Error Calling Stored Procedure Receiver adapter

Hi Guys,
I am trying to send data to a stored procedure SQL server R2 2008 from SAP PI7.11.
Transport Protocol: JDBC2.0
Message Protocol : XMLSQLFORMAT
I am able to read from same database using sender adapter.
Name of SP: InderTest
Paramters in SP : @Carrier Varchar(20), @Location Varchar(20), @Product Varchar(20), @Zone Varchar(20),
@dteStart date, @dteEnd date, @strType Varchar(1), @intRate Float
<?xml version="1.0" encoding="UTF-8" ?>
- <ns0:MT_FreightPricing xmlns:ns0="http://na.holcim.com/pi/o2c/pricingmaster">
- <StatementName1>
- <InderTest action="EXECUTE">
<table>InderTest</table>
<Carrier isInput="true" type="VARCHAR">4000004</Carrier>
<Location isInput="true" type="VARCHAR">3600</Location>
<Product isInput="true" type="VARCHAR">3553</Product>
<Zone isInput="true" type="VARCHAR">Zone1</Zone>
<dteStart isInput="true" type="DATE">20110704</dteStart>
<dteEnd isInput="true" type="DATE">20120704</dteEnd>
<strType isInput="true" type="VARCHAR">A</strType>
<intRate isInput="true" type="FLOAT">10.00</intRate>
</InderTest>
</StatementName1>
</ns0:MT_FreightPricing>
Error in JDBC Receiver
Message processing failed. Cause: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Error processing request in sax parser: Error when executing statement for table/stored proc. 'InderTest' (structure 'StatementName1'): java.lang.IllegalArgumentException
Any clue...
I was reading this help document. They have mentioned 5 configuration step, i have worked on JDBC earlier but never did anything like that.... Any idea ?
http://help.sap.com/saphelp_nw70/helpdata/en/b0/676b3c255b1475e10000000a114084/content.htm
Regards
Inder

<table> element is optional in the structure. In that case you can try:
<?xml version="1.0" encoding="UTF-8" ?>
<ns0:MT_FreightPricing xmlns:ns0="http://na.holcim.com/pi/o2c/pricingmaster">
<StatementName1>
<InderTest action="EXECUTE">
<Carrier isInput="true" type="VARCHAR">4000004</Carrier>
<Location isInput="true" type="VARCHAR">3600</Location>
<Product isInput="true" type="VARCHAR">3553</Product>
<Zone isInput="true" type="VARCHAR">Zone1</Zone>
<dteStart isInput="true" type="DATE">20110704</dteStart>
<dteEnd isInput="true" type="DATE">20120704</dteEnd>
<strType isInput="true" type="VARCHAR">A</strType>
<intRate isInput="true" type="FLOAT">10.00</intRate>
</InderTest>
</StatementName1>
</ns0:MT_FreightPricing>
Regards
Raj

Similar Messages

Error calling stored procedure from MFC using odbc

Hello,
I am using MFC to call a stored procedure written in PL/SQL, but when I make the call I get the next error in Spanish:
"No se enlazaron columnas antes de llamar a SQLFetchScroll o SQLExtendedFetch", which more or less in English means:
"No rows were binded before calling SQLFetchScroll or SQLExtendedFetch".
I am using a CRecordset derived class to access the stored procedure. I am unable to find the error.
THE STORED PROCEDURE'S HEADER:
Sp_Int_Ot_Ordendetrabajoalta ( lineatrabajo NUMBER, lv_orden NUMBER, usuario
VARCHAR2, idvehiculo NUMBER, fechamax1 VARCHAR2, resumen VARCHAR2, detalle
VARCHAR2,
coderp VARCHAR2, numtrabrecibidos NUMBER, lv_CODOT VARCHAR2, retorno OUT
INTEGER)
THE .H FOR THE CRECORDSET DERIVED CLASS (Visual Studio 6 comments removed)
class CRecSP : public CRecordset
public:
CRecSP(CDatabase* pDatabase = NULL);
DECLARE_DYNAMIC(CRecSP)
CString m_szSQL;
long m_RETORNO;
virtual CString GetDefaultConnect();
virtual CString GetDefaultSQL();
virtual void DoFieldExchange(CFieldExchange* pFX);
THE .CPP FOR THE CLASS (VS6 comments removed)
IMPLEMENT_DYNAMIC(CRecSP, CRecordset)
CRecSP::CRecSP(CDatabase* pdb) : CRecordset(pdb)
m_RETORNO = 0;
m_nParams = 1;
m_nDefaultType = snapshot;
CString CRecSP::GetDefaultConnect()
return T( DBCONNECTION_STRING );
CString CRecSP::GetDefaultSQL()
return m_szSQL;
void CRecSP::DoFieldExchange(CFieldExchange* pFX)
pFX->SetFieldType(CFieldExchange::outputParam);
RFX_Long(pFX, _T("[retorno]"), m_RETORNO );
USING THE CRECORDSET DERIVED CLASS: (Vars read from EditBoxes as CStrings
and formatted in the SQL)
CRecSP *rec = new CRecSP(&db);
szSQL.Format( "{CALL
FGROT2005.SP_INT_OT_ORDENDETRABAJOALTA(%s,%s,'%s',%s,'%s','%s','%s','%s',%s,'%s',?)}",
szLinea, szOrden, "USER", szIdVeh, szFechaMax, szResumen,
szDetalle, "ERP", "0", szCodOT
rec->m_szSQL = szSQL;
//rec->Open( CRecordset::forwardOnly,szSQL,CRecordset::readOnly );
rec->Open( );
iError = rec->m_RETORNO;
rec->Close();

This forum is meant for discussions about OTN content/site and services.
Questions about Oracle products and technologies will NOT be answered in this forum. Please post your product or technology related questions in the appropriate product or technology forums, which are monitored by Oracle product managers.
Product forums:
http://forums.oracle.com/forums/index.jsp?cat=9
Technology forums:
http://forums.oracle.com/forums/index.jsp?cat=10

Error calling stored procedure from MFC.

Hello,
I am using MFC to call a stored procedure written in PL/SQL, but when I make the call I get the next error in Spanish:
"No se enlazaron columnas antes de llamar a SQLFetchScroll o SQLExtendedFetch", which more or less in English means:
"No rows were binded before calling SQLFetchScroll or SQLExtendedFetch".
I am using a CRecordset derived class to access the stored procedure. I am unable to find the error.
THE STORED PROCEDURE'S HEADER:
Sp_Int_Ot_Ordendetrabajoalta ( lineatrabajo NUMBER, lv_orden NUMBER, usuario
VARCHAR2, idvehiculo NUMBER, fechamax1 VARCHAR2, resumen VARCHAR2, detalle
VARCHAR2,
coderp VARCHAR2, numtrabrecibidos NUMBER, lv_CODOT VARCHAR2, retorno OUT
INTEGER)
THE .H FOR THE CRECORDSET DERIVED CLASS (Visual Studio 6 comments removed)
class CRecSP : public CRecordset
public:
CRecSP(CDatabase* pDatabase = NULL);
DECLARE_DYNAMIC(CRecSP)
CString m_szSQL;
long m_RETORNO;
virtual CString GetDefaultConnect();
virtual CString GetDefaultSQL();
virtual void DoFieldExchange(CFieldExchange* pFX);
THE .CPP FOR THE CLASS (VS6 comments removed)
IMPLEMENT_DYNAMIC(CRecSP, CRecordset)
CRecSP::CRecSP(CDatabase* pdb) : CRecordset(pdb)
m_RETORNO = 0;
m_nParams = 1;
m_nDefaultType = snapshot;
CString CRecSP::GetDefaultConnect()
return T( DBCONNECTION_STRING );
CString CRecSP::GetDefaultSQL()
return m_szSQL;
void CRecSP::DoFieldExchange(CFieldExchange* pFX)
pFX->SetFieldType(CFieldExchange::outputParam);
RFX_Long(pFX, _T("[retorno]"), m_RETORNO );
USING THE CRECORDSET DERIVED CLASS: (Vars read from EditBoxes as CStrings
and formatted in the SQL)
CRecSP *rec = new CRecSP(&db);
szSQL.Format( "{CALL
FGROT2005.SP_INT_OT_ORDENDETRABAJOALTA(%s,%s,'%s',%s,'%s','%s','%s','%s',%s,'%s',?)}",
szLinea, szOrden, "USER", szIdVeh, szFechaMax, szResumen,
szDetalle, "ERP", "0", szCodOT
rec->m_szSQL = szSQL;
//rec->Open( CRecordset::forwardOnly,szSQL,CRecordset::readOnly );
rec->Open( );
iError = rec->m_RETORNO;
rec->Close();

I am trying to pass parameter to test my procedure but it is giving this error : ORA-06531: Reference to uninitialized collection
ORA-06512: at line 12
Here is example for my test procedure:
declare
v_session_id_tab SESSION_ID_TAB_TYPE;
v_service_type_tab SERVICE_TYPE_TAB_TYPE ;
v_service_location_tab SERVICE_LOCATION_TAB_TYPE ;
v_service_call_name_tab SERVICE_CALL_NAME_TAB_TYPE;
v_service_call_start_time_tab SERVICE_CALL_ST_TAB_TYPE;
v_service_call_end_time_tab SERVICE_CALL_ET_TAB_TYPE;
v_service_call_duration_tab SERVICE_CALL_DUR_TAB_TYPE;
v_status_tab STATUS_TAB_TYPE;
v_notes_tab NOTES_TAB_TYPE;
begin
v_session_id_tab(1) := 1;
v_service_type_tab(1) := 'db';
v_service_location_tab(1) := 'local';
v_service_call_name_tab(1) := 'Name of call';
v_service_call_start_time_tab(1) := SYSDATE;
v_service_call_end_time_tab(1) := SYSDATE;
v_service_call_duration_tab(1) := 100;
v_status_tab(1) := 'Z';
v_notes_tab(1) := 'NOTES';
BULK_INSERTS (v_session_id_tab,v_service_type_tab, v_service_location_tab,v_service_call_name_tab,v_service_call_start_time_tab,v_service_call_end_time_tab,
v_service_call_duration_tab, v_status_tab, v_notes_tab);
end;
I declare all types at schema level.
Please give your comments.
Thank you

Calling Stored Procedure with CLOB parameter

Hi,
i have one procedure with IN parameter CLOB which is taking xml file and stored in one table column and this table column datatype is also CLOB. And this procedure called by .Net program but problem is when the file will come more than 32KB calling procedure failed. But as i know CLOB can stored up to 4GB data.
Is that Limitation of oracle or .Net version
please let me know the solution for that,
Create Procedure Insert_File(P_XMLFILE IN CLOB)
as
begin
insert into instances
values(p_xmlfile);
commit;
end;
regards,
Madan

Hi Thanks for your reply,
Actually this procedure called by .net program and the XML file has passed in that parameter which come from some FTP(its inbound) and this files we are storing into above mentioned table.
Error has come while calling stored procedure Through .net
Error Details:
Error calling stored procedure. 0 retry attemps has failed. Error: System.Exception: Error while calling stored procedure on Oracle: INSERT_FILE: System.Data.OracleClient.OracleException: ORA-01460: unimplemented or unreasonable conversion requested

JDBC-Adapter-Receiver Calling Stored Procedure with Input-Typ Record

Hallo,
I´ m trying calling a stored-procedure with two input-parameter; one of typ record (oracle) and one of type tabel of records. Is this possible (I think there are only types like string, integer etc. possible)? When not is there another possibility to work with that type?
Thanks in advance,
Frank

Hi Frank,
I think stored procedures will not take Array of Records as a Input. If you want to make a loop funtionality etc then JDBC adapter will work accordingly. You need to just call the stored procedure from the JDBC adapter. It will work for the array of records(multiple occurences).
Receiver JDBC Procedures.
/people/siva.maranani/blog/2005/05/21/jdbc-stored-procedures
Alternative option is you can make use of Java Proxy and from there you can call stored procedure ..I think it is possible.. not tried.
Hope this helps
Regards,
Moorthy

Calling Stored Procedure without JDBC-Adapter

Hallo,
as it is not possible calling Stored Procedures with the parameter Typ Record in Oracle my question: It is possible connecting to DB using native java-code for example in Mapping?
Thanks in advance,
Frank

Hi Frank,
Maybe you can use the DB look up using the JDBC adapter in your mapping.
Just check this blog for the same,
/people/siva.maranani/blog/2005/08/23/lookup146s-in-xi-made-simpler
As for calling an Oracle Strored Procedure, it is possible using a RECEIVER JDBC adapter, but not a SENDER JDBC adapter.
<i> import the jdbc-driver (oracle) in an archive in Designer.</i>
Also, this imported archive should be under any Namespace, but, it should be in the same SWCV as the one in which the mapping is being executed.
Regards,
Bhavesh

DB adapter calling stored procedure and change database schema

Hello,
when I create DB adapter which call stored procedure I find that is reference to DB schema in JCA file. Other DB adapter operation (select, insert, delete) store only connection-factory location.
What happend when I move procedure to another DB schema or rename DB schema?
It is only about change SchemaName in JCA file?
Thank you.

It sounds excelent.
I try it. Change JCA file and redeploy SCA of service.
Next I change user in data source (password is the same for both schemas). Save and activate changes. Update deployment of DBAdapter.
Select operation on service works but return data from old schema.
Call stored procedure fail with exception:
oracle.sysman.emSDK.webservices.wsdlapi.SoapTestException: Exception occured when binding was invoked. Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'delete' failed due to: Stored procedure invocation error. Error while trying to prepare and execute the NEW_SCHEMA.PKG_UTILS.SERVICE_REMOVE API. An error occurred while preparing and executing the NEW_SCHEMA.PKG_UTILS.SERVICE_REMOVE API. Cause: java.sql.SQLException: ORA-06550: line 1, column 7: PLS-00201: identifier 'NEW_SCHEMA.PKG_UTILS' must be declared ORA-06550: line 1, column 7: PL/SQL: Statement ignored Check to ensure that the API is defined in the database and that the parameters match the signature of the API. This exception is considered not retriable, likely due to a modelling mistake. To classify it as retriable instead add property nonRetriableErrorCodes with value "-6550" to your deployment descriptor (i.e. weblogic-ra.xml). To auto retry a retriable fault set these composite.xml properties for this invoke: jca.retry.interval, jca.retry.count, and jca.retry.backoff. All properties are integers. ". The invoked JCA adapter raised a resource exception.

Can JDBC adapter be scheduled to call stored procedures

Can JDBC adapter be scheduled to call stored procedure in other database passing previous date as input parameter

Hi Gurus,
actually our scenario is jdbc->XI( <-RFC->)->File
Here our payload is around 5000 records
can it be advisable to use rfc synchronous communication.
The scenario will be exected only in night times.so can we schedule the adapter as we are using sp9.
If not what must be the good design approach.
And also after scheduling to a perticular period ,if there is any down time of XI server,will the process start immediately after the sever up or it will again watch for that perticular time.

Call stored procedure with OUT parameter

Hello,
I have created a short-lived process. Within this process I am using the "FOUNDATION > JDBC > Call Stored Procedure" operation to call an Oracle procedure. This procedure has 3 parameters, 2 IN and 1 OUT parameter.
The procedure is being executed correctly. Both IN parameters receive the correct values but I am unable to get the OUT parameter's value in my process.
Rewriting the procedure as a function gives me an ORA-01460 since one of the parameters contains XML (>32K) so this is not option...
Has someone been able to call a stored procedure with an OUT parameter?
Regards,
Nico

Object is Foundation, Execute Script
This is for a query, you can change to a stored procedure call. Pull the value back in the Java code then put into the process variable.
import javax.naming.InitialContext;
import javax.sql.DataSource;
import java.sql.*;
PreparedStatement stmt = null;
Connection conn = null;
ResultSet rs = null;
try {
InitialContext ctx = new InitialContext();
DataSource ds = (DataSource) ctx.lookup("java:IDP_DS");
conn = ds.getConnection();
stmt = conn.prepareStatement("select FUBAR from TB_PT_FUBAR where PROCESS_INSTANCE_ID=?");
stmt.setLong(1, patExecContext.getProcessDataLongValue("/process_data/@inputID"));
rs = stmt.executeQuery();
rs.next();
patExecContext.setProcessDataStringValue("/process_data/outData", rs.getString(1));
} finally {
try {
rs.close();
} catch (Exception rse) {}
try {
stmt.close();
} catch (Exception sse) {}
try {
conn.close();
} catch (Exception cse) {}

Creation of DB Adaptert for calling stored procedure in MS SQL server

Hi,
I need to create a DB adapter to call a stored procedure in MS SQL Server.
I have gone thru the thread MS SQL Server database connection
It mentions that we need to use a command line utility for generating the wsdl and xsd for calling stored procedures in MS SQL server. Please provide information where to find this utility and how to use it.
Any links to tutorials are welcome.
Thanks !!.
Silas.

Command line is required for stored procedures, if you are using the basic options you don't need to worry.
(1) Download MS SQL Server 2005 JDBC Driver from Microsoft Site. http://msdn.microsoft.com/en-us/data/aa937724.aspx
(2) The download is self extracting exe file. Extract this into Program Files on your machine. It should create folder as "Microsoft SQL Server 2005 JDBC Driver"
(3) In above mentioned folder search for sqljdbc.jar copy this file into JDeveloper\JDBC\lib folder.
(4) Open JDeveloper/jdev/bin/jdev.conf file add following entry.
AddJavaLibPath C:/Program files/Microsoft SQL Server 2000 Driver for JDBC/lib
While executing this step make sure that your JDeveloper is closed.
(5) On command prompt go to J Developer folder and execute following command
jdev -verbose
This will open JDeveloper.
(6) Now go to JDeveloper > Connections > Database Connections > New Database Connection
(7) Select Third Party JDBC
(8) Specify MS Sql Server User Name, password and Role.
(9) In connection page specify following
- Driver Class: com.microsoft.sqlserver.jdbc.SQLServerDriver
- For class path browse to C:/Program files/Microsoft SQL Server 2000 Driver for JDBC/lib folder, select sqljdbc.jar add it as library.
- Specify URL as following.
jdbc:sqlserver://SERVERNAME:1433;databaseName=MSSQLDBNAME;
(10) Go to Test page and test it.
cheers
James

Calling Stored Procedure from Oracle DataBase using Sender JDBC (JDBC-JMS)

Hi All,
We have requirement to move the data from Database to Queue (Interface Flow: JDBC -> JMS).
Database is Oracle.
*Based on Event, data will be triggered into two tables: XX & YY. This event occurs twice daily.
Take one field: 'aa' in XX and compare it with the field: 'pp' in YY.
If both are equal, then
if the field: 'qq' in YY table equals to "Add" then take the data from the view table: 'Add_View'.
else if the field: 'qq' in YY table equals to "Modify" then take the data from the view table: 'Modify_View'.
Finally, We need to archive the selected data from the respective view table.*
From each table, data will come differently, means with different field names.
I thought of call Stored Procedure from Sender JDBC Adapter for the above requirement.
But I heard that, we cannot call stored procedure in Oracle through Sender JDBC as it returns Cursor instead of ResultSet.
Is there any way other than Stored Procedure?
How to handle Data Types as data is coming from two different tables?
Can we create one data type for two tables?
Is BPM required for this to collect data from two different tables?
Can somebody guide me on how to handle this?
Waiting eagerly for help which will be rewarded.
Thanks and Regards,
Jyothirmayi.

Hi Gopal,
Thank you for your reply.
>Is there any way other than Stored Procedure?
Can you try configuring sender adapter to poll the data in intervals. You can configure Automatic TIme planning (ATP) in the sender jdbc channel.
I need to select the data from different tables based on some conditions. Let me simplify that.
Suppose Table1 contains 'n' no of rows. For each row, I need to test two conditions where only one condition will be satisfied. If 1st condition is satisfied, then data needs to be taken from Table2 else data needs to be taken from Table3.
How can we meet this by configuring sender adapter with ATP?
================================================================================================
>How to handle Data Types as data is coming from two different tables?
If you use join query in the select statement field of the channel then whatever you need select fields will be returned. This might be fields of two tables. your datatype fields are combination of two diff table.
we need to take data only from one table at a time. It is not join of two tables.
================================================================================================
Thanks,
Jyothirmayi.

Calling Stored Procedure with OraClob as parameter IN

I am using Visual C++ and using oo4o the ole way
I am try to call stored procedure that have Clob as parameter in
it seems the the OraParameters Add method don't have the ability since it can only receive variantt.
How do I do it
Thanks
Yoav

fyi
Related to the solution/workaround posted by Luc.
see "Do Oracle's JDBC drivers support PL/SQL tables/result sets/records/booleans? "
at http://www.oracle.com/technetwork/database/enterprise-edition/jdbc-faq-090281.html#34_05
regards
Jan Vervecken

Calling stored procedure in OCCI

Hi, Guys.
I triy to call stored procedure in Oracle database server.But i have problems with taking of the OUT parameters.
How to call the procedure corectly?
Depend on Oracle manual everything is fine but as we see that is not.
Here is the 2 lines that make the problem.
statement->registerOutParam(2, Type::OCCIINT, sizeof ( if_false ) );
statement->registerOutParam(3, Type::OCCIString, sizeof ( __result ) );
I can't access Type::OCCIINT and Type::OCCIString.
I tried and Type::OCCISTRING but without any result.
Can you help me?
This is the all code i use:
Environment *env = Environment::createEnvironment ( Environment::DEFAULT );
Connection *conn = env->createConnection ( user, pass, osid );
Statement * statement = conn->createStatement ( query );
ResultSet * result = statement->executeQuery ( query );
result->setCharacterStreamMode ( 2, 10000 );
statement->setSQL ( "BEGIN tracetst.get_tst_moduls ( :1, :2, :3 ); END:" );
int if_false;
string __result;
statement->setString ( 1, "116714020010" );
statement->registerOutParam(2, Type::OCCIINT, sizeof ( if_false ) );
statement->registerOutParam(3, Type::OCCIString, sizeof ( __result ) );
statement->executeUpdate();
if_false = statement->getInt (2);
/* Set the 1,2 args into err_result and modules. The action is only with these */
err_result = if_false;
__result = statement->getString (3);
cout << if_false;
cout << __result;
//printf ( result );
//statement->executeUpdate ( query );
env->terminateConnection ( conn );
Environment :: terminateEnvironment ( env );
While compiling I have an error message.Here it is :
trace.cpp: In member function `const char* oracle_io::get_data()':
trace.cpp:668: error: `oracle::occi::Type' is not an aggregate type
Tha is the line adn the next line is same :
statement->registerOutParam(2, Type::OCCIINT, sizeof ( if_false ) );
statement->registerOutParam(3, Type::OCCIString, sizeof ( __result ) );
How to call the procedure corectly?
Depend on Oracle manual everything is fine but as we see that is not.
Thanks in advance.
P.S. I would like to thanks to Amogh for helping me before.

Did you remove the colon after END ?
        Environment *env = Environment::createEnvironment(Environment::OBJECT);
        Connection *conn = env->createConnection("scott","tiger","inst1");
        Statement *stmt;
        int num; string name;
        try
                stmt=conn->createStatement();
                stmt->setSQL ( "BEGIN scott.test ( :1, :2, :3 ); END;" );
                stmt->setString ( 1, "11" );
                stmt->registerOutParam(2, OCCIINT,sizeof(num));
                stmt->registerOutParam(3, OCCISTRING,sizeof(name));
                stmt->execute();
                num=stmt->getInt(2); name=stmt->getString(3);
                cout<<num<<"   "<<name<<endl;
        catch (SQLException &ex)
                env->terminateConnection(conn);
                Environment::terminateEnvironment(env);
                cout<<ex.getMessage();
        env->terminateConnection(conn);
        Environment::terminateEnvironment(env);
...Rgds.
Amogh

Calling stored procedure from EJB in JSever

I have some trouble to call stored procedure from EJB deployed to JServer on Oracle8i (815).
I have been able to sucessfully test the stored procedure using thin client JDBC driver. But when I user the default connection in JServer, the stored procedure never got called. Is there any restriction of EJB in JServer?
Thanks
null

Thanks man! that was a great help. looks like i am almost there. i created those items t obe hidden.
now i am passing three parameters to the procedure. my url for that column value looks like this,
javascript:P65_PARTITION_ID=#PARTITION_ID#;P65_DBC=#DBC#;P65_FILE_ID=#FILE_ID#;doSubmit('Sku_Save');
the #DBC# parameter is a name of the person that has spaces(firstname lastname). i am getting a javascript error saying,
Line: 1
Char: 37
Error:Expected ';'
i see that char 37 is the space after firstname.
any idea how i should get rid of this error.
Also, as you have been very helpful, a question further beyond :). the above procedure will return a OUT varchar parameter. i guess i have to create another item for that. how do i read it and display just below my report as text.
Thanks Again!

Problems calling stored procedure with DG4IFMX

Hi guys,
I am trying to call stored procedures from Informix Database which is connected through Oracle Database Gateway for Informix.
I have run select,update,delete successfully but when i try to run a stored procedure nothing happens.
for example :
when i run
call "branko"@link_informix(1)
it returns that it is successfully executed, without any error, but as u can see bellow no entry is entered in the branko_test table
at informix :
drop procedure branko;
create procedure "informix".branko(_vlez integer)
returning boolean;
if _vlez = 1 then
insert into branko_test values('test uspesen','1');
else
insert into branko_test values('test uspesen 2','2');
end if;
end procedure;
the procedure runs ok when called from informix.
Thank you for any help
P.S i have even tried running:
declare
ret integer;
begin
ret := DBMS_HS_PASSTHROUGH.EXECUTE_IMMEDIATE@link_informix('execute procedure branko(2)');
end;
but the same thing is happening, no entry in the table branko_test.

Found the root cause:
when using dbaccess to call the original procedure it reports on the screen (expression)
=> removing the return value as it is not handled
-> looks like the unhandled return value boolean. Modifying the procedure to
drop procedure branko;
create procedure "informix".branko(_vlez integer)
if _vlez = 1 then
insert into branko_test values('test uspesen','1');
else
insert into branko_test values('test uspesen 2','2');
end if;
end procedure;
allows me to execute the procedure using passthrough
DECLARE
result VARCHAR2(50);
BEGIN
result := DBMS_HS_PASSTHROUGH.EXECUTE_IMMEDIATE@dg4ifmx('execute procedure informix.branko(1)');
END;
Edited by: kgronau on May 6, 2011 7:31 AM

Error Calling Stored Procedure Receiver adapter

Similar Messages

Maybe you are looking for