2;D:\ERP 2005 IDES\51032413_3\EXP3;D:\ERP 2005 IDES\51032413_4\EXP4;
D:\ERP 2005 IDES\51032413_5\EXP5;D:\ERP 2005 IDES\51032413_6\EXP6;D:\ERP 2005 IDES\51032413_6\EXP7;
D:\ERP 2005 IDES\51032413_6\EXP8;D:\ERP 2005 IDES\51032413_6\EXP9;D:\ERP 2005 IDES\51032413_6\EXP10;
D:\ERP 2005 IDES\51032413_6\EXP11" -installDir C:\PROGRA1\SAPINS1\ERP\SYSTEM\ORA\CENTRAL\AS
-orderBy "" -r3loadExe D:\usr\sap\SRD\SYS\exe\nuc\NTI386\R3load.exe -tskFiles yes -extFiles yes -dbCodepage 1100
-jobNum 3 -monitorTimeout 30 -loadArgs " -stop_on_error" -trace all -sapinst is written to the logfile import_monitor.java.log.
WARNING 2008-02-20 14:31:07
Execution of the command "C:\Program Files\Java\j2re1.4.2_16\bin\java.exe -classpath migmon.jar -showversion
com.sap.inst.migmon.imp.ImportMonitor -dbType ORA -importDirs "D:\ERP 2005 IDES\51032413_1\EXP1;
D:\ERP 2005 IDES\51032413_2\EXP2;D:\ERP 2005 IDES\51032413_3\EXP3;D:\ERP 2005 IDES\51032413_4\EXP4;
D:\ERP 2005 IDES\51032413_5\EXP5;D:\ERP 2005 IDES\51032413_6\EXP6;D:\ERP 2005 IDES\51032413_6\EXP7;
D:\ERP 2005 IDES\51032413_6\EXP8;D:\ERP 2005 IDES\51032413_6\EXP9;D:\ERP 2005 IDES\51032413_6\EXP10;
D:\ERP 2005 IDES\51032413_6\EXP11" -installDir C:\PROGRA1\SAPINS1\ERP\SYSTEM\ORA\CENTRAL\AS
-orderBy "" -r3loadExe D:\usr\sap\SRD\SYS\exe\nuc\NTI386\R3load.exe -tskFiles yes -extFiles yes -dbCodepage 1100
-jobNum 3 -monitorTimeout 30 -loadArgs " -stop_on_error" -trace all -sapinst" finished with return code 103.
Output: java version "1.4.2_16"Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_16-b05)Java HotSpot(TM)
Client VM (build 1.4.2_16-b05, mixed mode)Import Monitor jobs: running 1, waiting 18, completed 0, failed 0, total 19.
Loading of 'SAPSDIC' import package: ERRORImport Monitor jobs: running 0, waiting 18, completed 0, failed 1, total 19.
ERROR 2008-02-20 14:31:07
CJS-30022 Program 'Migration Monitor' exits with error code 103. For details see log file(s) import_monitor.java.log, import_monitor.log.
ERROR 2008-02-20 14:31:07
FCO-00011 The step runMigrationMonitor with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW
CreateDBandLoad|ind|ind|ind|ind|10|0|NWABAP_Import_Dialog|ind|ind|ind|ind|5|0|NW_ABAP_Import|ind|ind|ind|ind|0|0|runMigrationMonitor
was executed with status ERROR .
can anyone help me to fix this error. Installation of ECC 6.0 with SQL SERVER 2005 was done fine.
Thanking you
Regards
MrudulHi Mrudul,
Understood you have downloaded the completed IDES SAP 2005 SR2 package, i have also downloaded it several months ago, but i found the package not full good when i prepare to install it last week, 3 of 35 Exp unpackage CRC32 error(51032413_part15.rar & 51032413_part16.rar & 51032413_part17.rar) when unpackage them, can you do me a favor to share me the 3 rar files? As the original download address have been obsoleted away service.sap.com, i can tell you my FTP site to store them.
51032413_part15.rar & 51032413_part16.rar & 51032413_part17.rar
Or 51032413_3\EXP3\DATA\SAPAPPL1.009 & SAPAPPL1.010
12/17/2006 02:32 AM 1,048,576,000 SAPAPPL1.009
12/17/2006 02:42 AM 954,643,456 SAPAPPL1.010
Tks!
Best rds,
Jeff
msn: [email protected] -
DB2 9.7 DFACT.SQL syntax error in Import ABAP phase - System Copy
Hi all. I'm trying a system copy with a source system SAP ECC 6.0 ehp4 based on NW 701 and db2 LUW 9.1 .
As it seems supported by SAP, i'm using db2 LUW 9.7 in target system.
O.S. is Windows 2008.
I got an error in phase "Import ABAP".
Sapinst.log says:
INFO 2010-02-18 10:12:14.337
An error occured and the user decided to retry the current step: "|NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_ABAP_Import_Dialog|ind|ind|ind|ind|5|0|NW_ABAP_Import|ind|ind|ind|ind|0|0|runMigrationMonitor".
INFO 2010-02-18 10:12:14.509
Switched to user: devadm.
INFO 2010-02-18 10:12:14.572
Creating file C:\Program Files\sapinst_instdir\ERPEhP4\LM\COPY\DB6\SYSTEM\CENTRAL\AS-ABAP\import_monitor.java.log.
INFO 2010-02-18 10:12:14.603
Switched to user: devadm.
INFO 2010-02-18 10:12:14.618
Working directory changed to C:\Program Files\sapinst_instdir\ERPEhP4\LM\COPY\DB6\SYSTEM\CENTRAL\AS-ABAP.
INFO 2010-02-18 10:12:14.618
Output of C:\j2sdk1.4.2_24-x64\bin\java.exe -classpath migmon.jar -showversion -Xmx1024m com.sap.inst.migmon.imp.ImportMonitor -sapinst is written to the logfile import_monitor.java.log.
WARNING 2010-02-18 10:12:44.790
Execution of the command "C:\j2sdk1.4.2_24-x64\bin\java.exe -classpath migmon.jar -showversion -Xmx1024m com.sap.inst.migmon.imp.ImportMonitor -sapinst" finished with return code 103. Output:
java version "1.4.2_24-rev"
Java(TM) Platform, Standard Edition for Business (build 1.4.2_24-rev-b06)
Java HotSpot(TM) 64-Bit Server VM (build 1.4.2_24-rev-b06, mixed mode)
Import Monitor jobs: running 1, waiting 1, completed 73, failed 0, total 75.
Loading of 'SAPDFACT' import package: ERROR
Import Monitor jobs: running 0, waiting 1, completed 73, failed 1, total 75.
WARNING[E] 2010-02-18 10:12:44.790
CJS-30022 Program 'Migration Monitor' exits with error code 103. For details see log file(s) import_monitor.java.log, import_monitor.log.
ERROR 2010-02-18 10:12:44.790
FCO-00011 The step runMigrationMonitor with step key |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_ABAP_Import_Dialog|ind|ind|ind|ind|5|0|NW_ABAP_Import|ind|ind|ind|ind|0|0|runMigrationMonitor was executed with status ERROR .
Looking into import_monitor.java.log i found that the problem is in dfact import.
I've looked into sapdfact.log and i found:
S:\usr\sap\DEV\SYS\exe\uc\NTAMD64\R3load.exe: START OF LOG: 20100218105045
S:\usr\sap\DEV\SYS\exe\uc\NTAMD64\R3load.exe: sccsid @(#) $Id: //bas/701_REL/src/R3ld/R3load/R3ldmain.c#8 $ SAP
S:\usr\sap\DEV\SYS\exe\uc\NTAMD64\R3load.exe: version R7.01/V1.4 [UNICODE]
Compiled Jan 28 2010 20:22:25
S:\usr\sap\DEV\SYS\exe\uc\NTAMD64\R3load.exe -i SAPDFACT.cmd -dbcodepage 4103 -l SAPDFACT.log -stop_on_error -loadprocedure fast LOAD:COMPRESS_ALL
(DB) INFO: connected to DB
(DB6) INFO: COMPRESS YES is set during table creation.
(DB6) DB2 9.5 automatic dictionary creation does not require an explicit REORG.
(DB6) Compression threshold is ignored.
(GSI) INFO: dbname = "DEV "
(GSI) INFO: vname = "DB6 "
(GSI) INFO: hostname = "UNKNOWN "
(GSI) INFO: sysname = "Windows NT"
(GSI) INFO: nodename = "SRVSAPDEV"
(GSI) INFO: release = "6.0"
(GSI) INFO: version = "6002 Service Pack 2"
(GSI) INFO: machine = "4x AMD64 Level 6 (Mod 26 Step 5)"
(DB) ERROR: DDL statement failed with SQL error
( ALTER TABLE "/BI0/E0PPM_VC1" DROP PRIMARY KEY )
(SQL error -539)
error message returned by dsql:
SQL0539N Table or nickname "SAPDEV./BI0/E0PPM_VC1" does not have a "PRIMARY" key. SQLSTATE=42888
(IMP) INFO: a failed DROP attempt is not necessarily a problem
(DB6) INFO: executing DDL statements for object /BI0/E0PPM_VC1 from external SQL file.
(DB) ERROR: DDL statement failed with SQL error
( CREATE TYPE 2 UNIQUE INDEX "/BI0/E0PPM_VC1~0" ON "/BI0/E0PPM_VC1" ("KEY_0PPM_VC1T" , "KEY_0PPM_VC11" , "KEY_0PPM_VC1U" , "KEY_0PPM_VC1P" ) USING STOGROUP ___FAI PRIQTY 16 SECQTY 10240 FREEPAGE 0 PCTFREE 0 GBPCACHE CHANGED DEFINE NO BUFFERPOOL BP3 COPY NO PIECESIZE 2097152 K CLUSTER NOT PADDED )
(SQL error -7)
error message returned by dsql:
SQL0007N The character "_" following "" ) USING STOGROUP" is not valid. SQLSTATE=42601
(DB) INFO: disconnected from DB
S:\usr\sap\DEV\SYS\exe\uc\NTAMD64\R3load.exe: job finished with 1 error(s)
S:\usr\sap\DEV\SYS\exe\uc\NTAMD64\R3load.exe: END OF LOG: 20100218105045
So as you can see it seems that there's some syntax error in dfacl.log. The wrong SQL statement referred by sapdfact.log is
ind: /BI0/E0PPM_VC1~0
sql: CREATE TYPE 2 UNIQUE INDEX "/BI0/E0PPM_VC1~0" ON "/BI0/E0PPM_VC1"
("KEY_0PPM_VC1T" ,
"KEY_0PPM_VC11" ,
"KEY_0PPM_VC1U" ,
"KEY_0PPM_VC1P" )
USING STOGROUP ___FAI PRIQTY 16
SECQTY 10240 FREEPAGE 0 PCTFREE 0
GBPCACHE CHANGED DEFINE NO
BUFFERPOOL BP3 COPY NO
PIECESIZE 2097152 K CLUSTER NOT PADDED ;
|
ALTER TABLE "/BI0/E0PPM_VC1"
ADD PRIMARY KEY ("KEY_0PPM_VC1T",
"KEY_0PPM_VC11",
"KEY_0PPM_VC1U",
"KEY_0PPM_VC1P") ;
Am i missing something?
Data in referred tables (infocubes) isn't really important.
Is there a safe way to proceed?
Thanks in advance.
Regards
Simone ZaffalonAnd this is the strange point: my source system is not a BI and my dataclasses .SQL files are not empty.
Me too i would expect that the files should be empty but instead they are full of object definitions.
For example i have APPL0.SQL that contains a list of all tables of ECC system, for example
tab: MAMT
sql: CREATE TABLE "MAMT"
("MANDT" SAPDB6VARCHAR(000003)
DEFAULT '000' NOT NULL,
"MATNR" SAPDB6VARCHAR(000018)
DEFAULT ' ' NOT NULL,
"SPRAS" SAPDB6VARCHAR(000001)
DEFAULT ' ' NOT NULL,
"MEINH" SAPDB6VARCHAR(000003)
DEFAULT ' ' NOT NULL,
"MTXID" SAPDB6VARCHAR(000002)
DEFAULT ' ' NOT NULL,
"LFDNR" SAPDB6VARCHAR(000002)
DEFAULT '00' NOT NULL,
"MAKTM" SAPDB6VARCHAR(000040)
DEFAULT ' ' NOT NULL)
IN "&location&"
INDEX IN "&locationI&"
LONG IN "&locationL&"
COMPRESS YES;
ALTER TABLE "MAMT" LOCKSIZE ROW;
and like this for all others tables.
What would occur if i launch an import with such .SQL files?
(shuld i put this question to another thread or is fine for you to answer on this?)
Thank you again.
Simone Zaffalon -
Installation error phase "import ABAP" - ERP2005 IDES - mssql2005
Hi.
I've problems installing <b>ERP2005 IDES</b> with <b>microsoft sql server 2005</b> at <b>windows 2003server x64</b>.
I've installed solution manager 4.0 succesfylly at the same host.
I've read about simular problems at this forum (with oracle). But no solutions for me.
Error in phase "Import ABAP":
CJS-30022 Program 'Migration Monitor' exits with error code 103.
For details see log file(s) import_monitor.java.log, import_monitor.log
IMPORT_MONITOR.LOG:
ERROR: 2007-10-05 17:29:12 com.sap.inst.migmon.LoadTask run
Loading of 'SAPSDIC' import package is interrupted with R3load error.
Process 'E:\usr\sap\E01\SYS\exe\nuc\NTAMD64\R3load.exe -i SAPSDIC.cmd -dbcodepage 1100 -l SAPSDIC.log -loadprocedure fast' exited with return code 2.
For mode details see 'SAPSDIC.log' file.
Standard error output:
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
SAPSDIC.LOG:
(IMP) INFO: ExeFastLoad failed with <2: BCP Commit failed>
(IMP) ERROR: ExeFastload: rc = 2
(DB) INFO: F4UHLP~1 created
In SAPSDIC.tsk I find one error:
D F4UHLP I err
I want to install nonunicode, but I've tried to install unicode with the same result.
I've also recieving this error in a log-file:
<b>sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline</b>I understand that I manually can set the parameter SAPSYSTEMNAME in control.xml, but I've dont know where and if this is a good solution?
This is what i've been trying without success:
-Uninstalled the instance and deleted inst_dir/erp.
-Environment variable is set like inst_guide describes
-Paging Files is ok
-Access to table F4UHLP is ok
Can anybody help me? Please? I'm desperate.
Kindly regards
Harald Vedvik
Message was edited by:
Harald Vedvik
Message was edited by:
Harald VedvikHi again.
I posted my logs in the beginning of this thread, but if you want a more detailed
b]sapinst.log</b>:
<i>WARNING 2007-10-08 13:00:48
Errors when executing sql command: <p nr="0"/> If this message is displayed as a warning - it can be ignored. If this is an error - call your SAP support.
INFO 2007-10-08 13:00:49
Execute step doGrantServiceRights of component |NW_Onehost|ind|ind|ind|ind|00|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssOsUser|ind|ind|ind|ind|11|2.
INFO 2007-10-08 13:01:27
Output of C:\j2sdk1.4.2_15-x64\bin\java.exe -classpath migmon.jar -showversion com.sap.inst.migmon.imp.ImportMonitor -dbType MSS -importDirs E:\ERP2005IDES\Export\51032413_1\EXP1;E:\ERP2005IDES\Export\51032413_2\EXP2;E:\ERP2005IDES\Export\51032413_3\EXP3;E:\ERP2005IDES\Export\51032413_4\EXP4;E:\ERP2005IDES\Export\51032413_5\EXP5;E:\ERP2005IDES\Export\51032413_6\EXP6;E:\ERP2005IDES\Export\51032413_6\EXP7;E:\ERP2005IDES\Export\51032413_6\EXP8;E:\ERP2005IDES\Export\51032413_6\EXP9;E:\ERP2005IDES\Export\51032413_6\EXP10;E:\ERP2005IDES\Export\51032413_6\EXP11 -installDir D:\sapinst_instdir -orderBy "" -r3loadExe E:\usr\sap\E01\SYS\exe\nuc\NTAMD64\R3load.exe -tskFiles yes -extFiles no -dbCodepage 1100 -jobNum 3 -monitorTimeout 30 -loadArgs " -loadprocedure fast" -trace all -sapinst is written to the logfile import_monitor.java.log.
WARNING 2007-10-08 13:17:59
Execution of the command "C:\j2sdk1.4.2_15-x64\bin\java.exe -classpath migmon.jar -showversion com.sap.inst.migmon.imp.ImportMonitor -dbType MSS -importDirs E:\ERP2005IDES\Export\51032413_1\EXP1;E:\ERP2005IDES\Export\51032413_2\EXP2;E:\ERP2005IDES\Export\51032413_3\EXP3;E:\ERP2005IDES\Export\51032413_4\EXP4;E:\ERP2005IDES\Export\51032413_5\EXP5;E:\ERP2005IDES\Export\51032413_6\EXP6;E:\ERP2005IDES\Export\51032413_6\EXP7;E:\ERP2005IDES\Export\51032413_6\EXP8;E:\ERP2005IDES\Export\51032413_6\EXP9;E:\ERP2005IDES\Export\51032413_6\EXP10;E:\ERP2005IDES\Export\51032413_6\EXP11 -installDir D:\sapinst_instdir -orderBy "" -r3loadExe E:\usr\sap\E01\SYS\exe\nuc\NTAMD64\R3load.exe -tskFiles yes -extFiles no -dbCodepage 1100 -jobNum 3 -monitorTimeout 30 -loadArgs " -loadprocedure fast" -trace all -sapinst" finished with return code 103. Output:
java version "1.4.2_15"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_15-b02)
Java HotSpot(TM) 64-Bit Server VM (build 1.4.2_15-b02, mixed mode)
Import Monitor jobs: running 1, waiting 18, completed 0, failed 0, total 19.
Loading of 'SAPSDIC' import package: ERROR
Import Monitor jobs: running 0, waiting 18, completed 0, failed 1, total 19.
ERROR 2007-10-08 13:17:59
CJS-30022 Program 'Migration Monitor' exits with error code 103. For details see log file(s) import_monitor.java.log, import_monitor.log.
ERROR 2007-10-08 13:17:59
FCO-00011 The step runMigrationMonitor with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_ABAP_Import_Dialog|ind|ind|ind|ind|5|0|NW_ABAP_Import|ind|ind|ind|ind|0|0|runMigrationMonitor was executed with status ERROR .</i>
<b>import_monitor.log:</b><i>INFO: 2007-10-08 13:01:29
Import Monitor is started.
CONFIG: 2007-10-08 13:01:29
Application options:
dbCodepage=1100
dbType=MSS
extFiles=no
importDirs=E:\ERP2005IDES\Export\51032413_1\EXP1;E:\ERP2005IDES\Export\51032413_2\EXP2;E:\ERP2005IDES\Export\51032413_3\EXP3;E:\ERP2005IDES\Export\51032413_4\EXP4;E:\ERP2005IDES\Export\51032413_5\EXP5;E:\ERP2005IDES\Export\51032413_6\EXP6;E:\ERP2005IDES\Export\51032413_6\EXP7;E:\ERP2005IDES\Export\51032413_6\EXP8;E:\ERP2005IDES\Export\51032413_6\EXP9;E:\ERP2005IDES\Export\51032413_6\EXP10;E:\ERP2005IDES\Export\51032413_6\EXP11
installDir=D:\sapinst_instdir
jobNum=3
loadArgs= -loadprocedure fast
monitorTimeout=30
orderBy=
r3loadExe=E:\usr\sap\E01\SYS\exe\nuc\NTAMD64\R3load.exe
sapinst=
trace=all
tskFiles=yes
CONFIG: 2007-10-08 13:01:29
List of packages with table structure: 'SAP0000'.
CONFIG: 2007-10-08 13:01:29
List of packages with views: 'SAPVIEW'.
TRACE: 2007-10-08 13:01:29 com.sap.inst.migmon.imp.ImportStandardTask preCreate
Parse of 'D:\sapinst_instdir\DDLMSS.TPL' template file is started.
INFO: 2007-10-08 13:01:29 com.sap.inst.migmon.imp.ImportStandardTask preCreate
Parse of 'D:\sapinst_instdir\DDLMSS.TPL' template file is successfully completed.
Primary key creation: before load.
Index creation: after load.
INFO: 2007-10-08 13:01:29
Data codepage 4103 is determined using TOC file 'E:\ERP2005IDES\Export\51032413_1\EXP1\DATA\SAPAPPL0.TOC' for package 'SAPAPPL0'.
INFO: 2007-10-08 13:01:32
Version table 'SVERS' is found in STR file 'E:\ERP2005IDES\Export\51032413_4\EXP4\DATA\SAPSDIC.STR' from package 'SAPSDIC'.
INFO: 2007-10-08 13:01:32
Data conversion tables 'DDNTF,DDNTF_CONV_UC,DDNTT,DDNTT_CONV_UC' are found in STR file 'E:\ERP2005IDES\Export\51032413_4\EXP4\DATA\SAPSDIC.STR' from package 'SAPSDIC'.
TRACE: 2007-10-08 13:01:33 com.sap.inst.migmon.LoadTask run
Loading of 'SAPSDIC' import package is started.
TRACE: 2007-10-08 13:01:33 com.sap.inst.migmon.LoadTask processPackage
Task file generation for 'SAPSDIC' import package:
E:\usr\sap\E01\SYS\exe\nuc\NTAMD64\R3load.exe -ctf I E:\ERP2005IDES\Export\51032413_4\EXP4\DATA\SAPSDIC.STR D:\sapinst_instdir\DDLMSS.TPL SAPSDIC.TSK MSS -l SAPSDIC.log
TRACE: 2007-10-08 13:01:33 com.sap.inst.migmon.LoadTask processPackage
Loading of 'SAPSDIC' import package into database:
E:\usr\sap\E01\SYS\exe\nuc\NTAMD64\R3load.exe -i SAPSDIC.cmd -dbcodepage 1100 -l SAPSDIC.log -loadprocedure fast
ERROR: 2007-10-08 13:17:46 com.sap.inst.migmon.LoadTask run
Loading of 'SAPSDIC' import package is interrupted with R3load error.
Process 'E:\usr\sap\E01\SYS\exe\nuc\NTAMD64\R3load.exe -i SAPSDIC.cmd -dbcodepage 1100 -l SAPSDIC.log -loadprocedure fast' exited with return code 2.
For mode details see 'SAPSDIC.log' file.
Standard error output:
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
WARNING: 2007-10-08 13:17:59
Cannot continue import because not all import packages with data conversion tables are loaded successfully.
WARNING: 2007-10-08 13:17:59
1 error(s) during processing of packages.
INFO: 2007-10-08 13:17:59
Import Monitor is stopped.</i>
Do you need more than alredy posted for sapsdic.log?
SAPSDIC.LOG:
<i>(IMP) INFO: ExeFastLoad failed with <2: BCP Commit failed>
(IMP) ERROR: ExeFastload: rc = 2
(DB) INFO: F4UHLP~1 created</i>
I dont know if you recive my points? I've been giving you points:)
best regards
Harald -
Phase import abap (problem in the import of the export)
Hello!:
We are doing the IMPORT of the EXPORT (for the CU&UC), and has appears the next error in the IMPORT ABAP PHASE:
(GSI) INFO: vname = "MSSQL "
(GSI) INFO: hostname = "IBA3SAP\MIG "
(GSI) INFO: sysname = "Windows NT"
(GSI) INFO: nodename = "IBA3SAP"
(GSI) INFO: release = "5.2"
(GSI) INFO: version = "3790 Service Pack 2"
(GSI) INFO: machine = "2x IA64 Level 31 (Mod 1 Step 5)"
(DB) INFO: ACCTIT created
(DB) INFO: ACCTIT~0 created
Interface access functions from dynamic library dbmssslib.dll loaded.
(IMP) INFO: ExeFastLoad failed with <2: BCP Commit failed>
(IMP) ERROR: ExeFastload: rc = 2
(DB) INFO: ACCTIT~1 created
(DB) INFO: disconnected from DB
M:\usr\sap\MIG\SYS\exe\uc\NTIA64\R3load.exe: job finished with 1 error(s)
M:\usr\sap\MIG\SYS\exe\uc\NTIA64\R3load.exe: END OF LOG: 20080409193447
Can you help me?
Thanks and regards,
Alfredo.IMPORT_MONITOR.LOG
ERROR: 2008-04-09 19:34:48 com.sap.inst.migmon.LoadTask run
Loading of 'ACCTIT' import package is interrupted with R3load error.
Process 'M:\usr\sap\MIG\SYS\exe\uc\NTIA64\R3load.exe -i ACCTIT.cmd -dbcodepage 4103 -l ACCTIT.log -loadprocedure fast' exited with return code 2.
For mode details see 'ACCTIT.log' file.
Standard error output:
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
ERROR: 2008-04-09 19:53:03 com.sap.inst.migmon.LoadTask run
Loading of 'SAPAPPL1_34' import package is interrupted with R3load error.
Process 'M:\usr\sap\MIG\SYS\exe\uc\NTIA64\R3load.exe -i SAPAPPL1_34.cmd -dbcodepage 4103 -l SAPAPPL1_34.log -loadprocedure fast' exited with return code 2.
For mode details see 'SAPAPPL1_34.log' file.
Standard error output:
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
ERROR: 2008-04-09 22:08:11 com.sap.inst.migmon.LoadTask run
Loading of 'SAPAPPL1_67' import package is interrupted with R3load error.
Process 'M:\usr\sap\MIG\SYS\exe\uc\NTIA64\R3load.exe -i SAPAPPL1_67.cmd -dbcodepage 4103 -l SAPAPPL1_67.log -loadprocedure fast' exited with return code 2.
For mode details see 'SAPAPPL1_67.log' file.
Standard error output:
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
ERROR: 2008-04-10 08:22:35 com.sap.inst.migmon.LoadTask run
Loading of 'SAPAPPL0_17' import package is interrupted with R3load error.
Process 'M:\usr\sap\MIG\SYS\exe\uc\NTIA64\R3load.exe -i SAPAPPL0_17.cmd -dbcodepage 4103 -l SAPAPPL0_17.log -loadprocedure fast' exited with return code 2.
For mode details see 'SAPAPPL0_17.log' file.
Standard error output:
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
Maybe you are looking for
-
XML Validation..in JSP (Exception Problem)
Hello all, Below is a .JSP program, which validates an .XML ("validate.xml") file residing in the same container as the JSP. It throws all the possible exception for all possible errors in an XML file(& prints them in a TextArea), but it terminates a
-
Select and move multiple keyframs
I just switched from Adobe Premier Elements on a PC to FCE 4. In PrEl, you can select multiple keyframes in their equivalent of the Viewer, you can them move them as a group. (Select them shift click or drag a square around them.) This is really usef
-
Date field sorts with Null values
We have small oracle database which is used for third party application/driver. Several tables have date type fields and somehow this driver converts null value into 01/01/0001 in some cases. However when we do select * from table order by date_field
-
Best Practice to process change request
Hi All, There's a confusion of provided functionality by SAP for Change Request Management. Though, through different blogs/articles/book, we have implemented change request management, but initiation process of change request seems missing. What I k
-
I am about to purchase a wonderful item that is made by Sony and is actually a hard drive that will connect to my large screen TV and allow my photos to play in slideshow format. But the snag is that the retailer can't tell me if it's Mac compatible