Error Caller 09 contains error message - Data Marts loading(cube to ODS)

Dear all,
          Please ! Help me in this problem, This is very urgent.
          I have one process chain that loads data from BIW to BIW only through Data Marts. In that process chain, one process loads data from one cube(Created by us) & loads data to one ODS(also created by us). Data is loaded through full update & for the selected period specified in 'Calender Day' field in data selection.
         Previously I was able to load data for 2 months, but some days ago, suddenly one day, the process of Extraction got stuck in background for long time,& showed following error :
          Error message from the source system
          Diagnosis
         An error occurred in the source system.
          System Response
         Caller 09 contains an error message.
         Further analysis:
         The error occurred in Extractor . 
         Refer to the error message.
         Procedure
         How you remove the error depends on the error message.
         Note
         If the source system is a Client Workstation, then it is possible that the file that you wanted to                load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request.
              Then we killed that process on server & after another attempt, It showed some calmonth...timestamp error. Then after reducing data selection period, It had been loaded successfully, after that I was able to load data for 20 days,Again after some days process got stuck,I followed the same procedure,reduced the period to 15 days & continued, Now I can't even load data for 5 Days successfully in one attempt, I have to kill that process in background & repeat it, then sometimes It get loaded.
         Pls, suggest some solutions as soon as possible. I am waiting for your reply. Points will be assigned.
         Thanks,
          Pankaj N. Kude
Edited by: Pankaj Kude on Jul 23, 2008 8:33 AM

Hi Friends !
                  I didn't find any short dump for that in ST22.
                  Actually , What happens is, Request continues to run in background for infinite time. At that time
Status Tab in Process Monitor shows  this messages :
                    Request still running
                    Diagnosis
                    No errors found. The current process has probably not finished yet.
                     System Response
                     The ALE inbox of BI is identical to the ALE outbox of the source system
                       or
                     the maximum wait time for this request has not yet been exceeded
                       or
                    the background job has not yet finished in the source system.
                   Current status
                   in the source system
                    And Details Tab shows following Messages :
                    Overall Status : Missing Messages or warnings
                    Requests (Messages) : Everything OK
                            Data Request arranged
                            Confirmed with : OK
                     Extraction(Messages) ; missing messages
                            Data request received
                            Data selection scheduled
                            Missing message : Number of Sent Records
                            Missing message : selection completed
                    Transfer (IDOCS and TRFC) : Everything OK
                            Info Idoc1 : Application Document Posted
                            Info Idoc2 : Application Document Posted
                     Processing (data packet) : No data
                    This Process runs for infinite time, then I have to kill that process from server, & Then It shows  Caller 09 Error in Status Tab
                    Should I Changed the value for that memory parameter of server or not ?. We r planning to try it today, Is it really belongs to this problem, Will it be helpful ? What r the risks ?
                    Please, give your suggestion as early as possible, I m ewaiting for your reply.
  Thanks,
Pankaj N. Kude

Similar Messages

  • VETS100A - Error - "Call contained error(s):ADS(2)

    Hi,
               When I executed the standard VETS report using VETS 100A form, I got the error "Call contained error: ADS(2)
    Message No. FPRUNX003
    When I executed it with VETS 100 form, it didn't display the job codes 00 and 01
    Any help is much appreciated
    Thanks

    Hi,
    Please check the OSS note 1372977.

  • SHR1 - Call contained Errors

    Hi,
    I am getting error for SHR1 Transaction.
    in SHR1 Transaction when i give Resource, and go for Generate Shift report i am getting this error.
    Error Message is FPRUNX003 and call contained errors:ADS(2).
    Can any one explain.
    Thanks
    Nag
    Edited by: nag1975 on May 18, 2010 7:38 AM

    Dear Nag,
    transaction SHR1 need ADS as precondition. As SHR1 display the result in PDF the installation of ADS is necessary. If ADS is not implemented or not correctly implemented you get error "Error Message is FPRUNX003 and call contained errors:ADS(2)."
    So please make sure adobe document services setup (ADS) is correct.
    Regards
    Sabine

  • Call contained error(s): ADS (2)

    Hi,
    I have created a print form using transaction code SFP. while testing system giving me an error My form and interface showing active and no errors
    <b>
    Call contained error(s): ADS (2)
    </b>
    How to avoid this.
    Sa_R

    Hello,
    are you sure that you have configured ADS on your J2EE engine?
    Thank you for the information.
    Best regards,
    Dezso

  • Data Mart load does not support Delta load?

    For data mart load, we create an InfoPackage for Delta load, under data selection tab, for the InfoObj. 0FISCPER, we pick OLAP variable 0FPER [Current Fiscal Year/Period (SAP Exit)], save this InfoPackage, but when get in again, find under Data Selection tab, on the row 0FISCPER, the From Value column becomes 001/2005 and To Value column becomes 011/2005 and the whole Data Selection tab screen becomes non-editable! 
    The correct behavior should be that after saving the InfoPackage on this row 0FISCPER, From Value/To Value columns are blank and just the Type column value is 7 and after saving the infopackage and get back in, the Data Selection tab screen is editable.
    But if we select Full update mode, then switch back to the Data Selection tab, then the behavior is right. 
    We wonder if SAP doesn't support Delta load for Data Mart load, why under the Update tab, the Delta load radio button shows up after we conducted an initial load?  It doesn't make any sense for SAP!

    Dear,
    as alredy suggested, you cannot do different selection criteria on your delta, since you automatically have to load on the basis of initial selection...and, if you think about it, this is logic: you cannot initialize a flow for certain conditions and then decide to upload in delta other (different) records...
    Hope now is clearer...
    Bye,
    Roberto
    clearly, if you perform a full (like a 'repair' full, from a functional point of view), this problem doesn't exist (data is taken from active table and not from change log one!)

  • Can we execute the Reporting while the data is loading into that ODS/Cube.

    Hi Friends,
          Can we execute the reports on particular ODS/InfoCube in the following cases
    1) When the data is loading into that ODS/Infocube.
    2) When we are Archiving the data from that ODS/Infocube
    Thanks & Regards,
    Shaliny. M

    Hi Shaliny,
    First of all you are in the wrong forum, in Business Intelligence Old Forum (Read Only Archive) you will find better support.
    In case you are loading data in an infocube you will be able to have report only until the request that has the icon ready for reporting filled. In case of an ODS object i don't think you will be able to have valid reporting since the ODS data firstly needs to be activated.
    Nevertheless please post your question in the above link.
    Kostas

  • After upgrade to BI NW4.0S issue in loading cube from ODS

    Hi,
      I have an SAP delivered ODS(0CRM_OPPT_H) which I was loading for some time. The cube 0CRM_C04 was loaded from the ODS a couple of times. I have now deleted all the data from the cube and want to load the data from the cube to ODS, In between our BW was upgrade frpm 3.5 to BI NW0S..
      I have done all prerequisite , replicated the 80 datsource , deleted and re activated the update rule and transfer rule again.. and then tried to load the Cube from ODS.. however everytime I am getting the following error
    DataSource 80CRM_OPPI does not have the same status as the source system in the Business Information Warehouse.
    The time stamp in the source system is 12/23/2005 10:09:36.
    The time stamp in the BW system is 11/09/2005 13:02:29.
    Is it due to the upgrade?? I have done everything so that this dosen't happen, still could not resolve..
    Thanks

    Are you sure you've replicated the DataSource 80CRM_OPPI? Try replicating it individually again. If that doesn't help, have you tried reactivating the ODS Object itself?
    Regards, Klaus

  • Error in SyncManager "INVALID MESSAGE DATA"

    Hello all,
    When trying to sync a new order i get the following message
    followed by the message saying order failed to sync
    Failed to send order alert.
    Invalid message data   [(----) 3581-8]
       at SAPbobsCOM.IMessagesService.SendMessage(Message pMessage)
       at NetPoint.SynchSBO.SBOObjects.SBOOrder.CreateMessage(String docEntry)
       at NetPoint.SynchSBO.SBOObjects.SBOOrder.PostSaveProcessing(String docentry, NPOrder order)
    i can't find any solutions on the forms. has anyone had this issue before
    points will be awarded accordingly
    Thank you.
    Edited by: Sebastiano Todaro on Oct 15, 2008 5:44 PM

    Ahhh... very interesting!
    And here I was blaming the DI API
    There are a couple things happening here.
    First, we probably should not allow you to create orders for the manager account in WT, since there is no such business partner in B1.  (You can't create an order for manager,manager in B1).
    Second, WT is not italicssupposeditalics synch orders created by manager manager.
    Is your manager manager account is correctly flagged as account type INTERNAL in Webtools?

  • URGENT: Data discrepency for Cube and ODS 0fi_ar_4

    Hi all,
    I am having problems for ODS 0fiar_o03 and Cube 0fiar_c03...
    They have been initialised a year  back and delta was running almost correctly since then. ..some sometime in August they started showing discrepency from standard R/3 code FBL5N.
    The cube and ODs are having exact data till 31/07.2006  .
    I tried to delete all data in Cube and ODs by selective deletion of fiscal periods 005.2006 to 008.2006 and reload again from R/3..but still data not matching. Why is that so?
    Please suggest steps to correct it. Will assign points.

    Dear Andy,
    First tell us that how can you say that data is inconsistent? I mean on what criteria you consolidate data.
    Secondly have you checked in R3 that after 31.07.2006 was there any change or anything new (company code or smthing) added.
    My suggestion would be;
    First:
    1. Go to RSA3 (in R3) and check that are you able to see(pull) the data you want.
    2. Now check wheather it is coming in BW or not?
    3. If coming then manually update cube through data mart.
    Second:
    1. if not able to get data through standard extractor then try to load by flat file. (last option)
    2. check wheather deltas after your repair full upload are giving you correct deltas or not? if not then re-initialize and reshedule deltas.
    Hope it helps, do revert.

  • Data mart loading failure in BW 3.5

    Hi
    We are working on BW 3.5 ( sp11)
    Loading from ODS to Cube ( Full load) is not possible.
    It doesnt show any error in Monitor.It says there may be
    short dump, but it neither shows the short dump details.
    Seeking help in solving this issue
    Regards
    PPRao

    Hi
    1. There are no routines in the update rule
    2. I can see following log in sm37
    Call up of customer enhancement EXIT_SAPLRSAP_001 (CMOD) with 2,597 records                          
    Result of customer enhancement: 2,597 records                                                        
    Asynchronous send of data package 000001 in task 0002 (1 parallel tasks)                             
    tRFC: Data package = 000001, TID = AC151B2A0DE64272F7490000, duration = 00:00:00, ARFCSTATE = SYSFAIL
    tRFC: Start = 04/29/2005 22:11:05, End = 04/29/2005 22:11:05                                         
    Call up of customer enhancement EXIT_SAPLRSAP_001 (CMOD) with 0 records                              
    Result of customer enhancement: 0 records                                                            
    Job finished  
    3. We have upgraded from 3.0B to 3.5 and its new development. So we are trying to load to datatargets which were in 3.0b

  • Data Marting from Infocube to ODS

    Hi,
    I am trying to extract information from an Infocube and load it into an ODS.  I generated the export datasource of the infocube and created update rules on the ODS from that generated infosource (8+infocube name).  Created an infopackage for the init, and the deltas.  When I try to load an init with data, it brings 0 rows, but when I do a full update, it brings all the rows from the infocube.  Even if I do an init w/o delta, and then do a delta afterwards, it does not bring any rows.  The problem with that is obviously our development system is small compared to our larger production system, and we cannot afford to do full loads every night.  Am I doing something wrong?  Do additive deltas work from Infocube datamarts?
    Thanks,

    Hi,
    If u dont roll up when u have aggregates, then the requests are not available for reporting. and its even not identified for next delta. So if u have aggregates, pls roll it up and then try pulling delta. Hope this time it will work.
    Regards
    Sriram

  • How to merge the data from two cubes into ODS?

    Hi,
    I wan to analyze the data of both the cubes by means of merging into an ODS.
    And i want to have one of the characteristic is used as a key for the purpose which is existing in both the cubes
    Cany nay one detail me of how this can be done?
    Thanks,
    Ravi

    Hi,
    If it is very needful.
    you can create the ODS object for each infocubes and map these ODS objects to target ODS object.
    or, you can create the Export datasources from each infocube and map these to new target ODS object which is having all the char and KF of both the infocubes.
    reg.
    Vis

  • How to delete historic data in a cube or ODS ?

    Dear Gurus,
    My ODS & BasicCube are having few historic records which I wanted to selectively delete.
    The don't have the Request ID number.
    I tried going to Cube --> Manage --> Contents tab --> Selective Deletion --> .....then what ??
    say, in the list of info objects (cube/ODS) for the Infoobject - AAA which is having the values "micro", I wanted to delete all the corresponding records from the other Infoobjects also.
    Please give you valuable suggestion.
    Regards,
    Venkat

    Dear Venkat,
    After selecting "Selective Deletion" you will get a new window. In the upper left corner there is a push buttom "Deletion Selections". After clicking on it you can enter the value "micro" for your InfoObject "AAA". Then you have to start the deletion job and that's it.
    Kind regards,
    Stefan
    PS: The naming I mentioned is from BI 7.0. In BW 3.x it might be slightly different.

  • Contains errors and distribution lock

    Hi all,
    We have a error as "contains error, distribution lock"(system status)in the status of the service confirmation. Document is in Open status and with this error any changes are not replicating to the r/3. This is the only one document with such error. All other confirmations are getting replicated to R/3. Bdoc error segment  for this confirmation is "NO upload into ERP,ERP adapter is called".
    How can I remove this error? Any reports available to remove? what is the cause for this issue?
    Thanks In Advance

    Hi,
    Please try to find the relevant bdoc in SMW01 . It is probably in intermediate status or there could be an error in the bdoc.
    The must be a pending outbound queue or inbound queue in SMQ1 or SMQ2 in CRM.
    One reason why the order is not uploaded properly can be due to filter settings in R3AC1 for object SALESDOCUMENT.
    I.e. you would not allow to download the same document to CRM and therefore the complete loop is not run ok.
    Please check R3ac1 as well.
    If this is sill not helping please check as well the report CRM_ODE_CHECK_CFG (as per note 490932) and check if there might be obvious settings which might block the data transfer of this order type.
    Best regards
    Christophe

  • XI - Call Adapter Error - HTTP client. Code 402 reason ICM_HTTP_TIMEOUT

    I am using HTTP adapter to post XML PO to vendor's site. We are having this problem with one of our vendor when PO's has more than 15 line items. XI server is getting error-"Call Adapter Error - HTTP client. Code 402 reason ICM_HTTP_TIMEOUT". Actually PO is posted good for the first time on vendor's site but XI is getting above error message and it keeps posting it again. Is there anyway to stop it otherthan manually stopping the XI message? Is there anyway to increase the wait time of the XI server to get the message.
    Thanks in advance.
    Mrudula Patel

    I'm getting the same issue "500 TIMEOUT error" in runtime work bench-->IE--->Test Message. When i manually trigger the file.
    The issue is basically from 01-01-2015 02:00 pm to 02-01-2015 01:am , File is picked from source ftp folder and places in archive but xml messages are not reflecting in SXMB_MONI.
    Today suddenly after 01:00 am messages are successfully processing.
    Please help on this issue. Many Thanks.

Maybe you are looking for

  • [SOLVED] Network manager only works as root

    Hello everyone, I am brand new to arch and have been quite impressed over the past few days over all it has to offer.  Everything has been running quite smoothly and I am now in the process of setting up wireless.  I installed network manager and was

  • Failed PO Release Procedure

    We added new set of release strategies to existing ones (SAP 4.. Since some of added release strategies no longer required,  the team deleted it. The characteristic used for the class are: 1.  PO Document TYpe 2.  PO Purchasing Group 3. PO Purchasing

  • Select for update query

    with : resultset = stmt.executeQuery("select nxtid from mytable .. for update"); I have the ora-1002 Erreur. Could you help me. null

  • Suppressing certain HTML tags before setting text to JEditorPane

    Sir, I am setting the text(html format) for JEditorPane using the setText(String) method. But I need to suppress all the <IMG> tags that are present in this text before setting it to JEditorPane. Is there any way in which I can write my extended HTML

  • Where is the Applet JAR file?

    When an Applet (the JAR) is downloaded to the local PC, exactly where (the directory) we can locate the Applet JAR file? Is the file managed by the Internet browser?