Error --can not load the specified XML or schema source
HI All
I am facing a problem while creating a xml maps connection. i am using ms excel 2007 and xcelcious 2008 engage. when i am trying to create a xml maps connection and give my url then open then give my user id and password its says can not load the specified XML or schema source..
my url is working fine when i open it through internet explorer.
anything i miss somewhere?
please help.
Regards
Amiya
Hi Guys
This is solved i removed <?xml version="1.0" ?> from top and buttom
then it worked fine.
Regards
Amiya
Similar Messages
-
Cannot load the specified XML or schema source
I was trying to create a sample output file in xml format for AOK interface. In our XIDEV system I have created an data type for each segment that needs created. I am still learning, but I thought my next step was to save the file as an xsd. I then tried to open the .xsd as an xml source layout in excel but I keep getting an error that says unable to input file layout. My intent is to take an existing order and convert to xml format to send to Masterbrands so they can get a feel for what an xml file looks like.
If anybody would have a few minutes to get me pointed in the correct direction I would greatly appreciate.I will be glad to assign points for any help.hi,
1. create a data type
2. create a message typeout of it
3. create a message mappinng in with the source structure will
be your message type
go to the test tab of the message mapping
fill in the XML values and use " source" button to get an XML file - this file you can send to your parnter
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a> -
Can not load the Sonivox 250 Meg GM Wave table into soundfonts manag
I have an Creative Xi-FI platnium and no matter what I try I can NOT load this sound font.. I can load it into Vienna soundfont manager.. I have tried adjusting the cache level (I have 2 GB of RAM BTW in my system), I keep getting an error can not load. Please HELP!!! I even tried the registry edit.. It did not help one bit.. appears its an issue with the program! What should I do?
hmmm for some reason when you call your EJB and it throws an exception, the JTA transaction is marked as rollbakc so the BPEL EM engine fails to save the instance.
Could you please provide us some additional pieces of information:
obversion.bat.
The exact exception that your EJB throws.
JTA configuration of your bean
Have you looked at the BankTransfer demo?
Edwin -
I can not load the Oracle Applications Home Page E-Business Suite
I install ebs 12.1.1 on windows server 2003 and I can not load the Oracle Applications Home Page (http://ebsoracle.workshop.cl:8000)
What could be the cause?
Is there a log with information about this failure?
I check the host file and this is correct
Help me please.
Thanks.I install ebs 12.1.1 on windows server 2003 and I can not load the Oracle Applications Home Page (http://ebsoracle.workshop.cl:8000)
What could be the cause?What is the error?
Is there a log with information about this failure?
I check the host file and this is correctCheck Apache log files (error_log* and access_log* under $LOG_HOME/ora/10.1.3/Apache directory).
Also, run AutoConfig and make sure it completes successfully.
Thanks,
Hussein -
OWB 11gR2 - Internal ERROR: Can not find the ACL containter
OWB 11gR2 - Internal ERROR: Can not find the ACL containter
=======================================
I am using OWB 11gR2 (11.2.0.1) on Win XP 32 bit. I have 3.23 GB RAM. OWB design center is ver slow on my desktop. We have our OWB repository is on Unix server.
We applied the patch 10270220.
We are getting
Internal ERROR: Can not find the ACL containter for object:CMPPhysicalMap@19654/id=104020/owningFCO=104020/proxyFor=(CMPPhysicalMapGen@19f99ae/id=104020/stname=null/pname=MAPPING_1/lname=MAPPING_1/status=POSTED/committed=true/persistent=true/propsLoaded=true)
What is happening here?
Thanks in helping.We have a map with 3 sources and 1 target. The 3 sources pass through Joiner then Expression then Target.
We are getting this error, during deployment. It shows compling for awhile, then through this error.
Here is the piece from detail window:
===========
at oracle.wh.repos.pdl.security.SecurityPolicyManager.getAccessCharMapOfPrivilegeOwner(SecurityPolicyManager.java:174)
at oracle.wh.repos.impl.foundation.CMPElement.getAccessCharMapOfPrivilegeOwner(CMPElement.java:2806)
at oracle.wh.repos.pdl.security.OWBSecurityImpl.hasPrivilege(OWBSecurityImpl.java:914)
at oracle.wh.repos.pdl.security.OWBSecurityImpl.internalSecurityCheck(OWBSecurityImpl.java:1542)
at oracle.wh.repos.pdl.security.OWBSecurityImpl.securityCheck(OWBSecurityImpl.java:694)
at oracle.wh.repos.pdl.security.SecurityModuleImpl.securityCheck(SecurityModuleImpl.java:959)
at oracle.wh.repos.pdl.security.SecurityModuleImpl.securityCheck(SecurityModuleImpl.java:924)
at oracle.wh.repos.pdl.dispatcher.EventDispatcherImpl.beforeReadObject(EventDispatcherImpl.java:824)
at oracle.wh.repos.pdl.foundation.OWBRoot.beforeRead(OWBRoot.java:1785)
at oracle.wh.repos.owbGen.CMPStringPropertyValueGen.getValue(CMPStringPropertyValueGen.java:217)
at oracle.wh.repos.impl.properties.CMPStringPropertyValue.getValue(CMPStringPropertyValue.java:117)
at oracle.wh.repos.impl.extended.PropertyFactory.getStringValue(PropertyFactory.java:440)
at oracle.wh.repos.impl.extended.CMPWBPrimitiveProperty.rawStringValue(CMPWBPrimitiveProperty.java:260)
at oracle.wh.repos.sdk.mapping.WBMapHelper.getStringProperty(WBMapHelper.java:716)
at oracle.wh.repos.sdk.mapping.WBMapHelper.getStringProperty(WBMapHelper.java:733)
at oracle.wh.repos.sdk.mapping.WBMapHelper.getReferencedLocations(WBMapHelper.java:1361)
at oracle.wh.service.impl.runtime.EnvironmentUtils.getReferencedLocations(EnvironmentUtils.java:284)
at oracle.wh.service.impl.runtime.EnvironmentUtils.getReferencedLocations(EnvironmentUtils.java:141)
at oracle.wh.service.impl.runtime.EnvironmentUtils.getReferencedLocations(EnvironmentUtils.java:135)
at oracle.wh.service.impl.runtime.RuntimePlatformServiceImpl.getReferencedLocations(RuntimePlatformServiceImpl.java:1238)
at oracle.wh.ui.runtime.application.WHRuntimeCommandUtil.addConnectorLocations(WHRuntimeCommandUtil.java:477)
at oracle.wh.ui.runtime.application.WHRuntimeCommandGenerateDeploy.getSingleDeployLocations(WHRuntimeCommandGenerateDeploy.java:3408)
at oracle.wh.ui.runtime.application.WHRuntimeCommandGenerateDeploy.getLocationsAndNewConnectors(WHRuntimeCommandGenerateDeploy.java:3517)
at oracle.wh.ui.runtime.application.WHRuntimeCommandGenerateDeploy.doPreDeploymentActions(WHRuntimeCommandGenerateDeploy.java:3224)
at oracle.wh.ui.runtime.application.WHRuntimeCommandGenerateDeploy._internalDeploy(WHRuntimeCommandGenerateDeploy.java:2420)
at oracle.wh.ui.runtime.application.WHRuntimeCommandGenerateDeploy.doDeploymentAsynch(WHRuntimeCommandGenerateDeploy.java:2117)
at oracle.wh.ui.runtime.application.WHRuntimeCommandHandler$1.construct(WHRuntimeCommandHandler.java:1005)
at oracle.wh.ui.runtime.SwingWorker$2.run(SwingWorker.java:124)
at java.lang.Thread.run(Thread.java:595)
===========
Did anyone receive such errors? -
Nternal ERROR: Can not find the ACL containter for object ...
We are using OWB 10.2.0.3. We tried to introduce two basic roles to prevent user A from accessing certain parts of our project. Somehow (I cannot really say how) we ended up in the error message below whenever we want to modify the security properties of an object.
Neither in metalink nor in the oracle forums I could find any hint about that error.
Can anyone help??
Thanks in advance, Maren
Internal ERROR: Can not find the ACL containter for object:CMPMap@1ba11bc/id=2023180/owningFCO=2023180/proxyFor=(CMPMapGen@1a4d5c6/id=2023180/stname=CMPBatchMap/pname=LOAD_XML/lname=LOAD_XML/status=CLEAN/committed=true/persistent=true/propsLoaded=false)
Internal ERROR: Can not find the ACL containter for object:CMPMap@1ba11bc/id=2023180/owningFCO=2023180/proxyFor=(CMPMapGen@1a4d5c6/id=2023180/stname=CMPBatchMap/pname=LOAD_XML/lname=LOAD_XML/status=CLEAN/committed=true/persistent=true/propsLoaded=false)
at oracle.wh.repos.pdl.security.SecurityPolicyManager.getAccessCharMapOfPrivilegeOwner(SecurityPolicyManager.java:166)
at oracle.wh.repos.impl.foundation.CMPElement.getAccessCharMapOfPrivilegeOwner(CMPElement.java:2743)
at oracle.wh.repos.pdl.security.OWBSecurityImpl.hasPrivilege(OWBSecurityImpl.java:820)
at oracle.wh.repos.pdl.security.OWBSecurityImpl.internalSecurityCheck(OWBSecurityImpl.java:1449)
at oracle.wh.repos.pdl.security.OWBSecurityImpl.securityCheck(OWBSecurityImpl.java:649)
at oracle.wh.repos.pdl.security.SecurityModuleImpl.securityCheck(SecurityModuleImpl.java:660)
at oracle.wh.repos.pdl.security.SecurityModuleImpl.securityCheck(SecurityModuleImpl.java:623)
at oracle.wh.ui.common.WhSecurityHelper.securityCheck(WhSecurityHelper.java:112)
at oracle.wh.ui.console.commands.EditObjectCmd.performAction(EditObjectCmd.java:107)
at oracle.wh.ui.console.commands.TreeMenuHandler$1.run(TreeMenuHandler.java:188)
at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:189)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:478)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:201)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:151)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:145)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:137)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:100)Hi Maren
Like you I get this error and do not know what steps caused it.In my scenario I have some mappings that give the error and some that do not - the repository user gets the error but the repository owner does not.
Thinking back over the last number of months (as this project contains 7-8 months od work - we do have exports of the project) I think the ones giving the error are those that perhaps were copied from another to start the coding but I cannot be sure.
I have read the metalink note mentioned above as well as the the queries posted by Oleg and yourself. The queries posted are slightly different, one has a where clause
fco.classname = 'CMPACLContainer' (Maren's)
and the other
fco.classname='CMPMap' (Oleg's).
Was this intentional Maren on your behalf for your problem to be fixed?
We are using 10.2.0.3.33 OWB client and 10.2.0.3.0 OWB repository.
Thanks
Edwin -
My problem is a sudden loss of ability to get to PSE12 Organizer when I tried to load a saved scan. Had been using the Organizer and the Editor with no problems for several hours just before that.
Can not load the Organizer from the icon at the bottom of Editor screen, from the icon on the MacBook Air dock (OS 10.10.2), nor from the file in applications located with Finder.
I have tried without success to access Organizer after turning off and on the scanner, turning off and on the computer, loading a fresh copy of PSE12 from the CD, and restoring default preferences. I have searched on line for other options but not found any.
Can you help me?Not Charge
- See:
iPod touch: Hardware troubleshooting
iPhone and iPod touch: Charging the battery
- Try another cable. The cable for 5G iPod (lightning connector) seems to be more prone to failure than the older cable.
- If a 5G iPod
Iphone 5 lightning port charging problem - SOLUTION!
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
Hello! I can not load the Mountain Lion of the App Store.
Hello! I can not load the Mountain Lion of the App Store. IMac-2009.
A few seconds of spinning circle and nothing else happens.http://forums.adobe.com/thread/1195540
-
Recently upgraded to windows XP from NT and get the error "can not load control"
I am using a LabVIEW VI to run two Opteon digital cameras. Originally, they were run off a Windows NT machine, however it ran out of hard drive space and we had to upgrade to a Windows XP machine. I installed all the new drivers from Opteon, however when I run the VI on the new system it does not load the image viewer or scroll bars and I recieve the error "could not load control". The control for the view screen is "MVCamView" and the control for the scrollbars is "MSForms.IScrollbar". The drivers sent to me by Opteon work fine, as the free program that Opteon sent has no problems.
Hi, Tsumma33
Thank you for the question. Try uninstalling all components of iTunes in the order specified of the article below. Once this is done attempt to install iTunes again.
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/ht1923
You may need to process the steps in the article below for each component when uninstalling iTunes if the issue persists.
"The feature you are trying to use is on a network resource that is unavailable" alert when removing Apple software in Windows
http://support.apple.com/kb/TS3704
Cheers,
Jason H. -
Error:Could not find the specified responsibility
Hi all,
i have this problem i can't solve. i have put the application short name and the responsibility key but it is not working, what shall i do???
thanx
oracle.apps.fnd.framework.OAException: Application: ICX, Message Name: Could not find the specified responsibility.
at oracle.apps.fnd.framework.CreateIcxSession.getEncryptedSessId(CreateIcxSession.java:158)
at oracle.apps.fnd.framework.CreateIcxSession.createSession(CreateIcxSession.java:80)
at runregion.jspService(runregion.jsp:96)
at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:56)
at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:317)
at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:465)
at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:379)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:727)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:306)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:767)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:259)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:106)
at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:803)
at java.lang.Thread.run(Thread.java:534)Ashwin,
This is a generic error which might happen due to many reasons. Check the above replies. If they don't help, put your complete error stack message.
--Shiv -
Error "can not start the configuration in parallel does not correct"
Hello everybody,
I have Windows 7 SP1, and when I install Business Objects 4.1 Client, it is install correctly but when i execute the program, for example BO Rich Client, an error appear "can not start the configuration in parallel does not correct" Could you help me?
Thanks in advance!Check this KB
1678498 - BI 4.0 Universe Designer Gives Side-by-Side configuration incorrect Error -
My laptop died. The hard drive is in a case and accessible. It is connected to a 10 year old Pentium. How can I retrieve the bookmarks file from the Laptops drive when I can not load Firefox from that drive? I.e., I can not get to the library on the Laptop drive. I do have full access to it.
You can locate main bookmarks file, '''places.sqlite''', for restoration in another Firefox install, in your profile directory.
Since you profile is on another hard drive, the normal shortcuts to find it won't work.
On Windows XP, you can find the profile here:
''C:''\Documents and Settings\''Windows login/user name''\Application Data\Mozilla\Firefox\Profiles\''xxxxxxxx.default''
Where:
* C:\ is replaced by the drive letter you mounted the laptop drive on.
* Windows login/username is replaced with your windows user name you used on that hard drive.
* xxxxxxxx.default is replaced with 8 random characters followed by .default, and should be the only folder in Profiles.
Once you've found the old profile, you can copy files over to a new profile. See https://support.mozilla.com/en-US/kb/Profiles#How_to_find_your_profile and [[Recovering important data from an old profile]] for other files you may want to restore. -
HT6117 Error : Can not start the service "Apple Mobile Device"
I get this error message of Can not start the service "Apple Mobile Device" please verify if you have enough permission to start a service. I have tried reinstalling itunes but could not get rid of the error. I use Win 7 64bit OS. Please help me to resolve the issue
Thanks
VenkySee Troubleshooting issues with iTunes for Windows updates.
tt2 -
Right, so I have a windowsform with lots of Textboxes, where the user can type in Information, and then hit "Save", once its saved it goes into a sortof XML Format
<?xml version="1.0" encoding="utf-8"?>
<!--Database-->
<Case>
<Person>l<Driver></Driver><License-Holder></License-Holder><Address></Address><Phone></Phone><Date-of-Birth></Date-of-Birth><Registration></Registration>
Like that.
Now, on my Startup Form (The main form) there is a Listview that I gave the name Objectlist1. This list displays ANY file located in a specific folder on my computer. This is also where the Saved files appear.
The list also updates every 5th second so after you save it appears quickly.
Now, the Files are saved using the content or Value of the first Textbox:
Dim XmlWrt As XmlWriter = XmlWriter.Create("C:\Users\USER\Desktop\TESTFOLDER\" + Firsttextbox.Text, settings)
So it appears in the folder and on the list with the value inserted in the first Textbox.
My problem comes when I want to load this back (Or reverse the function if you will)
Where I can go to the Objectlist1/Listview, either doubleclick a file or Mark a file, and hit my button "Retrieve"
I want the Form where you could input all the values to show - which it does
And the information from the XML/File saved to appear where it once was typed or inserted.
Here is an example of the code used to save the values from the Textboxes;
Private Sub Savebutton_Click(sender As Object, e As EventArgs) Handles Savebutton.Click
If IO.File.Exists(Pholderbox.Text) = False Then
Dim settings As New XmlWriterSettings()
settings.Indent = True
Dim XmlWrt As XmlWriter = XmlWriter.Create("C:\Users\USER\Desktop\TESTFOLDER\" + Pholderbox.Text, settings)
With XmlWrt
' Write the Xml declaration.
.WriteStartDocument()
' CLIENT
' Write a comment.
.WriteComment("Database")
' Write the root element.
.WriteStartElement("Case")
' Start our first person.
.WriteStartElement("Person")
.WriteString(Textbox1.Text)
' The person nodes.
.WriteStartElement("Driver")
.WriteString(Textbox2.Text)
.WriteEndElement()
I've tried multiple codesamples but they all give either "XML Not found" or such Overloads.
This is the current code I used when trying to make it work
Private Function ReadSettingsXML(ByVal path As String) As MySettings # On Debug It marks here and tells me it wasn't found.
Dim thisSettingsInfo As New MySettings
If My.Computer.FileSystem.FileExists(Objectlist1.SelectedItems.ToString) Then
Dim settingsInfo = XElement.Load(Objectlist1.SelectedItems.ToString)
If settingsInfo IsNot Nothing Then
For Each mainGroup As XElement In settingsInfo.Elements
If mainGroup.Name = "<Database>" AndAlso mainGroup.HasElements Then
For Each subGroup As XElement In mainGroup.Elements
If subGroup.Name = "<Person>" Then
thisSettingsInfo.Textbox1 = subGroup.Value
ElseIf subGroup.Name = "<Driver>" Then
thisSettingsInfo.Textbox2 = subGroup.Value
ElseIf subGroup.Name = "<Address>" Then
thisSettingsInfo.Textbox3 = subGroup.Value
End If
Next
End If
Next
Else
thisSettingsInfo = Nothing
Throw New Exception("The settings XML file is corrupt and cannot be read.")
End If
Else
thisSettingsInfo = Nothing
Throw New Exception("The settings XML file could not be located.")
End If
Return thisSettingsInfo
End Function
Private Sub LoadXML_Click(sender As Object, e As EventArgs) Handles LoadXML.Click
Dim settings As New MySettings
settings = ReadSettingsXML(Objectlist1.SelectedItems.ToString)
If settings IsNot Nothing Then
Dim sb As New System.Text.StringBuilder
With settings
Caseworker.Textbox1.Text = .Person
Caseworker.Textbox2.Text = .Driver
Caseworker.Textbox3.Text = .Address
End With
End If
End Sub
Also, the "Caseworker" is the form where all the textboxes are located.
Been stuck on this for two working days, so any help is highly appreciated
Codesamples are also highly welcome so I can see what the heck you did and find and answer to my problems.I found a code that might be close to what I'm looking, but as of this code used here, it looks for a static document that already exist and is located in the code.
See this one here, checks for the XML file, and since I can't link one program to 1 file, when its gonna have and use 100's of files.
If (IO.File.Exists("MyXML.xml")) Then
Same here with the static document.
Dim document As XmlReader = New XmlTextReader("MyXML.xml")
While (document.Read())
Dim type = document.NodeType
'if node type was element
If (type = XmlNodeType.Element) Then
If (document.Name = "FirstName") Then
TextBox1.Text = document.ReadInnerXml.ToString()
End If
If (document.Name = "LastName") Then
TextBox2.Text = document.ReadInnerXml.ToString()
End If
End If
End While
Am I at least close here, people?
Can anyone help with the now critical issue I got?
I basically need to change these two;
If (IO.File.Exists("MyXML.xml")) Then
Same here with the static document.
Dim document As XmlReader = New XmlTextReader("MyXML.xml")
To whatever value, so they read from the file SELECTED in my Listview
Cos the program saves files according to the info inserted in textboxes, so it can have whatever name you can think of, I need the program to "find and load" that file, once its selected, and then once I hit Retrieve or LOAD or whatever button, it
injects the info from the File to the correct Textboxes.
And I think this will work to get the info in the right boxes;
If (document.Name = "FirstName") Then
TextBox1.Text = document.ReadInnerXml.ToString()
End If
If (document.Name = "LastName") Then
TextBox2.Text = document.ReadInnerXml.ToString()
Any good advise? I'm stranded here. -
Can not load the module fglrx,Why
Today i update the ati-drivers-arch to ati-fglrx, then i usr aticonfig tools to generate xorg.conf and restart my computer. but the module fglrx does not to be loaded.
Hello,
I have problem with fglrx. Xorg can't load it.
Here is the error:
(II) LoadModule: "fglrx"
(II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
dlopen: /usr/lib/xorg/modules/drivers/fglrx_drv.so: undefined symbol: __glXActiveScreens
(EE) Failed to load /usr/lib/xorg/modules/drivers/fglrx_drv.so
(II) UnloadModule: "fglrx"
(EE) Failed to load module "fglrx" (loader failed, 7)
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input/mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 1.0.3
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.5
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input/kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 1.0.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.5
(EE) No drivers available.
Fatal server error:
no screens found
This happend after upgrading ati drivers(before switch to ati-fglrx).
Here is some info:
xorg.conf:
Section "ServerLayout"
Identifier "Server Layout"
Screen "Screen0" 0 0
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
Section "Files"
RgbPath "/usr/share/X11/rgb"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/local/"
FontPath "/usr/share/fonts/cyrillic/"
FontPath "/usr/share/fonts/misc/"
FontPath "/usr/share/fonts/75dpi/:unscaled"
FontPath "/usr/share/fonts/100dpi/:unscaled"
FontPath "/usr/share/fonts/Type1/"
FontPath "/usr/share/fonts/75dpi/"
FontPath "/usr/share/fonts/100dpi/"
EndSection
Section "Module"
Load "dbe" # Double buffer extension
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection
Load "type1"
Load "freetype"
# This loads the GLX module
Load "dri" # libdri.a
EndSection
Section "InputDevice"
Identifier "Keyboard1"
Driver "kbd"
Option "AutoRepeat" "500 30"
Option "XkbRules" "xorg"
Option "XkbModel" "pc101"
Option "XkbLayout" "us"
Option "XkbOptions" "compose:ralt"
Option "XkbVariant" ""
EndSection
Section "InputDevice"
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"
Option "Device" "/dev/input/mice"
# When using XQUEUE, comment out the above two lines, and uncomment
EndSection
Section "Monitor"
Identifier "Monitor0"
EndSection
Section "Device"
# BusID "PCI:0:10:0"
# VideoRam 256
# Clocks 25.2 28.3
Identifier "Standard VGA"
Driver "radeon"
VendorName "Unknown"
BoardName "Unknown"
EndSection
Section "Device"
# ### generic DRI settings ###
# === disable PnP Monitor ===
#Option "NoDDC"
# === disable/enable XAA/DRI ===
# ### FireGL DDX driver module specific settings ###
# === Screen Management ===
# Note: When OpenGL Overlay is enabled, Video Overlay
# will be disabled automatically
# vendor=1002, device=4153
Identifier "ATI Graphics Adapter"
Driver "fglrx"
Option "no_accel" "no"
Option "no_dri" "no"
# === misc DRI settings ===
Option "mtrr" "off" # disable DRI mtrr mapper, driver has its own code for mtrr
Option "DesktopSetup" "(null)"
Option "ScreenOverlap" "0"
Option "GammaCorrectionI" "0x06419064"
Option "GammaCorrectionII" "0x06419064"
# === OpenGL specific profiles/settings ===
Option "Capabilities" "0x00000000"
Option "CapabilitiesEx" "0x00000000"
# === Video Overlay for the Xv extension ===
Option "VideoOverlay" "on"
# === OpenGL Overlay ===
Option "OpenGLOverlay" "off"
# === Center Mode (Laptops only) ===
Option "CenterMode" "off"
# === Pseudo Color Visuals (8-bit visuals) ===
Option "PseudoColorVisuals" "off"
# === QBS Management ===
Option "Stereo" "off"
Option "StereoSyncEnable" "1"
# === FSAA Management ===
Option "FSAAEnable" "no"
Option "FSAAScale" "1"
Option "FSAADisableGamma" "no"
Option "FSAACustomizeMSPos" "no"
Option "FSAAMSPosX0" "0.000000"
Option "FSAAMSPosY0" "0.000000"
Option "FSAAMSPosX1" "0.000000"
Option "FSAAMSPosY1" "0.000000"
Option "FSAAMSPosX2" "0.000000"
Option "FSAAMSPosY2" "0.000000"
Option "FSAAMSPosX3" "0.000000"
Option "FSAAMSPosY3" "0.000000"
Option "FSAAMSPosX4" "0.000000"
Option "FSAAMSPosY4" "0.000000"
Option "FSAAMSPosX5" "0.000000"
Option "FSAAMSPosY5" "0.000000"
# === Misc Options ===
Option "UseFastTLS" "0"
Option "BlockSignalsOnLock" "on"
Option "UseInternalAGPGART" "yes"
Option "ForceGenericCPU" "no"
Option "KernelModuleParm" "agplock=0" # AGP locked user pages: disabled
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Device "ATI Graphics Adapter"
Identifier "Screen0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
# initial origin if mode is smaller than desktop
# Virtual 1280 1024
Viewport 0 0
Depth 24
Modes "1024x768"
EndSubSection
EndSection
Section "DRI"
Mode 0666
EndSection
[root@Sonic ~]# lsmod |grep fglrx
fglrx 436032 0
agpgart 29904 2 sis_agp,fglrx
[root@Sonic ~]# uname -a
Linux Sonic 2.6.15-ARCH #1 SMP PREEMPT Sun Feb 12 18:36:42 CET 2006 i686 AMD Duron(tm) Processor AuthenticAMD GNU/Linux
Maybe you are looking for
-
Dear Guru, I have run the payroll of April 08 with old income tax slab Now, Before running the May 08 payroll if I apply the new income tax slab and all budget changes 2008-2009 then, will the system calculate the taxes according to the new budget c
-
How do I get presenter tab to show up in powerpoint?
I downloaded the trial version of presenter 7 (and later got an update 7.01) It worked for about a half hour, while I was recording audio over a powerpoint it came up with a serious error and said to uninstall and re-install. Did that now when I open
-
Issue with Multithreading and vertical scroll bar - help needed to debug!!!
I have been working on a desktop Visual Studio 2010 application for quite a few years. It is written in C++ and MFC. This code is a combination of code I have written and code I inherited. It worked great for years on Windows XP, but when I ported it
-
PC Laptops connect to Airport but not Internet
I've got a DSL connection coming into my Airport Extreme Base Station (AEBS). I have my MacBook connected through Wi-Fi and a XP PC connected through Ethernet. Both can connect fine to internet and AEBS. However, when I try and connect my work laptop
-
How can I change the name of a Sub Circuit in Multisim
How can I change the name of a sub-circuit in MultiSim? For example: I have a sub-circuit named "Output Channel 1" and its RefDes is SC1. How do I change its name to 'Input Channel 1'?