Error c000021a : {fatal system error} while booting laptop M30 series

I get the following error when starting my laptop.
"Stop: c00021a {fatal system error} The windows logon process system process terminated unexpectedly with a status of 0x00000080 (0x00000000 0x00000000)
The system has been shut down"
I have recovery CD provided to at the time of purchase. I have some data which I need to recover. If anyone knows resolution to this problem , please let me know the procedure.
Thanking you in advance.
-YG

Hi,
I tried the link said above but didnt help. I was still getting the same error.
What I tried is loading a OS of different vesion (in my case XP Professional). This loaded succesfully and I could recover some of my data. For some data, I am getting access rights error.
I am finding out if there is any way I can fully recover my data.
Thanks for your help,

Similar Messages

Boot Camp STOP: c000021a {Fatal System Error}

I was restarting my Mac Pro using Bootcamp and the following blue screen message displays:
Boot Camp STOP: c000021a {Fatal System Error}
The Windows Logon Process system process terminated unexpectedly with a status of 0x0000135 (0x00000000 0x00000000).
The system has been shut down.
I am running Lion and Windows XP - I have been using this setup successfully for months.
I have tried putting both the Windows XP disc and the OSX disc (Snow Leopard - upgraded to Lion from an App download) in the drive, holding down the 'c' key (to allow the machine to boot from the dvd drive) but it just goes to a black screen and switches off.
Any help to boot up my MacPro would be very much appreciated - I would be happy just to boot it up normally without Windows.
Thanks,
May

http://www.bing.com/search?q=0xc0000135+error+vista
Upgrade to Windows 7 (or 8) is really a good idea if you want support, security, better use of resources.
You restarted into Windows (*Boot Camp does not run - anything)
Lion does not support XP but that just means you had it before.
No idea but I can't tell if XP And Lion are on the same hard drive (they should not if possible).
You should make bootable backups of your OS (both).
Pull your hard drives.
Boot into Lion Recovery.
Maybe you have a virus or hardware issue, it is impossible to know.

BSOD Error while booting Thinkpad L440

Link to image
Hi All,
I'm getting a BSOD Error while booting my Lenovo Thinkpad L440 system.
Please help.
Moderator note: large image(s) converted to link(s): About Posting Pictures In The Forums

Hello,
To troubleshoot the issue, you need review the dump file. We may find out the which file or driver is triggering a BSOD. And in most cases, BSOD is triggered by driver issue.
Are you doing OS deployment via bootable pendeivce? How do you created the boot image?
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Error while booting maverick

error while booting maverick

The most likely causes of this error are:
1) Failing to execute tmloadcf after updating the UBBCONFIG file.
2) Failing to set TUXDIR correctly in the UBBCONFIG file.
3) Failing to set TUXCONFIG, PATH, or
LD_LIBRARY_PATH(Unix)/SHLIB_PATH(HP)/LIBPATH(AIX) correctly in your
enviroment.when executing tmboot or tlisten.
You should verify that your environment is set correctly and you should
execute tmunloadcf to see the contents of the configuration file that has
been loaded.
Ed
<Kaustubh Deoghare> wrote in message news:[email protected]..
Hello,
I am getting following error while booting tuxedo
exec TMS_ORACLE8I -A :
TMS_ORACLE8I: symbol lookup error: TMS_ORACLE8I: undefined symbol:
kgsmp789_compat_
CMDTUX_CAT:819: INFO: Process id=2568 Assume started (pipe).
Though I have installed Oracle9i, in ubbconfig it is still taking
TMS_ORACLE8I and hence trying to access Oracle8i library files.
Pl suggest in this regard
Thanx in advance

Getting BSOD error while booting

Hi,
I am getting BSOD error while booting using bootable pendrive.
Could you guys please provide the possible solution
Regards,
Chandan

Hello,
To troubleshoot the issue, you need review the dump file. We may find out the which file or driver is triggering a BSOD. And in most cases, BSOD is triggered by driver issue.
Are you doing OS deployment via bootable pendeivce? How do you created the boot image?
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Pcipsy error while booting

I have installed a PCI audio card and its driver. While booting
I am getting following error
pcipsy: WARNING: pcipsy0: ino 23 is invalid
pcipsy: WARNING: pcipsy0: ino 10 is invalid
Can any one tell me what is causing this pci error?
Thanks

The most likely causes of this error are:
1) Failing to execute tmloadcf after updating the UBBCONFIG file.
2) Failing to set TUXDIR correctly in the UBBCONFIG file.
3) Failing to set TUXCONFIG, PATH, or
LD_LIBRARY_PATH(Unix)/SHLIB_PATH(HP)/LIBPATH(AIX) correctly in your
enviroment.when executing tmboot or tlisten.
You should verify that your environment is set correctly and you should
execute tmunloadcf to see the contents of the configuration file that has
been loaded.
Ed
<Kaustubh Deoghare> wrote in message news:[email protected]..
Hello,
I am getting following error while booting tuxedo
exec TMS_ORACLE8I -A :
TMS_ORACLE8I: symbol lookup error: TMS_ORACLE8I: undefined symbol:
kgsmp789_compat_
CMDTUX_CAT:819: INFO: Process id=2568 Assume started (pipe).
Though I have installed Oracle9i, in ubbconfig it is still taking
TMS_ORACLE8I and hence trying to access Oracle8i library files.
Pl suggest in this regard
Thanx in advance

USB error while booting

I'm getting this error while booting:
Waiting for UDev uevents to be processed
[ 3.631701] usb 1-1.1: unable to read config index 0 descriptor/all
[ 3.631811] usb 1-1.1: can't read configurations, error -32
[ 3.643141] hub 1-1:1.0: unable to enumerate USB device on port 1
I saw other thread in this forum but i can't find any solutions because I have no USB plugged in. Any suggestions?
Last edited by quiro91 (2012-06-26 09:17:08)

rc.conf -> http://pastebin.com/eJTXVt1L
mkinitcpio.conf -> http://pastebin.com/u90UQ8kt
udev is actually after base. I'm going to try linux-lts now, I'll let you know, and obviously thanks for your help
EDIT: using lts kernel, I rebooted 5 times and everything works fine, no error message at all
DSpider wrote:
Post these files (preferably using pastebin.com):
/etc/rc.conf
/etc/mkinitcpio.conf
"udev" should be after "base". For example:
HOOKS="base udev autodetect pata scsi sata usbinput filesystems fsck"
Then regenerate your initramfs:
# mkinitcpio -p [your linux preset, since you're using linux-ck... I don't know]
For the kernel from the [core] repo, it's:
# mkinitcpio -p linux
Speaking of kernels, does it happen with linux-lts too?
Last edited by quiro91 (2012-06-26 15:52:15)

Installing Arch Linux on USB key: error while booting

Hello,
first of all, I must say I've followed the steps from this article on arch wiki to install archlinux on my USB key: https://wiki.archlinux.org/index.php/In … _a_USB_key
So what I did is to use one of my 2 usb keys to INSTALL linux, and the second one to RUN linux. I used dd to write on the 1st usb, eveything worked fine when booting, then I do install arch on the my second usb following the stept from the link above, everything works until I get this error while booting (at the middle):
Waiting 10 seconds for device /dev/sdc/
Root device '/dev/sdc' doesn't exist. Attempting to create it.
ERROR: Unable to determine major/minor number of root device '/dev/disk/by-uuid/lotsofnumbers'
You are being dropped to a recovery shell
Type 'exit' to try and continue booting
/bin/sh: Can't contact tty; job control turned off
[ramfs /]#
To summarize I'll show you my conf files that could help you to resolve my problem:
/etc/fstab.conf
/dev/sdc1 /boot ext2 defaults 0 1
/dev/sdc2 / ext3 defaults 0 1
/dev/sdc3 /home ext3 defaults 0 1
So here I've sdc1 boot 32MB partition; sdc2 root 3GB partition; sdc3 home 978MB partition for a total of 4GB USB key~
I didn't make a swap partition as in the tutorial they are writing it's unnecessary for some kind of reasons.
/etc/mkinitcpio.conf
HOOKS="base udev usb autodetect pata scsi sata filesystems"
I've added to here, "usb" to the hooks
installed GRUB on my sdc, here is the menu.ist:
# (0) Arch Linux
title Arch Linux (USB)
root (hd0,0)
kernel /vmlinuz26 root=/dev/sdc ro vga=773
initrd /kernel26.img
So, I boot GRUB without problems, start Arch Linux, but then I got this error above.
I've searched alot on some forums and read many stuffs, but sitll can't fix it and it seems complicated.
I've tried to boot with UUID, also, but didn't make difference. I tried to remove some parameter from the hooks, but unfortunately this wasn't working still. I've read somewhere to use chroot, but I didn't catch on how to do that and what was the use of chroot, I'm still noob user of arch linux and currently learning. Maybe it's the problem, as some forum were talking about creating a new image, but I still don't know how to make it. By the way, I'm not sure this could have fixed my current problem. I've also read somewhere it could be due to my lack of space, but I wrote you how I did partition my USB key, let me know if you have any suggestion please.

1. What I did is re-installing entirely from my installation disk or USB to test out different setting in my config files, because I don't know how to edit my .conf as I can't really finish to boot to the end and get in terminal mode? If there is a quicker way to edit files from any terminal to go into my current USB sdc to modify directly my file from there, I'd enjoy probably. So rebuilding the initpio, no, I just re-installed to test out different configs.
2. Yes, same error.
3. Tested out by-id/by-path and uuid = no difference
4. Didn't know about larch, it seems to be a nice tool, I'll check it out

System hangs while booting 2.6.38

My system hangs, while booting 2.6.38
The picture from the screen is here: http://bildr.no/view/844865 (the picture is not mine, but it's the same).
/ is located on raid1 array. Boot is separated to ext2.
Grub:
# (2) Arch Linux
title Arch Linux
root (hd0,1)
kernel /boot/vmlinuz26 root=/dev/md1 ro md=1,/dev/sda2,/dev/sdb2 md=2,/dev/sda3,/dev/sdb3 radeon.modeset=1 elevator=noop
initrd /boot/kernel26.img
Tried nomodeset and removing "elevator=noop".
$ lspci
00:00.0 Host bridge: ATI Technologies Inc RD780 Northbridge only dual slot PCI-e_GFX and HT1 K8 part
00:02.0 PCI bridge: ATI Technologies Inc RD790 PCI to PCI bridge (external gfx0 port A)
00:04.0 PCI bridge: ATI Technologies Inc RD790 PCI to PCI bridge (PCI express gpp port A)
00:0a.0 PCI bridge: ATI Technologies Inc RD790 PCI to PCI bridge (PCI express gpp port F)
00:11.0 SATA controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode]
00:12.0 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
00:12.1 USB Controller: ATI Technologies Inc SB7x0 USB OHCI1 Controller
00:12.2 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller
00:13.0 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
00:13.1 USB Controller: ATI Technologies Inc SB7x0 USB OHCI1 Controller
00:13.2 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller
00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 3a)
00:14.1 IDE interface: ATI Technologies Inc SB7x0/SB8x0/SB9x0 IDE Controller
00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA)
00:14.3 ISA bridge: ATI Technologies Inc SB7x0/SB8x0/SB9x0 LPC host controller
00:14.4 PCI bridge: ATI Technologies Inc SBx00 PCI to PCI Bridge
00:14.5 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI2 Controller
00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor HyperTransport Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Miscellaneous Control
00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Link Control
01:00.0 VGA compatible controller: ATI Technologies Inc RV710 [Radeon HD 4550]
01:00.1 Audio device: ATI Technologies Inc RV710/730
02:00.0 SATA controller: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 02)
02:00.1 IDE interface: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 02)
03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03)
04:07.0 Network controller: Ralink corp. RT2800 802.11n PCI
04:0e.0 FireWire (IEEE 1394): Texas Instruments TSB43AB23 IEEE-1394a-2000 Controller (PHY/Link)
The same here: https://bbs.archlinux.org/viewtopic.php?id=115190
Last edited by vit (2011-03-24 03:59:23)

The system is booting and hangs in other place.
Updated to .38.1
Doesn't help.
Last edited by vit (2011-03-24 15:29:49)

OK - sorry - STOP: c000021a Fatal System Error : Help me help my girlfriend!

Ok - you've probably seen this before. Basically, my girlfriend was working at her laptop whereupon it suddenly gave her this error. She doesn't know what she was doing immediately prior to this event, and now it gives her this message whenever she attempts to log on. It seems to happen literally just before the box pops up asking for her login info. I'm basically trying to retrieve her files for her. (or salvage the entire thing - although this appears increasingly unlikely!). Here is a list of what I have tried to do...
(This was originally intended as a letter for someone who is a lot better than me with computers, but the girlfriend forgot to drop the computer off last time she was in the city - we live in the sticks.)
@page
{size:21cm 29.7cm;margin:2cm;}
P
{margin-bottom:0.21cm;}
Computer gets fatal system error c000021a status of 0x00000000( 0x00000000, 0x00000000 )
Tried to load up through safe mode, etc, same blue screen.
Tried the restore cd but it said it was the wrong one for this particular machine. However, by validating with the restore cd I'm able to access the OS set up screen.
From here, I tried to do a windows repair. Repair seemed to complete successfully, but I still got the blue screen on boot.
I then tried going through the recovery console with the intention of copying her files to a memory stick before reformatting. It seems I needed to set a number of variables, (eg. allowallpaths and allow removable media). However, I was unable to use the 'set' command (eg. Set allowremovablemedia =TRUE) since set is disabled. It seems that the security policy needs to be changed, but that this can only be done through windows rather than the recovery console. You can change it through the registry if you can infact access and change registry values from the recovery console.
After this, I did a chkdsk /p which revealed some errors, which I repaired (chkdsk /r), but this still had no effect.
I also tried to do automated system recovery but it wanted the asr disk inserted into the a: which I don't think we have. I was expecting it to allow me to specify a drive to save a backup to (hence use a memory stick), but again, I think this might only be possible from within windows. --------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Other thing to note is she is running service pack 2 (she thinks). I know this is SP3 forum, but I was pointed in this direction!
ANy help would be much appreciated. I've been searching the web for about 3 days for a solution, and plus I can't seem to find anywhere helpful with the exact same error message.

Rfrf
that error code means Bug Check 0xC000021A: STATUS_SYSTEM_PROCESS_TERMINATED. A restore wont fix it but a clean instal from the OS CD'S would. Does she have the OS cd's? Does she have a backup? Can she boot into safe mode (F8??)?
Wanikiya and Dyami--Team Zigzag

Help error while booting sunfire v440 (error)

Hi solaris admins.
i am getting the following error while trying to install the solaris 10 OS on a sunfire v440 server.Please can someone help me out here.i think the problem is with the Hard Drives or something.
=================================================
Sun Fire V440, No Keyboard
Copyright 2005 Sun Microsystems, Inc. All rights reserved.
OpenBoot 4.17.2, 8192 MB memory installed, Serial #63181061.
Ethernet address 0:3:ba:c4:11:5, Host ID: 83c41105.
Rebooting with command: boot cdrom
Boot device: /pci@1e,600000/ide@d/cdrom@0,0:f File and args:
SunOS Release 5.10 Version Generic_118833-33 64-bit
Copyright 1983-2006 Sun Microsystems, Inc. All rights reserved.
Use is subject to license terms.
=======================================================
Hardware watchdog enabled
Configuring devices.
WARNING: /pci@1f,700000/scsi@2/sd@0,0 (sd1):
Corrupt label; wrong magic number
WARNING: /pci@1f,700000/scsi@2/sd@2,0 (sd4):
Corrupt label; wrong magic number
========================================================
internal error: Bad file number
svc:/system/filesystem/local:default: WARNING: /usr/sbin/zfs mount -a failed: ex
it status 134
====================================================
Plese and advice and ideas are highly appreciated.
We Brain server.
Regards
Noa Junior Sys Admin

No clue why it's doing that when you're booting off
the CD though... I didn't think it checked. Hmmm.
boot cdrom will try and start the installer - not sure what happens if no valid disk label.
I do recall going through this (or something similar)
when the HD in my Blade 150 failed and I swapped in a
new one. I just formatted the drive, then I was
fine. Not sure HOW I formatted it though. Never
bothered to write it down, it seemed obvious at the
time :-(Could first try boot cdrom -s to just get a single user shell, and then run format just to create the disk labels.
If manually running format successfully labels the disks, then try running the installer (which should give the option of how to partition the disks).

[SOLVED] Error while booting, related to nilfs2

I've just installed my fresh Arch and used nilfs2 inside vlm2 as my home partition. While booting, I'm getting these errors:
fsck: fsck.nilfs2: not found
fsck: error 2 while executing fsck.nilfs2 for /dev/mapper/TheVG-HomeLV
Other logical volumes are getting "clean" output while checked so it's not vlm-related; they are all ext4.
Partition is mounted and seems to work but I'm scared of just ignoring it and creating my user. ;-)
I have nilfs-utils installed. Is there any hook or module I need to add somewhere in order to use nilfs2 properly (like reiserfs hook)? There is nothing in the Wiki about this file system...
Edit: well, it appears that nilfs doesn't not come with check utility so I'm marking this as solved; sorry for garbage post...
Last edited by smsware (2013-03-16 22:07:55)

As there is no fsck utility and as it actually is planned to be created (I read that it's needed because the fs can easily crash on power loss; still, it can be recreated, as you stated) - there is a warning while building the kernel. I deleted fsck hook to not see it as my /var and root are sub-volumes of btrfs partition which doesn't need fsck as well. I made a service to umount, fsck and mount back the /boot (ext4) and uefi partitions... just to let you know what you can expect. But it's great anyway, snapshots are really easy to mount and use. I thought it has no wiki page because it's not popular (and probably for a reason) but now I believe it's because there is nothing to write about... it just works. ;-)
Last edited by smsware (2013-05-29 15:58:26)

Error while booting or loading application server by runing psadmin.exe

HOw to upgrade the database to 8.49 from 8.48
also to update the patch to 8.49 need to be a customer id or licensed something like that...
i am using a trial version .....please suggest
==============ERROR!================
Boot attempt encountered errors!. Check the TUXEDO log for details.
==============ERROR!================
*Do you wish to see the error messages in the APPSRV.LOG file? (y/n) [n] :Y*
PSADMIN.1160 (0) [06/06/09 13:12:01](0) Begin boot attempt on domain orcl
PSWATCHSRV.3440 (0) [06/06/09 13:12:12] Checking process status every 120 second
s
PSWATCHSRV.3440 (0) [06/06/09 13:12:12] Server started
PSAPPSRV.3728 (0) [06/06/09 13:12:15](0) PeopleTools Release 8.49 (WinX86) start
ing
PSAPPSRV.3728 (0) [06/06/09 13:12:15](0) Cache Directory being used: C:\PTv849\a
ppserv\orcl\CACHE\PSAPPSRV_2\
PSAPPSRV.3728 (0) [06/06/09 13:12:15](1) GenMessageBox(200, 0, M): PS General SQ
L Routines: Missing or invalid version of SQL library PSORA (200,0)
PSAPPSRV.3728 (0) [06/06/09 13:12:15](1) GenMessageBox(0, 0, M): Database Signon
: Could not sign on to database ORCL with user PS.
PSAPPSRV.3728 (0) [06/06/09 13:12:15](0) Server failed to start
PSWATCHSRV.3440 (0) [06/06/09 13:12:16] Shutting down
PSADMIN.1160 (0) [06/06/09 13:12:22](0) End boot attempt on domain orcl
*Do you wish to see the error messages in the TUXLOG.060609 file? (y/n) [n] :y*
131215.TALENT!PSAPPSRV.3728.2056.0: LIBTUX_CAT:250: ERROR: tpsvrinit() failed
131215.TALENT!tmboot.3328.3968.-2: tmboot: CMDTUX_CAT:827: ERROR: Fatal error en
countered; initiating user error handler
131219.TALENT!BBL.2872.944.0: CMDTUX_CAT:26: INFO: The BBL is exiting system
131222.TALENT!PSADMIN.1160: End boot attempt on domain orcl

hi Nicolas,
thnks for ur reply.....
this is the link please check uptil yet what i have done now
peopleSoft HRMS and campus 9.0 db creation please help
can u please give the link to get the Peopletools installation Guide.
recentely i am using pdf named hwtools849_itora.pdf FOR Database creation
is it possible to update database from 8.48 to 8.49 by using trail version....so need to of any licensed
AS on this link "http://gasparotto.blogspot.com/2008/06/peoplesoft-server-on-windows-xp.html" there it is shown to use update path from ftp connection to get download..where i am not able to connect
6. PeopleTools 8.49 patch 11 - only if you are licenced - *(downloaded from ftp://ftp.peoplesoft.com/outgoing/ptools/84911)* From the extracted package, under disk1, run setup.exe, and follow the exact process as the previous one.
add to path i ave given :- C:\oracle\product\10.2.0\db_1\BIN
even thought i have set environment path
like
ORACLE_BASE = C:\oracle\product\10.2.0,
ORACLE_HOME = C:\oracle\product\10.2.0\db_1 ,
ORACLE_SID = orcl,
BEA_HOME = C:\bea ,
PS_HOME = C:\PTv849; (DIR WHERE INSTALLED PEOPLETOOL 8.49 + PEOPLESOFT HRMS & CAMPUS SOLUTION 9.0)
as u said
On Windows, into you appserver config file, you should give the path directory "Add to Path" to your ORACLE_HOME\bin folder, did you ?
please can u tell the appserver file with full path + name...by which ii can find....
thnks..
Edited by: user11084225 on Jun 6, 2009 2:14 AM
Edited by: user11084225 on Jun 6, 2009 2:15 AM

Error while booting Tuxedo

OS:HP-UX
Tux8.1 (32-bit)
I am getting below error while trying to boot the tuxedo app.
FATAL: conflicting options: CMDTUX_CAT:762: ERROR: LAN mode not specified for multiple node application
few other facts:
MODEL param is SHM
The TUXDIR, TUXCONFIG & other Env variables are set properly. I cleaned up all IPC resources but still no luck.
The same configuration was working before. Its when a day before we brought it down started giving trouble.
Pls advise.

Hi,
Can you post the entire *RESOURCES section of your ubbconfig file?
Also since this was working and has stopped, I'd verify that in fact there are no remaining processes hanging around. Ideally I'd reboot the machine to see if that clears it up.
Regards,
Todd Little
Oracle Tuxedo Chief Architect

Error while booting the server

I am getting error while starting weblogic saying system or admin
user not having enough permisssion.
Error Below shown
during initialization. Exception:java.lang.SecurityException: User admin is not
permitted to boot the server
java.lang.SecurityException: User admin is not permitted to boot the server
at weblogic.security.service.SecurityServiceManager.doBootAuthorization(
SecurityServiceManager.java:1076)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityS
erviceManager.java:1116)
at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:703)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:588)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:276)
at weblogic.Server.main(Server.java:31)
>

Make sure that you have fileRealm.properties in place and it is not screwed.
"Sanjay Parihar" <[email protected]> wrote:
>
I am getting error while starting weblogic saying system or admin
user not having enough permisssion.
Error Below shown
during initialization. Exception:java.lang.SecurityException: User admin
is not
permitted to boot the server
java.lang.SecurityException: User admin is not permitted to boot the
server
at weblogic.security.service.SecurityServiceManager.doBootAuthorization(
SecurityServiceManager.java:1076)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityS
erviceManager.java:1116)
at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:703)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:588)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:276)
at weblogic.Server.main(Server.java:31)
>

Error c000021a : {fatal system error} while booting laptop M30 series

Similar Messages

Maybe you are looking for